WallArt Wood Look Planks-felrakási útmutató

Installation Manual

How to install the Planks

Let the planks acclimatize for 24 Hours

Tools needed:

Metal Ruler

Utility Knife

Pencil

Make sure back of the planks and walls are clean and dry

Choose your pattern

1

2

3

4

1

2

3

4

Create starting lines in the middle of your wall

Use WallArt Power Tape

Apply WallArt Power Tape to the back of the Plank

Cut WallArt Power Tape to size with a utility knife

Peel the backing from the WallArt Power Tape

Position the plank along your line

Press the planks into place

How to remove the Tape Put a hair dryer on low heat and point it at the tape, holding it a few inches away.

Move the hairdryer over the length of the tape evenly.

The heat will loosen the adhesive.

Slowly peel off the tape.

When the tape is gone, scrub off the sticky residue that remains with a soapy cloth.

How to cut the Planks to size

Measure plank

Mark exact point

Draw cutting line

Cut the plank to size using a metal ruler and a utility knife

Bent the plank gentle till in breaks