IN-LINE AIR REGULATOR
RAZOR BLADE SCRAPER
KBS #1 THINNER
Part No. 688.1200 • 1/4” Body Size and FNPT Threads • Supply Pressure: 150-400 psi • Operating Outlet Pressure Range: 40-140 psi • Max Operating Temp: 175°F (80°C) • Max Air Flow; 25 CFM at 125 psi
Part No. 690.102.4 • Stainless Steel Hand Scraper • Positive Brass Retention Slide • Comes With a Package of 5 single edge blades • Overall length 3-3/4” • Made in USA
Part No. Net Weight 891.1805 8 oz. • Slow evaporating solvent used to reduce RustSeal or BlackTop for spray applications
MAGNETIC PICK-UP TOOL
HEAVY-DUTY INTERIOR & UPHOLSTERY BRUSH
Part No. 692.1700
Part No. 690.8730 • Extreme flare is convenient for scrubbing hard-toreach areas • Crimped, cream polypropylene fibers set in a foam block
• Heavy-duty magnetic pick-up tool with a blue molded grip for comfort • Simply wave over ferrous material then retract the pull rod to release • Perfect for picking up metal chips and shavings around machinery and work areas; can also be used for moving fastners in and out of bins; hundreds of other uses and applications
KBS RUSTBLAST
KBS RUSTSEAL – RUST
RUST REMOVER/ PRE-PAINT PRIMER
PREVENTIVE COATING
Part No.
Part No.
Net Weight
891.1801 Quart • Removes & neutralizes rust, pre-paint primer • Provides etched surface profile for solid adhesion • Leaves a zinc phosphate base coating • Oxygen-Block enhanced for short term corrosion protection • Enhances welding conductivity • Water-based, biodegradable, Non-corrosive
MILWAUKEE® MAGNETIC NUT DRIVERS,1/4” SHANK Part No.
Size
OAL
Part No.
Size
891.1802 Gloss Black 891.1803 Satin Black 891.1804 Grey 891.1810 Silver • Combines with atmospheric moisture to cure • Forms permanent non-porous barrier against moisture & oxygen • High abrasion & chemical resistance • Repels fuels, oils, most acids & alkalis, & graffiti • Withstands temps up to 600°F (316°C) • Flexible coating allowing expansion & contraction • Compatible with all paint systems, Moderate UV stability
H280 WEATHERSHIELD™ HYDRAULIC HOSE SAE 100R16
H290 WEATHERSHIELD™ HYDRAULIC HOSE SAE 100R2AT, TYPE S Part No. Per Foot
Hose I.D.
Hose O.D.
Work Min. Burst Min. Bend Eaton No. Press. (PSI) Press. (PSI) Radius
897.290.4.1 897.290.6.1 897.290.8.1 897.290.10.1 897.290.12.1 897.290.16.1 897.290.20.1
1/4 3/8 1/2 5/8 3/4 1 1-1/4
19/32 3/4 7/8 1 1-5/32 1-1/2 1-7/8
6500 5800 5000 4000 3500 3000 2500
• • • • • • •
Net Weight Quart Quart Quart Quart
OAL
749.66.4702 1/4" 1-7/8" 749.66.4736 7/16" 2-9/16" 749.66.4703 5/16" 1-7/8" 749.66.4737 1/2” 2-9/16” 749.66.4705 3/8" 1-7/8" 749.66.4607 7mm 2-9/16” 749.66.4706 7/16" 1-7/8" 749.66.4608 8mm 2-9/16” 749.66.4732 1/4" 2-9/16" 749.66.4610 10mm 2-9/16” 749.66.4733 5/16" 2-9/16" 749.66.4612 12mm 2-9/16” 749.66.4735 3/8" 2-9/16" 749.66.4613 13mm 2-9/16” • Proprietary steel & heat treat process for maximum strength and durability • Strong magnetic tip for secure grip • Color-coded band for easy identification • Chamfered edge for improved clearance
26000 23200 20000 16000 14000 12000 10000
Color
4.00 5.00 7.00 8.00 9.50 12.00 16.50
H29004 H29006 H29008 H29010 H29012 H29016 H29020
Inner Tube: Synthetic rubber Reinforcement: 2 Steel Braids Cover: Weather SHIELD Synthetic rubber cover Temp. Range: Petroleum-based Hydraulic Fluids -40 C to +127 C (-40 F to +260 F) Water-based Hydraulic Fluids: -40 C to +70 C (-40 F to +158 F) Hose Ends: C-O-C ‘Z’ Series Typical Application: Hydraulic system service with petroleum and water-based fluids, for general industrial service • MSHA Accepted
Part No. Hose Hose Work Press. Min. Burst Min. Bend Eaton No. Per Foot I.D. O.D. (PSI) Press. (PSI) Radius 897.280.4.1 1/4 17/32 6500 26000 2.00 H28004 897.280.6.1 3/8 11/16 5300 21200 2.50 H28006 897.280.8.1 1/2 13/16 4500 18000 3.50 H28008 897.280.10.1 5/8 15/16 4000 16000 4.00 H28010 897.280.12.1 3/4 1-3/32 3500 14000 4.75 H28012 897.280.16.1 1 1-13/32 3000 12000 6.00 H28016 897.280.20.1 1-1/4 1-13/20 2500 10000 8.25 H28020 897.280.24.1 1-1/2 2 2000 8000 10.00 H28024 897.280.32.1 2 2-1/2 1600 6400 12.50 H28032 • Inner Tube: Synthetic rubber • Reinforcement: 2 Steel Braids • Cover: WeatherSHIELD Synthetic rubber cover • Temp. Range: Petroleum-based Hydraulic Fluids -40 C to +127 C (-40 F to +260 F) • Water-based Hydraulic Fluids: -40 C to +70 C (-40 F to +158 F) • Hose Ends: C-O-C ‘Z’ Series
H421 WEATHERJACK™ HOSE Hose Hose Work Press. Min. Burst Min. Bend Eaton No. Part No. ID OD (PSI) Press. (PSI) Radius Per Foot 1/4 17/32 10,000 20,000 2.00 H42104 897.421.04.1 • Typical Application: Hydraulic jacking system with petroleum and water-based fluids • Inner Tube: Synthetic Rubber • Reinforcement: 2 Wire Braid • Cover: Neoprene • Temp. Range: -40°C to +100°C (-40 F to +212 F) • Hose Ends: ‘Z’ series
service that works...products that perform
PAGE
7