Believe in Innovation Enjoy the power
A global organization at your service JBC is a global company with a distributor network spanning 5 continents that guarantees a solid commercial organization with quick and efficient service.
High Technology for quality soldering The JBC Exclusive Heating System JBC’s stations work with the JBC Exclusive Heating System which recovers tip temperature extremely quickly. This increases work efficiency and allows the user to work with lower temperatures.
The power of experience More than 80 years of experience have placed JBC at the technological forefront of tools for soldering and rework operations in electronics. Innovation, efficiency and reliability are the key features of a wide range of products which have been designed to satisfy the most demanding requirements of professionals.
350ºC in 2 seconds temp
350ºC
Difference in Thermal response: 8 sec.
20ºC
time
2
4
6
8
10
High technology, superior quality Product perfection is one of the main objectives of JBC’s improvement and development program. The R&D department has created the most innovative soldering technologies, which JBC is proud to present in this catalogue.
Enhanced Temperature Efficiency
Increase Productivity + Better Quality
Efficient Temperature Control Comparative process of 3 solder joints temp
350ºC
ESD safe
335ºC avg. temp.
320ºC
300ºC avg. temp.
All JBC products comply with CE standards and EDS recommendations.
Time exceed 5,5 sec.
280ºC 2
JBC Soldering SL. reserves the right to update, modify or delete any information without previous notice.
2
JBC Another top brand
4
6
8
35ºC difference of temp. drop
time
10
The Intelligent Heat Management The JBC equipment also incorporates the Sleep & Hibernation modes to help extend tip life by further reducing the temperature when the tool is not in use. As a result, tip life increases by 5.
temp
The Sleep function automatically reduces tip temperature when the tool is in the stand. When the set time for Sleep mode is up, the station automatically goes to Hibernation. The power supply is cut and the tip remains at room temperature.
Sleep & Hibernation
T work T sleep Work
Hibernation
Sleep
Work
from 0 to 60 min. (programmable)
T amb
time
0
Tool in the stand
2sec.
Tip life
Tip life increases exponentially by using lower temperatures as shown. Using the Sleep mode the temperature is further reduced, which extends tip life by 5.
Tip life up to 5x longer
5x 4x 3x 2x 1x 1/2x 0
temp
180ยบC Sleep
350ยบC Set point
400ยบC
450ยบC
Cartridges with extended tip life The essential part of the soldering iron is the tip so JBC has over 400 models of cartridges of different sizes and shapes to choose from depending on each application. JBC has developed the most advanced technology based on the following principles:
Excellent Heat Transfer The compact element reduces thermal barriers.
Instantaneous Heating Up A fully integrated thermal sensor in the heater ensures quick temperature recovery.
Great Durability The intelligent algorithm control program extends tip life.
3
Compact line Everything you need in the minimum footprint All in One Control Unit + Stand + Cleaning
Each unit meant for a specific purpose
Suit position JBC stations are designed to suit the user’s work position. The tool stand and the cable collector are easily adjustable.
Quick tip changer
Intelligent Heat Managament The stations incorporate the Sleep & Hibernation features that lower tip temperature when the tool is placed on the adjustable stand. As a result, a JBC’s tip life lasts up to 5 times longer than other brands.
Save time and increase productivity by using the quick cartridge changer. Simply insert the cartridge, remove it and introduce a new one without having to turn off the station. This allows you to work on different soldering jobs.
Communication station-PC JBC wants to take you beyond the station by means of a USB-B connection to your computer. You can update station software, create graphs of the soldering process and manage or monitor parameters via your PC.
Process screen The User Friendly Menu allows you to personalize over 20 parameters to help manage the soldering process. Set temperature limits, check usage counters, lock the station with a PIN or program Sleep & Hibernation features.
Tip Cleaning System The CD stations feature a tip cleaner with a new antisplash rubber to prevent splashing of solder particles and maintain the work area clean. The most complete cleaning system allows you to choose from 3 safe methods according to your needs: metallic wool, sponge or metal brush. The integrated wiper also allows you to remove excess solder from the tip single-handedly.
4
Soldering CD-B Soldering station For general electronic applications. Includes the T245-A General Purpose Soldering Iron.
CD-S Precision Soldering station For precision electronic applications. Includes the T210-A Precision Soldering Iron.
CA Solder Feed station For intensive and/or single handed soldering jobs. Includes the AP250-A Solder Feed Iron.
T245-A
Rework
T210-A
CP Micro Tweezers station For soldering and desoldering small and medium SMD components. Includes the PA120-A Micro Tweezers.
CV Micro Desoldering station with Pneumatic pump
CS Micro Desoldering station with Electric pump
For desoldering jobs in precision electronic applications. Includes the DS360-A Micro Desoldering Iron.
For desoldering jobs in precision electronic applications. Includes the DS360-A Micro Desoldering Iron.
5
Cartridge Map C105
¥
C105-126
ø 0,1
ø 0,3
C105-101
C105-103
ø 0,5
ø 0,8
C105-106
C105-107
Stainless steel tip 0,7
3,5
C105-111
C120
0,3
2,5
C105-118
1 x 0,3
0,2 x 0,1
0,4 x 0,2
0,6 x 0,3
C105-116
C105-117
C105-108
ø 0,5
C105-105
C105-110
1,3 x 0,3
1,8 x 0,5
1,6 x 0,3
C105-120
C105-115
1 x 0,2
C105-125
1 x 0,3
1,8 x 0,5
ø 0,6
C105-113
C105-114
C105-109
0,3
2,4 x 0,6
0,7
3,5
Ø2,5
Ø 2,5
Ø 2,5
Ø2,5
Ø 2,5
Ø 2,5
C105-213
C105-221
C105-222
C105-214
C105-223
Chips Components
Dual in Line
1,5mm
C120-002
C120-902
Chips Components
1,5mm
ø 0,5
1,5mm
ø 0,3
1,5mm
ø0,7
C120-006
ø0,7
C120-004
Blade type
C120-012
C105-212
C120-007
C120-008
QFP y PLCC
Dual in Line
A
C420-280 A = 11,0 mm C420-279 A = 8,0 mm
C130-401
C210
C130-402
ø 2,2
Ø 1,7
ø1
C130-403
C420-285 C420-278 C420-277 C420-276 C420-275 C420-274 C420-273
A = 22,0 mm A = 20,0 mm A = 15,0 mm A = 10,0 mm A = 8,0 mm A = 6,0 mm A = 4,0 mm
C130-409
Ø4
ø3
m
12 C420-281 C420-282 C420-281 C420-282
øA
C130-410
C130-416
15,6 2
A = 3,5 mm max.
C420-286
C420-287
C130-417
2,2x1
C130-404
ø 0,3
ø 0,3
ø 0,5
ø 0,6
ø1
C210-020
C210-009
C210-016
C210-001
C210-013
C210-003
C210-005
C130-405 ø 0,2
C130-406 ø 0,5
ø 0,3
C210-002
C130-418
C210-010
1,3x0,4
2,3x0,7
1,3x0,6
2,4 ø1
0,7
0,3
3,4
Ø 2,1 Ø 1,1
0,4
C210-014
C210-004
A
1,2
C210-006
To solder through hole ø2 components ø 0,7 on multilayer PBCs
0,8 5
5
ø1
4,5
0,8x0,3
C130-419
ø 0,7
To solder inside a connector 0,6x0,3
4,8x1,5
3,2x1,5
1,2x0,7
ø 0,2
0,4x0,2
C120-010
6m
3,5
1,8x0,8
ø 0,1
0,2x0,1
C120-010
SPECIAL
ø 0,8 ø 0,6
C120-009
14,3
A
C130
5mm
C120-005
Cable Stripper
A
C420-283 A = 50 mm
C120-001
C120-009
C120-008
mm
3mm
C120-003
ø 0,2
C120-011
A
C420-271 A = 1,5 mm C420-272 A = 2,6 mm
0,6mm
5mm
2,5
Ø 2,5
C105-211 C120-007
ø 0,2
C420
C105-124
High Thermal Permformance
ø 0,3
ø 0,1
ø 0,1
1
1
C105-112
Over 400 Cartridges & Customized models
2,3
VIEW A 2:1
C210-019
C245
0,6x0,3
C210-023
0,8x0,3
1,2x0,3
0,8x0,6
C245-731 C245-773 245-673*
C210-021
C210-024
1,2x0,7
C210-022
1,2x0,7
C210-008
C210-018
ø 0,3
ø 0,5
ø 0,4
ø 0,5
ø 0,8
ø 0,6
ø 0,6
ø 2,2
ø 0,6
ø 0,6
C245-748 C245-749
C245-962 C245-862*
C245-963 C245-863*
Hoof tip with reduced tinned surface, ideal for touch-up
Cartridges to solder SMT IC
3x1
3,2x1,5
2,2x1
C245-946 C245-846*
C245-732
Chip Components
ø 0,4
C245-761
ø 1,2
ø 1,5
ø 2,2
ø 1,5
ø 3,5
ø3
C245-034 C245-029 C245-126 C245-929 C245-935 C245-234* QFP y PLCC
ø1
ø3
ø2
ø 1,5
ø 2,3
ø4
C245-904 C245-259 C245-260 C245-627 C245-628 C245-804*
4,5x1,8
ø 1,3 Tinned
For PLCC Sockets
Blade type
A QFP
C245-009
6
A
PLCC
C245-010
C245-064
C245-102
0,4
B
C245-019 C245-018 C245-017 C245-016
A = 4,5 A = 3,4 A = 2,2 A = 1,9
A
B
C245-226 C245-215 C245-304 C245-305 C245-306 C245-222 C245-303 C245-221 C245-250 C245-220
A = 15,2 B = 29,0 A = 9,6 B = 18,0 A = 9,6 B = 15,0 A = 9,6 B = 12,0 A = 9,6 B = 10,0 A = 7,1 B = 13,0 A = 6,5 B = 6,0 A = 5,4 B = 10,0 A = 5,4 B = 8,0 A = 5,4 B = 6,0
B
A
C245-227 C245-315 C245-228 C245-224 C245-223
A A
0,5
6
13
13,5
A A
B
A = 17,5 B = 17,5 A = 15 B = 15,0 A = 12,4 B = 15,0 A = 12,0 B = 12,0 A = 8,5 B = 8,5
C245-938 A = 3,8 mm C245-931 A = 2,7 mm C245-965 A = 1,9 mm
Bevel Edge Tips
6
ø 2 Tinned
ø5
ø 3,8
øA
C245-067
0,4 4,5x1,8
5x1,7
4,8x1,5
C245-747 C245-710 C245-905 C245-405 C245-945 C245-784 C245-912 C245-056 C245-951 C245-766 C245-845* C245-812* C245-256*
ø 0,8
ø 0,6
Dual in Line
4,8x1,5
4,8x1
Mini Spoon
ø 0,4
ø 0,4
C210-017
4x0,8
3,2x1,2
2,7x1
ø 0,6
ø3
C245-030 C245-032 C245-036 C245-930 C245-001 C245-937 C245-957 C245-903 C245-403 C245-943 C245-933 C245-107 C245-201* C245-803*
1,8x0,8
C210-015 3,2x1,2
C245-759 C245-770 C245-741 C245-729 C245-061 C245-911 C245-775 C245-755 C245-756 C245-908 C245-708 C245-069 C245-811* C245-808*
ø 1,7
ø1
ø1
2,4x0,6
2,4x0,3
C245-966 C245-866*
1,2x0,7
C210-025 3x1
2,2x1
2,2x1
C245-742 C245-774 C245-906 C245-406 C245-768 C245-944 C245-907 C245-407 C245-806* C245-844* C245-807*
6,6x1,8
C210-012
2,4x0,5
1,8x0,8
1,5x0,3
C210-007
C245-247 N. of contact positions = 44 A = 17,0 B = 17,0
C245-248 N. of contact positions = 32 A = 11,9 B = 14,5
C245-776 C245-949 C245-913 C245-752 C245-914
A = 37 A = 32 A = 21 A = 15 A = 10
C245-939
C245-765
C245-955
See the full range on our website Cartridges with chrome finish, designed for use in plastics
Cartridges with Cable big contact soldering surface to solder wide area
13 ø 3,2 ø6
ø7
ø 3,8
ø 4,9
ø 6,5
ø 4,1
4
4,3x0,1
4,25x2 0,7
12
Rework blade
Pure nickel tip for HMP (High Melting Point) soldering
C245
Ideal to reach joints
SPECIAL
ø 0,5 1
0,4
ø 8,8
20
Through hole Tip with an soldering extra tinned surface
ø1
10
ø1
ø 1,45
1,4x0,7
12
TINNED
ø5
PTFE coated tip
ø 2,9
6
C245-053 C245-052 C245-054 C245-138 C245-312 C245-313 C245-124 C245-123
C245-121 C245-109
C245-311
C245-301
C245-118 C245-119
C245-117
C245-041
Fast soldering on contacts in male To solder inside a connector connectors 5
1,4
C245-136
C250-402
90º
90º
90º
1,25
6,7x1,8
3,2
1,5
4,3
2 2,5
1,4
2,5
1,5x0,5 14,5
13,5
2
3,25 1,25 3
0,75 3 3
6
C245-763
C245-760
ø 1,7
C250-403
C245-762
C245-150
1,2x0,7
C250-410
C245-757
C245-758
3,5
6
C250-405
C250-406
C250-412
C245-754 C245-654*
1,2x0,7
3,2x1,5
2,2x1
C250-404
C245-122
4,8x1,5
1,8x0,8
ø 2,2
C250-409
C245-785
C245-764
3,25 1,25 3 3
1x0,1
3 12
4
13
4
5x1,2
6x1,7
6x1,5
C250-418
C250-407
4x2,5
C250-408
C470-013 C470-036 C470-014 C470-040 C470-035
C470-017
C470-002
C470-015
C470-004
C470-016
C470-039
C250-411
C250-413
C250
ø 3,8
C250-414
C250-415
C470
ø 1,7
8,9 x1,7 ø 3,5 ø 7,5
10x2,5
Y
C245-771
ø 2,2
2,2 x 1
3,5x1,5
15,5x2,5
7,5x1,7
7,5x1,5
C245-667
4,8x1,5
4x1,3 4x1,3 2x1
C245-751 C245-651*
2,2x1
5,5x1,5
2x0,9
C245-772
2,2
C245-116
“
C250-401
6 0,
3
ø 0,6
C250-420
1,5
tinned length 3,5
ø 0,8 ø 0,4
3
3,5
1
1
R1
C245-268
5 2,5
R2
4
0,9
R4,5
1,5
6,5 7,1
C245-730
Through hole drag soldering
C470-006
C470-009
C470-007
C470-034
C470-018
C470-019
C470-003
C470-001
C470
ø 3,4 10,4
10,4
2,5
12
ø 3,5
4
SPECIAL
28x4
R6
R6
2,5
ø 12,2 ø 4,2 ø 15
6x1,8 15 x 10
22
R8
2,4
TINNED
32,2
3,2
43
15
5 5
10 20
C470-023
C470-005
C470-010
C470-038
C470-020
C470-021
C470-022
C470-027
C470-044
C470-031
1,2 24
1
C470-032
C470-028
90º
12,7x1,9 7,9x1,8
7x1,8
5
3,65 4
C470-029
90°
C470-030
Ø15
8
3,6
90°
3
4,8
1,1
90º
2,5
7,5
7,5
Ø12 5
1,5
120º
90°
C470-033
C470-037
C470-041
7,5
4,5
2,4
C470-042
C470-046
C470-043
C360
Pad Cleaning Tips Aø
Bø
Aø
C360-001
C360-002
C360-003
C360-004
ØA = 1 mm ØA = 1,2 mm ØA = 1,4 mm ØA = 1,6 mm ØB = 0,6 mm ØB = 0,8 mm ØB = 1 mm ØB = 1,2 mm Ømax. pin = 0,4 mm Ømax. pin = 0,6 mm Ømax. pin = 0,8 mm Ømax. pin = 1 mm
C560-001
C560-002
C360-007
C360-006
ØA = 1,9 mm ØA = 3 mm ØB = 1,4 mm ØB = 1,5 mm Ømax. pin = 1,2 mm Ømax. pin = 1,3 mm
C560-014
C560-001 ØA = 1,4 mm ØB = 0,6 mm C560-002 ØA = 1,8 mm ØB = 0,8 mm C560-014 ØA = 2,5 mm ØB = 0,8 mm Ømax. pin = 0,4 mm Ømax. pin = 0,6 mm Ømax. pin = 0,6 mm
1,1 1,9
7,5
C470-047
10 1,5
7
ø 3,5
R31
5x1,8
C470-026
C470-012
14x3
Ø 1,7
C470-025
C470-011
12
C470-008
Cartridges with chrome finish, designed for use in plastic ø9
C360-011
C360-012
C360-013
C360-014
ØA = 1 mm ØB = 0,6 mm
ØA = 1,2 mm ØB = 0,8 mm
ØA = 1,4 mm ØB = 1 mm
ØA = 1,6 mm ØB = 1,2 mm
C560-003
C560-003 ØA = 2,7 mm ØB = 1 mm Ømax. pin = 0,8 mm
Pad Cleaners Tips
C560-011
C560
C560-011HT Standard Life ØA = 1,4 mm ØB = 0,6 mm
Bø $
C560-017 ØA = 2 mm ØB = 1,1 mm Ømax. pin = 1 mm
C560-006
C560-004
C560-009
C560-004 ØA = 3,2 mm ØB = 1,3 mm C560-009 ØA = 5 mm ØB = 1,3 mm Ømax. pin = 1,1 mm Ømax. pin = 1,1 mm
C560-007
C560-005
C560-005 ØA = 3,4 mm ØB = 1,5 mm Ømax. pin = 1,3 mm
C560-015
C560-006 ØA = 4,2 mm ØB = 1,9 mm C560-007 ØA = 4,8 mm ØB = 2,4 mm C560-015 ØA = 5,2 mm ØB = 3 mm Ømax. pin = 1,7 mm Ømax. pin = 2,2 mm Ømax. pin = 2,8 mm C000-000 High Thermal Efficiency Cartridges: These are characterised by their optimised tip geometries which achieve improved thermal efficiencies of up to 40%. C000-000* These cartridges are 20mm longer than normal cartridges for easy access to difficult-to-reach joints
C560-012
C560-012HT Standard Life ØA = 1,8 mm ØB = 0,8 mm C560-013
C560-013 Extended Life ØA = 2,7 mm ØB = 1 mm
7
Modular line
Set up your personalized station according to your soldering or rework needs Stackable modules save work space
Fully compatible tools with all control units
Easy-to-use menu helps work more efficiently
Station customizable
Partial Counters
Peripherals
Tools Preset
Graphs
Personalize the parameters according to your work.
Total and partial time register for each port: work, sleep & hibernation in hours.
Join station ports to pedals and modules: desoldering pump, nitrogen flow regulator,...
The station detects the tool and applies the parameters chosen by the operator.
Optimize soldering quality by analyzing your work graphics in real time.
Communication Station-PC
Robots
B¡Net Your Soldering Network
Update station software, manage your stations via PC or export graphics.
Automate the soldering process and manage the station via Robot.
Organize and control all the production from your PC.
TFT screen See % power for each port USB-A Software Updating & export graphics
Quick temperature change
Tool in use
Consult the comprehensive help for each parameter
Display different ports in use
8
Control Units DI
DDE
DME
1 Tool
2 Tools & Capacitive Keyboard
4 Tools & Touch Screen
MS / MV
MSE / MVE
Desoldering Modules
Desoldering Modules
Stands AD-SD
AP-SD
PA-SD
HT-SD
DS-SD
DR-SD
Tools T210
T245
T470
AP250
PA120
HT420
DS360
DR560
Precision Purpose Handles
General Purpose Handles
Heavy Duty Handles
Solder Feed Iron
Micro Tweezers
Thermal Tweezers
Micro Desoldering Iron
Desoldering Iron
C250
C120
C420
C360
C560
Cartridge range C210
C245
Cleaning systems CL6166
CLMS
CLMB
ESD Tip Cleaner
Automatic Junior Tip Cleaner
Automatic Senior Tip Cleaner
9
Premium line
Ready-to-use with all the necessary equipment for a successful job The answer to your rework needs
Exclusive solutions Heavy Duty & Nano Soldering DIT Soldering station For industrial soldering jobs with medium and high power requirements. Includes the T245-A General Purpose Soldering Iron.
DIR Precision Soldering station For industrial precision soldering jobs with medium power requirements. Includes the T210-A Precision Soldering Iron.
T245-A T210-A
AL Auto-feed Soldering station
Automates the soldering process by feeding solder wire.
For intensive and/or single handed soldering jobs.
You can select the length and the feed rate of the tin wire.
Desoldering
For desoldering small and medium-sized insertion components and for cleaning circuits with SMD components.
DIS Desoldering station with Electric pump Includes the DR560-A Desoldering Iron.
DSS Micro Desoldering station with Electric pump Includes the DS360-A Micro Desoldering Iron.
DIV Desoldering station with Pneumatic pump Includes the DR560-A Desoldering Iron. A compressed air source is necessary at the operator’s bench.
DR560-A
DS360-A
10
Rework
For soldering and desoldering all types of components quickly and safely. Work simultaneously with up to 2 different tools.
DDSE Rework station with Electric pump
DDVE Rework station with Pneumatic pump A compressed air source is necessary at the operator’s bench.
Hot Air
For soldering and desoldering all types of SMD using hot air with extractors or protectors.
Control Airflow & Temperature
JTSE Hot Air station Includes the JT-TA Heater Hose set.
TESE Precision Hot Air station
extractor desk
Build your own profile
Includes the TE-TB Precision Heater Hose set.
JTSE-Q & TESE-Q Hot Air stations without extractor desk
JT-TA TE-TB
The Complete Solution RMSE Complete Rework station with Electric pump
RMVE Complete Rework station with Pneumatic pump
PHS-K IR Preheater Set For preheating multilayer PCBs by applying infrared.
11
High Power 250 watt peak power HDE Heavy Duty station This is the ideal solution for high thermal demand or prolonged soldering applications such as the production of solar panels, multi-layered circuits and components of large dissipation surfaces. This station works with the T470 Heavy Duty Handles and C470 Cartridges.
Nano Technology The finest soldering cartridge in the world; only 0.1 mm NASE Nano Rework station Includes the NT105-A Nano Purpose Soldering Iron and the NP105-B Steady Nano Tweezers.
NT105-A
Total temperature control with our new pedal option.
NANE Nano Soldering station Includes two NT105-A Nano Soldering Irons.
NP105-B
Used worldwide by:
Siemens Apple Rockwell Collins bq
Flextronics Sanmina Huawei Boeing
Continental Visteon Google Intel
FoxConn Motorola Jabil Commscope
ESD safe
0015703/0217
Present in the following sectors: Automotive, Consumer electronics, Medical, Military, Aviation & many more...