DS1B 2

Design studio 1B Architecture Assignment 2 - film set design @00634437

Introduction

Content Introduction Ideas/inspirtion Storyboard Final model Reflection Second floor layout Third floor layout

Page 3 Page 4 Page 6 Page 9 Page 10 Page 11 Page 12

In this module we undertaken a plan where we shared ideas and thoughts of how we wanted to approach the goal.We did this by drawing out mind maps/ideas of what could be used such as layouts of the sets in each indiviual room, in the style we wanted to do the storyboards. Either rough sketches or going into more detail as each teammate did their own ways.

INSPIRATION/IDEAS We looked up some houses that inspired us to create for the movie set and comparing it with some of the scenes that matched up with the images. Afterwards we used the images and changed/added to what was required such as coat hangers or models/architectural equipment which was included in one of the scenes.

Throughout the process it was hard gathering everyones ideas togther as everyone’s was different and creative.

So we decided on creating the house

in pairs and combining our ideas, as one worked on the building part and another on the autocad which helped us to prepare the model.

This tested our teamwork and communication skills as we were preparing to make the model. We allocated everyone a task as we split into partners one does the model and another worked on the plans to help create the model afterwards, as we did our storyboards.

STORYBOARD

FINAL MODEL This is the final model of the house we created overall, we went with a english house that has a lot of windows to modernise the structure and overall building.

For the end product we hoped it turned out better as our modelling skills are still progressing, but we were still happy with the final model as it was close to what we were envisioning for the movie set and hvainng to make it together.

First Floor Layout

Second Floor Layout

Third Floor Layout

AUTOCAD Elevations

1:50 scale

First Floor Plan

We made the floor plans for the three storeys to help us with making the house as this already gave us all the measurments. We printed out all three floor plans and stuck it to the base of where we made the model and started sticking the materials done following the lines as we used them as guides and getting the accurate measurements.

Third Floor Plan

Second Floor Plan

Content

House Design - part 2

Introduction Site analysis/documentation Precendent Studies First model idea Sketches/drawings Floor plans/section Final model Sketches/drawings Floor plans/section Reflection

Page 3 Page 4 Page 5 Page 6 Page 7 Page 9 Page 11 Page 12 Page 13 Page 18

Introduction In this part of the module we had to follow a clients request of what they wanted to consist of in their homes and carrying out their needs. Firstly all the needs of the client required were written down and focused on incorpirating it into the house whilst developing the ideas of each rooms like the music/DIY rooms.

I did this by drawings and making notes of what should be included and which floors it would be most appropriate for and easier to access as there are three floors.

SITE DOCUMENTATION In this site analysis it shows the areas of the site that are impacted such as the direction of wind/sun path and noise pollution. This picture also shows the where th site is located and the existing parts that are surrounding it like houses and trees/bushes.

The site is located in Salford, The Quays, M50 3TT, UK. In this site it shows any types of roads like pedestrians/cycle acces, major roads and greenery surrounding the site.

Precedent 1 Minas’ House / MACh Arquitetos, OURO PRETO, BRAZIL Architects: MACh Arquitetos

For this house i liked the space and how the living room was formed into one space. Like being able to access everything without any walls closing off certain areas. I liked how all the space was used and not wasted.

This idea was also used on the first floor of the house except i put some walls for closure of space, but didnt put doors in to still create that open space.

Precedent 2 Itu House BRAZIL Architect: STUDIO DLUX

In this house design i took the placement of the windows crossing over onto the next wall and used it for my house on the first floor for the dining room and meeting room.

I liked the materiality such as the white exterior and the arrangement of the kitchen next to the living room and used it to show/change the space i had created in my own design.

S K E T C H E S

first model idea This is the first model of the house design thats been created. After completing the orthographic projections whilst deciciding on the space on the inside i printed the floor plans out. This was glued inside to help with the accurate measurements for the exterior so that it was correct according to the orthographic projections.

These are the sketches of a few ideas of the house design until finding the one that i liked the most as i made three rough drafts of what the structure could of looked like leading up to the final product. I tried exploring different roofing to find the right one as the photos are shown here.

ORTHOGRAPHIC PROJECTIONS: Elevations

Left elevation

Front elevation

Right elevation

Schedule of accommedation & Floor plans

These are the floor plans for the three storey house levels which include all the measurements for the spaces included withinn the house.

Back elevation

Scale 1:200

For the two sections they’ve been drawn instead to scale 1:50. The reason for this so i could add more detail and shadings where as on autocad you cant show that better than on a drawing. This section is cut horizontally by 3.5 This is a second section thats used within and cut vertically into the building which is 4.5m in. It shows the different rooms within the three floors as it demonstrates the different spaces/furniture presented.

Final House Design

S K E T C H E S

These were some of the ideas i had come up and experimenting in my drawings as to which one would be better.

The living room was the main focus as thats were majority of the space needed to be useful according to the others rooms and flows.

Left elevation

Front elevation

Right elevation

Back elevation

ORTHOGRAPHIC PROJECTIONS: Elevations Scale of 1:100

FIRST FLOOR PLAN The first floor consists of the entrance with stairs leading up, meeting room on thee left.

The living room is in the centre with the kitchen on the left and dining room the right. So that their all centered within the living room.

Scale of 1:100

SECOND FLOOR PLAN In this floor plan theres three bedrooms, one toilet, wardrobe and a storage/utitlities room.

Scale of 1:100

THIRD FLOOR PLAN Theres only one bedroom with a toilet, music room and wardrobe room. Along with the open space for games.

Scale of 1:100

This section is 2.7m cut from the back of the house and shows the spaces within the house.

Scale of 1:100

S E C T I O N

Reflection Going from my first model i made a few changes when developing my ideas. i was focusing too much on the making the space big instead of using and utilzing it properly for the needs of the house.

I focused on making changes to the measurements of the rooms to the appropriate sizes and fixing the stairs as well as the overall building which i made smaller.

The rooms/house have been created in the way the clients requirements wanted and needs.

Which i considered and redone in the second model which i took into mind when recreating