Page 1

LOOKBOOK

019





ADVENTURES IN EVERYDAY SKIING Whitedot are entering a new phase of ski design. Over the next

Additionally for 2019, the Ragnarok 118 will gain a ‘big brother’ ski

two years we will introduce two new series of skis continuing our

with a new, innovative asymmetric design. This ski will showcase the

innovation, design and performance that is at the core of the Whitedot

cutting edge performance for big-mountain riding. The new Ragnarok

brand.

ASYM will initially be available in our classic, Traditional construction.

The first series to be launched for the 2019 season will be the Altum

The R.Series (R 98/R 108) and Preacher will continue unchanged for

Series, offering two skis in 94mm and 114mm underfoot. These

2019. These designs are proven and extremely popular across a range

skis will be produced in Traditional construction only and have been

of skiers.

designed as a playful, piste/frontside freeride ski.

INTRODUCTION TO 2019





TRUE TO OUR CORE Moving forward into the second decade of

Whitedot was created with the intent

Whitedot exceeds expectations by

Whitedot’s evolution, we continue to see

that we would not make a wide variety

maintaining our company ethos and pushing

success in the international marketplace by

of skis, instead focusing our products on

the Purity of Purpose, Clarity of Design,

leading the industry in material development

specific roles within the mountain’s freeride

Reliable Performance and Innovative

and innovative product design.

environments. Our skis will take you from

Technology that we have at our very core.

those early season days on the piste, through Austrian pro-skier Eva Walkner, has achieved

mid-season powder and backcountry

Ski safely and ski responsibly. Make the

multiple first class world podium places on

exploration, on to the season’s close high

most of, and appreciate, the awe-inspiring

her Whitedot skis and in both 2015 and 2016

on the glaciers as you escape to the farthest

mountain terrain. Take your Whitedot skis

won 1st Place in the Freeride World Tour,

reaches that hold onto that last snow.

and find your freedom.

proving our skis on the world stage.

OUR ETHOS



EXPL AINED

SE R I


ALTUM SERIES

R SERIES

Drawing on our years of ski building experience, the Altum

If you look at the next peak and wonder what it holds then

Series is a playful, versatile all-mountain ski collection. Twin

our all-access, free-touring and versatile R.Series is for you.

tipped, rockered and built for fun, the Altum Series utilises

Encompassing a range of design styles and ethos aimed at the

Whitedot’s unique design philosophy and rocker profiles to form

ambitious freerider, the R.Series is built to be light on the way up

a range of skis for creative riding.

yet capable and uncompromising all over the mountain.

ALTUM 94

167cm, 176cm, 185cm

R 98

167cm, 176cm, 185cm

DIRECTOR 107

171cm, 181cm, 191cm

R 98 CARBONLITE

167cm, 176cm, 185cm

R 108 CARBONLITE

177cm, 186cm

DIRECTOR 107 CARBONLITE 181cm, 191cm ALTUM 114

179cm, 187cm

SKI OVERVIEW


RAGNAROK SERIES

THE PREACHER

The Ragnarok has a certain reputation within the Whitedot

An adaptable go-to ski, built for all-mountain usability.

brand and with the addition of an all-new, Asymmetric

Don’t be fooled by the ‘old school’ profile, the 112mm under foot

counterpart the playful, big-mountain charger’s legacy

and radical shape of the Preacher will take you wherever you

continues.

want to go with fluidity, balance and ease.

RAGNAROK 118

190cm

PREACHER

179cm, 189cm

RAGNAROK 118 CARBONLITE

190cm

PREACHER CARBONLITE

179cm, 189cm

RAGNAROK ASYM

190cm

SKI OVERVIEW



TECHNOLOGY Our Innovation Drives Your Performance + Materials + Cambers + Construction + Weight Chart


MATERIALS Attention to Detail

With the Whitedot brand focused so heavily on the purity of purpose

reduce edge chipping and topsheet delamination. The skis are also put

and the clarity of design of our products, our skis not only have to

through a Montana to structure the base for incredible glide.

perform perfectly every time, they also have to look good whilst doing so. The last process in the manufacture of a Whitedot ski is the

To ensure maximum performance and customer satisfaction we ship

lacquering and polishing.

each ski with a factory applied protection wax before it goes through a rigorous QC inspection.

Each pair is lacquered and highly polished to a mirror shine, we then hand finish each sidewall edge to a rounded transition to protect and

TECHNICAL SPECIFICATIONS


CORE MATERIALS We use tried and tested Poplar and Ash woods. The two woods are laminated first and then the pair of cores are CNC’d together from the same blank core. Our approach with this process is quite unique, we are proud of the results because it makes each ski a matched pair which ensures the skis perform and flex in the same way. Poplar remains an industry standard due to its durability and elasticity while Ash, as a hard wood, strategically placed under the bindings (for retention) gives unparalleled pop and strength. The wooden cores in all of our skis are produced from materials sourced from sustainable forests.

CARBON ARAMID A mixture of Carbon and Kevlar is found in every Whitedot ski; we use Carbon/Kevlar stringers that are constructed from this material or as with the new Carbonlite series you will find 618gm/SqM sheets within the construction of that range. We use and integrate the Carbon Aramid for it’s consistent strength, weight saving abilities, pop and excellent bonding properties when used in conjunction with Carbon-fibre.

CARBON FIBRE A well known material and used worldwide in an array of technical and detailed products however we use Carbon-fibre because it gives our skis extremely light weight properties, added strength and pop whilst keeping the volumes of materials in the construction to a minimum. We apply 618gm/SqM layers in each model in our Carbonlite series.

FLAX Otherwise known as linen. Although Flax is an age old material, its use amongst sports equipment manufacturers is only relatively recent. Whitedot is pushing forward with its use and integration of Flax within our skis, we are at the forefront in developments with this exciting material. We have optimised it within the Carbonlite series; layers of Flax produce a lighter, stronger and denser material than tri-axle fibre-glass yet offer unparalleled dampening properties.

FIBRE GLASS We continue to use this fibre-glass in our skis, every Whitedot ski uses tri-axle fibre-glass for its known power transition and torsional rigidity along with a biaxle fibre-glass for strength. To aid the reduction of vibration and chatter from the tip and tail of our models, we apply an additional platform of bi-axle fibreglass at both the tip and tail. Additionally, we add a dry weave binding retention plate that is designed with fibres that when drilled enclose the binding screws for further retention, when this is paired with the screw adhesive it forms an incredibly strong bond.

MATERIALS


BASE MATERIAL Each Whitedot ski is finished with an ISO 7200 high speed 1.2mm base. We use this standard of ISO 7200 material because it allows for a reliable, smooth and efficient glide whilst at the same time the wax absorption properties are extremely high so it retains the wax for longer. In order to make our skis stand-out from the crowd and get noticed we die-cut each base with a precision laser to ensure they have a perfect bond and seal against each section.

360° EDGES The edges on Whitedot skis are all put through a custom built machine that is programmed with the profile of the ski. This feeds the steel edge material through and perfectly forms the metal to the shape of each ski. This creates a seamless finish to the edge of our skis and with only one join point at the tail of the ski reduces the chance of edge pulls and blow-outs.

LACQUERING The incredible finish that you see on every ski is produce by two layers of flowing lacquer. This not only makes every ski look stunning though also adds strength to the high performance ISO screen printed topsheet foil.

MATERIALS


Edge Grinding When finishing the skis after removing them from the press, the edges have to be ground down to remove any excess resin or materials to create a smooth, sharp finish to the 360° edges.




A C

B M E Innovation Drives Performance + Positive camber + Tip rocker + Tip and tail rocker

TECHNICAL SPECIFICATIONS

RS


POSITIVE CAMBER Positive camber is how most people think a ski should look; when a pair of skis are placed together, the tips and tails touch near either end of the ski, with an air gap in the middle. This has the advantage of pressing the tip and tail of the ski into the snow, giving the ski maximum stability from the very start of the turn through to the finish. With the in-built ‘spring’ of the camber bringing a level of liveliness to the ride on firm snow. + PREACHER

TIP ROCKER In soft conditions adding a degree of rise to the tip smooths the entry of the ski through the snow, allowing the ski to plane quicker and earlier than a conventional cambered ski. When turning in both soft and hard conditions the added lift in the tip means the first part of the ski is de-cambered and ‘pre-bent’ into a carving profile, resulting in less effort to initiate a turn, in all conditions. + R SERIES

TIP + TAIL ROCKER Where the tip affects the first stage of a turn the tail affects the latter stage, reducing the pressure of the ski pushing into the snow. In softer conditions where the tail is partially sunk this will reduce drag, making it easier to break the tail free. Our signature full length sidecut combined with tail rocker frees up the tail without sacrificing grip, giving you a high level of maneuverability. + ALTUM SERIES + RAGNAROK SERIES

CAMBERS


HANDBUILT Constructions TRADITIONAL

CARBONLITE

We make our skis with a sandwich construction, this is because it is

We are now on the third iteration of our Carbonlite construction as we

the most robust, precise and torsionally strong construction method

constantly develop and improve our materials, prototyping, testing and

currently known.

rolling out new Flax angles and weave.

Our Traditional range is built with a mixture of bi-axial and tri-axial

We blend Flax and Carbon fibre to replace the fibre-glass layers used in

fibre-glass, carbon/kevlar stringers and like all of our skis, a vertically

our Traditional construction resulting in the Carbonlite series being 25%

laminated Poplar-Ash core to ensure a consistent flex throughout the

lighter by comparison.

length of the ski. Carbonlite is less susceptible to degradation. The structure of the fibres The Traditional construction offers mass and momentum through the

within the weave of the Flax and Carbon will not break with flexing and

snow that a lightweight ski cannot match, it produces a ski that is more

so remain structurally sound.

stable particularly in difficult conditions. The Traditional construction suits skiers exploring terrain closer to home on the frontside of the

The skier benefits from being more agile, more reactive and able to ski

mountain.

longer as the skis are lighter on the legs.

CONSTRUCTION


@clara__johanna Skiing the R 98 Carbonlite (176cm). Backcountry, Georgia, GE.


SPECIFICATIONS TECHNICAL SPECIFICATIONS


CONSTRUCTION

SIZE

RADIUS

WAIST

EFFECTIVE EDGE

CAMBER

PROFILE

FLEX

WEIGHT

PREACHER Traditional

179cm

16.5m

112mm

1580mm

6mm

Cambered

8/10

2180g

Traditional

189cm

19m

112mm

1660mm

6mm

Cambered

8/10

2305g

Carbonlite

179cm

16.5m

112mm

1580mm

6mm

Cambered

7/10

1755g

Carbonlite

189cm

19m

112mm

1660mm

6mm

Cambered

7/10

1905g

ALTUM 94 | ALTUM SERIES Traditional

167cm

17m

94mm

1470mm

4mm

Rockered

6/10

TBC

Traditional

176cm

18.5m

94mm

1380mm

4mm

Rockered

6/10

TBC

Traditional

185cm

20m

94mm

1310mm

4mm

Rockered

6/10

TBC

DIRECTOR 107 | ALTUM SERIES Traditional

171cm

21.5m

107mm

1410mm

1mm

Rockered

7/10

1845g

Traditional

181cm

22m

107mm

1460mm

1mm

Rockered

7/10

1895g

Traditional

191cm

25m

107mm

1580mm

1mm

Rockered

7/10

2125g

Carbonlite

181cm

22m

107mm

1460mm

1mm

Rockered

6/10

1640g

Carbonlite

191cm

25m

107mm

1580mm

1mm

Rockered

6/10

1705g

ALTUM 114 | ALTUM SERIES Traditional

179cm

22m

114mm

1411mm

2mm

Rockered

7/10

TBC

Traditional

187cm

24m

114mm

1491mm

2mm

Rockered

7/10

TBC

R 98 | R SERIES Traditional

167cm

22m

98mm

1240mm

2mm

Rockered

8/10

1600g

Traditional

176cm

25m

98mm

1320mm

2mm

Rockered

8/10

1700g

Traditional

185cm

27m

98mm

1400mm

2mm

Rockered

8/10

1990g

Carbonlite

176cm

25m

98mm

1320mm

2mm

Rockered

8/10

1520g

Carbonlite

185cm

27m

98mm

1400mm

2mm

Rockered

8/10

1610g

R 108 | R SERIES Carbonlite

177cm

24.5m

108mm

1400mm

2mm

Rockered

8/10

1595g

Carbonlite

186cm

28m

108mm

1445mm

2mm

Rockered

8/10

1740g

RAGNAROK 118 | RAGNAROK SERIES Traditional

190cm

30m

118mm

1530mm

1mm

Rockered

9/10

2285g

Carbonlite

190cm

30m

118mm

1530mm

1mm

Rockered

8/10

1905g

8/10

TBC

RAGNAROK ASYM | RAGNAROK SERIES Traditionals

190cm

30m

122mm

1580mm

1mm

Rockered







UNIQUE TO WHITEDOT All of our skis are manufactured in pairs and that is how they remain.

All of the wooden core off-cuts are recycled and burnt in the furnace to heat the factory.

All of the cores in Whitedot skis are milled together and then pressed together to ensure that each pair retains the same characteristics.

The composite off-cuts are ground to be recycled into cement, again minimising our wastage.

We design our topsheet graphics so that they not only look great but also highlight the ski shape and profile, making it clear to the end user

360Ëš pre-bent and shaped steel edges to reduce edge pulls and pops.

what each model is for, and capable of. Individually milled aluminium tails in the R.Series for alpine The die-cut bases are swapped between skis so that we minimise

mountaineering use.

wastage.

TECHNICAL SPECIFICATIONS




SKIS | ALTUM 94


Altum 94 ALTUM SERIES

The entire mountain is your playground. The Altum 94 utilises a versatile 94mm waist, an all-encompassing and progressive tip and tail rocker profile and 4mm of camber underfoot. This ski focused on grip and pop over the mountain without compromising on shallow snow ability. Coupled with a progressive, forward mount point all you need to do is point and direct these skis at those natural features you’ve been eyeing up on the lift. Focusing on resort friendly characteristics coupled with all-mountain ability, the new Altum Series is designed to be your playful daily driver in areas where the snowfall is less fortunate.

Technical Details Construction

TIP

Dimensions

125 - 94 - 117 (185cm)

Sizes

Weight

167cm, 176cm, 185cm

TBC

Waist

Colour

94cm

Orange and Purple

Radius

Recommended Mounting Position

17cm, 18.5cm, 20m

815mm, 860mm, 905mm (from tail to boot centre)

Effective Edge

Drill Bit

1470mm, 1380mm, 1310mm

3.6mm x 9mm

Camber Height

Flex

4mm

6/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź598.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with fibre-glass


SKIS | DIRECTOR 107


Director 107 ALTUM SERIES

Versatility defined. The Director 107 brings a rocker profile, flex pattern and shape to fulfil the requirement for a playful ski. The Director 107 works equally well in the backcountry as it does across the wide spectrum of conditions on the frontside of the mountain. An increased effective edge adds to the hard snow performance, whilst the latest rocker profile from Whitedot helps the ski float and turn in the toughest of conditions.

Technical Details

TIP

Dimensions

Traditional : Poplar/Ash core with fibre-glass

134 - 107 - 124 (181cm)

Sizes

Weight

171cm, 181cm, 191cm

1845g, 1895g, 2125g

Waist

Colour

107cm

Purple and Golden Yellow

Radius

Recommended Mounting Position

21.5m, 22m, 25m

815mm, 860mm, 905mm (from tail to boot centre)

Effective Edge

Drill Bit

1410mm, 1460mm, 1580mm

3.6mm x 9mm

Camber Height

Flex

1mm

7/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź658.00

MID

TAIL

TIP MID TAIL

FIRM

Construction


SKIS | DIRECTOR 107 CARBONLITE


Director 107 Carbonlite ALTUM SERIES

Lightweight versatility. The introduction of the Carbonlite construction to the Director 107 only accentuates its characterful and versatile nature. The weight-saving is largely noticeable under foot which then translates to quick turns through the trees, easier boot packs to remote sidecountry, and a more balanced and even feel in the air.

Technical Details

TIP

Dimensions

Traditional : Poplar/Ash core with flax and carbon-fibre

134 - 107 - 124 (181cm)

Sizes

Weight

181cm, 191cm

1640g, 1705g

Waist

Colour

107cm

Transparent Purple

Radius

Recommended Mounting Position

22m, 25m

860mm, 905mm (from tail to boot centre)

Effective Edge

Drill Bit

1460mm, 1580mm

3.6mm x 9mm

Camber Height

Flex

1mm

6/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź898.00

MID

TAIL

TIP MID TAIL

FIRM

Construction


SKIS | ALTUM 114


Altum 114 ALTUM SERIES

From first lifts to last light. Utilising our new twin rocker profile the Altum 114 is designed to bring a new level of flexibility to the mountain, with the 114mm waist you can easily release the tail at the end of the turn giving you an intuitive and adaptable feel to a ‘big’ ski. Our signature tip and tail taper pushes more width into the forefront of the ski, this allows for a forward mounting position making turn initiation easier without sacrificing float and balance in the deep snow. A resort friendly 2mm of camber and hard carving sidecut provides a stable and agile platform to give you an adaptable ski for all over the mountain and sidecountry adventures.

Technical Details Construction

TIP

Dimensions

143 - 114 - 132 (187cm)

Sizes

Weight

179cm, 187cm

TBC

Waist

Colour

114cm

Midnight Navy and Purple

Radius

Recommended Mounting Position

22m, 24m

860mm, 905mm (from tail to boot centre)

Effective Edge

Drill Bit

1411mm, 1491mm

3.6mm x 9mm

Camber Height

Flex

2mm

7/10

Camber Profile

MSRP

Tip and tail rockered camber

€658.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with fibre-glass


SKIS | R 98


R 98 R SERIES

Power and security with a smooth ride. Built to be light on the way up and strong on the way down, the new R 98 is our all-access free-touring model with freeride at its core. The R 98 takes a lot of its design features from its bigger brother including minimal camber and tip rocker for ease of turning, a medium flex pattern and a longer turn radius for stability in the changeable backcountry snow conditions. The revised, lighter weight aluminium tail allows the ski to be cut deep into the snowpack to create a solid anchor point as well being a secure skin attachment.

Technical Details Construction

TIP

Dimensions 128 - 98 - 109

Sizes

Weight

167cm, 176cm, 185cm

1600g, 1700g, 1990g

Waist

Colour

98cm

Maroon and Deep Maroon

Radius

Recommended Mounting Position

22m, 25m, 27m

740mm, 780mm, 820mm (from tail to boot centre)

Effective Edge

Drill Bit

1240mm,1320mm, 1400mm

3.6mm x 9mm

Camber Height

Flex

2mm

8/10

Camber Profile

MSRP

Tip rockered camber

â‚Ź698.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with fibre-glass


SKIS | R 98 CARBONLITE


R 98 Carbonlite R SERIES Power and security with a smooth ride. Built to be light on the way up and strong on the way down, the new R 98 is our all-access free-touring model with freeride at its core. The R 98 takes a lot of its design features from its bigger brother including minimal camber and tip rocker for ease of turning, a medium flex pattern and a longer turn radius for stability in the changeable backcountry snow conditions. The revised, lighter weight aluminium tail allows the ski to be cut deep into the snowpack to create a solid anchor point as well being a secure skin attachment.

Technical Details Construction

TIP

Dimensions 128 - 98 - 109

Sizes

Weight

167cm, 176cm, 185cm

1425g, 1520g, 1610g

Waist

Colour

98cm

Maroon and Crimson Red

Radius

Recommended Mounting Position

22m, 25m, 27m

740mm, 780mm, 820mm (from tail to boot centre)

Effective Edge

Drill Bit

1240mm,1320mm, 1400mm

3.6mm x 9mm

Camber Height

Flex

2mm

8/10

Camber Profile

MSRP

Tip rockered camber

â‚Ź998.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with flax and carbon-fibre


SKIS | R 108 CARBONLITE


R 108 Carbonlite R SERIES

Your companion for day-tours and alpinism. The R 108 Carbonlite is Whitedot’s most versatile all-access ski. The Carbonlite version offers incredible weight-saving along with a slightly softer flex pattern to make your ascent easier. Combine this with the in-built pop that Carbon brings yet smoothed out with our addition of Flax. The ski retains the fluidity and edge control of the original R 108.

Technical Details Construction

TIP

Dimensions

138 - 108 - 119

Sizes

Weight

177cm, 186cm

1595g, 1740g

Waist

Colour

108cm

Crimson Red and Maroon

Radius

Recommended Mounting Position

24.5m, 28m

780mm, 820mm (from tail to boot centre)

Effective Edge

Drill Bit

1400mm, 1445mm

3.6mm x 9mm

Camber Height

Flex

2mm

8/10

Camber Profile

MSRP

Tip rockered camber

â‚Ź998.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with flax and carbon-fibre


SKIS | RAGNAROK 118


Ragnarok 118 RAGNAROK SERIES

Big mountain experiences more accessible. For those who know and have skied the second generation Ragnarok, absolutely love it. And for that reason, it remains at the forefront of the Whitedot range The Ragnarok 118 takes the concept and vision of its originator Fred Syversen and create its own cutting edge category, the Fun Charger.

Technical Details Construction

TIP

Dimensions

143 - 118 - 130

Sizes

Weight

190cm

2285g

Waist

Colour

118cm

Cyan and Midnight Navy

Radius

Recommended Mounting Position

30m

865mm (from tail to boot centre)

Effective Edge

Drill Bit

1530mm

3.6mm x 9mm

Camber Height

Flex

1mm

9/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź698.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with fibre-glass


SKIS | RAGNAROK 118 CARBONLITE


Ragnarok 118 Carbonlite RAGNAROK SERIES Big mountain with maximum confidence. The Carbonlite edition of the Ragnarok 118 not only brings increased torsional stiffness for security on the steeps but combines it with the Carbonlite weight saving to help you access them. Our Carbon and Flax blend gives a light and reactive ride in all terrain allowing you to ride any face or feature with maximum confidence. The Ragnarok 118 Carbonlite will make the big mountain experience even more accessible.

Technical Details Construction

TIP

Dimensions

143 - 118 - 130

Sizes

Weight

190cm

1905g

Waist

Colour

118cm

Transparent Cyan and Midnight Navy

Radius

Recommended Mounting Position

30m

865mm (from tail to boot centre)

Effective Edge

Drill Bit

1530mm

3.6mm x 9mm

Camber Height

Flex

1mm

8/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź998.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with flax and carbon-fibre


SKIS | RAGNAROK ASYM


Ragnarok ASYM RAGNAROK SERIES A statement in innovation and progress.

Skiing off-piste you are rarely carving a perfect turn, instead you

This balances the different forces working on each ski as you go

use drifting, speed checking, carving and combinations of these to

through the turn, making for an intuitive and two footed ride.

control your line. The ASYM is built for deep days on the mountain and to deal with The ASYM’s signature design is off-set taper, making a left and right

the changeable conditions you face. We selected our Traditional

foot specific ski. While the sidecut radius remains a constant 30m

fibre-glass construction for this new ski because not only is it our

on both edges, the tip and tail of the outside edge tapers earlier than

dampest construction but it also adds mass to the ski, making for a

the inside creating an inside ski with a shorter effective edge that is

stable and confidence-inspiring ride all over the mountain.

easier to control.

Technical Details Construction

TIP

Dimensions

147 - 122 - 134

Sizes

Weight

190cm

TBC

Waist

Colour

122cm

Dark Navy and Dark Grey

Radius

Recommended Mounting Position

30m

865mm (from tail to boot centre)

Effective Edge

Drill Bit

1580mm

3.6mm x 9mm

Camber Height

Flex

1mm

8/10

Camber Profile

MSRP

Tip and tail rockered camber

â‚Ź698.00

MID

TAIL

TIP MID TAIL

FIRM

Traditional : Poplar/Ash core with fibre-glass


SKIS | PREACHER


Preacher ALL-MOUNTAIN

From Piste to Powder, effortlessly. Our all-mountain, single quiver, cambered, ski. The Preacher has won independent ski tests, Freeride World Tour podiums and professional athlete accolades. The Preacher offers a lot of floatation in deep powder yet the positive camber and full length torsional stiffness allows for an incredible edge hold on even the hardest pistes. A 155mm wide tip allows for ease of turn initiation, and the tip is tapered to avoid hooking in soft snow.

Technical Details

TIP

Dimensions

Traditional : Poplar/Ash core with fibre-glass

155 - 112 - 133

Sizes

Weight

179cm, 189cm

2180g, 2305g

Waist

Colour

112cm, 112cm

Green and Forest Green

Radius

Recommended Mounting Position

16.5m, 19m

800mm, 845mm (from tail to boot centre)

Effective Edge

Drill Bit

1580cm, 1660cm

3.6mm x 9mm

Camber Height

Flex

6mm, 6mm

8/10

Camber Profile

MSRP

Positive camber under-foot

â‚Ź658.00

MID

TAIL

TIP MID TAIL

FIRM

Construction


SKIS | PREACHER CARBONLITE


Preacher Carbonlite LIGHTWEIGHT ALL-MOUNTAIN

From Piste to Powder, effortlessly. Our unique Carbon layup brings added weight-saving and durability to the Preacher and combines it with a shape that continues to give large amounts of float in the fresh snow. The positive camber and increased torsional stiffness from the Carbonlite construction brings an increase in edge hold on hard packed snow, decreasing fatigue and allowing you to ski for longer and harder.

Technical Details

TIP

Dimensions

Carbonlite : Poplar/Ash core with flax and carbon-fibre.

155 - 112 - 133

Sizes

Weight

179cm, 189cm

1755g, 1905g

Waist

Colour

112cm

Transparent Green

Radius

Recommended Mounting Position

16.5m, 19m

800mm, 845mm (from tail to boot centre)

Effective Edge

Drill Bit

1580cm, 1660cm

3.6mm x 9mm

Camber Height

Flex

6mm

7/10

Camber Profile

MSRP

Positive camber under-foot

â‚Ź898.00

MID

TAIL

TIP MID TAIL

FIRM

Construction







Contact

Photographers

Please feel free to contact us, we aim to respond as soon as possible

John Thornton @johnthornton_photography

and with as much detail as possible regarding your enquiry.

Hugo Peckham @hugopeckham Loris Poussin @lorispoussin

info@whitedotskis.com

Tobi Hipp @tobi.hipp

www.whitedotskis.com

Steve Walton @freezemedia Aidan Bolger @aidanbolger

Sales & Distribution

Daniel Wildey @danielwildeyphotography Valle_Poss @valle_poss

sales@whitedotskis.com

Clara-Johanna Possert @clara__johanna

Follow Whitedot

Icons

@whitedotskis

Smash Icons Pretty Icons Those Icons

All material, imagery and designs Š Whitedot Skis Ltd 2018


www.whitedotskis.com


Millions discover their favorite reads on issuu every month.

Give your content the digital home it deserves. Get it to any device in seconds.