SeccoEbe | EN

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.44 Pagina 1

SeccoEbe The thermal insulation of excellence for steel.

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.44 Pagina 2

THERMAL BREAK

WOODEN CLADDING

SeccoEbe

SeccoMetalloLegno

AND GLAZING DOORS WITH ONE OR TWO TILT LEAVES · · DOORSLIFT, W&INDOWS SLIDE S ILT & TURN · TRANSOM WINDOWS · ·TOP HUNG (OPEN ASHES · VTERTICAL OUT ) AND HORIZONTAL PIVOT (NEW) · · ·

· ONE LEAF OR DOUBLE LEAF TILT WINDOWS AND GLAZING DOORS ·

FIRE DOORS

SeccoFuoco · DOORS · FIXED LIGHT · GLAZED SCREENS ·

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.44 Pagina 3

A

of

full range

Sections for full freedom of design.

Our Tagliotermico SeccoEbe thermal-break sections allow us to create frames which meet the severe insulation and performance requirements of the most recent standards without compromising design needs.

Thanks to SeccoEbe thermal break sections the Designer is free

~ to select from frames made in the most advanced metals: steel, stainless steel, Cor-Ten, and Bronzofinestra ~ to design frames with interiors made in a metal type and exteriors in a different one ~ to install fire doors which are aesthetically consistent with standard doors ~ to design big-size door and window frames with fine slender high-performance profiles ~ to resort to differing but consistently finished shapes ~ to pick out colours and sort out elegance ~ to use wood for interiors and superior metals for exteriors

All this with the guarantee of highly performing, long-living systems with extremely low maintenance costs.

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.44 Pagina 4

SeccoEbe The thermal insulation of excellence for steel.

Galvanised Steel

Stainless Steel

Cor-Ten Steel

Bronzofinestra

Like a modern Formula 1 racing car, building design and engineering must succeed in obtaining increasingly better performance despite increasingly severer restrictions. One of the greatest restrictions is compliance with the ecological and energy saving norms for buildings, which the modern building trade meets through thermal insulation. Secco Sistemi puts its designers in conditions to comply with these requirements in the window/door frame sector with the SeccoEbe Thermal Break, which allows the insulation values laid down by the new and strict standards to be achieved. In addition to its special technology ensuring perfect insulation, SeccoEbe Thermal Break is the only system that allows frames to be made with superior materials such as galvanised steel, stainless steel, Cor-Ten steel and copper alloy whether alone or combined in the same frame, to ensure greater design and engineering freedom.

A DVA N TAG E S O F T H E S E C C O E B E T H E R M A L B R E A K

· · · · · · · · ·

4

INTEGRATED SYSTEM COMPLETE WITH SECTIONS, FITTINGS AND GLAZING GASKETS/SEALS, FOR DESIGNING AND MAKING EVERY TYPE OF THERMAL-BREAK FRAME SLENDER SECTIONS YET PERFECTLY INSULATED, ABLE TO GUARANTEE MAXIMUM STRUCTURAL PERFORMANCE TO MAKE INCREASINGLY MORE ELEGANT AND BRIGHT FRAMES AND CURTAIN WALLS

CONTINUOUS LEVEL OF INSULATION AROUND THE WHOLE SECTION, WITHOUT INTERRUPTING OR AFFECTING THE SEAL

MAXIMUM DESIGN FREEDOM THANKS TO THE POSSIBILITY OF MAKING COMBINATION FRAMES WITH TWO DIFFERENT MATERIALS: GALVANISED STEEL, STAINLESS STEEL, COR-TEN STEEL, BRONZOFINESTRA , PRE-PAINTED TO REQUIRED COLOUR, ETC. GUARANTEED TESTED PERFORMANCE THAT SATISFIES EVERY DESIGN REQUIREMENT AND IS IN CONFORMITY WITH THE CE MARK ABSOLUTE CERTAINTY OF DURATION AND LOW MAINTENANCE COSTS POSSIBILITY OF MAKING REGULAR ARCHED SHAPES OR TO CUSTOMER TEMPLATE REDUCED ASSEMBLY TIMES AND SIMPLE APPLICATION OF FITTINGS POSSIBILITY OF REINFORCING THE WINDOW/DOOR FRAMES ACCORDING TO END CUSTOMER REQUIREMENTS

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.44 Pagina 5

GUARANTEED PERFORMANCE

S E C C O E B E I N S U L AT I O N T E C H N O LO G Y

The performance of the SeccoEbe Thermal-Break System, tested by the best European Certification Laboratories in accordance with the reference standard EN 14351-1, is more than adequate for being issued the EC certification for window/door frames.

In the SeccoEbe Thermal Break the sections are bonded together using two materials: the first is a fibreglass reinforced extruded polyamide and the second a high-density polyurethane resin injected under high pressure, which firmly unite the two metal parts.

This technology ensures continuous connection and consequent insulation with no gap in seal and guarantees maximum torsional and flexural strength.

· · · · · ·

Air, wind and water - the system for windows with weep and central gasket allows maximum performance values to be achieved up to class E1050 (1050 Pascal of pressure).

Strength and durability - the use of approved fittings and the structural strength of the sections and joints ensure perfect operation for the whole envisaged lifecycle of scheduled use (opening/closing, torsional stress and yield).

Sound insulation - the presence of seals and rebate gaskets plus the possibility of fitting very thick glass allow the design acoustic values to be achieved.

Thermal insulation - the special system for joining the steel shells without any thermal bridges results in heat transmission rates or U-values of up to 1.4 W/m2k.

Bullet resistance - the specific configuration of the internal chambers allows ballistic steel sheets to be inserted, which, depending on their thickness, allows the highest ballistic resistance to be achieved to standard EN 1522.

Burglar resistance - thanks to the structurally sturdier frame, a simple change of hardware allows the system to meet all values of burglar resistance required by ENV 1627.

5

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 6

SeccoEbe The thermal insulation of excellence for steel.

45

FLEXIBILITY AND COMPLETENESS OF THE SYSTEM

SeccoEbe is an integrated system of 65 or 73.5 mm thermal-break sections, fittings and glazing gaskets, with which rectangular, shaped or arched doors and windows may be made with very slender frames overall.

Seals are ensured by a double gasket system for the doors and a triple weatherstrip with weep system for the windows. Each type of window or door comes with the relative approved fittings integrated into the system.

1.5

85

RANGE OF SECTIONS AND FITTINGS

DOORS AND WINDOWS

GL AZING BEADS

6

GL AZING BARS

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 7

1 2 3 4 5 6

Maximum sash/leaf weight 70 kg Maximum sash/leaf width L < 900 mm Maximum sash/leaf height H < 2300 mm Height/width ratio L/H < 2/3

Flush on interior and overlap on exterior Weep channel with triple gasket Wood/PVC hardware groove Integral thermal break in polyamide and polyurethane Sealed unit up to 63 mm Reduced cross section

H O R I Z O N TA L S E C T I O N D O U B L E L E A F W I N D O W

45

43 1

3

3

4

5

4

5

2

1

85

2

1 6

63

6

1

5 2 4 1

5 3

4

3

6 2

1 1

D O O R H O R I Z O N TA L S E C T I O N

1 2 3 4 5

Flush on interior and exterior Double rebate gasket European accessory groove 25 x 21 mm Integral thermal break in polyamide and polyurethane 55 mm sealed unit

VERTICAL SECTION SINGLE LEAF WINDOW

1 2 3 4 5 6

Flush on interior and overlap on exterior Weep channel with triple gasket Wood/PVC hardware groove Integral thermal break in polyamide and polyurethane Sealed unit up to 63 mm Reduced cross section Maximum sash/leaf weight 130 kg Maximum sash/leaf width L < 1465 mm Maximum sash/leaf height H < 2400 mm Height/width ratio L/H < 2/3

7

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 8

SeccoEbe The thermal insulation of excellence for steel.

Example of window with overlap coupling and visible hinge

SeccoEbe

SeccoEbe

in

in

Galvanised Steel

S P E C I F I C AT I O N S

S P E C I F I C AT I O N S

·

·

· · 8

Example of door with flush frame and butt hinge

Material - Sections: obtained from steel strip hot-dip galvanised with the Sendzimir system followed by a skin pass Thermal break: extruded spacer in fibreglass reinforced polyamide fixed with high-density rigid polyurethane

·· ··

Thickness - 15/10 Physical characteristics - FeP02 GZ 200 (200g/m2 zinc coating on both surfaces) Reference standards - UNI EN 10142/3/7; EURONORM 143 Surface treatment - top coat with oven-baked polyester powder coatings after preparation of the substrate by cleaning and application of primer, available in all RAL colours or to designer request

Material - Sections: obtained from cold-rolled stainless steel strip industrially pre-treated to ensure maximum quality and uniformity.

Thermal break: extruded spacer in fibreglass reinforced polyamide fixed with high-density rigid polyurethane

·· ·· · · ·

Thickness - 15/10 Physical characteristics - AISI 304 (X5 CrNi 18-10) - AISI 316L Marine (X2 CrNiMo 17-12-2) Reference standards - EN 10088-2; EU 114 Surface treatment Satin finish - obtained on AISI 304 strip with surface finish 2B and subsequent satin polish with 220-grain abrasives.

Polished finish - obtained on AISI 316L (marine) strip with surface finish 2R reflectivity 53% and subsequent mirror polishing.

Scotch-Brite finish - obtained on AISI 316L (marine) strip with surface finish 2B and subsequent scotch-brite brushing.

Construction - the frames are made by seam welding of the contact surfaces followed by grinding and making good the zinc coating.

Fittings - all the fittings for the system are sized for the declared capacity loads and made in suitable materials for use with galvanised steel sections.

Stainless Steel

· ·

Construction - the frames are made by seam welding of the contact surfaces followed by grinding and making good the surface finish or, alternatively, by a mixed system of mechanical assembly and welding on concealed surfaces.

Fittings - all the fittings for the system are sized for the declared capacity loads: the locking systems and installation screws in particular are made in stainless steel.

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 9

TYPES OF OPENING

Example of window with overlap coupling and concealed hinge

Example of door with flush frame and screw hinge

SeccoEbe

SeccoEbe

in

in

Cor-Ten Steel

S P E C I F I C AT I O N S

S P E C I F I C AT I O N S

·

·

Material - Sections: obtained from self-passivating high-tensile steel strip (once sold under the name Cor-Ten), which upon exposure to air forms a uniform and stable layer of oxide that covers the sheet metal and stops atmospheric corrosion.

Thermal break: extruded spacer in fibreglass reinforced polyamide fixed with high-density rigid polyurethane

·· ··

· ·

Thickness - 15/10 Physical characteristics - Fe 510 X (C max% 0.12: Si% 0.25-0.75: Mn% 0.20-0.50: P% 0.07-0.15: Cu% 0.25-0.55: Cr% 0.30-1.25: Ni max% 0.65) Reference standards - EN 10149 Surface treatment - after forming, the material is dipped in special oxidising baths to accelerate formation of the protective layer. Upon reaching the required surface colour, the surfaces are passivated followed by waxing to stabilise the material.

Construction - the frames are made from the rough rolled product by seam welding of the contact surfaces followed by the oxidising cycle, or, alternatively, starting with bars that are already oxidised, by a mixed system of mechanical assembly and welding on concealed surfaces.

Fittings - all the fittings for the system are sized for the declared capacity loads: the locking systems and installation screws in particular are made in stainless steel.

Bronzofinestra

Material - Sections: obtained from rough cold-rolled copper alloy OT67 strip.

Thermal break: extruded spacer in fibreglass reinforced polyamide fixed with high-density rigid polyurethane

·· ·· · ·

Thickness - 15/10 Physical characteristics - Cu Zn 33 CW 506L (OT 67, 67% copper and 33% zinc) Reference standards - EN 1652:1999 Surface treatment Burnished finish - after forming, the product undergoes stress relieving followed by mechanical cleaning with abrasive and then burnishing by dipping in burnishing liquid; the section is then washed and dried and lastly protected by application of Vaseline oil.

Polished finish - after forming, the product undergoes stress relieving followed by mirror polishing.

· ·

Construction - the frames are made from the rough or burnished product by a mixed system of mechanical assembly and brazing on concealed internal surfaces.

Fittings - all the fittings for the system are sized for the declared capacity loads: the locking systems and installation screws in particular are made in stainless steel.

9

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 10

SeccoEbe in

10

Galvanised Steel

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 11

ADVANTAGES OF SISTEMA SECCOEBE IN GALVANISED STEEL

Better insulation for more slender frames The SeccoEbe System in galvanised steel ensures best thermal insulation for slim yet structurally strong and totally distortion-free frames, the design of which would be impossible if it were not for steel.

Wide choice of finishes for old and new frames The possibility of finishing the frame surfaces with a wide choice of finishes and colours makes the SeccoEbe System in Galvanised Steel the most popular choice either for replacing old steel frames in restoration work or for adding a touch of colour in modern surroundings.

Easy assembly The precise size of the sections ensuring perfect assembly of the frames by welding plus the simple way in which the system fittings are inserted into the special accessory groove make the fitter’s work easier.

FINISH: G A LVA N I S E D S T E E L Semi-finished or galvanised products, after further passivation, may be used in the natural state in environments that are not particularly aggressive.

FINISH: PA I N T E D G A LVA N I S E D S T E E L After the transformation process the semi-finished or finished product is given a finish in any of the RAL colours or special colours, through application of the pre-treatment-cataphoresis-polyester powders cycle.

11

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 12

SeccoEbe in

12

Stainless Steel

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 13

ADVANTAGES OF SISTEMA SECCOEBE IN STAINLESS STEEL

Better insulation and protection against external agents The SeccoEbe System in stainless steel combines the high structural sturdiness and weathering resistance of stainless steel with the heat and sound insulating properties of the SeccoEbe thermal break.

Three different finishes for more design freedom

FINISH: P O L I S H E D S TA I N L E S S S T E E L

The SeccoEbe System in stainless steel hides its strength behind 3 different finishes: classic, well-defined and mirror-like Polished, Scotch-Brite obtained by light brushing that dims the surface shine and Satin obtained with stronger brushing resulting in a slightly rougher and darker feel. Three extra tools for extra design ideas.

Easy assembly The precise size of the sections ensures perfect frame composition by welding as well as faster construction by mechanical assembly.

The “prefinished” sections (in Scotch-Brite, satin or polished finish protected by tear-off film) plus the simple way in which the system fittings are inserted into the special accessory groove also make the fitter’s work easier.

FINISH: SATIN-FINISH STAINLESS STEEL

Finish obtained on AISI 316L (marine) strip with surface finish 2R reflectivity 53% and suitable for a subsequent mirror polishing.

Finish obtained on AISI 304 strip with surface finish 2B and subsequent satin polish with 220-grain abrasives.

FINISH: S C O TC H - B R I T E S TA I N L E S S S T E E L Finish obtained on AISI 316L (marine) strip with surface finish 2B and subsequent scotch-brite brushing.

13

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 14

SeccoEbe in

14

Cor-Ten Steel

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.45 Pagina 15

ADVANTAGES OF SISTEMA SECCOEBE IN COR-TEN STEEL

Better insulation and exclusive aesthetic values Frames in SeccoEbe System in Cor-Ten steel offer today’s designers an extra tool for innovation thanks to the use of Cor-Ten, a material that ensures outstanding aesthetic results, combined with the heat and sound insulation of the SeccoEbe thermal break.

Structural sturdiness and corrosion resistance Apart from the uniqueness of its aesthetic features and higher structural strength, Cor-Ten also ensures 10 times more corrosion resistance than normal steels even in critical situations.

Easy assembly The precise size of the sections ensures perfect frame composition by welding as well as faster construction by mechanical assembly. The “prefinished” sections with oxidised finish plus the simple way in which the system fittings are inserted into the special accessory groove also make the fitter’s work easier.

FINISH The sections in Cor-Ten steel may be supplied in their natural state or pre-oxidised with a protective patina, which shortens the time period when chalking could occur at the end of stabilisation.

15

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 16

SeccoEbe in

16

Bronzofinestra

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 17

ADVANTAGES OF SISTEMA SECCOEBE IN BRONZOFINESTRA

Better insulation and more structural strength The SeccoEbe System in Bronzofinestra not only gives a typically warm and glowing colour of old bronze but also better heat insulation to slim yet structurally strong frames whether used to defer to the historic and formal values of a work or for innovative solutions.

The colours of old bronze and corrosion resistance The system is available in two different finishes, polished and burnished, which both ensure excellent performance when used even in hostile environments such as by the sea, given the high corrosion resistance.

Fittings and easy assembly The system fittings have been specially designed to avoid formation of a galvanic cell.

The Bronzofinestra sections may be machined with the same equipment used for aluminium. The precise size of the sections ensures faster frame construction by mechanical assembly. The “prefinished” sections with burnished or polished finish plus the simple way in which the system fittings are inserted into the special accessory groove also make the fitter’s work easier

FINISH: BURNISHED BRONZOFINESTRA After the transformation process, the sections or finished materials undergo mechanical cleaning with abrasive and then burnishing by dipping in order to acquire the warm shade of old bronze.

FINISH: POLISHED BRONZOFINESTRA After the transformation process, the sections or finished materials undergo mirror polishing, which gives the alloy its golden splendour.

17

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 18

SeccoEbe BiMetal 18

Galvanised Steel

Stainless Steel Satin

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 19

ADVANTAGES OF SISTEMA SECCOEBE BIMETAL

Whenever design requires exterior consistency but allows freedom of choice of interior materials, whenever the designer’s taste is focused on materials which match with the furniture but differ for façades, Secco Sistemi recommends SeccoEbe thermal break Bimetal sections.

Cor-Ten plus stainless steel, Bronzofinestra plus stainless steel, steel plus Cor-Ten: all combinations are available.

Stainless Steel Scotch-Brite

Stainless Steel Polished

Cor-Ten Steel

Bronzofinestra Burnished

Bronzofinestra Polished

19

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 20

SeccoMetalloLegno Wood warmth is left intact.

Galvanised Steel

Stainless Steel

Cor-Ten Steel

Bronzofinestra

It is no longer necessary to choose between the elegance of wood and the strength of metals such as standard, stainless, and Cor-Ten steel or bronze. Neither is it necessary to renounce comfort provided by thermal insulation.

Full satisfaction is at hand today because the SeccoMetalloLegno System gives you everything: the warm, traditional style of wood, the energy saving and comfort of thermal insulation plus the continuing reliability of noble metals.

T H E AV DA N TAG E S O F S E C C O M E TA L LO L E G N O

· · · · · · · ·

20

INTEGRATED SYSTEM OF SECTIONS, FITTINGS, GASKETS/SEALS FOR MAKING STEEL/METAL THERMAL-BREAK WINDOWS AND DOORS. UTMOST DESIGN FREEDOM THANKS TO THE OPTION OF MAKING METAL/WOOD FRAMES OF ALL TYPES: STANDARD, STAINLESS AND COR-TEN STEEL OR BRONZE COMBINED WITH VARIOUS TYPES OF FINE WOODS. THE FRAME CAN BE MADE BURGLAR-RESISTANT BY MOUNTING SPECIAL HARDWARE ON THE STEEL SECTION. SLENDER SECTIONS CAPABLE OF GUARANTEEING MAXIMUM STRUCTURAL PERFORMANCE FOR ATTRACTIVE AND BRIGHT WINDOWS AND DOORS. THE WOOD CLADDING MAY BE REPLACED WITHOUT REMOVING THE WHOLE FRAME. VERY HIGH LEVELS OF PERFORMANCE AND HEAT AND SOUND INSULATION THANKS TO THE SPECIAL SECCOEBE TECHNOLOGY. INTERIOR CLADDING CUSTOMIZABLE WITH VARIOUS TYPES OF WOOD, STYLES AND FINISHES TO BLEND IN WITH THE INTERIOR DECORATION. ABSOLUTE CERTAINTY OF LONG LIFE AND LOW MAINTENANCE COSTS BECAUSE OF THE METAL EXTERIOR FINISH WHICH ENSURES ALL-WEATHER RESISTANCE.

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 21

Elegant Inside,

GUARANTEED PERFORMANCES

· · · · ·

Air, water, wind - the special weep-channel window system with central gasket allows to reach the highest performance levels up to Class E1050 (pressure: 1,050 Pascal).

Mechanical resistance and durability - the use of certified accessories and the structural resistance of sections and joints guarantee excellent functionality during the expected life of the frames for any expected usage (opening, torsion efforts, and buckling).

Sound insulation - sealing and striker gaskets and the option of mounting extra-thick glazing allow to obtain soundproof values as required by specific projects.

Thermal insulation - the special system for joining steel shelves, completely exempt from thermal bridges, results in heat transmission rates of up to 1.4 W/m²k.

Burglar-resistance - thanks to a sturdier frame structure, the system may reach all possible resistance values as provided by ENV 1627 regulation by simply changing hardware.

Everlasting Outside.

S E C C O M E TA L LO L E G N O T E C H N O LO G Y

The steel part fully “exploits” SeccoEbe technology, thereby guaranteeing high structural values, perfect heat insulation and excellent performance in general.

Wooden frames are made in solid wood with 90° butt joints to ensure the look of genuine wooden frames. Frames are joined by means of a special system ensuring that the materials are not contiguous so that individual frames may be replaced without removing the whole window or door frame.

21

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 22

SeccoMetalloLegno Wood warmth is left intact.

THE POWER OF STEEL

1.5

Strong, everlasting and unchanging, Steel is the natural choice for designers looking to the future. Capable of creating architectural shapes with endless, 100% safe opportunities of playing with space and light.

T H E R M A L I N S U L AT I O N

Modern architecture imposes clear standards on energy saving and personal comfort for all kinds of environments. SeccoEbe’s clever technology is a state-of-the-art, comprehensive answer to such requirements.

THE ELEGANCE OF WOOD

Natural, warm, with its soft to deep colour tones, wood is a vital element in designing any kind of environment. It is a matter of style and lifestyle for frames to be incorporated in traditional environments or wherever the choice of materials is inspired by nature.

A FULL RANGE OF SECTIONS AND FITTINGS

WINDOWS

M E TA L- F R A M E W I N D O W S

Galvanised Steel

22

Stainless Steel Satin

Stainless Steel Scotch-Brite

Stainless Steel Polished

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 23

1 2 3 4 5 6 7

Flush exterior and overlapping interior Weep channel with triple gasket Burglar-resistant hardware groove on steel section Full thermal break in polyamide and polyurethane Point-shaped plastic connecting system Finishing and shim gasket Solid wood core frames

WINDOW VERTICAL SECTION

WOODEN FINISHING AND CL ADDING

N AT U R A L O A K

BLEACHED OAK

W E N G E - PA I N T E D O A K

5

4 1

OTHER WOOD TYPES ON DEMAND 3 7 2 6

1

Cor-Ten Steel

Bronzofinestra Burnished

Bronzofinestra Polished

23

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 24

SeccoFuoco EI30 A barrier to fire, not to elegance.

Galvanised Steel

Cor-Ten Steel

Stainless Steel

In-depth study of fire simulations with ensuing use of different class windows and doors allows designers to conceive lighter and more attractive architectural solutions, while complying with safety standards. SeccoFuoco EI30 is fully recommended when the fire-engineering project requires a good seal and insulation: also the fire doors can be consistent with all the other windows and doors in the building, aesthetically in harmony with the spaces and made with materials that the designer considers innovative and attractive.

WITH SECCOFUOCO SECTIONS, THE DESIGNER CAN

· · · · · ·

CHOOSE WINDOWS AND DOORS IN SUPERIOR METALS SUCH AS STEEL, STAINLESS STEEL, COR-TEN STEEL AND BRONZOFINESTRA; ENVISION WINDOWS AND DOORS THAT ARE MADE ON THE INSIDE WITH ONE TYPE OF METAL AND ON THE OUTSIDE WITH ANOTHER; INSTALL FIRE DOORS THAT ARE AESTHETICALLY IN HARMONY WITH THE OTHERS; DESIGN VERY LARGE FRAMES MADE WITH SLENDER , ATTRACTIVE YET HIGH-PERFORMANCE SECTIONS; CONCEIVE DIFFERENT SHAPES YET MADE IN THE SAME WAY; SPECIFY COLOURS AND IMAGINE ELEGANCE.

N E W S Y M B O L S F O R F I R E - R E S I S TA N C E C L A S S I F I C AT I O N E I n

24

Sealing Insulation Time

Door or window capable of not letting in hot fumes or flames Door or window capable of retaining temperature on the opposite side of fire Minutes the property remains unchanged

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 25

1 2 3 4 5

Flush on interior and exterior Double fire striker seal Expandable gasket Inert cooling material Fireproof thermal-break resins

D O O R H O R I Z O N TA L S E C T I O N E I 3 0

1 4 2 3 5 3

1

E + I - Sealing + Insulation

A FULL RANGE OF SECTIONS AND FITTINGS

FIRE DOORS

Fire-resistance classification images are drawn from “Finestra” magazine.

25

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 26

M aterials f o r a b e t Steel

Steel is the name given to an iron alloy containing carbon.

Stainless Steel

Stainless steel is an iron alloy containing chromium,

Its properties and uses are countless; without steel in large

nickel and molybdenum, which was discovered in 1913 by

quantities and at low costs the Industrial Revolution would

the Englishman Harry Brearly and has the property of not

have been impossible. Simple and tough, perfect for

rusting when exposed to the atmosphere. By varying the

everyday life, steel enjoys a great tradition and has always

quantity of the alloying elements over 100 different types

played an irreplaceable role in the building sector.

of stainless steel can be manufactured, each one offering

Most of all its far greater resistance to external stress

different mechanical properties and corrosion resistance

than any of the other materials has allowed

whereby all the production requirements of our industrial

architects and designers to create buildings with

society can be satisfied. In addition to the structural

more glass and therefore light, thanks to the slimmer

properties it offers, stainless steel can also be given various

yet sturdier window and door frames.

types of polished or matt surface finishes to create the most suitable aesthetic effect for every type of environment; these properties have put stainless steel in the limelight of modern architecture.

26

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 27

F inishes t e r d e s i g n

and

Cor-Ten Steel

Cor-Ten steel is a high-tensile, self-passivating special

Bronzofinestra

The name Bronzofinestra stands for an alloy containing

alloy containing copper, chromium and phosphorus,

67% copper and 33% zinc, the main characteristic of

which, as the name indicates, possesses considerable

which is its natural oxidation upon exposure to air.

resistance to corrosion (Cor) and to tensile stress (Ten).

That is how the alloy acquires the typical finish of old

A singular feature of Cor-Ten is its natural oxidation upon

bronze, with a warm and elegant hue that is not the result

exposure to air, which instead of continuing to corrode

of artificial colouring but of a natural chemical process

the material, stops and forms an unchanging protective

of self-protection. Alloys of this type are the earliest

patina. These properties mean it can be used even in

material used by man to forge particularly superior

particularly corrosive or critical situations as testified

weapons and tools, in the Renaissance period they were

to by its common use in architecture for monumental

used to make the window and door frames of palaces and

buildings and outdoor sculptures as well as for

cathedrals and today in modern prestige buildings.

industrial applications such as bridge trestlework, guardrails and containers.

27

www.whiteplease.com

Depl SeccoEbe 2009 v2:Layout_1 05/03/2009 17.46 Pagina 28

SeccoEbe The thermal insulation of excellence for steel.

The leading Italian manufacturer of Door and Window Frame Systems in Steel and Superior Metals

Secco Sistemi S.p.A.

· Via Terraglio, 195 - 31022 Preganziol (TV) Italy · Phone: ++39.0422.497700 · Fax: ++39.0422.497705 Web Site: www.seccosistemi.it · E-mail: info@seccosistemi.it