How To Print a Test Page in HP Ink Tank 310?
•
A test page is printed to confirm whether the hardware of the printer functions properly. Make sure that the printer is turned on and connected to the computer and the network.
•
The network can be either HP Ink Tank 310 wired or wireless 123.hp.com/setup 310. Check whether the network signal is strong and stable. Examine the level ink tanks and has the ink up to the required level.
•
If not, refill the ink using the resealable bottles that are supplied along with the printer. Make sure that the printheads are installed properly by removing the protective tapes.
•
Open the input tray and slide the paper extender to the left side. Load a stack of plain paper into it and check whether you have loaded the paper that is compatible with the printer.
•
Check whether you have downloaded the driver that is compatible with the printer and set the 123.hp.com/ink tank 310 as your default printer. Press and hold the Power button and press the Cancel button immediately.