How To Create Your Own Bolo Tie Bolo ties are a fantastic fashion choice that can replace a regular tie, giving you a more Western look. They are fashionable in the American West, especially in Arizona, New Mexico, or Texas. You can get bolo ties pre-made, but an entertaining activity is to make one yourself. On the internet there is a large selection of bolo tie items available to create one-of-a-kind tie accessory. To create a bolo tie, for starters gather your bolo tie parts. Not many parts are needed so this should be relatively simple. Simply by using a decorative cording, the tie itself consists of only a decorative slide. The ends of the cord are decorated using metal bolo tips. You will have to purchase a bolo slide, metal tips, leather cording along with a decorative stone or pendant when making your own unique bolo tie. Pliers, a metal file, glue and scissors are also tools which will be required. First and foremost, decide the length of cording you will need. You can buy leather cord prebraided, or braid your own. You will need a portion about 40 inches long for the tie. To discover the exact length you will need, place the cord around your neck. Trim the cording if you decide it is too long and it really should be above the belt line. Following that, check that the leather cord fits within the holes in the bolo slide. The metal could possibly be bent a little if the cord is not able to fit with the slide. Take your metal file, and file out any bumps in the bolo slide where the cord goes through it. Not only would smoothing out the metal be better off for the cording, it will be able to work for a lot longer. With the stone or pendant you decided on, make certain there is a flat surface to attach the ornamental piece to the slide. Using the jewelry glue or super glue, attach the stone to the slide and allow it to fully dry. It's about time to put the bolo tie together once the glue has sufficiently dried. With the bolo slide on hand, with care thread each end of the cord through the holes and carefully tighten the bends of the slide using pliers so there is a bit of friction there to hold it it is in place. You need to be able to easily adjust the cording but tight enough that it stays positioned. A final step is to add the bolo tips using a tiny amount of glue inside and inserting the ends of the cord. To bend the tips slightly to hold them in place, the pliers could be used, securing them onto the cording. And with that last step you are basically finished. Test out your new bolo tie by positioning it over your head and sliding the bolo slide up to the height you like. A lower placed slide will look more casual whereas a higher resting slide will look more professional. After you have made a single bolo tie and it turned out nicely, this may be a great incentive to make others for friends and family. Bolo tie parts can be found in a huge variety of styles, so the possibilities are endless in terms of design and colors. The leather may be braided together using various colors or beads can also be added for an extra bit of pizzazz. Making your own bolo ties can be accomplished in a multitude of ways where you can display your creative side, crafting amazing pieces. Very quickly, you will surely become a bolo tie professional!
Rocky Mountain Western, LLC
Page 1