Page 1

visual lighting technologies

EssentialLEDs linear & light panel

2013/2014


Visual Lighting Technologies

EssentialLEDs

Products: ELP-L, 3SL, 2RL, 2RL

page 2

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Products: 1S, 3SL, ELP-L, ELP-G

page 3

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs 1S Small Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2SL Medium Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . .16

3SL Large Square Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . . .17

4SL Square Extrusion Tall . . . . . . . . . . . . . . . . . . . . . . . . . . . . .18

1QL Quarter Round Extrusion . . . . . . . . . . . . . . . . . . . . . . . . . 19

1R Round Extrusion . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . 20

2RL Round Extrusion . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . .21

Picture Light . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .22

1EL Demi-Ellipse Extrusion . . . . . . . . . . . . . .. . . . . . . . . . . . . 24

Linear Mounting . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .26 Special Mounting Options for 3SL & 4SL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30 Special Mounting Options for 1r & 2RL. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

page 4

EFLEX . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .36

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs EFLEXW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

5SLW Square Extrusion - Exterior. . . . . . . . . . . . . . . . . . . . . .40

LightRun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .44

Elegance² . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46

Orb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .48

LED Light Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52 ELP-L . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56 ELP-G . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Constant Voltage Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . .63

Constant Current Drivers . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

Dimming & Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) 20” total

NON-DIM

Circuit Diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

128” total

DIMMABLE with HMLD Magnetic Low-Voltage Driver (i.e. VLT Hybrid Magnetic Linear Dimming Drivers)

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

ALL EssentialLEDs Lighting Products Made in USA 208” total

D I M

DRIVER SELECTOR CLASS 2 Total Inches of Linear Fixture

.25 watt•LEDs .10 watt LEDs Visual Lighting Technologies 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com Driver Sizes

10

44”

25

112”

30

192”

48

204”

20” 52”

64” 104”

page 5


Visual Lighting Technologies

EssentialLEDs About EssentialLEDs In 2012, Visual Lighting Technologies debuted EssentialLEDs, offering linear and panel LED products with exceptional light quality, tremendous flexibility and highly competitive pricing. This year we’ve added a number of new options, including new profiles and lensing choices, new LED options, and new flexible and wet location products. Now, more than ever, EssentialLEDs are the go-to option for accent, task or display applications, providing specifiers with the high lumen output, high CRI, full color temperature range and imaginative fixture choices they need. And every EssentialLEDs fixture offers the same careful craftsmanship, customizability, and quick turnaround as before. EssentialLEDs Interior Linear now includes 8 different extrusion shapes and sizes, in lengths up to just under 8 feet (95.28”). There’s a perfect extrusion for any interior application, from toe kicks and wall washes to shelf and showcase displays. This year we’ve added the 4SL extrusion, offering a fully diffused line of light in a ½” width extrusion, and the 1EL, a half-elliptical shape that provides a recessed placement for the LED board and shields the diodes from side view. Our new LightRun is a specialized display fixture that uses special holographic diffuser lensing to produce an exceptionally uniform illumination, without the distraction of reflected LED diodes. Introducing EssentialLEDs Exterior: with this catalog, EssentialLEDs ventures into wet locations with our first IP67 extrusion, the 5SLW. It offers a slender profile for delineating ledges, seat walls and other exterior features, and like our interior fixtures, is available in a full range of lengths and color temperatures. EssentialLEDs Light Panel continues to offer the same high lumen output and broad CCT options of our linear products, in a very useful backlighting product. Our ELP-L Light Panel evenly backlights acrylic, glass, fabric or onyx panels in any size or shape up to 60” x 120”, and the wall-mount installation is easy using pre-drilled holes. Our ELP-G product is the perfect solution for backlighting Barrisol and other stretched-fabric ceiling products. Finally, for those times when a flexible product is the best solution, we’ve added flexible LED products for interior or exterior applications. Our EssentialsFlex and EssentialsFlexW products use the same high-quality LEDs, in our full range of color temperatures.

About the LEDs From the beginning, Visual Lighting Technologies has been proud to use Nichia LEDs. As one of the world’s leading LED manufacturers, Nichia has leveraged its vast experience with phosphors to create beautiful white light LEDs in a full range of color temperatures. On the opposite page, you can learn more about the very selective LED binning we use for all our EssentialLEDs products.

page 6

With this new edition of our catalog, you’ll notice a shift away from the designation of LEDs in terms of wattage, toward a new emphasis on lumen output. As LED advances continue to produce more light output for less energy, lumen output becomes a more informative measure for differentiating LEDs, as well as a more useful and precise standard for specifiers. As an example of this evolution in LED technology, we are now able to offer Nichia 757 LEDs as an option in all of our linear products. Like Nichia’s 157 LED, the 757 LED on our 4545 LED board is nominally “.25w”, but actually produces 30% higher lumen output; if high color rendering is your priority, 757 LEDs on our 3545 LED board deliver a 92+ CRI. As Nichia’s LEDs continue to advance, VLT will continue to make those improvements available in our EssentialLEDs products. All EssentialLEDs products are designed and manufactured in Southern California.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs Binning & Chromaticity Per ANSI Standards, as followed by Nichia and other LED manufacturers, nominal CCT bins (i.e. “the 3500°K bin”) include LEDs in a range of actual color temperatures. For example, the 3500°K bin can vary by ±245°K (7 MacAdam Ellipses). VLT ‘s binning for the EssentialLEDs products is much more selective, first limiting our overall selection to four smaller bins within the ANSI color bin (3 MacAdam Ellipses, as shown in grey below). Then, on a project-by-project basis, we narrow the selection to just one of the four smaller bins, with effective binning on any given project a remarkable ±60°K*, just 2 MacAdam Ellipses. The result is exceptionally consistent light output that delivers the precise color temperature specified. (*±60°K from median CCT in each of the bins detailed) ANSI Standard Binning: ±245°K | 7 MacAdam Ellipses

0.45

2700K

3000K

0.40

VLT Project Binning: ±60°K | 2

0.45

VLT Project Binning Just 1 of 4 Smaller Bins

2400K

3500K

3500K Bin

4000K

Y

MacAdam Ellipses

4500K

Y

Blackbody Curve

0.40

0.35 Blackbody Curve

0.45

0.40

0.35

0.50

0.35

0.40 X

X

0.45

VLT Overall Binning - Four of Sixteen Smaller Bins Within Nominal CCT Bin - (3500°K Example) sw3558

sw3567

X

0.4016

0.4045

0.4117

0.4085

X

0.4085

0.4117

0.4189

0.4154

Y

0.3897

0.3975

0.4009

0.3928

Y

0.3928

0.4009

0.4044

0.3959

X

0.3989

0.4016

0.4085

0.4054

X

0.4054

0.4085

0.4154

0.4120

Y

0.3819

0.3897

0.3928

0.3847

Y

0.3847

0.3928

0.3959

0.3875

sw3576

CRI Details Index CRI 01 CRI 02 CRI 03 CRI 04 CRI 05 CRI 06 CRI 07 CRI 08 CRI 09 CRI 10 CRI 11 CRI 12 CRI 13 CRI 14 CRI (Ra)

sw3585

(1018,2545& 2590 LED Boards)

x

y

Color

LED1

Luminaire2

0.3692 0.3794 0.3772 0.2892 0.2578 0.2360 0.2770 0.3259 0.5492 0.4376 0.2551 0.1517 0.3690 0.3538 -

0.3291 0.3955 0.4880 0.3963 0.3078 0.2365 0.2372 0.2584 0.3045 0.4601 0.4162 0.1490 0.3510 0.4284 -

Light greyish red Dark greyish yellow Strong yellow green Moderate yellowish green Light bluish green Light blue Light violet Light reddish purple Strong red Strong yellow Strong green Strong blue Light yellowish pink (skin) Moderate olive green (leaf ) Average level of CRI 01- 08

84 90 94 82 83 86 86 69 27 76 80 67 85 96 84

87 95 96 82 85 92 86 71 36 87 80 69 89 99 87

1

Data provided by Nichia

2

Data from LM79 Report with 157 LED

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 7


Visual Lighting Technologies

EssentialLEDs

About Interior Linear EssentialLEDs Linear products combine the best qualities of LED technology - the small size, long life and great lumen output - to simplify the application of light in interior spaces. EssentialLEDs Linear extrusions offer an intriguing range of styles and sizes that are perfect for accent, task and display applications, with a large range of mounting options that Products: 2RL, 2RL, 1QL

provide a solution for most every installation challenge. EssentialLEDs Linear products offer custom sizing for perfect integration in a wide variety of architectural spaces, while the high CRI, exceptional binning and full range of CCT choices ensure that every application will beautifully enhance the overall space.

page 8

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W002

Interior Linear Fundamentals Applied LEDs: Nichia 157 LED or Nichia 757 LED (up to 30% brighter). All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. All LEDs available in 2700K, 3000K, 3500K, 4000K & 4500K. 157 LED .25w also available in 2400K. 2590

Choose from 4 LED Boards for a Range of Lumen Outputs and CRI Options!

3590

4590

1018

2545

3545

4545

(2 x 2545)

(2 x 3545)

(2 x 4545)

APPLIED LED

Nichia 157

Nichia 157

Nichia 757

Nichia 757

Nichia 157

Nichia 757

Nichia 757

LUMEN OUTPUT

169 lm/ft [554 lm/m]

366 lm/ft [1200 lm/m]

443 lm/ft [1453 lm/m]

516 lm/ft [1692 lm/m]

673 lm/ft [2207 lm/m]

TBD

774 lm/ft [2539 lm/m]

LED WATTAGE

.10w

.25w

.25w

.25w

.25w x 2

.25w x 2

.25w x 2

LED EFFICACY*

108 lm/w

108 lm/w

110 lm/w

126 lm/w

126 lm/w

110 lm/w

126 lm/w

POWER CONSUMPTION

2.7w/ft. [8.9w/m]

5.5w/ft. [18.0w/m]

5.5w/ft. [18.0w/m]

5.5w/ft. [18.0w/m]

11.0w/ft [36.1w/m]

11.0w/ft [36.1w/m]

11.0w/ft [36.1w/m]

CCT OPTIONS

EXCEPT 2400K

ALL

EXCEPT 2400K

EXCEPT 2400K

ALL

EXCEPT 2400K

EXCEPT 2400K

87

87

92+

85

87

92+

85

LED Board

CRI

*Based on 3500K CCT

LENSING FINISH

All fixtures available in silver or black anodized finish; 1R, 2RL, 1QL & 1EL also available in white or bronze powder coating; custom finishes on request

LENGTHS

Up to 95.28” [2.42m]; see Length & Wattage Table (page 14) for all standard length options Driver Type: Constant Voltage, Class 2 UL Recognized (ETL Listed as a system) Input Voltage: 24vDC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, Electronic Low-Voltage with HELD Driver or via 0-10 volt with Electronic Driver Feed Wire: 96” [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

Lensed and unlensed options available; 94° or 30° clear lenses, three opal acrylic lens options. See page 12 for information about lensing choices, and pages 11 & 12 for photometric comparisons.

ELECTRICAL

TBD: Not all new fixture data available at time of printing. Please check website for complete information.

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty

Mounting options differ according to extrusion; may include fixed and/or adjustable clips, mounting end caps, bushings, free-standing mount, recessed options; up to IP54 (UL 2108, 8750 & 962);

LINEAR LEDs EssentialLEDs Linear products provide bright and even linear lighting for interior applications such as: • Architectural Accents (Coves, Niches, Toe Kicks, Wall Grazing, etc.) • Display Lighting • Under Cabinet & Task Lighting EssentialLEDs Linear products offer .10w and .25w LEDs in a range of CRI and color temperature options. EssentialLEDs Linear products are available in numerous aluminum extrusion profiles, with a wide range of mounting options to choose from. EssentialLEDs Linear products are dimmable and available in custom lengths up to 95.28”[2.42m]. Visit the VLT website for application photos and the most recent IES files.

MADE in USA

RoHS Compliant (if specified); LM79, LM80 ; Title 24, IP20 or IP54 (Dry/Damp)

- Suitable for installation within the closet storage space The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 9


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X022

Lumens/footcandles Table

1S

2SL

3SL

2RL

Hea v Opa l 3,

Opa l 2,

y

Me diu m

Fro ste d

30°

Opa l 1,

Len s

Len s Cle ar

2.7

lm

fc

173

120

143

106

2545

157

5.5

lm

fc

366

251

301

221

3545

757

5.5

lm

fc

443

300

378

269

4545

757

5.5

lm

fc

516

352

440

316

1018

157

2.7

lm

fc

139

120

119

236

128

70

105

81

78

54

2545

157

5.5

lm

fc

300

242

255

475

287

267

235

193

175

129

3545

757

5.5

lm

fc

328

298

289

517

299

292

245

296

182

141

4545

757

5.5

lm

fc

428

349

377

606

390

342

320

347

238

165

1018

157

2.7

lm

fc

156

117

81

72

66

52

49

35

2545

157

5.5

lm

fc

362

260

172

155

141

112

105

75

3545

757

5.5

lm

fc

TBD

TBD

TBD

TBD

TBD

TBD

TBD

TBD

4545

757

5.5

lm

fc

456

350

263

312

207

164

170

123

2590

157

11.0

lm

fc

673

491

TBD

TBD

TBD

TBD

200

140

3590

757

11.0

lm

fc

TBD

TBD

TBD

TBD

TBD

TBD

TBD

TBD

4590

757

11.0

lm

fc

774

665

492

551

387

305

316

230

1018

157

2.7

lm

fc

TBD

TBD

TBD

TBD

TBD

TBD

2545

157

5.5

lm

fc

123

114

101

82

75

55

3545

757

5.5

lm

fc

TBD

TBD

TBD

TBD

TBD

TBD

4545

757

5.5

lm

fc

181

162

149

117

111

78

1018

157

2.7

lm

fc

173

120

2545

157

5.5

lm

fc

366

251

3545

757

5.5

lm

fc

443

300

4545

757

5.5

lm

fc

516

352

1018

157

2.7

lm

fc

139

120

119

236

128

70

105

81

78

54

2545

157

5.5

lm

fc

300

242

255

475

287

267

235

193

175

129

3545

757

5.5

lm

fc

328

298

289

517

299

292

245

296

182

141

4545

757

5.5

lm

fc

428

349

377

606

390

342

320

247

238

165

(2 x 2545)

page 10

ns

157

(2 x 3545)

1R

No Le

1018

(2 x 2545)

4SL

App lied LED Wa tts per Foo t Lum ens per Foo Foo t tca ndl es a t 12 ”

LED

Boa rd

All photometric data based on 3500°K LEDs. See Light Output Conversion information on page 11.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X022

Hea v Opa l 3,

Opa l 2,

y

Me diu m

Fro ste d Opa l 1,

30°

Cle ar

Len s

Len s

ns No Le

App lied LED Wa tts per Foo t Lum ens per Foo Foo t tca ndl es a t 12 ”

LED

Boa rd

Lumen/Footcandles Table

1018

157

2.7

lm

fc

139

120

119

236

128

70

105

81

78

54

2545

157

5.5

lm

fc

300

242

255

475

287

267

235

193

175

129

3545

757

5.5

lm

fc

328

398

289

517

299

292

245

296

182

141

4545

757

5.5

lm

fc

428

349

377

606

390

342

320

247

238

165

1018

157

2.7

lm

fc

132

117

2545

157

5.5

lm

fc

294

256

3545

757

5.5

lm

fc

TBD

TBD

4545

757

5.5

lm

fc

415

359

EFlex

1022

157

2.2

lm

fc

EFLexW

1022

157

2.2

lm

fc

170

359

1018

157

2.7

lm

fc

157

124

TBD

TBD

TBD

TBD

TBD

TBD

2545

157

5.5

lm

fc

339

251

TBD

TBD

TBD

TBD

TBD

TBD

3545

757

5.5

lm

fc

370

309

TBD

TBD

TBD

TBD

TBD

TBD

4545

757

5.5

lm

fc

484

362

TBD

TBD

TBD

TBD

TBD

TBD

1084

157

6.6

lm

fc

385*

257*

1QL

1EL

5SLW

Light Run

192

126

TBD: Not all new fixture data available at time of printing. Please check website for complete information. *LightRun photometric testing at 700mA with diffuse lens

Light Output Conversion CCT

2400K*

2700K

3000K

3500K

4000K

4500K

Light Output Conversion

.88

.88

1.0

1.0

1.08

1.08

*2545 & 2590 LED Boards Only

3500°K LEDs are used for all photometric testing. To determine lumen outputs for other color temperatures, use the designated multiplier in the table above. IES files for all LED and extrusion options can be found on our website at www.essentialLEDs.com. You’ll find them on the “downloads” tab for each extrusion type.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 11


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X032

Standard Extrusions 1S - Small Square

2SL - Medium Square/Lensed

1R - Small Round

2RL - Large Round/Lensed

All lenses are notched for a flush top surface

3SL - Large Square/Lensed

4SL - Medium Square Tall/Lensed

1QL - Quarter Round/Lensed

1EL - Demi Ellipse/Lensed

LENS

Lensing Options Lensing on a linear LED product performs a range of functions, and the best lens choice for your project depends on both the extrusion and the needs of your application. EssentialLEDs offers five lensing options: A Clear Slide-On Lens for 1S fixtures, Clear (94°), 30° Optic Lenses, Frosted (1), Medium (2), and Heavy (3) Opal Lenses. See the chart on pages 10 & 11 to see lens options for each extrusion. The information below will help you make the best lens choice for your project. There are five things to consider: 1. Protection of the LEDs: the first benefit of a lens is protection of the LEDs from dust, dirt, splashes and cleaning liquids. Adding a Slide-On Lens to the 1S extrusion will provide these benefits with minimal light loss and keep the fixture’s small profile, but because the 1S extrusion is open on the ends, the 1S fixture remains an IP20 fixture. For all other extrusions, the lens “closes” the fixture, protects the LEDs, and provides an IP54 (dry/damp) rating. 2. Softening the LED Diodes: LED diodes produce a remarkable amount of light, but when viewed directly, or in a reflection, the human eye perceives that point of light as glare. Additionally, the series of diodes on an LED board create a dot pattern that many find distracting and aesthetically undesirable. Depending on the extrusion used, lensing can either soften or fully eliminate both the glare and the dot pattern of the LEDs. Full diffusion is possible only with the 3SL & 4SL extrusions (see more about that below); for all other extrusions, the use of an Opal Lens (1, 2 or 3) will provide varying degrees of diffusion to “soften” the light point from the LED and reduce reflections. 3. Full Diffusion for Direct View Applications: Fully diffusing the LED diodes involves two factors - the opacity of the lens, and the distance between the lens and the diodes. 3SL and 4SL extrusions provide enough distance between the lens and the LEDs to fully diffuse; when combined with the Opal 2 or Opal 3 lenses, they can be used in direct view applications like vanity lighting or decorative lines of light. The Opal 2 option allows more light output (preferable for a vanity application), while the Opal 3 lens is more subtle for a decorative effect. See data on pages 10 & 11 for photometric comparisons. See page 3SL and 4SL pages for more info on direct view applications.

page 12

4. Light Output vs Diffusion: Anytime an Opal lens is chosen, there is a trade-off between diffusion and light output. Both the Opal 1 & Opal 2 options provide a softening of the LED diode, but also diminish light output; please see the lumen | footcandle data on pages 10 & 11 for specific photometric comparisons. 5. Light Distribution: The unlensed beam spread of an LED is 116°, but for applications such as wall-washing or grazing, EssentialLEDs offers a 30° lens to more tightly focus the light output. Refer to the photometric data on pages 10 & 11 to see how lensing will affect the fixture’s lumen output.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X042

Wire Exits & Daisy Chained Fixtures Square Extrusions

WR3

WR2

WR1

WE3

1S* 2SL 3SL 4SL 5SLW* *(1S & 5SLW extrusions available with WE1 or WE3 options ONLY.)

WE1 (Default)

WL3

WL2

WL1

WB3

WB1

Round Extrusions

WE3

1R 2RL

WE1 (Default)

WB3 WB1 WR3

Quarter Round Extrusion

WR1

WE3 (Right)

WE1 (Left)

1QL

WB3 WB1

WE3

Demi-Ellipse Extrusion

WE1 (Default)

1EL

WB3 WB1

To Specify “Daisy-Chained” Configurations: In certain applications, “Daisy-Chained” configurations provide the best wiring solution. Specify the following “Daisy-Chain Termination” Modification for EVERY fixture needing to be daisy-chained; refer to the correct diagrams above for available Wire Exit options: See example below. Daisy-Chained lengths CANNOT exceed a TOTAL of 44 watts per run! DAISY-CHAIN TERMINATION

CAT. NO.

Specify two wire exits, two wire lengths, and two connectors for each fixture to be daisy-chained. Sample specification: ELL - AC - DCT - WE1 - 2” - NC / WE3 - 2” - NC No Connector

LEFT SIDE -

ELL - AC - DCT WE1 WR1 WL1 WB1

Wire Length in Inches

NC MC FC

NC

RIGHT SIDE -

/ WE3 WR3 WL3 WB3

Wire Length in Inches

NC MC FC

No Connector

MC Male Connector

WE 1 WE 3

No Connector

FC

Female Connector

2” Length

2” Length

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 13


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X052

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions.

Code

Fixture Lengths

1018

2545 / 3545 / 4545 2590 / 3590 / 4590

4

4 .72” [120mm]

0 .9w

1.8w

3 .7w

8

8 .66” [220mm]

1 .80w

3.7w

7 .3w

12

12 .60” [320mm]

2 .7w

5.5w

11 .0w

16

16 .54” [420mm]

3 .6w

7.3w

14 .6w

20

20 .47” [520mm]

4 .5w

9.2w

18 .3w

24

24 .41” [620mm]

5 .4w

11.0w

22 .0w

28

28 .35” [720mm]

6 .3w

12.8w

25 .6w

32

32 .28” [820mm]

7 .2w

14.6w

29 .2w

36

36 .22” [920mm]

8 .1w

16.5w

33 .0w

40

40 .16” [1020mm]

9 .0w

18.3w

36 .6w

44

44 .09” [1120mm]

9 .9w

20.1w

40 .2w

48

48 .03” [1220mm]

10 .7w

22.0w

44 .0w

52

51 .97” [1320mm]

11 .6w

23.8w

47 .6w

56

55 .91” [1420mm]

12 .5w

25.6w

51 .2w

60

59 .84” [1520mm]

13 .4w

27.5w

55 .0w

64

63 .78” [1620mm]

14 .3w

29.3w

58 .6w

68

67 .72” [1720mm]

15 .2w

31.2w

62 .4w

72

71 .65” [1820mm]

16 .1w

33.0w

66 .0w

76

75 .59” [1920mm]

17 .0w

34.8w

69 .6w

80

79 .53” [2020mm]

17 .9w

36.7w

73 .4w

84

83 .46” [2120mm]

18 .1w

38.5w

77 .0w

88

87 .40” [2220mm]

19 .7w

40.3w

80 .6w

92

91 .34” [2320mm]

20 .6w

42.2w

84 .4w

96

95 .28” [2420mm]

21 .5w

44.0w

88 .0w

Any of the fixture lengths listed above is considered a “standard” length fixture. If your application requires a fixture length that differs from the lengths offered above, it would be considered a “custom” length. “Custom” length fixtures have an overall finished length (including end caps) that is exactly as specified; because the LED boards are limited to 4” increments, the LED board that is the next size down from the length specifed would be centered inside the custom length fixture.

page 14

Because LEDs have a generous field angle, it is not necessary for a fixture to extend the full length of a cabinet, shelf or display case for the area to be fully lit. Custom fixture lengths are most often used where the fixture is visible and an exact-length fixture is desired for aesthetic reasons.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W072 1S Small Square Extrusion - optional lens IP20 | Small square extrusion for linear lighting applications. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. When using SL Lens, use 2SL Clips. Weight per foot 0.0534 lb/ft [0.0795 kg/m].

116°

Photometrics vary based on CCT; see chart on page 10 for data specific to your fixture.

ELL- 1S - __________ - ___________ - _________ - _________ - __________ - __________ - _____________ LED

CCT

Finish

Lens Options

1018

173 lm/ft, 2.7 w/ft, 87 CRI

24 2400°K *

AL Silver Anodized

NL No Lens

27 2700°K

SLC Clear Lens

2545

366 lm/ft, 5.5w/ft, 87 CRI

BL Black Anodized

30 3000°K

3545

443 lm/ft, 5.5w/ft, 92+ CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

Wire Exit WE1 Default

C Custom

35 3500°K

C Custom (see page 13)

Factory Installed Options RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length Use Code from Chart on page 14 or specify Custom Length as follows:

45 4500°K * 2545 LEDs only

C (12.25") or C (311 mm)

Fixture Accessories ELL - AC - 1S - MC

ELL - AC - 1S - AMC

Fixed Metal Mounting Clip. Fixture with Adjustable Metal Mounting Clip. Offset No Lens snaps into clip. Allow 1 per 20” (min. screws allow flush mounting. Bends to desired 2 per fixture). See page 26.. angle. Allow 1 per 20” (min. 2 per fixture). See page 26.

ELL - AC - S123 - AB

ELL - AC - 2SL - MC

Adjustable Metal Bracket. for use with Fixed Metal Fixed Metal Mouting Clip. Fixture with Mounting Clip (one bracket per clip). 30° adjustability. SLC Lens snaps into clip. Allow 1 per 20” Raises fixture 3/8” (9.52mm). Bracket allows repeated an- (min. 2 per fixture). See page 26. gle adjustments, and easier angle adjustments in hard-toreach areas like ceiling coves. See page 27.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 15


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W082

2SL Medium Square Extrusion - Lensed IP54 | Medium Square extrusion for linear lighting applications. Dry or damp locations. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of 2 beam angles using Clear Lenses or 3 Opal diffusion lenses. Weight per foot 0.1653 lb/ft [0.2460 kg/m].

(Beam Angle based on 2SL fixture with Clear Acrylic lens)

94°

Photometrics vary based on lens and CCT; see chart on page 10 for data specific to your fixture.

ELL- 2SL - ____________ - ________ - _________ - _________ - __________ - ____________ - ____________ Lens Options

LED

CCT

Finish

173 lm/ft, 2.7 w/ft, 1018 87 CRI

24 2400°K *

AL Silver Anodized

PG 94° Acrylic

BL Black Anodized

30C 30° Acrylic

27 2700°K

2545

366 lm/ft, 5.5w/ft, 87 CRI

30 3000°K

443 lm/ft, 5.5w/ft, 92+ CRI

35 3500°K

OP2 Opal 2, Medium

3545

40 4000°K

OP3 Opal 3, Heavy

4545

516 lm/ft, 5.5w/ft, 85 CRI

C Custom

OP1 Opal 1, Frosted

Factory Installed Options

Wire Exit

RO RoHS Compliant**

WE1 Default C Custom (see page 13)

45 4500°K * 2545 LEDs only

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length Use Code from Chart on page 14 or specify Custom Length as follows:

C (12.25") or C (311 mm)

Fixture Accessories ELL - AC - 2SL - MC

page 16

Fixed Metal Mouting Clip. Fixture extrusion snaps into clip. Allow 1 per 20” (min. 2 per fixture). See page 26.

ELL - AC - 2SL - AMC

Adjustable Metal Mouting Clip Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 20” (min. 2 per fixture). See page 26.

ELL - AC - S123 - AB

Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip). 30° adjustability. Raises fixture 3/8” (9.52mm). Bracket allows repeated angle adjustments, and easier angle adjustments in hard-to-reach areas like ceiling coves. See page 27.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W032 3SL Large Square Extrusion - Lensed

In 3SL extrusion with Clear Acrylic lens, LEDs are placed on internal riser for maximum light output.

IP54 | Large square extrusion for linear lighting applications, including Direct View Accents. Dry or damp locations. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Also available with Dual LED Boards as 2590 (2 x 2545 LED Boards), 3590 (2 x 3545 LED Boards) or 4590 (2 x 4545 LED Boards). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 & 2590 LED boards also in 2400K.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of 112° (standard) or 3 Opal diffusion lenses. Weight per foot 0.5862 lb/ft [0.8724 kg/m]. 2590, 3590 and 4590 configurations can be specified with 2 different color temperatures (1 per board) and separate power leads per board, allowing for independent control and variable color temperature mixing. See page 76 for dimming controls.

In 3SL extrusion with Opal Acrylic lens, LEDs are placed deep in extrusion for full diffusion.

About Lens Choice: Both Opal 2 and Opal 3 lenses provide full diffusion for the 3SL fixture, but light output is approx. 25% lower with Opal 3. Use Opal 2 where the fixture is intended as a light source (i.e. ceiling and vanity applications). Use Opal 3 for applications where the fixture is primarily a direct-view decorative element, as it produces less glare. Photometrics vary based on lens and CCT; see chart on page 10 for data specific to your fixture.

ELL- 3SL - __________ - ________ - _________ - _________ - __________ - ____________ - __________ CCT

Finish

173 lm/ft, 2.7 w/ft, 87 CRI

24 2400°K *

AL Silver Anodized

PG Clear Acrylic

27 2700°K

OP1 Opal 1, Frosted

2545

366 lm/ft, 5.5w/ft, 87 CRI

BL Black Anodized

30 3000°K

3545

443 lm/ft, 5.5w/ft, +92 CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

2590

673 lm/ft, 11w/ft, 87 CRI

LED 1018

TBD lm/ft, 11w/ft, 3590 +90 CRI 4590

C Custom

35 3500°K

Lens Options OP2 Opal 2, Medium* OP3 Opal 3, Heavy* * Recommended for full diffusion

45 4500°K * 2545 & 2590 LEDs only

When specifying 2590, 3590 or 4590 LEDs with two CCTs, please specify a CCT for each row, i.e. “ELL - 3SL - 2590 - 27/40 - etc.” for fixture with 2700° and 4000° LEDs.

Wire Exit

Factory Installed Options

WE1 Default

RO

C Custom (see page 13)

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length Use Code from Chart on page 14 or specify Custom Length as follows:

C (12.25") or C (311 mm)

774 lm/ft, 11w/ft, 85 CRI

Fixture Accessories - More Information on Rough-in Kit on Page 30 ELL - AC - 3SL - MC

ELL - AC - 3SL - AMC

ELL - AC - S123 - AB

ELL - AC - 3SL - WCR - AL

page 17 Fixed Metal Mounting Clip. Fixture extrusion snaps into clip. Allow 1 per 20” (min. 2 per fixture). See page 26.

Adjustable Metal Mounting Clip. Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 20” (min. 2 per fixture). See page 26.

Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip). 30° adjustability. Raises fixture 3/8” (9.52mm). Bracket allows repeated angle adjustments, and easier angle adjustments in hard-to-reach areas like ceiling coves. See page 27.

Wall / Ceiling Mouting Rough-in; Specify length to match fixture length. 8-32 flat head screw allows height adjustment for flush installation. (Not walk-over or drive-over rated). See page 30.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W092

4SL Square Extrusion Tall - Lensed IP54 | Square extrusion with extra depth capable of full diffusion of LED diodes. Use decoratively for a slim (9/32”) visible line of diffused light, or light above polished surfaces without reflected diodes. Dry or damp locations. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Silver, Black or Custom Finishes. Choice of 3 Opal diffusion lenses. Opal 2 (Medium) or Opal 3 (Heavy) required for full diffusion. Weight per foot 0.2955 lb/ft [0.4398 kg/m] About Lens Choice: Both Opal 2 and Opal 3 lenses provide full diffusion for the 4SL fixture, but light output is approx. 25% lower with Opal 3. Use Opal 2 where the fixture is intended as a light source (i.e. ceiling and vanity applications). Use Opal 3 for applications where the fixture is primarily a direct-view decorative element, as it produces less glare. Photometrics vary based on lens and CCT; see chart on page 10 for data specific to your fixture.

ELL- 4SL - __________ - _________ - _________ - __________ - __________ - __________ - __________ LED

CCT

Finish

173 lm/ft, 2.7 w/ft, 1018 87 CRI

24 2400°K *

AL Silver Anodized

OP1 Opal 1, Frosted

27 2700°K

BL Black Anodized

OP2 Opal 2, Medium

2545

366 lm/ft, 5.5w/ft, 87 CRI

30 3000°K

3545

443 lm/ft, 5.5w/ft, 92+ CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

C Custom

35 3500°K

Lens Options OP3 Opal 3, Heavy*

Factory Installed Options

Wire Exit

RO RoHS Compliant**

WE1 Default C Custom (see page 13)

Fixture Length Use Code from Chart on page14 or specify Custom Length as follows:

* Recommended for full diffusion

45 4500°K

C (12.25") or C (311 mm)

* 2545 LEDs only

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Accessories - More Information on Rough-in Kit on Page 30 ELL - AC - 2SL - MC

ELL - AC - 2SL - AMC

ELL - AC - S123 - AB

ELL - AC - 4SL - WCR - AL

2.50” [63.50mm]

0.54” [13.80mm]

2.00” [50.80mm]

page 18

Fixed Metal Mounting Clip. Fixture extrusion snaps into clip. Allow 1 per 20” (min. 2 per fixture). See page 26.

Adjustable Metal Mounting Clip Offset screws allow flush mounting. Bends to desired angle. Allow 1 per 20” (min. 2 per fixture). See page 26.

Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip). 30° adjustability. Raises fixture 3/8” (9.52mm). Bracket allows repeated angle adjustments, and easier angle adjustments in hard-to-reach areas like ceiling coves. See page 27.

Wall / Ceiling Mounting Rough-in; Specify length to match fixture length. 8-32 flat head screw allows height adjustment for flush installation. (Not walk-over or drive-over rated). See page 30.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W042 1QL Quarter Round Extrusion - Lensed IP54 | Quarter Round extrusion fits snugly into corners for bright, even linear lighting. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Silver, Black, Bronze, White or Custom Finishes. Choice of 2 beam angles using Clear Lenses or 3 Opal diffusion lenses. Weight per foot 0.1899 lb/ft [0.2826 kg/m].

(Beam Angle based on 1QL fixture with Clear Acrylic lens) .69” [17.53mm]

.68” [17.15mm]

94°

.95” [24.13mm]

Photometrics vary based on lens and CCT; see chart on page 11 for data specific to your fixture.

ELL- 1QL - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT

Finish

Lens Options

173 lm/ft, 2.7 w/ft, 1018 87 CRI

24 2400°K *

AL Silver Anodized

PG 94° Clear Acrylic

27 2700°K

BL Black Anodized

30C 30° Clear Acrylic

BR Bronze

OP1 Opal 1, Frosted

2545

366 lm/ft, 5.5w/ft, 87 CRI

30 3000°K

3545

443 lm/ft, 5.5w/ft, 92+ CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

35 3500°K 45 4500°K * 2545 LEDs only

WH White C Custom

RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length

OP2 Opal 2, Medium OP3 Opal 3, Heavy

Factory Installed Options

Wire Exit* C Custom (see page 13)

Use Code from Chart on page 14 or specify Custom Length as follows:

C (12.25") or C (311 mm)

*Note: because of 1QL’s asymmetric form, special care should be used in specifying the Wire Exit (see page 13). 1QL tucked behind lighting valance

The 1QL extrusion has a self-contained mounting flange that allows it to fit tightly into corners, and its 94° beam angle and wide field angle are perfect for fully lighting shelf and undercabinet spaces.

1QL mounted on shelf edge

Where millwork includes a lighting valance, the 1QL fixture tucks neatly inside, as shown at left. If no valance is provided, the fixture’s slim, fully finished back surface ensures an attractive presentation, as shown at right and in the photo below. With black, white, silver, bronze or custom finish options, the 1QL fixture can blend in with, or accent, a wide range of cabinetry finishes.

Drill Hole in Flange

The 1QL’s flange is scored to facilitate easy drilling; mounting holes should be drilled approximately every 20” (minimum two holes per fixture). Screws are provided by others, and should be chosen according to the hole size and installation needs. The 1QL fixture can also be mounted using VHB tape.

When visible, the slim1QL fixture adds an attractive accent to cabinetry

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 19


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W102

1R Round Extrusion - no Lens IP20 | Round extrusion for linear lighting applications. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. No lens. Weight per foot 0.1026 lb/ft [0.1527 kg/m].

116°

Photometrics vary based on CCT; see chart on page 10 for data specific to your fixture.

ELL- 1R - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT

Finish

173 lm/ft, 2.7 w/ft, 1018 87 CRI

24 2400°K *

AL Silver Anodized

27 2700°K

366 lm/ft, 5.5w/ft, 87 CRI

BL Black Anodized

30 3000°K

BR Bronze

443 lm/ft, 5.5w/ft, 3545 92+ CRI

40 4000°K

2545

516 lm/ft, 5.5w/ft, 4545 85 CRI

35 3500°K

Lens Options NL No Lens

Wire Exit WE1 Default

C Custom

45 4500°K * 2545 LEDs only

None

IM

Inside Mount End Caps (see page 29)

Fixture Length

EM

End Mount Leg (see page 32)

Use Code from Chart on page 14 or specify Custom Length as follows:

TM

T-Mount Leg (see page 32)

CM

Corner Mount Leg (see page 32)

BU

Bushing

RO

RoHS Compliant**

C Custom (see page 13)

WH White

Factory Installed Options* N

C (12.25") or C (311 mm)

See pages 32 & 33 for more information about specifying 2RL fixtures in Display Case configurations.

*Finish on Factory Installed Options will match specified finish; see all mounting options on pages 27-32. **See page 25 for list of countries with RoHS or similar restrictions.

Basic Fixture Accessories - For Full Options, See Pages 27, 28 & 29 ELL - AC - 1R -LC

ELL - AC - 1R -SALC

ELL - AC - 1R - MRC

0.73” [18.44mm]

ELL - AC - 1R - PC

page 20

0.62” [115.78mm]

Plastic Mounting Clip; extrusion rotates into clip. Extrusion sits 1/16” (1.59mm) off mounting surface. Details on page 27.

Locking Adjustable Mounting Clip; use one at each end of extrusion, alone or with Plastic Clips; 4-40 set screws lock extrusion at desired angle. Extrusion sits 1/16” (1.59mm) off mounting surface. Details on page 28.

Locking Adjustable Self-Adhesive Clip; use alone or with Plastic Clips; attaches with VHB tape; 4-40 set screws lock extrusion at desired angle. Extrusion sits 1/16” (1.59mm) off mounting surface. Details on page 28.

Metal Mounting Clip; Fixture extrusion rotates into clip. Countersunk screw-hole so fixture sits flush to mounting surface. Allows 60° rotation. Allow 1 per 20” (min. 2 per fixture); Polished Nickel Finish; See page 28.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W112 2RL Round Extrusion - Lensed IP54 | Round extrusion for linear lighting applications. Dry or damp locations. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Choice of 2 beam angles using Clear Lenses or 3 Opal diffusion lenses. Weight per foot 0.1623 lb/ft [0.2415 kg/m].

(Beam Angle based on 2RL fixture with Clear Acrylic lens)

94°

Photometrics vary based on lens and CCT; see chart on page 10 for data specific to your fixture.

ELL- 2RL - _________ - ________ - _________ - _________ - __________ - ____________ - _________ LED

CCT

Finish

173 lm/ft, 2.7 w/ft, 1018 87 CRI

24 2400°K *

AL Silver Anodized

2545

366 lm/ft, 5.5w/ft, 87 CRI

443 lm/ft, 5.5w/ft, 3545 92+ CRI 516 lm/ft, 5.5w/ft, 4545 85 CRI

Lens Options P G 94° Acrylic

27 2700°K

BL Black Anodized

30C 30° Acrylic

30 3000°K

BR Bronze

OP1 Opal 1, Frosted

35 3500°K 40 4000°K

WH White C Custom

Wire Exit

Factory Installed Options*

WE1 Default

N

C Custom (see page 13)

OP2 Opal 2, Medium

Fixture Length

OP3 Opal 3, Heavy

Use Code from Chart on page 14 or specify Custom Length as follows:

45 4500°K * 2545 LEDs only

C (12.25") or C (311 mm)

See pages 32 & 33 for more information about specifying 2RL fixtures in Display Case configurations.

None

IM

Inside Mount End Caps (see page 29)

EM

End Mount Leg (see page 32)

TM

T-Mount Leg (see page 32)

CM

Corner Mount Leg (see page 32)

BU

Bushing

RO

RoHS Compliant**

*Finish on Factory Installed Options will match specified finish; see all mounting options on pages 27 -32 **See page 25 for list of countries with RoHS or similar restrictions.

Basic Fixture Accessories - For Full Options, See Pages 27, 28 & 29 ELL - AC - 2RL - LC

ELL - AC - 2RL -SALC

ELL - AC - 2RL - MRC

0.86” [21.97mm]

ELL - AC - 2RL - PC

0.76” [19.27mm]

Plastic Mounting Clip; Fixture extrusion rotates into clip. Screws to mounting surface. Raises fixture 0.13” (3.18mm). Allows 30° rotation. Allow 1 per 20” (min. 2 per fixture); See page 27.

Locking Adjustable Mounting Clip; Screws to mounting surface. Raises fixture 0.13” (3.18mm). Full rotation with locking screw. Finishes to match fixture. Allow 2 per fixture (48” max span). See page 28.

Locking Adjustable Mounting Clip with Self-Adhesive. Raises fixture 0.13” (3.18mm). Full rotation with locking screw. Finishes to match fixture. Allow 2 per fixture (48” max span). See page 28.

Metal Mounting Clip; . Fixture extrusion rotates into clip. Countersunk screw-hole so fixture sits flush to mounting surface. Allows 60° rotation. Allow 1 per 20” (min. 2 per fixture); Polished Nickel Finish; See page 28..

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 21


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W122

1R & 2RL Picture Lights 1R and 2RL fixtures can be combined with T-Mount legs to create sleek, simple wall mount picture lights. Picture Light fixtures are available in the full range of lumen outputs, color temperatures, lensing (2RL only) and finishes. See three Fixture Width Options, right.

Fixture Width Options (Overall Width) 1

10.44”

[265.18mm]

2

18.32”

[465.33mm]

3

26.20”

[665.48mm]

Set screws allow adjustment of fixture angle. Fixture stem length determines the distance between the front edge of the Picture Light and the mounting surface. Stem Length Options shown are for the MAXIMUM distance between front edge of Picture Light and mounting surface, but fixtures can be adjusted to a shorter distance if desired.

Stem Length Options (Max Overall Distance)

1 12”

[304.8mm]

2 6”

[152.4mm]

Mounting Surface

See opposite page for Picture Light installation information.

ELL- PL - _______ - __________ -___________ - ____________-___________ - ___________-____________ LED

Extrusion Small Round No Lens

1018

Large Round 2 RL Lensed

2545

1R

CCT

Finish

Width

Factory Installed Options*

173 lm/ft, 2.7 w/ft 87 CRI

24 2400°K *

AL Silver Anodized

PG 94° Acrylic

(Options Above)

BL Black Anodized

30C 30° Acrylic

1

366 lm/ft, 5.5w/ft 87 CRI

27 2700°K

1

Stem Length

30 3000°K

BR Bronze

OP1 Opal Acrylic 1

2

2

Stem Length

OP2 Opal Acrylic 2

3

3545

443 lm/ft, 5.5w/ft 92+ CRI

4545

516 lm/ft, 5.5w/ft 85 CRI

35 3500°K 40 4000°K

WH White C Custom

45 4500°K * 2545 LEDs only

Photometrics vary based on extrusion, lens and CCT; see chart on page 10 for data specific to your fixture. MOUNTING PLATE WITH BACK BOX SPECIFICATIONS Accessory: Opening: Weight: Primary Material: MOUNTING PLATE - NO BACK BOX

page 22

Lens Options (2RL Only)

Mounting Kit 22mm 2 lbs. [0.9kg] Cold Rolled Steel SPECIFICATIONS

Accessory: Opening: Weight: Primary Material:

Mounting Kit 22mm 2 lbs. [0.9kg] Cold Rolled Steel

OP3 Opal Acrylic 3

RO

RoHS Compliant**

*Finish on Factory Installed Options will match specified finish; see all mounting options on pages 27-32. **See page 25 for list of countries with RoHS or similar restrictions.

CAT. NO. ELL - AC - MK - PL -26

Description: Rough-in kit for recessed wall installation. Hanger bars included. Cold rolled steel.

CAT. NO. ELL - AC - MK - RC -26

Description: Rough-in kit for recessed wall installation. Hanger bars included. Cold rolled steel.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W122

Mounting-1R & 2RL Picture Light With Rear Access: where rear access is available, installation of a wall-mount Picture Light is simple, using the nut and washer provided to secure the bushing on the back side of the mounting surface. If desired, top plate of bushing can also be attached to mounting surface using 3 screws provided.

Without Rear Access, Option 1: where rear access is not possible, there are two recommended installation methods. The first option uses a pre-manufactured rough-in kit, with or without back box (ELL-AC-MK-PL-26 or ELL-AC-MK-RC-26, page 22). Rough-in kit provides hanger bars for positioning the mounting plate between studs; position and mount rough-in kit, then mark and pre-drill 3 mounting holes into the metal plate. Install drywall over mounting plate, cutting hole for bushing. Insert bushing and secure with screws that are long enough to penetrate through drywall and into mounting plate.

Without Rear Access, Option 2: mount wood block behind drywall to provide a secure anchor for mounting screws. Predrill 3/4” [19.05mm] hole through drywall and wood block. Insert bushing and secure with screws that are long enough to penetrate through drywall and into wood block.

Secure bushing on rear side with nut and washer provided

Use bushing as template and mark 3 holes

Drill 3 holes into Mounting Plate

Drill 3/4” [19.05mm] hole through drywall and wood block

Thread wiring through bushing and insert fixture stem

All Options: feed wire through bushing and insert fixture stem; adjust fixture stem to set Picture Light at desired distance from wall. Use Allen wrench to access lock nut in top plate of bushing to fix stem at desired postion. Driver can be located remotely, or in J-Box at outlet height.

Drywall

page 23 Adjust distance from wall and lock in place

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W132

1EL Demi-Ellipse Extrusion - Lensed IP20 | Demi-Ellipse extrusion provides a low-profile fixture with recessed LED board to minimize side-view glare. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Diffuser Film Lens. Weigt per foot 0.3300 lb/ft [0.4911 kg/m].

94°

Photometrics vary based on CCT; see chart on page 11 for data specific to your fixture..

1EL - _________ - _________ - __________ - _________ - __________ - ____________ - __________ CCT

LED

Finish

1018

173 lm/ft, 2.7 w/ft, 87 CRI

24 2400°K *

AL Silver

27 2700°K

2545

366 lm/ft, 5.5w/ft, 87 CRI

BL Black

30 3000°K

BR Bronze

3545

443 lm/ft, 5.5w/ft, 92+ CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

35 3500°K

Lens Options DF Diffuser Film

Wire Exit WE1 Default C Custom (see page 13)

WH White

Factory Installed Options RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length

C Custom

Use Code from Chart on page 14 or specify Custom Length as follows:

45 4500°K * 2545 LEDs only

C (12.25") or C (311 mm)

Fixture Accessories ELL - AC - 1EL - MC

page 24 Fixed Metal Mounting Clip; Fixture extrusion snaps into clip. Countersunk screw-hole so fixture sits flush to mounting surface. Allow 1 per 20” (min. 2 per fixture). See page 27.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs Details Product Listings:

EssentialLEDs Interior Linear products are ETL Listed to UL Standards 2108, 8750 & 962. UL 2108 covers UL Standard for Safety Low Voltage Lighting Systems, with listing for both surface mount and recessed mount installations. It also covers special testing requirements for mounting of EssentialLEDs linear products (lensed extrusions only) in closet applications as defined in the National Electrical Code, NFPA-70, article 410.16. UL 8750 covers UL Standard for Safety for Light Emitting Diode ((LED) Equipment for use in lighting products. UL 962 covers UL Standard for Safety Household and Commercial Furnishings, including residential and commercial applications such as lighted curio cabinets, display cases, office furnishings, shelving units, kiosks, bathroom cabinets, etc. All testing done by Intertek Testing Services NA, Inc. In addition, all EssentialLEDs Interior Linear products are California Title 24 certified (Manufacturer Code: VTE, Brand Code EL4); this certification recognizes EssentialLEDs Linear products as high efficacy LED products, in compliance with the applicable provisions in the California Energy Commission’s Appliance Efficiency Regulations. More information can be found at http://www.title24-ca.com/title24-articles/title24-standards/ If desired, all EssentialLEDs products can be specified RoHS compliant (Restriction of Hazardous Substances Directive), insuring products will not contain any of the following substances: lead (Pb), mercury (Hg), cadmium (Cd), Hexavalent chromium (Cr6+), Polybrominated biphenyls (PBB) or Polybrominated diphenyl ether (PBDE). EU Countries that require RoHS compliance include Austria, Belgium, Bulgaria, Cyprus, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden and the United Kingdom. Countries requiring RoHS or “similar” restrictions include Canada, China, Japan, New Zealand, South Korea.

Custom Fixture Configurations:

The exceptional light quality, wide variety of extrusions and flexible length options make EssentialLEDs linear products an ideal component for use in custom fixture designs. Specifiers can incorporate EssentialLEDs fixtures as the light source in custom fixtures fabricated by others, as in the example detailed below. As another option, 1R & 2RL extrusions can be combined with End Mount, T-Mount and Corner Mount legs/joints (page 32) to create custom fixtures for ceiling mount or suspended installation.

Downlight portion of custom pendant fixture consists of 2 rows of 1S extrusion inside a lensed compartment; uplight portion consists of a single run of 2RL atop each length. Custom fixture designed by Lam Partners, Cambridge, MA. Photos courtesy of Lam Partners.

Motion Sensors and Pressure Switches:

For the ultimate in convenience, EssentialLEDs Interior Linear products can be wired with either motion sensors or pressure switches to provide automatic on-and-off control in “closed” areas such as cabinets, drawers, pantries, closets, safes, and other similar spaces. You’ll find these with our other wiring accessories on page 76.

Coming 1st Quarter 2014! HELD Drivers: LED linear fixtures provide great low-energy, long-lasting task lighting for kitchens and similar locations. Unfortunately, NEC installation codes have made retro-fitting of these locations a challenge until now. Most current under cabinet options - fluorescent, xenon or halogen - run line voltage directly to the fixture, but it has not been possible to run line voltage to an LED driver outside an NEC-approved junction box. The new HELD driver (Hybrid Electronic Linear Driver) solves this problem by including a junction box within the body of the driver itself. As long as the driver is mounted against the wall surface, it will conform with all current NEC restrictions. HELD drivers have a low profile (10.75”L x 2.25”W x 1.375”H [273mm L x 57.2mm W x 35mm]) and are easy to tuck inconspicuously in undercabinet applications. 48w and 96w units available; see page 65.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 25


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X062

Mounting Options All EssentialLEDs linear products are ETL listed for both surface and recessed mount applications. FIXED METAL CLIP - 1S

SPECIFICATIONS Dimensions: Material:

FIXED METAL CLIP - 2SL, 1S*

0.34” x 0.42” [8.7mm x 10.66mm] 301 Stainless Steel

SPECIFICATIONS Dimensions: 0.43” x 0.59” [10.9mm x 15.0mm] Material: 301 Stainless Steel *When 1S is specified with Slide-On Lens

FIXED METAL CLIP - 4SL

CAT. NO.

Description: Fixed Metal Clip for mounting small (1S) square extrusion with No Lens. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

FIXED METAL CLIP - 3SL

SPECIFICATIONS

Dimensions: 1.12” x 1.09” [28.4mm x 27.7mm] Material: 301 Stainless Steel

ADJUSTABLE METAL CLIP - 1S

SPECIFICATIONS Dimensions: Material:

ADJUSTABLE METAL CLIP - 2SL, 1S*

0.33” x 0.71” [8.51mm x 18.03mm] 301 Stainless Steel

SPECIFICATIONS

Dimensions: Material:

0.43” x 0.84” [10.87mm x 21.39mm] 301 Stainless Steel *When 1S is specified with Slide-On Lens

ADJUSTABLE METAL CLIP - 4SL

ADJUSTABLE METAL CLIP - 3SL

SPECIFICATIONS

page 26 Dimensions: Material:

1.12” x 1.31” [28.52mm x 33.22mm] 301 Stainless Steel

ELL - AC - 4SL - MC

Description: Fixed Metal Clip for mounting extra depth (4SL) square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

ELL - AC - 3SL - MC

Description: Fixed Metal Clip for mounting large (3SL) square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

ELL - AC-1S - AMC

Description: Adjustable Metal Clip for mounting small (1S) square extrusion with No Lens. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

ELL - AC - 2SL - AMC

Description: Adjustable Metal Clip for mounting medium (2SL) square extrusion and small (1S) square extrusion with SLC lens. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

Dimensions: 0.98” x 0.94” [24.99mm x 23.92mm] Material: 301 Stainless Steel

ELL- AC - 2SL - MC

Description: Fixed Metal Clip for mounting medium (2SL) square extrusion and small (1S) square extrusion with SLC lens. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

Dimensions: 0.98” x 0.63” [24.99mm x 16.20mm] Material: 301 Stainless Steel

ELL - AC - 1S - MC

ELL - AC - 4SL - AMC

Description: Adjustable Metal Clip for mounting extra depth (4SL) square extrusion. Offset screw plate allows flush mount or one-time adjustement to desired angle. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO. ELL - AC -3SL - AMC

Description: Adjustable Metal Clip for mounting large (3SL) square extrusion. Offset screw plate allows flush mount or onetime adjustement to desired angle. Allow 1 per 20” of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X062

adjustable metal clips for

1s , 2sl , 3sl and 4sl extrusions allow fixtures to be attached in a variety of mounting surface positions and allow one-time adjust-

ment to desired angle . see examples below . first press fixture into clips , then gently bend clips to desired angle . not intended for repeated adjustments .

ADJUSTABLE BRACKET - 1S, 2SL, 3SL, 4SL

SPECIFICATIONS

Dimensions: 1.31” x 0.51” x 0.50” [33.32mm x 12.95mm x 12.7mm]

Material: 304 Stainless Steel

1EL MOUNTING CLIP

SPECIFICATIONS

0.22” [5.84mm]

Dimensions: 1.59” [40.36mm] x 0.22” [5.84mm] Material: Stainless Steel

SPECIFICATIONS

PLASTIC CLIP - 1R

Dimensions: 0.51” x 0.58” [13.0mm x 14.72mm] Material: ABS Plastic

PLASTIC CLIP - 2RL

SPECIFICATIONS

Dimensions: 0.62” x 0.73” [15.64mm x 18.60mm] Material: ABS Plastic

CAT. NO. ELL-AC-S 123 -AB Description: Adjustable Metal Bracket for use with Fixed Metal Mounting Clip (one bracket per clip, ordered separately). Allows repeated 30° angle adjustability of 1S, 2SL, 3SL or 4SL square fixtures. Screws to mounting surface with screw, provided. Raises fixture 3/8” (9.52mm) off mounting surface. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO. ELL - AC- 1 EL - MC Description: Fixed Metal Clip for mounting small (1EL) demiellipse extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screws provided). Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO. ELL - AC - 1R - PC

Description: Plastic Clip for mounting small (1R) round extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Raises fixture 0.13” (3.18mm). Allows 30° rotation. Allow 1 per 20” of extrusion (min. 2 per fixture).

CAT. NO. ELL - AC- 2RL - PC Description: Plastic Clip for mounting medium (2RL) round extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Raises fixture 0.13” (3.18mm). Allows 30° rotation. Allow 1 per 20” of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 27


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X062

All EssentialLEDs linear products are ETL listed for both surface and recessed mount applications. and must be specified on fixture configurator. LOCKING CLIP -1R

SPECIFICATIONS Dimensions: 0.87” x 0.73” [22.13mm x 18.44mm] Material: Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

LOCKING CLIP -2RL

SPECIFICATIONS Dimensions: 1.01” x 0.86” [25.62mm x 21.979mm] Material: Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

0.73” [18.44mm]

SELF-ADHESIVE LOCKING CLIP

0.62” [15.78mm]

0.86” [21.97mm]

SELF-ADHESIVE LOCKING CLIP

0.76” [19.27mm]

METAL ROUND CLIP - 1R

SPECIFICATIONS Dimensions: 0.87” x 0.73” [22.13mm x 18.44mm] Material: Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS Dimensions: 1.01” x 0.86” [25.62mm x 21.979mm] Material: Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS Dimensions: 0.47” x 0.48” [12.02mm x 12.11mm] Material: 301 Stainless Steel Finish Polished Nickel

METAL ROUND CLIP - 2RL

page 28

SPECIFICATIONS Dimensions: 0.60” x 0.61” [15.33mm x 15.50mm] Material: 301 Stainless Steel Finish: Polished Nickel

n Options marked by red dots are factory-installed

CAT. NO. ELL - AC- 1R - LC-

AL Description: Locking Adjustable Clip for mounting small (1R) round BL e xtrusion. Screws to mounting surface with screw, provided. Raises BZ fixture 0.13” (3.18mm). Full rotation with locking set screw. Allow 2 WH per fixture (1 at each end) with 48” [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 2RL - LC-

AL Description: Locking Adjustable Clip for mounting medium (2RL) BL round extrusion. Screws to mounting surface with screw, provided. BZ WH Raises fixture 0.13” (3.18mm). Full rotation with locking set screw. Allow 2 per fixture (1 at each end) with 48” [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 1R - SALC -

AL Description: Locking Adjustable Clip for mounting small (1R) round BL extrusion. VHB tape provides self-adhesive attachment to any sur- BZ face. Raises fixture 0.13” (3.18mm). Full rotation with locking set WH screw. Allow 2 per fixture (1 at each end) with 48” [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC- 2RL - SALC AL Description: Locking Adjustable Clip for mounting medium (2RL) BL round extrusion. VHB tape provides self-adhesive attachment to any BZ surface. Raises fixture 0.13” (3.18mm). Full rotation with locking set WH screw. Allow 2 per fixture (1 at each end) with 48” [1279.2mm] max span between. Add Plastic Mounting Clips in between for longer spans. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 1R - MRC Description: Cylindrical Metal Clip for mounting small (1R) round extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screw provided). Fixture extrusion snaps into clip. Allows 60° rotation. Allow 1 per 20” of extrusion (min. 2 per fixture). CAT. NO.

ELL- AC - 2RL - MRC

Description: Cylindrical Metal Clip for mounting medium (2RL) round extrusion. Countersunk screw-holes allows fixture to mount flush to surface (#4 screw provided). Fixture extrusion snaps into clip. Allows 60° rotation. Allow 1 per 20” of extrusion (min. 2 per fixture).

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X062

BUSHING - 1 R

SPECIFICATIONS Dimensions: 1.50” x 1.00” [38.10mm x 25.40mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

BUSHING - 2RL

SPECIFICATIONS

ELL - AC - 1R - BU -

AL

lDescription: Threaded Bushing with nut for mounting BL

small (1R) round extrusion perpendicular to the mounting BZ surface. Factory Installed – must be specified on product WH configurator (page 20). Requires only 1 per extrusion for vertical mount with 20” [508mm] max height. 3/4-16 thread size. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO.

ELL - AC - 2RL - BU AL

Dimensions: 1.50” x 1.13” [38.10mm x 28.58mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated INSIDE MOUNT END CAP - 1 R

SPECIFICATIONS Dimensions: 0.50” x 0.69” [12.70mm x 17.44mm] Material: Machined 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

INSIDE MOUNT END CAP - 2 RL

SPECIFICATIONS Dimensions: 0.63” x 0.79” [15.88mm x 20.14mm] Material: 6061 Aluminum Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

ADJUSTABLE INSIDE MOUNT RING - 1 R Dimensions: Material: Thickness: Finish:

Inside Dim. 0.51”[13.08mm] for 1R Extrusion

ADJUSTABLE INSIDE MOUNT RING - 2 RL

Inside Dim. 0.64”[16.26mm] for 2RL Extrusion

CAT. NO.

SPECIFICATIONS 1.25” [31.75mm] 6061 Aluminum 0.19” [4.83mm] Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated SPECIFICATIONS

Dimensions: Material: Thickness: Finish:

1.25” [31.75] 6061 Aluminum 0.19” [4.83mm] Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

lDescription: Threaded Bushing with nut for mounting BL

medium (2RL) round extrusion perpendicular to the mount- BZ ing surface. Factory Installed – must be specified on product WH configurator (page 21). Requires only 1 per extrusion for vertical mount with 20” [508mm] max height. 7/8-20 thread size. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 1 R - IM -

lDescription: : Inside Mount End Cap for mounting small AL

(1R) round extrusion to insides of cabinetry (using #4 screws, BL BZ provided). Factory Installed – must be specified on product con- WH figurator (page 20). Requires 2 per fixture with 48” [1279.2mm] max span between. Tab extends 0.19” [4.74mm] beyond fixture diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC - 2 RL - IM AL lDescription: Inside Mount End Cap for mounting me- BL dium (2RL) round extrusion to insides of cabinetry (using #4 BZ screws, provided). Factory Installed – must be specified on WH product configurator (page 21). Requires 2 per fixture with 48” [1279.2mm] max span between. Tab extends 0.17” [4.26mm] beyond fixture diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO.

ELL - AC - 1 R - IMR -

AL Description: Adjustable Inside Mount Ring for mounting BL small (1R) round extrusion to insides of cabinetry (using #6 FH BZ WH screws, provided). Allows 60° rotation. Requires 2 per fixture with 48” [1279.2mm] max span between. 1.25” [31.75mm] diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO.

ELL - AC - 2 RL - IMR -

Description: Adjustable Inside Mount Ring for mounting medium (2RL) round extrusion to insides of cabinetry (using #6 FH screws, provided). Allows 60° rotation. Requires 2 per fixture with 48” [1279.2mm] max span between. 1.25” [31.75mm] diameter. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture.

AL BL BZ WH

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 29


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X072

Special Mounting Options 3Sl & 4SL 3SL WALL/CEILING ROUGH-IN KIT

SPECIFICATIONS

CAT. NO. ELL - AC - 3SL - WCR - AL

2.50” [63.50mm]

1.02” [25.91mm]

Dimensions: 2.50” x 2.53” [63.50mm x 64.14mm] Material: Anodized Aluminum Weight: 1.47 lbs/ft [2.18 kg/m]

Description: : Rough-in extrusion for mounting large (3SL) square extrusion in wall or ceiling applications. Specify length to match fixture length. 8-32 flat head screw allows height adjustment of fixture within rough-in for an installation flush to the finished wall or ceiling surface. Rough-in includes all necessary fixture mounting clips. (Note: System is not currently rated for use in walk-over or driveover applications)

2.53” [64.14mm]

4SL WALL/CEILING ROUGH-IN KIT

SPECIFICATIONS

CAT. NO. ELL - AC - 4SL - WCR - AL

2.50” [63.50mm]

0.54” [13.80mm]

Dimensions: 2.50’” x 2.00” [63.50mm x 50.80mm] Material: Anodized Aluminum Weight: 1.03 lbs/ft [1.53 kg/m]

Description: Rough-in extrusion for mounting extra depth (4SL) square extrusion in wall or ceiling applications. Specify length to match fixture length. 8-32 flat head screw allows height adjustment of fixture within rough-in for an installation flush to the finished wall or ceiling surface. Rough-in includes all necessary fixture mounting clips. (Note: System is not currently rated for use in walk-over or driveover applications)

2.00” [50.80mm]

Two applications using Wall/Ceiling Rough-In Kits: 3SL in ceiling installation, 3SL & 4SL “vanity” lighting in millwork installation

page 30

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X072

Special Mounting Options 3Sl & 4SL Wall/Ceiling Rough-in Kits enable clean, flush installation of 3SL & 4SL extrusions into wall and ceiling surfaces, primarily for use with typical drywall surfaces and stud wall construction. Rough-in Kit is recommended for use in “direct view” applications where Opal lensing fully diffuses the LEDs and creates a solid “line of light”. Not suitable for floor or ground installation. The diagrams and photos below provide a brief overview of how Wall/Ceiling Rough-in Kits are installed.

1. Drill Extrusion:

Drill mounting holes along each side of the extrusion approximately every 16” to 24”, or to conform to the structural elements in your application. For plenum installations, wiring chaseway area of extrusion can be drilled into for connection of electrical conduit.

Connector for Electrical Conduit

Wiring Chaseway

2. Position Mounting Clip Assembies:

The Mounting Clip Assemblies hold the fixtures in place and should be spaced 16” OC, with a minimum 2 per fixture. Use set screws to lock clip assemblies in position.

Set Screws

3. Set Fixture Height:

Adjust screw head to exactly 1” below top edge of extrusion

The #8 flat head Philips screw in each Mounting Clip Assembly sets the depth of the fixture in the mounting extrusion. The head of each screw should be adjusted to exactly 1” below top edge of extrusion. 1”

Wood or metal stud, or blocking provided by others

4. Install Mounting Kit Extrusion:

Attach mounting extrusion to structural stud or blocking. Extrusion is designed for drywall to be “mudded up” to the extrusion edge, for a clean, flush finished installation.

Wiring Chaseway

2.50” [63.50mm] Between extrusion mounting surface and finished drywall surface

Screw Mounting Kit Extrusion to structure

Top edge of Mounting Kit Extrusion should align with finished drywall surface; mud up to edge for clean finish

5. Install Fixtures:

Insert fixtures in mounting clip assemblies; run wiring behind fixture in chaseway provided. If desired, slight gap between fixture and extrusion can be sealed using clear silicone sealant.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 31


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X082

Special Mounting Options - 1R & 2RL Display Case Applications: Both 1R and 2RL fixtures can be combined with End-Mount, T-Mount or Corner Mount Legs to create a highly-customized display

fixture system. (Fig. A) 0pposite details the dimensions to be considered when designing a basic two-legged fixture. For more complex configurations that include our T-Mount and Corner Mount Leg components (Fig. B) please visit the website and download the worksheet at www.essentialleds.com. Glass showcases can also be configured using a single leg support and a Self-Adhesive Locking Clip (page 28) which adheres directly to the glass surface (Fig. C). n Options marked by red dots are factory-installed and must be specified on product configurator. END MOUNT LEG

SPECIFICATIONS

CAT. NO. ELL - AC -

- EM -

1R 2RL Dimensions: 8mm leg ; 0.63” (15.88mm) diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

T -MOUNT LEG

SPECIFICATIONS

CORNER MOUNT LEG

SPECIFICATIONS

page 32

AL BL BZ WH

Installed – must be specified on product configurator (page 20 or 21). End Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1” to 18” [25.4mm to 457.2mm]. Max recommended span between uprights is 48” [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture.

CAT. NO. ELL - AC -

- TM -

6 12 18

-

AL BL BZ WH

lDescription: T-Mount Leg for connecting two 1R or 2RL round extrusions in a straight line. Multiple T-Mount Legs can be used to create extended display case fixturing. Factory Installed – must be specified on product configurator (page 20 or 21). T-Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1” to 18” [25.4mm to 457.2mm]. Max recommended span between uprights is 48” [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture. CAT. NO. ELL - AC -

- CM -

1R 2RL Dimensions: 8mm leg; 0.63” (15.88mm)diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

-

lDescription: End Mount Leg for 1R or 2RL round extrusions. Factory

1R 2RL Dimensions: 8mm leg; 0.63” (15.88mm)diameter extrusion Material: Anodized Aluminum Weight: Variable Finish: Silver (AL), Black (BL) Anodized; Bronze (BZ) or White (WH) Powder Coated

6 12 18

-

6 12 18

AL BL BZ WH

lDescription: : Corner Mount Leg for connecting two 1R or 2RL round extrusions at a 90° angle. Multiple Corner Mount Legs can be used to create extended display case fixturing in unique shapes. Factory Installed – must be specified on product configurator (page 20 or 21). Corner Mount Leg includes Ø8mm upright, threaded bushing with hardware and cover plate. Legs are adjustable and field cuttable to achieve fixture height of 1” to 18” [25.4mm to 457.2mm]. Max recommended span between uprights is 48” [1279.2mm]. Silver (AL), Black (BL), Bronze (BZ) or White (WH) finish to match fixture.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X082 EXTRUSION LENGTH PLUS 2.62” (66.5mm) EQUALS OVERALL WIDTH OF FIXTURE 0.81” (20.6mm)

ELBOW JOINTS ADD 1.62” (41.1mm) TO OVERALL WIDTH 0.81” (20.6mm) EACH SIDE

Fig. A

0.5”

ALLOW MINIMUM 0.5” (12.7MM) ON EACH SIDE OF FIXTURE TO ACCOMODATE MOUNTING COVER PLATE

(12.7mm)

0.81 ” (20.6mm)

0.5”

(12.7mm)

Typical two-legged configuration

LEGS ARE ADJUSTABLE & FIELD CUTTABLE TO ACHIEVE FIXTURE HEIGHT OF 1” TO 18” (25.4mm to 457.2mm)

MOUNTING COVER PLATE

Combine 1R and 2RL extrusions with Corner Mount, T-Mount & End Mount Legs to create custom configurations for showcases, picture lights, suspended fixtures & more. Stems available for variable heights up to 18”.

1.25”

(31.8mm)

1.55"

0.71”

(39.4mm)

(18mm)

Fig. C

Fig. B Center to Center

Center to Center

Cutout Dimension for Bushings

Single-legged configurations can be attached to glass surfaces using Self-Adhesive Locking Clip (pg. 28). One clip every 12”-16”

For configurations with three or more legs, see worksheet at www.essentialleds.com

1. Installation with Underside Access:

3/4” (19.05mm) A. Install Bushing and Secure with Nut Provided

Height Adjustment

B. Feed Wire Through Bushing

2. Installation with Topside Access Only Use Allen Wrench in Base Plate to Adjust and Fix Height of Uprights

A. Use Bushing as Template to Mark and Drill 4 Holes

B. Use Screws Provided to Attach Bushing to Top Surface

C. Feed Wire Through Bushing

page 33

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X092

Constant Voltage Wiring Accessories Connectors Fixtures come with 96” [2.44m] of 20 AWG wire and male Tyco Mate ‘n Lock connector as standard; customization available; connector can be removed for hard wired installation. Starter, splitter and interconnect wiring accessories available for easy installation; see below.

Male

0.55” L x 0.28” W x 0.35”H [14mm x 7mm x 8.8mm]

Female

0.67” L x 0.28” W x 0.19”H [17mm x 7mm x 5mm]

Starter Cables have bare wires on one end to connect directly to LED driver terminals or to wires via wire nuts, and one (1) female connector for connection to a linear fixture, splitter accessory, or interconnect wire. Splitters connect multiple fixtures to a single driver; 2- way, 4-way or 8-way options; one (1) male connector, multiple female connectors. Interconnect Wires extend wiring between driver and fixture or between splitter accessory and fixture; (1) one female connector, (1) one male connector. All Wiring Accessories are ETL Listed (UL 2108), when used as part of an EssentialLEDs system. 2 FT or 8 FT STARTER CABLE

SPECIFICATIONS

2

INTERCONNECT WIRES

ELL - AC - CV - SC -

Description: Starter Cable with bare wires on one end and a female connector on the other. Bare wires connect to LED driver terminals or to other wires (via wire nuts, not included). Female connector is for direct connection to an EssentialLEDs Linear fixture, a Splitter or an Interconnect Wire. 20 AWG wire. Available in 2’ or 8’ lengths.

2- , 4- or 8 - WAY SPLITTER

8.00” (203.20mm)

CAT. NO.

SPECIFICATIONS

x2 x4 x8

CAT. NO. ELL - AC - CV - SPL -

Description: Wire Splitter with 1 male connector and 2, 4 or 8 multiple female connectors. Allows for easy connection of multiple fixtures to a single LED Driver. Male connector is for connection to a Starter Cable, another Splitter or an Interconnect Wire. Female connectors are for direct connections to an EssentialLEDs Linear fixtures, other Splitters or Interconnect Wires. Overall length is 8” with each female connector being 3” long. 20 AWG wire.

SPECIFICATIONS

2 8

2 4 8

CAT. NO. ELL - AC - CV - ICW -

Description: Interconnect Wire with 1 male and 1 female connector for extending connections between LED Drivers and EssentialLEDs Linear fixtures or between LED Drivers and Wire Splitters. Also for use in “daisy chain” connections between fixtures (see “Daisy-Chain Termination” on page 13). 20 AWG wire. Available in 2’, 4’, 5’ and 10’ lengths.

page 34

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

2 4 5 10


Visual Lighting Technologies

EssentialLEDs Notes: __________________________________________________

______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________ ______________________________________________________

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 35


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W142

Interior Flexible Fundamentals

EFlex Flexible LEDs put all the great light quality of EssentialLEDs into a bendable format that’s perfect for curved surfaces like coves and columns. The selfadhesive backing makes EFlex a quick and easy way to add lighting accents to a variety of interior locations. Five color temperatures that are a perfect match to our other linear and panel products. EFlex Flexible LEDs are perfect for:

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1022 LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

1022 APPLIED LED

Nichia 157

LUMEN OUTPUT

169 lm/ft [554 lm/m]

LED WATTAGE

.10w

LED EFFICACY*

108 lm/w

POWER CONSUMPTION

2.2w/ft. [7.2w/m]

COUPON LENGTH

3.44” [87.5mm]

CCT OPTIONS

EXCEPT 2400

CRI

• Under Counters & Toe Kicks • Accents for Coves & Niches • Uplights Above Cabinetry • Halo Effects Behind Headboards, Mirrors & Entertainment Centers

87

page 36

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

ELECTRICAL

LENGTHS FINISH LENSING

All photometrics based on 3500K CCT

None

White silk screen 0.393” [10.0mm] wide x 0.050” [1.25mm] high and up to 22.96’ [7000mm]; field cuttable in 3.44” [87.5mm] coupons Driver Type: Constant Voltage, Class 2 UL recognized (ETL Listed as a system) Input Voltage: 24v DC Dimming: Magnetic Low-Volatge Dimmer with HMLD Driver, Electronic Low-Volatge with HELD Driver or via 0-10 volt with electronic driver Feed Wire: 12” [300m] of 20 AWG Wire [1.02mm2] with Male Connector or 4’[1219.2mm] of 18 AWG Wire [1.02mm²] with Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 50° C] 50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

EFlex Flexible LEDs use .10w LEDs at only 2.2w per linear foot, and can be purchased as either pre-cut/wired lengths or by the spool. EFlex can be cut in the field every 3.44” [87.5mm]. 87 CRI. EFlex is dimmable using either Magnetic or Electronic dimmable drivers, or with an electronic driver and 0-10v module. Visit the VLT website for application photos and the most recent IES files.

MADE in USA

3M VHB Tape, provided (UL 2108 & 8750);

from

RoHS Compliant (if specified); LM79, LM80 ; Title 24, Dry Location

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

.88

1.0

1.0

1.08

1.08

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W142

EFlex Flexible LEDs - Interior Flexible LED strip for interior linear lighting applications. Dry location. Includes .10w Nichia 157 LEDs (169 lm/ft, 2.2 w/ft, 87 CRI) on a flexible, self-adhesive substrate. Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. ±60K Micro Binning. Available pre-cut into 3.44” [87.5mm] “coupons”, or as a field-cuttable spool of 22.96 ft [7000mm]. See page 34 for EFlex Wiring Accessories.

EFlex- __________ - _________ - _________ - __________ - __________ - ___________ LED 1022

CCT

.10w

27 2700°K

Lens Options NL No Lens

Factory Installed Options

Wire Exit

RO

WE1 Default

30 3000°K 35 3500°K 40 4000°K

Strip Length

45 4500°K

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

3.44” increments up to 22.9’ long [87.5mm increments up to 7004mm long]

.072” [1.82mm]

3.44” [87.5mm] .400” [10.16mm]

+24VDC GND

3.44” [87.5mm] +24VDC GND

+24VDC GND

+24VDC GND

page 37

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W152 #XXXXX

Exterior Flexible Fundamentals

EFlexW Flexible LEDs slips all the great light quality of EssentialLEDs into a weatherproof silicone sheathing that’s perfect for outdoor architectural applications, especially when you need high light output from small areas & curvilinear surfaces. EFlexW is a quick and easy way to add lighting accents to a variety of exterior locations, in five color temperatures that are a perfect match to our other EssentialLEDs products.

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1022 LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

1022 APPLIED LED

Nichia 157

LUMEN OUTPUT

169 lm/ft [554 lm/m]

LED WATTAGE

.10w

LED EFFICACY*

108 lm/w

POWER CONSUMPTION

2.2w/ft. [7.2w/m]

COUPON LENGTH

3.44” [87.5mm]

CCT OPTIONS

EXCEPT 2400

CRI

87

EFlexW Flexible LEDs are perfect for adding linear lighting accents in outdoor locations such as:

LENSING FINISH

White silk screen

LENGTHS

0.492” [12.5mm] wide x 0.157” [4.0mm] high and up to 22.96’ [7004mm]; end caps add .045” [1.14mm] to length of LED strip. Driver Type: Constant Voltage, Class 2 UL recognized (ETL Listed as a system) Input Voltage: 24v DC Dimming: Magnetic Low-Volatge Dimmer with HMLD Driver, Electronic Low-Volatge with HELD Driver or via 0-10 volt with electronic driver Feed Wire: 12” [300m] of 20 AWG Wire [1.02mm2] with Male Connector or 4’[1219.2mm] of 18 AWG Wire [1.02mm²] with Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 50° C]

page 38

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

Silicone sheathing

ELECTRICAL

All photometrics based on 3500K CCT

• Curved Sit Walls and Planters • Patios and Outdoor Kitchens • Water Features

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

EFlexW Flexible LEDs use .10w LEDs at only 2.2w per linear foot, and are available in pre-cut wired and sheathed lengths. 87 CRI. EFlexW is dimmable using either Magnetic or Electronic dimmable drivers, or with an electronic driver and 0-10v module. Visit the VLT website for application photos and the most recent IES files.

MADE in USA Silicone brackets, screwed (UL 2108 & 8750);

RoHS Compliant (if specified); LM79, LM80 ; Title 24, IP67 (Wet Location)

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

.88

1.0

1.0

1.08

1.08

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W152 #XXXXX

EFlexW Flexible LEDs - Exterior IP67 | Flexible LED strip for exterior and wet location linear lighting applications. Includes .10w Nichia 157 LEDs (169 lm/ft, 2.2 w/ft, 87 CRI) on a flexible substrate and sealed into a weatherproof silicone sheathing. Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. ±60K Micro Binning. Specify pre-cut “coupon” length in 3.44” [87.5mm] segments up to 22.96 ft [7000mm]. End caps add .045” [1.14mm] to each end of LED strip length. Mounts using screwed silicone brackets on 12” centers. See below for bracket information. See page 43 for EFlexW Wiring Accessories.

EFlexW - __________ - _________ - _________ - _________ - __________ - __________ LED 1022

CCT

.10w

27 2700°K

Lens Options

Factory Installed Options

Wire Exit

NL No Lens

RO

WE1 Default

30 3000°K

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

35 3500°K 40 4000°K

Strip Length

45 4500°K

3.44” increments up to 22.9’ long [87.5mm increments up to 7004mm long]

3.44in increments up to 22.9ft long [87.5mm increments up to 7004mm long]

SOFT BRACKET

SPECIFICATIONS

Dimensions: 1.095” [27.81mm] x 0.210” [5.33mm] Material: Silicone

CAT. NO. ELL-AC - EFLEXW - SB

Description: Silicone bracket straddles sheathed EFLEXW strip; screws to mounting surface on each end (screws provided by others). Recommended spacing: every 12”.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 39


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W162

Exterior Linear Fundamentals Applied LEDs: Nichia 157 LED or Nichia 757 LED (up to 30% brighter). All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. All LEDs available in 2700K, 3000K, 3500K, 4000K & 4500K. 157 LED .25w also available in 2400K. 1018

2545

3545

4545

APPLIED LED

Nichia 157

Nichia 157

Nichia 757

Nichia 757

LUMEN OUTPUT

169 lm/ft [554 lm/m]

366 lm/ft [1200 lm/m]

443 lm/ft [1453 lm/m]

516 lm/ft [1692 lm/m]

LED WATTAGE

.10w

.25w

.25w

.25w

LED EFFICACY*

108 lm/w

108 lm/w

110 lm/w

126 lm/w

POWER CONSUMPTION

2.7w/ft. [8.9w/m]

5.5w/ft. [18.0w/m]

5.5w/ft. [18.0w/m]

5.5w/ft. [18.0w/m]

CCT OPTIONS

EXCEPT 2400K

ALL

EXCEPT 2400K

EXCEPT 2400K

87

87

92+

85

LED Board

CRI

LENSING FINISH

All fixtures available in silver, black, bronze or white powder coated finish; custom finishes on request

LENGTHS

Up to 72” [1830mm]; see Length & Wattage Table (page 41) for all standard length options Driver Type: Constant Voltage, Class 2 UL Recognized (ETL Listed as a system) Input Voltage: 24vDC Dimming: Magnetic Low-Voltage Dimmer with HMLD Driver, Electronic Low-Voltage with HELD Driver or via 0-10 volt with Electronic Driver Feed Wire: 1’ [2.44m] of 18 AWG Wire [1.02mm2] with Male Connector or 4’ [1219.2mm] of 18 AWG Wire [1.02mm2] with Bare Wire Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

page 40

LISTINGS & TESTS

MOUNTING

LIFE & WARRANTY

94° Clear Lens or choice of three opal acrylic lenses; see page 12 for more information about lensing choices, and page 11 for photometric comparisons.

ELECTRICAL

*Based on 3500K CCT

50,000 HR lifetime (Ta= -25°C to 50°C; Tc max 75°C); 5 year limited warranty

Fixed Mounting Clips

(UL 2108, 8750);

Choose from 4 LED Boards for a Range of Lumen Outputs and CRI Options!

LINEAR LEDs EssentialLEDs Exterior Linear products provide bright and even linear lighting for applications such as: • Architectural Accents • Exterior Wall, Pillar & Wall Grazing • Sit Walls & Planters • Handrails • Outdoor Kitchens & BBQs • Waterfalls & Other Water Features • Exterior Signage Also recommended for interior use in spas, showers and water features. EssentialLEDs Linear products offer .10w and .25w LEDs option in a range of CRI and color temperature options. EssentialLEDs Linear products are dimmable and available in custom lengths up to 72”[1830mm]. Visit the VLT website for application photos and the most recent IES files.

MADE in USA RoHS Compliant (if specified); LM79, LM80 ; Title 24, IP67 (Wet Location)

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 41.

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W162 5SLW Square Extrusion - Exterior IP67 | Exterior rated square extrusion for linear lighting applications. Includes Nichia LEDs with either 1018 LED Board (157 LED, 173 lm/ft, 2.7 w/ft, 87 CRI), 2545 LED Board (157 LED, 366 lm/ft, 5.5 w/ft, 87 CRI), 3545 LED Board (757 LED, 443 lm/ft, 5.5 w/ft, 92+ CRI), or 4545 LED Board (757 LED, 516 lm/ft, 5.5 w/ft, 85 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. (2545 LED Board also in 2400K.) All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Choice of 94° (standard) or 3 Opal diffusion lenses. Mounting options on page 42. Weight per foot 0.3603 lb/ft [0.5362 kg/m]. Photometrics vary based on lens and CCT; see chart on page 11 for data specific to your fixture.

5SLW - _________ - ________ - _________ - _________ - __________ - ____________ - _________ CCT

LED

Finish

Lens Options

1018

173 lm/ft, 2.7 w/ft, 87 CRI

24 2400°K *

AL Silver

27 2700°K

OP1 Opal 1, Frosted

2545

366 lm/ft, 5.5w/ft, 87 CRI

BL Black

30 3000°K

BR Bronze

OP2 Opal 2, Medium

3545

443 lm/ft, 5.5w/ft, 92+ CRI

40 4000°K

4545

516 lm/ft, 5.5w/ft, 85 CRI

35 3500°K

PG 94° Acrylic

WH White

OP3 Opal 3, Heavy

C Custom

Wire Exit WE1 1’ w/ connector WE1R 4’ Bare End

Factory Installed Options RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length Use Code from Chart of Standard Lengths below, or specify Custom Length as follows: C (12.25") [C (311 mm] Max. Length: 72”

45 4500°K * 2545 LEDs only

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions. Code

Fixture Lengths

1018

2545 / 3545 / 4545

4

5 .12” [130mm]

0 .90w

1.83w

8

9 .06” [230mm]

1 .79w

3.66w

12

13 .00” [330mm]

2 .69w

5.50w

16

16 .93” [430mm]

3 .58w

7.32w

20

20 .87” [530mm]

4 .48w

9.15w

24

24 .80” [630mm]

5 .38w

11.0w

28

28 .74” [730mm]

6 .27w

12.8w

32

32 .68” [830mm]

7 .17w

14.6w

36

36 .61” [930mm]

8 .07w

16.5w

40

40 .55” [1030mm]

8 .96w

18.3w

44

44 .49” [1130mm]

9 .06w

20.1w

48

48 .43” [1230mm]

10 .7w

22.0w

52

52 .36” [1330mm]

11 .6w

23.8w

56

56 .30” [1430mm]

12 .5w

25.6w

60

60 .24” [1530mm]

13 .4w

27.5w

64

64 .17” [1630mm]

14 .3w

29.3w

68

68 .11” [1730mm]

15 .2w

31.2w

72

72 .05” [1830mm]

16 .1w

33.0w

Any of the fixture lengths listed at left is considered a “standard” length fixture. If your application requires a fixture length that differs from the lengths shown, it would be considered a “custom” length. “Custom” length fixtures have an overall finished length (including end caps) that is exactly as specified; because the LED boards are limited to 4” increments, the LED board that is the next size down from the length specifed would be centered inside the custom length fixture. Because LEDs have a generous field angle, it is not necessary for a fixture to extend the full length of the application area for it to be fully lit. Custom fixture lengths are most often used where the fixture is visible and an exact-length fixture is desired for aesthetic reasons.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 41


Visual Lighting Technologies

EssentialLEDs

CAT. NO.

SPECIFICATIONS

0.60 “ [15.29mm]

FIXED CLIP

Cut Sheet #9X102

Dimensions: 1.095” [27.81mm] x 0.210” [5.33mm] Material: 301 Stainless Steel

ELL -AC - 5SLW-MC

Description:

Fixed Metal Clip for mounting 5SLW square extrusion. Screws to mounting surface with screw, provided. Fixture extrusion snaps into clip. Allow 1 per 20” of extrusion (min. 2 per fixture).

0.88” [22.28mm]

page 42

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X112

Wet Location Constant Voltage Wiring Accessories Connectors Fixtures come with 12” [0.304m] of 18 AWG wire and male TE Slim Seal connector as standard; customization available; connector can be removed for hard wired installation. Starter, splitter and interconnect wiring accessories available for easy installation; see page below.

Female

Male

1.390” L x 0.567” W x 0.237”H [35.30mm x 14.4mm x 6.02mm]

0.984” L x 0.567” W x 0.237”H [25mm x 14.4mm x 6.02mm]

Starter Cables have bare wires on one end to connect directly to LED driver terminals or to wires via wire nuts, and one (1) female connector for connection to a linear fixture, splitter accessory, or interconnect wire. Splitters connect multiple fixtures to a single driver; 2- way, 4-way or 8-way options; one (1) male connector, multiple female connectors. Interconnect Wires extend wiring between driver and fixture or between splitter accessory and fixture; (1) one female connector, (1) one male connector. All Wiring Accessories are ETL Listed (UL 2108), when used as part of an EssentialLEDs system. 2 FT or 8 FT STARTER CABLE

CAT. NO.

SPECIFICATIONS

ELL - AC - CVW - SC 2 8

Description: Bare wires and female connector. Bare wires connect to LED driver terminals or to wires via wire nuts; female connector connects directly to fixture, splitter or interconnect wire. 2’ or 8’ lengths, 18 AWG wire.

2 or 4 - WAY SPLITTER

SPECIFICATIONS

CAT. NO. ELL - AC - CVW - SPL 2 4

x2 x4 8.00” (203.20mm)

INTERCONNECT WIRES

Description: One male connector with multiple female connectors. Allows 2, 4 or 8 fixtures to connect to a single driver; male connector connects to starter cable; female connectors connect to fixtures or interconnect wires. Overall length 8”; Each female connector 3” long. 18 AWG wire.

SPECIFICATIONS

CAT. NO. ELL - AC - CVW - ICW -

Description: One male and one female connector for extending connection between driver and fixture or between driver and splitter accessory. 2’, 4’, 5’ and 10’ lengths, 18 AWG wire.

2 4 5 10

page 43

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W172

LightRun Fundamentals All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1084 LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

1084/350mA Driver

1084/500mA Driver

1084/ 700mA Driver

APPLIED LED

Nichia 157

Nichia 157

Nichia 157

LUMEN OUTPUT

200 lm/ft [656 lm/m]

283 lm/ft [928 lm/m]

385 lm/ft [1263 lm/m]

LED WATTAGE

.10w

.10w

.10w

LED EFFICACY

108 lm/w

108 lm/w

108 lm/w

POWER CONSUMPTION

3.0w/ft. [9.84w/m]

4.4 w/ft. [14.4w/m]

6.6w/ft [21.6w/m]

67 lm/w

64 lm/w

58 lm/w

not including driver losses

FIXTURE EFFICACY

not including driver losses

LightRun features a proprietary 1084 LED board and unique diffuse lens. LightRun creates a single linear light source that eliminates individual diode reflections and beautifully illuminates the details of designer handbags, small leather goods and other types of highly detailed merchandise.

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

ELECTRICAL

LENGTHS FINISH LENSING

All photometrics based on 3500K CCT

Diffuse lens

Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes on request

Up to 58.66” [1490mm]; see Length & Wattage Table (page 45) for all standard length options

LightRun uses dimmable .10w LEDs in five color temperatures. It is available in 3.858” [98.00mm] increments up to a length of 58.66” [1490mm].

Driver Type: Constant Current, 350mA, 500mA or 700mA, Class 2 UL Recognized Input Voltage: 4v - 40v Dimming: 0-10 v DMX Trailing Edge (see Driver Cut Sheet) Feed Wire: 96” [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 95° F [-30° to 35° C]

Visit the VLT website for application photos and most recent IES files.

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

MADE in USA Fixed or Adjustable Mounting Clips

(UL 2108 & 962);

RoHS Compliant (if specified); LM79, LM80 ; Title 24 Pending, CCC Pending, IP20

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

CCT Light Output Conversion

page 44

The EssentialLEDs LightRun fixture was developed for use in retail display applications where the bright reflection of individual LED diodes can be an unwelcome visual distraction.

2700K

3000K

3500K

4000K

4500K

0.88

1.0

1.0

1.08

1.08

LightRun’s proprietary LED board places the LEDs right next to each other, for a continuous run of light.

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W172 LightRun - Lensed

0.531" [13.4mm]

IP20 | Medium square extrusion with specialized LED board and diffuse lens for linear lighting in Display applications. Dry location. Includes one row of .10w Nichia 157 LEDs (274 lm/ft @700mA, 3.42 w/ft, 87 CRI). Standard color temperatures of 2700K, 3000K, 3500K, 4000K, 4500K. All LEDs include ±60K Micro Binning. Available in Silver or Black Anodized, Bronze or White Powder Coated, or Custom Finishes. Mounting options below. Weight per foot 0.1545 lb/ft [0.2299 kg/m].

0.633" [16.07mm]

ELL- LR - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED 1084

.10w

CCT

Finish

Lens Options

27 2700°K

AL Silver Anodized

DL Diffuse Lens

30 3000°K

BL Black Anodized

35 3500°K

BR Bronze

40 4000°K

RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

Fixture Length Use Code from Chart of Standard Lengths below, or specify Custom Length* as follows: C (12.25”) [C (311 mm] Max. Length: 60” (*For Custom Lengths, factory will center closest length LED Board on specified length extrusion)

WH White

45 4500°K

Factory Installed Options

Wire Exit WE1 Default

C Custom

Extrusion Length & Wattage Table Use Code numbers to specify Standard Length extrusions. Code

Fixture Lengths

350mA Driver ¹

Beam Angle

500mA Driver ²

700mA Driver ¹

8

8 .50” [216mm]

2. 1

3.0

4.6

12

12 .36” [314mm]

3. 0

4.4

6.6

16

16 .22” [412mm]

4. 0

5.8

8.7

20

20 .07” [510mm]

4. 7

7.1

10.4

24

23 .94” [608mm]

5. 6

8.3

12.1

28

27 .79” [706mm]

6. 8

10.0

14.5

32

31 .65” [804mm]

7. 7

11.4

16.5

36

35 .51” [902mm]

8. 7

12.8

18.5

40

39 .37” [1000mm]

9. 7

14.2

20.5

44

43 .22” [1098mm]

10. 7

15.7

22.4

48

47 .08” [1196mm]

12. 0

17.5

24.9

116°

For longer fixtures, two LightRun LED Boards can be contained within a single longer extrusion; boards will be wired separately at opposite ends of the extrusion.

Fixture Accessories ELL - AC - LR - MC

ELL - AC - LR - AMC

ELL - AC - S123 - AB

page 45 Fixed Metal Clip. Extrusion snaps into clip. Can be used in conjunction with Adjustable Bracket.

Adjustable Metal Clip with offset screw attachment for flush mount; bends to desired angle.

Metal Hinged Bracket for use in conjunction with fixed metal clip; allows 30° adjustability, repeated adjustments, and simplifies angled adjustments in hard-to-reach areas.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W182

Elegance2 Fundamentals

The EssentialLEDs Elegance2 fixture was developed specifically to provide exceptional lighting flexibility in retail display applications. Its high light output, low energy use and long lamp life make Elegance² an ideal fixture for fully illuminating small displays, or adding focused highlights to larger casework. The compact and adjustable head has a tilt range of +/- 65° to accomodate changing display needs.

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 4219C LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

4219C/350mA Driver APPLIED LED

Nichia 219C

LED WATTAGE

1.0 w

CCT OPTIONS

2700K, 3000K, 3500K, 4000K & 4500K

CRI

87

FIXTURE WATTAGE

4.25w

LUMEN OUTPUT

290 min.

FIXTURE EFFICACY* not including driver losses

TBD

LUMINAIRE EFFICACY*

TBD

LED EFFICACY*

94 lm/w

Elegance² offers 15°, 30°, 60° and 30° x 60° lensing options; 30° x 60° option creates an oval light distribution that is ideal for illuminating elongated merchandise like handbags and jewelry. Elegance² heads can be stem-mounted for freestanding installation, or attached directly to the case structure in surface-mount or recessed-mount configurations.

page 46

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

ELECTRICAL

DIMENSIONS FINISH LENSING

All photometrics based on 3500K CCT TBD: Not all new fixture data available at time of printing. Please check website for complete information.

15°, 30°, 60° and 30° x 60°

Silver, Black, Custom finishes on request

1.49" x 1.74" x 0.41" [37.84mm x 44.19mm x 10.41mm]

Driver Type: Constant Current, 350mA, Class 2 UL Recognized Input Voltage: 4v - 12.0v Dimming: 0-10 v Trailing Edge (see Driver Cut Sheet) Feed Wire: 96” [2.44m] of 22 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 104° F [-30° to 40° C]

Elegance² fixtures are dimmable and available in five color temperatures, with a CRI of 87. LED component can be replaced in field by trained technician.

50,000 HR lifetime (Ta= -25°C to 35°C; Tc max 75°C); 5 year limited warranty

Visit the VLT website for application photos and most recent IES files.

MADE in USA

Multiple options including stems, bushings, surface mount and free standing

(2108, 8750, 962);

(2108, 8750) ;

RoHS Compliant (if specified); LM79, LM80 ; Title 24 Pending, CCC Pending, IP20

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

CCT Light Output Conversion

2700K

3000K

3500K

4000K

4500K

.88

1.0

1.0

1.08

1.08

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W182

Beam Angle (lens)

Beam Angle (lens)

Beam Angle (lens)

15°

30°

60°

Head Tilts Forward and Back

65°

2

Elegance

IP20 | Compact square fixture featuring specialized LED board and lensing for display applications. Four Nichia 219C LEDs in 2700K, 3000K, 3500K, 4000K or 4500K; CRI 87; Micro Binning ±60°; 4 watts per fixture. Fixture head tilts +/- 65°, with 15°, 30° , 60° or 30° x 60° lens options. Anodized Silver, Black or Custom finish. Multiple mounting options available.

65°

Variable; see mounting details below

ELL- EG2 - _________ - _________ - _________ - _________ - __________ - __________

4.0w

CCT

Finish

Lens Options

27 2700°K

AL Silver

15 15° Lens

30 3000°K

BL Black

35 3500°K

RoHS Compliant**

30 30° Lens

ST1

Stem Mount, 0.472” [12mm]

60 60° Lens

ST2

Stem Mount, 1.00” [25.4mm]

3060 30° x 60°

BU

Bushing Mount

SU

Surface Mount

45 4500°K **See page 25 for list of countries with RoHS or similar restrictions.

Mounting Options

Bushing Mount

1.74 in [44.1mm]

1.74 in [44.1mm]

8mm Free Stand Mount 6” [152.4mm]

FS12

8mm Free Stand Mount 12” [304.8mm]

FS18

8mm Free Stand Mount 18” [457.2mm]

Free Stand Mount 1.49 in [38mm]

1.49 in [38mm]

1.49 in [38mm]

1.49 in [38mm]

1.25 in [38.1mm] Max

ST1: Max 0.25”[6.35mm] ST2: Max 0.75” [19.05mm]

Surface Mount

FS6

1.74 in [44.1mm]

Stem Mount

Factory Installed Options RO

C Custom

40 4000°K

Wire Exit WE1 Default

1.74 in [44.1mm]

LED 4219C

Adjustable Stem Height

1.00 in [25.4mm]

1 inch to 18 inches [25.4mm to 457.2mm]

Stem Mount provides most minimal mounting option; stem attaches with nut on rear side of mounting surface; no rotation0. Choose ST1 or ST2 based on the thickness of mounting surface. Max thickness for ST1: 0.25” [6.35mm] Max thickness for ST2: 0.75”[19.05mm]

Bushing Mount provides the finished look of a ferrule at fixture base, allows 360° rotation of fixture head; position can be fixed with set screw. Bushing is attached with nut on rear side of mounting surface. Maximum mounting surface thickness 1.25” [38.1mm].

Surface Mount option allows installation of fixture with screws to top surface, no rear access necessary. Surface Mount allows 360° rotation of fixture head; postion can be fixed with set screw.

Free Stand Mount available in three stem height options; further height adjustment possible via set screw in fixture base. Free Stand Mount allows fixture installation with screws on top surface or with nut on rear side (no more than 1” mounting surface thickness recommended.) Top surface mount allow 360° rotation after installation; nut on rear side does not.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 47


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W192

Orb Fundamentals

The EssentialLEDs Orb fixture was

All LEDs binned to an overall CCT tolerance of ±124°K; per project CCT tolerance of ±60°. 1219C LED Board available in 2700K, 3000K, 3500K, 4000K & 4500K.

1219C/350mA Driver

1219C/500mA Driver

1219C/ 700mA Driver

APPLIED LED

Nichia 219C

Nichia 219C

Nichia 219C

LED WATTAGE

1.0w

1.5w

2.0w

CCT OPTIONS

2700K, 3000K, 3500K, 4000K & 4500K

2700K, 3000K, 3500K, 4000K & 4500K

2700K, 3000K, 3500K, 4000K & 4500K

87

87

87

1.25w

1.9w

2.84w

LUMEN OUTPUT

TBD

TBD

TBD

FIXTURE EFFICACY*

TBD

TBD

TBD

94 lm/w

94 lm/w

94 lm/w

CRI FIXTURE WATTAGE

not including driver losses

LED EFFICACY*

The Orb housing tucks neatly into top, bottom, or side corners of display windows, niches or millwork. Rotatable heads are available in 14° or 29° lens options. Orb’s high light output, low energy use and long lamp life make it an ideal fixture for fully illuminating displays of jewelry, handbags and other types of highly detailed merchandise.

LENSING FINISH

Driver Type: Constant Current 350mA, 500mA or 700mA, Class 2 UL Recognized Input Voltage: 3v - 6v Dimming: 0-10 v Feed Wire: 96” [2.44m] of 20 AWG Wire [1.02mm2], Male Connector Operating Ambient Temperature: -22° to 95° F [-30° to 40° C]

LISTINGS LIFE & MOUNTING & TESTS WARRANTY

Silver, Black & Custom Finishes on request

ELECTRICAL

All photometrics based on 3500K CCT TBD: Not all new fixture data available at time of printing. Please check website for complete information.

14° Lens or 29° Lens

Orb fixtures are dimmable and available in five color temperatures, with a CRI of 87. LED component can be replaced in field by trained technician. Visit the VLT website for application photos and most recent IES files.

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty

Mounting plate provided

MADE in USA (2108, 8750, 962);

(2108, 8750) ;

RoHS Compliant (if specified); LM79, LM80 ; Title 24 Pending, CCC Pending, IP20

The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

CCT

page 48

developed specifically for use in retail display applications. Rotatable heads are seated into self-mounting angled housing and lock securely in desired position. Custom configurations allow up to 6 rotatable heads in fixture lengths up to 4 feet.

Light Output Conversion

2700K

3000K

3500K

4000K

4500K

.88

1.0

1.0

1.08

1.08

from

L D VLTLE

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W192

1.71" [43.4mm]

2.

12

"[

53

.7 4m m ]

1.34" [34.04mm]

1.71" [43.4mm]

7.94" [201.68mm] (Variable)

Orb IP20 | Display lighting fixture featuring 90° angled mounting housing combined with 1 to 6 rotatable spherical LED lighting heads. Heads available with 14° or 29° lens options; heads lock securely in desired position. Fixture length variable according to number of heads specified to maximum of 4 feet. Wattage variable according to driver voltage. Available in 2700K, 3000K, 3500K, 4000K or 4500K; CRI 87; Micro Binning ± 60°K; Silver, Black or Custom anodized finish.

ELL- OR - _________ - _________ - _________ - _________ - __________ - ______/______ - _____________ LED 1219C

CCT 2.0w

Finish

Lens Options

27 2700°K

AL Silver

14 14° Lens

30 3000°K

BL Black

29 29° Lens

35 3500°K

C Custom

Wire Exit WE1 Default

40 4000°K

Number of Heads

45 4500°K

1 1 Head, Specify Length of Fixture

Factory Installed Options* RO

RoHS Compliant**

**See page 25 for list of countries with RoHS or similar restrictions.

2 2 Heads, Specify Length of Fixture 4 4 Heads, Specify Length of Fixture 6 6 Heads, Specify Length of Fixture

Beam Angle (lens)

Beam Angle (lens)

14°

29°

page 49 Orb tucks into corners of display niches and windows Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X122

Constant Current Wiring Accessories Connectors Fixtures come with 96” [2.44m] of 20 AWG wire and male JST Slim Seal connector as standard; customization available; connector can be removed for hard wired installation. Starter, splitter and interconnect wiring accessories for easy installation below.

Female

Male

0.75” L x 0.26” W x 0.16”H [19.0mm x 6.7mm x 4.0mm]

0.51” L x 0.25” W x 0.13”H [13mm x 6.3mm x 3.2mm]

Starter Cables have bare wires on one end to connect directly to LED driver terminals or to wires via wire nuts, and one (1) female connector for connection to a linear fixture, splitter accessory, or interconnect wire. Splitters connect multiple fixtures to a single driver; 2- way, 4-way or 8-way options; one (1) male connector, multiple female connectors. Interconnect Wires extend wiring between driver and fixture or between splitter accessory and fixture; (1) one female connector, (1) one male connector. All Wiring Accessories are ETL Listed (UL 2108), when used as part of an EssentialLEDs system. 2 FT or 8 FT STARTER CABLE

CAT. NO.

SPECIFICATIONS

ELL - AC - CC - SC 2 8

Description: Bare wires and female connector. Bare wires connect to LED driver terminals or to wires via wire nuts; female connector connects directly to fixture, splitter or interconnect wire. 2’ or 8’ lengths, 20 AWG wire.

2, 4 or 8- WAY SPLITTER

8.00” (203.20mm)

INTERCONNECT WIRES

SPECIFICATIONS

x2 x4 x-8

CAT. NO. ELL - AC - CC - SPL 2 4 8

Description: One male connector with multiple female connectors. Allows 2, or 4 fixtures to connect to a single driver; male connector connects to starter cable; female connectors connect to fixtures or interconnect wires. Overall length 8”; Each female connector 3” long. 20 AWG wire.

SPECIFICATIONS

CAT. NO. ELL - AC - CC - ICW -

Description: One male and one female connector for extending connection between driver and fixture or between driver and splitter accessory. . 2’, 4’, 5’ and 10’ lengths, 20 AWG wire.

page 50

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

2 4 5 10


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X132

light panel

All photos: ELP-L EiKO Lighting, Ltd. Headquarters, Shawnee, KS Lighting Design by Bruce Yarnell, LC, Yarnell Associates

page 51

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X132

About Light Panel EssentialLEDs Light Panel is a highly customizable lighting product that consists of LED modules placed on a lightweight expanded PVC substrate. EssentialLEDs Light Panel is ideal for backlighting materials like Acrylic Panels, Frosted Glass, Onyx or Stretched Fabric. EssentialLEDs Light Panel is dimmable and available in up to six color temperatures ranging from 2400K through 4500K, and has a CRI of 87. EssentialLEDs Light Panel is available in two distinct versions: Integrated White Rigid PVC Substrate

White Rigid PVC Substrate

Pre-drilled Mounting Holes 1 per 16” OC (standard))

5/8"

Pre-drilled Mounting Holes

5/8"

5/8"

ELP-G

ELP-L is the most popular version of EssentialLEDs Light Panel because of its versatility in customization and lower cost. It is available with .25w LEDs in three spacing options, and is a great choice for backlighting materials like acrylic or onyx. As an option, ELP‐L can be made with LEDs in two different color temperatures, each with individual control allowing for variable color temperature mixing. ELP‐L can also be used as a general lighting source when combined with T‐Bar or suspension hardware, or as the light source in custom-designed fixtures.

ELP‐G is a “specialty” version of EssentialLEDs Light Panel, designed specifically for backlighting stretched fabric ceiling installations. With LEDs at a fixed 1” x 1” spacing, ELP-G has four times more LEDs than ELP‐L, yet because of its onboard regulated power supply, is able to run at half the wattage. And while the wattage is substantially lower, the light output is virtually equal. ELP‐G delivers a backlit ceiling with zero lamp imaging hot spots in a mere five inches of throw distance. ELP-G can be purchased in custom sizes or in individual modules.

page 52

From the beginning, Visual Lighting Technologies has been proud to use LEDs from the Nichia Corporation as our applied LED. As one of the world’s leading LED manufacturers, Nichia has leveraged its vast experience with phosphors to create beautiful white light LEDs in a full range of color temperatures. You can learn all about our very selective LED binning process by reading “Binning and Chromaticity” on page 7.

NT OU I

NG

About the LEDs

M

ELP-L

H OLE Both Panel Types Ship with Stickers That Clearly Mark Mounting Holes

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X132

Backlighting Stretched Fabric Ceilings Stylish and versatile stretched fabric ceilings - such as those manufactured by Barrisol and Newmat - are popular for a wide range of commercial, retail, hospitality and residential applications. EssentialLEDs 1” x 1” ELP-G Light Panel is a specialized backlighting product that was designed and engineered specifically to provide a superior result when backlighting these stretched fabric ceilings. Incorporation of a regulated on-board power supply on each individual ELP-G Panel allows the product to achieve the very high efficiency level of 96 lumens per watt (596 lumens per square foot*). The result is bright and even backlighting without the unattractive lamp imaging that often occurs with fluorescent light sources. (*Includes driver losses) ELP-G offers distinct advantages over fluorescent lamp backlighting: • Cavity Depth: ELP-G requires only 5” of separation between the LED panel and the stretched fabric to attain perfect diffusion, in contrast to the 12” - 16” needed with fluorescent lamps. So even where plenum spaces are very limited, low profile ELP-G modules will provide completely diffuse light with zero lamp imaging. • Ease of Installation: ELP-G panels screw directly to the installation surface using pre-drilled through-holes, and the range of ELP-G module sizes makes it possible to fully cover the ceiling surface - evenly and all the way to the edges - resulting in backlighting without dark spots or edges. • Maintenance: On average, LEDs are rated to last three to four times longer than standard T8 fluorescent lamps (50,000 hours vs 15,000 hours), a difference that becomes even more significant when dealing with the complexities of a stretched fabric ceiling. When relamping is done, stretched fabric panels MUST be removed and re-installed by the manufacturer - a factor that lengthens the task, complicates scheduling, and adds significantly to the cost of lamp maintenance. And when you add the environmental issues of spent fluorescent lamps - the glass and mercury content and cost of safe (and legal) disposal, the longer lifespan of the LED alternative is even more attractive. • Quality of Light: The small, .10w LEDs used in ELP-G provide excellent lumen output (596 lm/sq.ft., based on 3500K), with a full range of color temperatures and high CRI (87). Whether you’re lighting a warm residential interior or cool commercial spaces, ELP10 will provide the perfect CCT. And the small light points, with their 116° beam angles, provide an exceptionally even backlight. • Light Quality Over Time: Long before those fluorescent lamps have quit, they have color-shifted in different - and irregular - directions. Loss of mercury inside the lamp causes a shift to pink, often accompanied by black burns on the lamp ends and flickering. These issues are magnified by a stretched fabric application, where such irregularities are highly visible. In contrast, ELP-G delivers even lighting in very specific color temperatures that will remain constant over the much longer life of the product. Even as the product nears the end of its projected 50,000hr lifespan, color temperature shift will be minimal. The 1” x 1” spacing of .10w LEDs provides exceptionally even backlighting.

Notes about dimming ELP-G: In LED applications where security cameras are in operation (retail stores, office buildings, hospitality, etc.), use of Osram 0 -10v OTDIM units will result in flickering of video images. For these applications, Class 1 or Class 2 Mean Well HLG Series dimming drivers (pages 66, 67 & 68) must be specified; these drivers have been tested and will not produce video flickering. Where dimming is not required, any electronic driver can be used. ELP-G CANNOT be driven using magnetic drivers!

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 53


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X132

Light Panel Photometrics ELP-L

2’ x 2’ panel 1113

835

557 3 278

2

1

Pictured: 6 LED x 6 LED grid (2’ x 2’ panel) = 36 .25w LEDs

Throw Distance

Average Foot Candles

1 ft.

1113

2 ft.

278

3 ft.

124

4 ft.

70

Maximum Candela = 1113 Located At Horizontal Angle = 0, Vertical Angle = 0 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) : BLUE # 2 - Vertical Plane Through Horizontal Angles (45 - 225) : MAGENTA # 3 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) : RED

Throw Distances ELP-L

ELP-G

Lit Surface (acylic, onyx, etc.) 2.0” [50.8mm]* Lit Surface (stretched fabric) Light from ELP-G is evenly blended at 1” [2.54mm] BUT with highly transluscent materials like Barrisol, hot spots require 5” [127mm] to fully disappear. 5.0” [127mm]*

When backlighting materials like acrylic and onyx, ELP-L is a great choice. Standard ELP-L includes an integrated diffusor and requires only 2” of cavity space for the LED diode light points to fully blend. Where cavity space is less than 2”, use of a secondary diffusor (i.e. opal acrylic) may enable full diffusion in less than 2”. When backlighting materials like 3form, stained or frosted glass, use of a secondary diffusor (i.e. opal acrylic) will allow even backlighting without visible hot spots. A mock-up using proposed page 54 materials is always recommended.

Due to the highly transluscent nature of materials like Barrisol and Newmat stretched fabric ceilings, full diffusion of the backlighting source becomes more difficult. ELP-G, with its 1”x1” LED spacing and exposed LED board construction, can provide full diffusion without “hot spots” in just 5” of cavity space (as compared to a range of 12” to 16” with fluorescent lamps). See page 53 for more information regarding stretched fabric ceilings. Where cavity space is extremely limited, materials like acrylic and onyx can also be evenly backlit with ELP-G in just 1” of cavity space. *Dimension appropriate for most applications. Mockup recommended to determine optimum distance

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X132

Light Panel LED Module Options LED module options for ELP-L and ELP-G differ; the team at VLT will help you choose the best product and the best layout for your application. ELP-L LEDs:

ELP-G LEDs:

Available in 2-, 3- or 6- LED modules. Spacing of LEDs is fixed at 2” OC [50.8mm]; spacing of modules on Light Panel is variable. 2” x 2” spacing = 11w/sq. ft.

Available in 6 module sizes with fixed 1” x 1” [25.4mm x 25.4mm] LED spacing. (Recommended for backlighting stretched fabric ceiling treatments) 1” x 1” spacing = 5.5w/sq. ft.

3 LED Module

2 LED Module

6 LED Module

2” [50.4mm]

ELP-L is available in three standard spacing options: 2” x 2”, 2” x 3” or 2” x 4”. Spacing for your project should be based on desired lumen output and cavity space available.

2” [50.4mm] 3” [76.2mm]

4” [100.8mm]

ELP-L can be made using LED modules in two different color temperatures with separate controls - an option that allows variable color temperatures from the same light panel. For example, variable-temp ELP-L can provide a “daylight” effect during the day that can be warmed at night - a great option for restaurant applications.

-

-

-

-

-

-

-

-

-

-

-

-

Module Sizes: 12” x 12”, 12” x 6”, 12” x 3”, 6” x 6”, 6” x 3”, 3” x 3”

-

-

-

-

-

-

-

-

-

-

-

-

Though standard ELP-G modules are rectilinear, angled and round shapes can also be evenly backlit. (variable CCT mixing)

*Drawings not to scale

Panel Shape & Size Options LED Light Panel shapes are not limited to squares and rectangles. Shapes such as the ones pictured below are easy to make. Provide a dimensioned sketch of the shape you need and VLT will determine the optimum module placement to provide the most even results. Shapes can be any size within the 60” x 120” [1524mm x 3048mm] maximum. Order sizes carefully - panels cannot be trimmed in the field.

Sink

page 55 LED Boards arranged in custom configuration for even lighting of custom shape

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

| LED Basics |

EssentialLEDs

Cut Sheet #9W202

ELP-L Light Panel Specifications LED Board

Power Consumption

Lumen Output

LED Efficacy

CRI

2531

11.0 w/sq. ft

584 lm/sq. ft.

108 lm/w

2515

5.5 w/sq. ft

300 lm/sq. ft.

108 lm/w

[118.0w/sq. m]

[6283 lm/sq. m]

[59.0w/sq. m] [3229 lm/sq. m] Based on 3500K Color Temperature

| Efficacy |

Optical

CCT

2400K

Lumen Output*

Mechanical | Electrical | Listings | Life & | Warranty

Per Project Binning

87

± 124°K

Micro ± 60°K

87

± 124°K

Micro ± 60°K

3000K

3500K

2057 lm 2057 lm 2338 lm

(2’ x 2’ Panel, .25w LED*) [1m x 1m Panel, .25w LED]

[5533lm]

[5533lm]

.88

.88

[6289lm]

4000K

4500K

2338 lm 2525 lm 2525 lm [6289lm]

[6792lm]

[6792lm]

1.0

1.08

1.08

*Based on 2531 LED Board Only; Consult Factory for 2515 Data.

Light Output Conversion

1.0

Beam Angle/Field Angle

90° Beam Angle /120° Field Angle

CRI

87

CCT Tolerance

± 60K

(On per project basis; see pages 2 & 3)

Based on 3500K LED

LED Efficacy Fixture Efficacy

108 lm/w (2531 LED)

53 lm/w

Luminaire Efficacy (2531 LED)

48 lm/w

Size Options

Min: 2” x 4” ,

[50.8mm x 101.6mm] ,

LED Spacing

page 56

2700K

ELP-L Light Panel

CCT Tolerance All 6 Bins

Standard - 2” x 2”

Max: 60” x 120”

[1524mm x 3048mm]

[50.8mm x 50.8mm]; (Variable Between Rows)

Panel Thickness

5/8” Standard [15.9mm], 3/8” Compact [9.5mm]

Material

Expanded PVC - White or Custom Colors with Clear Acrylic Protective Cover

Operating Ambient Temperature

-22° to 104° F

Weight

3.25 lbs./sq. ft. [15.9 k/sq. m]

Mounting

Through Bolt in Pre-drilled Holes, T-Bar, Aircraft Cable

Diffusion

Integrated Polycarbonate Layer, Optional Stand-off Diffusor

Driver Type

Constant Voltage

Input Voltage

24V DC

Applied LED

Nichia 157

Power Consumption

2531 LED 11.0w/sq. ft. [118.0w/sq. m]

Dimming

0 -10 volt with Electronic Driver

Max Wattage per Tail

96w (approx. 36” x 36”, or 324 LEDs) [approx. 914mm x 914mm]

Feed Wire

96” [2.44m] of Non Plenum-Rated, 18 AWG Wire [1.29mm2] No Connector; Plenum-Rated Wiring Optional

(UL 2108, 8750 & 962); IP54 (Dry/Damp)

[-30° to 40° C ] (Standard Thickness)

ELP-L Light Panel is the ideal product for use in backlit applications of materials such as: • Acrylic • Frosted Glass • Onyx ELP-L can be fabricated in all shapes and sizes and for a variety of lumen outputs and cavity depths. It is dimmable and available in six color temperatures (2400K , 2700K, 3000K, 3500K , 4000K or 4500K) with a CRI of 87. New! ELP-L Light Panel is now available in two wattage options: the standard 11 watts per square foot, and a new energy-saving version at just 5.5 watts per square foot. Both ELP versions are also available in a variable-temp version that uses two CCTs and allows color temperature adjustment through separate controls. Visit the VLT website for application photos & most recent IES files, LM79 & LM80 reports.

|

2515 LED 5.5w/sq. ft. [59.0w/sq. m]

; RoHS Compliant (if specified); LM79, LM80; Title 24 Pending; CCC Pending

MADE in USA

from

L D VLTLE

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W202

ELP-L Light Panel Configurator As standard, .25w LEDs are arranged in an even 2” grid of rows and columns, with one pre-drilled mounting hole per 16” [406.4mm] OC. Standard finished thickness is 5/8” [15.9mm]. To order standard shapes (squares, rectangles) and standard LED placements, use the configurator below. Use choices on the Options & Accessories pages to complete your standard product. Custom Configurations: for custom shapes, custom LED placements, or custom mounting hole placements, please contact the VLT factory. Variable color temperature mixing can be achieved using 2” x 1” (E) LED spacing and specifying 2 CCT’S . Each CCT will have its own wire tail which can be dimmed separately. Note: Choice of Clear Front Lens increases lumen output by 4.5% and reduces field angle from 120° to 110°; consult factory before specifying.

ELP - L - _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT*

Panel Height (in.)

Panel Width (in.)

584 lm/sq. ft. 2531 11.0 w/sq. ft 87 CRI

24 2400°K

Up to 120” [1524mm]

Up to 60” [3048mm]

300 lm/sq. ft. 2515 5.5 w/sq.ft. 87 CRI

*Based on Standard (A) LED Spacing

Options & Accessories CP

3/8” [9.5mm] Compact Substrate* (instead of standard 5/8” [15.9mm]

27 2700°K WE_

30 3000°K 35 3500°K

Wire Length (ft.)

40 4000°K

96’’ [2.44m] Standard (Option up to 30’ [9.14m])

45 4500°K

*Specify 2 CCT’s with “E” LED spacing ex. 27/40

2” x 2” [50.8mm x 50.8mm] (Standard)

B

2” x 3” [50.8mm x 76.2mm]

C

2” x 4” [50.8mm x 101.6mm]

E

2” x 1” [50.8mm x 25.4mm] (Specify 2 CCTS)

Plenum-Rated Wiring

DF

Diffuser Panel

CL

Clear Front Lens

SC

Substrate Color

SO

Stand-offs (for mounting of both Light Panel and diffuser panel)

LED Spacing A

Wire Exit Location (WE2 standard)

PR

SG

Suspension Grips (hardware for suspended applications)

AF

Aluminum Framing (adds rigidity for larger panels)

RO

RoHS Compliant**

*Only available for wall-mounted applications with sizes less than 24”x24” [609.6mm x 609.6mm] **See page 25 for list of countries with RoHS or similar restrictions.

2531 LED Only; Consult Factory for 2515 Data

Spacing

Lumens/sq. ft

Lumens/sq. meter

Power Consumption

A

2’” x 2” [50.8mm x 50.8mm]

585 lm

6294 lm

11.0 w/sq. ft.

B

2” x 3” [50.8mm x 76.2mm]

390 lm

4198 lm

7.33 w/sq. ft.

C

2” x 4” [50.8mm x 101.6mm]

293 lm

3147 lm

5.5 w/sq. ft.

E

2” x 1” [50.8mm x 25.4mm]

1170 lm

12588 lm

22.0 w/sq. ft.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 57


Visual Lighting Technologies

| LED Basics |

EssentialLEDs

Cut Sheet #9W212

ELP-G Light Panel Specifications LED Board

Power Consumption

Lumen Output

LED Efficacy

CRI

1006

5.5 w/sq. ft

596 lm/sq. ft.2

130 lm/w

87

[.60w/sq. m]

[6283 lm/sq. m]

Optical | Efficacy | Mechanical | Electrical

± 124°K

Micro ± 60°K

Includes driver losses

2

2700K

Lumen Output

3000K

3500K

1943 lm 2207 lm

(2’ x 2’ Panel, .25w LED*) [1m x 1m Panel, .25w LED]

[5225lm]

[5937lm]

.81

.93

Light Output Conversion

4000K

4500K

2207 lm 2384 lm 2384 lm [5937lm]

[6412lm]

[6412lm]

.93

1.0

1.0

Beam Angle/Field Angle

116° Beam Angle /140° Field Angle

CRI

87

CCT Tolerance

± 60K

(On per project basis; see pages 2 & 3)

Based on 4000K LED

LED Efficacy

130 lm/w

Fixture Efficacy

108 lm/w

Luminaire Efficacy

96 lm/w

Size Options

Min: 3” x 3” ,

Max: 60” x 120”

[46.2mm x 76.2mm] , [1524mm x 3048mm]

LED Spacing

Life & | Warranty | Listings |

Per Project Binning

Based on 4000K Color Temperature

CCT

page 58

CCT Tolerance All 6 Bins

Panel Thickness

1” x 1” [25.4mm x 25.4mm] 5/8” Standard [15.9mm]

Material

Expanded PVC - White with Clear Removable Lexan Protective Cover

Operating Ambient Temperature

-22° to 104° F

Weight

2.66 lbs/sq. ft [13 kg/sq. m] with removable cover 1.96 lbs/sq. ft [9.6 kg/sq. m] without

Mounting

Through Bolt in Pre-drilled Holes

Diffusion

None

Driver Type

Constant Voltage

Input Voltage

24V DC

Applied LED

Nichia 157

Power Consumption

5.5w/sq. ft.

Dimming

0 -10 volt with Electronic Driver or MeanWell HLG

Max Wattage per Tail

96w (approx. 50” x 50”, or 324 LEDs) [approx. 1250mm x 1250mm]

Feed Wire

96” [2.44m] of Non Plenum-Rated, 16 AWG Wire [1.29mm2] No Connector; Plenum-Rated Wiring Optional

(2108, 8750 & 962); Title 24 Pending; CCC Pending

[-30° to 40° C ]

ELP-G Light Panel is a specialty backlighting product developed to provide bright and even backlighting for particulary demanding applications, including: • Stretched Fabric Ceilings • High Efficacy Needs • Minimal Cavity Space ELP-G features on-board power supply regulation on each individual ELP-G module, allowing panels to achieve the very high efficiency level of 96 lumens per watt (596 lumens per square foot*) ELP-G can be fabricated in all shapes and sizes. It is dimmable and available in five color temperatures (2700K, 3000K, 3500K, 4000K or 4500K) with a CRI of 87. Visit the VLT website for application photos & most recent IES files, LM79 & LM80 reports.

MADE in USA

[59.18w/sq. m]

(2108, 8750) only ELP-G/T, ELP-G/B;

ELP-G Light Panel

from

L D VLTLE

RoHS Compliant (if specified); LM79, LM80;

50,000 HR lifetime (Ta= -25°C to 40°C; Tc max 75°C); 5 year limited warranty The EU’s Restriction of Hazardous Substances Directive (RoHS) restricts the use of six hazardous substances* in electrical and electronic equipment (* Lead (Pb), Mercury, Cadmium, Hexavalent chromium, Polybrominated biphenyls and Polybrominated diphenyl ether (PBDE)). See list of countries that require RoHS compliance on page 25.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9W212

ELP-G Light Panel Configurator ELP-G uses .10w LEDs on 1”x1” [25.4mm x 25.4mm] centers and includes one pre-drilled mounting hole per 16” [406.4mm] OC. Standard finished thickness is 5/8” [15.9mm]. To order standard shapes (squares, rectangles) and standard LED placements, use the configurator below. Use choices on the Options & Accessories pages to complete your standard product. Custom Configurations: for custom shapes, custom LED placements, or custom mounting hole placements, please contact the VLT factory. Edge to Edge: due to ELP-G’s minimum LED module size of 3”x3”, please specify panel heights/widths divisible by 3 to achieve edge to edge LEDs

ELP - G- _________ - _________ - _________ - _________ - __________ - __________ - _____________ LED

CCT*

Panel Height (in.)

Panel Width (in.)

596 lm/sq. ft. 1006 5.5 w/sq. ft 87 CRI

27 2700°K

Up to 120” [1524mm]

Up to 60” [3048mm]

Options & Accessories RO

RoHS Compliant**

PR

Plenum-Rated Wiring

30 3000°K 35 3500°K 40 4000°K

Wire Length (ft.)

45 4500°K

LED Spacing D

96’’ [2.44m] Standard (Option up to 30’ [9.14m])

1” x 1” [25.4mm x 25.4mm] **See page 25 for list of countries with RoHS or similar restrictions.

ELP-G Modules for DIY Installation If desired, ELP-G modules with 1” x 1” LED spacing can be purchased individually for mounting directly into your millwork or displays. All specifications and color temperature options apply. These versatile lighting units are offered in two versions; please carefully note the difference: ELP-G/T modules are individually mounted onto a 5/8” substrate with a 1/4” spacing margin all around. These “LED tiles” can be butted up against each other and mounted as desired, and the 1/4” margin will maintain the even 1” x 1” spacing of the LED diodes. Modules ship with a protective cover to be removed after installation. Each module includes two 2” interconnector wires for wiring the units together; wires insert easily into terminal blocks on the LED board and do not require soldering. ELP-G/B modules are LED BOARDS ONLY, with no spacing margin. In order to maintain the even 1” x 1” spacing of the LEDs, ELP-G/B boards must be installed with a 1/2” gap between boards on all sides. No protective cover provided. Each module includes two 2” interconnector wires for wiring the units together; wires insert easily into terminal blocks on the LED board and do not require soldering. Mix and match from the 6 module sizes below to configure your custom lighting solution.

ELP-G/T - 1006 - _____ - _________ CCT*

Module Size

ELP-G/B - 1006 - ____ - _________ CCT*

Module Size

27 2700°K

1212 12” x 12” Module (5.5w)

27 2700°K

1212 11.5” x 11.5” Module (5.5w)

30 3000°K

1206 12” x 6” Module (2.8w)

30 3000°K

1206 11.5” x 5.5” Module (2.8w)

35 3500°K

1203 12” x 3” Module (1.5w)

35 3500°K

1203 11.5” x 2.5” Module (1.5w)

40 4000°K

0606 6” x 6” Module (1.5w)

40 4000°K

0606 5.5” x 5.5” Module (1.5w)

45 4500°K

0603 6” x 3” Module (.85w)

45 4500°K

0603 5.5” x 2.5” Module (.85w)

0303 3” x 3” Module (.85w)

0303 2.5” x 2.5” Module (.85w)

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 59


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X142

Light Panel Options & Accessories Substrate Thickness Standard thickness for EssentialLEDs ELP-L Light Panel is 5/8”, consisting of a 1/2” substrate plus 1/8” cover, bonded together [12.7mm substrate plus 3.2mm cover = 15.9mm]. For small pieces of light panel in wall-mounted applications (24” x 24” or less) [609.6mm x 609.6mm], the 3/8” Compact version may be sufficiently robust (1/4” substrate plus 1/8” cover) [6.4mm substrate plus 3.2mm cover = 9.5mm]. Please consult with the VLT factory for recommendations. Standard thickness for ELP-G Light Panel is 5/8” [15.9mm]. ELP-G ships with a removable protective cover with a thickness of 1/8” [3.175mm].

Wiring Exits & Options

WE3 Width Center

Wiring exits can be located at any place along the Light Panel’s edges, or from the back of the panel (ELP-L Only); illustration below shows common exit designations. Unless otherwise specified, WE2* is the standard wire exit; please provide a sketch for custom exit locations. WE1 exits will be located as close to center as possible, depending on LED Board Layout. Maximum wattage per driver is 96 watts, so larger pieces of Light Panel will often require multiple wire exits. Standard termination is 10’ [3.05m] of plenum rated 16-gauge [1.02mm2] wire, no connector ; up to 30’ [9.14m] is available as an option.

WE1 Back Center (ELP-L Only)

WE2* Height Center (Standard)

.

.

.

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

. . . . . . . . . .

. . . . . . . . . .

Mounting For wall-mount installations, EssentialLEDs Light Panels install with #8 screws (provided by others; length will vary depending on mounting surface) and #8 disc washers (included with your order). Disc washers provide even load distribution. For a clean finish, white adhesive “dot” labels are provided to cover heads of #8 screws. ELP-G ships with a removable clear installation cover, this should be discarded after mounting with #8 screws Disc Washer Pre-drilled Hole

ELP-L Diffuser Panel page 60

Diffuser panels are available to match the size and shape of your ELP-L LED Light Panel. Standard diffuser panel is fabricated using .118” [2.99mm] Opal 3 white acrylic. We can also fabricate diffuser panels using alternative acrylics, decorative resins or other materials per your specification. Please contact VLT factory for other options. Standard mounting for diffuser panels is every 16” - 24” [400mm - 600mm], OC.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9X142

ELP-L Stand-off Hardware For Use with Acrylic Diffuser For wall-mount applications, aluminum stand-offs provide a simple way to mount both the ELP-L LED Light Panel and an acrylic diffuser panel, with a fixed 2” [12.7mm] separation that allows full blending of the LED light points. Stand-off hardware is typically placed every 16” - 24” [400mm - 600mm] OC. See illustration below. Integrated Diffuser Layer

White Rigid PVC Substrate

Installation with Diffuser Panel Using Stand-off Hardware

Pre-drilled Mounting Holes 1 per 16” OC (standard))

Diffuser Panel

Stand-offs 90º

(Illustration uses frosted glass diffuser; visible dot pattern is design choice)

5/8"

ELP-L Suspension Hardware LED Light Panel can be used as general overhead lighting when combined with a T-Bar system (provided by others) or suspended by a combination of specialized grips and aircraft cable. See illustration below. Suspended Mount Using Cable & Grips (Aluminum Framing Required)

Aircraft Cable

Stand-off

Diffuser Panel

ELP-L Aluminum Framing When larger pieces of ELP-L LED LIght Panel are used in a suspended applications, an aluminum frame provides added rigidity and support for the PVC substrate and helps to prevent bowing of the panel during installation. Aluminum framing will add a slight raised edge (1/16” [1.6mm]) around the periphery of the panel, but will not alter the height and width dimensions of the panel. Framing cannot be used to support light panel in a suspended application; cable attachments must penetrate the panel substrate.

ELP-L Substrate Color Depending on your application, a substrate color other than the standard white may be desirable for your ELP-L LED Light Panel. Expanded PVC plastic comes in a variety of colors (Black, Gray, Beige, Purple, Burgundy, Red, Orange, Yellow, Green & Blue); please contact factory for samples.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 61


Visual Lighting Technologies

EssentialLEDs Notes: __________________________________________________

_______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ page 62

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs constant voltage drivers VLT offers electronic and magnetic drivers of various sizes to complete your LED lighting system. All “Non-Dimming” Electronic drivers can be dimmed with the addition of a 0-10 volt dimming module (AC - PWR - DIM); electronic drivers with self-contained 0 - 10v dimming require Relay Module (AC - PWR - RLY) to reach full “off” position. Use of a low-voltage magnetic driver with your system allows it to be dimmed using a typical wall-mount lighting control system (i.e. Lutron or others). In some applications, such as free-standing display units, a driver with a standard wall plug may be a convenient option; you may specify this option by adding “-CP” to the driver’s catalog number when you order. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system.

Wattage

OSRAM

(US, Can, MEX) Page 34

Page 36

MEAN WELL - CLASS 1

Page 69

Page 68

Page 46

MEANWELL-CLASS2 MEAN WELL - CLASS 2 VLT HELD

Page 32

VLT HMLD

All Units 24v DC

Non Magnetic Electronic Self-Contained Dimming Dims to Low-Voltage Low-Voltage 0 - 10v (Needs OT Dim Zero Dimming Dimming Dimming Module)

Requires Relay Module for Full Off

IP Rating & Enclosure

48w

g

g

IP67, Nema 3R Box Included

96w

g

g

IP67, Nema 3R Box Included

3 x 96w

g

g

IP67, Nema 3R Box Included

48w

g

g

IP67, Nema 3R Box Included

96w

g

g

IP67, Nema 3R Box Included

16w

g

IP67, Requires J-Box

25w

g

IP67, Requires J-Box

60w

g

IP67, Requires J-Box

90w

g

IP67, Requires J-Box

40w

g

IP67, Requires J-Box

80w

g

IP67, Requires J-Box

100w

g

IP67, Requires J-Box

120w

g

g

IP67, Requires J-Box

150w

g

g

IP67, Requires J-Box

185w

g

g

IP67, Requires J-Box

240w

g

g

IP67, Requires J-Box

320w

g

g

IP67, Requires J-Box

30w

g

g

IP40, Requires J-Box

75w

g

g

IP64, Requires J-Box

96w

g

g

IP67, Requires J-Box

96w /DIM

g

g

Cord and Wall Plug

   

g

IP67, Requires J-Box

= Standard  = Optional, for use in display cases, add -“CP” to the end of this drivers to have factory install a cord and plug g

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 63


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y022

VLT Hybrid Magnetic Linear Drivers For use with EssentialLEDs Linear and ELP-L Light Panel products; NOT for use with ELP-G Light Panel. All magnetic drivers are not the same, and the differences can have a substantial impact on the performance and longevity of your LED system. Standard magnetic drivers labeled “24v DC” utilize rectifiers to produce the 24v DC current, but the current from these models may include an AC component that can result in actual peak voltages ranging as high as 50v DC. These voltage levels will cause permanent damage to EssentialLEDs products. VLT Hybrid Magnetic Linear Drivers feature hybrid linear drive circuits that will produce maximum regulated voltage not greater than 24.3v DC; they are the ONLY magnetic drivers guaranteed for use with EssentialLEDs products. They are compatible with all magnetic low-voltage forward phase dimmers and are fully potted to dim without humming or buzzing. VLT HMLD drivers are UL Listed and outdoor rated for wet locations (UL 1012 & UL1013). They come complete with knock-outs and mounting brackets for easy installation, indoors or out. Use of any other magnetic drivers will void product warranty. Manufactured in Southern California. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 48W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Listings:

Manufacturer:

96W 24V DC

UL Listed(UL1012,UL1310),ETL Listed(UL2108,UL8750,UL962)

Visual Lighting Technologies SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Listings: Manufacturer: 3 X 96W 24V DC

1 -96VA 120 / 240 / 277 VAC 50/60 Hz 24V DC ±1% 11.25”L x 3.37”W x 3.25”H [285.8mm L x 85.6mm W x 82.6 mm] 1 50/60 Hz 7.8 lbs. [3.54 kg] 140° F [60° C] NEMA 3R

Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Listings: Manufacturer

120 240 277

Description: Constant voltage driver from VLT, 48w, 2A; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP” to specify with optional cord & plug for display case application. NEMA 3R case; indoor/ outdoor rated (non-submersible).

Made in USA CAT. NO. HMLD - 96 - 24DC 120 240 277

Description: Constant voltage driver from VLT, 96w, 4A; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP” to specify with optional cord & plug for display case application. NEMA 3R case; indoor/ outdoor rated (non-submersible).

UL Listed(UL1012,UL1310),ETL Listed(UL2108,UL8750,UL962)

Visual Lighting Technologies SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions:

page 64

1-48VA 120 / 240 / 277 VAC 50/60Hz 24V DC ±1% 11.25”L x 3.37”W x 3.25”H [285.8mm L x 85.6mm W x 82.6 mm] 1 50/60 Hz 6 lbs. [2.72 kg] 140° F [60° C] NEMA 3R

CAT. NO. HMLD - 48 - 24DC -

1 -288VA 120 / 240 / 277 VAC 50/60 Hz 24V DC ±1% 12.12”L x 8.43”W x 4.43”H [307.8mm L x 214.1mm W x 112.5 mm] 3 50/60 Hz 20.4 lbs. [9.25 kg] 140° F [60° C] NEMA 3R

Made in USA CAT. NO. HMLD - 288 - 24DC 120 240 277

Description: Constant voltage driver from VLT, 3 x 96w, 4A each; fully dimmable with low-voltage magnetic dimmer; 120VAC - 277VAC input; 24VDC regulated output, 96w each (meets Class 2 output limits). Conduit access wiring compartment for wall mounting. UL Listed. Add “-CP” to specify with optional cord & plug for display case application. NEMA 3R case; indoor/outdoor rated (non-submersible).

UL Listed(UL1012,UL1310),ETL Listed(UL2108,UL8750,UL962)

Visual Lighting Technologies

Made in USA

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y082 VLT Hybrid Electronic Linear Drivers For use with EssentialLEDs Linear and ELP-L Light Panel products; NOT for use with ELP-G Light Panel.

VLT Electronic Switching Drivers feature solid state drive circuits that will produce maximum voltage not greater than 24.3v DC; fully dimmable electronic LED driver. They are compatible with all electronic low-voltage reverse phase dimmers and are fully potted to dim without humming or buzzing. VLT HMLD drivers are UL Listed and outdoor rated for wet locations (UL 1012 & UL1013). They come complete with knock-outs and mounting brackets for easy installation, indoors or out. Manufactured in Southern California. *Available 1st quarter 2014 ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 48W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Listings:

Manufacturer:

96W 24V DC

1-48 VA 120/240/277 24v DC ±1% 10.75”L x 2.25”W x 1.375”H [273mm L x 57.2mm W x 35mm] 1 50/60Hz 1.5 lbs (0.7 kg) 40° F [60° C] NEMA 3R

Circuits Frequency: Weight Max Ambient Temp.: IP Rating: Listings: Manufacturer:

120 240 277

Description: Constant voltage driver from VLT, 48w, 2A; fully dimmable with low-voltage electronic dimmer; 120VAC - 277VAC input; 24VDC output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP” to specify with optional cord & plug for display case application.

NEMA 3R case; indoor/outdoor rated (non-submersible).

UL Listed(UL1012,UL1310),ETL Listed(UL2108,UL8750,UL962)

Visual Lighting Technologies SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions:

CAT. NO. HELD - 48 - 24DC -

1-96 VA 120/240/277 24v DC ±1% 10.75”L x 2.25”W x 1.375”H [273mm L x 57.2mm W x 35mm] 1 50/60Hz 1.5 lbs (0.7 kg) 40° F [60° C] NEMA 3R

Made in USA CAT. NO.

HELD - 96 - 24DC -

120 240 Description: Constant voltage driver from VLT, 96w, 4A; fully dimmable with low-voltage electronic 277

dimmer; 120VAC - 277VAC input; 24VDC output (meets Class 2 output limits). Conduit access wiring compartment for wall mounting; UL Listed. Add “-CP” to specify with optional cord & plug for display case application. NEMA 3R case; indoor/outdoor rated (non-submersible).

UL Listed(UL1012,UL1310),ETL Listed(UL2108,UL8750,UL962)

Visual Lighting Technologies

Made in USA

page 65

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y062

Class 1 Electronic Dimming Drivers from Mean Well ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. Self-contained dimming drivers marked with red dot (n ) require Relay Module (AC - PWR - RLY) to reach full “off” position. n 120W 24V DC

n 150W 24V DC

SPECIFICATIONS Load: 1 - 120VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC ±1.0% Dimensions: 8.66”L x 2.68”W x 1.53”H [219.9mm L x 68.1mm W x 38.6mm H] Weight: 2 lb. 7.50 oz [0.907 kg] Max Ambient Temp.: 158° F [70° C] IP Rating: IP65/Damp Listings: ETL Listed (UL 2108, UL 8750), CE Manufacturer: Mean Well SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

n 185W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

n 240W 24V DC

Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

page 66

1-185VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.98”L x 2.68”W x 1.53” H [228.1mm L x 68.1mm W x 38.9mm H] 2 lbs. 8.6 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions:

n 320W 24V DC

1 - 150VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.98”L x 2.68”H x 1.53”H [228.1mm L x 68.1mm W x 38.9mm H] 2 lb. 8.56 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

1 - 240w 90-305VAC 50/60Hz 24V DC ±1.0% 9.61”L x 2.68”W x 1.53” H [244.1mm L x 68.1mm W x 38.9mm H] 2 lbs. 13.85 oz. [0.907 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1 - 320w 90-305VAC 50/60Hz 24V DC ±1.0% 9.92”L x 3.54”W x 1.72” H [251.9mm L x 90mm W x 44mm H] 4 lbs. 2.31 oz. [1.81 kg] 158° F [70° C] IP65/Damp ETL Listed (UL 2108, UL 8750), CE Mean Well

CAT. NO.

HLG - 120H

Description: Constant voltage 120 watt 24 volt LED driver from Mean Well; 1-120VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off” position. IP65/Damp.

CAT. NO.

HLG - 150H

Description: Constant voltage 150 watt 24 volt LED driver from Mean Well; 1-150VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off” position. IP65/Damp.

CAT. NO.

HLG - 185H

Description: Constant voltage 185 watt 24 volt LED driver from Mean Well; 1-185VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off” position. IP65/Damp.

CAT. NO.

HLG - 240H

Description: Constant voltage 240 watt 24 volt LED driver from Mean Well; 1-240VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off” position. IP65/Damp.

CAT. NO.

HLG - 320H

Description: Constant voltage 320 watt 24 volt LED driver from Mean Well; 1-320VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). Requires control device; requires Relay Module (AC - PWR - RLY) to reach full “off” position.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y092 Class 2 Electronic Dimming Drivers from Mean Well

ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 16W 24V DC

25W 24V DC

40W 24V DC

60W 24V DC

90W 24V DC

SPECIFICATIONS Load: 1-16VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 5.82”L x 1.57”W x 1.25”H 148mm L x 40mm W x 32mm H Weight: 7.4oz [0.21kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-25VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 5.82”L x 1.57”W x 1.25”H 148mm L x 40mm W x 32mm H Weight: 12.7oz [0.36kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-40VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.39”L x 1.69”W x 1.25”H 162.5mm L x 43mm W x 32mm H Weight: 15.5oz [0.44kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-60VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.39”L x 1.69”W x 1.25”H 162.5mm L x 43mm W x 32mm H Weight: 15.9oz [0.45kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well SPECIFICATIONS Load: 1-90VA Input Voltage: 90-305VAC 50/60Hz Output Voltage: 24V DC±4% Dimensions: 6.33”L x 2.40”W x 1.41”H 161mm L x 61mm W x 36mm H Weight: 1 lb. 8.7oz [0.7kg] Max Ambient Temp.: 122°F [50°C] IP Rating: IP67 Listings: ETL Listed (UL 2108, UL 8750, UL 962) , CE Manufacturer: Mean Well

CAT. NO.

LPF-16

Description: Constant voltage 16 watt 24 volt LED driver from Mean Well; 1-16VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO.

LPF-25

Description: Constant voltage 25 watt 24 volt LED driver from Mean Well; 1-25VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO.

LPF-40

Description: Constant voltage 40 watt 24 volt LED driver from Mean Well; 1-40VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO. LPF-60

Description: Constant voltage 60 watt 24 volt LED driver from Mean Well; 1-60VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

CAT. NO. LPF-90

Description: Constant voltage 90 watt 24 volt LED driver from Mean Well; 1-90VA load; 90-305v 50/60Hz input; 24V output ± 4.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP67 Damp/Wet.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 67


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y032

Drivers - CLASS 2 Electronic Dimming Drivers from Mean Well ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 40W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

80W 24V DC

1 - 40VA 90-305VAC 50/60Hz 24V DC ±1.0% 6.73”L x 2.42”W x 1.45”H 170.9mm L x 61.5mm W x 36.8mm H 1 lb. 9.7 oz [0.45 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

100W 24V DC

1 - 80VA 90-305VAC 50/60Hz 24V DC ±1.0% 7.70”L x 2.42”W x 1.52”H 195.6mm L x 61.5mm W x 36.8mm H 1 lb. 13.7 oz. [0.45 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-100VA 90-305VAC 50/60Hz 24V DC ±1.0% 8.66”L x 2.68”W x 1.53” H 219.9mm L x 68.1mm W x 38.9mm H 2 lbs. 7.5 oz. [0.91 kg] 140° F [60° C] IP65/Damp ETL Listed (UL 2108, UL 8750) , CE Mean Well

CAT. NO. HLG - 40H

Description: Constant voltage 40 watt 24 volt LED driver from Mean Well; 1-40VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

CAT. NO. HLG - 80H

Description: Constant voltage 80 watt 24 volt LED driver from Mean Well; 1-80VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

CAT. NO. HLG - 100H

Description: Constant voltage 100 watt 24 volt LED driver from Mean Well; 1-100VA load; 90-305v 50/60Hz input; 24V output ± 1.0%. Three in one dimming function (1 - 10V dc, PWM signal or resistance). IP65/Damp.

page 68

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y042 Drivers - CLASS 2 Electronic Drivers from Osram

Electronic drivers can be dimmed with the addition of a 0-10 volt dimmer module (AC - PWR - DIM). Self-contained dimming drivers marked with red dot (n ) require Relay Module (AC - PWR - RLY) to reach full “off” position. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 30W 24V DC

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

75W 24V DC

1 - 30VA 120v 50/60Hz 24V DC ±5% 5.91”L x 1.6”W x 1.2”H [150mm L x 40.6mm W x 30.4mm H] 10.08 oz. [0.28kg] 104° F [40°C] Dry ETL Listed (UL 2108, UL 8750, UL 962) Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

96W 24V DC

1 -75VA 120-277V 50/60Hz 24V DC ±2% 9.48”L x 1.68”W x 1.17”H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750) CSA Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

n 96W24V DC - DIMMING DRIVER

1-96VA 120-277V 50/60Hz 24V DC ±1% 9.48”L x 1.68”W x 1.17”H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750), UL, CUL Osram

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer:

1-96VA 120-277V 50/60Hz 24V DC ± 1% 9.48”L x 1.68”W x 1.17”H [240.7mm L x 42.7mm W x 29.7mm H] 1 lb. 5.6 oz. [0.45 kg] 104° F [40°C] Damp ETL Listed (UL 2108, UL 8750) Osram

CAT. NO. OT30/120/24/CORD

Description: Constant voltage 30 watt 24 volt LED driver from Osram; 1-30VA load; 120v 50/60Hz input; 24V output ±5%; dry rated. On-cord on/off switch included.

CAT. NO. OT75W/24V/UNV

Description: Constant voltage 75 watt 24 volt LED driver from Osram; 1-75VA load; 120v-277v 50/60Hz input; 24V output ± 2%; damp rated.

CAT. NO.

OT96W/24V/UNV

Description: Constant voltage 96 watt 24 volt LED driver from Osram; 1-96VA load; 120v-277v 50/60Hz input; 24V output ± 1%; damp rated.

CAT. NO. OT96W/24V/UNV/DIM

Description: Constant voltage 96 watt 24 volt driver from Osram; 1-96VA load, 120v-277v 50/60Hz input; 24V output DC; ±1%; driver with self-contained 0-10v dimming capability. Control device required;

requires Relay Module (AC - PWR - RLY) to reach full“off” position. Damp rated.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 69


Visual Lighting Technologies

EssentialLEDs Notes: __________________________________________________

page 70

_______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs constant current drivers VLT offers Constant Current drivers of various sizes to complete your LED lighting system. Unlike Constant Voltage systems, in which the driver provides a fixed voltage, Constant Current LED systems provide a fixed current, and the voltage will vary depending on the LED load. The more LEDs that are attached to a Constant Current driver, the higher the output voltage will be, up to a maximum set by the driver. In systems where the number of LEDs is known, Constant Current drivers provide optimal efficiency for the system. The Constant Current drivers offered below employ a range of dimming control options; please see individual driver specifications and descriptions for more information. In some applications, such as free-standing display units, a driver with a standard wall plug may be a convenient option; you may specify this option on 30w or 50w drivers by adding “-CP” to the driver’s catalog number when you order. ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system

Lightech 700mA

Lightech 350mA

eldoLED DMX

eldoLED 0-10V

Drive Wattage Current

g

Phase Self-Contained DMX Non Dims to Control 0 - 10v Dimming Dimming Zero Dimming Dimming

IP Rating & Enclosure

Cord and Wall Plug

30

350-700

g

g

Damp/Dry, Requires J-Box

50

350-700

g

g

Damp/Dry, Requires J-Box

100

350-700

g

g

Damp/Dry, Requires J-Box

30

350-700

g

g

Damp/Dry, Requires J-Box

50

350-700

g

g

Damp/Dry, Requires J-Box

100

350-700

g

g

Damp/Dry, Requires J-Box

6

350

g

IP67, Requires J-Box

10

350

g

IP67, Requires J-Box

18

350

6

700

g

IP67, Requires J-Box

10

700

g

IP67, Requires J-Box

18

700

g

IP67, Requires J-Box

36

700

g

IP67, Requires J-Box

g

IP67, Requires J-Box

= Standard

 = Optional, for use in display cases, add -“CP” to the end of this drivers to have factory install a cord and plug CORD AND WALL PLUG OPTION

SPECIFICATIONS

Dimensions: 7.05”L x 4.70”W x 1.8” H [180mm L x 119.4 mm W x 45.72 mm H] Material: Aluminum Junction Box

CAT. NO. - CP

Description: Cord and Wall Plug. Optional, for use in display cases.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 71


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y102

Constant Currrent eldoLED Drivers - 350/500/700mA - Dimmable - 0-10V ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 30W SOLOdrive DIMMABLE 0-10V

SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

50W SOLOdrive DIMMABLE 0-10V

30W Total 120-277 V 50/60Hz Single Channel 2-55 V each 5.12”L x 2.83”W x 1.10” H [130mm L x 72mm W x 28mm H] 10 oz. [284 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, 0-10V

SPECIFICATIONS

CAT. NO. SL0361S1350 500 700

Description: Single Channel Constant Current 30 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 30 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 2 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed. Add “-CP” to specify standard wall plug on driver. CAT. NO. SL0561S1-

350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W SOLOdrive DIMMABLE 0-10V

50W Total 120-277 V 50/60Hz Dual Channel 2-55 V each 5.12”L x 2.99”W x 1.18” H [130mm L x 76mm W x 30mm H] 12 oz. [350 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, 0-10V

SPECIFICATIONS

Description: Dual Channel Constant 500 700 Current 50 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 50 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 2 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed. Add “-CP” to specify standard wall plug on driver. CAT. NO. SL1060S1350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W Total 120-277 V 50/60Hz Quad Channel 2-55 V each 8.64”L x 3.15”W x 1.18” H [220mm L x 80mm W x 30mm H] 31 oz. [880 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750) eldoLED Yes, 0-10V

Description: Quad Channel Constant 500 700 Current 100 watt LED Driver from EldoLED, Factory programmable output from 200mA to 1050mA; 100 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output 4 Channels, 0 – 10v Dimmable, current sink or current source. Full Dimming from 100% to 0%, logarithmic dimming curve. Damp/Dry Rated. ETL listed.

page 72

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y112 eldoLED Drivers - 350/500/700mA - Dimmable - DMX

ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 50W POWERdrive DIMMABLE DMX

SPECIFICATIONS

CAT. NO. PW0562S1350

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable: 100W POWERdrive DIMMABLE DMX

50W 120-277 V 50/60Hz 2-55 V 4.68”L x 2.99”W x 1.18” H [119mm L x 76mm W x 30mm H] 12 oz. [350 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750, UL 962) eldoLED Yes, DMX SPECIFICATIONS

Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

100W 120-277 V 50/60Hz 2-55v 8.64”L x 3.15”W x 1.18” H [220mm L x 80mm W x 30mm H] 31 oz. [880 g] 122° F [50° C] Damp/Dry ETL Listed (UL 2108, UL 8750) eldoLED Yes, DMX

Description: Constant current 50 500 700 watt LED Driver from EldoLED, DMX Controllable, 3 channels (wattage can be dedicated to a single channel or spread across all 3 channels), Factory programmable output from 200mA to 1050mA; 50 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output . Full Dimming from 100% to 0%. Damp/Dry Rated. ETL listed.

CAT. NO. PWR106S1350 500 700

Description: Constant current 100 watt LED Driver from EldoLED, DMX Controllable, 3 channels (wattage can be dedicated to a single channel or spread across all 3 channels), Factory programmable output from 200mA to 1050mA; 100 VA load; 120 – 277v 50/60Hz input; 2 – 55v Output . Full Dimming from 100% to 0%. Damp/Dry Rated. ETL listed.

page 73

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y122

Constant Currrent Drivers - 350mA ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 6W 350MA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimming:

10W 350mA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: Listings: Manufacturer: Dimming:

18W DC 350mA DIMMABLE

6W 120-277V 50/60Hz 2-20V 1.77”L x 1.77”W x 0.98”H [45mm L x 45mm W x 25mm H] 4 oz. [0.25kg] 122° F [50°C] IP67 ETL Listed (UL, 2108, UL 8750) GE Lighting [Lightech] No

10 W 120-240V 50/60Hz 3-29V 3.94”L x 1.57”W x 1.05”H [100mm L x 40mm W x 27mm H] 4 oz. [0.09 kg] 122° F [50°C] ETL Listed (UL, 2108, UL 8750) GE Lighting [Lightech] No

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimming:

18w 108 -132V 50/60Hz 5.6 - 42 V 7.8”L x 0.73”W x 1.18”H [198mm L x 44mm W x 30mm H] 9.8 oz. [0.28 kg] 122° F [50°C] IP67 ETL Listed (UL, 2108, UL 8750) Lightech Yes, with Trailing edge, down to 10%

CAT. NO.

66864 US

Description: Constant current 6 watt 350mA LED Driver from GE Lighting (Lightech); 6 VA load; 120 – 277v 50/60Hz input; 350mA 2 – 20v Output +/1.0%. Non Dimmable. IP67 Rated. ETL listed. For use in the USA.

CAT. NO.

66867 US

Description: Constant current 10 watt 350mA LED Driver from GE Lighting (Lightech); 10 VA load; 120 – 240v 50/60Hz input; 350mA 3 – 29v Output +/- 1.0%. Non Dimmable. IP20 Rated. ETL listed. For use in the USA.

CAT. NO.

66885 US

Description: Constant current 18 watt 350mA LED Driver from GE Lighting (Lightech); 18 VA load; 108 – 132v 50/60Hz input; 350mA 5.6 – 42v Output +/1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

page 74

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y132 Constant Currrent Drivers - 700mA

ALL DRIVERS are ETL Listed (UL 2108, UL 8750), when used as part of an EssentialLEDs Linear or EssentialLEDs Light Panel system. 6W DC 700mA NON-DIM

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

18W DC 700mA Aluminum - Dimmable

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

LED 36W DC 700mA Aluminum - Dimmable

6W 120-277 V 50/60Hz 2.0 - 11.0V 1.77”L x 1.77”W x .98” H [45mm L x 45mm W x 25mm H] 4 oz. [0.11 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] No

18W 120-277 V 50/60Hz 4-26V 6.02”L x 1.57”W x 1.22” H [133mm L x 40mm W x 30.5mm H] 12 oz. [0.34 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] Yes, with Trailing edge, down to 10%

SPECIFICATIONS Load: Input Voltage: Output Voltage: Dimensions: Weight: Max Ambient Temp.: IP Rating: Listings: Manufacturer: Dimmable:

36 W 120-277 V 50/60Hz 4-42V 6.02”L x 1.57”W x 1.20” H [153mm L x 40mm W x 31mm H] 12 oz. [0.34 kg] 122° F [50° C] IP67 ETL Listed (UL 2108, UL 8750) GE Lighting [Lightech] Yes, with Trailing edge, down to 10%

CAT. NO. 66866

Description: Constant current 6 watt 700mA LED Driver from GE Lighting (Lightech); 6 VA load; 120 – 277v 50/60Hz input; 700mA 2 – 11v Output +/- 1.0%. Non Dimmable. IP67 Rated. ETL listed. For use in the USA.

CAT. NO. 66884

Description: Constant current 18 watt 700mA LED Driver from GE Lighting (Lightech); 18 VA load; 120 – 277v 50/60Hz input; 700mA 4.0 – 26v Output +/- 1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

CAT. NO. 66904

Description: Constant current 36 watt 700mA LED Driver from GE Lighting (Lightech); 36 VA load; 120 – 277v 50/60Hz input; 700mA 4.0 – 42v Output +/- 1.0%. Dimmable with trailing edge dimmers, down to 10%. IP67 Rated. ETL listed.

page 75

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y142

Dimming & Controls Notes on Dimming and Controls: EssentialLED products can be dimmed using any of the self-contained dimming drivers offered on the previous pages, OR by combining Osram’s 0-10v Dimming Module with any of our electronic drivers. All self-contained dimming drivers (marked with a red dot n ) require a Relay Module (AC - PWR - RLY) to reach full “off” position. Magnetic drivers can be dimmed using a standard magnetic low voltage wall dimmer. Whether you choose a self-contained dimming driver, or combine a 0-10v dimming module and standard driver, you will need a device to control the dimming effect. We offer the wall-mount Lutron Diva or a Local Dimming Controller that attaches directly to the driver unit.

Control & Interface Accessories 0 - 10V/ DMX DIMMING MODULE

SPECIFICATIONS Dimensions: 6.77” L x 1.65” W x 0.79” H [172mm L x 42mm W x 20mm H] Weight: 0.165lbs [74.84 grams] Nominal Input Voltage: 24 OT DIM Max.Output Power (W): 120w, 60w each output, 2 channels OT DMX Max.Output Power (W): 140w, 48w each output, 3 channels OT DIM Max Output Current per Channel (A): 2.5 A OT DMX Max Output Current per Channel (A): 2.0 A Output Frequency (Hz): 135 Input Voltage Range: 9.5 - 25v DC Dimming Range: 0 - 100% Control Current: 0.6 mA max. Temp. Range: 4° to 122°F [-20° to +50°C] Max. Case Temperature: 158°F [70°C] Manufacturer: Osram

LUTRON DIVA 0 - 10V CONTROL

SPECIFICATIONS

Dimensions: 4.69”L x 0.94”W x 0.30”H [119mm L x 75mm W x 7.6mm H] Control: 0 -10v 30 mA Manufacturer: Lutron Finish Color: White MOTION SENSOR

SPECIFICATIONS Dimensions: 3.00”L x 1.75” W x 1.38”H [76.2mmL x 44.5mmW x 34.9mmH] Material: Plastic Case

DOOR/DRAWER PRESSURE SWITCH

page 76

CAT. NO. AC - PWR DIM DMX

Description: 0 - 10v dimming module from Osram for use in conjunction with standard electronic drivers (Constant Voltage only); requires control device. Two outputs of 60w each, 120w max. See wiring diagram on page 80.

CAT. NO. AC - PWR - 4WF Description: Control device from Lutron for control of 0 - 10v dimming; can be used in conjunction with OT Dim module and standard electronic driver (Constant Voltage only) or with self-contained dimming drivers (Constant Voltage or Constant Current). Wall mount paddle switch with linear slide; uses low-voltage wiring for easy installation. White. CAT. NO. AC - PWR - MO Description: Mini PIR Motion Sensor switch automatically powers on LEDs for 1 to 10 minutes (variable setting); 6 amp maximum load; detection range of 15 feet, 60° from center of sensor. CAT. NO. AC - PWR - PSW

Dimensions: 1.50” L x 1.63” W x 0.56”H [38.1mm L x 41.3mm W x14.3mm H] Material: Plastic Case

Description: Pressure Switch mechanically connects/disconnects wire connection to automatically power LEDs when cabinet door or drawer is opened. Mount inside so that plunger is held in off position when door/drawer is closed.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Y142 Control & Interface Accessories LOCAL DIMMING CONTROLLER

SPECIFICATIONS

Dimensions: 1.5” Diameter; 4.5” wire lead [38.1mm Diameter; 114.3 mm wire lead] Material: Plastic Case

LUTRON RELAY MODULE

CAT. NO. AC - PWR - KNB Description: Local dimming control device for 0-10v dimming; use in conjunction with 0 - 10v dimming module (Cat. No. AC - PWR - DIM) (Constant Voltage only) or in conjunction with self-contained dimming drivers (Constant Voltage or Constant Current.) CAT. NO. AC - PWR - RLY

Dimensions: 3.75” L x 2.25” W x 1.38”H [95.3mm L x 57.15mm W x 35.05mm H]

Manufacturer: Lutron

Description: Power Relay Module from Lutron for use with electronic self-contained 0 - 10v dimming drivers; shuts input power to full “off”. See chart on page 63 for applicable drivers.

page 77

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z022

Circuit Diagrams for EssentialLEDs Linear (.25w LEDs) NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) 20” total total 20”

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 128” total total 128”

DIMMABLE with HMLD Magnetic Low-Voltage Driver (i.e. VLT Hybrid Magnetic Linear Dimming Drivers)

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 208” total total 208”

D D II M M

DRIVER SELECTOR CLASS 2

Driver Total Nominal Inches of Linear Fixture Driver A “Z”Total Inches of Linear Fixture A Driver .25 watt Driver LEDs .10 watt LEDs DriverSizes 1018 2545/3545/4545 2590/3590/4590 LED Board LED Board LED Board Load 10 39” 16”Load 30w 128” 60” 28” 25 48”120w 100” 40w 172” 80” 40” 30 59”150w 118”

Class 2 Drivers

48w 48 75w 60 80w 75

204”

96w 96

416”

324” 348”

96” 193” 156” 240”

48”

168” 299” 200” 386”

84”

76” 100”

Class 191” 185w Drivers 115” 240w 146” 185”320w

Total Nominal Inches of Linear Fixture “Z” 1018

2545/3545/4545

2590/3590/4590

LED Board

LED Board

LED Board

524”

252”

124”

656”

320”

160”

808”

396”

196”

1,052”

512”

256”

1,400”

688”

344”

page 78 96 96 Magnetic Low-Voltage Low-Voltage Magnetic Dimmer Dimmer

EssentialLEDs Linear Linear Fixture Fixture EssentialLEDs

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z032

Circuit Diagrams for EssentialLEDs Panel (ELP-L or ELP-G) NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION) .95 Sq. ft. or 34 LEDs max.

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 5.6 Sq. ft. or 203 LEDs max.

DIMMABLE with Meanwell Class 1 Driver

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 26 Sq. ft. or 942 LEDs max.

DRIVER SELECTOR

Class 2 Drivers

Class 1 Drivers

DRIVER SIZE 10w 25w 48w 60w 96w 150w 185w 240w 320w

# of .25w LEDs 29 73 132 176 282 441 544 706 942

*

# Sq. Ft. of “A” 0.8 2 3.9 4.9 7.8 12.2 15.1 19.6 26.2

# Sq. Ft. of “D” (.10w LEDs) 1.6 4.1 2.8 9.8 15.7 24.5 30.3 39.3 *2531 LED Only 52.3

10w 24v Driver 95-265v 50/60hz 60w 24v Driver 100-277v 50/60hz

Line Voltage Input

320w 24v Driver 100-277v 50/60hz

Interconnect Wire

0-10v Dimmer

EssentialLEDs Light Panel with .25 watt LED

24V - (2) 18AWG - 66’ max total length

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 79


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z042

Circuit Diagrams for Dimming with Osram 0-10v Dimming Module Wiring Diagram & Notes: • AC-PWR-DIM may be controlled by 1-10V DC controllers, 1-10V converters, or 100 k Ohm linear potentiometers. • AC-PWR-DIM has two dependant channel outputs (internally, these channels are in parallel). The sum of the loads from the channel outputs must not exceed the maximum output of the OTDIM (52.2W at 10V and 120W at 24V). LED Driver Input

Control signal 1…10VDC

DIMMABLE

N L

Dimming Interface Module

LED Fixtures

10-24VDC 1-10VDC <0.6mA

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 688” total

DIMMABLE

(SHOWN IN MULTIPLE BRANCH CONFIGURATION) 26.2 Sq. ft. or 942 LEDs max.

page 80

320w 24v Driver 100-277v 50/60hz

Line Voltage Input

0-10v Dimmer

24V - (2) 18AWG - 66’ max total length Interconnect Wire EssentialLEDs Linear Fixture EssentialLEDs Light Panel ELP-L

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z052 Circuit Diagrams for EssentialLEDs LightRun NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION)

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

“Z”

“Z”

S

DIMMABLE (SHOWN IN MULTIPLE CHANNEL CONFIGURATION) 0-10V / DMX

“Z” Channel 1

S

Channel 2

D I M

- OR -

Phase Control Channel 1

D I M

(1 Ch. Only)

Total Nominal Inches of Light Run “Z” Driver Current Driver Load

350mA

500mA

700mA

6w

20”

-

-

10w

30”

-

-

18w

46”

-

21”

30w eldoLED

65” per ch, 65“ total

65” per ch, 65“ total

47” per ch, 47“ total

36w

-

-

21”

50w eldoLED

65” per ch, 130“ total

65” per ch, 119“ total

65” per ch, 78“ total

100w eldoLED

65” per ch, 260“ total

65” per ch, 237“ total

65” per ch, 157“ total

Constant Current Driver Phase Control, 0-10v, DMX Dimmer

S

2 or 4 way Constant Current Splitter in-series connection

Line Voltage Input (2) 20AWG - 33’ max total length Interconnect Wire 0-10v or DMX control wires EssentialLEDs Light Run Fixture

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 81


Visual Lighting Technologies

EssentialLEDs

Cut Sheet #9Z062

Circuit Diagrams for EssentialLEDs Elegance² / Round NON-DIM

(SHOWN IN SINGLE BRANCH CONFIGURATION)

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

S

DIMMABLE (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION) 0-10V / DMX Channel 1

D I M

Channel 2

S

- OR - Phase Control D I M

Channel 1 (1 Ch. Only)

Total # of Elegance2 / Round Fixtures

Driver Load 6w 10w 18w 30w eldoLED 50w eldoLED 100w eldoLED

Constant Current Driver Phase Control, 0-10v, DMX Dimmer

page 82 S

2 or 4 way Constant Current Splitter in-series connection

350mA 1 2 3 4 per ch, 4 total 4 per ch, 8 total 4 per ch, 16 total

Line Voltage Input (2) 20AWG - 33’ max total length Interconnect Wire 0-10v or DMX control wires EssentialLEDs Elegance² / Round

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies Cut Sheet #9Z072 Circuit Diagrams for EssentialLEDs Orb

NON-DIM

(SHOWN IN MULTIPLE BRANCH CONFIGURATION)

S

DIMMABLE (SHOWN IN MULTIPLE BRANCH, MULTIPLE CHANNEL CONFIGURATION) 0-10V / DMX Channel 1 Channel 2

S

D I M

- OR - Phase Control D I M

Channel 1 (1 Ch. Only)

Total # of Orb Heads*

Driver Load 6w 10w 18w 30w eldoLED 36w 50w eldoLED 100w eldoLED

350mA 4 7 9 16 per ch, 16 total 16 per ch, 32 total 16 per ch, 64 total

Constant Current Driver Phase Control, 0-10v, DMX Dimmer

S

2 or 4 way Constant Current Splitter in-series connection

500mA 16 per ch, 16 total 16 per ch, 23 total 16 per ch, 60 total

700mA 2 4 9 per ch, 9 total 4 15 per ch, 15 total 16 per ch, 31 total

*Each Head on an EssentialLEDs Orb fixture is counted individually

Line Voltage Input (2) 20AWG - 33’ max total length Interconnect Wire 0-10v or DMX control wires EssentialLEDs Orb Fixture (shown with 2 heads)

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 83


Visual Lighting Technologies

Terms & Conditions 1. Orders: Orders for Visual Lighting Technologies (VLT) will be accepted only with a written Purchase Order. This order shall be subject to all sales, excise and other taxes. Customer is responsible for furnishing a resale certificate. Accounting terms should be agreed upon prior to order placement. Hold for ‘‘Release” purchase orders will be required to receive submittal packages. “Hold for Release” orders are subject to a 10% cancellation fee once submittals are issued. VLT has a $100 minimum order policy. RUSH orders will be charged an additional 15% processing fee. 2. Credit: All new credit accounts must sign a completed credit application form or furnish VLT with their standard credit references. Please allow three to five business days to establish credit. Unless credit is established, a pre-payment by check or wire transfer should accompany the Purchase Order. All invoices not paid within terms will accrue late fees of 1.5% per month or a portion thereof. It is expressly understood and agreed that all warranties do not become effective and are expressly contingent upon payment of all sums due and payable, including but not limited to, finance charges, transportations costs, attorneys fees, and late fees. 3. Terms: Payment terms and credit limit of approved credit customers will be determined by VLT based on business consideration, credit history, years in business, etc. VLT reserves the right to hold any orders if an account has open invoices that extend beyond payment terms or exceed approved credit limit. Standard terms are 50% Deposit and 50% on Delivery of goods. Custom orders always require a 50% deposit. New customers must provide a 50% deposit on their first order. 4. C.O.D. Orders: All C.O.D. orders may be paid by company checks if approved by VLT. A $15.00 C.O.D. fee will be added to the C.O.D. amount. 5. International Orders: All international orders must be pre-paid by wire transfer. 6. Shipping: Consult factory for current lead-time prior to order placement. All prices are F.O.B. Lake Forest, California. Collect or pre-paid and additional methods of delivery and routing shall be at the seller’s discretion. VLT reserves the right to add handling charges to any shipment. VLT does not permit “freight allowed” terms. 7. Returns: Refer to the VLT “Limited Warranty”. There is a 35% re-stocking fee on any return. Custom products, complete fiber and LED product purchases are NOT returnable. 8. Loss or Damage: All products are tested, QC reviewed, and known to be in working order before leaving VLT. All title and risk of loss pass to buyer at seller’s dock. Claims for lost or damaged products/shipments shall be made by the buyer with the transportation agent or shipping firm. Buyer must inspect equipment immediately upon receipt and report any damage to the appropriate party within 72 hours of receipt. 9. Payment of Invoices: Remit invoices to Visual Lighting Technologies, 9 Rancho Circle, Lake Forest, CA 92630 10. Prices are subject to change without notice. 11. All prices are stated in U.S. dollars. 12. VLT’s Limited Warranty is contingent upon and does not become effective until orders are fully paid. The remedy under VLT’s Limited Warranty is not available to clients and/or orders where there is an outstanding balance due and/or overdue invoice. VLT’s Limited Warranty will be provided on request.

page 84

Customer Signature:_______________________________________________________________________

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

Essential LEDs 5 Year Limited Warranty Visual Lighting Technologies (VLT) warrants its EssentialLEDs Linear and EssentialLEDs Light Panel products (not including damage to product incurred during shipment or transportation; see also VLT Terms and Conditions) as follows: LED Products: VLT guarantees that all EssentialLEDs products sold by VLT will be free from defects in material or workmanship for a period of five (5) years from the date of purchase subject to the Warranty Terms and Conditions detailed below. LED Drivers: VLT guarantees that all LED driver products sold by VLT will be free from defects in material or workmanship for a period of five (5) years from the date of purchase subject to the Warranty Terms and Conditions detailed below. Warranty Terms: VLT shall first attempt to repair the defective product and second replace it with the same model, or its equivalent model, at no charge, excluding any shipping charges. To obtain warranty service: 1) 2) 3) 4)

A return authorization number (RMA#) must be obtained from VLT; The product must be delivered or shipped prepaid to VLT; and Proof of purchase in the form of a bill of sale or invoice, indicating that the product is within the warranty period, must be sent to VLT to obtain warranty service. VLT shall not be liable for any incidental, direct, or indirect costs incurred in the removal or reinstallation of any product returned for repair or replacement.

Warranty Conditions: This warranty will be void if the warranted items are: 1) Used, installed and/or maintained in such a manner that is not in accordance with VLT’s specifications, recommendations, and/or procedures, including, but not limited to: a) Mishandling, such as stretching, pulling, kinking, breaking, crimping, cutting or scratching of LED; b) Any drilling of additional mounting holes or trimming of Light Panel pieces will nullify safety rating and void product warranty; c) Failure to follow installation and maintenance manuals and/or instructions provided by the manufacturer; d) Use with LED drivers other than those provided by VLT; 2) Modified or altered in any way by anyone other than VLT or VLT’s authorized agents; 3) Not made available to VLT or its authorized agent for inspection, along with all installation, maintenance and other appropriate documents, when warranty claim is made. This warranty does not include cosmetic damage, or damage to any part of the product resulting from acts of God, accident, shipping, misuse, abuse, improper storage or connection to an improper voltage supply. VLT is not responsible for merchandise damaged in transit. Apparent or concealed damages that are incurred in transit should be reported immediately to the transportation carrier and an appropriate claim filed with the carrier. Repaired or replaced products shall be subject to the terms of this Warranty and are inspected when packed for return shipment. Disclaimer of Other Warranties: This Warranty (and any repair and replacement as provided herein) is the sole and exclusive remedy of any claims relating to items purchased through VLT; and no other warranties, express or implied, are given, including warranties of merchantability or fitness for any particular purpose. VLT shall not be liable for any incidental or consequential damages for breach of any express or implied warranty on this product. VLT will not be responsible for any representation, promise or expansion of this limited warranty by any dealer, sales or manufacturing representative or distributor of the products covered by this warranty. In the event that there is any statutory expansion of the provisions of the warranty expressed herein, the item will be deemed purchased on an as-is basis as to such expansion. Except as provided in this limited warranty all items are purchased in an as-is condition. Please contact VLT to verify that you qualify for warranty repair or replacement.

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

page 85


Visual Lighting Technologies

IP Rating Description 1st Digit Protection from Solid Objects 0

No Protection

1

Protected against solid objects greater than 50 mm

2nd Digit Protection from Moisture

50 mm

0

No Protection

1

Protected against vertically dripping water

2

Protected against dripping water when tilted up to 15°

15˚

2

Protected against solid objects greater than 12 mm

12 mm

3

Protected against solid objects greater than 2.5 mm

2.5 mm

3

Protected against spraying water @ up to 60° from vertical

4

Protected against solid objects greater than 1.0 mm

1 mm

4

Protected against splashing water from all directions

5

Dust Protected

5

Protected against water jets

6

Dust Tight

6

Protected against heavy seas & streaming water

7

Protected against effects of short term immersion, 15 cm

˚

60

15 cm

m

m

8

Protected against submersion, 1 m m

page 86

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies

Notes: __________________________________________________

_______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ _______________________________________________________ page 87

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com


Visual Lighting Technologies 9 Rancho Circle Lake Forest, CA 92630 Phone 949.581.9398 Fax 949.581.2947 info@visual-lighting.com www.visual-lighting.com www.essentialleds.com www.vltled.com

MADE in USA

Scan this special code using a QR reader on your smartphone to visit our website. Stay up to date on the latest VLT products and news!

Visual Lighting Technologies • 9 Rancho Circle, Lake Forest, CA 92630 • Ph. 949.581.9398 • Fax 949.581.2947 • www.visual-lighting.com

EssentialLEDs Catalog 2013/2014  

Linear, Light Panel & Specialty

Read more
Read more
Similar to
Popular now
Just for you