Printer Suppoert Replace the ink absorber on a canon printer

Title: Replace the Ink Absorber on a Canon Printer Printer Support Team presenting “Steps by steps instructions to replace the Ink Absorber on a Canon Printer� for the users of canon printer, hope this will help you out and if you need any assistance use canon printer customer service helpline: 1 877 234 3909.

Canon printers include an ink absorber pads that soaks up excess ink from the print cartridges, avoiding smears and keeping the cartridge free of dried ink. While numerous printer manufacturer’s include pads, for example, these on their inkjet printers, Canon's is one of a kind in the way that the printer effectively screens the waste ink absorber pads and will show a error message when the pads are full with ink. While it is prescribed that the printer be sent in for service, it is conceivable to replace the ink absorber pads at home.

Step 1 Open the printer just as you would put in new ink cartridges, giving the cartridge cradle move to center of the printing unit. Unplug the printer so that the cartridges will stay in their position.

Step 2 Find the waste ink absorbers in their black rubber frame. They will probably be on the correct side of your printer, and will be located underneath the area where the ink cartridges rest when the printer is in standby mode.

Step 3

Utilize a paper napkin or other disposable and permeable material to soak up any excess ink that might be in the pads by pressing it down onto the top of the frame.

Step 4 Pull the rubber frame free from the printer, wearing gloves to keep your hands clean. Precisely evacuate the ink absorber pads or pads from the rubber frame.

Step 5 Insert new ink absorber pads immovably into the rubber frame. Replace the rubber frame in its unique position and close the printer.

Step 6 Hold down the power button, and then connect the printer back to. Keep holding the power button down until the printer starts to reset it and come on the web.

Step 6 Sit tight for the green power light to power, then press and discharge the power button once more. It ought to squint for a few seconds, and then remain lit; this will demonstrate that the printer has been reset and is prepared to print again without errors.