EssentialLEDs Catalog 2015 by Visual Lighting Technologies

visual lighting technologies

EssentialLEDs

• linear fixtures • specialty display fixtures • led light panel

2015

Visual Lighting Technologies

EssentialLEDs

Products: ELP-L, 3SL, 2RL, 1S

page 2

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Products: ELP-G, 3SL, ELP-L, ELP-G

page 3

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

1S Small Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2SL Medium Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . .16

3SL Large Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . .17

4SL Medium Square Extrusion Tall . . . . . . . . . . . . . . . . . . . . . . .18

1QL Quarter Round Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . 19

1R Small Round Extrusion . . . . . . . . . . .. . .. . . . . . . . . . . . . . 20

2RL Large Round Extrusion . . . . . . . . . . . . . .. . . . . . . . . . . . . .21

1EL Demi-Ellipse Extrusion . . . . . . . . . . . . . .. . . . . . . . . . . . . 22 Linear Mounting . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .24 Special Mounting Options for 3SL & 4SL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Special Mounting Options for 1R & 2RL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30

EFLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .36 page 4

EFLEXW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

5SLW Square Extrusion - Exterior. . . . . . . . . . . . . . . . . . . . . .41 LightRun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44 Mini LightRun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 LightRun Dual Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48 Elegance² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 Elegance Puck . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54 Orb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 LED Light Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .60 ELP-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .64 ELP-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Constant Voltage Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . .74 Constant Current Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . 79 Dimming & Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85 NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) 20” total

NON-DIM

Wiring Schematics. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

128” total

DIMMABLE with HMLD Magnetic Low-Voltage Driver (i.e. VLT Hybrid Magnetic Linear Dimming Drivers)

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 208” total

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com D I M

page 5

Visual Lighting Technologies

EssentialLEDs

About EssentialLEDs® The EssentialLEDs® collection from Visual Lighting Technologies offers linear and panel LED products with exceptional light quality, tremendous flexibility and highly competitive pricing. With this edition of our catalog, we’re proud to offer new LED choices that continue to increase the energy efficiency and flexibility of our products, along with new fixture and lensing options. EssentialLEDs® have become the go-to option for accent, task and display applications, offering the high lumen outputs, high CRI, full color temperature range and imaginative fixture choices specifiers need. And each EssentialLEDs® fixture offers the same careful craftsmanship, high customizability, and quick turnaround as before. Interior Linear fixtures now include 8 different extrusion shapes and sizes, in lengths up to just under 8 feet (95.28"). There’s a perfect extrusion for any interior application, from toe kicks and wall washes to shelf and showcase displays. Our Specialty Display collection has been developed with lighting designers for the world’s top luxury brands, and now includes the linear LightRun in single or dual-color versions, the very compact Mini LightRun, the rectangular Elegance2, Elegance Pucks in round and square versions, and adjustable Orb spotlight fixtures. The original LightRun, new dual-color LightRun, and new Mini LightRun all provide uniform illumination without the distraction of reflected LED diodes or multiple shadows. For Exterior Linear applications, our 5SLW fixture ventures into wet locations with our first IP67 extrusion, offering a slender profile for delineating ledges, seat walls and other exterior features, available in a wide range of lengths and color temperatures. Our two EssentialLEDs® Light Panel options continue to offer fantastically even backlighting and are now available at just 4w/per square foot, the lowest wattage levels ever. ELP-L Light Panel evenly backlights acrylic, glass, fabric or onyx panels in any size or shape (up to 60" x 120" in a single panel), with easy wall-mount installation using the pre-drilled holes. And our ELP-G product is the perfect solution for the impeccable backlighting of stretched-fabric ceiling products. And finally, for those times when a flexible product is the best solution, our EFlex and EFlexW products use the same high-quality LEDs and offer our full range of color temperatures.

About the LEDs Visual Lighting Technologies is proud to use Nichia LEDs as the applied LED for all of our EssentialLEDs® Linear, Specialty Display and Panel lighting products. As one of the world’s leading LED manufacturers, Nichia has leveraged its vast experience with phosphors to create beautiful white light LEDs in a full range of color temperatures, and each new generation of LEDs brings us higher lumen outputs and lower energy use. In addition, the selective binning of LED color temperatures is an important element of EssentialLEDs’® superior quality, and you can read more about that process on the opposite page.

page 6

This catalog offers the newest, most energy-efficient LED options for both linear and panel products, while maintaining the same exceptional lumen outputs of our previous LED boards. For each of our product categories, you'll find a "Fundamentals" chart that makes it easy for specifiers to compare LED board options across a range of characteristics, including lumen output, power consumption, LED efficacy, color temperature and CRI. As in our previous catalog, we have emphasized lumen output – rather that wattage – as the most informative measure for differentiating between the various LED options.

All EssentialLEDs® products are designed and manufactured in Southern California. Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Binning & Chromaticity Per ANSI Standards, as followed by Nichia and other LED manufacturers, nominal CCT bins (i.e. “the 3500°K bin") include a range of actual color temperatures; for example, the 3500°K bin can vary by ±245°K (7 MacAdam Ellipses). Binning for EssentialLEDs® is more selective than the ANSI Standard bin, first limiting our overall selection to the four central bins within the ANSI bin (3 MacAdam Ellipses, shown in blue below). Then, on a project-by-project basis, we narrow the selection again, using LEDs from just one of the five numbered bin areas shown. This makes our effective binning range on any given project a remarkable ±60°K*, just 2 MacAdam Ellipses (“Two Step"). So whether you’re lighting a showcase, grazing a wall, or backlighting a panel, you’ll have exceptionally consistent light output and the precise color temperature specified. (*±60°K from median CCT in each of the bins detailed) ANSI Standard Binning: ±245°K | 7 MacAdam Ellipses

0.45

0.40

3500K 4000K

MacAdam Ellipses

VLT Project Binning Uses Just 1 of the 5 Smaller Bins Shown in Blue

2400K

2700K

3000K

VLT Project Binning: ±60°K | 2

0.45

3500K Bin

4500K

Blackbody Curve

0.40

2 1 3 5

0.35

Blackbody Curve

0.45

0.40

0.35

0.50

0.40 X

0.45

VLT Overall Binning - Limited to Five Central Bins within the Nominal CCT Bin - (3500°K Example) sw3558

sw3567

0.4016

0.4045

0.4117

0.4085

0.3897

0.3975

0.4009

0.3928

0.3989

0.4016

0.4085

0.4054

0.3819

0.3897

0.3928

0.3847

sw35FF

sw3576

CRI Details Index CRI 01 CRI 02 CRI 03 CRI 04 CRI 05 CRI 06 CRI 07 CRI 08 CRI 09 CRI 10 CRI 11 CRI 12 CRI 13 CRI 14 CRI (Ra)

0.4036

0.4066

0.4136

0.4103

0.3873

0.3952

0.3985

0.3902

0.4085

0.4117

0.4189

0.4154

0.3928

0.4009

0.4044

0.3959

0.4054

0.4085

0.4154

0.4120

0.3847

0.3928

0.3959

0.3875

sw3585

(3545 & 3590 LED Boards) X

Color

Luminaire

0.3692 0.3794 0.3772 0.2892 0.2578 0.2360 0.2770 0.3259 0.5492 0.4376 0.2551 0.1517 0.3690 0.3538 -

0.3291 0.3955 0.4880 0.3963 0.3078 0.2365 0.2372 0.2584 0.3045 0.4601 0.4162 0.1490 0.3510 0.4284 -

Light greyish red Dark greyish yellow Strong yellow green Moderate yellowish green Light bluish green Light blue Light violet Light reddish purple Strong red Strong yellow Strong green Strong blue Light yellowish pink (skin) Moderate olive green (leaf ) Average level of CRI 01- 08

98 97 98 97 97 93 92 89 80 97 99 78 98 99 95

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 7

Visual Lighting Technologies

EssentialLEDs

About Interior Linear EssentialLEDs® Linear products combine the best qualities of LED technology - the small size, long life, energy efficiency and great lumen output - to simplify the application of light in interior spaces.

Products: 2RL, 2RL,1S

EssentialLEDs® Linear extrusions offer an intriguing range of styles and sizes that are perfect for accent, task and display applications, with a large range of mounting options to provide a solution for most every installation challenge. EssentialLEDs® Linear products offer custom sizing for perfect integration in a wide variety of architectural or display spaces, while the high CRI, exceptional binning and full range of CCT choices ensure that every application will beautifully enhance the overall space.

page 8

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W003

Interior Linear Fundamentals

Choose from 6 LED Boards for a Range of Lumen, Wattage & CRI Options

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. LEDs available in 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K & 5000K; options vary depending on board choice. 2680

3690

4690

1118

2545

2640

3645

4645

5163

(2 x 2640)

(2 x 3645)

(2 x 4645)

LUMEN OUTPUT

173 lm/ft [554 lm/m]

366 lm/ft [1200 lm/m]

429 lm/ft [1407 lm/m]

443 lm/ft [1453 lm/m]

516 lm/ft [1692 lm/m]

548 lm/ft [1797 lm/m]

666 lm/ft [2185 lm/m]

729 lm/ft [2391 lm/m]

774 lm/ft [2539 lm/m]

POWER CONSUMPTION

2.7 w/ft. [8.9w/m]

5.5w/ft. [18.0w/m]

3.5 w/ft [11.5 w/m]

4.5 w/ft. [14.8w/m]

6.6 w/ft. [21.65w/m]

7.0 w/ft. [23.0w/m]

9.0 w/ft [29.5w/m]

92+

ALL

EXCEPT 2000K

ALL

Except 2000K & 2400K

ALL

LED Board

CRI CCT OPTIONS

EXCEPT 2000K

ALL

Except 2000K & 2400K

APPLIED LED

Nichia 157b

Nichia 157a

Nichia 757d

Nichia 157b

Nichia 757d

LED EFFICACY*

108 lm/w

138 lm/w

110 lm/w

126 lm/w

108 lm/w

138 lm/w

110 lm/w

126 lm/w

BEST USED FOR

LOW OUTPUT

FOCUSING LENS

STANDARD

HI CRI

HI OUTPUT

PITCHLESS**

DUAL STANDARD

DUAL HI CRI

DUAL HI OUTPUT

LENSING FINISH

All fixtures available in silver or black anodized finish; 1R, 2RL, 1QL & 1EL also available in white or bronze powder coating; custom finishes upon request

LENGTHS

Up to 95.28" [2.42m]; see Length & Wattage Table (page 14) for all standard length options Driver Type: Constant Voltage, Class 2 UL Listed or ETL Listed as a system Input Voltage: 24vDC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, or OT DIM via 0-10 volt with Electronic Driver Feed Wire: 96" [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

Lensed and unlensed options available; lens options include clear or three levels of Opal. Focusing lenses available for 2SL, 2RL and 1QL extrusions; see page 13 for more information. See pages 10 & 11 for full photometric comparisons

ELECTRICAL

*Based on 3500K CCT **Pitchless LED board: no space between LEDs eliminates dot pattern, multiple shadows; provides full diffusion with 2SL, 2RL or 1QL extrusions.

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty

Mounting options differ according to extrusion; may include fixed and/or adjustable clips, mounting end caps, bushings, free-standing mount, recessed options; up to IP54

(UL 2108, 8750 & 962);

Marked;

Listed; LM79, LM80; Title 24; IP20 or IP54 (Dry/Damp)

- Suitable for installation within the closet storage space The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 12.

LINEAR LEDs EssentialLEDs® Linear products provide bright and even linear lighting for interior applications such as: • Architectural Accents such as Coves, Niches, Toe Kicks, Wall Grazing, etc. • Under Cabinet & Task Lighting • Display Lighting EssentialLEDs® offer six LED boards that vary in lumen output, energy use, color temperature and CRI. See "Best Used For" information on chart above for help choosing the best LED board for your application. EssentialLEDs® Linear products are available in numerous aluminum extrusion profiles, with a wide range of mounting options to choose from. EssentialLEDs® Linear products are dimmable and available in custom lengths up to 95.28"[2.42m]. Visit the VLT website for application photos and the most recent IES files.

MADE in USA Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 9

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X023

2SL

3SL

106

2640

3.5

429

160

427

200

3645

4.5

443

300

378

269

4645

4.5

516

352

440

316

548

261

6.6

467

230

2.7

139

120

103

231

119 236

105

117

128

105

2545

5.5

300

242

227

693

180 306

241

251

193

136

287

267

235

193

175

129

2640

3.5

325

174

224

356

290 246

223

250

204

123

295

166

242

125

192

3645

4.5

328

298

215 344

285

309

230

163

299

292

245

296

182

141

4645

4.5

428

349

255 351

343

366

275

198

390

342

320

347

238

165

5163

6.6

407

265

253 479

336

400

275

204

367

239

303

177

240

137

1118

2.7

156

117

2640

3.5

343

165

203

136

166

134

3645

4.5

385

197

224

163

189

101

154

4645

4.5

456

350

263

312

207

164

170

123

2680*

7.0

666

269

357

244

299

150

260

123

3690*

9.0

729

366

389

260

323

170

260

123

4690*

9.0

774

665

492

551

387

305

316

230

1118

2.7

2640

3.5

152

116

122

3645

4.5

171

127

138

104

4645

4.5

181

162

149

117

111

1118

2.7

173

120

(2 x 2640)

(2 x 4645)

2RL

page 10

No Lens

5163 1118

(2 x 3645)

4SL

Opal 3, Heavy

143

Opal 2, Medium

120

Opal 1, Frosted

173

Lens 4 ( 78° - 82° )

Lens 3 (30° - 42° )

Lens 2 ( 18° - 31° )

Footcandles at 12"

2.7

Lens 1 ( 18° )

Lumens per Foot

1118

Clear Lens

Watts per Foot

LED Board

Lumens/footcandles Table

2640

3.5

429

160

3645

4.5

443

300

4645

4.5

516

352

548

261

5163

6.6

1118

2.7

139

120

103

231

119

236

105

117

128

105

2545

5.5

300

242

227

693

180

306

241

251

193

136

287

267

235

193

175

129

2640

3.5

325

174

224

356

290

246

223

250

204

123

295

166

242

125

192

3645

4.5

328

298

215

344

285

309

230

163

299

292

245

296

182

141

4645

4.5

428

349

255

351

343

366

275

198

390

342

320

247

238

165

5163

6.6

407

265

253

479

336

400

275

204

367

239

303

177

240

137

All photometric data based on 3500°K LEDs. See Light Output Conversion information on page 11. *Lumen/footcandle outputs for 3SL dual-row fixtures are for both boards at full strength; when different CCTs are specified for variable-CCT option, one board is dimmed to adjust CCT; total lumen/footcandle output will be lower.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X023

Footcandles at 12"

139

120

103

231

119

236

105

117

128

105

2545

5.5

300

242

227

693

180

306

241

251

193

136

287

267

235

193

175

129

2640

3.5

325

174

224

356

290

246

223

250

204

123

295

166

242

125

192

3645

4.5

328

398

215

344

285

309

230

163

299

292

245

296

182

141

4645

4.5

428

349

255

351

343

366

275

198

390

342

320

347

238

165

5163

6.6

407

265

253

479

336

400

275

204

367

239

303

177

240

137

1118

2.7

132

117

2640

3.5

283

133

3645

4.5

323

151

4645

4.5

415

359

5163

6.6

378

186

EFlex

1122

2.2

EFlex W

1122

2.2

173

1118

2.7

161

140

106

2640

3.5

337

172

294

152

224

105

179

3645

4.5

364

183

336

170

254

114

201

4645

4.5

388

186

340

174

260

119

208

Light Run

1184

6.6

385

257

Mini LR

5163

6.6

407

187

Light Run Dual Color

1188

6.6

424

193

1QL

1EL

5SLW

Opal 3, Heavy

Opal 1, Frosted

Lens 4 ( 78° - 82° )

Lens 3 ( 30° - 42° )

Lens 1 ( 18° )

No Lens 192

Opal 2, Medium

Lumens per Foot

2.7

Lens 2 ( 18° - 31° )

Watts per Foot

1118

Clear Lens

LED Board

Lumens/Footcandles Table

Light Output Conversion CCT

Light Output Conversion

2000°K

2400°K

2700°K

3000°K

3500°K

4000°K

4500°K

5000°K

0.88

1.0

1.08

3500°K LEDs are used for all photometric testing. To determine lumen outputs for other color temperatures, use the designated multiplier in the table above.

IES files for LED and extrusion options can be found on our website at www.essentialLEDs.com. You’ll find them on the “downloads" tab for each extrusion type.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 11

Visual Lighting Technologies

EssentialLEDs

Fixture Extrusions 1S - Small Square

(0.0534 lb [0.0795 kg/m] per foot)

1QL- Quarter Round/Lensed (0.1899 lb/ft [0.2826 kg/m] per foot)

2SL - Medium Square/Lensed

3SL - Large Square/Lensed

4SL - Medium Square Tall/Lensed

1R - Small Round

2RL - Large Round/Lensed

1EL - Demi Ellipse/Lensed

(0.1653 lb [0.2460 kg/m] per foot)

(0.1026 lb [0.1527 kg/m] per foot)

(0.2955 lb [0.4398 kg/m] per foot)

(0.1623 lb [0.2415 kg/m] per foot)

(0.2955 lb [0.4398 kg/m] per foot)

(0.3300 lb [0.4911 kg/m] per foot)

Product Listings & Driver Selection EssentialLEDs® products are multiple-listed, allowing you to determine the best listing for your individual application. A UL Listing requires the use of a UL Listed Class 2 power supply. See the table on pages 72 & 73 to determine the best UL Listed driver for your application. EssentialLEDs® Linear and Specialty Display fixtures are listed to UL Standards 2108, 8750 and 962. For millworkers, a UL Listed EssentialLEDs® system can be easily integrated into casework for a UL65 listing. Our large selection of ETL Listed drivers can be used with any of our Linear, Panel or Specialty Display fixtures. See the table on pages 72 & 73 to determine the best ETL Listed driver for your application All EssentialLEDs® products are ETL Listed to UL Standards 2108, 8750 and 962 when used as part of an EssentialLEDs® system. The CE Listing includes RoHS compliance (Restriction of Hazardous Substances Directive), insuring products will not contain any of the following substances: lead (Pb), mercury (Hg), cadmium (Cd), Hexavalent chromium (Cr6+), Polybrominated biphenyls (PBB) or Polybrominated diphenyl ether (PBDE). EU Countries that require RoHS compliance include Austria, Belgium, Bulgaria, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom. Countries requiring RoHS or “similar" restrictions include Canada, China, Japan, New Zealand and South Korea. CE Listed drivers are required for a CE Listed system.

page 12

In addition, all EssentialLEDs® Interior Linear products are California Title 24 certified (Manufacturer Code: VTE, Brand Code EL4) when used with the 3545 or 3590 LED boards; this certification recognizes EssentialLEDs® Linear products as high efficacy LED products, in compliance with the applicable provisions in the California Energy Commission’s Appliance Efficiency Regulations. More information can be found at: http://www.title24-ca.com/title24-articles/title24-standards/

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Lensing Options Lensing on a linear LED product performs multiple functions, and the best choice for your project depends on the extrusion you use and the needs of your application. Each fixture configurator includes a “Lens Option" component, which lists all lens options for that extrusion. (See the chart on pages 10 & 11 for complete photometric comparisons). These are the factors to consider when choosing a lens: Protection of the LEDs: A lens protects the LEDs from dust, dirt, splashes and cleaning liquids. For the 1S fixture, a Slide-On Lens provides these benefits, but because the extrusion is open on the ends, it remains an IP20 fixture. For all other extrusions, the lens “closes" the fixture and provides an IP54 (dry/damp) rating. Softening the Diodes: LED diodes produce a remarkable amount of light, but in direct or reflected view, the light point of the LED can be perceived as glare; diodes also create a dot pattern that may be distracting and aesthetically undesirable. Depending on the extrusion used, lensing can soften or fully eliminate both the glare and dot pattern of the LEDs. Except with 5163 LED board, full diffusion is possible only with the 3SL & 4SL extrusions (more about that below); for all other lensed fixtures, the use of an Opal Lens (1, 2 or 3) will provide varying degrees of diffusion to “soften" the light point and reduce reflections. The “pitchless” spacing of LEDs on the 5163 LED board prevents dot patterns and multiple shadowing, and allows full diffusion of the diodes when using the 2SL, 2RL or 1QL extrusion with Opal 2 or Opal 3 lensing. Impact on Lumen Output: Lensing impacts the lumen output of your fixture. The chart on pages 10 & 11 presents lumen and footcandle data for each extrusion + LED board combination when used with clear, opal or focusing lenses. Lens options vary based on extrusion used. Full Diffusion for Direct View Applications: Full diffusion of LED diodes involves two factors - the opacity of the lens, and the distance between lens and diodes. The 3SL and 4SL extrusions were designed for direct-view applications and provide enough distance between the lens and the LEDs for full diffusion. When combined with the Opal 2 or Opal 3 lenses, they can be used for vanity lighting or decorative lines of light. The Opal 2 option allows more light output (preferable for a vanity application), while Opal 3 is more subtle for a decorative effect. Light Distribution: The beam angle for each extrusion with Clear Acrylic Lens is shown on the fixture cut sheet. The natural distribution of an unlensed LED is 116°, but the beam angle produced by a fixture will vary based on the extrusion shape and placement of the LED board in the extrusion. When using Focusing Lenses, beam angle results will differ depending on the LED board used. The 1118, 2545 & 5163 boards use a narrower LED, which produces a tighter distribution when used with a focusing lens. The same focusing lens combined with the larger 2640, 3645 and 4645 LEDs will produce a wider beam angle. The beam angles shown below apply to 2SL, 2RL or 1QL fixtures when used with focusing lenses. Beam Angles (FWHM) - Refer to photometric data on pages 10 & 11 to see how lensing affects lumen and footcandle output When used with:

Lens 1 (L1)

“Bubble” Profile, Clear

Lens 2 (L2)

Lens 3 (L3)

“Bubble” Profile, Frosted

Flat Bottom, Frosted

Lens 4 (L4)

Contour Profile, Frosted

1118 or 2545 LED Board

18°

22°

30°

78°

5163 LED Board

Not Recommended

18°

30°

78°

2640, 3645 or 4645 LED Board

Not Recommended

31°

42°

82°

Field angle for Lens 1 is 27°; field angle for all other lenses is greater than 120° All flat lenses (PG, OP1, OP2 and OP3) are notched for a flush top surface

Focusing Lenses (L1, L2, L3 and L4) are convex and protrude 0.074"(1.88mm) above the fixture surface LENS

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 13

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X053

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions. FIXTURE LENGTHS DIFFER when specifying 5163 LED board! STANDARD FIXTURE LENGTHS

STANDARD FIXTURE LENGTHS - 5163

CODE

FINISHED FIXTURE

1118

2640

2680

2545

4 .72" [120mm]

0 .9w

1 .2w

2 .3w

1.8w

1 .5w

8 .66" [220mm]

1 .8w

2 .4w

4 .7w

3.7w

12 16 20

12 .60" [320mm] 16 .54" [420mm] 20 .47" [520mm]

2 .7w 3 .6w 4 .5w

3 .5w 4 .7w 5 .9w

7 .0w 9 .3w 11 .7w

24 .41" [620mm]

5 .4w

7 .0w

28 .35" [720mm]

6 .3w

32 .28" [820mm]

CODE

FINISHED FIXTURE

5163

3 .7w

4 .65" [118mm]

2.2w

3 .0w

7 .3w

8 .50" [216mm]

4.4w

5.5w 7.3w 9.2w

4 .5w 6 .0w 7 .5w

11 .0w 14 .6w 18 .3w

12 16 20

12 .36" [314mm] 16 .22" [412mm] 20 .07" [510mm]

6.6w 8.8w 11.0w

14 .0w

11.0w

9 .0w

22 .0w

23 .94" [608mm]

13.2w

8 .2w

16 .3w

12.8w

10 .5w

25 .6w

27 .80" [706mm]

15.4w

7 .2w

9 .4w

18 .7w

14.6w

12 .0w

29 .2w

31 .65" [804mm]

17.6w

36 .22" [920mm]

8 .1w

10 .5w

21 .0w

16.5w

13 .5w

33 .0w

35 .51" [902mm]

19.0w

40 .16" [1020mm]

9 .0w

11 .7w

23 .3w

18.3w

15 .0w

36 .6w

39 .37" [1000mm]

22.0w

44 .09" [1120mm]

9 .9w

12 .9w

25 .7w

20.1w

16 .5w

40 .2w

43 .22" [1098mm]

24.2w

48 .03" [1220mm]

10 .7w

14 .0w

28 .0w

22.0w

18 .0w

44 .0w

47 .08" [1196mm]

26.4w

51 .97" [1320mm]

11 .6w

15 .2w

30 .3w

23.8w

19 .5w

47 .6w

50 .94" [1294mm]

28.6w

55 .91" [1420mm]

12 .5w

16 .4w

32 .7w

25.6w

21 .0w

51 .2w

54 .80" [1392mm]

30.8w

59 .84" [1520mm]

13 .4w

17 .5w

35 .0w

27.5w

22 .5w

55 .0w

58 .66" [1490mm]

33.0w

63 .78" [1620mm]

14 .3w

18 .7w

37 .3w

29.3w

24 .0w

58 .6w

62 .51" [1588mm]

35.2w

67 .72" [1720mm]

15 .2w

19 .9w

39 .7w

31.2w

25 .5w

62 .4w

66 .37" [1686mm]

37.4w

71 .65" [1820mm]

16 .1w

21 .0w

42 .0w

33.0w

27 .0w

66 .0w

70 .23" [1784mm]

39.6w

75 .59" [1920mm]

17 .0w

22 .2w

44 .3w

34.8w

28 .5w

69 .6w

74 .09" [1882mm]

41.8w

79 .53" [2020mm]

17 .9w

23 .4w

46 .7w

36.7w

30 .0w

73 .4w

77 .95" [1980mm]

44.0w

83 .46" [2120mm]

18 .1w

24 .5w

49 .0w

38.5w

31 .5w

77 .0w

81 .81" [2078mm]

46.2w

87 .40" [2220mm]

19 .7w

25 .7w

51 .3w

40.3w

33 .0w

80 .6w

85 .67" [2176mm]

48.4w

91 .34" [2320mm]

20 .6w

26 .9w

53 .7w

42.2w

34 .5w

84 .4w

89 .53" [2274mm]

50.6w

95 .28" [2420mm]

21 .5w

28 .0w

56 .0w

44.0w

36 .0w

88 .0w

93 .39" [2372mm]

52.8w

3645 | 4545 3690 | 4690

The fixture lengths listed above are Standard Lengths. Any finished fixture length that differs from these lengths would be considered a Custom Length. Custom length fixtures have an overall finished length (including end caps) exactly as specified. Except for the 5163 LED Board, boards are limited to 4" increments, and the LED board that is the next size down will be centered inside the custom length fixture. The 5163 LED board can be cut into increments as small as one inch, making it our most flexible board for the specification of custom-length fixtures. Please contact factory for more information. LED fixtures have a generous field angle, so a fixture does not need to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixtures are most often used where the fixture is visible and an exact length is desired for aesthetic reasons. (Field Angle may be affected by lensing choice).

page 14

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W073

1S Small Square Extrusion - optional lens IP20 | Small square extrusion for linear lighting applications. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI), Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI). Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes.

.36" [9.3mm]

116°

(Photometrics vary based on CCT; see chart on pages 10 & 11 for output conversion and other data specific to your fixture).

.50" [12.8mm]

ELL- 1S - __________ - ___________ - _________ - _________ - __________ - __________ - _____________ CCT

LED

Finish

173 lm/ft, 2.7 w/ft, 1118 87 CRI

2000°K 1

AL Silver Anodized

2400°K 2

429 lm/ft, 3.5 w/ft, 85 CRI

BL Black Anodized

2700°K

443 lm/ft, 4.5w/ft, 3645 92+ CRI

3000°K

3500°K

516 lm/ft, 4.5w/ft, 4645 85 CRI

4000°K

4500°K

548 lm/ft, 6.6w/ft, 5163 87 CRI

5000°K

2640

1 2

C Custom

Lens Options NL No Lens

WE1 Default

SLC Clear Lens3 3 With Clear Lens, use 2SL Fixed Metal Mounting Clip (ELL-AC - 2SL - MC)

Listings

Wire Exit C Custom (see page 23)

Fixture Length

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm) FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

2640 & 4645 Boards Only Not Available for 3645 Board

Fixture Accessories ELL - AC - 1S - MC

ELL - AC - 1S - AMC

Fixed Metal Mounting Clip. Fixture with Adjustable Metal Mounting Clip. Offset No Lens snaps into clip. Allow 1 per 12" (min. screws allow flush mounting. Bends to desired 2 per fixture). See page 24. angle. Allow 1 per 12" (min. 2 per fixture). See page 24.

ELL - AC - S123 - AB

ELL - AC - 2SL - MC

Adjustable Metal Bracket. for use with Fixed Metal Fixed Metal Mouting Clip. Fixture with Mounting Clip (one bracket per clip). 30° adjustability. SLC Lens snaps into clip. Allow 1 per 12" Raises fixture 3/8" (9.52mm). Bracket allows repeated an- (min. 2 per fixture). See page 24. gle adjustments, and easier angle adjustments in hard-toreach areas like ceiling coves. See page 25.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 15

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W083

2SL Medium Square Extrusion - Lensed IP54 | Square extrusion for linear lighting applications. Dry or damp locations. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ ft, 4.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI), 2545 LED Board (366 lm/ft, 5.5 w/ft, 87 CRI) for narrowest beam angles, or Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI). Standard color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of Clear Acrylic lens (standard), focusing lenses L1 (18°), L2 (22°- 31°) , L3 (30°- 42°) or Lens 4 (78° - 82°), or 3 Opal diffusion lenses.

94°

(Beam Angle based on 2SL fixture with Clear Acrylic lens)

(Photometrics vary based on CCT; see chart on pages 10 & 11 for output conversion and other data specific to your fixture).

ELL- 2SL - ____________ - ________ - _________ - _________ - __________ - ____________ - ____________ CCT

LED

Lens Options 3

Finish

173 lm/ft, 2.7 w/ft, 1118 87 CRI

2000°K 1

AL Silver Anodized

PG Clear Acrylic

2400°K 2

366 lm/ft, 5.5w/ft, 87 CRI

BL Black Anodized

L1 Lens 1 (18°)

2700°K

429 lm/ft, 3.5 w/ft, 2640 85 CRI

3000°K

L3 Lens 3 (30° - 42°)

3500°K

L4 Lens 4 (78° - 82°)

443 lm/ft, 4.5w/ft, 92+ CRI

4000°K

OP1 Opal 1, Frosted

4500°K

OP2 Opal 2, Medium

516 lm/ft, 4.5w/ft, 4645 85 CRI

5000°K

OP3 Opal 3, Heavy

2545

3645

5163

548 lm/ft, 6.6w/ft, 87 CRI

1 2

Listings & Options

C Custom (see page 23)

L2 Lens 2 (18° - 31°)

C Custom

2640 & 4645 Boards Only Not Available for 3645 Board

Wire Exit WE1 Default

Fixture Length Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm)

See page 13 for more information on L1, L, L3 & L4 optical lenses.

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

MAG

Magnetic Mount

FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

Fixture Accessories ELL - AC - 2SL - MC

ELL - AC - 2SL - AMC

ELL - AC - S123 - AB

page 16 Fixed Metal Mouting Clip. Fixture extrusion snaps into clip. Allow 1 per 12" (min. 2 per fixture). See page 24.

Adjustable Metal Mouting Clip Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 12" (min. 2 per fixture). See page 24.

Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip). 30° adjustability. Raises fixture 3/8" (9.52mm). Bracket allows repeated angle adjustments, and easier angle adjustments in hard-to-reach areas like ceiling coves. See page 25.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W033

3SL Large Square Extrusion - Lensed In 3SL extrusion with Clear Acrylic lens, LEDs are placed on internal riser for maximum light output.

IP54 | Large square extrusion for linear lighting applications, including Direct View Accents. Dry or damp locations. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), or High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI). Also available with Dual LED Boards as 2680 (2 x 2640 LED Boards), 3690 (2 x 3645 LED Boards) or 4690 (2 x 4645 LED Boards). Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of Clear Acrylic lens (standard) or 3 Opal diffusion lenses.

In 3SL extrusion with Opal Acrylic lens, LEDs are placed deep in extrusion for full diffusion.

2680, 3690 and 4690 configurations can be specified with 2 different color temperatures (1 per board) and separate power leads per board, allowing for independent control and variable color temperature mixing. See page 85 for dimming controls. (Photometrics vary based on CCT; see chart on pages 10 & 11 for conversion and other data specific to your fixture).

ELL- 3SL - __________ - ________ - _________ - _________ - __________ - ____________ - __________ CCT

LED

Finish

Lens Options

1118 173 lm/ft, 2.7 w/ft, 87 CRI

2000°K 1

AL Silver Anodized

PG Clear Acrylic

2640 429 lm/ft, 3.5 w/ft, 85 CRI

2400°K 2

BL Black Anodized

OP1 Opal 1, Frosted

27 3645 443 lm/ft, 4.5 w/ft,+92 CRI 30 4645 516 lm/ft, 4.5 w/ft, 85 CRI 35 2680 666 lm/ft, 7.0 w/ft, 85 CRI 40 3690 729 lm/ft, 9.0 w/ft, +90 CRI 45 4690 774 lm/ft, 9.0 w/ft, 85 CRI 50 1 2

2700°K

C Custom

3000°K

OP2 Opal 2, Medium 3

Wire Exit C Custom (see page 23)

OP3 Opal 3, Heavy 3

3500°K

4000°K 4500°K 5000°K

Will provide full diffusion

Listings & Options

WE1 Default

Fixture Length

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

MAG

Magnetic Mount

Use Code from Chart on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm)

2640, 4645, 2680 & 4690 Boards Only Not Available for 3645 or 3690 Boards

When specifying 2680, 3690 or 4690 LEDs with two CCTs, please specify a CCT for each row, i.e. “ELL - 3SL - 2680 - 27/40 - etc." for fixture with 2700° and 4000° LEDs.

Fixture Accessories - More Information on Rough-in Kit on Page 28 ELL - AC - 3SL - MC

ELL - AC - 3SL - AMC

ELL - AC - S123 - AB

ELL - AC - 3SL - WCR - AL

page 17 Fixed Metal Mounting Clip. Fixture extrusion snaps into clip. Allow 1 per 12" (min. 2 per fixture). See page 24.

Adjustable Metal Mounting Clip. Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 12" (min. 2 per fixture). See page 24.

Wall / Ceiling Mouting Rough-in; Specify length to match fixture length. 8-32 flat head screw allows height adjustment for flush installation. (Not walk-over or drive-over rated). See page 28.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W093

4SL Medium Square Tall Extrusion - Lensed IP54 | Square extrusion with extra depth capable of full diffusion of LED diodes. Use decoratively for a slim (9/32") visible line of diffused light, or light up polished surfaces without reflected diodes. Dry or damp locations. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), or High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI). Standard color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of 3 Opal diffusion lenses. Opal 2 (Medium) or Opal 3 (Heavy) required for full diffusion. (Photometrics vary based on CCT; see chart on pages 10 & 11 for conversion and other data specific to your fixture).

ELL- 4SL - __________ - _________ - _________ - __________ - __________ - __________ - __________ CCT

LED

Finish

Lens Options

1118 173 lm/ft, 2.7 w/ft, 87 CRI

2000°K 1

AL Silver Anodized

OP1 Opal 1, Frosted

2640 429 lm/ft, 3.5 w/ft, 85 CRI

2400°K 2

BL Black Anodized

OP2 Opal 2, Medium 3

3645 443 lm/ft, 4.5w/ft, 92+ CRI

2700°K

4645 516 lm/ft, 4.5w/ft, 85 CRI

3000°K

3500°K

1 2

4000°K

4500°K

5000°K

C Custom

OP3 Opal 3, Heavy 3 3

Will provide full diffusion

Wire Exit

Listings & Options

WE1 Default C Custom (see page 23)

Fixture Length

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

MAG

Magnetic Mount

Use Code from Chart on page14 or specify Custom Length as follows: C (12.25") or C (311 mm)

2640 & 4645 Boards Only Not Available for 3645 Board

Fixture Accessories - More Information on Rough-in Kit on Page 28 ELL - AC - 4SL - MC

ELL - AC - 4SL - AMC

ELL - AC - S123 - AB

ELL - AC - 4SL - WCR - AL

2.50" [63.50mm]

0.54" [13.80mm]

2.00" [50.80mm]

page 18

Fixed Metal Mounting Clip. Fixture extrusion snaps into clip. Allow 1 per 12" (min. 2 per fixture). See page 24.

Adjustable Metal Mounting Clip Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 12" (min. 2 per fixture). See page 24.

Wall / Ceiling Mounting Rough-in; Specify length to match fixture length. 8-32 flat head screw allows height adjustment for flush installation. (Not walk-over or drive-over rated). See page 28.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W043

1QL Quarter Round Extrusion - Lensed IP54 | Quarter Round extrusion fits snugly into corners for bright, even linear lighting. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ ft, 85 CRI), 2545 LED Board (366 lm/ft, 5.5 w/ft, 87 CRI) for narrowest beam angles or Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI). Standard color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Choice of Clear Acrylic lens (standard), focusing lenses L1 (18°), L2 (22°- 31°) , L3 (30°- 42°) or Lens 4 (78° - 82°), or 3 Opal diffusion lenses.

(Beam Angle based on 1QL fixture with Clear Acrylic lens) .69” [17.53mm]

.68” [17.15mm]

94°

.95” [24.13mm]

(Photometrics vary based on CCT; see chart on page 11 for conversion and other data specific to your fixture).

ELL- 1QL - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT

Finish

Lens Options 3

1118 173 lm/ft, 2.7 w/ft, 87 CRI

2000°K 1

AL Silver Anodized

PG Clear Acrylic

2545 366 lm/ft, 5.5 w/ft, 87 CRI

2400°K 2

BL Black Anodized

L1 Lens 1 (18°)

2640 429 lm/ft, 3.5 w/ft, 8.5 CRI

2700°K

BZ Bronze

L2 Lens 2 (18° - 31°)

3645 443 lm/ft, 4.5 w/ft, 92+ CRI

3000°K

4645 516 lm/ft, 4.5 w/ft, 85 CRI

3500°K

5163 548 lm/ft, 6.6 w/ft, 87 CRI

4000°K

4500°K

5000°K

WH White

L3 Lens 3 (30° - 42°)

C Custom

2640 & 4645 Boards Only 2 Not Available for 3645 Board

L4 Lens 4 (78° - 82°)

1QL tucked behind lighting valance

Drill Hole in Flange

C Custom (see page 23) Because of 1QL’s asymmetric form, special care should be taken when specifying Wire Exit (see page 23). 4

OP1 Opal 1, Frosted OP2 Opal 2, Medium OP3 Opal 3, Heavy

Listings

Wire Exit 4

See page 13 for more information on L1, L2 L3 & L4 optical lenses. 3

1QL's self-contained mounting flange allows it to fit tightly into corners, and its 94° beam angle and wide field angle are perfect for fully lighting shelf and undercabinet spaces. Where millwork includes a lighting valance, the 1QL fixture tucks neatly inside, as shown at left. If no valance is provided, fixture can be mounted flush with front edge of shelf or cabinet. The slim, fully finished back surface ensures an attractive presentation, as shown at right and in the photos below. With black, white, silver, bronze or custom finish options, 1QL can blend in with, or accent, a wide range of cabinetry finishes. The 1QL flange is scored for easy drilling; mounting holes should be drilled approximately every 20" (minimum two holes per fixture). The 1QL fixture can also be mounted using VHB tape.

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

Fixture Length Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm) FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

1QL mounted on shelf edge

page 19 When visible, the slim1QL fixture adds an attractive accent to cabinetry

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W103

1R Small Round Extrusion - no Lens IP20 | Round extrusion for linear lighting applications. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI) or Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI). Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. No lens. Additional mounting options on page 30.

116°

(Photometrics vary based on CCT; see chart on pages 10 & 11 for output conversion and other data specific to your fixture).

ELL- 1R - _________ - _________ - _________ - _________ - __________ - __________ - _____________ CCT

LED

Finish

1118

173 lm/ft, 2.7 w/ft, 87 CRI

2000°K 1

AL Silver Anodized

2400°K 2

BL Black Anodized

2640

429 lm/ft, 3.5 w/ft, 85 CRI

24 27

2700°K

BZ Bronze

3000°K

3500°K

443 lm/ft, 4.5w/ft, 3645 92+ CRI 4645

516 lm/ft, 4.5 w/ft, 85 CRI

4000°K

4500°K

5163

548 lm/ft, 6.6 w/ft, 87 CRI

5000°K

1 2

Lens Options

Listings & Options 3

Wire Exit

NL No Lens

WE1 Default C Custom (see page 23)

Fixture Length

WH White C Custom

2640 & 4645 Boards Only Not Available for 3645 Board

ETL

ETL Listed

UL Listed

CE Marked (RoHS)

Inside Mount End Caps 3 (see page 27)

Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm)

EM8

FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

8mm End Mount Leg 3 (see page 30)

TM8

8mm T-Mount Leg 3 (see page 30)

CM8

8mm Corner Mount Leg 3 (see page 30)

See pages 32 & 33 for more information about specifying 2RL fixtures in Display Case configurations.

Bushing 3

3 Finish on Factory Installed Options will match specified finish; see all mounting options on pages 25-30

Basic Fixture Accessories - For Full Options, See Pages 25-30 ELL - AC - 1R -LC

ELL - AC - 1R -SALC

ELL - AC - 1R - MRC

0.73" [18.44mm]

ELL - AC - 1R - PC

page 20

0.62" [115.78mm]

Plastic Mounting Clip; extrusion rotates into clip. Extrusion sits 1/16" (1.59mm) off mounting surface. Details on page 25.

Locking Adjustable Mounting Clip; use one at each end of extrusion, alone or with Plastic Clips; 4-40 set screws lock extrusion at desired angle. Extrusion sits 1/16" (1.59mm) off mounting surface. Details on page 26.

Locking Adjustable Self-Adhesive Clip; use alone or with Plastic Clips; attaches with VHB tape; 4-40 set screws lock extrusion at desired angle. Extrusion sits 1/16" (1.59mm) off mounting surface. Details on page 26.

Metal Mounting Clip; Fixture extrusion rotates into clip. Countersunk screw-hole so fixture sits flush to mounting surface. Allows 60° rotation. Allow 1 per 12" (min. 2 per fixture); Polished Nickel Finish; See page 26.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W113

2RL Large Round Extrusion - Lensed IP54 | Round extrusion for linear lighting applications. Dry or damp locations. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI), 2545 LED Board (366 lm/ft, 5.5 w/ft, 87 CRI) for narrowest beam angles or Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI). Standard color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Choice of Clear Acrylic lens (standard), focusing lenses L1 (18°), L2 (22°- 31°) , L3 (30°42°) or Lens 4 (78° - 82°), or 3 Opal diffusion lenses. Additional mounting options on pages 30 and 31.

(Beam Angle based on 2RL fixture with Clear Acrylic lens)

94°

(Photometrics vary based on CCT; see chart on pages 10 & 11 for conversion and other data specific to your fixture).

ELL- 2RL - _______ - ________ - ________ - _________ - __________ - ____________ - _________ Finish

CCT

LED 173 lm/ft, 2.7 w/ft, 1118 87 CRI

2000°K 1

AL Silver Anodized

P G 94° Acrylic

2400°K 2

366 lm/ft, 5.5w/ft, 87 CRI

BL Black Anodized

L1 Lens 1 (18°)

2700°K

BZ Bronze

L2 Lens 2 (18° - 31°)

429 lm/ft, 3.5 w/ft, 2640 85 CRI

3000°K

3500°K

4000°K

OP1 Opal 1, Frosted

4500°K

OP2 Opal 2, Medium

5000°K

OP3 Opal 3, Heavy

2545

3645

443 lm/ft, 4.5 w/ft, 92+ CRI

4645

516 lm/ft, 4.5 w/ft, 85 CRI

5163

548 lm/ft, 6.6 w/ft, 87 CRI

1 2

WH White

2640 & 4645 Boards Only Not Available for 3645 Board

WE1 Default

L3 Lens 3 (30° - 42°)

C Custom

L4 Lens 4 (78° - 82°)

Listings & Options

Wire Exit

Lens Options 3

ETL

ETL Listed

C Custom (see page 23)

UL Listed

CE Marked (RoHS)

Fixture Length

Inside Mount End Caps 4 (page 27)

EM8

8mm End Mount Leg 1 4 (page 30)

TM8

8mm T-Mount Leg 4 (page 30)

CM8

8mm Corner Mount Leg 4 (page 30)

Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm)

See page 13 for more information on L1, L2, L3 & L4 optical lenses.

FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

EM16

16mm End Mount Leg 4 (page 31)

TM16

16mm T-Mount Leg4 (page 31)

Finish on Factory Installed Options will CM16 match specified finish; see all mounting options on pages 25-31 BU

16mm Corner Mount Leg4 (page 31) Bushing 4

See pages 32 - 34 for more information about specifying 2RL fixtures in Display Case configurations. Basic Fixture Accessories - For Full Options, See Pages 25-31 ELL - AC - 2RL - LC

ELL - AC - 2RL -SALC

ELL - AC - 2RL - MRC

0.86" [21.97mm]

ELL - AC - 2RL - PC

0.76" [19.27mm]

Plastic Mounting Clip; Fixture extrusion rotates into clip. Screws to mounting surface. Raises fixture 0.13" (3.18mm). Allows 30° rotation. Allow 1 per 12" (min. 2 per fixture); See page 25.

Locking Adjustable Mounting Clip; Screws to mounting surface. Raises fixture 0.13" (3.18mm). Full rotation with locking screw. Finishes to match fixture. Allow 2 per fixture (48" max span). See page 26.

Locking Adjustable Mounting Clip with Self-Adhesive. Raises fixture 0.13" (3.18mm). Full rotation with locking screw. Finishes to match fixture. Allow 2 per fixture (48" max span). See page 26.

Metal Mounting Clip; . Fixture extrusion rotates into clip. Countersunk screw-hole so fixture sits flush to mounting surface. Allows 60° rotation. Allow 1 per 12" (min. 2 per fixture); Polished Nickel Finish; See page 26.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 21

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W133

1EL Demi-Ellipse Extrusion - Lensed IP20 | Demi-Ellipse extrusion provides a low-profile fixture with recessed LED board to minimize side-view glare. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft, 2.7 w/ ft, 87 CRI), High CRI 3645 LED Board (443 lm/ft, 4.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft, 4.5 w/ft, 85 CRI) or Pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI) Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Diffuser Film Lens.

94°

(Photometrics vary based on CCT; see chart on page 11 for conversion and other data specific to your fixture).

1EL - _________ - _________ - __________ - _________ - __________ - ____________ - __________ CCT

LED

Finish

173 lm/ft, 2.7 w/ft, 1118 87 CRI

2000°K 1

AL Silver

2400°K 2

429 lm/ft, 3.5 w/ft, 85 CRI

BL Black

2700°K

BZ Bronze

3000°K

3645

443 lm/ft, 4.5 w/ft, 92+ CRI

30 35

3500°K

4645

516 lm/ft, 4.5 w/ft, 85 CRI

4000°K

4500°K

5163

548 lm/ft, 6.6 w/ft, 87 CRI

5000°K

2640

Lens Options DF Diffuser Film

WH White C Custom

2640 & 4645 Boards Only 2 Not Available for 3645 Board 1

Wire Exit WE1 Default C Custom (see page 23)

Fixture Length Use Code from Charts on page 14 or specify Custom Length as follows: C (12.25") or C (311 mm)

Listings ETL

ETL Listed

UL Listed

CE Marked (RoHS)

FEC

Flange End Cap (see page 25)

FIXTURE LENGTHS DIFFER FOR 5163 LED BOARD!

Fixture Accessories ELL - AC - 1EL - MC

0.433" [11.0mm] Flange End Cap Option is factory installed. Flanges add 0.866" [22.0mm] to overall fixture length.

page 22

The low-profile 1EL fixture provides ideal task lighting for desks and work areas.

Fixed Metal Mounting Clip; Fixture snaps into clip. Countersunk screw-holes allow fixture to sit flush to mounting surface. Allow 1 clip per 12" (min. 2 per fixture). See page 25.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X043

Wire Exits & Daisy Chained Fixtures WR3

Square Extrusions

WR1

WE3

1S* 2SL 3SL 4SL 5SLW* LR LRDC MLR*

WL3

*(1S, 5SLW & MLR extrusions available with WE1 or WE3 options ONLY.)

WB3

WL1

WE1 (Default)

WB1

(LR = LightRun, LRDC = LightRun Dual Color, MLR = Mini LightRun)

Round Extrusions

WE3

1R 2RL

WE1 (Default)

WB3 WB1 WR3

WR1

Quarter Round Extrusion

WE3 (Right)

WE1 (Left)

1QL

WB3 WB1

WE3

Demi-Ellipse Extrusion WE1 (Default)

1EL

WB3 WB1

To Specify “Daisy-Chained“ Configurations: In certain applications, “Daisy-Chained“ configurations provide the best wiring solution. Specify the following “Daisy-Chain Termination" Modification for EVERY fixture needing to be daisy-chained; refer to the correct diagrams above for available Wire Exit options: See example below. Daisy-Chained lengths CANNOT exceed a TOTAL of 44 watts per run! 5SLW fixtures cannot be daisy-chained. DAISY-CHAIN TERMINATION

CAT. NO.

Specify two wire exits, two wire lengths, and two connectors for each fixture to be daisy-chained. Sample specification: ELL - AC - DCT - WE1 - 2" - NC / WE3 - 2" - NC No Connector

LEFT SIDE -

ELL - AC - DCT WE1 WR1 WL1 WB1

Wire Length in Inches

/ NC MC FC

RIGHT SIDE WE3 WR3 WL3 WB3

Wire Length in Inches

No Connector

MC Male Connector

WE 1 WE 3

No Connector

NC MC FC

Female Connector

2" Length

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 23

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X063

Mounting Options All EssentialLEDs® linear products are ETL listed for both surface and recessed mount applications. and must be specified on product configurator. FIXED METAL CLIP - 1S

SPECIFICATIONS Dimensions: Material:

FIXED METAL CLIP - 2SL, 1S*

0.34" x 0.42" [8.7mm x 10.66mm] 301 Stainless Steel

SPECIFICATIONS Dimensions: 0.43" x 0.59" [10.9mm x 15.0mm] Material: 301 Stainless Steel *When 1S is specified with Slide-On Lens

FIXED METAL CLIP - 4SL

SPECIFICATIONS Dimensions: 0.98" x 0.63" [24.99mm x 16.20mm] Material 301 Stainless Steel :

FIXED METAL CLIP - 3SL

SPECIFICATIONS Dimensions: 1.12" x 1.09" [28.4mm x 27.7mm] Material: 301 Stainless Steel

ADJUSTABLE METAL CLIP - 1S

SPECIFICATIONS Dimensions: Material:

ADJUSTABLE METAL CLIP - 2SL, 1S*

0.33" x 0.71" [8.51mm x 18.03mm] 301 Stainless Steel

SPECIFICATIONS Dimensions: Material:

ADJUSTABLE METAL CLIP - 4SL

0.43" x 0.84" [10.87mm x 21.39mm] 301 Stainless Steel *When 1S is specified with Slide-On Lens

SPECIFICATIONS Dimensions: 0.98" x 0.94" [24.99mm x 23.92mm] Material 301 Stainless Steel :

ADJUSTABLE METAL CLIP - 3SL

SPECIFICATIONS

n Options marked by red dots are factory-installed

CAT. NO.

ELL - AC - 1S - MC

Description: Fixed Metal Clip for mounting small (1S) square extrusion with No Lens. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL- AC - 2SL - MC Description: Fixed Metal Clip for mounting medium (2SL) square extrusion and small (1S) square extrusion with SLC lens. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO.

ELL - AC - 4SL - MC

Description: Fixed Metal Clip for mounting extra depth (4SL) square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC - 3SL - MC Description: Fixed Metal Clip for mounting large (3SL) square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC-1S - AMC Description: Adjustable Metal Clip for mounting small (1S) square extrusion with No Lens. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC - 2SL - AMC Description: Adjustable Metal Clip for mounting medium (2SL) square extrusion and small (1S) square extrusion with SLC lens. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC - 4SL - AMC Description: Adjustable Metal Clip for mounting extra depth (4SL) square extrusion. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC -3SL - AMC

page 24 Dimensions: Material:

1.12" x 1.31" [28.52mm x 33.22mm] 301 Stainless Steel

Description: Adjustable Metal Clip for mounting large (3SL) square extrusion. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 12" of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X063

adjustable metal clips for 1 s , 2 sl , 3 sl and 4 sl extrusions allow fixtures to be attached in a variety of mounting surface positions and allow one - time adjustment to desired angle . see examples below . first press fixture into clips , then gently bend clips to desired angle . not intended for repeated adjustments .

ADJUSTABLE BRACKET - 1S, 2SL, 3SL, 4SL

SPECIFICATIONS

Dimensions: 1.31" x 0.51" x 0.50" [33.32mm x 12.95mm x 12.7mm]

Material: 304 Stainless Steel

1EL MOUNTING CLIP

CAT. NO. ELL-AC-S 123 -AB Description: Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip, ordered separately). Allows repeated 30° angle adjustability of 1S, 2SL, 3SL or 4SL square fixtures. Screws to mounting surface with screw, provided. Raises fixture 3/8" (9.52mm) off mounting surface. Allow 1 per 12" of extrusion (min. 2 per fixture).

SPECIFICATIONS

0.22" [5.84mm]

Dimensions: 1.59" [40.36mm] x 0.22" [5.84mm] Material: Stainless Steel

SPECIFICATIONS

1EL- END CAP/FLANGE

CAT. NO. ELL - AC-1EL - MC Description: Fixed Metal Clip for mounting small (1EL) demi-ellipse extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screws provided). Fixture extrusion snaps into clip. Allow 1 per 12" of extrusion (min. 2 per fixture). CAT. NO.

ELL - AC - 1EL - FEC -

lDescription: End cap/flange for self-mounting 0.375" [9.52mm]

1.50" [38.10mm]

Dimensions: 1.50" [38.10mm] x 0.433” [11.0mm] Material: Aluminum

0.433" [11.0mm]

PLASTIC CLIP - 1R

SPECIFICATIONS

Dimensions: 0.51" x 0.58" [13.0mm x 14.72mm] Material: ABS Plastic

PLASTIC CLIP - 2RL

SPECIFICATIONS

Dimensions: 0.62" x 0.73" [15.64mm x 18.60mm] Material: ABS Plastic

AL BL BZ WH

1EL fixture. Factory installed – must be specified on product configurator (page 22). Flange on both ends adds 0.866” [22.0mm] to overall length of fixture. Screws to mounting surface with #4 screw, provided. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 1R - PC Description: Plastic Clip for mounting small (1R) round extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Raises fixture 0.13" (3.18mm). Allows 30° rotation. Allow 1 per 12" of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC- 2RL - PC Description: Plastic Clip for mounting medium (2RL) round extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Raises fixture 0.13" (3.18mm). Allows 30° rotation. Allow 1 per 12" of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 25

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X063

All EssentialLEDs® linear products are ETL listed for both surface and recessed mount applications. installed and must be specified on fixture configurator. LOCKING CLIP -1R

SPECIFICATIONS Dimensions: 0.87" x 0.73" [22.13mm x Material: 18.44mm] Finish: Aluminum Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

LOCKING CLIP -2RL

SPECIFICATIONS Dimensions: 1.01" x 0.86" [25.62mm x Material: 21.979mm] Finish: Aluminum Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

0.73" [18.44mm]

SELF-ADHESIVE LOCKING CLIP

0.62" [15.78mm]

0.86" [21.97mm]

SELF-ADHESIVE LOCKING CLIP

0.76" [19.27mm]

METAL ROUND CLIP - 1R

SPECIFICATIONS Dimensions: 0.87" x 0.73" [22.13mm x 18.44mm] Material: Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS Dimensions: 1.01" x 0.86" [25.62mm x Material: 21.979mm] Finish: Aluminum Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS Dimensions: 0.47" x 0.48" [12.02mm x 12.11mm] Material: 301 Stainless Steel Finish Polished Nickel

METAL ROUND CLIP - 2RL

page 26

SPECIFICATIONS Dimensions: 0.60" x 0.61" [15.33mm x 15.50mm] Material: 301 Stainless Steel Finish: Polished Nickel

n Options marked by red dots are factory-

CAT. NO. ELL - AC- 1R - LC-

AL Description: Locking Adjustable Clip for mounting small (1R) round BL BZ extrusion. Screws to mounting surface with screw, provided. Raises WH fixture 0.13" (3.18mm). Full rotation with locking set screw. Allow 2 per fixture (1 at each end) with 48" [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 2RL - LC-

AL Description: Locking Adjustable Clip for mounting medium (2RL) BL round extrusion. Screws to mounting surface with screw, provided. BZ Raises fixture 0.13" (3.18mm). Full rotation with locking set screw. WH Allow 2 per fixture (1 at each end) with 48" [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 1R - SALC -

AL Description: Locking Adjustable Clip for mounting small (1R) round BL extrusion. VHB tape provides self-adhesive attachment to any sur- BZ face. Raises fixture 0.13" (3.18mm). Full rotation with locking set WH screw. Allow 2 per fixture (1 at each end) with 48" [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 2RL - SALC AL Description: Locking Adjustable Clip for mounting medium (2RL) BL round extrusion. VHB tape provides self-adhesive attachment to any BZ WH surface. Raises fixture 0.13" (3.18mm). Full rotation with locking set screw. Allow 2 per fixture (1 at each end) with 48" [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 1R - MRC Description: Cylindrical Metal Clip for mounting small (1R) round extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screw provided). Fixture extrusion snaps into clip. Allows 60° rotation. Allow 1 per 20" of extrusion (min. 2 per fixture). CAT. NO.

ELL- AC - 2RL - MRC

Description: Cylindrical Metal Clip for mounting medium (2RL) round extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screw provided). Fixture extrusion snaps into clip. Allows 60° rotation. Allow 1 per 20" of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X063

BUSHING - 1 R

SPECIFICATIONS Dimensions: 1.50" x 1.00" [38.10mm x 25.40mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated Cutout ∅ 13/16" [21mm]

BUSHING - 2RL

SPECIFICATIONS

CAT. NO.

ELL - AC - 1RL - BU -

lDescription: Threaded Bushing with nut for mounting BL

small (1R) round extrusion perpendicular to the mounting BZ surface. Factory installed – must be specified on product WH configurator (page 20). Requires only 1 per extrusion for vertical mount with 20" [508mm] max height. 3/4-16 thread size. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 13/16” [21mm] CAT. NO.

ELL - AC - 2RL - BU AL

Dimensions: 1.50" x 1.13" [38.10mm x 28.58mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated Cutout ∅: 15/16" [24mm] INSIDE MOUNT END CAP - 1 R

SPECIFICATIONS

lDescription: Threaded Bushing with nut for mounting BL

medium (2RL) round extrusion perpendicular to the mount- BZ ing surface. Factory installed – must be specified on product WH configurator (page 21). Requires only 1 per extrusion for vertical mount with 20" [508mm] max height. 7/8-20 thread size. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 15/16” [24mm] CAT. NO. ELL - AC - 1 R - IM AL

Dimensions: 0.50" x 0.69" [12.70mm x 17.44mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

INSIDE MOUNT END CAP - 2 RL

SPECIFICATIONS Dimensions: 0.63" x 0.79" [15.88mm x 20.14mm]

6061 Aluminum Material: Silver (AL), Black (BL) Anodized; Finish: Bronze (BZ) or White (WH) Powder Coated ADJUSTABLE INSIDE MOUNT RING - 1 R Dimensions: Material: Thickness: Finish:

Inside Dim. 0.51"[13.08mm] for 1R Extrusion

ADJUSTABLE INSIDE MOUNT RING - 2 RL

Inside Dim. 0.64"[16.26mm] for 2RL Extrusion

SPECIFICATIONS 1.25" [31.75mm] 6061 Aluminum 0.19" [4.83mm] Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS

Dimensions: Material: Thickness: Finish:

1.25" [31.75] 6061 Aluminum 0.19" [4.83mm] Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

lDescription: : Inside Mount End Cap for mounting small BL

(1R) round extrusion to insides of cabinetry (using #4 screws, BZ provided). Factory installed – must be specified on product con- WH figurator (page 20). Requires 2 per fixture with 48" [1279.2mm] max span between. Tab extends 0.19" [4.74mm] beyond fixture diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 2 RL - IM -

lDescription: Inside Mount End Cap for mounting me- BL

dium (2RL) round extrusion to insides of cabinetry (using #4 BZ screws, provided). Factory installed – must be specified on WH product configurator (page 21). Requires 2 per fixture with 48" [1279.2mm] max span between. Tab extends 0.17" [4.26mm] beyond fixture diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO.

ELL - AC - 1 R - IMR -

AL Description: Adjustable Inside Mount Ring for mounting BL small (1R) round extrusion to insides of cabinetry (using #6 FH BZ WH screws, provided). Allows 60° rotation. Requires 2 per fixture with 48" [1279.2mm] max span between. 1.25" [31.75mm] diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO.

ELL - AC - 2 RL - IMR -

AL Description: Adjustable Inside Mount Ring for mounting BL medium (2RL) round extrusion to insides of cabinetry (us- BZ WH ing #6 FH screws, provided). Allows 60° rotation. Requires 2 per fixture with 48" [1279.2mm] max span between. 1.25" [31.75mm] diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 27

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X073

Special Mounting Options 3Sl & 4SL 3SL WALL/CEILING ROUGH-IN KIT

SPECIFICATIONS

CAT. NO. ELL - AC - 3SL - WCR - AL

1.02" [25.91mm]

2.50" [63.50mm]

Description: : Rough-in extrusion for mounting large (3SL) square extrusion in wall or ceiling applications. Specify length to match fixDimensions: 2.50" x 2.53" [63.50mm x 64.14mm] ture length. 8-32 flat head screw allows height adjustment of fixture Material: Anodized Aluminum within rough-in for an installation flush to the finished wall or ceiling surface. Rough-in includes all necessary fixture mounting clips. Weight: 1.47 lbs/ft [2.18 kg/m] (Note: System is not currently rated for use in walk-over or drive-over applications) 2.53" [64.14mm]

4SL WALL/CEILING ROUGH-IN KIT

SPECIFICATIONS

CAT. NO. ELL - AC - 4SL - WCR - AL

0.54" [13.80mm]

2.50" [63.50mm]

Description: Rough-in extrusion for mounting extra depth (4SL) square extrusion in wall or ceiling applications. Specify length to match fixture length. 8-32 flat head screw allows height adjustment Dimensions: 2.50’" x 2.00" [63.50mm x 50.80mm] of fixture within rough-in for an installation flush to the finished wall Material: Anodized Aluminum or ceiling surface. Rough-in includes all necessary fixture mounting clips. Weight: 1.03 lbs/ft [1.53 kg/m] (Note: System is not currently rated for use in walk-over or drive-over applications)

2.00" [50.80mm]

Two applications using Wall/Ceiling Rough-In Kits: 3SL in ceiling installation, 3SL & 4SL “vanity" lighting in millwork installation

page 28

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X073

Special Mounting Options 3Sl & 4SL Wall/Ceiling Rough-in Kits enable clean, flush installation of 3SL & 4SL extrusions into wall and ceiling surfaces, primarily for use with typical drywall surfaces and stud wall construction. Rough-in Kit is recommended for use in “direct view" applications where Opal lensing fully diffuses the LEDs and creates a solid “line of light". Not suitable for floor or ground installation. The diagrams and photos below provide a brief overview of how Wall/Ceiling Rough-in Kits are installed.

1. Drill Extrusion:

Drill mounting holes along each side of the extrusion approximately every 16" to 24", or to conform to the structural elements in your application. For plenum installations, wiring chaseway area of extrusion can be drilled into for connection of electrical conduit.

Connector for Electrical Conduit

Wiring Chaseway

2. Position Mounting Clip Assembies:

The Mounting Clip Assemblies hold the fixtures in place and should be spaced 16" OC, with a minimum 2 per fixture. Use set screws to lock clip assemblies in position.

Set Screws

3. Set Fixture Height:

Adjust screw head to exactly 1" below top edge of extrusion

The #8 flat head Philips screw in each Mounting Clip Assembly sets the depth of the fixture in the mounting extrusion. The head of each screw should be adjusted to exactly 1" below top edge of extrusion. 1"

Wood or metal stud, or blocking provided by others

4. Install Mounting Kit Extrusion:

Attach mounting extrusion to structural stud or blocking. Extrusion is designed for drywall to be “mudded up" to the extrusion edge, for a clean, flush finished installation.

Wiring Chaseway

2.50" [63.50mm] Between extrusion mounting surface and finished drywall surface

Screw Mounting Kit Extrusion to structure

Top edge of Mounting Kit Extrusion should align with finished drywall surface; mud up to edge for clean finish

5. Install Fixtures:

Insert fixtures in mounting clip assemblies; run wiring behind fixture in chaseway provided. If desired, slight gap between fixture and extrusion can be sealed using clear silicone sealant.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 29

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X083

Special Mounting Options - 8mm Upright (1R & 2RL) Display Case Applications: 1R and 2RL fixtures can be combined with 8mm End-Mount, T-Mount or Corner Mount Upright Legs to create a highly-customized display fixture system. See diagrams and details on pages 32 & 33 for more information.

n Options marked by red dots are factory-installed and must be specified on product configurator.

8MM END MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC -

8MM T -MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC -

lDescription: T-Mount Leg for Dimensions: 8mm leg; 0.63" (15.88mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

8MM CORNER MOUNT LEG

SPECIFICATIONS

- TM8 -

6 12 18

1R 2RL

AL BL BZ WH

connecting two1R round extrusions in a straight line. Multiple T-Mount Legs can be used to create extended display case fixturing. Factory Installed – must be specified on product configurator (page 20 or 21). T-Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1" to 18" [25.4mm to 457.2mm]. Max recommended span between uprights is 48" [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 3/4” [19mm] CAT. NO. ELL - AC -

- CM8 -

AL BL connecting two 1R round extrusions at BZ a 90° angle. Multiple Corner Mount Legs can be used to WH create extended display case fixturing in unique shapes. Factory Installed – must be specified on product configurator (page 20 or 21). Corner Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1" to 18" [25.4mm to 457.2mm]. Max recommended span between uprights is 48" [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 3/4” [19mm]

lDescription: : Corner Mount Leg for Dimensions: 8mm leg; 0.63" (15.88mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

6 12 18

AL BL 1R round extrusion. Factory Installed – BZ WH must be specified on product configurator (page 20 or 21). End Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1" to 18" [25.4mm to 457.2mm]. Max recommended span between uprights is 48" [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 3/4” [19mm]

lDescription: End Mount Leg for Dimensions: 8mm leg ; 0.63" (15.88mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

- EM8 -

1R 2RL

6 12 18

page 30

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X083

Special Mounting Options - 16mm Upright (2RL ONLY) 2RL fixtures can be combined with 16mm End-Mount, T-Mount or Corner Mount Upright Legs to create a highly-customized display fixture system. 16mm Upright Legs will provide a continuous .63" [15.9mm] leg to match the diameter of the 2RL fixture. 16mm Upright Legs can be composed of empty or illuminated segments. See diagrams and details on page 34 for more information. Contact factory for more information on specifying illuminated leg segments. n Options marked by red dots are factory-installed and must be specified on product configurator.

16MM END MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC - 2RL - EM16 -

AL BL extrusion. Leg segments may be configured with empty BZ or illuminated extrusion (Factory Installed – must be WH specified on product configurator (page 21). 16mm End Mount Leg includes 6”, 12” or 18” upright and threaded bushing. Empty legs are adjustable and field cuttable to achieve fixture height of 1”to 18”[25.4mm to 457.2mm]. Illuminated legs are adjustable but NOT field cuttable. Max recommended span between uprights is 48” [1279.2mm] Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 15/16” [24mm]

lDescription: 16mm End Mount Leg/Connector for 2RL Dimensions: 0.63" (15.9mm) diameter extrusion leg Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

16MM T -MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC - 2RL - TM16 -

16MM CORNER MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC - 2RL - CM16 -

AL BL 2RL extrusion. Leg segments may be configured with BZ empty or illuminated extrusion (Factory Installed – must be WH specified on product configurator (page 21). 16mm Corner Mount Leg includes 6”, 12” or 18” upright and threaded bushing. Empty legs are adjustable and field cuttable to achieve fixture height of 1” to 18” [25.4mm to 457.2mm]. Illuminated legs are adjustable but NOT field cuttable. Max recommended span between uprights is 48” [1279.2mm] Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 15/16” [24mm]

lDescription: 16mm Corner Mount Leg/Connector for Dimensions: 0.63" (15.9mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

6 12 18

AL BL extrusion. Leg segments may be configured with empty BZ or illuminated extrusion (Factory Installed – must be WH specified on product configurator (page 21). 16mm T Mount Leg includes 6”, 12”or 18”upright and threaded bushing. Empty legs are adjustable and field cuttable to achieve fixture height of 1” to 18” [25.4mm to 457.2mm]. Illuminated legs are adjustable but NOT field cuttable. Max recommended span between uprights is 48” [1279.2mm] Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. Cutout ∅ 15/16” [24mm]

lDescription: 16mm T Mount Leg/Connector for 2RL Dimensions: 0.63" (15.9mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

6 12 18

page 31

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X083

Special Mounting Options - 8mm Uprights (Fig. A) below details the dimensions to be considered when designing a basic two-legged fixture using 8mm Upright Legs. For more complex configurations that include T-Mount and Corner Mount Leg components (Fig. B) please visit the website and download the “8mm Free-Standing Display Worksheet” on the 1R or 2RL Downloads tab. Glass showcases can also be configured using a single leg support combined with Self-Adhesive Locking Clips (page 26) which adhere directly to the glass surface (Fig. C).

Fig. A: Typical two-legged configuration.

EXTRUSION LENGTH PLUS 2.62" (66.5mm) EQUALS OVERALL WIDTH OF FIXTURE 0.81" (20.6mm)

ALLOW MINIMUM 0.5"(12.7MM) ON EACH SIDE OF FIXTURE TO ACCOMODATE MOUNTING COVER PLATE

ELBOW JOINTS ADD 1.62" (41.1mm) TO OVERALL WIDTH 0.81" (20.6mm) EACH SIDE

0.5" (12.7mm)

0.81"

(20.6mm)

0.5" (12.7mm)

LEGS ARE ADJUSTABLE & FIELD CUTTABLE TO ACHIEVE FIXTURE HEIGHT OF 1" TO 18" (25.4mm to 457.2mm)

MOUNTING COVER PLATE

1.25" (31.8mm)

1.55" (39.4mm)

0.71" (18mm)

Fig. B: For laying out fixture configurations with three or more legs, please use the “8mm

Free-Standing Display Worksheet” which can be found online on the 1R or 2RL Downloads tab.

Fig. C: Single-legged configurations can be attached to glass surfaces using Self-Adhesive Locking Clip (pg. 26). One clip every 12"-16". GLASS SURFACE

page 32

Center to Center

ELL - AC - XX - SALC

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X083

Cutout Dimension for 8mm Bushings

1. Installation with Underside Access:

3/4" [19.05mm] A. Install Bushing and Secure with Nut Provided

B. Feed Wire Through Bushing

(3/4” ANSI Size Drill Bit)

Height Adjustment

2. Installation with Topside Access Only Use Allen Wrench and Set Screw in Bushing to Adjust and Secure Height of 8mm Uprights

A. Use Bushing as Template to Mark and Drill 4 Holes

B. Use Screws Provided to Attach Bushing to Top Surface

C. Feed Wire Through Bushing

Combine 1R and 2RL fixtures with 8mm End Mount, T-Mount or Corner Mount Legs to create unlimited custom display configurations.

page 33

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X083

Special Mounting Options - 16mm Uprights (2RL ONLY) 2RL fixtures can be configured with 16mm End Mount, T-Mount or Corner Mount Upright Legs to provide a continuous .63” [15.88mm] leg to match the diameter of the 2RL fixture. Upright Legs can be composed of empty or illuminated fixture segments. (Fig. A) below details the dimensions to be considered when designing a basic two-legged fixture using 16mm Upright Legs. For more complex configurations that include T-Mount and Corner Mount Leg components, please visit the website and download the “16mm Free-Standing Display Worksheet” on the 2RL Downloads tab.

EXTRUSION LENGTH PLUS 2.12" (53.8mm) EQUALS OVERALL WIDTH OF FIXTURE 0.25" (6.35mm) 1.0" (25.65mm)

ALLOW MINIMUM 0.25"(6.35 mm) ON EACH SIDE OF FIXTURE TO ACCOMODATE BUSHING COLLAR

ELBOW JOINTS ADD 1.62" (41.1mm) TO OVERALL WIDTH 0.81" (20.6 mm) EACH SIDE

0.25" (6.35mm) 1.0" (25.65mm)

LEGS ARE ADJUSTABLE & FIELD CUTTABLE TO ACHIEVE FIXTURE HEIGHT OF 1" TO 30" (25.4 mm to 762 mm)

BUSHING

Fig. A

Typical two-legged configuration 16mm legs can be configured using empty extrusion that matches the diameter and finish of the 2RL fixture, or can be configured using illuminated segments (contact VLT factory for more information); empty and illuminated legs are adjustable to achieve fixture height of 1” to 18”; empty extrusion is field cuttable

1.50" (38.10mm)

0.88" (22.30mm)

1.13" (28.58mm)

Cutout Dimension for 16mm Bushing ∅ .937” (24mm)

(15/16” ANSI Size Drill Bit)

Height Adjustment

page 34

Use Allen Wrench and Set Screw in Bushing Collar to Adjust and Secure Height of 16mm Uprights

2RL fixture with 16mm illuminated legs. Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X093

Constant Voltage Wiring Accessories Connectors

Female

Male

Fixtures come with 96" [2.44m] of 20 AWG wire and male Tyco Mate ‘n Lock connector as standard; customization available; connector can be removed for hard wired installation. Starter, splitter and interconnect wiring accessories available for easy installation; see below.

0.55" L x 0.28" W x 0.35"H [14mm x 7mm x 8.8mm]

0.67" L x 0.28" W x 0.19"H [17mm x 7mm x 5mm]

Starter Cables have bare wires on one end to connect directly to LED driver terminals or to wires via wire nuts, and one (1) female connector for connection to a linear fixture, splitter accessory, or interconnect wire. Splitters connect multiple fixtures to a single driver; 2- way, 4-way or 8-way options; one (1) male connector, multiple female connectors. Interconnect Wires extend wiring between driver and fixture or between splitter accessory and fixture; (1) one female connector, (1) one male connector. All Wiring Accessories are ETL Listed (UL 2108), when used as part of an EssentialLEDs® system. 2 FT or 8 FT STARTER CABLE

SPECIFICATIONS

INTERCONNECT WIRES

ELL - AC - CV - SC -

Description: Starter Cable with bare wires on one end and a female connector on the other. Bare wires connect to LED driver terminals or to other wires (via wire nuts, not included). Female connector is for direct connection to an EssentialLEDs® Linear fixture, a Splitter or an Interconnect Wire. 20 AWG wire. Available in 2’ or 8’ lengths.

2- , 4- or 8 - WAY SPLITTER

8.00” (203.20mm)

CAT. NO.

SPECIFICATIONS

x2 x4 x8

CAT. NO. ELL - AC - CV - SPL -

Description: Wire Splitter with 1 male connector and 2, 4 or 8 multiple female connectors. Allows for easy connection of multiple fixtures to a single LED Driver. Male connector is for connection to a Starter Cable, another Splitter or an Interconnect Wire. Female connectors are for direct connections to an EssentialLEDs® Linear fixtures, other Splitters or Interconnect Wires. Overall length is 8" with each female connector being 3" long. 20 AWG wire.

SPECIFICATIONS

2 8

2 4 8

CAT. NO. ELL - AC - CV - ICW -

Description: Interconnect Wire with 1 male and 1 female connector for extending connections between LED Drivers and EssentialLEDs® Linear fixtures or between LED Drivers and Wire Splitters. Also for use in “daisy chain" connections between fixtures (see “Daisy-Chain Termination" on page 23). 20 AWG wire. Available in 2’, 4’, 5’ and 10’ lengths.

2 4 5 10

page 35

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W143

Interior Flexible Fundamentals

EFlex Flexible LEDs put all the great light quality of EssentialLEDs® into a bendable format that’s perfect for curved surfaces like coves and columns. The self-adhesive backing makes EFlex a quick and easy way to add lighting accents to a variety of interior locations. Five color temperatures that are a perfect match to our other linear and panel products. EFlex Flexible LEDs are perfect for:

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1122 LED Board available in 2700K, 3000K, 3500K, 4000K, 4500K & 5000K. LED Board 1122 LUMEN OUTPUT

190 lm/ft [623 lm/m]

POWER CONSUMPTION

2.2w/ft. [7.2w/m]

COUPON LENGTH

3.44" [87.5mm] 87

CRI CCT OPTIONS

ALL

APPLIED LED

Nichia 157b 108 lm/w

LED EFFICACY*

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

ELECTRICAL

LENGTHS FINISH LENSING

All photometrics based on 3500K CCT

• Under Counters & Toe Kicks • Accents for Coves & Niches • Uplights Above Cabinetry • Halo Effects Behind Headboards, Mirrors & Entertainment Centers

None

White silk screen

EFlex Flexible LEDs use .10w LEDs are only 2.2w per linear foot, and can be purchased as either pre-cut/wired lengths or by the spool. EFlex can be cut in the field every 3.44" [87.5mm]. 87 CRI.

0.393" [10.0mm] wide x 0.050" [1.25mm] high and up to 22.96’ [7000mm]; field cuttable in 3.44" [87.5mm] coupons Driver Type: Constant Voltage, Class 2 UL recognized (ETL Listed as a system) Input Voltage: 24v DC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver or via 0-10 volt with electronic driver Feed Wire: Pre-cut lengths: 96" [2.44m] of 20 AWG Wire [1.02mm2] with Male Connector or Full Spool with single 12"[305mm] Lead of 20 AWG Wire [1.02mm²] Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 50° C]

EFlex is dimmable using either Magnetic or Electronic dimmable drivers, or with an electronic driver and 0-10v module. Visit the VLT website for application photos and the most recent IES files.

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

3M VHB Tape, provided (UL 2108 & 8750);

MADE in USA RoHS Compliant (if specified); LM79, LM80 ; IP20

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)).

page 36 CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

5000K

.88

1.0

1.08

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W143

EFlex Flexible LEDs - Interior IP20 | Flexible LED strip for interior linear lighting applications. Dry location. Includes Nichia LEDs (190 lm/ft, 2.2 w/ft, 87 CRI) on a flexible, self-adhesive substrate. Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. Available pre-cut into 3.44" [87.5mm] “coupons", or as a field-cuttable spool of 22.96 ft [7000mm]. See page 35 for EFlex Wiring Accessories.

EFlex- __________ - __________ - __________ - __________ - __________ - __________ LED

CCT

190 lm/ft, 2.2 w/ft, 1122 87 CRI

27 2700°K

Lens Options

Wire Exit

NL No Lens

WE1 Default

30 3000°K

Listings ETL CE

35 3500°K 40 4000°K

ETL Listed CE Listed (RoHS)

Strip Length

45 4500°K

3.44" increments up to 22.9’ long [87.5mm increments up to 7000mm long]

50 5000°K

3.44" increments up to 22.9ft. long [87.5mm increments up to 7000mm long]

3.44" [87.5mm] .400" [10.16mm]

+24VDC GND

3.44" [87.5mm] +24VDC GND

+24VDC GND

.072" [1.82mm]

page 37

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W153

Exterior Flexible Fundamentals

EFlexW Flexible LEDs slips all the great light quality of EssentialLEDs® into a weatherproof silicone sheathing that’s perfect for outdoor architectural applications, especially when you need high light output from small areas & curvilinear surfaces. EFlexW is a quick and easy way to add lighting accents to a variety of exterior locations, in five color temperatures that are a perfect match to our other EssentialLEDs® products.

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1122 LED Board available in 2700K, 3000K, 3500K, 4000K, 4500K & 5000K. 1122

LED Board LUMEN OUTPUT

173 lm/ft [567 lm/m]

POWER CONSUMPTION

2.2w/ft. [7.2w/m]

COUPON LENGTH

3.44" [87.5mm] 87

CRI CCT OPTIONS

ALL

APPLIED LED

Nichia 157b 108 lm/w

LED EFFICACY*

All photometrics based on 3500K CCT

LENSING

Silicone sheathing

FINISH

White silk screen

LENGTHS

0.492" [12.5mm] wide x 0.157" [4.0mm] high and up to 22.96’ [7000mm]; end caps add .045" [1.14mm] to length of LED strip.

ELECTRICAL

Driver Type: Constant Voltage, Class 2 UL recognized (ETL Listed as a system) Input Voltage: 24v DC Dimming: Magnetic Low-Volatge Dimmer with HMLD Driver or via 0-10 volt with electronic driver Feed Wire: 4’[1219.2mm] of 20 AWG Wire [1.02mm²] with Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 50° C]

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

page 38

EFlexW Flexible LEDs are perfect for adding linear lighting accents in outdoor locations such as: • Curved Sit Walls and Planters • Patios and Outdoor Kitchens • Water Features (non-submersed)

EFlexW is dimmable using either Magnetic or Electronic dimmable drivers, or with an electronic driver and 0-10v module. Visit the VLT website for application photos and the most recent IES files.

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

MADE in USA

Silicone brackets, screwed (UL 2108 & 8750);

EFlexW Flexible LEDs are only 2.2w per linear foot, and are available in pre-cut wired and sheathed lengths. 87 CRI.

RoHS Compliant (if specified); LM79, LM80 ; IP65 (Wet Location)

CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

5000K

.88

1.0

1.08

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W153

EFlexW Flexible LEDs - Exterior IP65 | Flexible LED strip for exterior and wet location linear lighting applications. Includes Nichia LEDs (173 lm/ft, 2.2 w/ft, 87 CRI) on a flexible substrate and sealed into a weatherproof silicone sheathing. Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. Specify pre-cut “coupon" length in 3.44" [87.5mm] segments up to 22.96 ft [7000mm]. End caps add .045" [1.14mm] to each end of LED strip length. Mounts using screwed silicone brackets on 12" centers. See below for bracket information.

EFlexW - __________ - _________ - _________ - _________ - __________ - __________ LED

CCT

173 lm/ft, 2.2 w/ft, 1122 87 CRI

27 2700°K

Lens Options NL No Lens

Wire Exit WE1 Default

30 3000°K

Listings ETL CE

35 3500°K 40 4000°K

ETL Listed CE Listed (RoHS)

Strip Length

45 4500°K

3.44" increments up to 22.9’ long [87.5mm increments up to 7000mm long]

50 5000°K

3.44inincrements incrementsup upto to 22.9ft. 22.9ft long 3.44" long [87.5mm increments increments up to [87.5mm to 7004mm 7000mmlong] long]

SOFT BRACKET

SPECIFICATIONS

Dimensions: 1.095" [27.81mm] x 0.210" [5.33mm] Material: Silicone

CAT. NO. ELL-AC - EFLEXW - SB

Description: Silicone bracket straddles sheathed EFLEXW strip; screws to mounting surface on each end (screws provided by others). Recommended spacing: every 12".

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 39

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W163

Exterior Linear Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. LEDs available in 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K & 5000K; CCT options vary based on board chosen. 1118

2640

3645

4645

LUMEN OUTPUT

169 lm/ft [554 lm/m]

429 lm/ft [1407 lm/m]

443 lm/ft [1453 lm/m]

516 lm/ft [1692 lm/m]

POWER CONSUMPTION

2.7w/ft. [8.9w/m]

3.5 w/ft [11.5 w/m]

4.5w/ft. [14.8w/m]

92+

LED Board

CRI CCT OPTIONS

EXCEPT 2000K

ALL

EXCEPT 2000K, 2400K

ALL

APPLIED LED

Nichia 157b

Nichia 757d

LED EFFICACY*

108 lm/w

138 lm/w

110 lm/w

126 lm/w

BEST USED FOR

LOW OUTPUT

STANDARD

HI CRI

HI OUTPUT

LENSING FINISH

All fixtures available in silver, black, bronze or white powder coated finish; custom finishes on request

LENGTHS

Up to 72" [1830mm]; see Length & Wattage Table (page 41) for all standard length options Driver Type: Constant Voltage, Class 2 UL Recognized (ETL Listed as a system) Input Voltage: 24vDC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, or via 0-10 volt with Electronic Driver Feed Wire: 4’ [1219.2mm] of 18 AWG Wire [1.02mm2] with Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

page 40

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

94° Clear Lens or choice of three opal acrylic lenses; see page 13 for more information about lensing choices, and page 11 for photometric comparisons.

ELECTRICAL

*Based on 3500K CCT

50,000 HR lifetime (Ta= -25°C to 50°C; Tc max 75°C); 5 year limited warranty

LINEAR LEDs

EssentialLEDs® Exterior Linear products provide bright and even linear lighting for applications such as: • Architectural Accents • Exterior Wall, Pillar & Wall Grazing • Sit Walls & Planters • Handrails • Outdoor Kitchens & BBQs • Waterfalls & Other Water Features (non-submersed) • Exterior Signage Also recommended for interior use in spas, showers and water features. The 5SLW fixture is available with a choice of four LED boards that vary in lumen output, energy use, color temperature and CRI. See "Best Used For" information on chart above for application guidance. EssentialLEDs® Linear products are dimmable and available in custom lengths up to 72"[1830mm]. Visit the VLT website for application photos and the most recent IES files.

Fixed Mounting Clips

(UL 2108, 8750);

Choose from 4 LED Boards for a Range of Lumen Outputs and CRI Options

RoHS Compliant (if specified); LM79, LM80 ; Title 24, IP67 (Wet Location)

MADE in USA

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W163

5SLW Square Extrusion - Exterior IP67 | Exterior rated square extrusion for linear lighting applications. Includes Nichia LEDs with either Standard 2640 LED Board (429 lm/ft*, 3.5 w/ft, 85 CRI), Low Output 1118 LED Board (173 lm/ft*, 2.7 w/ft, 87 CRI), High CRI 3645 LED Board (443 lm/ ft*, 5.5 w/ft, 90+ CRI), High Output 4645 LED Board (516 lm/ft*, 5.5 w/ft, 85 CRI). Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K (Depending on LED Board.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Choice of Clear Acrylic lens (standard) or 3 Opal diffusion lenses. Mounting clips on page 42.

5SLW - _________ - ________ - _________ - _________ - __________ - ____________ - _________ CCT

LED 173 lm/ft, 2.7 w/ft, 20 1118 87 CRI 24 429 lm/ft, 3.5 w/ft, 27 2640 85 CRI 30 443 lm/ft, 5.5 w/ft, 3645 35 92+ CRI 516 lm/ft, 5.5 w/ft, 40 4645 85 CRI 45 50

Finish

Lens Options

Wire Exit

2000°K 1

AL Silver

PG Clear Acrylic

2400°K 2

BL Black

OP1 Opal 1, Frosted

2700°K

BZ Bronze

OP2 Opal 2, Medium

3000°K 3500°K

WH White

WE1R 4’ Bare End

OP3 Opal 3, Heavy

C Custom

Listings ETL CE

ETL Listed CE Listed (RoHS)

Fixture Length Use Code from Chart of Standard Lengths below, or specify Custom Length as follows: C (12.25") [C (311 mm] Max. Length: 72"

4000°K 4500°K 5000°K

2640 & 4645 Boards Only 2 Not Available for 3645 Board 1

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions. Code

Fixture Lengths

1118

2640

5 .12" [130mm]

0 .90w

1 .2w

3645 / 4645 1.5w

9 .06" [230mm]

1 .79w

2 .4w

3.0w

13 .00" [330mm]

2 .69w

3 .5w

4.5w

16 .93" [430mm]

3 .58w

4 .7w

6.0w

20 .87" [530mm]

4 .48w

5 .9w

7.5w

24 .80" [630mm]

5 .38w

7 .0w

9.0w

28 .74" [730mm]

6 .27w

8 .2w

10.5w

32 .68" [830mm]

7 .17w

9 .4w

12.0w

36 .61" [930mm]

8 .07w

10 .5w

13.5w

40 .55" [1030mm]

8 .96w

11 .7w

15.0w

44 .49" [1130mm]

9 .06w

12 .9w

16.5w

48 .43" [1230mm]

10 .7w

14 .0w

18.0w

52 .36" [1330mm]

11 .6w

15 .2w

19.5w

56 .30" [1430mm]

12 .5w

16 .4w

21.0w

60 .24" [1530mm]

13 .4w

17 .5w

24.0w

64 .17" [1630mm]

14 .3w

18 .7w

25.5w

68 .11" [1730mm]

15 .2w

19 .9w

27.0w

72 .05" [1830mm]

16 .1w

21 .0w

28.5w

The fixture lengths listed at left are considered “standard” lengths. Any fixture length that differs from these lengths would be considered a “custom” length. “Custom” length fixtures have an overall finished length (including end caps) exactly as specified. Because the LED boards are limited to 4” increments, the LED board that is the next size down will be centered inside the custom length fixture. LEDs have a generous field angle, so a fixture does not need to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixtures are most often used where the fixture is visible and an exactlength is desired for aesthetic reasons.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 41

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X103

CAT. NO.

SPECIFICATIONS

0.60 “ [15.29mm]

FIXED CLIP

Dimensions: 1.095" [27.81mm] x 0.210" [5.33mm] Material: 301 Stainless Steel

ELL -AC - 5SLW-MC

Description:

Fixed Metal Clip for mounting 5SLW square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20" of extrusion (min. 2 per fixture).

0.88" [22.28mm]

page 42

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Specialty Display

Products: Elegance Puck, LightRun, Elegance Puck, Elegance2

page 43

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W173

LightRun Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1184 LED Board available in 2700K, 3000K, 3500K, 4000K, 4500K & 5000K.

The EssentialLEDs® LightRun fixture was developed for use in retail display applications where the bright reflection of individual LED diodes can be an unwelcome visual distraction.

1184/ 700mA Driver LUMEN OUTPUT

STANDARD 400 lm/ft [1312 lm/m]

ELEVATED 556 lm/ft [1824 lm/m]

POWER CONSUMPTION

not including driver losses

6.6w/ft [20.7w/m]

APPLIED LED

Nichia 157b

LED EFFICACY

108 lm/w

FIXTURE EFFICACY

63 lm/w

not including driver losses

LightRun features a proprietary 1184 LED board and unique diffuse lens. LightRun creates a single linear light source that eliminates individual diode reflections and beautifully illuminates the details of designer handbags, small leather goods and other types of highly detailed merchandise.

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

ELECTRICAL

LENGTHS FINISH LENSING

All photometrics based on 3500K CCT

Diffuse lens

Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes on request

Up to 58.66" [1490mm]; see Length & Wattage Table (page 43) for all standard length options Driver Type: Constant Current, 700mA, Class 2 UL Listed Input Voltage: 4v - 40v Dimming: 0-10 v DMX Trailing Edge (see Driver Cut Sheet) Feed Wire: 96" [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 95° F [-30° to 35° C]

Visit the VLT website for application photos and most recent IES files.

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

MADE in USA Fixed or Adjustable Mounting Clips (UL 2108 & 8750);

;

RoHS Compliant (if specified); LM79, LM80 ; IP20

CCT

page 44

LightRun uses dimmable LEDs in six color temperatures. It is available in 3.858" [98.00mm] increments up to a length of 58.66" [1490mm].

Light Output Conversion

2700K

3000K

3500K

4000K

4500K

5000K

0.88

1.0

1.08

LightRun’s proprietary LED board places the LEDs right next to each other, for a continuous run of light. Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W173

LightRun - Lensed IP20 | Medium square extrusion with specialized Constant Current LED board and diffuse lens for linear lighting in display applications. Dry location. Includes one row of Nichia LEDs (400lm/ft, 6.3w/ft, 87 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Optional Elevated LED board increases light output with slightly more noticeable hotspots.

0.531" [13.4mm]

Elevated

0.531" [13.4mm]

Standard

0.633" [16.07mm]

ELL- LR - _________ - _________ - _________ - _________ - __________ - __________ - __________ LED

CCT

Finish

Lens Options

1184 400 lm/ft*, 6.6 w/ft*, 87 CRI

27 2700°K

AL Silver Anodized

DL Diffuse Lens

30 3000°K

BL Black Anodized

35 3500°K

BZ Bronze

D2 Holographic Film

40 4000°K 45 4500°K

Wire Exit

Listings & Options

WE1 Default

Fixture Length Use Code from Chart of Standard Lengths below, or specify Custom Length* as follows: C (12.25") C (311 mm) Max. Length: 60"

WH White C Custom

50 5000°K

ETL

ETL Listed

UL Listed

CE Marked

Elevated

MAG

Magnetic Mount

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions. Code

Fixture Lengths

1184

4 .65" [118mm]

2.2w

8 .50" [216mm]

4.4w

12 .36" [314mm]

6.6w

16 .22" [412mm]

8.8w

20 .07" [510mm]

11.0w

23 .94" [608mm]

13.2w

27 .80" [706mm]

15.4w

31 .65" [804mm]

17.6w

35 .51" [902mm]

19.8w

39 .37" [1000mm]

22.0w

43 .22" [1098mm]

24.2w

47 .08" [1196mm]

26.4w

52*

50 .94

[1294mm]

28.6w

56*

54 .80

[1392mm]

30.8w

60*

58 .66

[1490mm]

33.0

The fixture lengths listed at left are considered “standard” lengths. Any fixture length that differs from these would be considered a “custom” length.

Beam Angle 116°

“Custom” length fixtures have an overall finished length (including end caps) exactly as specified. Because the LED boards are limited to 4” increments, the LED board that is the next size down will be centered inside the custom length fixture. LEDs have a generous field angle, so a fixture does not need to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixtures are most often used where the fixture is visible and an exact-length is desired for aesthetic reasons. For finished fixture lengths longer than those listed at left, two LightRun LED Boards can be contained within a single longer extrusion, with boards wired separately at opposite ends of the extrusion.

*Available as UL Listed version only

Fixture Accessories ELL - AC - LR - MC

ELL - AC - LR - AMC

ELL - AC - S123 - AB

page 45 Fixed Metal Clip. Extrusion snaps into clip. Can be used in conjunction with Adjustable Bracket.

Adjustable Metal Clip with offset screw attachment for flush mount; bends to desired angle.

Metal Hinged Bracket for use in conjunction with fixed metal clip; allows 30° adjustability, repeated adjustments, and simplifies angled adjustments in hard-to-reach areas.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W243

Mini LightRun Fundamentals EssentialLEDs® super small-profile Mini LightRun was developed to provide outstanding LED lighting in the smallest linear form possible. For retail display applications where reflected LED diodes can be an unwelcome visual distraction, Mini LightRun’s Holographic Film lensing delivers bright, diffuse light without individual diode reflections or multiple shadowing.

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. All LEDs available in 2700K, 3000K, 3500K, 4000K, 4500K & 5000K. 5163

Beam Angle

LUMEN OUTPUT

407 lm/ft [1335 lm/m]

116°

POWER CONSUMPTION

6.6w/ft. [21.6w/m]

LED Board

CRI

CCT OPTIONS

2400K, 2700K, 3000K, 3500K, 4000K, 4500K, 5000K

APPLIED LED

Nichia 157b

LED EFFICACY*

108 lm/w

*Based on 3500K CCT

TBD: Not all new fixture data available at time of printing. Please check website for complete information.

LENSING FINISH LENGTHS

Up to 96" [2420mm]; see Length & Wattage Table (page 41) for all standard length options Driver Type: Constant Voltage, Class 2 UL Listed Input Voltage: 24vDC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, or via 0-10 volt with Electronic Driver Feed Wire: 96" [2.44m] of 20 AWG Wire [1.02mm2] with Connector Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

Mini LightRun uses dimmable LEDs in six color temperatures. It is available up to a length of 96" [2420mm].

50,000 HR lifetime (Ta= -25°C to 50°C; Tc max 75°C); 5 year limited warranty

Visit the VLT website for application photos and most recent IES files.

Fixed Mounting Clips

MADE in USA

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

All fixtures available in silver, black, bronze or white powder coated finish; custom finishes on request

ELECTRICAL

Mini LightRun’s proprietary 5163 LED board places the LEDs right next to each other for a continuous run of light. In addition, the 5163 LED board can be cut into increments as small as one inch, making it our most flexible board option for custom length fixtures.

Holographic Film

(UL 2108, 8750);

;

RoHS Compliant (if specified); LM79, LM80 ; Title 24, IP20

Mini LightRun’s proprietary LED board places the LEDs right next to each other, for a continuous run of light.

page 46

CCT Light Output Conversion

2400K

2700K

3000K

3500K

4000K

4500K

5000K

0.88

1.0

1.08

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W243

0.30" [7.85mm]

IP20 | Rounded extrusion for linear lighting includes one row of Nichia LEDs on pitchless 5163 LED Board (548 lm/ft, 6.6 w/ft, 87 CRI) and Holographic Film lens. Dry location. Standard color temperatures of 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes.

0.35" [9.0mm]

Mini LightRun - Lensed

(Photometrics vary based on CCT; see chart on page 11 for conversion and other data specific to your fixture.)

0.35" [9.0mm]

ELL- MLR - _________ - _________ - _________ - _________ - __________ - __________ - __________ LED

CCT

5163 548 lm/ft, 6.6 w ft, 87 CRI

Finish

Lens Options

24 2400K

AL Silver Anodized

27 2700°K

BL Black Anodized

D Holographic Film

30 3000°K

BZ Bronze

35 3500°K 40 4000°K

Wire Exit WE1 Default

Fixture Length

Listings & Options ETL

ETL Listed

UL Listed

CE Use Code from Chart of Standard Lengths below, MAG or specify Custom Length* as follows: C (12.25") C (311 mm]

WH White C Custom

45 4500°K

CE Listed (RoHS) Magnetic Mount

50 5000°K

Mini LightRun Extrusion Length & Wattage Table Fixture Lengths

Total Wattage

4 .65" [118mm]

2.2w

8 .50" [216mm]

4.4w

12 .36" [314mm]

6.6w

16 .22" [412mm]

8.8w

20 .07" [510mm]

11.0w

23 .94" [608mm]

13.2w

27 .80" [706mm]

15.4w

31 .65" [804mm]

17.6w

35 .51" [902mm]

19.8w

39 .37" [1000mm]

22.0w

43 .22" [1098mm]

24.2w

47 .08" [1196mm]

26.4w

50 .94" [1294mm]

28.6w

54 .80" [1392mm]

30.8w

58 .66" [1490mm]

33.0w

62 .51" [1588mm]

35.2w

66 .37" [1686mm]

37.4w

70 .23" [1784mm]

39.6w

74 .09" [1882mm]

41.8w

77 .95" [1980mm]

44.0w

81 .81" [2078mm]

46.2w

85 .67" [2176mm]

48.4w

89 .53" [2274mm]

50.6w

93 .39" [2372mm]

52.8w

“Custom” length fixtures have an overall finished length (including end caps) exactly as specified. Because the 5163 LED board can be cut into increments as small as one inch, it is our most flexible board for the specification of custom-length fixtures, and can be used to produce fixtures as small as 1.75“ [41.91mm]. Please contact factory for more information about custom lengths. LEDs have a generous field angle, so a fixture does not need to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixtures are most often used where the fixture is visible and an exact-length is desired for aesthetic reasons.

Fixture Accessory ELL - AC - MLR - MC 0.134"

Code

The fixture lengths listed at left are considered “standard” lengths. Any fixture length that differs from these would be considered a “custom” length.

[3.40mm]

Use Code numbers to specify Standard Length extrusions.

0.384" [9.760mm]

Fixed Metal Clip. Fixed Metal Clip for mounting Mini LightRun extrusion. Screws to mounting surface with screw, provided. Fixture snaps into clip. Allow 1 per 12” of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 47

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W223

LightRun Dual Color Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1188 LED Board available in 2700K/4000K, 2700K/4500K, 3000K/4000K & 3000K/4500K as standard. Also available in single color 2700K, 3000K, 3500K, 4000K, 4500K & 5000K.

The EssentialLEDs® LightRun Dual Color fixture was developed for retail display applications where the bright reflection of individual LED diodes can be an unwelcome visual distraction.

1188 DC/ 24V LUMEN OUTPUT

424 lm/ft [1391 lm/m] (all LEDs at full on position)

POWER CONSUMPTION

not including driver losses

6.6 w/ft. [21.6w/m]

APPLIED LED

Nichia 157b

LED EFFICACY

108 lm/w

FIXTURE EFFICACY

64 lm/w

not including driver losses

Dual Color 1188 board option allows specification of two CCTs with separate power leads, allowing independent dimming control and variable color temperature mixing.

All photometrics based on 3500K CCT

page 48

Diffuse lens

Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes on request

Up to 93.39" [2372mm]; see Extrusion Length & Wattage Table for all standard length options Driver Type: Constant Voltage, Class 2 UL Recognized (ETL Listed as a system) Input Voltage: 24V, 2 Control Channels (1 warm, 1 cool) Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, Electronic Low-Voltage with HELD Driver or via 0-10 volt with Electronic Driver

Feed Wire: 2 - 96" [2.44m] of 20 AWG Wire [1.02mm2], Male Connector (1 warm, 1 cool) Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

LightRun Dual Color in 10 CCT combinations with unlisted combinations available based on quantity. It is available in 3.858" [98.00mm] increments from 4.65" [118mm] up to a length of 93.39" [2372mm]. Visit the VLT website for application photos and most recent IES files.

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

ELECTRICAL

LENGTHS FINISH LENSING

LightRun Dual Color’s proprietary LED board alternates LEDs in two CCTs with separate power leads for independent dimming control and variable color temperature mixing. The LEDs are placed right next to each other for a continuous run of light.

LightRun Dual Color uses a unique diffuse lens to create a single linear light source that eliminates individual diode reflections and beautifully illuminates the details of designer handbags, small leather goods and other types of highly detailed merchandise.

Fixed or Adjustable Mounting Clips

CCT

2700K

3000K

3500K

4000K

4500K

5000K

0.88

1.0

1.08

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

;

(UL 2108 & 962);

MADE in USA RoHS Compliant (if specified); LM79, LM80 ; IP20

Light Output Conversion

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W223

LightRun Dual Color - Lensed IP20 | Medium square extrusion with specialized dual CCT LED board and diffuse lens for linear lighting in Display applications. Dry location. Fixture comes standard with independent dimming control of both CCTs to allow variable color temperature mixing. Includes one row of Nichia LEDs (424 lm/ft, 3.42 w/ft, 87 CRI). Dual color temperatures of 2700K/4000K, 2700K/4500K, 3000K/4000K and 3000K/4500K or standard single color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K or 5000K. All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Optional Elevated LED board increases light output with slightly more noticeable hotspots.

0.531" [13.4mm]

Elevated

0.531" [13.4mm]

Standard

0.633" [16.07mm]

ELL- LRDC - _________ - _________ - _________ - _________ - _________ - _________ - _________ LED

CCT

Finish

Lens Options

1188 424 lm/ft, 6.6 w/ft, 87 CRI

27/40 2700°K / 4000°K

AL Silver Anodized

DL Diffuse Lens

27/45 2700°K / 4500°K

BZ Bronze

30/40 3000°K / 4000°K

BL Black Anodized

Wire Exit WE1 Default

Fixture Length Use Code from Chart of Standard Lengths, or specify Custom Length* as follows: C (12.25") C (311 mm] Max. Length: 93.39" [2396mm]

WH White C Custom

30/45 3000°K / 4500°K

Listings & Options ETL

ETL Listed

UL Listed

CE Marked

Elevated

(*See more about Custom Length fixtures on following page.)

Beam Angle 116°

Fixture Accessories ELL - AC - LR - MC

ELL - AC - LR - AMC

ELL - AC - S123 - AB

Fixed Metal Clip. Extrusion snaps into clip. Can be used in conjunction with Adjustable Bracket.

Adjustable Metal Clip with offset screw attachment for flush mount; bends to desired angle.

Metal Hinged Bracket for use in conjunction with fixed metal clip; allows 30° adjustability, repeated adjustments, and simplifies angled adjustments in hard-to-reach areas.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 49

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W223

Extrusion Length & Wattage Table - LightRun Dual Color Use Code numbers to specify Standard Length extrusions.

Code

Fixture Lengths

4 .65" [118mm]

8 .50" [216mm]

12 .36" [314mm]

16 .22" [412mm]

20 .07" [510mm]

23 .94" [608mm]

27 .80" [706mm]

31 .65" [804mm]

35 .51" [902mm]

39 .37" [1000mm]

43 .22" [1098mm]

47 .08" [1196mm]

50 .94" [1294mm]

54 .80" [1392mm]

58 .66" [1490mm]

62 .51" [1588mm]

66 .37" [1686mm]

70 .23" [1784mm]

74 .09" [1882mm]

77 .95" [1980mm]

81 .81" [2078mm]

85 .67" [2176mm]

89 .53" [2274mm]

93 .39" [2372mm]

1188 2 .2w 4 .4w 6 .6w 8 .8w 11 .0w 13 .2w 15 .4w 17 .6w 19 .8w 22 .0w 24 .2w 26 .4w 28 .6w 30 .8w 33 .0w 35 .2w 37 .4w 39 .6w 41 .8w 44 .0w 46 .2w 48 .4w 50 .6w 52 .8w

The fixture lengths listed above are considered “standard” lengths. A fixture length that differs from these would be considered a “custom” length. “Custom” length fixtures have an overall finished length (including end caps) exactly as specified. Because the LED boards are limited to 4” increments, the LED board that is the next size down will be centered inside the custom-length fixture. LEDs have a generous field angle, so a fixture does not need to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixtures are most often used where the fixture is visible and an exact-length is desired for aesthetic reasons.

page 50

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Notes: __________________________________________________

In this unique application for Watches of Switzerland in London, EssentialLEDs® LightRun fixtures were used to illuminate each tread of a dramatic multi-floor staircase. LightRun’s proprietary LED board allows full diffusion of the LEDs in a half-inch extrusion, ensuring that each step glows softly, without the distraction and glare of reflected diodes. Photo by Chris Eden © 2014 Callison LLC

page 51

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W183

Elegance2 Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 4219C LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

4219C/350mA Driver LUMEN OUTPUT

296 min.

FIXTURE WATTAGE

4.4w

CRI

Beam

Lumens

Footcandles @ 12"

15°

400 lm

1741 fc

30°

353 lm

1078 fc

94 lm/w

60°

340 lm

592 fc

67 lm/w min.

30° x 60°

296 lm

459 fc

CCT OPTIONS

2700K, 3000K, 3500K, 4000K & 4500K

APPLIED LED

Nichia 219C

LED EFFICACY* FIXTURE EFFICACY* not including driver losses

15°, 30°, 60° and 30° x 60°

Driver Type: Constant Current, 350mA, Class 2 UL Recognized Input Voltage: 12.7v Dimming: 0-10 v Trailing Edge (see Driver Cut Sheet) Feed Wire: 96" [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 104° F [-30° to 40° C] 50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

Multiple options including stems, bushings, surface mount and free standing

LISTINGS & TESTS

LIFE & WARRANTY

1.49" x 1.74" x 0.41" [37.84mm x 44.19mm x 10.41mm]

MOUNTING

DIMENSIONS

Silver, Black, Custom finishes on request

ELECTRICAL

FINISH LENSING

All photometrics based on 3500K CCT

(2108, 8750) ;

Elegance² offers 15°, 30°, 60° and 30° x 60° lensing options; 30° x 60° option creates an oval light distribution that is ideal for illuminating elongated merchandise like handbags and jewelry. Elegance² heads can be stem-mounted for free-standing installation, or attached directly to the case structure in surface-mount or recessed-mount configurations.

RoHS Compliant (if specified); LM79, LM80 ; IP20

page 52 CCT Light Output Conversion

The EssentialLEDs® Elegance2 fixture was developed to provide exceptional lighting flexibility in retail display applications. Its high light output, low energy use and long lamp life make Elegance² an ideal fixture for fully illuminating small displays, or adding focused highlights to larger casework. The compact and adjustable head has a tilt range of +/- 65° to accomodate changing display needs.

2700K

3000K

3500K

4000K

4500K

0.88

1.0

1.08

Elegance² fixtures are dimmable and available in five color temperatures, with a CRI of 87. LED component can be replaced in field by trained technician. Visit the VLT website for application photos and most recent IES files.

MADE in USA

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W183

Beam Angle (lens)

15°

30°

60°

30°/ 60°

Elegance2 Head Tilts Back and Forward 65°

1.74" [44.1mm]

65°

1.74" [44.1mm]

IP20 | Compact square fixture featuring specialized Constant Current LED board and lensing for display applications. Includes four Nichia LEDs (296 lm*, 4.0 w, 87 CRI) in color temperatures of 2700K, 3000K, 3500K, 4000K 4500K. All LEDs include ±60K Micro Binning. Fixture head tilts +/- 65°, with 15°, 30° , 60° or 30°x60° lens options. Silver, Black or Custom Finishes. Multiple mounting options available. *Photometrics vary based on CCT; see chart on page 52 for conversion.

0.41" [10.4mm]

1.49" [38mm]

Variable; see mounting details below

ELL- EG2 - _________ - _________ - _________ - _________ - __________ - __________ LED

CCT

4219C 296+ lm, 4.4 w, 87 CRI

27 2700°K

AL Silver

15 15° Lens

30 3000°K

BL Black

35 3500°K

Finish

Lens Options

C Custom

40 4000°K

Wire Exit

Listings & Mounting Options

WE1 Default

UL Listed

30 30° Lens

CE Marked (RoHS)

60 60° Lens

ST1

Stem Mount, 0.25" [6.35mm] max

3060 30° x 60°

ST2

Stem Mount, 0.75" [19.05mm] max

Bushing Mount

Surface Mount

FS6

8mm Free Stand Mount 6" [152.4mm]

FS12

8mm Free Stand Mount 12" [304.8mm]

FS18

8mm Free Stand Mount 18" [457.2mm]

45 4500°K

Mounting Options Stem Mount(ST1,ST2)

Bushing Mount(BU)

Max 1.955" [49.65mm]

Max 1.973" [50.11mm]

Max 1.816" [46.12mm]

Free Stand Mount(FS6,FS12,FS18)

Stem Mount provides most minimal mounting option; stem attaches with nut on rear side of mounting surface; no rotation. Choose ST1 or ST2 based on the thickness of mounting surface. Max thickness for ST1: 0.25" [6.35mm] Max thickness for ST2: 0.75"[19.05mm

.312 in [7.93mm] Cutout .8113 in [20.56mm] Cutout

Bushing Mount provides the finished look of a ferrule at fixture base, allows 360° rotation of fixture head; position can be fixed with set screw. Bushing is attached with nut on rear side of mounting surface. Maximum mounting surface thickness 1.25" [38.1mm].

1.00 in [25.4mm]

1 inch to 18 inches [25.4mm to 457.2mm]

ST2: Max 0.75" [19.05mm] .312 in [7.93mm] Cutout

Adjustable Stem Height

Max 19.85" [504.19mm]

1.25 in [38.1mm] Max

ST1: Max 0.25" [6.35mm]

Surface Mount(SU)

.75 in [19.05mm] Cutout

Surface Mount option allows installation of fixture with screws to top surface, no rear access necessary. Surface Mount allows 360° rotation of fixture head; postion can be fixed with set screw.

Free Stand Mount available in three stem height options; further height adjustment possible via set screw in fixture base. Free Stand Mount allows fixture installation with screws on top surface or with nut on rear side (no more than 1" mounting surface thickness recommended.) Top surface mount allow 360° rotation after installation; nut on rear side does not. See page 33 for bushing installation details.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 53

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W233

Elegance Puck Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 4219C LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

4219C/350mA Driver/Round

4219C/350mA Driver/Square

LUMEN OUTPUT

285

312

FIXTURE WATTAGE

4.4w

CCT OPTIONS

2700K, 3000K, 3500K, 4000K & 4500K

APPLIED LED

Nichia 219C

LED EFFICACY*

94 lm/w

FIXTURE EFFICACY*

67lm/w

71 lm/w

CRI

not including driver losses

DIMENSIONS LIFE & WARRANTY

MOUNTING

Round or Square fixtures offer 15°, 30°, 60° or 30° x 60° lensing options; 30° x 60° option creates an oval light distribution ideal for illuminating elongated merchandise such as handbags or jewelry.

Silver, Black, White, Bronze, Chrome

Round: 1.969" [50.00mm] Diameter, 0.531" [13.50mm] Thick Square: 1.969" [50.00mm] x 1.969" [50.00mm]

LISTINGS & TESTS

page 54

15°, 30°, 60° and 30° x 60°

ELECTRICAL

FINISH LENSING

All photometrics based on 3500K CCT Visit the VLT website for application photos and most recent IES files.

Elegance Puck fixtures are dimmable and available in five color temperatures, with a CRI of 87. The LED component can be replaced in the field by a trained technician.

MADE in USA

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

Round Puck

Square: Recessed Round: Recessed and Surface mount (2108, 8750) ;

RoHS Compliant (if specified); LM79, LM80 ; IP20

CCT Light Output Conversion

EssentialLEDs® Elegance Puck fixtures offer impressive light output, low energy use and long lamp life in a compact, low-profile form. Round and Square Pucks can be recess mounted, and the Round Puck can also be surface mounted with available accessory housing. Elegance Puck fixtures can provide full illumination for small displays, or add focused highlights in larger casework.

2700K

3000K

3500K

4000K

4500K

0.88

1.0

1.08

Beam

Lumens

Footcandles @ 12"

15°

312 lm

1555 fc

30°

314 lm

963 fc

60°

285 lm

510 fc

30° x 60°

308 lm

367 fc

Beam

Lumens

Footcandles @ 12"

15°

343 lm

1741 fc

30°

325 lm

1078 fc

60°

312 lm

591 fc

30° x 60°

274 lm

459 fc

Square Puck

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W233

Beam Angle (lens)

15°

30°

60°

30°/ 60°

Ø1.969in [50.00mm]

1.969in [50.00mm]

Ø0.787in [20.00mm]

1.969in [50.00mm]

Elegance Puck IP20 | Compact low-profile puck fixture with round or square face plate, featuring specialized Constant Current LED board and lensing for display applications. Includes four Nichia LEDs (296 lm*, 4.0 w, 87 CRI) in color temperatures of 2700K, 3000K, 3500K, 4000K 4500K. All LEDs include ±60K Micro Binning. For recessed mounting (or surface mounting using housing accessory.) Available with 15°, 30° , 60° or 30°x60° lens options. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. *Photometrics vary based on CCT, fixture shape and lensing; see charts on page 54

Recessed Installation (Round or Square)

Cutout Dimension: Ø1.625” [41.2mm]

Min. Mounting Surface Depth: 0.625" [15.87mm]

Flange 0.040" [1.0mm]

0.531" [13.50mm]

Ø1.969" [50.0mm]

4219C ELL- ________ - _________ - _________ - ___________ - _________ - ____________ - __________ Shape EPR Round

Finish

CCT

Lens Options

Silver

15 15° Lens

30 3000°K

Black

30 30° Lens

LED

35 3500°K

WH White

60 60° Lens

4219C 296+ lm, 4.4 w, 87 CRI

40 4000°K

Bronze

45 4500°K

Chrome

EPS Square

27 2700°K

SURFACE MOUNT ACCESSORY (ROUND ONLY)

Surface Mount Installation

Dimensions: 1.969" [50.0mm] x 0.689" [17.50mm]

0.689" [17.50mm]

UL Listed

CE Marked (RoHS)

3060 30° x 60°

SPECIFICATIONS

Material: Aluminum

Listings

Wire Exit WE1 Default

CAT. NO.

ELL -AC - EPR-SMA -

Description: Surface Mount Accessory housing

converts Elegance Puck Round fixture into surface mount fixture. Housing screws to mounting surface with two screws (provided); Elegance Puck Round fixture snaps into housing. One per fixture. Overall height including fixture is 0.70in (18.0mm); Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture.

AL BL BZ WH CH

1.969" [50.0mm]

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 55

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W193

Orb Fundamentals The EssentialLEDs® Orb fixture was developed for use in retail display applications, with rotatable heads seated into self-mounting angled housing; heads rotate independently and lock securely in desired position.

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1219C LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K. Photometric and wattage data presented below is PER HEAD.

1219C/ 700mA Driver LUMEN OUTPUT

151 lm

FIXTURE WATTAGE

3.0 w

CRI

CCT OPTIONS

2700K, 3000K, 3500K, 4000K & 4500K

APPLIED LED

Nichia 219C

LED EFFICACY*

94 lm/w

FIXTURE EFFICACY*

32 lm/w

not including driver losses

Beam

Lumens

Footcandles @ 12"

14°

138 lm

644 fc

29°

140 lm

579 fc

60°

97 lm

416 fc

The Orb housing tucks neatly into top, bottom, or side corners of display windows, niches or millwork. From one to six rotatable heads available in 14°, 29° or 60° lens options. Orb’s high light output, low energy use and long lamp life make it an ideal fixture for beautifully illuminating displays of jewelry, handbags and other types of highly detailed merchandise.

LENSING FINISH

Silver, Black & Custom Finishes on request Driver Type: Constant Current 350mA, 500mA or 700mA, Class 2 UL Recognized Input Voltage: 3v - 6v Dimming: 0-10 v Feed Wire: 96" [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 95° F [-30° to 40° C]

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

14° , 29° or 60° Lens

ELECTRICAL

All photometrics based on 3500K CCT

page 56

Orb fixtures are dimmable and available in five color temperatures, with a CRI of 87. LED component can be replaced in field by trained technician. Visit the VLT website for application photos and most recent IES files.

MADE in USA

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty

Mounting V Flange standard (2108, 8750) ;

RoHS Compliant (if specified); LM79, LM80 ; Title 24 Pending, IP20

CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

0.88

1.0

1.08

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W193

+ - 90°

IP20 | Display lighting fixture featuring 90° angled mounting housing combined with 1, 2, 4 or 6 rotatable spherical LED lighting heads. Each head includes one Nichia LED (up to 151 lm*, up to 2.0 w, 87 CRI). Heads available with 14°, 29° or 60° lens and lock securely in desired position. Total Fixture Length between 4.118" and 16.56" [420.6mm] (Depending on head count.) Total Fixture Wattage varies based on head quantity and driver current. Available in 2700K, 3000K, 3500K, 4000K, 4500K. All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. *Photometrics vary based on CCT; see chart on page 56 for conversion.

1.71" [43.4mm]

2.12" [53.74mm]

Orb

Housing Length Including Mounting Flanges

Number of Heads 1 Head 2 Heads 4 Heads 6 Heads

Housing Length 3.118" [79.1mm] 6.00" [152.4mm] 10.72" [272.8mm] 15.45" [392.4mm]

Including Mounting Flanges 4.118" [104.5mm] 7.11" [180.5mm] 11.83" [300.5mm] 16.56" [420.6mm]

ELL- OR - _________ - _________ - _________ - _____ /_____ - __________ - __________- __________ LED

CCT

1219C 151 lm/head*, 3.1 w/head*, 87 CRI

27 2700°K

AL Silver

14 14° Lens

30 3000°K

BL Black

29 29° Lens

*Based on 700mA Driver

35 3500°K

Finish

Lens Options

C Custom

Listings

Wire Exit WE1 Default

Number of Heads

60 60° Lens

40 4000°K

1 1 Head

45 4500°K

2 2 Heads

UL Listed

CE Marked (RoHS)

4 4 Heads 6 6 Heads

Orb tucks into corners of display niches and windows

Beam Angle (lens)

14°

29°

60°

page 57

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X123

Constant Current Wiring Accessories Connectors Fixtures come with 96" [2.44m] of 20 AWG wire and male JST Slim Seal connector as standard; customization available; connector can be removed for hard wired installation. Starter, splitter and interconnect wiring accessories for easy installation below. Multiple constant current fixtures in the same circuit are wired in series, whereby the fixtures are connected along a single path, with the same current flowing through all fixtures. If there is a break in the circuit (i.e. an open connector), none of the LEDs will work.

Female

Male

0.75" L x 0.26" W x 0.16"H [19.0mm x 6.7mm x 4.0mm]

0.51" L x 0.25" W x 0.13"H [13mm x 6.3mm x 3.2mm]

When using a splitter to connect multiple constant current fixtures in the same circuit, EVERY connector must be mated with a fixture or with the terminator plug provided to avoid breaking the circuit. Starter Cables have bare wires on one end to connect directly to LED driver terminals or to wires via wire nuts, and one (1) female connector for connection to a fixture, splitter accessory, or interconnect wire. Splitters connect multiple fixtures to a single driver; 2- way, 4-way or 8-way options; one (1) male connector, multiple female connectors. Interconnect Wires extend wiring between driver and fixture or between splitter accessory and fixture; (1) one female connector, (1) one male connector. All Wiring Accessories are ETL Listed (UL 2108), when used as part of an EssentialLEDs® system. 2 FT or 8 FT STARTER CABLE

CAT. NO.

SPECIFICATIONS

ELL - AC - CC - SC -

Description: Bare wires and female connector. Bare wires connect to LED driver terminals or to wires via wire nuts; female connector connects directly to fixture, splitter or interconnect wire. 2’ or 8’ lengths, 20 AWG wire.

2, 4 or 8- WAY SPLITTER

8.00" (203.20mm)

INTERCONNECT WIRES

page 58

SPECIFICATIONS

x2 x4 x-8

CAT. NO. ELL - AC - CC - SPL 2 4 8

Description: One male connector with multiple female connectors. Allows 2, 4 or 8 fixtures to connect to a single driver; male connector connects to starter cable; female connectors connect to fixtures or interconnect wires. Overall length 8"; Each female connector 3" long. 20 AWG wire.

SPECIFICATIONS

2 8

CAT. NO. ELL - AC - CC - ICW -

Description: One male and one female connector for extending connection between driver and fixture or between driver and splitter accessory. . 2’, 4’, 5’ and 10’ lengths, 20 AWG wire.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

2 4 5 10

Visual Lighting Technologies

EssentialLEDs

light panel

Product: ELP-L, ELP-L ELP-G, ELP-L

page 59

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X133

About Light Panel EssentialLEDs® Light Panel is a highly customizable lighting product that is ideal for backlighting materials like Acrylic Panels, Frosted Glass, Onyx or Stretched Fabric. We offer two versions of Light Panel, as described below: Integrated White Rigid PVC Substrate

White Rigid PVC Substrate

Pre-drilled Mounting Holes 1 per 16” OC (standard))

5/8"

Pre-drilled Mounting Holes

5/8"

ELP-L ELP-L is the most popular version of EssentialLEDs® Light Panel because of its versatility in customization and lower cost. ELP-L offers two wattage/lumen options, variable spacing options, and eight CCT options in addition to variable color temperature mixing (two different CCTs with separate dimming control). ELP ‐L can be combined with T‐Bar or suspension hardware for use as a general lighting source, and can also be used as a light source in custom-designed fixtures.

ELP-G ELP‐G is a specialized version of EssentialLEDs® Light Panel, developed specifically for backlighting stretched fabric ceiling installations. ELP-G features features LEDs arranged on a 1" x 1" (nominal) grid, with an onboard regulated power supply that allows it to produce the very high efficacy level of 144 lumens per watt. ELP‐G is available in five CCT options, and can backlight translucent fabric ceilings with zero lamp imaging hot spots in a mere five inches of throw distance. Learn more on page 62.

page 60

From the beginning, Visual Lighting Technologies has been proud to use LEDs from the Nichia Corporation as our applied LED. As one of the world’s leading LED manufacturers, Nichia has leveraged its vast experience with phosphors to create beautiful white light LEDs in a full range of color temperatures. You can learn all about our very selective LED binning process in the “Binning and Chromaticity" section on page 7.

NT OU I

About the LEDs

Both ELP-L and ELP-G consist of LED modules placed on a lightweight expanded PVC substrate, and both can be fabricated in custom shapes and sizes up to 60" x 120" in a single panel. ELP-G can also be purchased as individual modules for installation in niches or millwork.

H OLE Both Panel Types Ship with Stickers That Clearly Mark Mounting Holes

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X133

Light Panel Photometrics ELP-L

2’ x 2’ panel 1113

835

557 3 278

Pictured: 6 LED x 6 LED grid (2’ x 2’ panel) = 36 .25w LEDs

Throw Distance

Average Foot Candles

1 ft.

1113

2 ft.

278

3 ft.

124

4 ft.

Maximum Candela = 1113 Located At Horizontal Angle = 0, Vertical Angle = 0 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) : BLUE # 2 - Vertical Plane Through Horizontal Angles (45 - 225) : MAGENTA # 3 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) : RED

Throw Distances ELP-L

ELP-G

Lit Surface (acylic, onyx, etc.) 2.0" [50.8mm]*

Lit Surface (stretched fabric) Light from ELP-G is evenly blended at 1" [25.4mm] BUT with highly transluscent materials like Newmat and Barrisol hot spots require 5" [127mm]

to fully disappear.

ELP-L is the perfect choice for backlighting materials like acrylic and onyx. Standard ELP-L includes an integrated diffusor and requires only 2" of cavity space for the LED diode light points to fully blend. Where cavity space is less than 2", use of a secondary diffusor (i.e. opal acrylic) may enable full diffusion in less than 2". When backlighting materials like 3form, stained or frosted glass, use of a secondary diffusor (i.e. opal acrylic) will allow even backlighting without visible hot spots. A mock-up using proposed materials is always recommended.

5.0" [127mm]*

Due to the highly transluscent nature of materials like Newmat and Barrisol stretched fabric ceilings, full diffusion of the backlighting source becomes more difficult. ELP-G, with its 1"x1" LED spacing and exposed LED board construction, can provide full diffusion without “hot spots" in just 5" of cavity space (as compared to a range of 12" to 16" with fluorescent lamps). See page 60 for more information regarding stretched fabric ceilings. Where cavity space is extremely limited, materials like acrylic and onyx can also be evenly backlit with ELP-G in just 1" of cavity space. *Dimension appropriate for most applications. Mock-up recommended to determine optimum distance.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 61

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X133

Backlighting Stretched Fabric Ceilings Stylish and versatile stretched fabric ceilings - such as those manufactured by Newmat or Barrisol - are popular for a wide range of commercial, retail, hospitality and residential applications. ELP-G Light Panel was designed and engineered specifically to provide a superior result when backlighting these stretched fabric ceilings. A regulated on-board power supply on each individual ELP-G LED board allows the product to achieve a very high efficiency level of 144 lumens per watt (576 lumens per square foot), and the result is bright and even backlighting without the unattractive lamp imaging that often occurs with fluorescent light sources. ELP-G offers distinct advantages over fluorescent lamp backlighting: • Cavity Depth: ELP-G requires only 5" of separation between the LED panel and the stretched fabric to attain perfect diffusion*, in contrast to the 12" - 16" needed with fluorescent lamps. So even where plenum spaces are very limited, low profile ELP-G modules will provide completely diffuse light with zero lamp imaging. (* Smaller cavity may be possible. Must be determined with a mockup). • Edge-to-Edge Lighting: ELP-G panels screw directly to the installation surface using pre-drilled through-holes, and the range of ELP-G module sizes makes it possible to fully cover the ceiling surface - evenly and all the way to the edges - for beautiful backlighting without dark spots or edges. • Life Span & Maintenance: On average, LEDs are rated to last three to four times longer than standard T8 fluorescent lamps (100,000 hours vs 15,000 hours), a significant difference when dealing with the complexities of stretched fabric ceilings. Relamping behind stretched fabric panels requires that the ceilng be fully removed and then re-installed by the manufacturer - a factor that lengthens the task, complicates scheduling, and adds to the cost of lamp maintenance. And when you consider the environmental issues of spent fluorescent lamps - the glass and mercury content and cost of safe (and legal) disposal, the longer lifespan of the LED alternative is even more attractive. • Quality of Light: The small LEDs used in ELP-G provide excellent lumen output (576 lm/sq.ft., based on 3500K), with a full range of color temperatures and high CRI (87). Whether you’re lighting a warm residential interior or cool commercial spaces, ELP-G will provide the perfect CCT. And the small light points, with their 116° beam angles, provide an exceptionally even backlight. • Light Quality Over Time: Long before fluorescent lamps quit, they color-shift in different - and irregular - directions. Loss of mercury inside the lamp causes a shift to pink, often accompanied by black burns on the lamp ends and flickering. These issues are magnified by a stretched fabric application, where such irregularities are highly visible. In contrast, ELP-G delivers even lighting in very specific color temperatures that will remain constant over the much longer life of the product. Even as the product nears the end of its projected 100,000hr (LM80) lifespan, color temperature shift is minimal. Dimming ELP-G: Where security cameras are in operation (retail stores, office buildings, hospitality, etc.), use of Osram 0 -10v OTDIM units will result in flickering of video images. For these applications, Class 1 or Class 2 Mean Well HLG Series dimming drivers (pages 75,76 & 77) must be specified; these drivers have been tested and will not produce video flickering. Where dimming is not required, any electronic driver can be used. ELP-G cannot be driven using magnetic drivers.

Integrated Solution: Visual Lighting Technologies can provide a complete, turnkey backlit fabric page 62 1" x 1" (nominal) spacing provides exceptionally even backlighting.

ceiling, featuring beautiful ELP-G backlighting and a fully customized stretched fabric ceiling installation. We can fully coordinate design and installation of both lighting and ceiling for spectacular results.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X133

Light Panel LED Module Options LED module options for ELP-L and ELP-G differ; the team at VLT will help you choose the best product and the best layout for your application. ELP-L LEDs:

ELP-G LEDs:

Available in 2-, 3- or 6- LED modules. Spacing of LEDs is fixed at 2" OC [50.8mm]; spacing of modules on Light Panel is variable. 2" x 2" spacing = 8.0w/sq. ft. (Energy Saving version = 4.0w/sq. ft.)

Available in 6 module sizes with fixed 1"x1" [25.4mm x 25.4mm] (nominal) LED spacing. (Recommended for backlighting stretched fabric ceiling treatments) 1" x 1" spacing = 4.0w/sq. ft.

2 LED Module

3 LED Module

Module Sizes: 12" x 12", 12" x 6", 12" x 3", 6" x 6", 6" x 3", 3" x 3"

6 LED Module

2" [50.4mm]

ELP-L is available in three standard spacing options: 2" x 2", 2" x 3" or 2" x 4". Spacing for your project should be based on desired lumen output and cavity space available.

ELP-L can be made using LED modules in two different color temperatures with separate controls - an option that allows variable color temperatures from the same light panel. For example, variable-temp ELP-L can provide a “daylight" effect during the day that can be warmed at night - a great option for restaurant applications. *Drawings not to scale

2" [50.4mm] 3" [76.2mm]

4" [100.8mm]

Standard ELP-G modules are rectilinear, but angled and round shapes can also be evenly backlit. (variable CCT mixing)

Panel Shape & Size Options LED Light Panel shapes are not limited to squares and rectangles. Shapes such as the ones pictured below are easy to make. Provide a dimensioned sketch of the shape you need and VLT will determine the optimum module placement to provide the most even results. Shapes can be any size within the 60" x 120" [1524mm x 3048mm] maximum. Order sizes carefully - panels cannot be trimmed in the field.

Sink

page 63 LED Boards are arranged in custom configurations for even lighting of custom shapes Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W203

| LED Basics |

ELP-L Light Panel Specifications LED Board

Power Consumption

Lumen Output

LED Efficacy

CRI

2626

8.0 w/sq. ft

600 lm/sq. ft.

138 lm/w

2613

4.0 w/sq. ft

300 lm/sq. ft.

138 lm/w

[86.0w/sq. m] [83.0w/sq. m]

[6456 lm/sq. m] [3229 lm/sq. m]

2000K

| Efficacy |

Optical

Lumen Output*

(2’x 2’ Panel)* [1m x 1m Panel]* *Based on 2626 LED Board Only; Consult Factory for 2613 Data.

Light Output Conversion

Mechanical |

± 124°K

Micro ± 60°K

± 124°K

Micro ± 60°K

2700K

3000K

3500K

4000K

4500K

5000K

2112 lm 2112 lm 2112 lm 2400 lm 2400 lm 2592 lm 2592 lm 2592 lm [5681lm] [5681lm] [5681lm] [6456lm] [6456lm] [6972lm] [6972lm] [6972lm] .88

.88

1.0

Beam Angle/Field Angle

90° Beam Angle /120° Field Angle

CRI

CCT Tolerance

± 60K

1.08

ELP-L Light Panel EssentialLEDs® ELP-L Light Panel is the ideal product for use in backlit applications of materials such as:

LED Efficacy Fixture Efficacy

138 lm/w (2626 LED)

78 lm/w

Luminaire Efficacy (2626 LED)

70 lm/w Min: 2" x 4" ,

[50.8mm x 101.6mm] ,

Standard - 2" x 2"

Panel Thickness Material

Max: 60" x 120"

[1524mm x 3048mm] [50.8mm x 50.8mm]; (Variable Between Rows)

5/8" Standard [15.9mm] [ ETL only ]

3/8" Compact [9.5mm] [ ETL + CE ]

Expanded PVC - White or Custom Colors with Clear Acrylic Protective Cover

ABS Plastic - White or Custom Colors with Clear Acrylic Protective Cover

Operating Ambient Temperature

-22° to 104° F

Weight

3.25 lbs./sq. ft. [15.9 k/sq. m]

Mounting

Through Bolt in Pre-drilled Holes, T-Bar, Aircraft Cable

Diffusion

Integrated Polycarbonate Layer, Optional Stand-off Diffusor

Driver Type

Constant Voltage

Input Voltage

24V DC

Applied LED

Nichia 757d

Power Consumption

2626 LED 8.0w/sq. ft. [86.0w/sq. m]

Dimming

0 -10 volt with Electronic Driver

Max Wattage per Tail

96w (approx. 36" x 36", or 324 LEDs) [approx. 914mm x 914mm]

Feed Wire

96" [2.44m] of Non Plenum-Rated, 16 AWG Wire [1.29mm2] No Connector; Plenum-Rated Wiring Optional

(UL 2108, 8750 & 962);

• Acrylic • Frosted Glass • Onyx • Stretched Fabric Ceilings Where Plenum Space Exceeds 5”

(On per project basis; see pages 2 & 3)

Based on 3500K LED

LED Spacing

Electrical

2400K

.80

Size Options

Life & | Warranty | Listings |

Per Project Binning

Based on 3500K Color Temperature

CCT

page 64

CCT Tolerance All 6 Bins

[-30° to 40° C ] (Standard Thickness)

2613 LED 4.0w/sq. ft. [83.0w/sq. m]

ELP-L can be fabricated in all shapes and sizes and for a range of lumen outputs and cavity depths. It is dimmable and available in eight color temperatures (2000K, 2400K , 2700K, 3000K, 3500K , 4000K , 4500K or 5000K) with a CRI of 87. ELP-L Light Panel is available in two wattage/lumen options: the standard 8.0 watts per square foot (600 lm/sq. ft.) or new energy-saving version 4.0 watts per square foot (300 lm/sq. ft.). Both ELP-L versions are also available in a variable-temp version that uses two CCTs and allows color temperature adjustment through separate controls. Visit the VLT website for application photos & most recent IES files, LM79 & LM80 reports.

; RoHS Compliant (if specified); LM79, LM80; Title 24 Pending;

IP54 (Dry/Damp)

100,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty

MADE in USA

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W203

ELP-L Light Panel IP54 | This highly customizable product is ideal for backlighting applications (dry or damp locations). Features Nichia LEDs with either Standard 2626 LED Board (600 lm/sq. ft.1, 8.0 w/sq. ft., 85 CRI) or Low Output 2613 LED Board (300 lm/sq. ft.1, 4.0 w/sq. ft., 85 CRI). In Standard “A” spacing, LEDs are arranged in a 2”x 2” grid with one pre-drilled mounting hole every 16” [406.4mm] OC. Where cavity depth allows, LEDs can optionally be spaced in 2”x 3” or 2”x 4” configurations (mock-up with intended diffuser material recommended to determine best LED spacing for your project). ELP-L is also available in 2” x 1” spacing with variable color mixing option (see Note below). Standard finished thickness is 5/8” [15.9mm]. Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. To order standard shapes (squares, rectangles) and standard LED placements, use the configurator below. For custom shapes, custom LED placements, or custom mounting hole placements, please contact the VLT factory. Note: for 2”x 1” spacing with variable color temperature mixing (LED Spacing Option “E”), each CCT will have a separate wire tail for dimming control; please specify two CCT’S.

Note: When specifying Standard 2"x 2" LED spacing, dimensions for square or rectangular panels should be rounded down to the next even 2"; additional fractions will not add LEDs or lumen output to the panel. Rounding down the overall size of the panels may also provide valuable “wiggle room” at the installation site.

ELP - L - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED 600 lm/sq. ft. 2626 8.0 w/sq. ft. 85 CRI

300 lm/sq. ft. 1 2613 4.0 w/sq.ft. 85 CRI

Based on Standard (A) LED Spacing

CCT

Panel Height (in.)

Panel Width (in.)

20 2000°K

Up to 120" [1524mm]

Up to 60" [3048mm]

24 2400°K

Options & Accessories ETL CE

27 2700°K

30 3000°K 35 3500°K 40 4000°K 45 4500°K 50 5000°K 2

LED Spacing

Wire Length (ft.)

2" x 2" [50.8mm x 50.8mm] (Standard)

2" x 3" [50.8mm x 76.2mm]

96’’ [2.44m] Standard (Option up to 30’ [9.14m])

2" x 4" [50.8mm x 101.6mm]

2" x 1" [50.8mm x 25.4mm] (Specify 2 CCTS)

WE_

With “E” LED Spacing, please specify 2 CCT’s (i.e. 27/40 )

CE Marked (RoHS) 3/8" [9.5mm] Compact Substrate 3 (instead of standard 5/8" [15.9mm]

Wire Exit Location (WE2 standard)

Plenum-Rated Wiring

Diffuser Panel

Substrate Color

(for mounting of both Light Panel and diffuser panel)

SG AF

2626 LED Only; Consult Factory for 2613 Data

ETL Listed

Stand-offs

Suspension Grips (hardware for suspended applications)

Aluminum Framing (adds rigidity for larger panels)

Available only for wall-mount applications in sizes less than 24"x24" [609.6mm x 609.6mm]

Spacing

Lumens/sq. ft

Lumens/sq. meter

Power Consumption

2’" x 2" [50.8mm x 50.8mm]

600 lm

6456 lm

8.0 w/sq. ft.

2" x 3" [50.8mm x 76.2mm]

450 lm

4842 lm

6.0 w/sq. ft.

2" x 4" [50.8mm x 101.6mm]

300 lm

3228 lm

4.0 w/sq. ft.

2" x 1" [50.8mm x 25.4mm]

1200 lm

12,912 lm

16.0 w/sq. ft.

Note: lm/sq.ft. data for 2" x 1" spacing (Option “E”) is for both CCTs at full brightness; to adjust CCT, one board must be dimmed, reducing total lumen output.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 65

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W213

| LED Basics |

ELP-G Light Panel Specifications LED Board

Power Consumption

Lumen Output

LED Efficacy

CRI

1104

4.0 w/sq. ft1

576 lm/sq. ft.*

138 lm/w

[43.0w/sq. m]

[6198 lm/sq. m]

*Based on 4000K Color Temperature

Life & | Warranty | Listings |

Electrical

Mechanical

| Efficacy |

Optical

Lumen Output

page 66

2000K

CCT

CCT Tolerance

2400K

2700K

All 6 Bins

Per Project Binning

± 124°K

Micro ± 60°K

Does not include driver losses

3000K

3500K

4000K

4500K

5000K

1866 lm 1866 lm 1866 lm 2142 lm 2142 lm 2304 lm 2304 lm 2304 lm [5020 lm] [5020 lm] [5020 lm] [5764 lm] [5764 lm] [6198 lm] [6198 lm] [6198 lm]

(2’ x 2’ Panel) [1m x 1m Panel]

Light Output Conversion

.81

.93

Beam Angle/Field Angle

116° Beam Angle /140° Field Angle

CRI

CCT Tolerance

± 60K

1.0

(On per project basis; see pages 2 & 3)

Based on 4000K LED

LED Efficacy

138 lm/w

Fixture Efficacy

144 lm/w

Luminaire Efficacy

130 lm/w

Size Options

Min: 3" x 3"

LED Spacing

1" x 1" [25.4mm x 25.4mm] (nominal)

Panel Thickness

5/8" Standard [15.9mm]

Material

Expanded PVC - White with Clear Removable Lexan Protective Cover

Operating Ambient Temperature

-22° to 104° F

Weight

2.66 lbs/sq. ft [13 kg/sq. m] with removable cover 1.96 lbs/sq. ft [9.6 kg/sq. m] without

Mounting

Through Bolt in Pre-drilled Holes

Diffusion

None

Driver Type

Constant Voltage

Input Voltage

24V DC

Applied LED

Nichia 757d

Power Consumption

4.0w/sq. ft.

Dimming

0 -10 volt with Electronic Driver or MeanWell HLG

Max Wattage per Tail

96w (approx. 50" x 50", or 324 LEDs) [approx. 1250mm x 1250mm]

Feed Wire

96" [2.44m] of Non Plenum-Rated, 18 AWG Wire [1.29mm2] No Connector; Plenum-Rated Wiring Optional

(2108, 8750 & 962);

Max: 60" x 120"

[46.2mm x 76.2mm] , [1524mm x 3048mm]

[-30° to 40° C ]

ELP-G Light Panel EssentialLEDs® ELP-G Light Panel is a specialty backlighting product developed to provide bright and even backlighting for particulary demanding applications, including: • Stretched Fabric Ceilings • High Efficacy Needs • Minimal Cavity Space ELP-G features on-board power supply regulation on each individual ELP-G module, allowing panels to achieve the very high efficiency level of 144 lumens per watt (576 lumens per square foot*) ELP-G can be fabricated in all shapes and sizes. It is dimmable and available in eight color temperatures (2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K OR 5000K) with a CRI of 87. Visit the VLT website for application photos & most recent IES files, LM79 & LM80 reports.

MADE in USA [43.0w/sq. m]

(2108, 8750) only ELP-G/T, ELP-G/B;

RoHS Compliant (if specified); LM79, LM80;

Title 24 Pending 100,000 (L80) HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 12.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W213

ELP-G Light Panel IP20 | This product is ideal for backlighting stretched fabric ceilings in dry locations. Includes Nichia LEDs (576 lm/sqft*, 4.0 w/sqft, 84 CRI) arranged in a 1”x1” (nominal) grid with one pre-drilled mounting hole every 16” [406.4mm] OC. Standard finished thickness is 5/8” [15.9mm]. Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. To order standard shapes (squares, rectangles) and standard LED placements, use the configurator below. For custom shapes, custom LED placements, or custom mounting hole placements, please contact the VLT factory. Edge to Edge: due to ELP-G’s minimum LED module size of 3”x 3”, please specify panel heights and widths divisible by 3 to achieve edge to edge LEDs.

ELP - G- _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT*

Panel Height (in.)

Panel Width (in.)

576 lm/sq. ft. 1104 4.0 w/sq. ft 84 CRI

20 2000°K

Up to 120" [1524mm]

Up to 60" [3048mm]

24 2400°K 27 2700°K 30 3000°K

Wire Length (ft.)

35 3500°K 40 4000°K

LED Spacing

45 4500°K 50 5000°K

Listings ETL

ETL Listed

UL Listed

CE Marked (RoHS)

96’’ [2.44m] Standard (Option up to 30’ [9.14m])

1" x 1" [25.4mm x 25.4mm]

page 67

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W213

ELP-G Modules for DIY Installation Individual ELP-G modules with 1" x 1" LED spacing can be purchased for mounting directly into your millwork or displays. All specifications and color temperature options are available. These versatile lighting units are offered in two versions; please note the difference: IP20 | Tiles: these LED Tiles are mounted onto a 5/8" substrate with a ¼" margin all around. ELP-G/T modules can be butted up against each other and will automatically maintain perfect spacing for even light output in any arrangement you desire. Features Nichia 157 LEDs (576 lm/sq. ft.*, 4.0 w/sq. ft., 84 CRI) arranged in a 1"x1" (nominal) grid. Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. Each tile ships with a protective cover which must be removed during installation. Includes 2" interconnect wires for daisy-chaining tiles together. Mix and match from the 6 module sizes below to configure your custom lighting solution.

ELP-G/T - 1104 - ________ - ________ - ________

ELP-G/T

CCT*

Module Size

20 2000°K

1212 12" x 12" (4w)

24 2400°K

1206 12" x 6" (2w)

27 2700°K

1203 12" x 3" (1w)

30 3000°K

0606 6" x 6" (1w)

35 3500°K

0603 6" x 3" (.50w)

40 4000°K

0303 3" x 3" (.25w)

Listings ETL

ETL Listed

UL Listed

CE Marked

45 4500°K 50 5000°K

IP20 | Boards: these LED boards consist of the LED Board ONLY with no backing material or preset outer spacing margin. Features Nichia LEDs (576 lm/sqft*, 4.0 w/sqft, 84 CRI) arranged in a 1"x1" (nominal) grid. Available color temperatures of 2000K, 2400K, 2700K, 3000K, 3500K, 4000K, 4500K and 5000K. All LEDs include ±60K Micro Binning. No protective cover provided. Includes 2" interconnect wires for daisy-chaining tiles together. Mix and match from the 6 module sizes below to configure your custom lighting solution.

ELP-G/B - 1104 - ________ - ________ - ________

ELP-G/B

CCT*

page 68

Module Size

20 2000°K

1212 11.5" x 11.5" (4w)

24 2400°K

1206 11.5" x 5.5" (2w)

27 2700°K

1203 11.5" x 2.5" (1w)

30 3000°K

0606 5.5" x 5.5" (1w)

35 3500°K

0603 5.5" x 2.5" (.50w)

40 4000°K

0303 2.5" x 2.5" (.25w)

Listings ETL

ETL Listed

UL Listed

CE Marked

45 4500°K

*Lm/sq. ft. based on 4000K CCT

50 5000°K

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X143

Light Panel Options & Accessories Substrate Thickness ELP-L: Standard thickness for EssentialLEDs® ELP-L Light Panel is 5/8", consisting of a 1/2" substrate plus 1/8" cover, bonded together [12.7mm substrate plus 3.2mm clear cover = 15.9mm]. For small pieces of light panel in wall-mounted applications (24" x 24" or less) [609.6mm x 609.6mm], the 3/8" Compact version may be sufficiently robust (1/4" substrate plus 1/8" cover) [6.4mm substrate plus 3.2mm cover = 9.5mm]. Please consult with the VLT factory for recommendations. ELP-G: Standard thickness for ELP-G Light Panel is 5/8" [15.9mm]. ELP-G ships with a removable protective cover with a thickness of 1/8" [3.175mm].

Wire Exits & Options Wire exits can be located at any place along the Light Panel’s edges, or from the back of the panel (ELP-L Only); illustration at right shows common exit designations. Unless otherwise specified, WE2* is the standard wire exit; please provide a sketch for custom exit locations. WE1 exits will be located as close to center as possible, depending on LED board layout. Maximum wattage per driver is 96 watts, so larger pieces of Light Panel will often require multiple wire exits. Standard termination is 10’ [3.05m] of plenum rated 16-gauge [1.02mm2] wire, no connector ; up to 30’ [9.14m] is available as an option.

WE3 Width Center WE1 Back Center (ELP-L Only)

WE2* Height Center (Standard)

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

Mounting ELP-L & ELP-G: For wall-mount installations, EssentialLEDs® Light Panels install with #8 screws (provided by others; length will vary depending on mounting surface) and #8 disc washers (included with panel) to provide even load distribution. For a clean finish, white adhesive “dot" labels are provided to cover heads of #8 screws. ELP-G ships with a removable clear cover to protect the LEDs during installation ; clear cover should be discarded after mounting with #8 screws Disc Washer Pre-drilled Hole

ELP-L Diffuser Panel Acrylic diffuser panels are available to match the size and shape of your ELP-L LED Light Panel. Standard diffuser panel is fabricated using .118" [2.99mm] Opal 3 white acrylic. We can also fabricate diffuser panels using alternative acrylics, decorative resins or other materials per your specification. Please contact VLT factory for other options. In most cases, diffuser panels must be mounted a minimum of 2" from the Light Panel, page 69 and can be supported using stand-off hardware (see page 65) or other structure provided by the application. When mounting diffuser panel with stand-off hardware, spacing of every 16" - 24" [400mm - 600mm], OC is recommended.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X143

ELP-L Stand-off Hardware For Use with Acrylic Diffuser For wall-mount applications, aluminum stand-offs provide a simple way to mount materials being backlit. Stand-offs provide a fixed 2" [12.7mm] separation that allows full blending of the LED light points. Stand-off hardware is typically placed every 16" - 24" [400mm - 600mm] OC. See illustration below. Integrated Diffuser Layer White Rigid PVC

Substrate Installation with Diffuser Panel Using Stand-off Hardware

Pre-drilled Mounting Holes 1 per 16” OC (standard))

Diffuser Panel

Stand-offs 90º

(Illustration uses frosted glass diffuser; visible dot pattern is design choice)

5/8"

ELP-L Suspension Hardware LED Light Panel can be used as general overhead lighting when combined with a T-Bar system (provided by others) or suspended by a combination of specialized grips and aircraft cable. See illustration below.

Suspended Mount Using Cable & Grips (Aluminum Framing Required)

Aircraft Cable

Stand-off

Diffuser Panel

ELP-L Aluminum Framing When large pieces of ELP-L LED Light Panel are used in suspended applications, aluminum framing is available to provide added rigidity and support for the PVC substrate to prevent bowing of the panel. Aluminum framing will add a slight raised edge (1/16" [1.6mm]) around the periphery of the panel, but will not alter the height and width dimensions of the panel. The framing itself cannot be used to support the light panel in a suspended application; cable attachments must penetrate the panel substrate (see photo above).

ELP-L Substrate Color page 70

Depending on your application, a substrate color other than the standard white may be desirable for your ELP-L LED Light Panel. Expanded PVC plastic comes in a variety of colors (Black, Gray, Beige, Purple, Burgundy, Red, Orange, Yellow, Green & Blue); please contact factory for samples.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Notes: __________________________________________________

______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 71

Visual Lighting Technologies

EssentialLEDs

CONSTANT VOLTAGE DRIVERS

driver table Wattage

Output Voltage

Can Be Used for Non Dimming Applications

VLT HMLD

48w

24v

with Enclosure

96w

24v

Page 74

3 x 96w

24v

16w

24v

25w

24v

60w

24v

90w

24v

MEAN WELL

40w

24v

80w

24v

Page 76

100w

24v

120w

24v

MEAN WELL

150w

24v

185w

24v

Page 75

240w

24v

320w

24v

30w

24v

75w

24v

96w

24v

96w /DIM

24v

with Enclosure

96w

24v

eldoLED 0-10v

30w

150mA - 1400mA

50w

150mA - 1400mA

Page 79

100w

200mA - 1050mA

30w

150mA - 1400mA

50w

150mA - 1400mA

100w

200mA - 1050mA

eldoLED

30w

200mA - 1050mA

50w

200mA - 1050mA

Page 80

100w

200mA - 1050mA

350

10w

350

18w

350

700

Lightech 700mA

10w

700

Page 83

18w

700

36w

700

MEAN WELL CLASS 2 Page 77

CLASS 2

CLASS 1

OSRAM

(US, Can, MEX)

Page 78

CONSTANT CURRENT DRIVERS

with Enclosure

page 72

For Critically Important Applications, VLT Recommends the Purchased of One or More Spare Drivers.

eldoLED 0-10V Page 81

DMX

Lightech 350mA Page 82

Self-Contained 0 - 10v Dimming

Magnetic Low-Voltage Dimming

Requires OT Dim Module to Dim

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Spare Drivers Will Allow the Application to Remain Operational if a Driver Must Be Repaired or Replaced. Listing (UL / ETL)

IP Rating & Enclosure

UL / ETL

IP67, Nema 3R Box Included

UL / ETL

IP67, Nema 3R Box Included

UL / ETL

IP67, Nema 3R Box Included

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

Dims to Zero

Requires Relay Module for Full Off

Phase Control Dimming

DMX Dimming

Nema 3R Enclosures are Ready to Install and Do Not Require a J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

UL / ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

UL g

IP66, Nema 3R Box Included IP67, Nema 3R Box Included

IP67, Nema 3R Box Included

ETL

Damp/Dry, Requires J-Box

ETL

Damp/Dry, Requires J-Box

ETL

Damp/Dry, Requires J-Box

ETL

Damp/Dry, Requires J-Box

ETL

Damp/Dry, Requires J-Box

ETL

Damp/Dry, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

ETL

IP67, Requires J-Box

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 73

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y023

Class 2 VLT Hybrid Magnetic Linear Drivers For use with EssentialLEDs® Linear and ELP-L Light Panel products; NOT for use with ELP-G Light Panel. All magnetic drivers are not the same, and the differences can impact the performance and longevity of your LED system. Standard magnetic drivers labeled “24v DC" utilize rectifiers to produce the 24v DC current; current from these models may include an AC component that can result in actual peak voltages ranging as high as 50v DC. These voltage levels will cause permanent damage to EssentialLEDs® products. VLT Hybrid Magnetic Linear Drivers feature hybrid linear drive circuits that produce maximum regulated voltage not greater than 24.3v DC; these are the ONLY magnetic drivers guaranteed for use with EssentialLEDs® products. Compatible with all magnetic low-voltage forward phase dimmers and fully potted to dim without humming or buzzing. VLT HMLD drivers are UL Listed Class 2 Power Supplies and outdoor rated for wet locations (UL 1012 & UL1013). Complete with knock-outs and mounting brackets for easy installation, indoors or out. Use of any other magnetic drivers will void product warranty. Manufactured in Southern California. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 48W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Manufacturer: Listings:

96W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Manufacturer: Listings:

3 X 96W 24V DC Load: Input Voltage: Output Voltage: Dimensions:

page 74

1-48VA 120 / 240 / 277 VAC 50/60Hz 24V DC ±1% 11.25"L x 3.37"W x 3.25"H [285.8mm L x 85.6mm W x 82.6 mm] 1 50/60 Hz 6 lbs. [2.72 kg] 140° F [60° C] NEMA 3R Visual Lighting Technologies UL Listed (UL1012, UL1310), ETL Listed (UL 2108, UL 8750, UL 962)

Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Manufacturer: Listings:

1 -96VA 120 / 240 / 277 VAC 50/60 Hz 24V DC ±1% 11.25"L x 3.37"W x 3.25"H [285.8mm L x 85.6mm W x 82.6 mm] 1 50/60 Hz 7.8 lbs. [3.54 kg] 140° F [60° C] NEMA 3R Visual Lighting Technologies UL Listed (UL1012, UL1310), ETL Listed (UL 2108, UL 8750, UL 962) SPECIFICATIONS 1 -288VA 120 / 240 / 277 VAC 50/60 Hz 24V DC ±1% 12.12"L x 8.43"W x 4.43"H [307.8mm L x 214.1mm W x 112.5 mm] 3 50/60 Hz 20.4 lbs. [9.25 kg] 140° F [60° C] NEMA 3R Visual Lighting Technologies UL Listed (UL1012, UL1310), ETL Listed (UL 2108, UL 8750, UL 962)

CAT. NO. HMLD - 48 - 24DC -

120 240 277

Description: Constant voltage driver from VLT, 48w, 2A; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP" to specify with optional cord & plug for display case application. NEMA 3R case; indoor/ outdoor rated (non-submersible). UL Listed Class 2 power supply.

Made in USA CAT. NO. HMLD - 96 - 24DC -

120 240 277

Description: Constant voltage driver from VLT, 96w, 4A; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP" to specify with optional cord & plug for display case application. NEMA 3R case; indoor/ outdoor rated (non-submersible). UL Listed Class 2 power supply.

Made in USA CAT. NO. HMLD - 288 - 24DC -

120 240 277

Description: Constant voltage driver from VLT, 3 x 96w, 4A each; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output, 96w each (meets Class 2 output limits). Conduit access wiring compartment for wall mounting. UL Listed. Add “-CP" to specify with optional cord & plug for display case application. NEMA 3R case; indoor/outdoor rated (non-submersible). UL Listed Class 2 power supply.

Made in USA

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y063

Class 1 Electronic Dimming Drivers from Mean Well ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. Self-contained dimming drivers marked with red dot (n ) require Relay Module (AC - PWR - RLY) to reach full “off" position. n 120W 24V DC

SPECIFICATIONS Load: 1 - 120VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC ±1.0% Dimensions: 8.66"L x 2.68"W x 1.53"H [219.9mm L x 68.1mm W x 38.6mm H] Weight: 2 lb. 7.50 oz [0.907 kg] Max Ambient Temp.: 158° F [70° C] IP Rating: IP65/Damp Listings: ETL Listed (UL 2108, UL 8750), CE Manufacturer: Mean Well SPECIFICATIONS

n 150W 24V DC

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1 - 150VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.98"L x 2.68"H x 1.53"H [228.1mm L x 68.1mm W x 38.9mm H] 2 lb. 8.56 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

SPECIFICATIONS

n 185W 24V DC

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-185VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.98"L x 2.68"W x 1.53" H [228.1mm L x 68.1mm W x 38.9mm H] 2 lbs. 8.6 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

SPECIFICATIONS

n 240W 24V DC

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: n 320W 24V DC

1 - 240w 90-305VAC 50/60Hz 24V DC ±1.0% 9.61"L x 2.68"W x 1.53" H [244.1mm L x 68.1mm W x 38.9mm H] 2 lbs. 13.85 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1 - 320w 90-305VAC 50/60Hz 24V DC ±1.0% 9.92"L x 3.54"W x 1.72" H [251.9mm L x 90mm W x 44mm H] 4 lbs. 2.31 oz. [1.81 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

CAT. NO.

HLG - 120H

Description: Constant voltage 120 watt 24 volt LED driver from Mean Well; 1-120VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off" position. IP65/Damp.

CAT. NO.

HLG - 150H

Description: Constant voltage 150 watt 24 volt LED driver from Mean Well; 1-150VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off" position. IP65/Damp.

CAT. NO.

HLG - 185H

Description: Constant voltage 185 watt 24 volt LED driver from Mean Well; 1-185VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off" position. IP65/Damp.

CAT. NO. HLG - 240H Description: Constant voltage 240 watt 24 volt LED driver from Mean Well; 1-240VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off" position. IP65/Damp.

CAT. NO. HLG - 320H Description: Constant voltage 320 watt 24 volt LED driver from Mean Well; 1-320VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off" position. IP65/Damp.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 75

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y033

Class 2 Electronic Dimming Drivers from Mean Well

ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 40W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

80W 24V DC

1 - 40VA 90-305VAC 50/60Hz 24V DC ±1.0% 6.73"L x 2.42"W x 1.45"H 170.9mm L x 61.5mm W x 36.8mm H 1 lb. 9.7 oz [0.45 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

100W 24V DC

1 - 80VA 90-305VAC 50/60Hz 24V DC ±1.0% 7.70"L x 2.42"W x 1.52"H 195.6mm L x 61.5mm W x 36.8mm H 1 lb. 13.7 oz. [0.45 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-100VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.66"L x 2.68"W x 1.53" H 219.9mm L x 68.1mm W x 38.9mm H 2 lbs. 7.5 oz. [0.91 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

CAT. NO. HLG - 40H

Description: Constant voltage 40 watt 24 volt LED driver from Mean Well; 1-40VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

CAT. NO. HLG - 80H

Description: Constant voltage 80 watt 24 volt LED driver from Mean Well; 1-80VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

CAT. NO. HLG - 100H

Description: Constant voltage 100 watt 24 volt LED driver from Mean Well; 1-100VA load; 90305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

page 76

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y093

Class 2 Electronic Dimming Drivers from Mean Well

ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 16W 24V DC

25W 24V DC

40W 24V DC

60W 24V DC

90W 24V DC

SPECIFICATIONS Load: 1-16VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 5.82"L x 1.57"W x 1.25"H 148mm L x 40mm W x 32mm H Weight: 7.4oz [0.21kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-25VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 5.82"L x 1.57"W x 1.25"H 148mm L x 40mm W x 32mm H Weight: 12.7oz [0.36kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-40VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.39"L x 1.69"W x 1.25"H 162.5mm L x 43mm W x 32mm H Weight: 15.5oz [0.44kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-60VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.39"L x 1.69"W x 1.25"H 162.5mm L x 43mm W x 32mm H Weight: 15.9oz [0.45kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-90VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.33"L x 2.40"W x 1.41"H 161mm L x 61mm W x 36mm H Weight: 1 lb. 8.7oz [0.7kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well

CAT. NO.

LPF-16

Description: Constant voltage 16 watt 24 volt LED driver from Mean Well; 1-16VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO.

LPF-25

Description: Constant voltage 25 watt 24 volt LED driver from Mean Well; 1-25VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO.

LPF-40

Description: Constant voltage 40 watt 24 volt LED driver from Mean Well; 1-40VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO. LPF-60

Description: Constant voltage 60 watt 24 volt LED driver from Mean Well; 1-60VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO. LPF-90

Description: Constant voltage 90 watt 24 volt LED driver from Mean Well; 1-90VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 77

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y043

Electronic Drivers from Osram Electronic drivers can be dimmed with the addition of a 0-10 volt dimmer module (AC - PWR - DIM). Self-contained dimming drivers marked with red dot (n ) require Relay Module (AC - PWR - RLY) to reach full “off" position. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 30W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

SPECIFICATIONS

75W 24V DC

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

96W 24V DC

n 96W24V DC - DIMMING DRIVER

1-96VA 120-277V 50/60Hz 24V DC ±1% 9.48"L x 1.68"W x 1.17"H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750), UL, CUL Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-96VA 120-277V 50/60Hz 24V DC ± 1% 9.48"L x 1.68"W x 1.17"H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750) Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions:

page 78

1 -75VA 120-277V 50/60Hz 24V DC ±2% 9.48"L x 1.68"W x 1.17"H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750) CSA Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

96W 24V DC

1 - 30VA 120v 50/60Hz 24V DC ±5% 5.91"L x 1.6"W x 1.2"H [150mm L x 40.6mm W x 30.4mm H] 10.08 oz. [0.28kg] 104° F [40°C] Dry ETL Listed (UL 2108, UL 8750, UL 962) Osram

Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-96VA 120-277V 50/60Hz 24V DC ±0.5% 12.31" L x 2.53" W x 1.66" H [312.9mm L x 64.5mm W x 42.4mm H] 2 lb. 0.09 oz [0.91 kg] 158 F° [70° C] Wet, IP66 CE, UL Listed Osram

CAT. NO. OT30/120/24/CORD Description: Constant voltage 30 watt 24 volt LED driver from Osram; 1-30VA load; 120v 50/60Hz input; 24V output ±5%; dry rated. On-cord on/off switch included.

CAT. NO. OT75W/24V/UNV Description: Constant voltage 75 watt 24 volt LED driver from Osram; 1-75VA load; 120v-277v 50/60Hz input; 24V output ± 2%; damp rated.

CAT. NO.

OT96W/24V/UNV

Description: Constant voltage 96 watt 24 volt LED driver from Osram; 1-96VA load; 120v-277v 50/60Hz input; 24V output ± 1%; damp rated.

CAT. NO. OT96W/24V/UNV/DIM Description: Constant voltage 96 watt 24 volt driver from Osram; 1-96VA load, 120v-277v 50/60Hz input; 24V output DC; ±1%; driver with self-contained 0-10v dimming capability. Control device required; requires Relay Module (AC - PWR - RLY) to reach full“off" position. Damp rated.

CAT. NO. OT96W/24V/UNV/JBX Description: Constant voltage 96 watt 24 volt LED driver from Osram; 1-96VA load; 120-277v 50/60Hz input; 24V output ± 0.5%; wet rated.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y153

Constant Currrent eldoLED Drivers with Junction Box- 350/500/700/1050mA - Dimmable - 0-10V UL Listed class 2 power supplies. 30W SOLOdrive DIMMABLE 0-10V W/ JUNCTION BOX

SPECIFICATIONS

CAT. NO. SL0361S1-

-JB 350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Driver Manufacturer: Dimmable:

50W SOLOdrive DIMMABLE 0-10V W/ JUNCTION BOX

30W Total 120-277 V 50/60Hz One Channel 2-55 V 9.70"L x 4.07"W x 2.93" H [247mm L x 103mm W x 75mm H] 38 oz. [1078 g] 122° F [50° C] Damp/Dry UL Listed eldoLED Yes, 0-10V

SPECIFICATIONS

500 Description: Single Channel 700 Constant Current 30 watt LED 1050 Driver from EldoLED, Mounted CUST in Junction Box for Hardwiring, Factory programmable output from 200mA to 1050mA; 30 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 1 Channel, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. UL listed class 2 power supply. For custom drive current, indicate mA rating between 200-1050 mA.

CAT. NO. SL0561S1-

-JB 350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Driver Manufacturer: Dimmable:

100W SOLOdrive DIMMABLE 0-10V W JUNCTION BOX

50W Total 120-277 V 50/60Hz Dual Channel 2-55 V each 9.70"L x 4.07"W x 2.93" H [247mm L x 103mm W x 75mm H] 40 oz. [1133 g] 122° F [50° C] Damp/Dry UL Listed eldoLED Yes, 0-10V

SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Driver Manufacturer: Dimmable:

100W Total 120-277 V 50/60Hz Quad Channel 2-55 V each 13.60"L x 4.07"W x 2.93" H [346mm L x 103mm W x 75mm H] 64 oz. [1814 g] 122° F [50° C] Damp/Dry UL Listed eldoLED Yes, 0-10V

500 Description: Dual Channel 700 Constant Current 50 watt LED Driver from EldoLED, Mounted 1050 in Junction Box for Hardwiring, CUST Factory programmable output from 200mA to 1050mA; 50 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 2 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. UL listed class 2 power supply. For custom drive current, indicate mA rating between 200-1050 mA. CAT. NO. SL1060S1-

-JB 350 500 700 1050 CUST

Description: Quad Channel Constant Current 100 watt LED Driver from EldoLED, Mounted in Junction Box for Hardwiring, Factory programmable output from 200mA to 1050mA; 100 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 4 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. UL listed class 2 power supply. For custom drive current, indicate mA rating between 200-1050 mA.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 79

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y113

eldoLED Drivers - 350/500/700mA - Dimmable - DMX ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 50W POWERdrive DIMMABLE DMX

SPECIFICATIONS

CAT. NO. PW0562S1350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable: 100W POWERdrive DIMMABLE DMX

50W 120-277 V 50/60Hz 2-55 V 4.68"L x 2.99"W x 1.18" H [119mm L x 76mm W x 30mm H] 12 oz. [350 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, DMX SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W 120-277 V 50/60Hz 2-55v 8.64"L x 3.15"W x 1.18" H [220mm L x 80mm W x 30mm H] 31 oz. [880 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750) eldoLED Yes, DMX

Description: Constant current 50 500 watt LED Driver from EldoLED, DMX 700 Controllable, 3 channels (wattage can be dedicated to a single channel or spread across all 3 channels), Factory programmable output from 200mA to 1050mA; 50 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output . Full Dimming from 100% to 0%. Damp/Dry Rated. ETL listed.

CAT. NO. PWR106S1350 500 700

Description: Constant current 100 watt LED Driver from EldoLED, DMX Controllable, 3 channels (wattage can be dedicated to a single channel or spread across all 3 channels), Factory programmable output from 200mA to 1050mA; 100 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output . Full Dimming from 100% to 0%. Damp/Dry Rated. ETL listed.

page 80

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y103

Constant Currrent eldoLED Drivers - 350/500/700mA - Dimmable - 0-10V ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 30W SOLOdrive DIMMABLE 0-10V

SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

50W SOLOdrive DIMMABLE 0-10V

30W Total 120-277 V 50/60Hz Single Channel 2-55 V each 5.12"L x 2.83"W x 1.10" H [130mm L x 72mm W x 28mm H] 10 oz. [284 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, 0-10V

SPECIFICATIONS

CAT. NO. SL0361S1350 500 700

Description: Single Channel Constant Current 30 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 30 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 2 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed.

CAT. NO. SL0561S1350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W SOLOdrive DIMMABLE 0-10V

50W Total 120-277 V 50/60Hz Dual Channel 2-55 V each 5.12"L x 2.99"W x 1.18" H [130mm L x 76mm W x 30mm H] 12 oz. [350 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, 0-10V

SPECIFICATIONS

Description: Dual Channel Constant 500 700 Current 50 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 50 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 2 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed.

CAT. NO. SL1060S1350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W Total 120-277 V 50/60Hz Quad Channel 2-55 V each 8.64"L x 3.15"W x 1.18" H [220mm L x 80mm W x 30mm H] 31 oz. [880 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750) eldoLED Yes, 0-10V

Description: Quad Channel Constant 500 700 Current 100 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 100 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 4 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed.

page 81

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y123

Constant Currrent Drivers - 350mA ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 6W 350MA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimming:

10W 350mA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: Listings: Manufacturer: Dimming:

18W DC 350mA DIMMABLE

6W 120-277V 50/60Hz 2-20V 1.77"L x 1.77"W x 0.98"H [45mm L x 45mm W x 25mm H] 4 oz. [0.25kg] 122° F [50°C] IP67 ETL Listed (UL, 2108, UL 8750) GE Lighting [Lightech] No

10 W 120-240V 50/60Hz 3-29V 3.94"L x 1.57"W x 1.05"H [100mm L x 40mm W x 27mm H] 4 oz. [0.09 kg] 122° F [50°C] ETL Listed (UL, 2108, UL 8750) GE Lighting [Lightech] No

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimming:

18w 108 -132V 50/60Hz 5.6 - 42 V 7.8"L x 0.73"W x 1.18"H [198mm L x 44mm W x 30mm H] 9.8 oz. [0.28 kg] 122° F [50°C] IP67 ETL Listed (UL, 2108, UL 8750) Lightech Yes, with Trailing edge, down to 10%

CAT. NO.

66864 US

Description: Constant current 6 watt 350mA LED Driver from GE Lighting (Lightech); 6 VA load; 120 – 277v 50/60Hz input; 350mA 2 – 20v Output +/1.0%. Non Dimmable. IP67 Rated. ETL listed. For use in the USA.

CAT. NO.

66867 US

Description: Constant current 10 watt 350mA LED Driver from GE Lighting (Lightech); 10 VA load; 120 – 240v 50/60Hz input; 350mA 3 – 29v Output +/- 1.0%. Non Dimmable. IP20 Rated. ETL listed. For use in the USA.

CAT. NO.

66885 US

Description: Constant current 18 watt 350mA LED Driver from GE Lighting (Lightech); 18 VA load; 108 – 132v 50/60Hz input; 350mA 5.6 – 42v Output +/1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

page 82

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y133

Constant Currrent Drivers - 700mA ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs® Linear or Light Panel system. 6W DC 700mA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

18W DC 700mA Aluminum - Dimmable

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

LED 36W DC 700mA Aluminum - Dimmable

6W 120-277 V 50/60Hz 2.0 - 11.0V 1.77"L x 1.77"W x .98" H [45mm L x 45mm W x 25mm H] 4 oz. [0.11 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] No

18W 120-277 V 50/60Hz 4-26V 6.02"L x 1.57"W x 1.22" H [133mm L x 40mm W x 30.5mm H] 12 oz. [0.34 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] Yes, with Trailing edge, down to 10%

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

36 W 120-277 V 50/60Hz 4-42V 6.02"L x 1.57"W x 1.20" H [153mm L x 40mm W x 31mm H] 12 oz. [0.34 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] Yes, with Trailing edge, down to 10%

CAT. NO. 66866

Description: Constant current 6 watt 700mA LED Driver from GE Lighting (Lightech); 6 VA load; 120 – 277v 50/60Hz input; 700mA 2 – 11v Output +/- 1.0%. Non Dimmable. IP67 Rated. ETL listed. For use in the USA.

CAT. NO. 66884

Description: Constant current 18 watt 700mA LED Driver from GE Lighting (Lightech); 18 VA load; 120 – 277v 50/60Hz input; 700mA 4.0 – 26v Output +/- 1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

CAT. NO. 66904

Description: Constant current 36 watt 700mA LED Driver from GE Lighting (Lightech); 36 VA load; 120 – 277v 50/60Hz input; 700mA 4.0 – 42v Output +/- 1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

page 83

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X153

Nema Boxes/Enclosures 2460 NEMA BOX

SPECIFICATIONS

CAT. NO. ELL-AC-NB-

- 58 RC SF

Dimensions: 24"L x 60"W x .6"D [609mm L x 1524mm W x 152mm D] Material: Steel Weight: 185 lbs [84 kg] Capacity: Holds 15 - 320w HLG Drivers Contact factory for other configurations Listings: ETL

2484 NEMA BOX

SPECIFICATIONS

Description: Grey powder-coated NEMA 1 steel enclosure for storage of LED drivers; Holds up to 15 320w HLG drivers on interior racks provided. For recessed (RC) or surface mount (SF) installation with knock-outs for inbound and outbound electrical. Lever handle. ETL listed to UL 50 Type 1.

CAT. NO. ELL - AC - NB -

- 84 RC SF

Dimensions: 24"L x 84"W x 6" D [609mm L x 2133mm W x 152mm D] Material: Steel Weight: 270 lbs [122.5 kg] Capacity: Holds 25 - 320w HLG Drivers Contact factory for other configurations Lisitngs: ETL

Description: Grey powder-coated NEMA 1 steel enclosure for storage of LED drivers; Holds up to 25 320w HLG drivers on interior racks provided. For recessed (RC) or surface mount (SF) installation with knock-outs for inbound and outbound electrical. Lever handle. ETL listed to UL 50 Type 1.

page 84 For large installations, NEMA boxes provide protected storage, ventilation, and easy access for multiple LED drivers. Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y143

Dimming & Controls Notes on Dimming and Controls: EssentialLED® products can be dimmed using any of the self-contained dimming drivers offered on the previous pages, OR by combining Osram’s 0-10v Dimming Module with any of our constant voltage electronic drivers. All self-contained dimming drivers (marked with a red dot n ) require a Relay Module (AC - PWR - RLY) to reach full “off" position. Magnetic drivers can be dimmed using a standard magnetic low voltage wall dimmer. Whether you choose a self-contained dimming driver, or combine a 0-10v dimming module and standard driver, you will need a device to control the dimming effect. We offer the wall-mount Lutron Diva or a Local Dimming Controller that attaches directly to the driver unit.

Control & Interface Accessories 0 - 10V/ DMX DIMMING MODULE

SPECIFICATIONS Dimensions: 6.77" L x 1.65" W x 0.79" H [172mm L x 42mm W x 20mm H] Weight: 0.165lbs [74.84 grams] Nominal Input Voltage: 24 OT DIM Max.Output Power (W): 120w, 60w each output, 2 channels OT DMX Max.Output Power (W): 140w, 48w each output, 3 channels OT DIM Max Output Current per Channel (A): 2.5 A OT DMX Max Output Current per Channel (A): 2.0 A Output Frequency (Hz): 135 Input Voltage Range: 9.5 - 25v DC Dimming Range: 0 - 100% Control Current: 0.6 mA max. Temp. Range: 4° to 122°F [-20° to +50°C] Max. Case Temperature: 158°F [70°C] Manufacturer: Osram

LUTRON DIVA 0 - 10V CONTROL

SPECIFICATIONS Dimensions: 4.69"L x 0.94"W x 0.30"H [119mm L x 75mm W x 7.6mm H] Control: 0 -10v 30 mA Manufacturer: Lutron Finish Color: White

MOTION SENSOR

SPECIFICATIONS Dimensions: 3.00"L x 1.75" W x 1.38"H [76.2mmL x 44.5mmW x 34.9mmH] Material: Plastic Case

DOOR/DRAWER PRESSURE SWITCH

CAT. NO. AC - PWR DIM DMX

Description: 0 - 10v dimming module from Osram for use in conjunction with standard electronic drivers (Constant Voltage only); requires control device. Two outputs of 60w each, 120w max. See wiring diagram on page 80.

CAT. NO. AC - PWR - 4WF Description: Control device from Lutron for control of 0 - 10v dimming; can be used in conjunction with OT Dim module and standard electronic driver (Constant Voltage only) or with self-contained dimming drivers (Constant Voltage or Constant Current). Wall mount paddle switch with linear slide; uses low-voltage wiring for easy installation. White. CAT. NO. AC - PWR - MO Description: Mini PIR Motion Sensor switch automatically powers on LEDs for 1 to 10 minutes (variable setting); 6 amp maximum load; detection range of 15 feet, 60° from center of sensor. CAT. NO. AC - PWR - PSW

Dimensions: 1.50" L x 1.63" W x 0.56"H [38.1mm L x 41.3mm W x14.3mm H] Material: Plastic Case

Description: Pressure Switch mechanically connects/disconnects wire connection to automatically power LEDs when cabinet door or drawer is opened. Mount inside so that plunger is held in off position when door/drawer is closed.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 85

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y143

Control & Interface Accessories LOCAL DIMMING CONTROLLER

SPECIFICATIONS

Dimensions: 1.5" Diameter; 4.5" wire lead [38.1mm Diameter; 114.3 mm wire lead] Material: Plastic Case

LUTRON RELAY MODULE

CAT. NO. AC - PWR - KNB Description: Local dimming control device for 0-10v dimming; use in conjunction with 0 - 10v dimming module (Cat. No. AC - PWR - DIM) (Constant Voltage only) or in conjunction with self-contained dimming drivers (Constant Voltage or Constant Current.) CAT. NO. AC - PWR - RLY

Dimensions: 3.75" L x 2.25" W x 1.38"H [95.3mm L x 57.15mm W x 35.05mm H] Manufacturer: Lutron

Description: Power Relay Module from Lutron for use with electronic self-contained 0 - 10v dimming drivers; shuts input power to full “off". See chart on page 63 for applicable drivers.

page 86

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Notes: __________________________________________________

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 87

Visual Lighting Technologies

EssentialLEDs

EssentialLEDs® Wiring Schematics Linear Fixtures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . .. . . . . . . . . . . . . . . . . . . . . .89 1S, 2SL, 3SL, 4SL, 1QL, 1R, 2RL, 1EL, EFlex, EFlexW, 5SLW, Mini LightRun

ELP L Light Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90 ELP-G Light Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91 Dimming with Osram 0- 10v Dimming Module (OT-Dim) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92 LightRun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 LightRun Dual Color. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .94 Elegance2 and Elegance Round & Square Pucks . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95 Orb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96

Notes on Wiring Schematics 1. Figure for inches of linear fixture per driver was calculated using an 80% load capacity for each wattage driver; drivers can be loaded higher - contact factory for advice. Some drivers require 50% minimum load for proper dimming. 2. Dimming performance will be impacted by type of driver, type of dimming, driver load and dimming control equipment; results will vary based on components used. 3. To determine correct wire gauge for your application, please refer to the voltage drop calculator on the VLT website (see Downloads tab in Drivers & Controls section). For constant voltage fixtures, VLT recommends a drop of no greater than one volt.

page 88

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z023

Wiring Schematics for EssentialLEDs® Linear & Mini LightRun NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) Z total

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) Z total

DIMMABLE with HMLD Magnetic Low-Voltage Driver (i.e. VLT Hybrid Magnetic Linear Dimming Drivers)

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) Z total

D I M

Driver A

Class 2 Drivers

Total Nominal Inches of Linear Fixture "Z"

Driver Load

1118 LED Board

EFlex, EFlexW

2640 LED Board

30w

107"

131"

82"

52"

40w

142"

175"

110"

48w

170"

209"

75w

267"

80w 96w

Driver A

Total Nominal Inches of Linear Fixture "Z"

2680 LED Board

3590, 4590 LED Board

Driver Load

1118 LED Board

44"

41"

26"

120w

70"

58"

55"

35"

132"

84"

70"

66"

42"

327"

206"

131"

109"

103"

65"

284"

349"

219"

140"

116"

142"

341"

419"

263"

168"

140"

170"

1122 LED

2545, 5163 3545, 4545 Mini LightRun LED Board LED Board

LED Board

2680 LED Board

3590, 4590 LED Board

210"

175"

165"

105"

411"

262"

218"

205"

131"

807"

507"

322"

269"

258"

161"

853"

1,047"

658"

419"

349"

329"

210"

1,138"

1,396"

877"

558"

465"

438"

279"

2545, 3545, 4545 LED Board

Mini LightRun

EFlex, EFlexW

2640 LED Board

427"

524"

329"

150w

533"

655"

185w

658"

70"

240w

84"

320w

Class 1 Drivers

1122 LED

5163

1. Figure for inches of linear fixture per driver was calculated using an 80% load capacity for each wattage driver; drivers can be loaded higher - contact factory for advice. Some drivers require 50% minimum load for proper dimming. 2. Dimming performance will be impacted by type of driver, type of dimming, driver load and dimming control equipment; results will vary based on components used. 3. To determine correct wire gauge for your application, please refer to the voltage drop calculator on the VLT website (see Downloads tab in Drivers & Controls section). For constant voltage fixtures, VLT recommends a drop of no greater than one volt.

page 89

24v Driver Magnetic Low-Voltage Dimmer

EssentialLEDs® Linear Fixture or Mini LightRun

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z033

Wiring Schematics for EssentialLEDs® Panel (ELP-L) NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) Z Total

NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) Z Total

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

Z Total

DIMMABLE with Meanwell Class 1 Driver DIMMABLE with Meanwell Class 1 Driver

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) Z Total

TOTAL FOR ALL LIGHT PANELS ON DRIVER "Z"

Class 2 Drivers

Class 1 Drivers

page 90

Driver Size

# of 2626 LEDs

Sq. Ft. of 2626

# of 2613 LEDs

Sq. Ft. of 2613

30w 40w 48w 75w 96w 120w 150w 185w 240w 320w

108 144 172 495 346 432 540 666 864 1152

3.0 4.0 4.8 7.5 9.6 12 15 18.5 24 32

216 288 344 990 692 864 1080 1332 1728 2304

6.0 8.0 9.6 15 19.2 24 30 37 48 64

24v Driver

Line Voltage Input

Interconnect Wire

24V - (2) 18AWG - 66’ max total length Line Voltage Input

EssentialLEDs® Light Panel Interconnect Wire

24V - (2) 18AWG - 66’ max total length

EssentialLEDs® Light Panel

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z083

Wiring Schematics for EssentialLEDs® Panel (ELP-G) NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) Z Total

NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) Z Total

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

Z Total

DIMMABLE with Meanwell Class 1 Driver DIMMABLE with Meanwell Class 1 Driver

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) Z Total

Class 2 Drivers

Class 1 Drivers

Driver Size

# of 1104 LEDs

Sq. Ft. of 1104

30w 40w 48w 75w 96w 120w 150w 185w 240w 320w

864 1152 1382 2160 2765 3456 4320 5328 6912 9216

6 8 9.6 15 19.2 24 30 37 48 64

24v Driver

Line Voltage Input

Interconnect Wire

24V - (2) 18AWG - 66’ max total length Line Voltage Input

EssentialLEDs® Light Panel Interconnect Wire

24V - (2) 18AWG - 66’ max total length

EssentialLEDs® Light Panel

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 91

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z043

Wiring Schematics for Dimming with Osram 0-10v Dimming Module Wiring Diagram & Notes: • AC-PWR-DIM may be controlled by 1-10V DC controllers, 1-10V converters, or 100 k Ohm linear potentiometers. • AC-PWR-DIM has two dependant channel outputs (internally, these channels are in parallel). The sum of the loads from the channel outputs must not exceed the maximum output of the OTDIM (52.2W at 10V and 120W at 24V). LED Driver Input

N L

Dimming Interface Module

LED Fixtures

10-24VDC 1-10VDC <0.6mA

Control signal 1…10VDC

DIMMABLE

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

DIMMABLE

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

page 92

96w 24v Driver 100-277v 50/60hz

Line Voltage Input

EssentialLEDs® Linear Fixture w/ 2640 LED Boards

0-10v Dimmer

24V - (2) 18AWG - 66’ max total length

EssentialLEDs® Light Panel ELP-L w/ 2626 LED Boards @ 2" x 2" spacing

Interconnect Wire

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z053

Wiring Schematics for EssentialLEDs® LightRun (SHOWN IN SINGLE BRANCH CONFIGURATION) NON-DIM NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION)

NON-DIM NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION USING VLT SPLITTERS AND INTERCONNECT WIRES) (SHOWN IN MULTIPLE BRANCH CONFIGURATION USING VLT SPLITTERS AND INTERCONNECT WIRES) Terminators Terminators

“Z Total” “Z Total”

DIMMABLE (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION USING CONTRACTOR-SUPPLIED IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION USING CONTRACTOR-SUPPLIED DIMMABLE (SHOWN WIRING AND WIRE NUTS) 0-10V / DMX 0-10V / DMX

D I D M I M

WIRING AND WIRE NUTS) Channel 1 Channel 1

“Z Total” “Z Total”

Channel 2 Channel 2

- OR - Phase Control - OR - Phase Control D I D M I M

Channel 1 Channel 1 (1 Ch. Only) (1 Ch. Only)

Total Nominal Inches og LightRun "Z" Driver Current Driver Load

700mA

18w

21"

30w eldoLED

47" per ch, 47" total

36w

21"

50w eldoLED

65" per ch, 78" total

100w eldoLED

65" per ch, 157" total

Constant Current Driver Constant Current Driver Phase Control, 0-10v, DMX Dimmer Phase Control, 0-10v, DMX Dimmer 2 or 4 way Constant Current Splitter in-series connection 2 or 4 way Constant Current Splitter in-series connection Wire Nut Wire Nut Splitter Connections Splitter Connections

Line Voltage Input Line Voltage Input (2) 20AWG - 33’ max total length (2) 20AWG - 33’ max total length Interconnect Wire Interconnect Wire 0-10v or DMX control wires 0-10v or DMX control wires EssentialLEDs® LightRun EssentialLEDs® LightRun

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 93

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z093

NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION)

“Z Total” Wiring Schematics for EssentialLEDs® LightRun Dual Color

NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) “Z Total”

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) “Z Total”

DIMMABLE with HMLD magnetic low-voltage driver

(SHOWN IN MULTIPLE CHANNEL CONFIGURATION) “Z Total”

DIMMABLE with HMLD magnetic low-voltage driver D I M

(SHOWN IN MULTIPLE CHANNEL CONFIGURATION) “Z Total”

D DI IM M

D I M

Total Nominal Inches of LightRun Dual Color "Z" Class2

Class 1

Driver Load

1188 LED Board

Driver Load

1188 LED Board

2 x 30w 2 x 40w 2 x 48w 2 x 75w 2 x 80w 2 x96w

92" 120" 148" 228" 244" 288"

2 x 120w 2 x 150w 2 x 185w 2 x 240w 2 x 320w 2 x 96w

368" 460" 568" 740" 988" 288"

page 94

Constant Current Driver Phase Control, 0-10v, DMX Dimmer

2 or 4 way Constant Current Constant Current Driver Splitter in-series connection

Phase Control, 0-10v, DMX Dimmer

Line Voltage Input

0-10v or DMX control wires

(2) 20AWG - 33’ max total length

EssentialLEDs® LightRun Dual Color Fixture

Interconnect Wire Line Voltage Input

0-10v or DMX control wires

(2) 20AWG - 33’ max total length

EssentialLEDs® LightRun Dual Color Fixture

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

2 or 4 way Constant Current

Interconnect Wire

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z063

Wiring Schematics for EssentialLEDs® Elegance² & Round or Square Pucks NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION)

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION USING VLT SPLITTERS AND INTERCONNECT WIRES) Terminators

DIMMABLE (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION USING CONTRACTOR-SUPPLIED WIRING AND WIRE NUTS)

0-10V / DMX

Channel 1

Channel 2

D I M

- OR - Phase Control Channel 1

D I M

(1 Ch. Only)

Total # of Elegance² / Elegance Round Fixtures Driver Load 6w 10w 18w 30w eldoLED 50w eldoLED 100w eldoLED

350mA 1 2 3 4 per ch, 4 total 4 per ch, 8 total 4 per ch, 16 total

Constant Current Driver

Line Voltage Input

Phase Control, 0-10v, DMX Dimmer

(2) 20AWG - 33’ max total length

2 or 4 way Constant Current Splitter in-series connection

Interconnect Wire

Wire Nut

0-10v or DMX control wires

Splitter Connections

EssentialLEDs® Elegance² / Elegance Puck

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 95

Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z073

Wiring Schematics for EssentialLEDs® Orb NON-DIM (SHOWN IN SINGLE BRANCH CONFIGURATION) NON-DIM (SHOWN IN SINGLE BRANCH CONFIGURATION) NON-DIM (SHOWN IN MULTIPLE BRANCH CONFIGURATION USING VLT SPLITTERS AND INTERCONNECT WIRES) Terminators NON-DIM (SHOWN IN MULTIPLE BRANCH CONFIGURATION USING VLT SPLITTERS AND INTERCONNECT WIRES) Terminators

DIMMABLE (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION USING CONTRACTOR-SUPPLIED AND WIRE NUTS) (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION USING CONTRACTOR-SUPPLIED DIMMABLEWIRING 0-10V / DMX

0-10V / DMX

WIRING AND WIRE NUTS) Channel 1

Channel 1 Channel 2

D I M D I M

Channel 2

- OR - Phase Control - OR - Phase Control

Channel 1

D I M D I M

Channel 1 (1 Ch. Only) (1 Ch. Only)

Total # of Orb Heads* Driver Load 6w 10w 18w 30w eldoLED 36w 50w eldoLED 100w eldoLED

700mA 2 4 9 per ch, 9 total 4 15 per ch, 18 total 16 per ch, 36 total

*Each Head on an EssentialLEDs® Orb Fixture is counted individually

page 96

Constant Current Driver

Line Voltage Input

Constant Current Driver Phase Control, 0-10v, DMX Dimmer

Line Voltage Input (2) 20AWG - 33’ max total length

Control, 0-10v, DMX Dimmer 2Phase or 4 way Constant Current Splitter in-series connection 2 or 4 way Constant Current Splitter Wire Nut in-series connection

(2) 20AWG - Wire 33’ max total length Interconnect

Wire Nut Splitter Connections

0-10v or DMX control wires EssentialLEDs® Orb Fixture (shown with 2 heads)

Splitter Connections

Interconnect Wire wires 0-10v or DMX control

EssentialLEDs® Orb Fixture (shown with 2 heads)

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

EssentialLEDs

IP Rating Descriptions 2nd Digit Protection from Moisture

1st Digit Protection from Solid Objects 0

No Protection

Protected against solid objects greater than 50 mm

50 mm

No Protection

Protected against vertically dripping water

Protected against dripping water when tilted up to 15°

Protected against spraying water @ up to 60° from vertical

Protected against splashing water from all directions

15˚

Protected against solid objects greater than 12 mm

12 mm

Protected against solid objects greater than 2.5 mm

2.5 mm

Protected against solid objects greater than 1.0 mm

1 mm

Dust Protected

Protected against water jets

Dust Tight

Protected against heavy seas & streaming water

Protected against effects of short term immersion, 15 cm

15 cm

Protected against submersion, 1 m m

page 97

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

Terms & Conditions 1. Orders: Orders for Visual Lighting Technologies (VLT) will be accepted only with a written Purchase Order. This order shall be subject to all sales, excise and other taxes. Customer is responsible for furnishing a resale certificate. Accounting terms should be agreed upon prior to order placement. Hold for ‘‘Release" purchase orders will be required to receive submittal packages. “Hold for Release" orders are subject to a 10% cancellation fee once submittals are issued. VLT has a $100 minimum order policy. RUSH orders will be charged an additional 15% processing fee. 2. Credit: All new credit accounts must sign a completed credit application form or furnish VLT with their standard credit references. Please allow three to five business days to establish credit. Unless credit is established, a pre-payment by check or wire transfer should accompany the Purchase Order. All invoices not paid within terms will accrue late fees of 1.5% per month or a portion thereof. It is expressly understood and agreed that all warranties do not become effective and are expressly contingent upon payment of all sums due and payable, including but not limited to, finance charges, transportations costs, attorneys fees, and late fees. 3. Terms: Payment terms and credit limit of approved credit customers will be determined by VLT based on business consideration, credit history, years in business, etc. VLT reserves the right to hold any orders if an account has open invoices that extend beyond payment terms or exceed approved credit limit. Standard terms are 50% Deposit and 50% on Delivery of goods. Custom orders always require a 50% deposit. New customers must provide a 50% deposit on their first order. 4. C.O.D. Orders: All C.O.D. orders may be paid by company checks if approved by VLT. A $15.00 C.O.D. fee will be added to the C.O.D. amount. 5. International Orders: All international orders must be pre-paid by wire transfer. 6. Shipping: Consult factory for current lead-time prior to order placement. All prices are F.O.B. Lake Forest, California. Collect or pre-paid and additional methods of delivery and routing shall be at the seller’s discretion. VLT reserves the right to add handling charges to any shipment. VLT does not permit “freight allowed" terms. 7. Returns: See VLT “Limited Warranty" opposite for return instructions on defective or unwanted products. Unwanted products that are both eligible for return and in original condition, must be returned within 30 days of invoice date and are subject to a 35% re-stocking fee. Custom-manufactured fiber and LED products are NOT eligible for return and CANNOT be returned as "unwanted". 8. Loss or Damage: All products are tested, QC reviewed, and known to be in working order before leaving VLT. All title and risk of loss pass to buyer at seller’s dock. Claims for lost or damaged products/shipments shall be made by the buyer with the transportation agent or shipping firm. Buyer must inspect equipment immediately upon receipt and report any damage to the appropriate party within 72 hours of receipt. 9. Payment of Invoices: Remit invoices to Visual Lighting Technologies, 9 Rancho Circle, Lake Forest, CA 92630 10. Prices are subject to change without notice. 11. All prices are stated in U.S. dollars. 12. VLT’s Limited Warranty is contingent upon and does not become effective until orders are fully paid. The remedy under VLT’s Limited Warranty is not available to clients and/or orders where there is an outstanding balance due and/or overdue invoice. VLT’s Limited Warranty will be provided on request.

page 98

Customer Signature:_______________________________________________________________________

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

Visual Lighting Technologies

Essential LEDs® 5 Year Limited Warranty Visual Lighting Technologies (VLT) warrants its EssentialLEDs® Linear and EssentialLEDs® Light Panel products (not including damage to product incurred during shipment or transportation; see also VLT Terms and Conditions) as follows: LED Products: VLT guarantees that all EssentialLEDs® products sold by VLT will be free from defects in material or workmanship for a period of five (5) years from the date of purchase subject to the Warranty Terms and Conditions detailed below. LED Drivers: VLT guarantees that all LED driver products sold by VLT will be free from defects in material or workmanship for a period of five (5) years from the date of purchase subject to the Warranty Terms and Conditions detailed below. Warranty Terms: VLT shall first attempt to repair any defective product and second replace it with the same model, or its equivalent model, at no charge, excluding any shipping charges. To obtain warranty service, or to send back unwanted product that is eligible for return: 1) A return authorization number (RMA#) must be obtained from VLT; 2) The product must be delivered or shipped prepaid to VLT; and 3) Proof of purchase in the form of a bill of sale or invoice, indicating that the product is within the warranty period, must be sent to VLT to obtain warranty service. For unwanted product (in original condition), return must be made within 30 days of invoice date. 4) VLT shall not be liable for any incidental, direct, or indirect costs incurred in the removal or reinstallation of any product returned for repair or replacement. Warranty Conditions: This warranty will be void if the warranted items are: 1) Used, installed and/or maintained in such a manner that is not in accordance with VLT’s specifications, recommendations, and/or procedures, including, but not limited to: a) Mishandling, such as stretching, pulling, kinking, breaking, crimping, cutting or scratching of LED; b) Any drilling of additional mounting holes or trimming of Light Panel pieces will nullify safety rating and void product warranty; c) Failure to follow installation and maintenance manuals and/or instructions provided by the manufacturer; d) Use with LED drivers other than those provided by VLT; 2) Modified or altered in any way by anyone other than VLT or VLT’s authorized agents; 3) Not made available to VLT or its authorized agent for inspection, along with all installation, maintenance and other appropriate documents, when warranty claim is made. This warranty does not include cosmetic damage, or damage to any part of the product resulting from acts of God, accident, shipping, misuse, abuse, improper storage or connection to an improper voltage supply. VLT is not responsible for merchandise damaged in transit. Apparent or concealed damages that are incurred in transit should be reported immediately to the transportation carrier and an appropriate claim filed with the carrier. Repaired or replaced products shall be subject to the terms of this Warranty and are inspected when packed for return shipment. Disclaimer of Other Warranties: This Warranty (and any repair and replacement as provided herein) is the sole and exclusive remedy of any claims relating to items purchased through VLT; and no other warranties, express or implied, are given, including warranties of merchantability or fitness for any particular purpose. VLT shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this product. VLT will not be responsible for any representation, promise or expansion of this limited warranty by any dealer, sales or manufacturing representative or distributor of the products covered by this warranty. In the event that there is any statutory expansion of the provisions of the warranty expressed herein, the item will be deemed purchased on an as-is basis as to such expansion. Except as provided in this limited warranty all items are purchased in an as-is condition. Please contact VLT to verify that you qualify for warranty repair or replacement.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 99

Visual Lighting Technologies

MADE in USA

Scan this special code using a QR reader on your smartphone to visit our website. Stay up to date on the latest VLT products and news!

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com