5
Scrubber driers
T 10
Great Productivity Scrubs in difficult to reach areas
High Performance High quality and performance vacuum motor
Ergonomics, User Friendly Easy to transport
Extractable recovery tank
Robust Construction Panel control switches protected against water and humidity Technical data
T 10
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
w
w
w
.
i
p
c
g
mm mm m2 /h
250 260 900 2 (cyl) 5 3 220 - 240V 50 Hz 15 380x350x370
l l Km/h Kg mm
a
n
s
o
w
.
c
o
m
6
Scrubber driers
CT 12 Great Productivity Scrubs in difficult to reach areas
High Performance Drying system works both forward and reverse
Ergonomics, User Friendly Easy to transport
Extractable recovery tank
Low Maintenance Costs
Robust Construction Panel control switches protected against water and humidity
Brush replacement without tools
Technical data
CT 12
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
w
w
w
.
i
p
c
g
mm mm m2 /h
350 420 1300 1 (cyl) 12 13 220 - 240V 50 Hz 32 800x420x420
l l Km/h Kg mm
a
n
s
o
w
.
c
o
m
7
Scrubber driers
t 15 Great Productivity Scrubs in difficult to reach areas
High Performance Drying system works both forward and reverse
Ergonomics, User Friendly Easy to transport
Extractable solution tank
Extractable recovery tank T15
Low Maintenance Costs Brush replacement without tools
Robust Construction Panel control switches protected against water and humidity
Technical data
T 15
Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
w
w
w
.
i
p
c
g
mm mm m2 /h
375 430 1300 1 (cyl) 14 15 220 - 240V 50 Hz 35 750x445x370
l l Km/h Kg mm
a
n
s
o
w
.
c
o
m
8
Scrubber driers
GANSY 25 Great Productivity Huge solution tank capacity in minimum external space Solution control with automatic stop (Solenoid valve)
Extensive running time
Brush control with automatic delayed stop
Water reusable system
9
Scrubber driers
GANSY 25
High Performance
Ergonomics, User Friendly
Low Maintenance Costs
CFS (Center Flow System)
Great manoeuvrability thanks to an optimum weight distribution
Inlet and outlet filters for maximum solution tank protection
CWS (Constant Weight System)
Easy to transport
Brush replacement without tools
High quality and performance vacuum motor
Designed to assure minimum noise levels
Squeegee blade can be used on 4 sides before replacement
Exclusive squeegee system assures high performance at low cost
Great visibility whilst working
Front cover can be tilted
Adjustable handle bar
Squeegee assembly and blades replacement without tools
Easy to use control panel
Hoses removable without tools
Extractable solution tank
Battery removable without tools
Extractable recovery tank
Easy access to internal compartments
Battery level indicator
Many components removable without tools
On board charger can be fitted also at a later stage
Easy access to electric compartment
External battery charger plug
10
Scrubber driers
GANSY 25
Optional accessories
Robust Construction
Front bin
Rear container
Tissue roller holder
Rear waste bin
Emulsion oil squeegee blade kit
On board battery charger
Tanks and surrounding body in high density polypropylene Panel control switches protected against water and humidity Oil bath reduction gear box Squeegee system designed to absorb harsh impact
Technical Data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Lenght Width Height
mm mm m2 /h l l Km/h Kg mm mm mm
Gansy C
Gansy B
450 730 1575 1 (disc) 25 25 220V - 50 Hz 3,5 45 1090 525 950
450 730 1575 1 (disc) 25 25 12V - 80 Ah 3,5 45 1090 525 950
11
Scrubber driers
GANSY 25
Detergent delivery and delayed brush autostop The flow of detergent starts and stops according to brush operation, avoiding waste. Brush rotation stops after three seconds and starts up again when the handlebar control is pressed. Preserves the brush and the surface to be washed. Adjustable handle height.
Easy to transport Easy to transport. Weights less than 50 kg without battery. Can be stored in a small space: • Width 95 cm • Height 61 cm • Depth 55 cm Hoses, battery and other components can be removed without tools. Easy to take apart and remount.
Reusable water system
CWS (Constant Weight System)
The detergent and dirty water tanks can be removed and transported. 25 litres capacity each. Easy to fill, empty and clean. Inflow and outflow filters on the detergent tank protect the machine’s internal circuits.
Selflevelling brush with gas piston, the head floats on the floor guaranteeing maximum cleaning efficiency at all times. Cleaning strip 45 cm wide with the washing power of a brush with more than 57,000 bristles.
High performance washing and suction motor
Extensive running time Long running time at 12 V with batteries up to 95 Ah, allowing more than an hour of constant work. About four full tanks! Also available with battery charger on board.
High quality suction motor and high performance thanks to the larger internal manifold. Exclusive IPC Gansow squeegee guarantees high performance and low cost. Rear suction hose with built-in siphon. Prevents drops of water falling on the ground when the suction motor is turned off.
w
w
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
12
Scrubber driers
F 36 High Performance Solution distribution from brush center Exclusive squeegee system assures high perform ance at low cost
Ergonomics, User Friendly Easy to use control panel
Low Maintenance Costs
Robust Construction Brush head designed to absorb harsh impact
Brush replacement without tools
Squeegee assembly and blades replacement without tools
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed (traction type) Weight (net) Dimensions (LxWxH)
w
mm mm m2/h l l Km/h Kg mm
w
w
.
i
F36 C
F36 B
500 815 1500 1 (disc) 36 37 220 - 240V 50 Hz 3 (mechanical) 67,5 960x500x855
500 815 1500 1 (disc) 36 37 24V (2x12V) 3 (mechanical) 65 960x500x855
p
c
g
a
n
s
o
w
.
c
o
m
13
Scrubber driers
CT 40 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop Available also with electric powerd traction (BT version) Brush control with automatic “delayed� stop
14
Scrubber driers
CT 40
High Performance
Ergonomics, User Friendly
Low Maintenance Costs
Solution distribution from brush center
Great manoeuvrability thanks to an optimum weight distribution
Inlet and outlet filters for maximum solution tank protection
CWS (Constant Weight System)
Great visibility whilst working
AFS (Anti Foam System)
Exclusive squeegee system assures high performance at low cost
Designed to assure minimum noise levels
Brush replacement without tools
High quality and performance vacuum motor
Easy to use control panel
Squeegee blade can be used on 4 sides before replacement
Combined scrubbing-sweeping system that includes debris hopper (R version)
Battery level indicator
Squeegee assembly and blades replacement without tools
Recovery tank discharge point and hose at maximum height
Easy access to internal compartments
Solution tank can be tilted
External battery charger plug On board charger can be fitted also at a later stage
15
Scrubber driers
CT 40
Robust Construction Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
CT40 C/B 45 (*) mm mm m2/h
Cylindrical brushes version
CT40 C 50
450 500 815 815 1575 1750 1 (disc) 1 (disc) l 40 40 l 50 50 220-240V 50 Hz vers. C 220-240V 50 Hz 24V (2x12V) vers. B Km/h 3,5 (mechanical) 3,5 (mechanical) 83 vers. C Kg 83 67 vers. B mm 1230 x 516 x 960 1230 x 516 x 960
(*) The C/B versions are not equipped with solenoid valve.
CT40 C 55
CT40 B 50
CT40 B 55
CT40 BT 50
CT40 BT 55 CT40 BT 55 R
550 815 1925 1 (disc) 40 50
500 815 1750 1 (disc) 40 50
550 815 1925 1 (disc) 40 50
500 815 2250 1 (disc) 40 50
550 815 2475 1 (disc) 40 50
550 816 2475 2 (cyl.) 40 50
220-240V 50 Hz
24V (2x12V)
24V (2x12V)
24V (2x12V)
24V (2x12V)
24V (2x12V)
3,5 (mechanical)
3,5 (mechanical)
3,5 (mechanical)
4,5 (electric)
4,5 (electric)
4,5 (electric)
83
67
68,5
73
74,5
100
1230 x 516 x 962
1230 x 516 x 960
1230 x 516 x 962
1230 x 516 x 960
1230 x 516 x 962
1190 x 640 x 960
16
Scrubber driers
CT 40
Recovery
Solution
Exclusive squeegee system assures high performance at low cost
Huge tank capacity in minimum external space
Solution control with automatic stop
Incomparable drying results even on the most difficult surfaces thanks to a very unique design.
40-50 litre capacity tanks make this model very unique in its category.
Saves water and save chemicals. Solution flow stops and starts upon brush command.
Brush control with automatic delayed stop
Recovery tank can be tilted
1
2
Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor) 1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
Easy to rinse and clean thanks also to smooth internal finishes.
Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec delay) and starts upon brush command.
w
w
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
17
Scrubber driers
CT 70 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Available also with electric powerd traction (BT version) Brush control with automatic “delayed� stop
18
Scrubber driers
CT 70
High Performance
Ergonomics, User Friendly
Low Maintenance Costs
Solution distribution from brush center
Great manoeuvrability thanks to an optimum weight distribution
Inlet and outlet filters for maximum solution tank protection
CWS (Constant Weight System)
Great visibility whilst working
AFS (Anti Foam System)
Exclusive squeegee system assures high performance at low cost
Designed to assure minimum noise levels
Brush replacement without tools
High quality and performance vacuum motor
Easy to use control panel
Squeegee blade can be used on 4 sides before replacement
Combined scrubbing-sweeping system that includes debris hopper (R version)
Battery level indicator
Squeegee assembly and blades replacement without tools
Recovery tank discharge point and hose at maximum height
Easy access to internal compartments
Solution tank can be tilted
External battery charger plug On board charger can be fitted also at a later stage
19
Scrubber driers
CT 70
Robust Construction 1 brush version
Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absob harsh impact Panel control switches protected against water and humidity
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
Cylindrical brushes version
CT70 C/B 50 CT70 B55 CT70 C/B60-1 CT70 BT55 CT70 BT60-1 CT70 BT60 CT70 BT70 CT70 BT85 CT70 BT55 R 500 550 600 550 600 600 700 850 550 815 815 1010 815 1010 815 1010 1010 816 1750 1925 2100 2475 2700 2700 3150 3825 2430 1 (disc) 1 (disc) 1 (disc) 1 (disc) 1 (disc) 2 (disc) 2 (disc) 2 (disc) 2 (cyl.) l 70 70 70 70 70 70 70 70 70 l 75 75 75 75 75 75 75 75 75 220-240V - 50 Hz C vers. 220-240V - 50 HzC vers. 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) 24V (2x12V) B vers. 24V (2x12V) B vers. Km/h 3,5 (mech.) 3,5 (mech.) 3,5 (mech.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 4,5 (elect.) 86,5 B vers. 84,5 B vers. 91,5 92,5 93,7 94,5 95 100 85,5 Kg 110,5 C C vers. 108,5 C vers. mm 1215x543x960 1215x543x960 1265x645x960 1230x587x960 1265x645x960 1210x680x960 1220x748x960 1260x893x960 1190x640x960 mm mm m2/h
20
Scrubber driers
CT 70
Recovery
Solution
Exclusive squeegee system assures high performance at low cost
Huge tank capacity in minimum external space
Incomparable drying results even on the most difficult surfaces thanks to a very unique design.
70-75 litre capacity tanks make this model very unique in its category.
Solution control with automatic stop Saves water and save chemicals. Solution flow stops and starts upon brush command.
1
2
Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor) 1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.
Brush control with automatic delayed stop
Recovery tank can be tilted Easy to rinse and clean thanks also to smooth internal finishes.
Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec delay) and starts upon brush command.
2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes. w
w
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
21
Scrubber driers
CT 90 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic “delayed� stop
22
Scrubber driers
CT 90
High Performance
Ergonomics, User Friendly
Low Maintenance Costs
Solution distribution from brush center
Great manoeuvrability thanks to an optimum weight distribution
Inlet and outlet filters for maximum solution tank protection
CWS (Constant Weight System)
Great visibility whilst working
AFS (Anti Foam System)
Exclusive squeegee system assures high performance at low cost
Designed to assure minimum noise levels
Brush replacement without tools
High quality and performance vacuum motor
Easy to use control panel
Squeegee blade can be used on 4 sides before replacement
Battery level indicator
Squeegee assembly and blades replacement without tools
Recovery tank discharge point and hose at maximum height
Easy access to internal compartments
Solution tank can be tilted
External battery charger plug On board charger can be fitted also at a later stage
23
Scrubber driers
CT 90
BT60 version
Robust Construction Tanks and surrounding body in high density polyethylene Oil bath reduction gear box Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
mm mm m2/h l l Km/h Kg mm
CT90 BT60
CT90 BT70
CT90 BT85
600 816 2700 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 97,6 1328x680x1025
700 942 3150 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 98,4 1358x748x1025
850 942 3825 2 (disc) 85 90 24V (4x6V) 4,5 (electric) 104 1446x893x1025
24
Scrubber driers
CT 90
Recovery
Solution
Exclusive squeegee system assures high performance at low cost
Huge tank capacity in minimum external space
Incomparable drying results even on the most difficult surfaces thanks to a very unique design.
90-95 litre capacity tanks make this model very unique in its category.
Solution control with automatic stop Saves water and save chemicals. Solution flow stops and starts upon brush command.
1
2
Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor) 1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full.
Brush control with automatic delayed stop
Recovery tank can be tilted Easy to rinse and clean thanks also to smooth internal finishes.
Saves brush wear and protects delicate surfaces. Brush rotation stops (3 sec. delay) and starts upon brush command.
2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes. w
w
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
25
Scrubber driers
CT 100 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic “delayed� stop
High Performance
SLS (Self Levelling System) automatic brush pressure control High quality and performance vacuum motor
ED
ENT
PAT
Exclusive squeegee system assures high performance at low cost
26
Scrubber driers
CT 100
Ergonomics, User Friendly Great manoeuvrability thanks to an optimum weight distribution
Solution tank discharge hose
Great visibility whilst working
Recovery tank discharge point and hose at maximum height
Designed to assure minimum noise levels
Solution tank can be tilted
Easy to use control panel
External battery charger plug
Solution tank level indicator
On board charger can be fitted also at a later stage
Battery level indicator
27
Scrubber driers
CT 100
Robust Construction
Low Maintenance Costs Inlet and outlet filters for maximum solution tank protection
Tanks and surrounding body in high density polyethylene
AFS (Anti Foam System)
Oil bath reduction gear box
Brush replacement without tools
Brush head designed to absorb harsh impact
Squeegee blade can be used on 4 sides before replacement
Squeegee system designed to absorb harsh impact
Squeegee assembly and blades replacement without tools
Panel control switches protected against water and humidity
Easy access to internal compartments
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
mm mm m2/h l l Km/h Kg mm
CT100 BT 60
CT100 BT 70
CT100 BT 85
600 950 2700 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 162 1572x670x1075
700 950 3150 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 170 1596x744x1075
850 950 3825 2 (disc) 100 110 24V (4x6V) 4,5 (electric) 173 1641x880x1075
28
Scrubber driers
CT 100
Recovery
Solution
Solution control with automatic stop
Extensive running time
Saves water and save chemicals. Solution flow stops and starts upon brush command.
Extremely large battery compartment allows batteries of up to 320Ah/5h (5,5h running time).
SLS (Self Levelling System) Automatic brush pressure control
Exclusive squeegee system assures high performance at low cost
Recovery tank can be tilted
Constant brush pressure with immediate reaction. Avoids also excessive brush and actuator wear.
Incomparable drying results even on the most difficult surfaces thanks to a very unique design.
Huge tank capacity in minimum external space 100 - 110 litre capacity tanks make this model very unique in its category.
Patented
w
w
Easy to rinse and clean thanks also to smooth internal finishes.
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
29
Scrubber driers
CT 110 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (Large battery compartment) Brush control with automatic “delayed” stop 3 solution distribution options: • Standard • Automatic • Economy
High Performance Solution distribution from brush center Exclusive squeegee system assures high performance at low cost Pre-programmed working settings SLS (Self Levelling System) automatic brush pressure control High quality and performance vacuum motor
30
Scrubber driers
CT 110
Ergonomics, User Friendly
Low Maintenance Costs
Great manoeuvrability thanks to an optimum weight distribution
Batery level indicator
Outlet filter for maximum solution tank protection
Great visibility whilst working
Solution tank discharge hose
AFS (Anti Foam System)
Designed to assure minimum noise levels
Solution tank can be tilted
Brush replacement without tools
Designed for maximum comfort
Flashing beacon
Squeegee blade can be used on 4 sides before replacement
Easy to use control panel
External battery charger plug
Automatic squeegee lift in reverse
Automatic stop (by comand release) in working mode
On board charger can be fitted also at a later stage
Squeegee assembly and blades replacement without tools Easy access to internal compartments
Detergent tank housing (chem-dose)
Provision for on board battery charger
31
Scrubber driers
CT 110
Robust Construction Tanks and surrounding body in high density polyethylene Oil bath reduction gear box
Brush head designed to absorb harsh impact Squeegee system designed to absorb harsh impact Panel control switches protected against water and humidity
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
mm mm m2/h l l Km/h Kg mm
BT 60 version
CT110 BT 60
CT110 BT 70
CT110 BT 85
600 815 3900 2 (disc) 110 115 24 V / 280 Ah 6,5 209 1504x722x1201
700 940 4550 2 (disc) 110 115 24 V / 280 Ah 6,5 214 1504x759x1201
850 1010 5525 2 (disc) 110 115 24 V / 280 Ah 6,5 231 1504x909x1201
32
Scrubber driers
CT 110
RECOVERY
SOLUTION
Huge tank capacity in minimum external space
CHEM-DOSE SYSTEM (optional)
Maximum comfort and extreme ease of use
110-115 litre capacity tanks make this model very unique in its category
This innovative technology enables the chemical product to be kept separate from the clean water tank, improving washing and optimising detergent consumption (from 1 10% of the water used). The Chem Dose System provides three further options: • Standard: manual regulation • Automatic: the flow of solution is regulated in proportion to the speed of the machine • Economy: minimal detergent delivery
Very comfortable riding position, thanks to the possibility of adjusting the steering according to the needs of the operator. The control panel is easy and intuitive to use and programme. All devices are clearly visible and easy to reach.
Easy access to internal components
Extensive running time
- Unscrew bolt to tilt recovery tank sideways - 3 bolts to remove vacuum fan - Squeegee hose removal without tools - Rear solution tank inspection - Easy electro valve inspection - Simple to tilt entire tank body
Extremely large battery compartment allows batteries of up to 280 Ah (4,5 h running time)
(see page 44)
1
2
Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor) 1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the left LED comes on and the vacuum motor shuts down. The right LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
w
w
w
.
i
p
c
g
a
n
s
o
w
.
c
o
m
33
Scrubber driers
CT 160 Great Productivity Huge solution tank capacity in minimum external space Extensive running time (large battery compartment) Solution control with automatic stop (Solenoid valve) Brush control with automatic “delayed� stop
High Performance Pre-programmed working settings SLS (Self Levelling System) automatic brush pressure ED ENT control T A P High quality and performance vacuum motor Combined scrubbing-sweeping system that includes debris hopper (R version)
34
Scrubber driers
CT 160
Ergonomics, User Friendly
Low Maintenance Costs
Robust Construction
Great manoeuvrability thanks to an optimum weight distribution
Inlet and outlet filters for maximum solution tank protection
Tanks and surrounding body in high density polyethylene
Great visibility whilst working
AFS (Anti Foam System)
Oil bath reduction gear box
Designed to assure minimum noise levels
Brush replacement without tools
Brush head designed to absorb harsh impact
Designed for maximum comfort
Squeegee blade can be used on 4 sides before replacement
Squeegee system designed to absorb harsh impact
Easy to use control panel
Automatic squeegee lift in reverse
Panel control switches protected against water and humidity
Automatic stop (by comand release) in working mode
Squeegee assembly and blades replacement without tools
Solution tank level indicator
Easy access to internal compartments
Batery level indicator
Solution tank discharge hose
Solution tank can be tilted
Flashing beacon
35
Scrubber driers
CT 160
CT160 BT75 R Version
CT160 BT75 R Sweep Version
Technical data Scrubbing width Suction width Productivity (at max speed) Number of brushes Solution tank capacity Recovery tank capacity Power supply Max speed Weight (net) Dimensions (LxWxH)
CT160 BT 70 mm mm m2/h l l Km/h Kg mm
700 830 4550 2 (disc) 145 170 36V 6,5 273 1720x850x1360
CT160 BT 85
CT160 BT 95
850 950 1010 1100 5525 6175 2 (disc) 2 (disc) 145 145 170 170 36V 36V 6,5 6,5 290 292 1720x1010x1360 1720x1100x1360
ct160 BT 75R
CT160 BT 75 R Sweep
750 1010 4875 2 (cyl) 145 170 36V 6,5 280 1760x885x1360
750 1010 4875 2 (cyl) 145 170 36V 6,5 300 1810x1050x1360
36
Scrubber driers
CT 160
Recovery
Patented Solution
Huge tank capacity in minimum external space
Pre-programmed working settings
SLS (Self Levelling System) Automatic brush pressure control
3 independent programs allow best settings for all types of applications. Solution flow remains adjustable at any time. Each Program can be fully personalized.
145-170 litre capacity tanks make this model very unique in its category.
Constant brush pressure with immediate reaction. Avoids also excessive brush and actuator wear.
1
2
Water level control on both tanks. Maximum protection for the vacuum motor (water level sensor)
Combined scrubbing-sweeping system that includes debris hopper (R version)
1. The vacuum motor is mounted in the highest part of the machine. A sensor shuts off the vacuum motor when the dirty water tank is full. 2. When the dirty water tank is full, the right LED comes on and the vacuum motor shuts down. The left LED indicates when the detergent solution has reached the reserve and there is enough detergent left for about two minutes.
Brushes can be dismantled without tools.
w
w
w
Extensive running time Extremely large battery compartment allows batteries of up to 320 Ah (4,5 running time).
.
i
p
c
g
a
n
s
o
w
.
c
o
m