Woodward Fab Pipe And Tube Fabrication Tool

WOODWARD FAB PIPE AND TUBE FABRICATION TOOL

INTRODUCTION

Pipe and tube fabrication tools come in various types and functions These tools are essential for metalworking to create precise shapes and angles, allowing fabricators to build everything from simple frames to complex structures. Some of the commonly used pipe and tube fabrication tools include:

Pipe and Tube Notcher: These tools are used to provide clean cuts when notching pipes and tubes to join them to one another. The accuracy and fit provided by notchers ensure a professional look.

Pipe and Tube Bender: These machines are used to bend pipes and tubes professionally. Depending on the expected results and budget, one can choose from manual and automatic pipe and tube benders.

Pipe and Tubing Rolling Machines: Similar to pipe benders, rolling machines provide a wider arc of the bent tube and are used to create architectural radius circles.

Pipe Vises: These are used to hold the pipe or tube in place when they are being fabricated.

Tips and Techniques for Using a Woodward Fab Pipe and Tube Fabrication Tool

Woodward Fab is a well-known manufacturer of pipe and tube fabrication tools, including benders, notchers, and cutters. Here are some tips and techniques for using these tools effectively:

Understand the tool's capabilities: Before using any pipe and tube fabrication tool, it's important to understand its capabilities and limitations. Read the instruction manual carefully and get familiar with the tool's features and settings.

Use the correct size of dies: If you're using a bender, make sure you use the correct size of dies for the material and diameter of the pipe or tube. Using the wrong size of dies can cause the material to kink or distort. Set the correct angle and bend radius: When using a bender, it's important to set the correct angle and bend radius. This will ensure that the finished product is accurate and meets your specifications. Clamp the material securely: When using a notcher or cutter, it's important to clamp the material securely to prevent it from moving during the cutting or notching process. This will help you achieve clean and accurate cuts or notches.

Practice on scrap material first: If you're new to using pipe and tube fabrication tools, it's a good idea to practice on scrap material first to get a feel for the tool and its capabilities. This will help you avoid mistakes when working on your final project.

By following these tips and techniques, you can use Woodward Fab pipe and tube fabrication tools effectively and achieve accurate and precise results.