Particleboard ,medium density fibreboard(MDF) and oriented strand board(OSB) developed in the latter half of the 20 th century from technologies first applied to plywood manufacture,but required new approaches to particle preparation and drying faster setting adhesives and press design. Particles,being smaller than veneer sheets used to manufacture plywood,allow a much wider range of raw material to be used. In fact these panels use raw material that is either a waste stream from other processes or a wood resource that cannot be used for other purposes. Particleboard is non-structural , interior product made from wood particles that are often the by products from the manufacture of the other wood products such ad lumber or paper. The board typically consists of several particle layers-a core and two outside layers, or faces these particles are mixed with resins and formed under heat and pressure into a strong,solid board. Flakeboard and particleboard panels unfinished with the most diverse offering of finishes available on the market :thermally fused melamine, paper overlays and paint. Wood-based panels such as particleboard , MDF and OSB are a significant component in the wood industry. They satisfied performance requirements that are increasingly difficult to meet from solid wood sources and are able to meet these by using residues from other wood processing operations, or in the case of OSB, from small diameter logs from species that otherwise have limited potential., and at competitive prices. The technology to produce these panel has advanced to the point where these panels are made with a uniformity that allows processing on automated sawing, maching and finishing lines: increased automation of panel processing operations results in better quality components at a lower cost. Finishing systems range from paints and lacquers, grain printing,though to application of preprinted of solid color resin impregnated papers to provide wear resistance for working surfaces. To complete the cycle as it were,the composite panels can also be finished with a decorative veneer to provide a natural wood surface.
This is our particleboard, our board! Contact:Jessica Phone:+8613805393426 Whatsapp:13805393426 Shandong Lianyuo Wood CO., Ltd Linyi Senluo Plywood Factory Linyi Forest International Trade CO., Ltd Email:forest@woodsproductos.com Website: www.woodsproductos.com