Accessoire Harley-Davidson Piece Moto Custom Update US Import

FatBook Update 2013 fourni par US Dream Import Web : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr

THE DRAG SPECIALTIES FATBOOK™ UPDATE Loaded with new products and updated information, this 2013 FatBook™ Update builds upon your 2013 FatBook™ to provide you with the premiere source for Evolution through Twin Cam parts and accessories.

Be sure to use your 2013 OldBook™ and OldBook™ Update for your Pre-Evolution and early Indian enthusiasts, as well as our All New 2013 Tire catalog and 2013 Helmet & Apparel catalog for the widest selection of tires, helmets and apparel available anywhere.

We have Tom Motzko, head of Vendor Development for Drag Specialties, to thank for the build on our 2013 cover bike. And Tank from Tuff Cycle to thank for the incredible paint. Great job one-and-all!

FROM OUR GARAGE TO YOURS SINCE 1968 www.dragspecialties.com

IMPORTANT INFORMATION RELATING TO EXHAUST PRODUCTS: DISCLAIMER: There is no warranty on exhaust pipes and mufflers with regard to any discoloration.

Discoloration (blueing) is caused by tuning characteristics, i.e. cam timing, carburetor, etc., and is not caused by defective manufacturing. See the HARDWARE, CHEMICALS & TOOLS section for products that will help prevent or remove blueing.

DISCLAIMER: Exhaust systems for OEM non-emission control system equipped motorcycles as well as slip-on mufflers that mount downstream of and which do not inhibit the proper function of emission control systems are considered legal replacement parts by the California Air Resources Board (CARB). CARB does not, however, permit the use of aftermarket exhaust systems that remove or alter OEM emission control devices unless certified by CARB, other than on racing vehicles on closed courses. More California exhaust information is available at www.arb.ca.gov/.

DISCLAIMER: Products shown may be designed, manufactured, intended and sold for use on competition vehicles that are operated only on closed course racing circuits unless otherwise noted and use of the same on public roads or lands may be a violation of local, state and/or federal laws.

DISCLAIMER: Check your applicable laws and manufacturer’s publication(s) and/or website(s) for manufacturer’s warranty, maintenance, safety, mounting and any regulatory compliance/non-compliance information.

SECTION

1

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 2313-0136 2313-0126

EXHAUST

2313-0129

FUEL/AIR SYSTEMS

MEMPHIS FATS FOR FXDF

•Features traditional American styling with a unique cutout for dual headlight •Five standard heights to choose from – 13”, 15”, 17” 19” and 21” •Four gradient translucent colors: black, ruby, blue and burnt orange, as well as clear and solar (a light bronze tint with 72% visible light transmission) •Windshield straps are polished stainless steel with billet aluminum fittings and stainless steel socket-head screws •No-tool detachable trigger-lock mounting hardware – sold separately •Made from Lucite® for excellent optics and durability •Made in the U.S.A.

ENGINE TRANSMISSION & DRIVELINE

WINDSHIELDS PART # 13” TALL 2313-0122 2313-0123 2313-0124 2313-0125 2313-0126 2313-0127 15” TALL 2313-0128 2313-0129

DESCRIPTION

SUG. RETAIL

Clear Black Ruby Blue Burnt orange Solar

$175.95 175.95 175.95 175.95 175.95 175.95

Clear Black

185.95 185.95

PART # DESCRIPTION 15” TALL (CONT) 2113-0130 Ruby 2113-0131 Blue 2113-0132 Burnt orange 2113-0133 Solar 17” TALL 2313-0134 Clear 2313-0135 Black 2313-0136 Ruby 2313-0137 Blue

SUG. RETAIL $185.95 185.95 185.95 185.95 185.95 185.95 185.95 185.95

PART # DESCRIPTION 17” TALL (CONT) 2313-0138 Burnt orange 2313-0139 Solar 19” TALL 2313-0140 Clear 2313-0141 Black 2313-0142 Ruby 2313-0143 Blue 2313-0144 Burnt orange 2313-0145 Solar

SUG. RETAIL $185.95 185.95 195.95 195.95 195.95 195.95 195.95 195.95

GASKETS & SEALS

2313-0143 PART # 21” TALL 2313-0146 2313-0147 2313-0148 2313-0149 2313-0150 2313-0151

DESCRIPTION

SUG. RETAIL

Clear Black Ruby Blue Burnt orange Solar

$206.95 206.95 206.95 206.95 206.95 206.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

MOUNTING KITS PART # FOR 08-13 FXDF 2320-0031 2320-0084

DESCRIPTION Polished Black

SUG. RETAIL $142.95 142.95

TANKS & OIL FILTERS

2320-0031 2320-0084

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

MEMPHIS FATS SIDE WINGS

FOOTRESTS & LICENSE PLATE FRAMES

•Expand comfort pocket, channeling air outward while “cleaning” the flow •Can be installed/removed with windshield intact •Santoprene pads grip the windshield but do not mar the surface •Patterned after original Memphis Fats Side Wings, but lighter and less expensive •Uses injection molded glass filled nylon clamps in place of the original billet aluminum clamps •Feature the new “Ghost” color option (a light tint with 85% visible light transmission) •Can be mounted along with Hot Wings PART # 2350-0200

DESCRIPTION Memphis Fats side wings

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $99.95

COVERS, SECURITY & GENERAL

3

SECTION

1

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE Clear

Black

Ruby

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

Yellow

Purple

Teal

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

Blue

Solar

Burnt Orange

REPLACEMENT PLASTIC FOR HARLEY-DAVIDSON® WINDSHIELDS

•Now riders can replace their OEM windshield with the size and color of their choice •Seven gradient translucent colors as well as clear and solar (a light tint with 72% visible light transmission) •Made of Lucite® for excellent optics and durability •Available in four different heights – pick a size that’s right for you •Perfect fit with OEM hardware •Holes are not drilled but rather machined to accept snap-in nylon inserts that prevent stress fractures and star cracks commonly seen around holes – an exclusive feature of Memphis Shades replacement plastic •Made in the U.S.A. NOTE: Measurements are approximate and measured center to center of holes on the outside of windshield.

TANKS & OIL FILTERS

Due to variations in OEM mounting hardware, these windshields may not fit all models; be sure to check measurements before ordering.

DASHES & GAUGES

DESCRIPTION 15” 17” 19” FOR 05-13 FLS, FLSTN, 00-13 FLSTF, FLSTFB, 06 FLST W/ NOSTALGIC DETACHABLE KING SIZE WINDSHIELD (CHECK ALL MEASUREMENTS FIRST) Clear 2310-0431 2310-0440 2310-0449 Gradient black 2310-0432 2310-0441 2310-0450 Gradient ruby 2310-0433 2310-0442 2310-0451 Gradient teal 2310-0434 2310-0443 2310-0452 Gradient purple 2310-0435 2310-0444 2310-0453 Gradient yellow 2310-0436 2310-0445 2310-0454 Gradient blue 2310-0437 2310-0446 2310-0455 Gradient burnt orange 2310-0438 2310-0447 2310-0456 Solar 2310-0439 2310-0448 2310-0457

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

4

PART # 2310-0431 2310-0432 2310-0433 2310-0434 2310-0435 2310-0436 2310-0437 2310-0438

SUG. RETAIL $101.95 101.95 101.95 101.95 101.95 101.95 101.95 101.95

PART # 2310-0439 2310-0440 2310-0441 2310-0442 2310-0443 2310-0444 2310-0445 2310-0446

SUG. RETAIL $101.95 101.95 101.95 101.95 101.95 101.95 101.95 101.95

PART # 2310-0447 2310-0448 2310-0449 2310-0450 2310-0451 2310-0452 2310-0453 2310-0454

SUG. RETAIL $101.95 101.95 106.95 106.95 106.95 106.95 106.95 106.95

PART # 2310-0455 2310-0456 2310-0457 2310-0458 2310-0459 2310-0460 2310-0461 2310-0462

All part numbers in BLUE are new for 2013.

SUG. RETAIL $106.95 106.95 106.95 111.95 111.95 111.95 111.95 111.95

PART # 2310-0463 2310-0464 2310-0465 2310-0466

21”

2310-0458 2310-0459 2310-0460 2310-0461 2310-0462 2310-0463 2310-0464 2310-0465 2310-0466 SUG. RETAIL $111.95 111.95 111.95 111.95

SECTION 2350-0201

2350-0199

HOT WING

AUDIO & COMMUNICATION

•HOT WING – CFD designed, real world tested. Boosts air up about 3” while smoothing the flow •Virtually eliminates buffeting while generating clean air; good for rider and passenger •Allows use of a shorter shieldreplacement plastic in a variety of sizes and colors available •Patterned after original BOOSTER WING (PART #2350-0139, suggested retail $119.95) but lighter, more versatile and less expensive •Uses injection molded nylon clamps instead of billet to fit Road King, Fat Boy, Heritage and Memphis Fats •Santoprene pads grip the windshield but do not mar the surface; two sizes included •Can be mounted along with SIDE WINGS •Features the “Ghost” shade (barely noticeable)

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

BULLET BOOSTER WING, LITE

•Ligher and less expensive than original •Thinner Lucite, nylon clamps •Features the “Ghost” shade (barely noticeable) DESCRIPTION Hot Wing

ENGINE SUG. RETAIL $79.95

PART # 2350-0201

DESCRIPTION Bullet Booster Wing, Lite

SUG. RETAIL $79.95

2350-0212

TRANSMISSION & DRIVELINE GASKETS & SEALS

2350-0203 2350-0213

ELECTRICAL

FAIRING/WINDSHIELD TRIM

•Machined from lightweight and high-strength 6061 T-6 aluminum •High gloss black-anodized finish or bright chrome plating •Bolt-on installation •Chrome replacement hardware included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 96-13 FLHT/FLHTC/FLHTCU/FLHX AND H-D FL TRIKE MODELS 2350-0212 Chrome $150.95 2350-0213 Black 150.95

2350-0205

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

2350-0206

CABLES 2350-0207

BRAKES TANKS & OIL FILTERS

2350-0209

DASHES & GAUGES

WINDSCREEN TRIM

•CNC laser cut from 6061-t6 aluminum •Available in five styles (Hole Shot, Scallop, Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) to choose from •Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open up the design •Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet •Made in the U.S.A.

CHROME LIGHTED BAT LASHES

•Really accents the line of your OEM Batwing fairing •Simple peel-and-stick application •Lighted lashes have white LED strips for added style; require drilling to route the wiring •Sold in pairs PART # 2040-1202

WINDSHIELDS & FAIRINGS TOURING

BOOSTER WINGS

PART # 2350-0199

1

DESCRIPTION For 96-13 FLHT, 06-13 FLHX and 09-13 FLHTCUTG/FLHXXX

SUG. RETAIL $159.95

FOR 96-13 FLHT/FLHX AND H-D FL TRIKE SUG. PART # DESCRIPTION RETAIL PART # HOLE SHOT SCALLOP 2350-0203 Contrast Cut $79.95 2350-0209 2350-0204 Chrome 79.95 2350-0210 2350-0205 Black Ops 79.95 2350-0211 MERC 2350-0206 Contrast Cut 79.95 2350-0207 Chrome 79.95 2350-0208 Black Ops 79.95

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

DESCRIPTION

SUG. RETAIL

WHEELS & AXLES

Contrast Cut Chrome Black Ops

$79.95 79.95 79.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

5

SECTION

2 0505-1272

WINDSHIELDS & FAIRINGS TOURING

0505-1283

0505-1288

AUDIO & COMMUNICATION

0505-1285

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

MAGNUMBAR® FRONT HIGHWAY BARS

•Front bars are made from 11/2” high-strength steel for long-lasting durability •Precision bent and welded for a perfect fit every time •Wide neoprene O-rings provide traction in all climates •Available in high-polish chrome or glossy black powder-coat finish

LINBAR® FRONT HIGHWAY BARS

NOTE: Not recommended for use with extended forward controls or extended floorboards.

PART # CHROME 0505-1283 0505-1282 BLACK 0505-1289 0505-1288

DESCRIPTION

SUG. RETAIL

For 00-13 FXST/FLST For 97-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes

$399.95 399.95

For 00-13 FXST/FLST For 97-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes

399.95 399.95

0505-1271

•Front bars are made from 11/4” high-strength steel for long-lasting durability •Precision bent and welded for a perfect fit every time •Neoprene O-rings provide traction in all climates •Available in a glossy black powder-coat finish U.S. Patent #D361311 NOTE: Not recommended for use with extended forward controls or extended floorboards.

PART # DESCRIPTION GLOSSY BLACK POWDER-COATED FRONT HIGHWAY BARS 0505-1272 For 93-13 FXDWG and 08-13 FXDF (w/ stock forward controls) 0505-1273 For 91-13 FXD models w/ mid-controls 0505-1285 For 98-13 FLTR

SUG. RETAIL

$369.95 369.95 369.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0505-1286

CABLES UNIBAR®

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

•Traditional OEM-style highway bars •Made from high-quality 11/4” high-tensile steel tubing •Easy installation with included hardware •Available in triple-chrome-plated and black powder-coat finish NOTE: Not recommended for use with extended forward controls or extended floorboards.

PART # CHROME 0505-1271 0505-1281

FRAMES, SUSPENSION & FENDERS

0505-1284 BLACK 0505-1274 0505-1286

FOOTRESTS & LICENSE PLATE FRAMES

0505-1287

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

6

DESCRIPTION

SUG. RETAIL

For 91-13 FXD models w/ mid-controls For 97-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes (fits w/ OEM lowers) For 86-03 XL

$199.95

For 91-13 FXD models w/ mid-controls For 97-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes (fits w/ OEM lowers) For 86-03 XL

199.95

199.95 199.95

199.95 199.95

TINTED HEADLIGHT COVER

•Lightly tinted lens cover is a direct replacement for the clear lens cover found on 98-09 FLTR models; will also fit 10-13 FLTR models by removing the stock flat black headlight surround; simple 5-minute installation •Made in the U.S.A. PART # 2001-0514

DESCRIPTION For 98-13 FLTR models

SUG. RETAIL $99.95

FAIRING MOUNT MIRRORS

0640-0651

0640-0652

•Designed specifically for H-D batwing fairings; direct replacement for original black mirrors on FLHX models •Chrome finish •Glass measures approximately 41/4” x 4” •PART #0640-0652 include additional blind spot mirrors •Includes mounting hardware •Sold in pairs PART # DESCRIPTION FOR 96-13 FLHT/FLHX/H-D TRIKE MODELS 0640-0651 W/o blind spot mirror 0640-0652 W/ blind spot mirror

All part numbers in BLUE are new for 2013.

SUG. RETAIL $84.95 89.95

SECTION

2

WINDSHIELDS & FAIRINGS TOURING CHROME-PLATED SIDE COVER SKINS

AUDIO & COMMUNICATION

•Styling inspired by the chrome oil bag found on Softail models •Brings a tasteful chrome accent to an area completely overlooked •Hell’s Foundry smoothed out the look, eliminating the horizontal character line for a cleaner appearance •Easy 10-minute installation – applies over factory side covers using supplied double-sided adhesive tape •Made in the U.S.A. PART # 0520-0932

DESCRIPTION For 97-08 FLHT, FLHR, FLHX and FLTR models

LUGGAGE

SUG. RETAIL $299.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

0520-1173

TRANSMISSION & DRIVELINE

0520-1176

SWOOP SIDE COVERS

•Swoop side covers are 3-D molded (not open on the bag side) with perfect body lines •Swoop side covers are molded composite-stretched side covers •Shape is as narrow as possible up front to avoid interfering with the rider’s legs •Direct snap-on replacement for the OEM covers •Do not require trimming, shaping, gluing or drilling for installation •Available in a smooth or scooped design •Sold in pairs PART # DESCRIPTION SMOOTH SWOOPED SIDE COVERS 0520-1173 For 09-13 FLHT/FLHR/FLTR/FLHX w/ OEM saddlebags 0520-1174 For 97-08 FLT/FLHT/FLHR/FLHX w/ OEM saddlebags 0520-1175 For 09-13 FLHT CVO models w/ CVO saddlebags

SUG. RETAIL

$699.95 699.95 699.95

0520-1175

GASKETS & SEALS

PART # DESCRIPTION SCOOPED SWOOP SIDE COVERS 0520-1176 For 09-13 FLHT/FLHR/FLTR/FLHX w/ OEM saddlebags 0520-1177 For 97-08 FLT/FLHT/FLHR/FLHX w/ OEM saddlebags 0520-1178 For 09-13 FLHT CVO models w/ CVO saddlebags

3501-0839

3501-0840

SUG. RETAIL

$699.95 699.95 699.95

3501-0841

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

3501-0843

3501-0842

3501-0844

3501-0845

TANKS & OIL FILTERS DASHES & GAUGES

3501-0846

3501-0847

3501-0848

3501-0849

BILLET SADDLEBAG EXTENSIONS

•Easy bolt-on installation to any 93-13 FL model with hard saddlebags •Available with exhaust cutouts for single or dual exhaust systems or without cutouts for “shorty” exhausts •Newly available with cutouts designed to fit the Vance and Hines Monster Oval Mufflers •Available in chrome-plated, black powder-coat or flat black finish with contrasting machined grooves or unfinished, raw aluminum •Made in the U.S.A. PART # CHROME 3501-0839 BLACK POWDER-COAT 3501-0840 3501-0841 3501-0842 3501-0843

DESCRIPTION

SUG. RETAIL

W/ cutouts for Vance and Hines Monster Oval Mufflers only

$399.95

W/ cutouts, for Vance and Hines Monster Oval Mufflers only W/ cutouts, for dual exhaust W/ cutout, for right exhaust W/o cutout

399.95 399.95 399.95 399.95

PART # FLAT BLACK 3501-0844 3501-0845 3501-0846 BARE ALUMINUM 3501-0847 3501-0848 3501-0849

All part numbers in BLUE are new for 2013.

DESCRIPTION W/ cutouts, for dual exhaust W/ cutout, for right exhaust W/o cutout W/ cutouts, for dual exhausts W/ cutout, for right exhaust W/o cutout

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SUG. RETAIL $399.95 399.95 399.95 295.95 295.95 295.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

7

SECTION

2 3501-0850

WINDSHIELDS & FAIRINGS TOURING

3501-0836

AUDIO & COMMUNICATION 3501-0817

LUGGAGE SEATS & SISSY BARS 3501-0837

3501-0851

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

3501-0838

WIREFRAME SADDLEBAG LATCH COVERS

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

3501-0852

•6061 T-6 aluminum construction •Bolt-on installation •Available in a high gloss black anodized finish, chrome plated finish or combination of both •Chrome replacement hardware included •Made in the U.S.A.

SADDLEBAG LATCH COVERS •Machined from billet aluminum •Utilize the OEM lock mechanism •Easy installation with basic tools •Sold in pairs •Made in the U.S.A.

PART # DESCRIPTION SUG. RETAIL FOR 93-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS W/HARD SADDLEBAGS 3501-0836 Smooth, chrome $157.95 3501-0837 Fluted, Contrast Cut™ 157.95 3501-0838 Fluted, chrome 157.95

PART # DESCRIPTION SUG. RETAIL FOR 93-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS W/ HARD SADDLEBAGS 3501-0850 Chrome $359.95 3501-0817 Chrome/black anodized 359.95 3501-0851 Black anodized 359.95 3501-0852 Black anodized/chrome 359.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

8

COMPLETELY HIDDEN TRAILER HITCH

•Laser-cut from high tensile strength steel, then formed and TIG welded by hand for superior fit, strength and reliability •Vertical receiver hitch features chrome tongue •Simple bolt-on installation mounts to bike at five points for superior rigidity •Once installed, the black powder-coated main hitch is virtually unseen; only removable chrome vertical receiver remains visible •Chrome hitch tongue installs quickly without tools – keep that clean look when not towing a trailer •Does not include trailer hitch ball or wiring •Made in the U.S.A. SAFETY WARNINGS: For information on the care, safety, maintenance, mounting, manufacturer’s warranty and other information, consult the motorcycle manufacturer’s and the trailer hitch manufacturer’s publication(s) and/or website(s) for complete information.

Towing can negatively affect handling, cornering, stopping and stability and may void your warranty. Towing increases the likelihood of serious injury or death. If you tow a trailer, never exceed the motorcycle manufacturer’s Gross Vehicle Weight.

PART # 3902-0144

DESCRIPTION For 09-13 FLHT/FLHR w/ or w/o filler panels

All part numbers in BLUE are new for 2013.

SUG. RETAIL $299.95

SECTION

2

WINDSHIELDS & FAIRINGS TOURING 5-PIN TRAILER WIRE HARNESS

•Works best with trailers that have a five-wire system and LED lighting •Simply unplug the taillight from the main wire harness under the seat and plug in the supplied male and female connectors •Install a matching trailer plug on the other end for a complete wiring assembly (trailer plug not included) •Harness includes five wires •Measures 30” L •If used with Universal Trailer Wiring Isolator (PART #3902-0119) and 5-to 4 wire converter (PART #3902-0134), it is recommended to use 8-pin multi-lock trailer hitch sub-harness (PART #3902-0147, sold separately) PART # 3902-0133

AUDIO & COMMUNICATION LUGGAGE

DESCRIPTION For 97-10 FXST/FLST (except SE models), 06-09 FLHX, 97-13 FLHR, 97-09 FLTR, 97-13 FLHT/FLHTC/FLHTCU/FLHTK/FLHTCSE/FLHTCUSE and 09-13 H-D Trikes

SUG. RETAIL

SEATS & SISSY BARS

$39.95

EXHAUST

3902-0148

TRAILER WIRING SUB-HARNESSES

3902-0135

3902-0147

ENGINE

•Trailer wiring sub-harness plugs into the bike’s stock wiring harness on one end, and Rivco’s own 5 to 4 wire converter or isolator on the other •Eliminates the need to cut and splice the stock wiring harness •Order the sub-harness for your bike based on your bike’s plug-in type (see chart) •All sub-harnesses require two additional parts for a complete trailer wiring harness assembly: Rivco’s 5 to 4 wire converter (PART #3902-0134) and Rivco’s Universal Trailer Wiring Isolator (PART #3902-0119) (both sold separately) •Sub-harnesses sold each PART # 3902-0147 3902-0148 3902-0135

FUEL/AIR SYSTEMS

TRANSMISSION & DRIVELINE

DESCRIPTION For 97-10 FXST/FLST (except SE models), 06-09 FLHX, 97-13 FLHR, 97-09 FLTR, 97-13 FLHT/FLHTC/FLHTCU/FLHTK/FLHTCSE/FLHTCUSE and 09-13 H-D Trikes (8-pin AMP multi-lock) For 10-13 FLHX, FLTR (6-pin Molex) For 10-13 FLHXSE, FLTRSE/FLTRUSE/FLTRXSE (8-pin Molex)

SUG. RETAIL $39.95 39.95 39.95

GASKETS & SEALS ELECTRICAL LIGHTING

UNIVERSAL TRAILER WIRING ISOLATOR

•Prevents electrical malfunctions or damage of the bike’s electronic ignition, fuel injection, ABS braking systems and other sensitive electrical components •Isolator draws power directly through the battery’s heavy-duty wiring and fuse •Isolator senses the need for power to the taillights and activates them through smaller gauge wires connected at the motorcycle taillight, allowing the motorcycle and trailer lights to be at full intensity •Isolator measures 1” x 11/2” x 3” L with peel-and-stick adhesive backing •Plug has 36” L unterminated wire leads in a loom so you can install the trailer plug of your choice (trailer plug sold separately) •Plug connections are compatible with Rivco trailer wiring sub-harnesses and Rivco 5-to-4 wire converter (sold separately) PART # 3902-0119

DESCRIPTION Universal Trailer Wiring Isolator

SUG. RETAIL $69.95

HANDLEBARS, CONTROLS & MIRRORS

5 TO 4 WIRE CONVERTER

•For use when towing a four-wire system trailer (has combined turn/brake signal bulbs) inline with an isolator •Plug-in style connectors for installation •Must be used with Universal Trailer Wiring Isolator PART #3902-0119 (sold separately) PART # 3902-0134

DESCRIPTION 5 to 4 wire converter

CABLES BRAKES

SUG. RETAIL $39.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

TRAILER WIRING HARNESS AND RELAY

•New, improved design; plug-n-play •Eliminates blown fuses caused by overload of the stock lighting or accessory circuits; relay harness utilizes inputs from the motorcycle to direct power from the battery to the appropriate trailer lighting circuit •Kits provide standard five-wire output (run, brake, left turn, right turn, ground) plus a bonus wire that can be connected to provide 12V fused power to the trailer for compartment lights or keyless entry systems •Does not include receptacle kits PART # 2120-0560

DESCRIPTION For 97-13 FLHT, 98-13 FLTR (except 09 FLTRSE, 10-12 FLTRX), 06-09 FLTRX, 97-13 FLHR, 96-10 FXST/FLST (except 08-10 FXCW/X, 10 FLSTSE ), 97-11 FXD/FXDWG (except 10-11 FXDWG)

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $89.95

COVERS, SECURITY & GENERAL

9

SECTION

3

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

SPEAKER LID KIT WITH 6” X 9” SPEAKERS

•Includes high impact ABS replacement saddlebag lids, 200 watt-2 ohm motorcycle 6” x 9” speakers, grilles, gaskets, striker plates, lid leather grommets, wire harness and required hardware •Disassembles easily for paint •Included wire harness will plug into any current Hogtunes amp or other amp •Accepts OEM aftermarket latches NOTE: Required amplifier is not included. Recommend using PART #4405-0231 or #4405-0264.

PART # 4405-0289

DESCRIPTION For 98-13 FLH/FLT models

SUG. RETAIL $589.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

SPEAKER LID KIT

•Kit includes high impact ABS replacement saddlebag lids, lid tethers, grilles, striker plates, grommets, wire harness and required hardware •Disassembles easily for paint •Include custom rubber spacers to help fit most 6” x 9” car stereo speakers (speakers sold separately) •Accepts OEM and aftermarket latches NOTE: Required amplifier and speakers are not included.

PART # 4405-0290

DESCRIPTION For 98-13 FLH/FLT models

SUG. RETAIL $399.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

10

J & M ROKKER™ 7.25” SADDLEBAG LID SPEAKER KIT

•J&M’s new XT series 7.25” drivers, with extreme high-temp voice coil, are the largest diameter speakers that can be installed into the Harley Bagger-style saddlebags, with cone volume and mass comparable to a 6” x 9” speaker •Designed specifically for the 1998-2013 Harley® Bagger saddlebags •Spec’d at 2 ohms impedance and 170+ watts max power, these new speakers provide the ultimate in bass response, extended mid/high frequency range and raw audio power •Waterproof injection-molded polycarbonate driver cone •High-flux strength but lite-weight dual-donut Neodymium magnet •High-efficiency vented voice-coil for improved cooling when operating at high volume levels for extended periods •Custom designed grillwork with high-output titanium-colored tweeter and midrange drivers, with a second set of paintable grilles also included •Saddlebag lids are finished in primer black color, ready for the custom color of your choice •Top-quality hardware, custom plug-n-play wiring harness and complete installation instructions are included PART # 4405-0287

DESCRIPTION For 98-13 FLHT, FLHR, FLHX, FLTR models w/ stock hard saddlebags

All part numbers in BLUE are new for 2013.

SUG. RETAIL $749.95

SECTION

3

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 2ND GENERATION SOUND OF CHROME™ SPEAKERS

•Updated design that rocks!

•3” main speakers with additional tweeters for full-bodied sound •Weatherproof bullet speaker housings have built-in 50W amplifier, volume control and on/off switch •Convenient swivel adjustment lets you position the speakers on any position for the best sound •Full plug-and-play wiring harness, noise purifier and standard 3.5mm jack for easy connection of an iPod®, MP3 player or other devices •Sold in pairs

LUGGAGE SEATS & SISSY BARS PART # 4405-0292

DESCRIPTION For 11/4” diameter handlebars

SUG. RETAIL $399.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

FUEL DOOR GPS/ACCESSORY MOUNT

•Adjustable bracket accepts most devices that use a cradle with four-hole AMPS pattern, RAM cradles or Küryakyn accessory pouches •Replace stock hinged fuel door •Provide a stable and easily accessible place to mount a GPS, satellite radio or other electronic device •Also accepts items that mount with a belt clip (MP3 players, cell phones) •Available in a chrome finish PART # 4402-0286

DESCRIPTION For 92-07 FLHT/FLHR/FLTR/FLHX

SUG. RETAIL $109.95

GASKETS & SEALS 4402-0286 PART # 4402-0287

ELECTRICAL DESCRIPTION For 08-13 FLHT/FLHR/FLTR/FLHX, 09-13 FLHTCUTG, 10-11 FLHXXX

SUG. RETAIL $109.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

SENA SPH10H-FM-01 HALF HELMET BLUETOOTH® STEREO HEADSET/ COMMUNICATOR/INTERCOM

•Bluetooth 3.0 •Simple ear pad design for quick installation to half helmets •Bluetooth intercom up to 700 meters (760 yards) •Four-way conference intercom •Conference phone call with intercom participant •Multipoint for two mobile phones •Built-in FM radio tuner with station scan / save function •Voice prompts •Bluetooth stereo headset for Bluetooth audio devices such as MP3 players •Bluetooth music playback control by AVRCP: Play, pause, track forward and track back •Easy operation by versatile Jog Dial •Sufficient sound level with integrated audio booster •Bluetooth handsfree for Bluetooth mobile phones •Bluetooth headset or stereo headset for Bluetooth GPS navigations •Water resistant for use in inclement weather •Crystal clear and natural sound quality •Up to seven hours talk time, eight days stand-by time •Individual volume control for each audio source •Firmware upgradeable

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES SPH10H-FM-01 KIT INCLUDES: 11111121-

Headset main unit Attachable Boom microphone Wired microphone USB power and data cable Cigarette charger Owner’s manual Battery pack Battery charger adapter

PART # 4402-0283

1221221-

Helmet speakers Speaker pads Microphone sponges Hook-and-loop pad for boom microphone Hook-and-loop pads for main unit Double-sided adhesive tape for main unit Hook-and-loop pad for battery pack

DESCRIPTION Half-helmet bluetooth headset

All part numbers in BLUE are new for 2013.

SUG. RETAIL $238.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

11

SECTION

3

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 4402-0268

TRANSMISSION & DRIVELINE GASKETS & SEALS

4402-0272

ELECTRICAL 4402-0273

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

12

SENA SMH-10R SPORTBIKE BLUETOOTH® STEREO HEADSET/ COMMUNICATOR/INTERCOM

•Bike to bike or rider to passenger communication •Bluetooth® specification v3.0 •Bluetooth Intercom up to 900 meters (980 yards) in open terrain •Ultra slim and light for sportbike helmets •Four-way conference intercom •Conference phone call with intercom participant •Multi-point for mobile phone and GPS •Voice Prompts •Bluetooth stereo headset by A2DP •Bluetooth music playback control by AVRCP: play, pause, track forward and track back •Sufficient sound level with integrated audio booster SMH-10R-01 SPORTBIKE KIT INCLUDES: •Bluetooth hands-free for Bluetooth mobile phones 1- Headset main unit •Bluetooth headset or stereo headset for Bluetooth 1- Attachable Boom microphone GPS navigations 1- Wired microphone •Water resistant for use in inclement weather 1- USB power and data cable •Crystal clear and natural sound quality •Up to eight hours talk time, seven days stand-by time 1- Cigarette charger 1- Owner’s manual •Can be used while charging on road trips 2- Battery pack •Individual volume control for each audio source 1- Battery charger adapter •Firmware upgradeable PART # DESCRIPTION BLUETOOTH HEADSET/INTERCOMS 4402-0268 Sportbike kit ACCESSORIES AND REPLACEMENT PARTS 4402-0272 Battery pack

SUG. RETAIL $218.95 21.95

4402-0274

1221221-

Large helmet speakers Speaker pads Microphone sponges Hook-and-loop pad for boom microphone Hook-and-loop pads for main unit Double-sided adhesive tape for main unit Hook-and-loop pad for battery pack

PART # DESCRIPTION ACCESSORIES AND REPLACEMENT PARTS (CONT) 4402-0273 Slim speakers 4402-0274 Supplies Kit (repl. foam and double sided tape)

All part numbers in BLUE are new for 2013.

SUG. RETAIL $24.95 6.95

SECTION

3

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 4402-0266

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

4402-0281

4402-0267

ELECTRICAL LIGHTING

SENA SMH5-FM BLUETOOTH® STEREO HEADSET/COMMUNICATOR/ INTERCOM WITH FM RADIO •Designed specifically for motorcycles •Bike to bike or rider to passenger communication •Bluetooth® specification v3.0 •Available with Boom microphones for open-face helmets or with wired microphones for full-face helmets •Bluetooth Intercom up to 700 meters (760 yards) in open terrain •Built-in FM radio tuner with station scan and save function •Multi-pair Bluetooth intercom •Voice Prompts •Bluetooth stereo headset by A2DP •Bluetooth music playback control by AVRCP: play, pause, track forward and track back •Easy operation by versatile Jog Dial •Sufficient sound level with integrated audio booster •Bluetooth handsfree for Bluetooth mobile phones •Bluetooth headset or stereo headset for Bluetooth GPS navigations •Water resistant for use in inclement weather •Crystal clear and natural sound quality •Up to seven hours talk time, six days stand-by time •Can be used while charging on road trips •Individual volume control for each audio source •Firmware upgradeable

SMH5-FM OPEN-FACE INCLUDES: 1111111112222-

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

4402-0282

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

SMH5-FM FULL-FACE KIT INCLUDES:

Headset main unit Clamp unit Attachable Boom microphone USB power and data cable Hook-and-loop surface mounting plate Hook-and-loop pad for Boom microphone Attachable Boom microphone holder Allen wrench Owner’s manual Microphone sponges Hook-and-loop pads for speakers Speaker pads Helmet speakers

111111112222-

PART # DESCRIPTION SINGLE BLUETOOTH HEADSET/INTERCOM UNIT 4402-0266 Open-face helmet kit (Boom mic) 4402-0267 Full-face helmet kit (wired mic)

SUG. RETAIL $158.95 158.95

Headset main unit Clamp unit Attachable wired microphone USB power and data cable Glued surface mounting plate Allen wrench Hook-and-loop pad for wired microphone Owner’s manual Microphone sponges Hook-and-loop pads for speakers Speaker pads Helmet speakers

PART # DESCRIPTION DUAL BLUETOOTH HEADSET/INTERCOM UNIT 4402-0281 Open-face helmet kit (Boom mic) 4402-0282 Full-face helmet kit (wired mic)

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

SUG. RETAIL $298.95 298.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

13

SECTION

4

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

ADJUSTABLE SISSY BAR MOUNTING

•Fully adjustable sissy bar mounting system goes on in seconds over any size and style sissy bar pad; once adjusted for your size pad, you never need to adjust it again •This mounting system is available on the following bags: new BR1800EX/S, new BR3400EX/S, BR1800, BR3400, EX2200, EX2200S, FTB1000/FTB1500, FTB2500/FTB3600, S2200E, SDP2500D, SDP2500DS, S2600, SDP2600, S3200DE, S3500 and S3500S

LUGGAGE 3515-0141

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

3515-0139

FTB2500/ FTB3600 SPORT SISSY BAR AND COMBO BAGS

•The latest group of motorcycle luggage from Saddlemen; the FTB line features a bold, yet sporty look with an array of vital features bundled with superb construction and class-leading value pricing •Sissy bar bag mounting is simple and quick, using Saddlemen’s adjustable backrest sleeve that conforms to the width of your sissy bar or pad, and its shape or taper •Mounting is secure, when using a Sissy bar bag or just a rack or seat, with the four hold-down straps included with each bag •FTB2500 and FTB3600 have the same knife-sharp styling and organizing 3515-0142 features as the smaller bags, but with more capacity •Mid-size side compartments easily hold extra cargo and double-up as beverage holders •Each bag includes a specialized top storage bag that clips on-and-off in seconds •Equipped with the same highly functional gull-wing style access flaps as our Sport Trunk and Rack Bag, these top bags expand your cargo capacity by a huge margin •If the weather gets wet, use the supplied high-visibility, light-reflective rain cover to protect the bag and its contents •FTB2500 dimensions: (Main bag) 16” W x 151/2” H x 101/2” D; (Top bag) 16” W x 41/2” H x 91/2” D; capacity 20 lb.

•FTB3600 dimensions: (Main bag) 20” W x 21” H x 111/2” D; (Top bag) 16” W x 41/2” H x 91/2” D; capacity 25 lb.

DESCRIPTION FTB2500 Sport Sissy bar and Combo Bag FTB3600 Sport Sissy bar and Combo Bag

PART # 3515-0141 3515-0142

SUG. RETAIL $134.95 169.95

3515-0138

FTB1000/FTB1500 SPORT SISSY BAR BAGS

•The latest group of motorcycle luggage from Saddlemen; the FTB line features a bold, yet sporty look with an array of vital features bundled with superb construction and class-leading value pricing •Sissy bar bag mounting is simple and quick, using Saddlemen’s adjustable backrest sleeve that conforms to the width of your sissy bar or pad, and its shape or taper •Mounting is secure, when using a sissy bar bag or just a rack or seat, with the four hold-down straps included with each bag •If the weather gets wet, use the supplied high-visibility, light-reflective rain cover to protect the bag and its contents •Carry your sissy bar bag with you, using the included padded backpack straps •Shaped to present a trim line on your motorcycle, but open up to hold an impressive amount of cargo for their size •The main cargo compartment flap opens fully with solid tethered sides for easy loading •Internal mesh storage compartments secure smaller items while keeping them visible so you can locate your stuff fast •Integrated, side-mount beverage holders adjust to the bottle’s size and then fold down smooth when not in use •FTB1000 dimensions: 19” W x 151/2” H x 10” D; capacity 10 lb.

•FTB1500 dimensions: 20” W x 16” H x 111/2” D; capacity 15 lb.

DESCRIPTION FTB1000 Sport Sissybar Bag FTB1500 Sport Sissybar Bag

PART # 3515-0138 3515-0139

3550-0171

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

14

SUG. RETAIL $89.95 99.95

3550-0168

FTB3300 SPORT TRUNK AND RACK BAG

•The latest group of motorcycle luggage from Saddlemen; the FTB line features a bold, yet sporty look with an array of vital features bundled with superb construction and class-leading value pricing •The trunk and rack bag mounts in moments without fuss, using rugged nylon straps and clips attached directly to the body of the bag •Brings never-before-seen style to the top of your touring bike’s trunk, trunk rack or large rear rack •Semi-rigid walls, specially contoured for style and load capacity, hold their shape regardless of your cargo •Gull-wing top flaps have perimeter zippers that open large for easy loading and unpacking •The new standard in trunk-rack bags •If the weather gets wet, use the supplied high-visibility, light-reflective rain cover to protect the bag and its contents •FTB3300 dimensions: 153/4” W x 14” H x 91/2” D; capacity 10 lb.

PART #

3515-0140

SUG. RETAIL .................. $119.95

WATERPROOF PAKS

•Feature wide heat-welds and two-stage folding opening seals •Translucent walls to easily identify packed cargo •Available with a lanyard or carrying handle •Available in a range of sizes to suit your needs DESCRIPTION LANYARD BAG 3” x 4.5” 5” x 5” HANDLE BAG 13” x 14.25” 9” x 15” 13” x 18.75”

All part numbers in BLUE are new for 2013.

PART #

SUG. RETAIL

3550-0168 3550-0169

$7.95 8.95

3550-0170 3550-0171 3550-0172

13.95 14.95 15.95

SECTION

4

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 3501-0833

3501-0832

LUGGAGE SEATS & SISSY BARS

EXTENDED OEM-STYLE SADDLEBAGS AND SADDLEBAG LIDS •Manufactured using the same material as OEM bags and lids •Stronger, easier to paint and hold their shape better •Saddlebags feature a full 4” extension with dual exhaust cut-outs •Lids are dimensionally the same as OEM •Direct bolt-on, accepts all OEM or aftermarket hardware, latches, tethers, etc.

•Great for custom applications or damage replacement •Individually boxed, ready for paint with minimal prep •Saddlebags and lids sold separately FOR 93-13 FLT, FLHT, FLHR, FLHX AND FLTR MODELS PART # DESCRIPTION SADDLEBAGS 3501-0832 Right side 3501-0833 Left side

SUG. RETAIL $349.95 349.95

EXHAUST

3501-0834

FUEL/AIR SYSTEMS

PART # SADDLEBAG LIDS 3501-0834 3501-0835

DESCRIPTION

SUG. RETAIL

Right side Left side

$129.95 129.95

ENGINE TRANSMISSION & DRIVELINE

3501-0834

GASKETS & SEALS OEM-STYLE SADDLEBAG LIDS

3501-0835

•Manufactured using the same material as OEM lids •Stronger, easier to paint and holds their shape better •Lids are dimensionally the same as OEM •Direct bolt-on; accepts all OEM or aftermarket hardware, latches, tethers, etc.

•Great for custom application or damage replacement •Individually boxed, ready for paint with minimal prep PART # 3501-0834

DESCRIPTION Right side; repl. OEM# 90756-93

SUG. RETAIL $129.95

PART # 3501-0835

ELECTRICAL LIGHTING DESCRIPTION Left side; repl. OEM# 90757-93

SUG. RETAIL $129.95

3501-0827

MOUNTING BRACKETS

CABLES

•Brackets are required to mount Hardstreet Classic, Sixer and Slimbag Saddlebags to models listed •Top-quality original equipment-grade paints and specifications are used •Mounting bracket kits feature machined aluminum brackets with a black finish; also included is a complete hardware kit for easy and quick mounting •Sold in pairs •Made in the U.S.A.

BRAKES

PART # DESCRIPTION MOUNTING BRACKET KITS FOR HARDSTREET CLASSIC, SIXER AND SLIMBAG SADDLEBAGS 3501-0827 For 00-13 FXST, FXSTB, FXSTS, FLSTN, FLSTS, FLSTF, w/ signal relocate 3501-0829 For 04-13 XL (except 883N/1200N/1200X/1200V)

SUG. RETAIL $179.95 179.95

BAGGER BUDZ SADDLEBAG BUMPERS AND PIN RETAINER KIT

DASHES & GAUGES

FOOTRESTS & LICENSE PLATE FRAMES

•Stick-on, clear polyurethane saddlebag bumpers keep paint from getting damaged after saddlebags are removed from bike •Pin retainers keep saddlebag pins and washers together, preventing them from falling to bottom of bag and getting lost •Kit includes bumpers and pin retainers for two saddlebags as well as installation instructions •For use on OEM hard and soft saddlebags •Made in the U.S.A. DESCRIPTION Bagger Budz kit (ea.)

Bagger Budz kit (5-pk.)

TANKS & OIL FILTERS

FRAMES, SUSPENSION & FENDERS

3501-0818

PART # 3501-0818 3501-0819

HANDLEBARS, CONTROLS & MIRRORS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

3501-0820 SUG. RETAIL $19.95 99.95

PART # 3501-0820

All part numbers in BLUE are new for 2013.

DESCRIPTION Bagger Budz display

SUG. RETAIL $99.95

COVERS, SECURITY & GENERAL

15

SECTION

5

FOR DR E S S E R / T OUR I N G

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

Remote heat controller

0801-0755

ROAD SOFA TRIKE SEATS

•Latest member of Saddlemen’s premier touring seat family, engineered and styled to add superb comfort and quality to a Harley-Davidson Trike model •Extra plush saddle as compared to a standard Road Sofa so it’s well suited for the extra seat time a Trike rider experiences •Specially designed seat pan mates perfectly with the shape of the 0801-0754 Trike chassis and does not interfere with the passenger grab rail •Exclusive, unique split-cushion design separates the seating surface from the lumbar support, reducing tailbone and back pressure for maximum long-range comfort •Five-level heat adjustment using remote controllers that connect easily to bike’s electrical system •Independently controlled heating elements for rider and passenger •Integrated pocket/belt clip allows controllers to be mounted wherever handy, are easy to use even with gloved hand, and can easily be tucked out of sight when not in use •Brightly colored LEDs indicate level of heat •Seat’s styling and function is unaffected by switches or wiring •SaddleGel™ in front and rear increases comfort for both driver and passenger •PART #s 0801-0754 and 0801-0756 accept H-D driver backrests •PART #s 0801-0755 and 0801-0757 include a built-in Saddlemen™ driver’s backrest; the backrest can be adjusted to the rider’s back and is removable for a sleek appearance •Supple SaddleHyde™ offers a combination of comfort, glove-soft leathery feel, weather-resistance and no-maintenance good looks •Large and comfortable passenger area prevents sliding forward while offering a thick GEL/Foam cushion for a high degree of comfort •Matching passenger backrest/Tour Pak pad cover completes the custom look; PART #0821-0771 sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 09-13 FLHTCUTG, FLHXXX MODELS 0801-0754 Standard w/ OEM backrest capability 0801-0756 Heated w/ OEM backrest capability

SUG. RETAIL $495.95 799.95

PART # DESCRIPTION FOR 09-13 FLHTCUTG, FLHXXX MODELS (CONT) 0801-0755 Standard w/ driver backrest 0801-0757 Heated w/ driver backrest

SUG. RETAIL $699.95 999.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

BOSS 2UP SEAT

CABLES

•High level of detail that blends in as well as it stands out •Black distressed vinyl construction •Shaped foam center part line adds an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A.

BRAKES

PART # FOR 08-13 FLHT/FLHR/FLHX/FLTR 0801-0749

DESCRIPTION

SUG. RETAIL

Black distressed vinyl with black perforated diamond sections triple stitched

$409.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

16

0801-0770

CARL BROUHARD DESIGN PREDATOR SEATS

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Feature Carl Brouhard cross stitch design •Low profile Predator design with a lower seating position compared to stock •Molded polyurethane foam for maximum comfort and styling •3/16” ABS thermoformed seat base for a perfect fit •Rubber bumpers and fully carpeted bottom to protect paint •Include all mounting hardware •Made in the U.S.A. NOTE: 97-07 FLHR/FLHX will fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART #2202-0070.

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLTR, FLHX MODELS (301/2” OVERALL X 11” W FRONT X 6” W REAR) 0801-0770 Cross, black stitch

SUG. RETAIL

$339.95

PART # DESCRIPTION FOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/FLHRSE) (31” OVERALL X 101/2” W FRONT X 6” W REAR) 0801-0771 Cross, black stitch

All part numbers in BLUE are new for 2013.

SUG. RETAIL

$339.95

SECTION

5

WINDSHIELDS & FAIRINGS

F OR DR E S S E R / TOUR I N G

TOURING AUDIO & COMMUNICATION 0801-0777

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS CARL BROUHARD DESIGNS LOW PROFILE EZ ON SOLO SEATS WITH FORWARD POSITIONING

ENGINE

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Seat geometry moves rider forward 2” compared to standard Low-Profile Solo; moves rider forward 1” compared to a stock Streetglide or Road Glide seat •Flexible urethane foam for maximum comfort 3 • /16” ABS thermoformed seat base with carpeted bottom to protect paint •New EZ Mount system requires no tools for taking seat on and off •Lowers rider up to 11/2” lower than stock seat, depending on model •Lower position creates better rider position with improved styling •Seat covers the two seat fender studs for a low, clean look •Include mounting hardware •Made in the U.S.A.

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART# 2202-0070.

PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT, FLHR, FLTR, FLHX (23” L OVERALL X 18” W X 13/4” H) 0801-0776 Cross, black stitch $289.95

PART # DESCRIPTION SUG. RETAIL FOR 97-07 FLHR, 06-07 FLHX (233/4” L OVERALL X 1/2” W X 11/2” H) 0801-0777 Cross, black stitch $299.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

0801-0774

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

CARL BROUHARD DESIGNS LOW PROFILE EZ ON SOLO FRONT SEATS

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Flexible urethane foam for maximum comfort •3/16” ABS thermoformed seat base with carpeted bottom and rubber bumpers to protect paint •New EZ Mount system requires no tools for taking seat on and off •Seat geometry places rider farther back and up to 11/2” lower (depending on model) than stock seat •Lower position creates better rider position with improved styling •Seat covers the two seat fender studs for a low, clean look •Include mounting hardware •Made in the U.S.A.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Seats do not accept pillion pads.

NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART# 2202-0070.

PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT, FLHR, FLTR, FLHX (23” L OVERALL X 18” W X 11/2” H) 0801-0774 Cross, black stitch $289.95

PART # DESCRIPTION FOR 97-07 FLHR, 06-07 FLHX MODELS (EXCEPT FLHRS/FLHRSE) (233/4” L OVERALL X 12” W X 11/2” H) 0801-0775 Cross, black stitch

All part numbers in BLUE are new for 2013.

SUG. RETAIL

$299.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

17

SECTION

5

WINDSHIELDS & FAIRINGS

F or Dr e s s e r / t our i n g

TOURING 0801-0772

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 0801-0778

0801-0779

FUEL/AIR SYSTEMS 0801-0772

ENGINE

0801-0772

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL 0822-0154

0822-0133

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0801-0772

0801-0772

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

18

CArL BrouHArD Cross Design soLo seAts WitH DriVer BACKrest oPtion

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Advanced clean look with optional EZ GLIDE II™ backrest capability •Flexible urethane foam for maximum comfort •3/16” ABS thermoformed seat base with carpeted bottom and rubber bumpers to protect paint •Lower rider 11/2” from stock seat •Include two polished stainless steel mounting nuts and a leather fender bib for a cleaner installation •Optional backrests feature solar-reflective leather cover and multiple detents with virtually no metal-to-metal contact for vertical and fore/aft pad adjustment •EZ Glide II™ small backrest (PART #0822-0133) measures 9” W x 51/4” H and does not include a pouch; EZ Glide II™ large backrest (PART #0822-0154) measures 10” W x 71/2” H and includes a pouch on the backside of the pad •”The Convertible” EZ Glide II large backrest (PART #0822-0157) includes a rain cover that pulls out of a pouch on the backside of the pad and covers the entire seat •Optional rear pillion pads are also available in matching styles and two sizes •Made in the U.S.A. NOTE: 97-07 FLHR/FLHX seats will also fit 97-07 FLT/FLHT/FLTR models when used with lower dash extension PART #2202-0070.

Front soLo seAts PArt # DesCriPtion sug. retAiL For 08-13 FLHt, FLHr, FLtr, FLHX (21” L X 121/2” W X 13/4” H) 0801-0772 Cross, black stitch $359.95 For 97-07 FLHr, 06-07 FLHX MoDeLs (211/2” L X 121/2” W X 13/4” H) 0801-0773 Cross, black stitch 359.95

oPtionAL PiLLion PADs PArt # DesCriPtion sug. retAiL For 97-13 FLHt, FLHr, FLtr, FLHX MoDeLs 0801-0778 Narrow cross, black stitch (12” L overall x 7” W x 13/4” H) $184.95 0801-0779 Wide cross, black stitch (121/2” L overall x 12” W x 2” H) 199.95

All part numbers in BLue are new for 2013.

SECTION

FOR DR E S S E R / T OUR I N G

5

WINDSHIELDS & FAIRINGS 0801-0767

0801-0765

TOURING 0801-0766

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

0801-0768

0801-0769

EXHAUST FUEL/AIR SYSTEMS

TRIPPER™ FASTBACK TUCK AND ROLL SEATS

•Seat design lets you ride low and still be comfortable •Detailed Tuck and Roll stitch work in the highly durable, synthetic glove leather cover •Rear seat sold separately •Made in the U.S.A.

•Super clean, custom style, cut low for the rider with good back support •Tapered in back but still offers good passenger comfort •Top covering made of the highest quality expanded vinyl with traditional Tuck and Roll style look •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 FLHT/FLTR/FLHX/FLHR (12” W FRONT, 7” REAR) 0801-0765 Tripper Fastback seat FOR 97-07 FLHR/FLHX (12” W FRONT, 7” REAR) 0801-0768 Tripper Fastback seat

ENGINE

TRIPPER™ SOLO TUCK AND ROLL FRONT AND REAR SEATS

SUG. RETAIL $359.95 359.95

PART # DESCRIPTION FOR 08-13 FLHT, FLTR, FLHX FLHR 0801-0766 Front, 11.5” W 0801-0767 Rear, 7” W FOR 97-07 FLHR, FLHX 0801-0769 Front, 12” W 0801-0767 Rear, 7” W

SUG. RETAIL

TRANSMISSION & DRIVELINE GASKETS & SEALS

$249.95 154.95 249.95 154.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

OUTCAST DADDY LONG LEGS SEAT WITH BACKREST

•A full-length seat designed for those who ride without a passenger •Removable and adjustable backrest offers extra support and a versatile look •Tapered in the back to fit bikes with a luggage rack •Deep 15” W rider area •Backrest features a 12” x 7” pad •Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate •Seat bottom carpeted to protect the fender •Made in the U.S.A.

•Designed for the taller rider who needs more room to move back •Gives the driver an extra 2” of leg room •A full-length seat designed for those who ride without a passenger •Removable backrest offers extra support and a versatile look •Tapered in the back to fit bikes with a luggage rack •Special contours give good support while allowing unrestricted movement •Deep 15” W rider seating area •Available with adjustable and removable driver backrest that features a 12” x 7” pad •Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate •Seat bottom carpeted to protect the fender •Made in the U.S.A.

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS 0801-0760 Smooth seat

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS 0801-0761 Smooth seat

OUTCAST SEAT WITH BACKREST

SUG. RETAIL $679.95

All part numbers in BLUE are new for 2013.

SUG. RETAIL $679.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

19

SECTION

5 F OR DR E S S E R / TOUR I N G

WINDSHIELDS & FAIRINGS

0801-0758

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

MAVERICK DADDY LONG LEGS SEATS WITH BACKREST

•Comfortable seat that retains a custom look •Designed for the taller rider who needs more room to move back while still giving the passenger comfort •Gives the driver an extra 2” of leg room •Special contours give good support while allowing unrestricted movement •Deep 15” W rider and 133/4” W passenger seating areas •Available with adjustable and removable driver backrest that features a 12” x 7” pad •Molded one-piece foam foundation covered with premium-grade black vinyl on a 16-gauge powder-coated steel base plate •Seat bottom carpeted to protect the fender •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS 0801-0758 Stitched seat

SUG. RETAIL $769.95

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS (CONT) 0801-0759 Smooth seat

SUG. RETAIL $699.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

DAYTONA SPORT SEAT WITH BACKREST

•Cafe styling with all-day comfort for one •Molded one-piece foam foundation covered with premium-grade black vinyl •Driver seating is 121/4” W and passenger is 11” W •Seat base plate is 16-gauge powder-coated steel •Carpeted seat bottom protects the fender •Available with adjustable and removable driver backrest that features a 12” x 7” pad •Made in the U.S.A. PART # FOR 08-13 FLHT, FLHR, FLHX, FLTR MODELS 0801-0763

DESCRIPTION

SUG. RETAIL

Smooth seat w/ driver backrest

$599.95

0801-0762

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

20

BARE BONES SOLO SEAT WITH BACKREST

•Simplistic styling brings out the true expression of your custom or stock bike •Top-grade black vinyl cover •Base plate is powder-coated steel and carpeted to protect painted surfaces •Rider seating area is 11” W •Available with adjustable and removable driver backrest that features a 12” x 7” pad •Pillion pad sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS 0801-0762 Smooth solo seat

SUG. RETAIL $479.95

PART # DESCRIPTION FOR 08-13 FLHT, FLHR, FLHX AND FLTR MODELS (CONT) 0801-0764 Pillion pad (7.75” W)

All part numbers in BLUE are new for 2013.

SUG. RETAIL $129.95

SECTION

WINDSHIELDS & FAIRINGS

F OR S OF TAI L 0802-0745 Shown with 0822-0133

0802-0744

5

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

0802-0726 Shown with 0822-0154

0802-0725

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

0802-0734 Shown with 0822-0133

0802-0733

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

ONE-PIECE SOLO STYLE SEATS WITH DRIVER BACKREST OPTION

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted) •New advanced clean appearance with an improved seating position and lower profile •Looks like two separate seats, but is actually mounted on a single seat pan •Molded flexible urethane foam for maximum comfort and styling •3/16” ABS thermoformed seat base with carpeted bottom to protect paint •Optional driver backrest sold separately PART #0822-0133 EZ Glide II™ small pad, PART #0822-0154 EZ Glide II™ large pad, PART #0822-0157 EZ Glide II™ convertible, or PART #0822-0189 Easy Glide II pillow pad •Optional Rear Seat/pillion seat are also available in matching styles and two sizes •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 06-10 FXST, 07-13 FLSTF MODELS (291/2” L X 131/2” W FRONT SEATING AREA X 81/2” W REAR SEATING AREA) 0802-0744 Smooth $409.95 0802-0745 Flame stitch 429.95 0802-07461 Pillow 369.95 FOR 00-05 FXST, 00-13 FLST (EXCEPT FXSTD, FLS, FLSTN, 07-13 FLSTF, 08-11 FLSTSB) (29” L X 131/2” W FRONT SEATING AREA X 91/2” W REAR SEATING AREA) 0802-0723 Smooth $409.95 0802-0724 Flame stitch 429.95 1 0802-0725 Pillow 369.95 0802-0726 Smooth w/ studs 429.95 0802-0727 Flame stitch w/ studs 439.95 0802-07281 Pillow w/ studs 379.95

PART # DESCRIPTION SUG. RETAIL FOR 84-99 FXST, FLST (29” L X 131/2” W FRONT SEATING AREA X 91/2” W REAR SEATING AREA) 0802-0729 Smooth $409.95 0802-0730 Flame stitch 429.95 0802-07311 Pillow 369.95 0802-0732 Smooth w/ studs 429.95 0802-0733 Flame stitch w/ studs 439.95 1 0802-0734 Pillow w/ studs 379.95 1

Leather-like vinyl in the seating area and automotive-grade vinyl on sides.

1” lighter-density foam for added comfort.

All part numbers in BLUE are new for 2013.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

21

SECTION

5

WINDSHIELDS & FAIRINGS

F OR S OF TAI L

TOURING AUDIO & COMMUNICATION

0802-0742

0802-0741

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

0802-0738

0802-0737

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0802-0722

0802-0721

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

22

“CHOPPED” ONE-PIECE SOLO STYLE SEATS

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides (unless noted) •New advanced clean appearance with improved seating position and lower profile •Molded flexible urethane foam for maximum comfort and styling •3/16” ABS thermoformed seat base with carpeted bottom to protect paint •Looks like two separate seats, but is actually mounted on a single seat pan •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 06-10 FXST, 07-13 FLSTF MODELS (291/2” L X 131/2” W FRONT SEAT AREA X 7” W REAR SEAT AREA) 0802-0741 Smooth $349.95 0802-07421 Pillow 304.95 0802-0743 Flame stitch 369.95 FOR 00-05 FXST, 00-13 FLST (EXCEPT FXSTD, FLS, FLSTN, 07-13 FLSTF, 08-11 FLSTSB) (29” L X 131/4” W FRONT SEAT AREA X 7” W REAR SEAT AREA) 0802-0735 Smooth 349.95 0802-07361 Pillow 304.95 0802-0737 Flame stitch 369.95 0802-0738 Smooth w/ studs 369.95 0802-07391 Pillow w/ studs 319.95 0802-0740 Flame stitch w/ studs 379.95

PART # DESCRIPTION SUG. RETAIL FOR 84-99 FXST, FLST (283/4” L X 131/2” W FRONT SEAT AREA X 61/2” W REAR SEAT AREA) 0802-0717 Smooth $349.95 0802-07181 Pillow 304.95 0802-0719 Flame stitch 369.95 0802-0720 Smooth w/ studs 369.95 0802-07211 Pillow w/ studs 319.95 0802-0722 Flame stitch w/ studs 379.95 1

Leather-like vinyl in the seating area and automotive-grade vinyl on sides.

1” light-density foam for added comfort.

All part numbers in BLUE are new for 2013.

SECTION

F OR S OF TAI L S

5

WINDSHIELDS & FAIRINGS

0802-0752

0802-0750

TOURING AUDIO & COMMUNICATION LUGGAGE 0802-0748

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

LARIAT SOLO SEAT AND PILLION PAD WITH BACKREST OPTION

ENGINE

•The Lariat solo seat is covered in genuine distressed brown leather so it is as close to having a true western horse saddle as you can get •Genuine cowhide is tanned and cut to produce unique leather covers; no two seats are the same •Each seat will break-in to be supple with a distinctive appearance, further enhancing the unique appeal of the free-range leather •The seat pans are engineered from Saddlemen’s award-winning Heel’s Down Renegade solo seat family so the fit is perfect •Like a Heel’s Down, each Lariat seat is specially designed to position the rider lower and forward for better control and riding comfort •Each solo saddle is low, wide and contoured to allow the rider to securely plant feet when stopped •Progressive density foam and SaddleGel™ technology eases tailbone pressure for better circulation and comfort •Each seat contains the internal hardware to accept an optional matching driver’s backrest; backrest is sold separately •Covered with the same special leather as the seats, the optional driver’s backrest adds superb lumbar support with 0822-0188 position adjustment for excellent riding comfort •The optional driver’s backrest installs in seconds without using tools (sold separately) •Matching, optional leather covered pillion pads also feature GEL to aid in passenger comfort; pillion pads are sold separately •Made in the U.S.A. PART # FOR 06-13 FLSTC 0802-0750 0802-0752 FOR 06-13 FLSTN 0802-0750 0802-0751

DESCRIPTION

SUG. RETAIL

Solo seat w/ GEL Pillion pad w/ GEL

$299.95 165.95

Solo seat w/ GEL Pillion pad w/ GEL

299.95 165.95

PART # DESCRIPTION FOR 06-10 FXST SOFTAIL AND 07-13 FLSTF 0802-0748 Solo seat w/ GEL 0802-0749 Pillion pad w/ GEL OPTIONAL BACKREST 0822-0188 Leather driver’s backrest

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING SUG. RETAIL $299.95 165.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

159.95

BRAKES 0802-0754

0802-0753

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

ENZO SOLO SEATS

WHEELS & AXLES

•High level of detail that blends in as well as it stands out •Black distressed vinyl construction •Shaped foam center part line adds an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A. PART # FOR 06-10 FXST, 07-13 FLSTF/B 0802-0753 0802-0754

DESCRIPTION

SUG. RETAIL

Black distressed vinyl with black perforated diamond sections triple stitched Black distressed vinyl with distressed brown raised detailing

All part numbers in BLUE are new for 2013.

$389.95 399.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

23

SECTION

5

F OR S OF TAI L

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

AVENGER SOLO SEAT

•High level of detail that blends in as well as it stands out •Black vinyl w/ black perforated sections •Features raised padding with a perforated cover, sewn and formed in just the right place •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A.

PART # DESCRIPTION FOR 06-10 FXST, 07-13 FLSTF/B 0802-0747 Black vinyl with black perforated sections

SUG. RETAIL $349.95

0802-0766

0802-0762

ENGINE 0802-0761

TRANSMISSION & DRIVELINE

0802-0765

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

WIDE SOLO FRONT SEATS WITH REMOVABLE BACKREST AND REAR SEATS

•Solo front seats are trimmed with a functional skirt that comes down over the frame and fender for a clean, uninterrupted look •Studded front seat is trimmed with conchos tied with leather •Steel base with support wings holds up the full width of the foam bucket •Matching rear seats feature a recess in the front of pad to accommodate the backrest •Backrest has four height adjustments from 13.5” to 15.5” above seat bucket, and the pad measures 7” high by 12” wide •Backrest is easily removed and installed without tools; folds forward for easy mounting of bike •Made in the U.S.A. PART # DESCRIPTION FOR 11-13 FXS, 12-13 FLS 0802-0761 Front, studded, 16” W 0802-0762 Rear, studded, 11.5” W

SUG. RETAIL $529.95 215.95

PART # DESCRIPTION FOR 11-13 FXS, 12-13 FLS 0802-0765 Front, vintage, 16” W 0802-0766 Rear, vintage, 11.5” W

0802-0760

SUG. RETAIL $499.95 205.95

0802-0764 0802-0759

0802-0763

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

24

WIDE SOLO FRONT AND REAR SEATS

•Wide solo Vintage seats bring out a classic look without loss of comfort •Top covering made of highest-quality expanded vinyl PART # DESCRIPTION •Built-in steel wings firmly support the entire FOR 11-13 FXS, 12-13 FLS width of the bucket 0802-0759 Front, studded, 16” W •Matching rear seats available separately 0802-0760 Rear, studded, 11.5” W •Made in the U.S.A.

SUG. RETAIL $319.95 215.95

All part numbers in BLUE are new for 2013.

PART # FOR 11-13 FXS, 0802-0763 0802-0764

DESCRIPTION 12-13 FLS (CONT) Front, vintage, 16” W Rear, vintage, 11.5” W

SUG. RETAIL $299.95 205.95

SECTION

F OR S OF TAI L S

0802-0768 0802-0767

5

WINDSHIELDS & FAIRINGS

0802-0770

0802-0769

TOURING AUDIO & COMMUNICATION LUGGAGE

0802-0772

SEATS & SISSY BARS

0802-0774

0802-0771

EXHAUST

0802-0773

WIDE TRIPPER™ SOLO FRONT AND REAR SEATS

FUEL/AIR SYSTEMS

•Seat design lets you ride low and still be comfortable •Detailed stitch work in the highly durable, synthetic glove leather cover •Matching rear seats sold separately •Made in the U.S.A.

ENGINE

PART # DESCRIPTION FOR 11-13 FXS, 12-13 FLS 0802-0767 Front, black, vintage, 13” W 0802-0768 Rear, black, vintage, 9.5” W 0802-0769 Front, black, diamond stitch, 13” W 0802-0770 Rear, black, diamond stitch, 9.5” W

SUG. RETAIL $269.95 159.95 289.95 169.95

PART # DESCRIPTION FOR 11-13 FXS, 12-13 FLS (CONT) 0802-0771 Front, brown, vintage, 13” W 0802-0772 Rear, brown, vintage, 9.5” W 0802-0773 Front, brown, diamond stitch, 13” W 0802-0774 Rear, brown, diamond stitch, 9.5” W

0802-0776

SUG. RETAIL $289.95 169.95 309.95 179.95

TRANSMISSION & DRIVELINE GASKETS & SEALS

0802-0778

ELECTRICAL 0802-0777

0802-0775

LIGHTING

TRIPPER™ TUCK AND ROLL SOLO FRONT AND REAR SEATS

HANDLEBARS, CONTROLS & MIRRORS

•Seat design lets you ride low and still be comfortable •Detailed stitch work in the highly durable, synthetic glove leather cover •Matching rear seats sold separately •Made in the U.S.A. PART # DESCRIPTION FOR 06-10 FXST, 07-13 FLSTF 0802-0775 Front, 12.5” W 0802-0776 Rear, 7.5” W

SUG. RETAIL $249.95 154.95

PART # DESCRIPTION FOR 05-13 FLSTN, 00-07 FLSTS/C AND 07-13 FLSTC 0802-0777 Front, 12” W 0802-0778 Rear, 7.5” W

0802-0756

0802-0755

SUG. RETAIL $249.95 154.95

CABLES BRAKES

0802-0757

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS 0802-0758

BARE BONES SOLO SEATS

•Simplistic styling brings out the true expression of your custom or stock bike •Top-grade black vinyl cover •Base plate is powder-coated steel and carpeted to protect painted surfaces •Up-front is for shorter riders and moves the rider forward •Rider seating is 101/2” W •Available in smooth and pleated seat styles •Pillion pads sold separately •Made in the U.S.A. PART # FOR 11-13 FXS/FLS 0802-0755 0802-0756

DESCRIPTION

SUG. RETAIL

Smooth seat Pleated seat

$239.95 279.95

PART # DESCRIPTION FOR 11-13 FXS/FLS (CONT) 0802-0757 Smooth pillion pad (7.75” W) 0802-0758 Deluxe smooth pillion pad (10.75” W)

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

SUG. RETAIL $129.95 139.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

25

SECTION

5

WINDSHIELDS & FAIRINGS

F OR DY N A G L I DE 0822-0189

TOURING 0803-0423

AUDIO & COMMUNICATION LUGGAGE

0803-0423

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

LOW-PROFILE TOURING SEAT WITH DUAL BACKREST CAPABILITIES

•New lower profile with improved seating position •Lowers rider 3/4” compared to stock seat •Molded polyurethane foam for maximum comfort and styling •3/16 ABS thermoformed seat base for a perfect fit •Rubber bumpers and fully carpeted bottom to protect paint •Driver and passenger backrest capabilities •Driver backrest can be relocated to the passenger position •EZ Glide II backrest pad does not adjust up and down •All hardware is polished and chrome plated •Pad pivots forward for ease of getting on and off motorcycle •Pouch on back of pad for storing items •Backrests sold separately •Includes all mounting hardware •Made in the U.S.A.

0822-0189

PART # DESCRIPTION FOR 06-13 FLD, FXD, FXWG (29” L X 13” W FRONT, 10” W REAR X 2” H FRONT, 13/4” H REAR) 0803-0423 Pillow-style OPTIONAL BACKREST EZ Glide II™ large pillow-style backrest (w/ pouch on back) (10” W x 71/2” H) 0822-0189

BRAKES

SUG. RETAIL $449.95 179.95

0803-0410

0803-0409

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

26

PREDATOR 2-UP SEAT

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Molded polyurethane foam for maximum comfort and styling •3/16” ABS thermoformed seat base for a perfect fit •Rubber bumpers and fully carpeted bottom to protect paint •Fits with all Drag and most H-D sissy bars •Includes all mounting hardware •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 04-05 FXD, FXDWG (29” L X 111/4” W FRONT X 71/2” W REAR X 13/4” H) 0803-0415 Smooth $311.95 0803-0416 Flame stitch 322.95

PART # DESCRIPTION SUG. RETAIL FOR 96-03 FXD, FXDWG (29” L X 111/4” W FRONT X 71/2” W REAR X 13/4” H) 0803-0409 Smooth $309.95 0803-0410 Flame stitch 319.95

All part numbers in BLUE are new for 2013.

SECTION

WINDSHIELDS & FAIRINGS

FOR DY N A G L I DE 0803-0411

TOURING

0803-0412 0803-0407

5

0803-0408

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

LOW SOLO SEATS

ENGINE

•Solar-reflective leather in the seating area and automotive-grade vinyl on sides •Newer lower profile and improved fit •Molded polyurethane foam, 3/16” ABS thermoformed seat base •Fully carpeted bottom to protect paint •Include all mounting hardware •Optional pillion pads are also available in matching styles •Made in the U.S.A. SOLO SEATS PART # DESCRIPTION FOR 04-05 FXD, FXDWG (201/2” L X 10” W) 0803-0413 Smooth 0803-0414 Flame FOR 96-03 FXD, FXDWG (201/2” L X 10” W) 0803-0407 Smooth 0803-0408 Flame

SUG. RETAIL $229.95 239.95

TRANSMISSION & DRIVELINE

OPTIONAL PILLION PADS PART # DESCRIPTION FOR 96-05 FXD, FXDWG (9” L X 6” W X 2” H) 0803-0411 Smooth 0803-0412 Flame

SUG. RETAIL $149.95 159.95

GASKETS & SEALS ELECTRICAL

229.95 239.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0803-0422

CABLES

0803-0421

BRAKES TANKS & OIL FILTERS 0803-0421 0822-0188

DASHES & GAUGES

LARIAT SOLO SEAT WITH BACKREST OPTION AND PILLION PAD

•The Lariat solo seat is covered in genuine distressed brown leather so it is as close to having a true western horse saddle as you can get •Genuine cowhide is tanned and cut to produce unique leather covers; no two seats are the same •Each seat will break-in to be supple with a distinctive appearance, further enhancing the unique appeal of the free-range leather •The seat pans are engineered from Saddlemen’s award-winning Heel’s Down Renegade solo seat family so the fit is perfect •Like a Heel’s Down, each Lariat seat is specially designed to position the rider lower and forward for better control and riding comfort •Each solo saddle is low, wide and contoured to allow the rider to securely plant feet when stopped •Progressive density foam and SaddleGel™ technology eases tailbone pressure for better circulation and comfort •Each seat contains the internal hardware to accept an optional matching driver’s backrest; backrest is sold separately •Covered with the same special leather as the seats, the optional driver’s backrest adds superb lumbar support with position adjustment for excellent riding comfort •The optional driver’s backrest installs in seconds without using tools •Matching, optional leather covered pillion pads also feature GEL to aid in passenger comfort; pillion pads are sold separately •Made in the U.S.A. PART # FOR 04-13 DYNA 0803-0421 0803-0422

DESCRIPTION MODELS (INCLUDES FXDWG AND FLD) Solo seat w/ GEL Pillion pad w/ GEL

SUG. RETAIL 299.95 165.95

PART # DESCRIPTION 04-13 DYNA MODELS (INCLUDES FXDWG AND FLD) 0822-0188 Optional matching leather driver’s backrest

All part numbers in BLUE are new for 2013.

SUG. RETAIL $159.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

27

SECTION

5

FOR DY N A G L I DE

WINDSHIELDS & FAIRINGS

0803-0420

0803-0419

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

ENZO SOLO SEATS

•High level of detail that blends in as well as it stands out •Black distressed vinyl construction •Shaped foam center part line adds an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Use PART #0820-0047 seat bracket to mount RSD Dyna solo seats to 06-13 FXDF models •Made in the U.S.A. PART # FOR 06-13 DYNA GLIDE 0803-0419 0803-0420 0820-0047

DESCRIPTION

SUG. RETAIL

Black distressed vinyl w/ raised detailing Black distressed vinyl w/ distressed brown raised detailing Seat bracket to mount RSD Dyna seats to 06-13 FXDF models

$394.95 404.95 9.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

BOSS SOLO SEAT

•High level of detail that blends in as well as it stands out •Black distressed vinyl with black perforated diamond sections •Detailed triple stitch sew lines and raised perforated diamond pattern coupled with a unique distressed vinyl add an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Use PART #0820-0047 seat bracket to mount RSD Dyna solo seats to 06-13 FXDF models •Made in the U.S.A. PART # FOR 06-13 DYNA GLIDE 0803-0418 0820-0047

DESCRIPTION

SUG. RETAIL

Black distressed vinyl w/ black perforated diamond vsections triple stitched Seat bracket to mount RSD Dyna seats to 06-13 FXDF models

$374.95 9.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

AVENGER SOLO SEAT

•High level of detail that blends in as well as it stands out •Black vinyl with black perforated sections •Features raised padding with a perforated cover, sewn and formed in just the right place •Ergonomic shape keeps rider seated firmly and comfortably PART # •Use PART #0820-0047 seat bracket FOR 06-13 DYNA GLIDE to mount RSD Dyna solo seats 0803-0417 to 06-13 FXDF models 0820-0047 •Made in the U.S.A.

COVERS, SECURITY & GENERAL

28

SUG. RETAIL

Black distressed vinyl w/ raised detailing Seat bracket to mount RSD Dyna seats to 06-13 FXDF models

$354.95 9.95

TRIPPER™ TUCK AND ROLL SOLO FRONT AND REAR SEATS

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

DESCRIPTION

0803-0424

0803-0425

•Seat design lets you ride low and still be comfortable •Detailed Tuck and Roll stitch work in the highly durable, synthetic glove leather cover •Front and rear seats sold separately •Made in the U.S.A. PART # FOR 06-13 DYNA GLIDE 0803-0424 0803-0425

All part numbers in BLUE are new for 2013.

DESCRIPTION Front seat, 11” W Rear seat, 7” W

SUG. RETAIL $249.95 154.95

SECTION

5

WINDSHIELDS & FAIRINGS

F OR XL

TOURING AUDIO & COMMUNICATION

0804-0460

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 0804-0461

TRANSMISSION & DRIVELINE

0804-0462

GASKETS & SEALS ELECTRICAL LIGHTING 0804-0463

0804-0464

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

0804-0466

0804-0465

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SPOON-STYLE SEATS

•Solar-reflective leather in the seating area and automotive-grade vinyl on the sides; patented process reduces surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •3/16” ABS thermoformed seat base for a perfect fit •Fully carpeted bottom with rubber bumpers to protect paint •Fit with all Drag and most H-D sissy bars •Include all mounting hardware •Made in the U.S.A. PART # DESCRIPTION FOR 10-13 XL (27” L X 101/2” W FRONT X 5” W REAR) 0804-0460 Smooth 0804-0461 Diamond stitch w/ black buttons 0804-0462 Classic stitch w/ black inset 0804-0463 Classic stitch w/ white inset

SUG. RETAIL $289.95 309.95 259.95 259.95

PART # DESCRIPTION FOR 10-13 XL (27” L X 101/2” W FRONT X 5” W REAR) (CONT) 0804-0464 Diamond stitch w/ white buttons 0804-0465 Flame stitch 0804-0466 Classic stitch w/ red inset

All part numbers in BLUE are new for 2013.

WHEELS & AXLES SUG. RETAIL $309.95 299.95 259.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

29

SECTION

5 F OR XL

WINDSHIELDS & FAIRINGS TOURING

0822-0188 0804-0453

AUDIO & COMMUNICATION 0804-0452

LUGGAGE SEATS & SISSY BARS

0804-0452

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

LARIAT SOLO SEAT WITH BACKREST OPTION AND PILLION PAD

•The Lariat solo seat is covered in genuine distressed brown leather so it is as close to having a true western horse saddle as you can get •Genuine cowhide is tanned and cut to produce unique leather covers; no two seats are the same •Each seat will break-in to be supple with a distinctive appearance, further enhancing the unique appeal of the free-range leather •The seat pans are engineered from Saddlemen’s award-winning Heel’s Down Renegade solo seat family so the fit is perfect •Like a Heel’s Down, each Lariat seat is specially designed to position the rider lower and forward for better control and riding comfort •Each solo saddle is low, wide and contoured to allow the rider to securely plant feet when stopped •Progressive density foam and SaddleGel™ technology eases tailbone pressure for better circulation and comfort •Each seat contains the internal hardware to accept an optional matching driver’s backrest; backrest is sold separately •Covered with the same special leather as the seats, the optional driver’s backrest adds superb lumbar support with position adjustment for excellent riding comfort •The driver’s backrest installs in seconds without using tools •Matching, optional leather covered pillion pads also feature GEL to aid in passenger comfort; pillion pads are sold separately •Made in the U.S.A.

PART # DESCRIPTION FOR 04-13 XL MODELS (STANDARD AND CUSTOM) 0804-0452 Solo seat w/ GEL 0804-0453 Pillion pad w/ GEL

SUG. RETAIL $299.95 165.95

0804-0454

PART # DESCRIPTION FOR 04-13 XL MODELS (STANDARD AND CUSTOM) 0822-0188 Optional matching leather driver’s backrest

SUG. RETAIL $159.95

0804-0455

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

30

AMERICANO CAFE SEATS

•Saddlemen’s unique take on the classic café racing seat •Marine-grade, element-resistant Saddlehyde™ covers are durable, yet supple, so you can be sure your seat lasts and lasts •Simple bolt-on installation–nothing else to buy or modify •Seating area is shaped to be comfortable making sure you can ride in style all-day-long •Progressive density foam with a GEL top layer supports the rider unlike the rock-hard seats offered by other builders •Seat and rear hump shape carefully sculpted to complement the motorcycle’s lines and fender shapes •Select a modern pattern cover or a pleated cover that is reminiscent of old school tuck n’ roll •Made in the U.S.A. PART # DESCRIPTION FOR 04-13 XL MODELS (WITH 3.3 GALLON FUEL TANK) 0804-0454 Modern, smooth 0804-0455 Classic, pleated FOR 04-13 XL MODELS (WITH 4.5 GALLON FUEL TANK) 0804-0456 Modern, smooth

SUG. RETAIL $299.95 299.95 299.95

PART # DESCRIPTION FOR 04-13 XL MODELS (WITH 4.5 GALLON FUEL TANK) (CONT) 0804-0457 Classic, pleated FOR 79-03 XL MODELS 0804-0458 Modern, smooth 0804-0459 Classic, pleated

All part numbers in BLUE are new for 2013.

SUG. RETAIL $299.95 299.95 299.95

SECTION

5

WINDSHIELDS & FAIRINGS

F OR XL

TOURING AUDIO & COMMUNICATION

0804-0450 0804-0451

LUGGAGE ENZO 2UP SEATS

SEATS & SISSY BARS

•High level of detail that blends in as well as it stands out •Black distressed vinyl adds an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A. PART # FOR 04-13 XL W/3.3 GAL TANK 0804-0450 0804-0451

DESCRIPTION

SUG. RETAIL

Black distressed vinyl with raised detailing Black distressed vinyl with distressed brown raised detailing

$439.95 449.95

EXHAUST FUEL/AIR SYSTEMS

0804-0446

0804-0445

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0804-0446

CAFE ENZO SEATS

•Ergonomic shape keeps rider seated firmly and comfortably •Black vinyl cover with black perforated section •Controlled density polyurethane foam •Base plate is marine-grade fiberglass •Features RSD steel eagle badge •Made in the U.S.A. PART # FOR 04-13 XL W/3.3 GAL TANK 0804-0445 0804-0446

DESCRIPTION Black distressed vinyl with raised detailing Black distressed vinyl with distressed brown raised detailing

CABLES BRAKES SUG. RETAIL $439.95 449.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

CAFE BOSS SEAT

WHEELS & AXLES

•High level of detail that blends in as well as it stands out •Black distressed vinyl w/ black perforated diamond sections •Detailed triple stitch sew lines and raised perforated diamond pattern coupled with a unique distressed vinyl add an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A. PART # FOR 04-13 XL W/3.3 GAL TANK 0804-0447

DESCRIPTION Black distressed vinyl with black perforated diamond sections triple stitched

All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $409.95

COVERS, SECURITY & GENERAL

31

SECTION

5

F OR XL

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

AVENGER 2UP SEAT

•High level of detail that blends in as well as it stands out •Shaped foam center part line adds an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A. PART # FOR 04-13 XL W/3.3 GAL TANK 0804-0448

DESCRIPTION

SUG. RETAIL

Black vinyl with black perforated sections

GASKETS & SEALS

$369.95

BOSS 2UP SEAT

•High level of detail that blends in as well as it stands out •Black distressed vinyl w/ black perforated diamond sections •Detailed triple stitch sew lines and raised perforated diamond pattern coupled with a unique distressed vinyl add an extra level of comfort on long rides, while keeping it classic •Ergonomic shape keeps rider seated firmly and comfortably •Made in the U.S.A.

ELECTRICAL LIGHTING

PART # DESCRIPTION FOR 04-13 XL W/3.3 GAL. TANK 0804-0449 Black distressed vinyl with black perforated diamond sections triple stitched

HANDLEBARS, CONTROLS & MIRRORS

SUG. RETAIL

$399.95

0804-0478

CABLES 0804-0476

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

32

TRIPPER™ TUCK AND ROLL FASTBACK SEAT

TRIPPER™ TUCK AND ROLL SOLO FRONT AND REAR SEATS

•Super clean, custom style and cut low for rider with good back support •Tapered in back yet still offers a good passenger comfort •Top covering made of the highest quality expanded vinyl •Made in the U.S.A.

NOTE: When installed on a 10-13 XL w/ 3.3 gallon tank, seat will leave a gap between nose of seat and tank.

NOTE: Not designed for a passenger.

PART # DESCRIPTION FOR 10-13 XL W/ 3.3/4.5 GAL. TANK 0804-0479 Fastback seat, 12” W front, 6” W rear

SUG. RETAIL

$329.95

0804-0477

•Seat design lets you ride low and still be comfortable •Detailed stitch work in the highly durable, synthetic glove leather cover •Made in the U.S.A. PART # DESCRIPTION FOR 04-13 XL W 3.3 GAL. TANK 0804-0476 Front, 11” W 0804-0478 Rear, 7” W FOR 04-13 W/ 4.5 GAL. TANK 0804-0477 Front, 11” W 0804-0478 Rear, 7” W

All part numbers in BLUE are new for 2013.

SUG. RETAIL 249.95 154.95 249.95 154.95

SECTION

F OR XL

5

WINDSHIELDS & FAIRINGS

0804-0471

TOURING

0804-0472

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS STUBS SPOILER SEATS

EXHAUST

•Café-style seats with a kicked-up tail section highlighted by speed stripes and color-contrasted pleats •Covered in the highest-grade black vinyl; double-stitched with bonded polyester thread •Powder-coated 16-gauge steel base plate is carpeted to provide a friction-free surface between the seat and fender •Rider area is 11” W •Made in the U.S.A.

0804-0473

FUEL/AIR SYSTEMS ENGINE

NOTE: Not designed for a passenger.

PART # FOR 04-06/10-13 XL 0804-0471 0804-0472 0804-0473

DESCRIPTION

SUG. RETAIL

Black Red Brown

TRANSMISSION & DRIVELINE

$349.95 349.95 349.95

0804-0469

GASKETS & SEALS

0804-0470

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

STUBS CAFÉ SEATS

•Popular café style seat with a tapered tail section, old-school accent piping and deep angled back support •Just the right amount of gap between the seat and tank •Covered in the highest-grade black vinyl; double-stitched with bonded polyester thread •Powder-coated 16-gauge steel base plate is carpeted to provide a friction-free surface between the seat and fender •Rider area is 101/2” W •Available in smooth and pleated styles •Made in the U.S.A.

CABLES BRAKES PART # FOR 04-06/10-13 XL 0804-0469 0804-0470

DESCRIPTION

SUG. RETAIL

Smooth seat Pleated seat

$279.95 289.95

DASHES & GAUGES

0804-0475

0804-0474

TANKS & OIL FILTERS

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES DAYTONA SEATS

•The canyon carving Daytona provides comfort for all-day riding •Over 20 years of refinement, this new version has a “chopped” nose section for that Bobber-style gap between the seat and tank •Steel 16-gauge base plate, carpeted to protect paint •Rider seating area is 11” W •Available in smooth and pleated seat styles •Made in the U.S.A.

PART # FOR 04-06/10-13 XL 0804-0474 0804-0475

All part numbers in BLUE are new for 2013.

DESCRIPTION

SUG. RETAIL

Smooth seat Pleated seat

$349.95 389.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

33

SECTION

5

F OR XL

WINDSHIELDS & FAIRINGS TOURING

0804-0443

0804-0482

0804-0481

0804-0444

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

0804-0483

EXHAUST FUEL/AIR SYSTEMS

0804-0480

ENGINE 0804-0442

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

BANANA SEATS

•Vacuum-formed ABS plastic pan with molded polyurethane foam padding •Hand-sewn heavy-duty black vinyl cover available in two patterns: diamond or horizontal tuck n’ roll •Uncovered seat also available to allow riders to customize to their own liking •Mount to motorcycle with laser-cut steel brackets on nose and tail •Acorn nut, fender washer and 5/16-18 hex bolt for mounting included •Measure 21” L x 8.5” W PART # FOR 86-03 XL 0804-0443 0804-0444 0804-0442

DESCRIPTION

SUG. RETAIL

Tuck n’ roll Diamond Uncovered

$174.95 174.95 119.95

HB SEATS

•Seat is designed to visually narrow late model Sportsters •Vacuum-formed ABS plastic pan with molded polyurethane foam padding •Hand-sewn heavy-duty black vinyl cover available in three patterns: smooth, diamond or horizontal tuck ‘n roll •Uncovered seat also available to allow riders to customize to their own liking •Mounts to motorcycle with laser-cut steel brackets on nose and tail •Acorn nut, fender washer and 5/16-18 hex bolt for mounting included •Seats are a direct bolt-on for 04-06 and 10-13 XL’s with stock frame and rear fender; will work on 07-09 models if ECM is relocated PART # FOR 04-06/10-13 XL 0804-0481 0804-0482 0804-0483 0804-0480

DESCRIPTION Smooth Tuck n’ roll Diamond Uncovered

SUG. RETAIL $229.95 229.95 229.95 149.95

0804-0467

CABLES 0804-0467

BRAKES 0804-0468

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

34

BURLY CAFÈ SOLO SEAT/TAIL SECTION

•Transforms a standard XL into a Café racer •Seat pan and rear cowling are constructed from fiberglass •Seat features high density foam base with a gel insert in seating area and covered with a black vinyl cover •Available in a full covered version or partially covered with paintable black gel coat •Includes mounting hardware and bracket to relocate electronics NOTE: Will require removal of fender, struts/supports from the frame.

NOTE: Will require relocation and custom mounting of taillight, turn signals, and license plate mount.

PART # FOR 86-03 XL 0804-0467 0804-0468

All part numbers in BLUE are new for 2013.

DESCRIPTION Partial cover Full cover

SUG. RETAIL $499.95 499.95

SECTION

FOR C US T OM / R I G I D 0806-0070

0806-0071

5

WINDSHIELDS & FAIRINGS 0806-0072

0806-0073

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

SMALL SPRING SOLO SEATS

•Feature solar-reflective leather in the seating area (except gator insert portion) to reduce the surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl •Feature a heavy steel contoured seat base with a black finish and high-density polyurethane molded foam •Include adjustable front seat hinge and two rear mount studs for springs; order springs separately (PART #DS-902011, 0820-0010 or 0820-0029) •1” x 3/16” welded center bar •Studs are 5/16” x 7/8” L and 6” center-to-center •Made in the U.S.A.

EXHAUST FUEL/AIR SYSTEMS

DISTRESSED LEATHER

Distressed leather color may vary. There may be light and dark color tones, lines, fine dark spots and natural scars. This leather will scuff and wear in to a unique distressed look. These are characteristics of distressed leather and are not subject to defective product for the purposes of any warranty claim.

CUSTOM APPLICATIONS PART # DESCRIPTION SMALL SPRING SOLO SEATS (14” L x 10” W) 0806-0070 8-ball w/black flame stitching 0806-0071 Dice w/ black stitching

SUG. RETAIL $159.95 159.95

PART # DESCRIPTION SMALL SPRING SOLO SEATS (14” L x 10” W) (CONT) 0806-0072 Dice w/ red stitching 0806-0073 Brown gator insert

SUG. RETAIL $159.95 139.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

SOLO SEATS

0806-0064

•Heavy-gauge stamped steel pan with gently 0806-0066 0806-0065 sloping rear kick for added support •Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte black electroplated finish •Covers are hand-stitched heavy-duty black vinyl •Foam is molded polyurethane, approximately 1” thick •Uncovered seat also available to allow riders to customize to their own liking PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (15” L x 11.5” W) 0806-0065 Tuck n’ roll $119.95

PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (15” L x 11.5” W) (CONT) 0806-0066 Diamond $119.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (15” L x 11.5” W) (CONT) 0806-0064 Uncovered $79.95

BRAKES TANKS & OIL FILTERS

0806-0067 0806-0068

SLIMLINE SEATS

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

0806-0069

•Same features and construction as Solo seats with a deeper side profile contour for bikes with steep backbones •Heavy-gauge stamped steel pan with gently sloping rear kick for added support •Stamped-in ridges on the pan increase stiffness and give the pan a clean, classic look with a matte black electroplated finish •Covers are hand-stitched heavy-duty black vinyl •Foam is molded polyurethane, approximately 1” thick •Uncovered seat also available to allow riders to customize to their own liking PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (13” L x 10” W) 0806-0068 Tuck n’ roll $119.95

DASHES & GAUGES

PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (13” L x 10” W) (CONT) 0806-0069 Smooth $119.95

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION SUG. RETAIL CUSTOM APPLICATIONS (13” L x 10” W) (CONT) 0806-0067 Uncovered $79.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

35

SECTION

5

WINDSHIELDS & FAIRINGS

0822-0192

1405-0185 0822-0193

TOURING 1405-0153

AUDIO & COMMUNICATION LUGGAGE 0822-0194 0822-0195

SEATS & SISSY BARS

1405-0155

EXHAUST FENDER SKINS

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

PASSENGER BACKREST PADS

•Matches Mustang’s split-bucket touring seats or studded-style seats •Covering made of highest-quality expanded vinyl •Includes chrome mounting screws •Fit OEM accessory sissy bar PART #s 52828-11 and 53760-11 for models listed •Made in the U.S.A. PART # DESCRIPTION FOR 11-13 FXS AND 12-13 FLS 0822-0192 Studded, 11.5” W x 9” H 0822-0193 Vintage, 11.5” W x 9” H 0822-0194 Studded, 8” W x 9” H 0822-0195 Vintage, 8” W x 9” H

SUG. RETAIL $109.95 99.95 89.95 79.95

•Feature automotivegrade vinyl or embossed gator leather centers with leather perimeters and a finished edge •Felt liner to protect paint •Include black zinc washer and screw to complete installation •Universal fit: 5/16” punch included for forward-mount hole •Hugs fender perfectly •Designed to match Drag Specialties solo seats •Will work with most OEM and accessory seats •Made in the U.S.A. PART # DESCRIPTION FOR 12-13 FLS, 11-13 FXS (13” L X 55/8” W) 1405-0184 W/ smooth automotive-grade vinyl center 1405-0185 W/ embossed gator leather center 1405-0186 W/ flame stitch automotive-grade vinyl center FOR 84-00 FXR, 86-03 XL, 11-13 XL 1200X/V (15” L X 43/4” W) 1405-0153 W/ smooth automotive-grade vinyl center 1405-0154 W/ embossed gator leather center 1405-0155 W/ flame stitch automotive-grade vinyl center

SUG. RETAIL $36.95 42.95 42.95 36.95 42.95 42.95

FRAME MOUNT SPRING SOLO SEAT MOUNT KIT

•Designed for installing Drag Specialties large and small spring solo seats •Includes all hardware with 3” chrome springs, leather frame cover and instructions for installation on designated Sportster models •Mount is black powder-coated, steel spring mount studs are stainless steel and all other hardware is zinc coated •Scissor-type springs can be used with this kit and are sold separately •Length is determined based on spring style •Seats sold separately •Made in the U.S.A. NOTE: Will fit 07-09 XL models if ECM is relocated from fender and seat area. This kit does not provide relocation instructions or materials.

NOTE: The large Drag Specialties Solo seat will not fit on XL models with 4.5 gallon fuel tank.

PART # 0820-0048

DESCRIPTION For 04-06/10-13 XL

SUG. RETAIL $119.95

FRAMES, SUSPENSION & FENDERS CAST STAINLESS-STEEL SEAT HINGE

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

36

SEAT MOUNT BRACKET FOR DYNA GLIDE

•Includes bracket and mounting hardware •Required to mount Enzo, Boss and Avenger solo seats to 08-13 FXDF models •Made in U.S.A.

PART # 0820-0047

DESCRIPTION Mount bracket

SUG. RETAIL $9.95

•Investment-cast stainless-steel seat hinge is rugged and beautiful •Raw cast chromoly bung welds to the backbone of the bike’s frame to create a hinge for mounting solo seats on custom choppers •Stainless-steel seat bracket bolts securely to the weld-on bung with a recessed shoulder bolt to form a hinge on finished assembly •Hand-polished finish PART # 0820-0046

DESCRIPTION Cast stainless-steel solo seat hinge

SUG. RETAIL $79.95

All part numbers in BLUE are new for 2013.

MACHO NEGRO SEAT HINGE

•The evolution of Biltwell’s original 4130 chromoly seat hinge •Second-generation welded seat bracket now features an even tougher investment-cast steel pivot head •Retrofits to both the original welded and newer cast hinge bung so upgrades are easy •Black electroplated finish PART # 0820-0045

DESCRIPTION Steel solo seat hinge

SUG. RETAIL $49.95

SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS V17911

1800-0240

EXHAUST

BIG SHOTS STAGGERED

FUEL/AIR SYSTEMS

•Feature the revolutionary Power Chamber™ design; a unique cross-over system that increases horsepower and torque •Armed with full-coverage 21/2” heat shields that are essentially blue-proof for long-lasting style •Like all Vance & Hines systems, these feature a superior fit and an unrivaled chrome finish •Meticulously finished chrome billet end caps •Removable baffles and all mounting hardware included •Made in the U.S.A.

ENGINE Power chamber

NOTE: Will not fit models with kickstarts.

PART # 1800-0240

DESCRIPTION For 06-11 Dyna models

SUG. RETAIL $649.95

PART # V17911

DESCRIPTION For 91-05 Dyna models

SUG. RETAIL $649.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

BIG RADIUS

•Big 21/2” full header and muffler heat shield system is virtually blue-proof •Chrome pipes feature scalloped tips for a unique look •Removable baffles and mounting hardware included •Includes flat plane mounting panel for the 12mm oxygen sensors; mounting panel positions sensor deeper into exhaust stream, providing enhanced data feedback to the ECM •Made in the U.S.A. PART # 1800-1582

DESCRIPTION For 13 FXSB/SE

CABLES BRAKES

SUG. RETAIL $704.95

TANKS & OIL FILTERS DASHES & GAUGES

MONSTER SQUARED SLIP-ON MUFFLERS

•61/4” high-volume muffler design in chrome or matte black finish with striking angled chrome billet end caps •Stereo-friendly, Monster Mufflers yield a deep rich tone that’s perfect 1801-0647 for those cross-country tours •Encased in full-coverage one-piece formed heat shields with chrome machined end caps •Sold in pairs •Made in the U.S.A.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

NOTE: Not for CVO models with Drop Skirt Saddlebags or H-D FL Trikes.

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLHR/FLTR MODELS 1801-0647 Chrome 1801-0648 Matte black

SUG. RETAIL

1801-0648

$849.95 949.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in the FatBook.

SEE PAGE 2 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

37

SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

SLANT 2-INTO-1 EXHAUST SYSTEMS

•All stainless steel construction with carbon fiber end caps available in two finishes •Works Stainless/Carbon features a brushed stainless finish •Carbon Ops version features a lightweight Gloss Carbon and Satin Black design that is dipped in the Black Ceramic for the toughest possible finish •All TIG welded with 12mm and 18mm O2 sensor bungs •Two step header pipes: 1.75” to 2.0” •Includes heat shields for rear header pipe and collector inlet; also includes exhaust port gaskets •Fiberglass and stainless steel wool baffle materials for high temperature resistance •4” muffler body is approximately 17” long •Includes mounting hardware and instructions •Optional “DB Killer” sound insert (PART #1861-0830) provides a more toned down exhaust note •Made in the U.S.A.

1800-1585

1800-1584

NOTE; Stainless steel systems will naturally discolor, this is expected and considered normal. High performance engine tuning utilizing a dynometer will likely result in severe discoloration.

PART # FOR 86-13 SOFTAIL MODELS 1800-1586 1800-1585

DESCRIPTION

SUG. RETAIL

Stainless steel Carbon Ops

$895.95 995.95

PART # DESCRIPTION FOR 06-13 DYNA MODELS (EXCEPT FLD) 1800-1584 Stainless steel 1800-1583 Carbon Ops

SUG. RETAIL $895.95 995.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

38

ROAD RAGE 2-INTO-1 SYSTEMS

1800-1590

1860-0662

•Stepped headers merge into a true reverse-cone megaphone muffler •13/4” headpipe steps up to 17/8” into the collector to increase flow and improve performance •4” muffler body with black billet end cap with machined flutes •Removable spiral-core louvered baffle included •Include mounting hardware •Available in long (24”) and short (12”) muffler lengths with chrome or black finish •Heat shields included •Made in the U.S.A. PART # FOR 13 FXSB/SE 1800-1590 1800-1592 1800-1591 1800-1593

DESCRIPTION Chrome, long meg Chrome, short meg Black, long meg Black, short meg

1800-1592 SUG. RETAIL $699.95 699.95 729.95 729.95

PART # DESCRIPTION REPLACEMENT END CAP (EA.) 1860-0662 Black billet end cap w/ black coating w/ contrasting machined flutes for all short megaphone style mufflers

SUG. RETAIL

$69.95

We recommend installing a VANCE & HINES FUELPAK with any exhaust change on fuel-injected models. See FUELPAK pages in the FatBook.

SEE PAGE 2 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

1800-1564

EXHAUST FUEL/AIR SYSTEMS ENGINE 1800-1565

TRANSMISSION & DRIVELINE GASKETS & SEALS 1800-1566

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

TRUE DUALS FOR FXS/FXST/FLS/FLST

1800-1577

BRAKES

•Features a full-diameter rear pipe for optimal flow and performance •Headpipes are covered with 220° heat shield to mask any discoloration; weigh less and sound better than double-wall pipes with the same shielding results •21/4” muffler bodies with integrated, removable, fuel-injection-friendly baffles •Unique removable longtails, which are 2” longer on the bottom than standard fishtails •Mounting brackets and hardware included •Made in the U.S.A.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

1800-1578

NOTE: Muffler bodies are measured from the bottom of the fishtail to the beginning of the muffler body, excluding the inlet.

PART # DESCRIPTION FOR 12-13 FXS/FLS/FLST MODELS 1800-1564 True Duals w/ 39” Longtail mufflers 1800-1565 True Duals w/ 33” Longtail mufflers 1800-1566 True Duals w/ 28.5” Longtail mufflers 1800-1577 True Duals w/ 23.5” Longtail mufflers 1800-1578 True Duals w/ 36” Cholo Longtail mufflers FOR 07-11 FLST/FXS/FXST MODELS 1800-1573 True Duals w/ 23.5” Longtail mufflers 1800-1574 True Duals w/ 28.5” Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95 899.95

PART # DESCRIPTION FOR 07-11 FLST/FXS/FXST MODELS (CONT) 1800-1572 True Duals w/ 39” Cholo Longtail mufflers 1800-1575 True Duals w/ 36” Mini Cholo Longtail mufflers 1800-1576 True Duals w/ 33” Longtail mufflers FOR 95-06 FLST/FXST MODELS 1800-1569 True Duals w/ 23.5” Longtail mufflers 1800-1570 True Duals w/ 28.5” Longtail mufflers 1800-1571 True Duals w/ 39” Cholo Longtail mufflers

SUG. RETAIL $899.95 899.95 899.95 899.95 899.95 899.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See the FatBook.

SEE PAGE 2 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

39

SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

TRUE DUAL CROSSOVER SYSTEMS WITH 4” MUFFLERS

•True Dual crossover system with 21/4” full coverage headpipe heat shields •Eliminates rear crossover pipe to front pipe, providing a cooler and improved ride •Designed and tuned to produce maximum horsepower, torque and awesome sound •4” dia. x 30” mufflers feature removable baffles 1800-1567 and end caps •12mm and 18mm O2 sensor ports accept OEM and aftermarket sensors •Made in the U.S.A. NOTE: 10 FLHX/FLTRX models with stock 2-into-1 systems may require additional parts to properly mount.

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX 1800-1567 Chrome w/ chrome end caps

1800-1568 SUG. RETAIL $899.95

PART # DESCRIPTION FOR 10-13 FLHT, FLTR, FLHR, FLHX (CONT) 1800-1568 Black w/ chrome end caps

SUG. RETAIL $899.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

MEGASHOTS 2:1:2 SYSTEMS

•Specifically designed for 103”-140” high-output big-bore motors (minimum Stage 4 level builds) •Massive 1.875”-2.00”-2.15” equally stepped headpipes flow through a 3” collector into dual 2.5” core FatShot-style, tunable, disc-based 4” mufflers •Pipes include 18mm and 12mm O2 sensor ports and plugs to accommodate both style sensors •Available in chrome or black ceramic finish with full-coverage 2.5” headpipe heat shields •Made in the U.S.A.

1800-1516

NOTE: 10 FLHX/FLTRX models with stock 2-into-1 systems may require additional parts to properly mount.

PART # DESCRIPTION FOR 95-13 FLHT, FLHR, FLHX, FLTR MODELS 1800-1516 Chrome

1800-1579 SUG. RETAIL $1,898.95

PART # DESCRIPTION FOR 95-13 FLHT, FLHR, FLHX, FLTR MODELS (CONT) 1800-1579 Black

SUG. RETAIL $1,898.95

HANDLEBARS, CONTROLS & MIRRORS 1801-0644

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

4” MUFFLERS FOR DRESSERS

•Chrome muffler bodies with gloss black end caps •Designed for easy installation to OEM brackets •Sold in pairs •Optional quiet baffles available separately •Made in the U.S.A. PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLTR AND FLHR MODELS 1801-0644 Straight-cut mufflers

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

40

1861-0834 SUG. RETAIL $633.95

PART # DESCRIPTION FOR 95-13 FLT/FLHT/FLHX/FLTR AND FLHR MODELS (CONT) 1861-0834 Optional quiet baffle (pair)

SUG. RETAIL $51.95

1801-0645

3” MUFFLERS FOR DRESSERS

•Chrome muffler bodies with gloss black end caps •Designed for easy installation to OEM brackets •Sold in pairs •Optional quiet baffles available separately •Made in the U.S.A.

1861-0835

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS 1801-0645 Straight-cut mufflers $439.95

PART # DESCRIPTION SUG. RETAIL FOR 95-13 FLT/FLHT/FLHX/FLTR/FLHR AND H-D FL TRIKE MODELS (CONT) 1861-0835 Optional quiet baffle (pair) $44.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See the FatBook.

SEE PAGE 2 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

SECTION

6

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION POWER TUNE SPORT EXHAUST SYSTEMS

LUGGAGE SEATS & SISSY BARS

•Bold drag pipe styling •21/2” diameter heat shields with 1800-1580 with 2200 coverage 1861-0863 end caps •Increased torque and horsepower •Pipes feature a hidden crossover for wide power band •Sensor plugs included for non-EFI applications •Removable baffles •Compatible with forward controls and mid controls •Exhaust port gaskets included •Available in chrome or black ceramic •Exhaust pipes and end caps sold as pairs •Made in the U.S.A. FOR 04-13 XL MODELS PART # DESCRIPTION SUG. RETAIL POWER TUNE SPORT EXHAUST SYSTEMS 1800-1580 Chrome $474.95 1800-1581 Black ceramic 574.95

PART # DESCRIPTION CHROME END CAPS (PR) 1861-0864 Sculpted 1861-0866 Classic straight

1800-1581 with 1861-0866 end caps 1861-0864

EXHAUST

1861-0866

ENGINE SUG. RETAIL $124.95 124.95

PART # DESCRIPTION BLACK CERAMIC END CAPS (PR) 1861-0863 Sculpted 1861-0865 Classic straight

SUG. RETAIL $124.95 124.95

•High-quality steel construction •Sold in pairs •Made in the U.S.A. PART # 1861-0836

DESCRIPTION SUG. RETAIL For Cycle Shack 2.5” slip-on mufflers PART #S MHD-134SS, 1801-0214, 1801-0215, MHD-138-SS, 1801-0218, 1801-0219, MS-129, 1801-0284, 1801-0287, 1801-0009, MXL-134SSA $49.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BUILDER’S EXHAUST KIT

QUIET BAFFLES FOR 21/2” SLIP-ON MUFFLERS

FUEL/AIR SYSTEMS

•Kit includes a selection of prefabbed 1.75” O.D., 16-gauge rolled steel tubing, header flanges and exhaust tips that puts the art of custom exhaust building in the hands of backyard fabricators •Each kit includes; two 16” long straight sections, two 3.5” radius U-bends with straights, two 5” radius U-bends with straights, two each of Evolution, Shovelhead, Ironhead and STD flanges and two fishtail tips •All raw tube sections are pre-polished to make chroming after joint finishing easier PART # 1802-0270

DESCRIPTION Exhaust kit

SUG. RETAIL $164.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

EXHAUST FLANGE KIT

O2 SENSOR HARNESS EXTENSION

•Cold-rolled 16-gauge (0.060”) x 1 / ” O.D. high-tensile steel tubing with a raw finish •Each tube includes two header flanges (one on each end) •Makes building a custom exhaust system much easier PART # 1802-0271

DESCRIPTION For custom Evolution/Twin Cam applications

3 4

SUG. RETAIL

$29.95

O2 SENSOR COVER

•Chrome O2 sensor covers offer a unique, custom look •Designed to cover 12mm OEM sensors •Install easily with included hardware •Sold each •Made in the U.S.A. PART # 1861-0862

DESCRIPTION 12mm O2 sensor cover

SUG. RETAIL $34.95

•6” extension harness with easy fit connectors •Provides added slack to the rear 18mm O2 sensor harness to allow easy hook up; ideal for use on 10-13 XL models when using a competition series 2-into-1 exhaust •No cutting or splicing required •Sold each •Made in the U.S.A. PART # 1861-0827

DESCRIPTION O2 sensor harness extension

SUG. RETAIL $26.95

We recommend installing a DYNOJET POWER COMMANDER or POWER VISION with any exhaust change on fuel-injected models. See the FatBook.

SEE PAGE 2 FOR IMPORTANT INFORMATION REGARDING CERTAIN WARRANTY AND EXHAUST REGULATORY COMPLIANCE INFORMATION. All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

41

SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

POWER COMMANDER V-PTI

•Uses the same great features as the Power Commander V but are perfect for turbocharged or supercharged applications looking for precision, control and reliability •Modify your fuel curve based off a pressure (boost) table and/or temperature table •Pressure table provides 3D mapping capability based on boost vs. rpm •Temperature table provides 2D mapping capability with up to 50 points of adjustments •Comes with a Bosch 3 bar Map/Temp sensor

LUGGAGE SEATS & SISSY BARS

PART # 1020-1938

EXHAUST FUEL/AIR SYSTEMS

DESCRIPTION For 08-13 FLHT/FLHX/FLHR/FLTR

SUG. RETAIL $449.95

1020-2023

ENGINE TRANSMISSION & DRIVELINE 1020-2000

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

FUELPAK

•Available here in original version which is not legal for sale in CA •Throttle position sensor-based system simplifies the process of fuel-injection tuning •Enables you to fine-tune the fuel mixture throughout the entire rpm range with the touch of a button •Increases power and improves throttle response •Very user friendly; plugs into the existing harness on the bike •No computer or software is required; simply punch in the values provided on the V&H website •Values provided are for use with Vance & Hines exhaust systems •Fuelpak will also work with other exhaust systems (contact V&H tech support for tuning information) •Includes all necessary mounting hardware NOTE: Not legal for sale or use on pollution controlled vehicles.

NOTE: Requires the use of a high-performance air filter.

PART # LCD FUELPAK FOR 49 STATE USE 1020-2023 ORIGINAL FUELPAK FOR 49 STATE USE 1020-2000 1020-2000

DESCRIPTION For 07-13 XL

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

42

$289.95

For 08-11 FXCW/C, 08-11 FLSTSB, 09 FXSTSSE For 04-11 Dyna, 02-11 V-Rod and 09-13 XR1200 models

289.95 289.95

2101-0025

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SUG. RETAIL

0705-0031

FI-TO-CARBURETOR CONVERSION KIT

•Allows most Big Twin and XL models with Delphi EFI to be converted to a carb fuel system •Uses existing wiring harness with no modifications needed •All functions of the turn signal/security module continue to function normally •Includes required software and detailed instructions •Made in the U.S.A. NOTE: Requires the separate purchase of USB interface PART #2101-0025.

NOTE: Requires the separate purchase of a Pingel fuel injection-to-carb tank fitting kit PART #0705-0031.

PART # 1020-2033

DESCRIPTION For 01-13 Big Twin and 07-13 XL models w/ 36-pin connector (except 11-13 Softail and 12-13 Dyna)

SUG. RETAIL $544.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles; check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

SECTION

7

WINDSHIELDS & FAIRINGS TOURING

Fi2000 POWRPRO WITH CVT TECHNOLOGY

•Continuously Variable Tuning (CVT) is the key to the remarkable performance the Fi2000 PowrPro delivers •PowrPro uses electronic control technology that calculates the bike’s rate of acceleration by reading crankshaft rotation at the flywheel and changes in load just as a dynamometer measures acceleration at the rear wheel •PowrPro measures and adjusts fuel flow during acceleration to the injectors in microseconds for super-fast fuel tuning – continuously and automatically; net result: precise EFI tuning now happens in the real world in real time, nonstop, up to 80 times per second •New patented technology unlike any other system on the market •PowrPro tunes to precise air-fuel mixture to create maximum power 80 times per second (does not tune to a predetermined arbitrary AFR) •Creates that adjustment to maximum power on every squirt of the injector •It’s like having the best custom map writing, dyno operator tuning your fuel every time you crank the throttle •Tunes every gear, every roll on, every environmental change, every engine mod, lugging the engine, winding it out to redline: it reacts, verifies and adjusts when the bike is accelerating •Provides perfect acceleration fuel settings in any condition, with any exhaust system with any engine modifications •No matter what kind of new hardware you install on your bike – a new exhaust system, a freer-flowing air filter setup or even a big-bore hop-up kit with high-performance cams – PowrPro continues to analyze and tune your engine for peak performance •No external adjustments needed PART # DESCRIPTION SUG. RETAIL •No dyno needed 1020-2017 For 10-13 FLHT Police models $599.95 •No additional components needed •Does not require wide band oxygen sensors 1020-2016 For 08-09 FLHT Police models 599.95 NOTE: Not legal for operation on public highways in the state of California.

1020-1899

For 12-13 XL1200V

599.95

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

Fi2000R O2 STANDARD MODEL FUEL PROCESSORS

ELECTRICAL

•The Fi2000R O2 digital fuel processor is designed to work with all H-D exhaust systems (stock or aftermarket) equipped with oxygen sensors in place (closed-loop design) •Works much like a carburetor jet kit with adjustments similar to the air-mixture screw, the needle and clip positions and the main jet •The Fi2000R increases horsepower and torque by optimizing stock lean air/fuel mixtures (helps cool the engine temps as well) •Quick and simple installation with plug-and-ride technology with OEM-style connectors •No confusing computer downloads to install •No expensive dyno-testing required •Pre-configured from the factory for your make and model, but easy PART # to adjust should your specific application need it 1020-2019 •Improves overall rideability NOTE: Standard models not legal for operation on public highways in the state of California.

1020-2018 1020-1900

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES DESCRIPTION For 10-13 FLHT Police models For 08-09 FLHT Police models For 12-13 XL1200V

SUG. RETAIL $279.95 279.95 279.95

TANKS & OIL FILTERS

1861-0887 1861-0884

DASHES & GAUGES 1015-0125

18 MM O2 SENSORS

•Precision manufactured with a ceramic body made of stabilized zirconium dioxide, surface coated with gas-permeable platinum electrodes and a porous ceramic to help prevent erosion due to contamination and particulates in the exhaust gases •Narrow band O2 sensors available in 12.5”, 16.25” and 22.25” •Replacement Wide Band O2sensor for aftermarket ignition tuners also available; overall length is 30.25” •All sensors meet or exceed OE specifications PART # 1861-0884 1861-0885 1861-0886 1861-0887

BRAKES

DESCRIPTION Narrow band O2 sensor, 12.5” Narrow band O2 sensor, 16.25” Narrow band O2 sensor, 22.25” Wide band O2 sensor for aftermarket tuners, 30.25”

SUG. RETAIL $79.95 79.95 79.95 119.95

1015-0126

RIPPLE CV CARB TOP COVERS

•Available in CNC-machined 6061 T-6 billet aluminum that is hand polished and gloss black powder coated or in investment-cast and CNC-machined stainless with a hand polished finish •Feature the popular rippled-water-droplet look; a classic styling element PART # DESCRIPTION FOR 88-06 H-D CV40/44 CARBURETORS 1015-0125 Black powder coat aluminum 1015-0126 Polished stainless steel

SUG. RETAIL $29.95 59.95

NOTE: Some products may not be legal for sale or use on pollution controlled vehicles; check your local laws and the manufacturers’ information.

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

43

SECTION

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

Array, Black Ops™

Array, Contrast Cut™

Contrast Cut™

SEATS & SISSY BARS EXHAUST

Chrome

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

Scallop, Contrast Cut™

Black Ops™

SCALLOP/ARRAY AIR CLEANERS MAX HP AIR CLEANER

•CNC-machined aluminum backing plate •Internal rubber breather tubers to eliminate oil leakage •Internal power cone design for smooth, laminar air flow •Innovative conical design for improved knee clearance •Contrast Cut™ finish starts with a polished air cleaner that has been black anodized, then recut to open the design •Black Ops™ finish features gloss black on top of a contrasting textured black finish for outstanding durability and looks •All mounting hardware and gaskets included •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE 1010-1328 Contrast Cut $449.95 1010-1329 Chrome 449.95 1010-1330 Black Ops 449.95 FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-1322 Contrast Cut 449.95 1010-1323 Chrome 449.95 1010-1324 Black Ops 449.95 FOR 91-13 XL 1010-1325 Contrast Cut 449.95 1010-1326 Chrome 449.95 1010-1327 Black Ops 449.95

BRAKES TANKS & OIL FILTERS

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

44

•Lightweight and low profile to maximize performance •Features a proprietary K&N High Flow air filter •Features PM’s proven internal crankcase breather system •Complements cylinder angles on H-D® models •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE 1010-1338 Array, Contrast Cut $419.95 1010-1339 Array, chrome 419.95 1010-1340 Array, Black Ops 419.95 1010-1341 Scallop, Contrast Cut 419.95 1010-1342 Scallop, Platinum Cut 419.95 1010-1343 Scallop, chrome 419.95 1010-1344 Scallop, Black Ops 419.95 FOR 93-06 BIG TWIN MODELS W/ STOCK CV CARB, 01-13 SOFTAIL MODELS, 04-13 DYNA MODELS, 02-07 FLT MODELS W/ DELPHI EFI 1010-1331 Array, Contrast Cut 419.95 1010-1332 Array, chrome 419.95 1010-1333 Array, Black Ops 419.95 1010-1334 Scallop, Contrast Cut 419.95 419.95 1010-1335 Scallop, Platinum Cut 1010-1336 Scallop, chrome 419.95 1010-1337 Scallop, Black Ops 419.95 FOR 91-13 XL 1010-1345 Array, Contrast Cut 419.95 1010-1346 Array, chrome 419.95 1010-1347 Array, Black Ops 419.95 1010-1348 Scallop, Contrast Cut 419.95 1010-1349 Scallop, Platinum Cut 419.95 1010-1350 Scallop, chrome 419.95 1010-1351 Scallop, Black Ops 419.95

1015-0123

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

Scallop, chrome

1015-0124

SUPER STOCK™ STEALTH AIR CLEANER KIT

•Kit includes backing plate, filter and hardware •Built-in stinger cone directs air smoothly into the bore of the carburetor and reduces turbulence and increases flow •Optional high-flow (1” taller) filter also available, PART #1011-2766 •Made in the U.S.A. NOTE: Kit does not come with covers. Can be used with S&S Stealth air cleaner covers (sold separately).

PART # 1010-1313

DESCRIPTION For 84-92 Big Twin and 86-90 XL models, w/ Super E or G carburetor

SUG. RETAIL $129.95

THROTTLE SERVO COVER

•Simple, slim and attractive 2-piece design •Covers throttle by wire servos •Universal fit for all air cleaners •Available in chrome and black anodized finishes •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D TRIKE 1015-0123 Black anodized 1015-0124 Chrome

All part numbers in BLUE are new for 2013.

SUG. RETAIL $69.95 69.95

SECTION 1010-1315

7

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

BAK REPLACEMENT COVER

•For those wanting to alter the look of their BAK or replace a damaged cover •Does not include hardware •Smooth black finish PART # 1014-0164

LUGGAGE

DESCRIPTION BAK repl. cover

SUG. RETAIL $119.95

SEATS & SISSY BARS

BIG AIR KIT (BAK)

•Flow-bench and dyno-designed for substantially increased horsepower and torque •Features beautiful billet cover in a black powder-coated finish •Innovative styling enhances and accentuates your “V” Twin engine •Set-back, thin-line design does not interfere with rider’s leg •Slim 11/2” hi-flow reusable filter and specially designed back plate dynamically increases air flow and velocity •Maximizes overall performance and fuel efficiency •Easily supports engines producing over 120 HP •Complete with breather kit, mounting hardware and micron-fabric raincoat for wet-weather riding •Easy-to-follow instructions included for a do-it-yourself install •Made in the U.S.A. PART # 1010-1315 1010-1316

DESCRIPTION SUG. RETAIL For 93-06 Big Twin w/ CV carb, 01-13 Twin Cam w/ Delphi EFI (except 08-13 Dressers, H-D FL Trikes) $299.95 For 08-13 FLHT/FLHX/FLTR/FLHR and H-D FL Trike models 299.95

EXHAUST VENTURI AIR CLEANER FACEPLATE

•Allows customer to change any existing RSD Venturi Air Cleaner faceplate to a new design •Available in Black Ops™ •Black Ops™, RSD’s newest finish, features gloss black on top of a contrasting textured black for outstanding durability and good looks •Specifically designed to match RSD wheels •Fit RSD Venturi Air Cleaners only •Made in the U.S.A. PART # 1014-0163

DESCRIPTION Morris Black Ops™

1010-1319 1010-1321

SUG. RETAIL $149.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

1010-1320

ELECTRICAL

BILLET AIR CLEANER COVER

•CNC machined from solid billet aluminum •Carefully polished, show-chrome •Available in smooth or ball milled in a chrome or black finish •Chrome hardware included •6.280” diameter PART # DESCRIPTION SUG. RETAIL FOR 99-13 BIG TWINS (EXCEPT 08-13 DYNA) 1010-1321 Millennium smooth, black $79.95 FOR 84-99 BIG TWINS EVOLUTION BIG TWINS W/ ROUND AIR CLEANERS 1010-1317 Millennium smooth, chrome 69.95 1010-1318 Millennium smooth, black 69.95

LIGHTING

PART # DESCRIPTION SUG. RETAIL FOR 84-99 BIG TWINS EVOLUTION BIG TWINS W/ ROUND AIR CLEANERS (CONT) 1010-1319 Millennium ball-milled, chrome $69.95 1010-1320 Millennium ball-milled, black 69.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

1011-2956

1011-2958

DASHES & GAUGES

1011-2960

1011-2957

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

OEM STYLE REPLACEMENT AIR FILTER ELEMENTS •High-quality paper filter medium •Meets or exceeds OEM specifications •For use with OEM stock air filter housings

Note: Not for use with Screamin’ Eagle air cleaners.

PART # 1011-2956 1011-2957 1011-2958 1011-2960 1011-2959 1011-2961

1011-2959

DESCRIPTION For 99-13 Twin Cam (except 11-13 FXS, 12-13 FLS, 99-01 EFI models, 08-13 FLHT/FLHR/FLHX/FLTR and H-D FL Trike models, 08-13 Dyna Glide models, 08-11 FLSTSB); repl. OEM # 29461-99, 9400042 For 08-13 FLHT, FLHR, FLTR, FLHX and H-D FL Trikes; repl. OEM #29633-08 For 08-13 FXD, FXDB, FXDC, FXDF, FXDL, FXDWG (except 13 FXDB); repl. OEM #29191-08 For 90-99 80” Evolution; repl. OEM #29330-96 For 04-13 XL (except 13 1200V); repl. OEM #29331-04 For 88-03 XL; repl. OEM #29331-96

All part numbers in BLUE are new for 2013.

1011-2961 SUG. RETAIL $26.95 26.95 26.95 26.95 26.95 26.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

45

SECTION

8

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BOLT-ON BIG BORE KITS

0903-0910

0903-0916

0903-0915

•Revolution™ aerospace-grade all-aluminum cylinders with nickel-silicon-carbide electroplated bores which means NO SLEEVING; allows larger bore sizes and less friction for more horsepower, lower temps and a longer lifespan •True bolt-on kit that delivers major power with no machine work required •Also includes Wiseco forged pistons with rings (that are specifically designed for optimal compatibility with Revolution Performance’s cylinders), wrist pins, circlips and high-performance head and base gaskets •Available in silver, black and black highlight finishes •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL 107” KITS FOR 07-13 TWIN CAM (3.938” BORE CYLINDERS 10.5:1 FLAT TOP PISTONS) 0903-0916 Black $999.95

PART # DESCRIPTION SUG. RETAIL 1250CC KITS FOR XB12 39/16” BORE CYLYNDERS 10.5:1 FORGED PISTONS 0903-0909 Black $999.95 0903-0910 Silver 999.95

PART # DESCRIPTION SUG. RETAIL 515CC KITS FOR BLAST 39/16” BORE CYLYNDER 10.5:1 FORGED PISTON 0903-0913 Black $603.95 0903-0914 Silver 603.95 0903-0915 Black highlights 603.95

BIG BORE PISTON KITS

•Top-quality piston kit featuring superior ring seal, bore compatibility, quiet running and longer lifespan •2,000 hours of durability testing behind every piston •Auto-Fit Coating™ is a permanently bonded, moly-based coating process, designed to last for the life of the piston •Accurate to a 30 micron thickness to deliver tight 0910-2768 piston-to-sidewall clearances for ultra-quiet operation •Gas nitride-coated rings offer the ultimate compatibility with nickel-silicon-carbide-plated bores •Replacement piston rings are available separately (sold as a set for one piston) •Made in the U.S.A. PART # DESCRIPTION NOTE: Piston kits are intended for use 0910-2768 with Revolution Big Bore Kits only. 0910-2769 NOTE: Not recommended for use with cast iron cylinders.

0910-2770 0910-2771

0910-2770

0910-2769

SUG. RETAIL 117” kit for 07-13 Twin Cam (domed; 4.125” bore; 4” stroke; 10.5:1 comp) $369.95 85” kit for 84-99 Evo Big Twin (flat-top; 3.563” bore; 4.25” stroke; 10.5:1 comp) 371.95 1250CC kit for 04-13 XL (dished -5cc; 3.563” bore; 3.813” stroke; 9.5:1 comp) 373.95 1250CC kit for 03-09 XB12 w/ Thunderstorm heads (3.563” bore; 3.813” stroke; 10.5:1 comp) 375.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

MONSTER BIG BORE KITS

•Revolution™ aerospace-grade all-aluminum cylinders with nickel-silicon-carbide electroplated bores 0903-0912 which means NO SLEEVING; allows larger 0903-0905 bore sizes and less friction for more 0903-0900 horsepower, lower temps and a longer lifespan •Monster power in a package that’s tested, reliable and, most importantly, really big •Kits include Revolution Performance cylinders, forged pistons, wrist pins, circlips and gaskets •Available in four finishes: natural silver, black, black with highlighted fins, or granite (matches the engines of Screamin’ Eagle models) •Made in the U.S.A. NOTE: All kits require case-boring.

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

46

PART # DESCRIPTION SUG. RETAIL 127” KITS FOR 99-13 TWIN CAM W/ S&S FLYWHEEL (4.250 BORE CYLINDERS; 4.5” STROKE; 10.5:1 FLAT-TOP PISTONS) 0903-0899 Black $1,109.95 0903-0900 Black w/ highlighted fins 1,109.95 0903-0901 Natural silver 1,109.95 0903-0902 Granite 1,109.95 90” KITS FOR XB12 37/8” BORE CYLINDERS 10.5:1 FORGED PISTONS 0903-0907 Black 999.95 0903-0908 Silver 999.95

PART # DESCRIPTION SUG. RETAIL 88” KITS FOR XB12 39/16” BORE CYLINDERS 10.5:1 FORGED PISTONS 0903-0903 Silver $999.95 0903-0904 Black 999.95 0903-0905 Black w/highlighted fins (for motors with thunderstorm heads) 999.95 0903-0906 Black (for motors with thunderstorm heads) 999.95 600CC KITS FOR BLAST 33/16” BORE CYLINDERS 10.5:1 FORGED PISTON 0903-0911 Black 603.95 0903-0912 Silver 603.95

0903-0945

XL 883 TO 1200 CONVERSION KIT

0903-0944 •Increase displacement from 883cc to 1200cc •Save time because pistons are already fit to the cylinders – ready to assemble out of the box •No machining •No re-balancing of 883cc flywheels •No cylinder head modifications •Durable powdercoat finish •Available in wrinkle black and silver powdercoat finish •Big bore 31/2” cylinders •9.7:1 with stock 883cc heads PART # DESCRIPTION SUG. RETAIL •Kits include cylinders, pistons, rings and gaskets (head, base and exhaust) FOR 86-13 XL 883 MODELS 0903-0944 Silver $964.95 •Made in the U.S.A.

PART # DESCRIPTION FOR 86-13 XL 883 MODELS (CONT) 0903-0945 Wrinkle black

All part numbers in BLUE are new for 2013.

SUG. RETAIL $964.95

SECTION

8

WINDSHIELDS & FAIRINGS TITANIUM VALVE SPRING RETAINER KITS

•For use with Screamin’ Eagle performance Beehive® valve-springs •PART #0926-2264 includes retainers, steel triple groove keepers and Viton® valve seals for factory guides •PART #0926-2265 includes Ti retainers, standard height steel keepers, machined steel spring seats and Viton® valve seals for factory guides

.650” VALVE SPRING KIT

•Works with cams up to .650” lift •Manufactured from ultra-clean high-silicon Kobe-alloy wire, then micro-shot peened and nitrided •CNC-machined 9” locks •High-performance conical single-wire spring •Chromoly forged retainers •Kit includes valve keepers, top collars, bottom collars, springs and shims NOTE: S&S recommends roller rocker arms be used with lifts over .585”.

PART # 0926-2069

DESCRIPTION For 05-13 Twin Cam (7mm valve stems)

SUG. RETAIL $160.95

PART # 0926-2264 0926-2265

TOURING AUDIO & COMMUNICATION LUGGAGE 0926-2264

DESCRIPTION SUG. RETAIL For 05-13 Twin Cam, 04-13 XL/XR $129.95 For 84-04 EVO/Twin Cam Big Twin, 86-03 XL , 95-02 Buell 139.95

STANDARD ADJUSTABLE PUSHROD KIT WITH COVERS

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

NOTE: Requires rocker box removal for installation.

PART # 0928-0037

.585” VALVE SPRING KIT

•Unique S&S design dual-spring kit reduces the risk of valve float •For valve lift to .585” with 1.800”/130 lb. installed height, 325 lb. at max lift •Includes springs, top and bottom collars, keeper shims and valve seals •Made in the U.S.A. PART # 0926-2068 0926-2057

DESCRIPTION For 05-13 Big Twin (7mm) For 84-04 Big Twin

SUG. RETAIL $124.95 109.95

0929-0041

DESCRIPTION For 04-13 XL models

ELECTRICAL SUG. RETAIL $209.95

LIGHTING QUICKEE ADJUSTABLE PUSHROD KIT WITH COVERS

HANDLEBARS, CONTROLS & MIRRORS

•Kit includes pushrods, chrome pushrod covers and keepers and O-rings •Pushrods are made out of 7/16” o.d. chromoly steel tubing for strength and durability •Easy to install •Adjustable to ensure consistent valve train operation under all conditions •Made in the U.S.A.

CABLES BRAKES TANKS & OIL FILTERS

NOTE: Can be installed without removal of rocker box.

PART # 0928-0036

0929-0040

PREMIUM HIGH-PERFORMANCE TAPPETS

•Reduced valve train noise from start up to shut down •Close tolerance for low leak-down rates – fast pumpup and superior high rpm performance •Low mass, bearing grade, silicon nitride check ball and lighter check ball spring – enhances fast pump-up and quiet operation •100% tested to ensure that leak down and top end oil flow are within specification •Available with or without the S&S HL2T limited travel kit •Sold in sets of four •Made in the U.S.A. PART # DESCRIPTION FOR 99-13 BIG TWIN, 00-13 XL MODELS 0929-0040 W/ HL2T kit 0929-0041 W/o HL2T kit

SUG.RETAIL $289.95 269.95

EXHAUST FUEL/AIR SYSTEMS

•Kit includes chrome pushrods, covers, keepers and O-rings •Pushrods are made out of 7/16” o.d. chromoly steel tubing for strength and durability •Adjustable to ensure accurate valve train operation under all conditions •Compatible with solid and hydraulic lifters •Made in the U.S.A.

0926-2068

SEATS & SISSY BARS

DESCRIPTION For 04-13 XL models

SUG. RETAIL $249.95

FRAMES, SUSPENSION & FENDERS

HIGHPERFORMANCE TAPPETS

•Great choice for any stock or high-performance application •Only the finest materials and precision machining techniques are used on the manufacture of these lifters, and strict quality control ensures that they will work flawlessly every time, no matter what the application •HL2T kit not included •Sold in sets of four •Made in the U.S.A. PART # 0929-0042

DESCRIPTION For 99-13 Twin Cam, 00-13 XL models

All part numbers in BLUE are new for 2013.

DASHES & GAUGES

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS SUG. RETAIL $129.95

COVERS, SECURITY & GENERAL

47

SECTION

8

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

HP+® CAMCHEST KITS

•Take the guesswork out of ordering •All necessary components from top to bottom of the camchest •Each part works and functions together in total harmony 0925-0734 •Provides maximum reliability, 0925-0733 longevity, peak performance and the coolest engine and oil temperatures obtainable •Conversion chain drive kits allows owners to update old mechanical style cams and tensioners to new hydraulic tensioner system •Kits include Feuling® HP+® high volume oil pump, high flow billet Camplate, REAPER® Series Camshafts, HP+® hydraulic roller Lifters, adjustable Pushrods, Timken®/ Koyo® Bearings, Gaskets, O-rings, hardware, ARP® fasteners, washers, moly lube 0925-0731 0925-0729 and Loctite® •Kits utilize the 99-06 inner cam journals with the 07-13 outer cam journals allowing the use of the 07-13 camplates, oil pump, hydraulic chain tensioners and chain drive system NOTE: Installation of gear drive cams will require separate purchase of S&S or Andrews 4-gear drive kit; see 2013 FatBook™.

594 CAM KITS PART #

ELECTRICAL

DESCRIPTION

SUG. RETAIL

CHAIN DRIVE

PART #

0925-0735

For all 07-13 Twin Cam and 06 Dyna Glide

0925-0734

For 99-06 Twin Cam (except 06 Dyna Glide)

$1,794.95 1,794.95

0925-0737

For all 07-13 Twin Cam and 06 Dyna Glide

1,794.95

0925-0736

For 99-06 Twin Cam (except 06 Dyna Glide)

1,794.95

630 CAM KITS PART #

DESCRIPTION

0925-0733 1

GEAR DRIVE

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

COVERS, SECURITY & GENERAL

48

SUG. RETAIL

CHAIN DRIVE

SUG. RETAIL

For 99-06 Twin Cam (except 06 Dyna Glide)

1

$1,794.95

Conversion cams use early 99-06 style inner cam journals with late style 07-13 outer journals requiring late style hydraulic chain tensioners, sprockets and chains.

SUG. RETAIL

DESCRIPTION

PART #

CHAIN DRIVE CONVERSION $1,824.95

For all 07-13 Twin Cam and 06 Dyna Glide

0925-0731 GEAR DRIVE

0925-0732 1

0925-0730

For all 07-13 Twin Cam and 06 Dyna Glide

1,824.95

0925-0729

For 99-06 Twin Cam (except 06 Dyna Glide)

1,824.95

$1,824.95

For 99-06 Twin Cam (except 06 Dyna Glide)

1

Conversion cams use early 99-06 style inner cam journals with late style 07-13 outer journals requiring late style hydraulic chain tensioners, sprockets and chains.

REAPER® CAMS FOR TWIN CAM

•Produce more power and torque in the riding RPM range increasing throttle response, acceleration and fuel mileage •Wide lobe separations produce wide power bands •Smooth camshaft lobe ramps are easier on valve-train components and eliminate excessive valve-train noise and wear •Dyno proven and track tested •Feuling® camshaft installation kits recommended; see 2013 FatBook™ •Made in the U.S.A. NOTE: Installation will require the separate purchase of a S&S or Andrews 4-gear gear drive kit; see 2013 FatBook™.

594 CAMS

543 CAMS

•The ‘Freeway Flyer’, great camshafts for those who want more topend power than the 525 cams without sacrificing low-end torque •Extremely smooth cam lobe layout maintains quiet valve train and produces the smoothest cruise power band available •Excellent bolt-in camshaft for stock to mild 96” and 103” engines and works well in 88” and 95” engines •Cam is easy starting, increases throttle response and fuel mileage.

Responds well to increased compression ratio, performance exhaust and a high-flow air cleaner •Performance valve springs are required on 99-04 engines and performance pushrods and lifters are recommended but not required •1,900 - 6,000 rpm power range

•Fierce performing camshaft for an array of engine sizes, large displacement 103”, 110” and 124” engines looking for a superior torque band with excellent horsepower gains in heavy bikes (2,200 - 6,250 rpm) •Smaller high-revving displacement 95” style engines in lighter bikes looking to twist the throttle and tap into some horsepower (2,500 - 6,800 rpm) •Large displacements respond well to increased compression ratio and smaller displacements will require it

PART #

PART #

DESCRIPTION

SUG. RETAIL

GRIND

543G gear drive cam kit VALVE LIFT

OPEN

CLOSE

NOTE: 594 cams require high-performance valve springs, pushrods, lifters, carburetor and/or throttle body work, performance exhaust, intake and clutch.

DESCRIPTION

SUG. RETAIL

FOR ALL 07-13 TWIN CAM AND 06 DYNA GLIDE

FOR ALL 07-13 TWIN CAM AND 06 DYNA GLIDE 0925-0727

HARDWARE, CHEMICALS & TOOLS

DESCRIPTION

CHAIN DRIVE CONVERSION

DURATION @ .053”

$329.95 LIFT @ TDC

LOBE CENTERLINE

543/543C

0925-0728

GRIND

594G gear drive cam kit VALVE LIFT

$329.95

OPEN

CLOSE

DURATION @ .053”

64°

16°

260°

LIFT @ TDC

LOBE CENTERLINE

.167”

114°

594/594C (CONT)

Intake

543

15°

43°

238°

.160”

104°

Exhaust

Exhaust

574

56°

12°

248°

.174”

112°

630/630C Intake

630

20°

58°

258°

.188”

109°

594

19°

56°

255°

.190”

108.5°

Exhaust

630

64°

19°

263°

.171”

112.5°

594/594C Intake

604

All part numbers in BLUE are new for 2013.

SECTION

8

WINDSHIELDS & FAIRINGS TOURING

EASY START CAM KITS

•Start any engine regardless of displacement or compression ratio with a stock starter •Save your starter and battery; tested for 10,000 starts without running battery down •Allow for easy start by initially reducing crank compression, but once the engine starts and rpm increases, the compression release lobe is centrifugally retracted and the engine runs normally, with full compression, and without any loss in performance •Available in chain drive and gear drive versions •All chain-drive cams include installation kit •All gear-drive cams include 4-gear set and installation kit •Made in the U.S.A.

AUDIO & COMMUNICATION 0925-0746

LUGGAGE SEATS & SISSY BARS

NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

EXHAUST

0925-0747

NOTE: Due to the inherent characteristics of gear drives, you may experience more valve train noise.

FUEL/AIR SYSTEMS

640 EZ CAMS

•For 95/96/103/110 cubic-inch engines •Compression ratios from 10.5:1 to 11.5:1 •Strongest from 3,000-6,000 rpm •High-lift springs required PART # DESCRIPTION FOR ALL 07-13 BIG TWIN AND 06 DYNA 0925-0746 Chain-drive cam kit FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 0925-0747 Gear-drive cam kit

SUG. RETAIL $409.95

GRIND S&S 640 Intake Exhaust

OPEN

CLOSE

DURATION @ .053

VALVE LIFT

20° 60°

60° 25°

265° 270°

.640” .640”

824.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

CAM KITS FOR TWIN CAM GEAR DRIVE CAM KITS

•Camshaft gear drive kits increase valve timing accuracy by eliminating timing chain lash and loosely fit stock chain drive •Reverses the rear cam’s direction of rotation, providing additional operating clearance between cam lobes; as a result, higher cam lifts are possible with the gear drive kit •Kits include cams, inner gears, outer drive gears, inner and outer bearings, gasket and instructions •Material must be removed from the inner surface of the stock gear cover to install S&S gear drive cams •A hydraulic press and other professional-level tools are required to install these kits •S&S recommends that adjustable pushrod/ cover kit PART #0928-0017 be used •Cam bearings and gaskets must be replaced when installing new cams •Made in the U.S.A.

ELECTRICAL 0925-0745

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

0925-0742

BRAKES

NOTE: Kits require high-performance valve springs when installed in 99-04 models.

NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

TANKS & OIL FILTERS

NOTE: Due to the inherent characteristics of gear drives, you may experience more valve train noise.

CHAIN DRIVE CAM KITS

•Cams for 00-06 Twin Cam are for use with stock splined drive gears; for installation on 99 Twin Cam motors you must purchase splined outer drive sprocket; S&S recommends that Andrews 4340 steel drive sprocket PART #DS-199175 be used •Cams for 06 Dyna and 07-13 Twin Cam are for use with models with hydraulic tensioner chain-drive system; 551C are bolt-in applications, all others require high-lift valve springs •Made in the U.S.A. NOTE: Installer must check coil bind, valve-to-valve clearance and valve-to-piston clearance.

551 SERIES CHAIN DRIVE CAM KITS

•Designed as bolt-in cam for 05-13 touring bikes with compression ratio between 9:1 and 9:9 •More power across the rpm range, with improved low and midrange torque •Can be used with stock pushrods, springs and lifters •Strongest from 0-4,000 rpm •99-04 models require high lift springs PART # DESCRIPTION FOR 07-13 TWIN CAM 0925-0743 551C chain drive cam kit FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 0925-0742 551C gear drive cam kit GRIND 551 SERIES Intake Exhaust

SUG. RETAIL $314.95 729.95

OPEN

CLOSE

DURATION @ .053

VALVE LIFT

18° 39°

20° 15°

215° 237°

.550” .550”

583 SERIES GRIND CAMS

GRIND 583 SERIES Intake Exhaust

SUG. RETAIL $314.95 729.95

OPEN

CLOSE

DURATION @ .053

VALVE LIFT

8° 60°

15° 22°

204° 262°

.583” .583”

All part numbers in BLUE are new for 2013.

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

•Great overall cam for Softail and Dyna •Provides strong low-end torque and horsepower •Strongest from 1500-5000 rpm •99-04 models require high lift springs

PART # DESCRIPTION FOR 07-13 TWIN CAM 0925-0745 583C chain drive cam kit FOR 99-06 TWIN CAM (EXCEPT 06 DYNA) 0925-0744 583C gear drive cam kit

DASHES & GAUGES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

49

SECTION

8

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

CAMPLATE RELIEF VALVE

•Camplate pressure relief valve plunger is precision machined and heat-treated steel •Installation and bench testing with pressure test tool to ensure proper valve seal and valve operation is recommended •Fits all Twin Cam camplates including factory, Screamin’ Eagle, Feuling® and others PART # 0932-0086

DESCRIPTION Pressure relief valve

SUG. RETAIL $10.95

SCALLOP ROCKER BOX COVERS

•Direct replacements for OEM covers •All hardware and gaskets included •Machined Performance Machine logo •Available in Platinum-Cut finish (smooth black anodized surface with polished machined accents) •Sold in pairs •Made in the U.S.A. PART # 0940-1182

DESCRIPTION For 99-13 Twin Cam

SUG. RETAIL $599.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

0940-1186

0940-1188

0940-1187

CLARITY ROCKER BOX COVERS

•Exposed internals of the twin cam rocker boxes with a design that matches the rest of the Clarity line of products •The Clarity line gives a unique opportunity to customize the inside of the valve train with precision and detail •Laser engraved RSD logo •Available in chrome, Contrast Cut™ and Black Ops™ •Contrast Cut™ finish starts with a polished rocker box that has been black anodized, then recut to open up the design •Black Ops™ features gloss black on top of contrasting textured black for outstanding durability and good looks •Hardware included •Gaskets included •Sold as a pair PART # DESCRIPTION FOR 99-13 TWIN CAM MODELS 0940-1186 Contrast Cut™

SUG. RETAIL $654.95

PART # DESCRIPTION SUG. RETAIL FOR 99-13 TWIN CAM MODELS (CONT) 0940-1187 Chrome $654.95

PART # DESCRIPTION SUG. RETAIL FOR 99-13 TWIN CAM MODELS (CONT) 0940-1188 Black Ops™ $654.95

BRAKES SCALLOP CAM COVER

TANKS & OIL FILTERS

•Direct replacement for stock cover •Machined Performance Machine logo •All hardware and gasket included •Available in Platinum-Cut (smooth black anodized surface with polished machined accents) •Made in the U.S.A.

DASHES & GAUGES

PART # 0940-1181

FRAMES, SUSPENSION & FENDERS

DESCRIPTION FOR 01-13 Twin Cam

SUG. RETAIL $329.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

50

RIPPLE STYLE POINTS COVERS

•Available in CNC-machined 6061 T-6 billet aluminum that is hand polished and gloss black powder coated or in CNC-machined stainless with a hand polished .finish •Feature the popular rippled-water-droplet look; a classic styling element PART # DESCRIPTION FOR 99-13 TWIN CAM 0940-1196 Black powder coat aluminum 0940-1198 Polished stainless steel

0940-1196

0940-1195 0940-1198

SUG. RETAIL $29.95 59.95

PART # DESCRIPTION FOR 84-99 BIG TWIN (EXCEPT TWIN CAM), 04-13 XL 0940-1195 Black powder coat aluminum 0940-1197 Polished stainless steel

All part numbers in BLUE are new for 2013.

0940-1197 SUG. RETAIL $29.95 59.95

SECTION

9

WINDSHIELDS & FAIRINGS TOURING 1105-0070

1105-0075

SCALLOP DESIGN TRANSMISSION SIDE COVERS

•CNC machined from billet aluminum •Designed as a direct replacement for OEM transmission side cover •Allows use of your stock, cable/Hydraulic actuated clutch •Easy bolt-on installation •Hardware included •Available in Black Ops™, Contrast Cut™, Platinum-Cut and chrome finishes •Contrast Cut™ starts with a polished cover that has been black anodized, then re-cut to open up the design •Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet •Platinum-Cut uses the same process as Contrast-Cut with the addition of polished re-cut design •Made in the U.S.A. PART # DESCRIPTION 5-SPEED CABLE ACTUATED COVERS FOR 87-06 BIG TWIN (EXCEPT 06 DYNA); REPL. OEM #37105-87A 1105-0068 Contrast Cut™ 1105-0069 Chrome 1105-0070 Black Ops™ 1105-0075 Platinum-Cut 6-SPEED CABLE ACTUATED COVERS FOR 07-13 SOFTAIL, FLHT AND 06-13 DYNA; REPL. OEM #37116-06 1105-0071 Contrast Cut™ 1105-0072 Chrome 1105-0073 Black Ops™

SUG. RETAIL

$299.95 299.95 299.95 299.95

299.95 299.95 299.95

AUDIO & COMMUNICATION

1105-0071

LUGGAGE SEATS & SISSY BARS

1105-0066

EXHAUST

PART # DESCRIPTION SUG. RETAIL 6-SPEED CABLE ACTUATED COVERS FOR 07-13 SOFTAIL, FLHT AND 06-13 DYNA; REPL. OEM #37116-06 (CONT) 1105-0076 Platinum-Cut $299.95 6-SPEED HYDRAULIC ACTUATED COVERS FOR 07-13 SOFTAIL, FLHT AND 06-13 DYNA 1105-00651 Contrast Cut™ 359.95 1105-00661 Chrome 359.95 1105-00671 Black Ops™ 359.95 1105-0074 Platinum-Cut 349.95 1

Requires a master cylinder with an hydraulic line (not included).

11/16”

bore and requires custom

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

1105-0080 1105-0082

1105-0078

1105-0077

CLARITY TRANSMISSION TOP COVER

LIGHTING

•Available for 5-speed and 6-speed transmissions •Designed to match the rest of the Clarity line to expose the inner workings of the transmission •Designed as a direct replacement for your stock top cover •CNC machined from billet aluminum and polycarbonate •Proprietary abrasion-and UV-resistant film to protect yellowing, marring and breakage •Machined RSD logo •Available in chrome, Contrast Cut™ and Black Ops™ •Contrast Cut™ finish starts with a polished derby cover that has been black anodized, then recut to open up the design •Black Ops™ features gloss black on top of contrasting textured black for outstanding durability and good looks •All mounting hardware included •Gasket included •Made in the U.S.A. PART # DESCRIPTION 5-SPEED FOR 00-06 FXST/FLST, 01-06 FLHT/FLHR/FLHX/FLTR MODELS 1105-0080 Contrast Cut™ 1105-0081 Chrome 1105-0082 Black Ops™

SUG. RETAIL

$309.95 309.95 309.95

HANDLEBARS, CONTROLS & MIRRORS CABLES

PART # DESCRIPTION 6-SPEED FOR 07-08 SOFTAILS/07-08 TOURING/06-08 DYNA 1105-0077 Contrast Cut™ 1105-0078 Chrome 1105-0079 Black Ops™

SUG. RETAIL

$309.95 309.95 309.95

TANKS & OIL FILTERS DASHES & GAUGES

1107-0328

1107-0325

BRAKES

1107-0334

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1107-0324

WHEELS & AXLES CHROME OUTER PRIMARY COVERS

•Rugged, die-cast aluminum construction with a chrome-plated finish •Starter shaft bushings included; seals and other components must be ordered separately to complete installation PART # 1107-0324 1107-0325

DESCRIPTION For 07-13 Softail; repl. OEM #60782-06 For 06-13 FXD; repl. OEM #60764-06

SUG. RETAIL $299.95 299.95

OUTER PRIMARY COVERS

HARDWARE, CHEMICALS & TOOLS

•Die-cast aluminum construction for exact OEM fit •Bearing, bushings and mounting hardware not included •Available in black PART # 1107-0328 1107-0334

DESCRIPTION For 91-93 XL; repl. OEM #25430-89 For 06-13 FXD; repl. OEM #60764-06

All part numbers in BLUE are new for 2013.

SUG. RETAIL $224.95 219.95

COVERS, SECURITY & GENERAL

51

SECTION

9

WINDSHIELDS & FAIRINGS TOURING INNER PRIMARY COVER

•Die-cast aluminum •Available in black •CNC-machined for exact OEM fit •Bearings, bushings and mounting hardware not included

AUDIO & COMMUNICATION

PART # 1107-0332

LUGGAGE SEATS & SISSY BARS

DESCRIPTION For E84 FXST w/ rear chain drive

1120-0306

SUG. RETAIL $319.95

1107-0329

1120-0305

EXHAUST FUEL/AIR SYSTEMS SCALLOP DERBY COVER

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

INNER PRIMARY MAINSHAFT BEARING AND RACE

•Fits OEM and most aftermarket inner primaries PART # 1120-0305 1120-0306

ELECTRICAL

DESCRIPTION Inner race for 08-13 Twin Cam; repl. OEM #34091-08 Bearing for 07-13 Twin Cam; repl. OEM #9231

SUG. RETAIL $7.95 15.95

0940-1189

•Complete matching line •Direct replacement for stock derby covers on OEM primaries •Machined Performance Machine logo •Available in Platinum-Cut finish (smooth black anodized surface with polished machined accents) •Hardware and gasket included •Made in the U.S.A. PART # 1107-0329 1107-0330

DESCRIPTION For 99-13 Big Twin models For 84-98 Big Twin models

0940-1190

SUG. RETAIL $149.95 149.95

0940-1191

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

CLARITY DERBY COVERS

•Allows for viewing of the internal moving primary components •CNC machined from billet aluminum •Available in chrome, Contrast Cut™ or Black Ops™ •Contrast Cut™ finish starts with a polished derby cover that has been black anodized, then recut to open up the design •Black Ops™ features gloss black on top of contrasting textured black for outstanding durability and good looks •Matching Clarity air cleaner available •Hardware and gasket included •Made in the U.S.A. PART # FOR 04-13 XL 0940-1189 0940-1190 0940-1191

DESCRIPTION

SUG. RETAIL

Contrast Cut™ Chrome Black Ops™

$219.95 219.95 219.95

NAUTICAL STAR DERBY COVER

•Black powder-coated billet aluminum derby cover with a raised brass Nautical Star design •Made in the U.S.A. PART # 1107-0343

DESCRIPTION For 04-13 XL

SUG. RETAIL $173.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

52

SCALLOP INSPECTION COVER

•Complete matching cover line •Direct replacement for chain tension inspection cover on OEM primaries •Machined Performance Machine logo •Available in Platinum-Cut finish (smooth black anodized surface with polished machined accents) •All hardware and gasket included •Made in the U.S.A. PART # 1107-0331

DESCRIPTION For 84-06 FXST/FLST/FXWG and 93-05 FXDWG Models

All part numbers in BLUE are new for 2013.

SUG. RETAIL $99.95

SECTION 1120-0307

9

WINDSHIELDS & FAIRINGS

1120-0308

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE 2” BELT DRIVE KITS

TRANSMISSION & DRIVELINE

•The new 2” drive for the Softail® is loaded with style to accommodate custom trends •All billet construction with a unique top guard, provides long-lasting service and functionality •Kits include a ball bearing lock-up clutch, a black top belt guard and four different dome covers to allow for four different looks in one kit •Made in the U.S.A. PART # FOR 07-13 FXST/FLST 1120-0307

DESCRIPTION

SUG. RETAIL

Chrome

$2,646.95

PART # FOR 07-13 FXST/FLST (CONT) 1120-0308

DESCRIPTION Black

SUG. RETAIL

GASKETS & SEALS

$2,459.95

ELECTRICAL 1601-0379

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

1601-0380

SHIFT LINKAGE

CABLES

1601-0382

•CNC machined from solid billet aluminum •Polished stainless steel rod ends and chrome tapered cone nuts along with a trick-looking shift arm cover •Includes mounting hardware •113/4” eye-to-eye length is unadjusted, so you still have 1/2” of adjustment play as needed •Available in smooth or ball milled in a chrome or black finish PART # DESCRIPTION FOR 86-13 FXST/FLST/FLT/FLHT/FLHR/FLTR (EXCEPT 97-99 FLSTS) 1601-0379 Ball milled, chrome 1601-0380 Ball milled, black 1601-0381 Smooth, chrome 1601-0382 Smooth, black

BRAKES ROUND GROOVE SHIFTER ROD

SUG. RETAIL $99.95 99.95 99.95 99.95

•Cleanest shifter rod available period •CNC-machined from 6061 T-6 billet aluminum •Features a specially-designed spherical bearing pressed in for a clean look and no unsightly heim joints •Measures 12” L center to center PART # DS-375589

DESCRIPTION For 86-98 FLT and 86-13 FXST/FLST/ FXS/FLS (except 97-99 FLSTS)

SUG. RETAIL $104.95

1602-0872

WEDGY SHIFT LINKS

1601-0384

•Made from 6061 T-6 aluminum •Chrome plated or black anodized with accent cut •Easy bolt on installation •Mounting hardware included •Mounting holes are 13” apart center-to-center •Made in U.S.A. PART # DESCRIPTION FOR 86-13 FXST/FLST/FLT/FLHT/FLHR/FLTR/FLHX (EXCEPT 97-99 FLSTS) 1601-0384 Chrome 1601-0385 Black

SUG. RETAIL $175.95 175.95

All part numbers in BLUE are new for 2013.

PART # DESCRIPTION FOR 84-13 FLT/FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES 1602-0871 Chrome 1602-0872 Black

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

HEEL LEVER ELIMINATOR

•Billet adapter allows removal 1602-0871 and relocation of lever •Fills in space for clean, neat appearance •Machined from 6061 T-6 aluminum plated in chrome or powder coated in black •Made in U.S.A.

1601-0385

TANKS & OIL FILTERS

SUG. RETAIL

$40.95 40.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

53

SECTION

9

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

1601-0273

1601-0343

1601-0274

1601-0342

CUSTOM SHIFT LINKAGES

•Constructed of billet aluminum and finished with a polished and chrome plating or gloss black powdercoat with re-machined edges •5/16” fine-thread studs allow attachment to most shift levers •Studs are 121/4” on center •Available in flame or flame/skull designs •Includes mounting hardware PART # FOR 86-13 FLST/FLS MODELS 1601-0273 1601-0275 1601-0341 1601-0342

DESCRIPTION

SUG. RETAIL

Chrome flame Black flame Chrome flame/skull Black flame/skull

$76.95 76.95 82.95 82.95

PART # DESCRIPTION FOR 90-13 FLHT AND H-D FL TRIKES 1601-0272 Chrome flame 1601-0274 Black flame 1601-0343 Chrome flame/skull 1601-0344 Black flame/skull

SUG. RETAIL $82.95 76.95 82.95 82.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

FORGED ALUMINUM PULLEYS

•CNC-machined for an exact match to the Roland Sands Design wheel lineup •Precision-shaped tooth profile is designed to fit the belt perfectly •Available in Black Ops™ •Black Ops™ finish features a machined surface treated through a proprietary military spec process for strength and hardness, then further machined and anodized for a subtle yet striking black-on-black contrast that is scratch, weather and damage resistant; it is the ultimate low-maintenance finish •All applications require mounting bolts to be purchased separately •Made in the U.S.A. by Performance Machine

Judge Black Ops™ Diesel Black Ops™

NOTE: For matching rotors and wheels see 2013 Fatbook BRAKES and WHEELS & AXLES sections.

ELECTRICAL

DESCRIPTION FOR 07 FLSTC (1”) 66-tooth

JUDGE BLACK OPS™

DIESEL BLACK OPS™

1201-0611

1201-0623

SUG. RETAIL $578.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

54

IMAGE SERIES FORGED ALUMINUM PULLEYS

•CNC-machined for an exact match to PM wheels •Precision-shaped tooth profile is designed to fit the belt perfectly •Available in chrome or Platinum Cut •Platinum Cut™ takes the process one step farther by hand polishing the recut areas to a brilliant shine •00-06 Softail except 06 FXST pulleys include mounting bolts; all other applications require mounting bolts to be purchased separately (see 2013 Fatbook HARDWARE, CHEMICALS & TOOLS section) •Made in the U.S.A. NOTE: For matching rotors and wheels see 2013 Fatbook BRAKES and WHEELS & AXLES sections.

Paramount

NOTE: 08 FLHT/FLHR/FLHX/FLTR applications will require the removal of the cush-drive for installation.

DESCRIPTION PARAMOUNT SUG. RETAIL FOR 12-13 FXS/FLS/FLSTC/FLSTN/FLSTF (1”) 66-tooth 1201-0696 $598.95 FOR 08-11 FLSTF, 08-13 FXST/B/C (20MM) 66-tooth 1201-0694 598.95 FOR 07 FXST/FXSTB/FXSTC, 07 FLSTF (20MM) 66-tooth 1201-0688 598.95 FOR 06 FXST MODELS (20MM) 70-tooth 1201-0682 598.95 FOR 00-06 FXST/FLST (11/8”), EXCEPT 06 FXST MODELS 70-tooth 1201-0684 598.95 FOR 86-99 SOFTAIL, 91-05 DYNA GLIDE, 84-94 FXR, 04-06 FLT (11/8”) 70-tooth 1201-0680 598.95 FOR 86-99 SOFTAIL, 91-99 DYNA GLIDE, 84-94 FXR (11/2”) 70-tooth 1201-0678 598.95 FOR 08 FLHT/FLHR/FLHX/FLTR (1.0”) 66-tooth 1201-0692 598.95 FOR 07 FLHT/FLHR/FLHX/FLTR (1.0”) 66-tooth 1201-0686 598.95 FOR 85-03 FLT (11/2”) 70-tooth 1201-0678 598.95 FOR 07-13 DYNA (1”) 66-tooth 1201-0689 598.95

All part numbers in BLUE are new for 2013.

Paramount Platinum Cut PARAMOUNT PLATINUM CUT

SUG. RETAIL

1201-0695

$629.95

1201-0693

629.95

1201-0687

629.95

1201-0681

629.95

1201-0683

629.95

1201-0679

629.95

1201-0677

629.95

1201-0691

629.95

1201-0685

629.95

1201-0677

629.95

1201-0690

629.95

10/11 0407-0342

WINDSHIELDS & FAIRINGS FORK SEAL KITS

FORK SEAL AND DUST WIPER KITS

•Seal profile is engineered to create equal pressure in each seal lip; equalized seal pressure creates less drag and longer seal life •Patented MAX-LIFE has a coefficient of friction up to three times less than the OEM seal material •Triple lip seal design •Directional ribs allow seal to be installed easily •Kits include fork seals and dust wipers PART # 0407-0342 0407-0343 0407-0343 0407-0343 0407-0343 0407-0344 0407-0345 0407-0345 0407-0345 0407-0345 0407-0345 0407-0346 0407-0346

DESCRIPTION For 00-09 Buell Blast For 03 Buell XB9R For 03 Buell Lightning XB9S For 00-02 Buell Lightning X1 For 99-01 Buell Thunderbolt For 97-02 Buell Cyclone For 04-06 Buell Firebolt XB9R For 05-08 Buell Firebolt XB12R For 04-09 Buell Lightning XB9S For 05-09 Buelll Lightning XB12S For 06-09 Buell Ulysses XB12X For 09 Buell 1125CR For 08-09 Buell 1125R

2104-0253

SUG. RETAIL $27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95 27.95

•Patent-pending seal design and special elastomer has 1/3 of the stiction and up to four times the life of an OEM seal •Dual-lip design balances the drag forces across both sealing lips resulting in less lip distortion, which extends seal life and reduces seal operating temperature •Sold in pairs PART # 0407-0192 0407-0057 0407-0058

DESCRIPTION For 06-13 FXD, FXDWG, 08-11 FXCW w/ 49mm forks For 91-05 FXD, L87-13 FXR and XL models w/ 39mm Showa forks For 84-13 FXS/FXST/FLS/FLST models, 93-05 FXDWG models, 84-86 FXWG models and 84-13 FLT, FLHT, FLHX, FLS, FLTR and H-D FL Trike models w/ 41mm Showa forks

SUG. RETAIL $14.95

TOURING AUDIO & COMMUNICATION LUGGAGE

14.95

SEATS & SISSY BARS

14.95

EXHAUST FUEL/AIR SYSTEMS

FORK DUST SEALS

•Keep dirt and dust out of the fork seals to ensure long fork life •Black molded rubber; sold in pairs PART # 0406-0026

ENGINE

DESCRIPTION For 87-05 FXD, 87-13 XL and 87-94 FXR w/ 39mm forks; replaces OEM # 45401-87

SUG. RETAIL $13.95

TRANSMISSION & DRIVELINE

2104-0255

2104-0254

GASKETS & SEALS 2104-0256

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS 2104-0257

2104-0259

2104-0258

2104-0260

CABLES BRAKES TANKS & OIL FILTERS

2104-0261

DASHES & GAUGES 2104-0262

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

IGNITION WIRE KITS

•7mm suppression core wire kits •Fully insulated wires •24” L universal design •Includes spark plug terminals and boots •Sold in pairs •Made in the U.S.A. PART # 7MM SUPPRESSION CORE 2104-0253 2104-0254 2104-0255 2104-0256 2104-0257

DESCRIPTION Black White Cardinal Maize Straw

WHEELS & AXLES SUG. RETAIL $49.95 49.95 49.95 49.95 49.95

PART # DESCRIPTION 7MM SUPPRESSION CORE (CONT) 2104-0258 Gold Marigold 2104-0259 2104-0260 Green 2104-0261 Beige 2104-0262 Purple

All part numbers in BLUE are new for 2013.

SUG. RETAIL $49.95 49.95 49.95 49.95 49.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

55

SECTION

11

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

12 VOLT IGNITION COIL

•Performance, quality and value •35,000V-40,000V output •Molded body PART # 2102-0274

2102-0266

DESCRIPTION For 07-13 XL; repl OEM #31656-07

SUG. RETAIL $79.95

SEATS & SISSY BARS EXHAUST

2102-0264

UNIVERSAL BLACK “SUPER COIL” KITS

FUEL/AIR SYSTEMS

•Extremely high output and available in one- and two-coil versions •12V, 3 ohm coils ideal for custom and dual-plug applications; each comes with 8.8mm black plug wires NOTE: Not for use with CDI ignitions or Twin Cam applications.

2102-0270

ENGINE

PART # 2102-0266 2102-0264

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

SMOOTH COIL COVERS

•CNC machined from billet aluminum •Available in chrome and black anodized finish •Designed to be used with the Pro-1 billet motor mounts and coil brackets found on page 616 of the 2013 FatBook •Include chrome mounting hardware PART # 2102-0270 2102-0271

DESCRIPTION Chrome Black

SUG. RETAIL $164.95 164.95

CABLES

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

56

DESCRIPTION Grind-free jackshaft, 9-tooth

SUG. RETAIL $101.95

•For Drag Specialties’ batteries PART #s 2113-0275, 2113-0276 and 2113-0277 •Kit includes two “L” shape brass adapter nuts, four 6 x 13mm bolts, four flat washers and an extra two 6 x 13mm bolts, plus two flat washers which are used to fix “L” shape brass adapter nuts on battery

STARTER SOLENOID CONNECTOR

FOOTRESTS & LICENSE PLATE FRAMES

•The amazing jackshaft fixes the grind associated with BDL 3” open belt drive systems that utilize a one-piece starter jackshaft •The jackshaft is a three-piece design with ramped teeth and enough flex to integrate seamlessly with the belt drive ring gear •Made in the U.S.A.

REPLACEMENT ADAPTER HARDWARE KIT

BRAKES

FRAMES, SUSPENSION & FENDERS

GRIND-FREE STARTER JACKSHAFT

PART # 2110-0440

HANDLEBARS, CONTROLS & MIRRORS

DASHES & GAUGES

SUG. RETAIL $219.95 119.95

2102-0271

LIGHTING

TANKS & OIL FILTERS

DESCRIPTION Two-coil kit One-coil kit

•Female one-position connector •Connects wire to starter solenoid •Sold in 5-packs PART # 2120-0603

DESCRIPTION Starter solenoid connectors

SUG. RETAIL $5.95

PART # 2113-0307

DESCRIPTION Repl. adapter hardware kit

SUG. RETAIL $9.95

SOLID-COLOR BATTERY CABLES

•4-gauge cable manufactured with pure electrolytic-grade 36-gauge tinned copper strands for maximum current transfer and superior flexibility •All manufactured with 1/4” and 5/16” terminal ends •Increase starter performance by providing maximum current to starter motor •Sold each •Made in the U.S.A. PART # POSITIVE (RED) 2113-0308 2113-0309 2113-0310 2113-0311 2113-0312

DESCRIPTION 8” 10” 12” 14” 16”

SUG. RETAIL $17.95 18.95 19.95 21.95 22.95

2113-0317

2113-0312

PART # NEGATIVE (BLACK) 2113-0313 2113-0314 2113-0315 2113-0316 2113-0317

All part numbers in BLUE are new for 2013.

DESCRIPTION 8” 10” 12” 14” 16”

SUG. RETAIL $17.95 18.95 19.95 21.95 22.95

SECTION

11

WINDSHIELDS & FAIRINGS

2113-0303

2113-0299

TOURING 2113-0304

BATTERY CABLES

2113-0302

BATTERY CABLE KITS

•4-gauge cable manufactured with pure electrolytic-grade, 36-gauge tinned copper strands for maximum current transfer and superior flexibility •Increase starter performance by supplying maximum battery current to the starter motor •Contain all battery cables to replace OEM cables •Available in translucent black or clear •Made in the U.S.A. NOTE: Cables do not have auxiliary wires.

PART # DESCRIPTION CLEAR 2113-0299 For 94-09 FXD; cable lengths 9”, 14” and 15” 2113-0301 For 04-09 XL; cable lengths 13” and 13” TRANSLUCENT BLACK 2113-0300 For 94-09 FXD; cable lengths 9”, 14” and 15” 2113-0302 For 04-09 XL; cable lengths 13” and 13”

SUG. RETAIL $47.95 32.95 47.95 32.95

•Increase starter performance by supplying maximum battery current to the starter motor •4-gauge cable manufactured with pure electrolytic-grade, 36-gauge (.13mm) tinned copper strands for maximum current transfer and flexibility •Specially rated 125°C, oil- and grease-resistant, ultra-flexible translucent jacket guarantees excellent performance (available in translucent black or clear) •All cables manufactured with 1/4” terminal and 5/16” terminal •Sold each •Made in the U.S.A. NOTE: Cables do not have auxiliary wires.

PART # DESCRIPTION TRANSLUCENT CLEAR 2113-0303 27” 2113-0305 29”

SUG. RETAIL $30.95 31.95

PART # DESCRIPTION TRANSLUCENT BLACK 2113-0304 27” 2113-0306 29”

SUG. RETAIL $30.95 31.95

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

2106-0210

TRANSMISSION & DRIVELINE GASKETS & SEALS

2106-0211

2106-0209

ELECTRICAL

2106-0212

OIL PRESSURE SENDING UNIT COVER WIREFRAME IGNITION SWITCH COVERS

•Machined from lightweight and high-strength 6061 T-6 aluminum in two pieces, enabling contrasting color configurations, if desired •Easily installs with double-sided adhesive tape with no modifications required •Made in the U.S.A. PART # DESCRIPTION FOR 07-13 FLHT, FLHX, FLTR, H-D FL TRIKE 2106-0209 Chrome 2106-0210 Black anodized 2106-0211 Chrome/black anodized 2106-0212 Black anodized/chrome FOR 93-06 FLT/FLHT/FLHR/FLTR 2106-0213 Chrome 2106-0214 Black anodized 2106-0215 Chrome/black anodized 2106-0216 Black anodized/chrome

$189.95 189.95 189.95 189.95 189.95 189.95 189.95 189.95

CONTOUR SWITCH HOUSINGS

PART # DESCRIPTION SINGLE-BUTTON HOUSINGS 2106-0192 Black 2106-0193 Chrome OPTIONAL SWITCHES 2106-0186 Hi-low 2106-0188 Kill

SUG. RETAIL $149.95 149.95 8.95 8.95

PART # 2212-0432

DESCRIPTION For 87-98 FLTC/FLHTC (models w/ large 2-terminal sending units)

LIGHTING SUG. RETAIL $29.95

SUG. RETAIL

2106-0193

•Constructed from billet aluminum •Right-side single button design with turn/horn/start button installed •Optional high/low or kill switches sold separately •Designed for use with PM Contour controls •High quality switches with 36” leads •Available in chrome and black anodized •Housing, switches and buttons sold each •Made in the U.S.A.

•Sculpted cover has a chrome finish to dress up the stock oil pressure switch •Quick, easy installation

2106-0187

PART # DESCRIPTION REPL. SWITCHES 2106-0187 Turn, horn, start REPL. BUTTONS 2106-0191 Black button

SUG. RETAIL $8.95 2.95

2106-0194

CABLES

CONTOUR SWITCH HOUSINGS •Designed for use with PM Contour controls •Replaces OEM switch housing on 96-13 Touring models •Available for brake and hydraulic or cable clutch in four- or five-button configurations •Available in chrome or black anodized •Utilizes the OEM stereo and cruise control switches for a simple install and ease of use •Sold each •Made in the U.S.A. PART # BRAKE 2106-0194 2106-0195 2106-0198 2106-0199 HYDRAULIC CLUTCH 2106-0196 2106-0197 2106-0200 2106-0201 CABLE CLUTCH 2106-0202 2106-0203 2106-0204 2106-0205

All part numbers in BLUE are new for 2013.

DESCRIPTION

HANDLEBARS, CONTROLS & MIRRORS

BRAKES TANKS & OIL FILTERS

2106-0201

DASHES & GAUGES

SUG. RETAIL

4-button, 4-button, 5-button, 5-button,

black chrome black chrome

$329.95 329.95 329.95 329.95

4-button, 4-button, 5-button, 5-button,

black chrome black chrome

329.95 329.95 329.95 329.95

4-button, 4-button, 5-button, 5-button,

black chrome black chrome

329.95 329.95 329.95 329.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

57

SECTION

11

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

HANDLEBAR EXTENSION WIRING KIT

•Complete wiring harness extension kit for handlebar controls, including throttle-by-wire (TBW) applications •Color-coded to match the OEM wires; comes with complete wiring diagram •Wire extension lengths accommodate up to 20” Ape Hanger handlebars •Made in the U.S.A. PART # 2120-0552

DESCRIPTION For 08-13 FLHT/FLHR/FLTR/FLHX models

2120-0597

SUG. RETAIL $92.95

•Adds running, brake and turn signals to your factory Tour-Pak® •Requires a few few simple modifications to Tour-Pak® wiring •Connector is exposed behind seat for easy Tour-Pak® removal •Made in the U.S.A.

2120-0596

ENGINE

PART # 2120-0597 2120-0599 2120-0601

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

TOUR-PAK® QUICK-DISCONNECT WIRING HARNESS WITH BRAKE/TURN/RUNNING LIGHTS

DESCRIPTION For 96-13 FLHT models For 10-13 FLHX and FLTRX models For 09-13 FLHTC/USE models

SUG. RETAIL $161.95 161.95 161.95

TOUR-PAK® QUICK DISCONNECT WIRING HARNESS

•Add power to your Tour-Pak® with quickdisconnect convenience •Plugs into rear fender harness and connects into your Tour-Pak® •Connector is exposed behind seat for easy removal •Made in the U.S.A. PART # 2120-0596 2120-0598 2120-0600

DESCRIPTION For 96-13 FLHT models For 10-13 FLHX and FLTRX models For 09-13 FLHTC/USE models

SUG. RETAIL $43.95 43.95 43.95

2120-0594

AUXILIARY LAMP WIRING HARNESS

•Allows mounting of late-style 41/2” auxiliary lamps equipped with spade connectors on pre-05 models •Sold each •Requires two harnesses •Made in the U.S.A. PART # 2120-0604

CABLES

DESCRIPTION SUG. RETAIL Auxiliary lamp wiring harness; repl. OEM #68355-05 $9.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

58

2120-0595

IGNITION WIRING HARNESSES

WIRING HARNESS CONTROLLER

•Match OEM H-D specs •Simple, plug-and-play installation •Made in the U.S.A. PART # 2120-0594 2120-0595

DESCRIPTION For 00 Touring models w/ crank and cam position sensors For 01 Touring models w/ crank position sensor only

SUG. RETAIL $139.95 139.95

•Replaces complete wiring harness and relays (except fuel injection and ignition wiring) •Enables use of low voltage momentary switches and micro-wires •Simple installation; comes with complete installation instructions •Compact design 3” W x 2” L x 1” D enables easy concealment in frame •Fits all custom builds PART # 2120-0613

DESCRIPTION Wiring harness controller

All part numbers in BLUE are new for 2013.

SUG. RETAIL $405.95

SECTION

11

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 2120-0210

2120-0211

2120-0212

2120-0214

2120-0213

2120-0215

2120-0216

LUGGAGE SEATS & SISSY BARS

2120-0555

2120-0554

EXHAUST

2120-0558 2120-0217

2120-0218

FUEL/AIR SYSTEMS

2120-0557

2120-0556

DELPHI CONNECTORS AND MATING CONNECTORS

•Replacement OEM connectors include terminal ends and seals •Delphi connectors available in packs of five; replacement mating connectors sold each •Made in the U.S.A.

PART # DESCRIPTION REPLACEMENT AMP CONNECTORS (5-PK.) 2120-0210 For 05-13 models, connects active intake sensor, front O2 (oxygen) sensor and rear O2 sensor; repl. OEM #72007-05 2120-0211 For 07-13 models, connects the active intake sensor; repl. OEM #72012-07 REPLACEMENT DELPHI CONNECTORS (5-PK.) 2120-0212 For 06-13 models, connects ignition coil, idle speed sensor and fuel pump; repl. OEM #72066-06 2120-0213 For 06-11 models, connects intake air temp sensor; repl. OEM #72062-06 2120-0214 For 06-11 models, connects front fuel injector and rear fuel injector; repl. OEM #72098-06 2120-0215 For 06-11 models, connects speedometer sensor and siren; repl. OEM #72064-06 2120-0216 For 06-11 models, connects throttle position sensor (TPS); repl. OEM #72065-06 2120-0217 For 98-11 models, connects map sensor; repl. OEM #72230-98 2120-0218 For 95-05 models, connects front fuel injector and rear fuel injector; repl. OEM #72244-95 MATING CONNECTORS (EA.) 2120-0556 For PART #2120-0212; repl. OEM #13532244 2120-0558 For PART #2120-0214; repl. OEM #12129142-B 2120-0555 For PART #2120-0215; repl. OEM #15354716-B 2120-0554 For PART #2120-0216; repl. OEM #15336029-B 2120-0557 For PART #2120-0217; repl. OEM #12129948-B 2120-0559 For PART #2120-0218; repl. OEM #15419715

ENGINE 2120-0559 SUG. RETAIL $3.95 10.95 5.95 6.95 4.95 5.95 7.95 8.95 6.95

(ea.) (ea.) (ea.) (ea.) (ea.) (ea.) (ea.)

5.95 10.95 5.95 3.95 5.95 10.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

AMP POWER PLUG KIT

•Water-tight quick-disconnect female/male plug set •For 10-gauge power, ground and 16-18 gauge remote wire for power amps installed in saddle bags PART # 2120-0602

DASHES & GAUGES

DESCRIPTION AMP power plug kit

SUG. RETAIL $10.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

BLACK FLAG QUICK-DISCONNECT TERMINALS

WIRE SPOOLS

•100’ of 18-gauge wire •Colors match H-D OEM color codes PART # 2120-0612 2120-0614 2120-0615

2120-0612 DESCRIPTION Red/yellow stripe Violet Brown

SUG. RETAIL $24.95 24.95 24.95

•1/4 female quick disconnect matches OEM that was used on rear brake switches and horns •Sold in 10-packs PART # 2120-0563

DESCRIPTION SUG. RETAIL Black flag quick-disconnect terminals; repl. OEM #9898 $7.95

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

59

SECTION

11

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

2120-0579

2120-0586

2120-0582

2120-0587

2120-0581

2120-0580

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

2120-0588

2120-0590

2120-0589

HEAT SHRINK QUICK DISCONNECTS AND TERMINALS

2120-0591

PART # DESCRIPTION .25” QUICK DISCONNECTS 2120-0579 Male quick disconnect for 18-22 gauge wire 2120-0580 Male quick disconnect for 14-16 gauge wire 2120-0581 Female quick disconnect for 18-22 gauge wire 2120-0582 Female quick disconnect for 14-16 gauge wire FORK TERMINALS 2120-0586 For 18-22 gauge wire 2120-0587 For 14-16 gauge wire

PART # DESCRIPTION RING TERMINALS 2120-0588 For 18-22 gauge 2120-0589 For 18-22 gauge 2120-0590 For 18-22 gauge 2120-0591 For 14-16 gauge 2120-0592 For 14-16 gauge 2120-0593 For 14-16 gauge

•An inexpensive way to connect wiring •Fully-insulated PVC construction •Available for 18-22 gauge or 14-16 gauge wiring •Sold in 25-packs

SUG. RETAIL $39.95 35.95 26.95 26.95 26.95 49.95

2120-0593

2120-0592

SUG. RETAIL (#8) (#10) (.25”) (#8) (#10) (.25”)

$30.95 27.95 31.95 29.95 23.95 28.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

2120-0564

2120-0566 2120-0565

2120-0567

2120-0571

2120-0572

2120-0573

QUICK DISCONNECTS AND TERMINALS

•An inexpensive way to connect wiring •Fully-insulated PVC construction •Available for 18-22 gauge or 14-16 gauge wiring •Sold in 25-packs

2120-0574

PART # DESCRIPTION .25” QUICK DISCONNECTS 2120-0564 Male quick disconnect for 18-22 gauge wire 2120-0565 Male quick disconnect for 14-16 gauge wire 2120-0566 Female quick disconnect for 18-22 gauge wire 2120-0567 Female quick disconnect for 14-16 gauge wire FORK TERMINALS 2120-0571 For 18-22 gauge wire 2120-0572 For 14-16 gauge wire

2120-0575 SUG. RETAIL $8.95 8.95 7.95 7.95 14.95 13.95

2120-0576

2120-0577

PART # DESCRIPTION RING TERMINALS 2120-0573 For 18-22 gauge 2120-0574 For 18-22 gauge 2120-0575 For 18-22 gauge 2120-0576 For 14-16 gauge 2120-0577 For 14-16 gauge 2120-0578 For 14-16 gauge

2120-0578 SUG. RETAIL

(#8) (#10) (.25”) (#8) (#10) (#.25”)

$7.95 9.95 9.95 8.95 5.95 7.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

60

2120-0583

BUTT SPLICES

2120-0584

2120-0585

2120-0568

2120-0569

•Available in fully-insulated PCV or heat sealable styles •Heat sealable style creates a water-tight seal •Sold in 25-packs PART # HEAT SEALABLE 2120-0583 2120-0584 2120-0585

DESCRIPTION For 18-22 gauge wire For 14-16 gauge wire For 10-12 gauge wire

2120-0570 SUG. RETAIL $20.95 21.95 25.95

PART # NON HEAT SEALABLE 2120-0568 2120-0569 2120-0570

All part numbers in BLUE are new for 2013.

DESCRIPTION For 18-22 gauge wire For 14-16 gauge wire For 10-12 gauge wire

SUG. RETAIL $5.95 6.95 9.95

SECTION

12

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION 2001-0759

2001-0757

2001-0755

2001-0758

LUGGAGE

2001-0756

SEATS & SISSY BARS 53/4” TRACKER, CHRONO AND VINTAGE HEADLIGHT ASSEMBLIES

EXHAUST

•Designed to match Tracker, Chrono and Vintage components •CNC machined from billet aluminum •Available in Contrast Cut™, chrome and Black Ops™ •Contrast Cut™ starts with a polished cover that has been black anodized, then recut to open the design 2001-0760 •Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet •All have 3/4” wide mount •Mounting hardware included •DOT approved H-4 Bulb has twice the illumination of standard sealed beams •Made in the U.S.A. PART # TRACKER 2001-0757 2001-0758 2001-0759

FINISH Contrast Cut™ Chrome Black Ops™

SUG. RETAIL $474.95 474.95 474.95

PART # CHRONO 2001-0782 2001-0755 2001-0756

FUEL/AIR SYSTEMS 2001-0761

ENGINE

2001-0762

TRANSMISSION & DRIVELINE

FINISH

SUG. RETAIL

Contrast Cut™ Chrome Black Ops™

$474.95 474.95 474.95

PART # VINTAGE 2001-0760 2001-0761 2001-0762

FINISH Contrast Cut™ Chrome Black Ops™

SUG. RETAIL $474.95 474.95 474.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

2001-0771

2001-0770

2001-0767

2001-0773

2001-0776

2001-0778

CABLES

7” VISION SERIES HEADLIGHT BEZEL

•Constructed from billet aluminum •Available in five styles (Apex, Crossbar, Clean, Grill and Merc) and three finishes (chrome, Black Ops™ and Contrast Cut™) •Contrast Cut™ starts with a polished cover that has been black anodized, then re-cut to open up the design •Black Ops™ features gloss black on top of a contrasting textured black for the toughest, best-looking finish yet •Replaces OEM headlight bezel •Made in the U.S.A. NOTE: Will fit with HD Daymaker HID headlight.

BRAKES TANKS & OIL FILTERS

2001-0779

FOR 84-13 FLHX/FLHR/FLHT AND HD FL TRIKE PART # APEX 2001-0767 2001-0768 2001-0769 CROSSBAR 2001-0770 2001-0771 2001-0772

DESCRIPTION

SUG. RETAIL

Contrast Cut Chrome Black Ops

$179.95 179.95 179.95

Contrast Cut Chrome Black Ops

179.95 179.95 179.95

PART # CLEAN 2001-0773 2001-0774 2001-0775 GRILL 2001-0776 2001-0777 2001-0778

DESCRIPTION

SUG. RETAIL

Contrast Cut Chrome Black Ops

$179.95 179.95 179.95

Contrast Cut Chrome Black Ops

179.95 179.95 179.95

•Feature 3” DOT approved driving lights with 11/4” diameter mounting clamps •Install on engine guards (require at least 11/2” length of straight bar) •Lights can be mounted above or below, and can be rotated for limitless adjustment •Sold in pairs

SUG. RETAIL

Contrast Cut Chrome Black Ops

$179.95 179.95 179.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

HARDWARE, CHEMICALS & TOOLS

NOTE: Not compatible with fairing lowers.

DESCRIPTION Engine guard mount driving lights

DESCRIPTION

WHEELS & AXLES

ENGINE GUARD MOUNT DRIVING LIGHTS

PART # 2001-0663

PART # MERC 2001-0779 2001-0780 2001-0781

SUG. RETAIL $229.95

All part numbers in BLUE are new for 2013.

COVERS, SECURITY & GENERAL

61

SECTION

12

WINDSHIELDS & FAIRINGS 2010-0927

TOURING AUDIO & COMMUNICATION LUGGAGE

2010-0926

TAILLIGHT TAG BRACKETS

•Main bracket made from 3/16” laser cut steel •LED dual circuit tail/brake light •Billet aluminum taillight housing and retaining ring •Billet aluminum license plate frame laser engraved with RSD logo •Red polycarbonate taillight lens •Hardware included •Available in chrome, black or Black Ops™ •Easily adaptable to most custom bikes with a .472” mounting hole •Made in the U.S.A.

2010-0922

NOTE: May not be legal in some states.

SEATS & SISSY BARS EXHAUST

NOTE: Light does not meet DOT approval.

VERTICAL SHOCK-MOUNT STYLE

HORIZONTAL SHOCK-MOUNT STYLE PART # DESCRIPTION FOR 86-13 XL, 91-13 FXD/FXDWG 2010-0924 Black 2010-0925 Chrome 2010-0926 Black Ops

SUG. RETAIL $269.95 269.95 269.95

PART # DESCRIPTION FOR 86-13 XL, 91-13 FXD/FXDWG 2010-0927 Black 2010-0928 Chrome 2010-0929 Black Ops

SUG. RETAIL $269.95 269.95 269.95

HORIZONTAL FENDER-MOUNT STYLE PART # DESCRIPTION SUG. RETAIL FOR CUSTOM APPLICATIONS 2010-0921 Black $269.95 2010-0922 Chrome 269.95 2010-0923 Black Ops 269.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

TRACKER TAILLIGHTS WITH HORIZONTAL STYLE LICENSE PLATE HOLDER

•Billet aluminum license plate frame with hardware •Main bracket made from 3/16” laser-cut steel •LED dual-function taillight/brake light •Hot-rod-style beehive-shaped red taillight lens •Bolts directly to OEM passenger footpeg mounting hole •Retains use of passenger footpeg in OEM location •Made in the U.S.A. PART # FOR 00-13 FXST 2010-0918

DESCRIPTION

SUG. RETAIL

Black

$269.95

2010-0918

2010-0920

2010-0919

PART # DESCRIPTION FOR 00-13 FXST (CONT) 2010-0919 Chrome

SUG. RETAIL $269.95

PART # DESCRIPTION FOR 00-13 FXST (CONT) 2010-0920 Black Ops

SUG. RETAIL $269.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

62

BOBBER STYLE TAILLIGHT/ LICENSE PLATE MOUNTS

•Stainless steel or black light housing with a choice of brass or black grille on 1928 Ford style and a red glass lens •Black powder-coated backing plate •Available in side-mount or OEM styles •Side-mount style features 3/4” mounting hole •1928 Ford style is a 12V single-filament dual-bulb design •Willys style is a dual-function LED style •Made in the U.S.A.

2010-1072

2010-1069 2010-1066

2010-1075

PART # DESCRIPTION 1928 FORD STYLE 2010-1065 Vertical side mount, stainless steel housing w/ brass grille 2010-1070 Vertical side mount, black housing w/ black grille 2010-1075 Vertical side mount, black housing w/ brass grille 2010-1064 Vertical radius side mount, stainless steel housing w/ brass grille 2010-1069 Vertical radius side mount, black housing w/ black grille 2010-1074 Vertical radius side mount, black housing w/ brass grille 2010-1066 Horizontal side mount, stainless steel housing w/ brass grille

SUG. RETAIL

$238.95 238.95 238.95 238.95 238.95 238.95 238.95

2010-1056

PART # DESCRIPTION 1928 FORD STYLE (CONT) 2010-1071 Horizontal side mount, black housing w/ black grille 2010-1076 Horizontal side mount, black housing w/ brass grille 2010-1067 OEM mount, stainless steel housing w/ brass grille 2010-1072 OEM mount, black housing w/ black grille 2010-1077 OEM mount, black housing w/ brass grille WILLYS STYLE 2010-1055 Vertical side mount, stainless steel light 2010-1054 Vertical radius side mount, stainless steel light 2010-1056 Horizontal side mount, stainless steel light 2010-1053 OEM mount, stainless steel light

SUG. RETAIL $238.95 238.95 238.95 238.95 238.95 160.95 179.95 160.95 160.95

HEX TAILLIGHT/ LICENSE PLATE MOUNT

•Taillight features an aluminum hex bolt head design with 1” diameter dual-function LED light •Taillight available with a raw or black finish •Black powder-coated mount bracket with OEM 3-hole mount for H-D models •Made in the U.S.A. PART # 2010-1051

DESCRIPTION W/ raw taillight

SUG. RETAIL $152.95

2010-1051 PART # 2010-1052

2010-1052 DESCRIPTION W/ black powder-coat taillight

All part numbers in BLUE are new for 2013.

SUG. RETAIL $152.95

SECTION

12

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

LED HEX TAILLIGHT

•Aluminum construction with raw or black powder-coat finish •Hex bolt head design with 1” diameter dual-function LED light •Requires custom mounting •Made in the U.S.A. PART # 2010-1049

LUGGAGE 2010-1049

DESCRIPTION Raw

SUG. RETAIL $118.95

2010-1050 PART # 2010-1050

DESCRIPTION Black powder-coat

SUG. RETAIL $118.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

2010-1061

WILLYS STYLE LIGHT

SPYDER TAILLIGHT OVERLAYS

•Flush mount design •3” diameter light with 43/8” diameter stainless steel housing •16 rows of dual-function LEDs •Sold each •Not DOT approved PART # 2010-1057

DESCRIPTION Willys-style light

GASKETS & SEALS

•For NYC Choppers 1950 Pontiac style taillights •Available in chrome or black finish •Made in the U.S.A. SUG. RETAIL $92.95

PART # 2010-1061 2010-1062

2010-1062

ELECTRICAL

DESCRIPTION Chrome Black

SUG. RETAIL $39.95 39.95

2010-1068

2010-1063

2010-1073

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

1928 FORD STYLE TAILLIGHTS WITH GRILLES

BRAKES

•Stainless steel or black housing •Choice of black or brass grille •Red glass lens •12V dual-bulb design

TANKS & OIL FILTERS

NOTE: Not DOT approved.

PART # 2010-1063 2010-1068

DESCRIPTION Stainless steel housing with brass grille Black housing with black grille

SUG. RETAIL $156.95 156.95

PART # 2010-1073

DESCRIPTION Black housing with brass grille

SUG. RETAIL $156.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

1928 FORD TAILLIGHT GRILLES

•Fits all NYC Choppers 1928 Ford style taillights •Aluminum construction and available in polished, black or brass finish •Made in the U.S.A. PART # 2010-1058

DESCRIPTION Polished

WHEELS & AXLES

2010-1059

2010-1058 SUG. RETAIL $78.95

PART # 2010-1059

DESCRIPTION Black

SUG. RETAIL $98.95

All part numbers in BLUE are new for 2013.

HARDWARE, CHEMICALS & TOOLS

2010-1060 PART # 2010-1060

DESCRIPTION Brass

SUG. RETAIL $98.95

COVERS, SECURITY & GENERAL

63

SECTION

12

WINDSHIELDS & FAIRINGS

2010-1079

2010-1082

2010-1081

TOURING

2010-1080

AUDIO & COMMUNICATION LUGGAGE

MODEL B TAILLIGHTS

FUEL/AIR SYSTEMS

•Investment-cast aluminum light housing in either polished or black finishes •Extra thick injection-molded polycarbonate plastic lens •Custom 15-element LED board with two phases (brake light and running light) •Mounting brackets sold separately see FOOTRESTS & LICENSE PLATE FRAMES section •Outside diameter of the red taillight lens is 15/8” •When illuminated it is easily visible at approximately 300 feet in pitch darkness

•CNC lathe-turned 6061 T-6 aluminum light housing in either polished or black finishes •Extra thick injection-molded polycarbonate plastic lens •Custom 15-element LED board with two phases (brake light and running light) and three wires (ground, brake and running lights) •Two 1/4-20 button head Allen bolts for mounting on Biltwell brackets (here and in FOOTRESTS & LICENSE PLATE FRAMES section), custom fender bracket or Model-A style taillight/license plate brackets •Outside diameter of housing is just over 25/8” and the red taillight lens is 15/8” •When illuminated it is easily visible at approximately 300 feet in pitch darkness

ENGINE

PART # 2010-1079 2010-1080

PART # 2010-1081 2010-1082

SEATS & SISSY BARS EXHAUST

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

MAKO TAILLIGHTS

DESCRIPTION Polished Black

SUG. RETAIL $119.95 119.95

DESCRIPTION Polished Black

SUG. RETAIL $79.95 79.95

2010-1083

MODEL B TAILLIGHT BRACKETS

2010-1085

•Constructed out of laser-cut 1/8” thick sheet steel with a matte black electroplate finish •Finish is for rust-resistance only while brackets are stored/shipped •Brackets will require polishing and chroming or painting •Custom bending/fabrication is required PART # 2010-1083

DESCRIPTION Sissy bar bracket

SUG. RETAIL $9.95

PART # 2010-1085

DESCRIPTION Fender bracket

SUG. RETAIL $9.95

TEARDROP LED TAILLIGHTS

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

•Great for hard saddlebags or just about any flat surface •Flush-mount design with choice of red, clear, red with bar, or clear with bar high-strength polycarbonate lens •Dual function allows you to wire it for running and brake light functions •Epoxy-coated sealed electronics contain 51 super-bright LEDs •Measure 5.7” H x 2.4” W x .775” D •Mount with 2-threaded studs with nuts; studs are 1” L •Simple 3-wire hook-up •Mounting pad available separately •Sold each PART # 2010-1039 2010-1040 2010-1041

DESCRIPTION Teardrop taillight w/ red lens Teardrop taillight w/ clear lens Teardrop taillight w/ bar w/ red lens

SUG. RETAIL $72.95 72.95 72.95

2010-1039 PART # 2010-1042 2010-1043

2010-1040

2010-1041

2010-1043 2010-1042

DESCRIPTION Teardrop taillight w/ bar w/ clear lens Mounting pad

SUG. RETAIL $72.95 2.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

64

2010-1034

2010-1035

2010-1044

2010-1037

2010-1045

FLUSH MOUNT LED TAILLIGHTS

•Dual function LED taillight feature allows you to wire it for running and brake light functions with simple 3-wire hook up •The epoxy coated sealed electronics contain 17 super-bright LEDs •The lens is high-strength polycarbonate •Flush-mount design available in round or rectangle styles with a red or amber lens •Great for hard saddlebags or just about any flat surface •Mounts with 2 threaded studs with nuts; studs are 1” long •Mounting pad sold separately •Sold each PART # DESCRIPTION 3” ROUND TAILLIGHT (3” D X .730” H) 2010-1034 Red lens 2010-1035 Amber leas 2010-1036 Mounting pad 5.8” RECTANGLE TAILLIGHT (5.8” D X 2.40” W X .730” H) 2010-1037 Red lens

SUG. RETAIL $64.95 64.95 1.95 59.95

2010-1046

PART # DESCRIPTION 5.8” RECTANGLE TAILLIGHT (5.8” D X 2.40” W X .730” H) (CONT) 2010-1038 Mounting pad 5.125” RECTANGLE TAILLIGHT (5.8” D X 1.90” W X .785” H) 2010-1044 Red lens 2010-1045 Amber lens 2010-1046 Mounting pad

All part numbers in BLUE are new for 2013.

SUG. RETAIL $1.95 69.95 69.95 3.95

SECTION

WINDSHIELDS & FAIRINGS

2040-1236

2040-1237

12

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST 2040-1238

2040-1239

2040-1241

FUEL/AIR SYSTEMS

LED TAILLIGHTS WITH TURN SIGNALS

ENGINE

•Aircraft-grade 6061-T6 billet aluminum •Chrome or black anodized finish •120 Custom Dynamics Genesis II LEDs •Hardware for flush-mount or surface-mount •Includes red, clear and smoke lenses •Available in diamond, oval and half moon designs •Oval: 4.3” W X 2.4” H x .92” D •Half Moon: 5.8” W x 1.5” H x .92” D •Diamond: 5” W x 2.9” H x .92” D PART # DESCRIPTION DIAMOND W/ AMBER TURN 2040-1237 Black 2040-1236 Chrome

SUG. RETAIL $219.95 219.95

TRANSMISSION & DRIVELINE 2040-1240

PART # DESCRIPTION OVAL W/ RED TURN 2040-1239 Black 2040-1238 Chrome

SUG. RETAIL $219.95 219.95

GASKETS & SEALS

PART # DESCRIPTION HALF MOON W/ RED TURN 2040-1241 Black 2040-1240 Chrome

SUG. RETAIL $219.95 219.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

2040-1234

2040-1233 2040-1232

CABLES

MINI BULLET LED TURN SIGNALS

•Aircraft-grade 6061 T-6 Billet Aluminum •Double O-ring design with 24 Genesis LEDs •Clear lens with red or amber 3-wire dual-intensity LEDs •Available in chrome or black anodized finish •Dimensions: 2.50” Long x 1.8” diameter with 5/16”-24 mounting stud •Includes stainless steel mounting hardware •Sold in pairs PART # BLACK 2040-1232 2040-1233

DESCRIPTION

SUG. RETAIL

Amber Red

$189.95 189.95

BRAKES 2040-1235 PART # CHROME 2040-1234 2040-1235

DESCRIPTION Amber Red

SUG. RETAIL $189.95 189.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

UNICEA LED TAILLIGHT/TURN SIGNAL KIT

•Multi-function taillight/turn signal kit for bikes with tombstone taillights •Kit enables the taillight and rear turn signals to function together as running lights, brake lights and turn signals •Bright red LEDs illuminate all functions •Easy plug-and-play installation •Sold as a complete kit PART # 2010-1078

DESCRIPTION For 05-10 FLSTN, 05-07 FLSTSC, 07-08 FLHRSE, 02-03 FLSTS

SUG. RETAIL $249.95

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

65

SECTION

12

WINDSHIELDS & FAIRINGS 2040-1228

TOURING 2040-1216

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

2040-1229

EXHAUST FUEL/AIR SYSTEMS

2040-1217 2040-1230

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

LED BULLET MARKER LIGHTS

•The super-popular Bullet Marker Lights are now available in single-function amber LED style •Universal lights are available with 1.10” clear lenses and chrome bodies in smooth or ball-milled design •Marker lights measure 3” L x 11/2” tall from top of light to bottom of mounting base •Two sets of 3/8-16 mounting bolts included: 5/8” L and 1.250” L •Recommended for use as turn signals only •Cannot be used as running lights •Sold in pairs PART # 2040-1216 2040-1217

DESCRIPTION Smooth Ball-milled

2040-1218

SUG. RETAIL $59.95 59.95

2040-1219

2040-1220

BRAKES TANKS & OIL FILTERS

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

66

•Popular for mounting license frames •Single function LED with a chrome bezel •Self-grounding, single wire hook-up •Mount with single 6mm stud with nut •Sold in pairs PART # 2040-1228 2040-1229 2040-1230 2040-1231

DESCRIPTION Clear Amber Blue Red

SUG. RETAIL $19.95 19.95 19.95 19.95

2040-1221

FRAMES, SUSPENSION & FENDERS

WHEELS & AXLES

BULLET MINI MARKER LIGHTS

2040-1224

DASHES & GAUGES

FOOTRESTS & LICENSE PLATE FRAMES

2040-1231

2040-1225 2040-1222

2040-1223

MINI MARKER LED LIGHTS

•Include three super-bright single-function LEDs •11/8” bezel is stainless steel •Simple two-wire hook-up •Mount in a 3/8” hole with enclosed rubber grommet •Sold each PART # 2040-1218 2040-1219 2040-1220 2040-1221 2040-1222 2040-1223

2040-1226

DESCRIPTION Amber LED w/ amber lens Red LED w/ red lens Amber LED w/ clear lens Red LED w/ clear leans Blue LED w/ clear lens White LED w/ clear lens

SUG. RETAIL $19.95 19.95 19.95 19.95 19.95 19.95

DUAL FUNCTION MINI MARKER LIGHTS

•Include three super-bright dual-function LEDS •One circuit lights two LEDS and the other circuit lights all LEDs •Bezel is stainless steel •Simple three-wire hook-up •Mount in a 3/8” hole with enclosed rubber grommet •Sold each PART # 2040-1224 2040-1225 2040-1226 2040-1227

All part numbers in BLUE are new for 2013.

DESCRIPTION Amber LED w/ amber lens Red LED w/ red lens Amber LED w/ clear lens Red LED w/ clear lens

SUG. RETAIL $19.95 19.95 19.95 19.95

SECTION

12

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

REAR LED TURN SIGNALS

•Flat style design •Gloss black body with smoke lens and amber single-function LEDs •Mounts to OEM or OEM style flat turn signal mounts •Sold in pairs •Matching front turn signals available; see the 2013 FatBook page 850

2020-0591

LUGGAGE SEATS & SISSY BARS

NOTE: May require use of a load equalizer to function properly.

PART # 2020-0590

DESCRIPTION For 94-13 FL models w/ OEM flat signal mount (single function for rear use)

SUG. RETAIL $109.95

EXHAUST 2020-0592

FUEL/AIR SYSTEMS ENGINE

2020-0594

REPLACEMENT TOURING TURN SIGNALS

2020-0595

•Feature chrome housings with amber lenses •Front signals are dual filament (1157 bulb) •Rear signals are single filament (1156 bulb) •Sold in pairs

PART # DESCRIPTION FOR 94-13 FL MODELS WITH OEM FLAT SIGNAL MOUNT 2020-0591 Front signals; repl. OEM #68767-94 2020-0592 Rear signals; repl. OEM #68765-94A

TRANSMISSION & DRIVELINE SUG. RETAIL $55.95 55.95

GASKETS & SEALS ELECTRICAL

2020-0596

LIGHTING

2020-0597

REPLACEMENT TURN SIGNAL LENSES FOR DRESSERS •Replaces the OEM lenses •Available in amber, red, clear or smoked •Sold as a pair; clear and smoked lenses require amber or red bulb

PART # DESCRIPTION SUG. RETAIL FOR 86-13 FLT, FLHT, FLHR (EXCEPT FLHRS, FLHX), FLST, FLSTC, FXRD, FXRT; (W/ FLAT-STYLE SIGNAL HOUSING) 2020-0594 Amber $8.95 2020-0595 Clear 8.95 2020-0596 Red 8.95 2020-0597 Smoke 8.95

HANDLEBARS, CONTROLS & MIRRORS

TURN SIGNAL STANDOFF

•Aluminum construction with a gloss black finish •Sold each PART # 2020-0565

DESCRIPTION For 68-95 FL models

SUG. RETAIL $16.95

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SHORT TURN SIGNAL MOUNTS FOR 39MM/49MM FORKS

•Move turn signal closer to the bike for a cleaner look •Available in gloss black •Spacers are included for installation on 49mm forks •Sold in pairs NOTE: Triple trees must have pinch bolts that face outward at a 90° angle from the fork.

PART # 2020-0589

DESCRIPTION SUG. RETAIL For 87-00 FXR, 91-05 Dyna Glide, 87-07 XL w/ 39mm forks and 06-07 Dyna Glide w/ 49mm forks $24.95

WHEELS & AXLES TWO-PIECE FORK CLAMPS

HARDWARE, CHEMICALS & TOOLS

•Just the ticket for adding custom lights to fork tubes •Includes 5/16” hardware •Sold in pairs PART # 0450-0242 0450-0243

All part numbers in BLUE are new for 2013.

DESCRIPTION For 39mm fork tubes For 49mm fork tubes

SUG. RETAIL $59.95 59.95

COVERS, SECURITY & GENERAL

67

SECTION

12

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST BATTERY POWERED LED TRUNK LIGHT KIT

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

•Ultra-bright high-output SMT-style white LEDs •Sealed switch and housing •Surface mount •Requires four AAA batteries (not included)

12V LED DOME LITE

PART # 2040-1210

•12V in-line quick-connect fused-battery direct-wire harness with on/off switch •Eight SMD-type white LED array PART # 2040-1211

DESCRIPTION 12V LED dome lite

DESCRIPTION LED trunk light kit

SUG. RETAIL $20.95

SUG. RETAIL $64.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

ROTO 360° UNIVERSAL LED LIGHT •Light rotates 360° and tilts 45° •LED lights last 100,000 hours •Magnetic base included for mounting •Water and shock-resistant •Batteries included •Available in black •Sold to dealers in packs of 12, priced each PART # 2040-1215

DESCRIPTION Roto 360° universal LED light (12 pk.)

SUG. RETAIL $6.95

BRAKES

SLIMLINE MAGICAL WIZARD™ LIGHT STARTER KIT •Kit includes four color-changing Slimline Magical Wizard™ pods •Color Command™ Remote Control 3 Module with TruMAGIC™ •Two individual key fobs •LeverLockz™ installation kit with instructions •Slimline pod dimensions: 23/16” L x 7/16” W x 3/16” H

TANKS & OIL FILTERS

PART # 2040-1242

DASHES & GAUGES

DESCRIPTION Starter kit

SUG. RETAIL $189.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

68

TOUR-PAK® MODULE STROBES

•12VDC and works with LEDs or incandescent bulbs •10 user-selectable flash/ strobe patterns •Sealed weather-tight case •84 watts max power rating •Over current protection, thermal protection, short circuit protection and reverse wiring protection •Plug-and-play on all HD Tour-Paks® with rear 1157 incandescent bulbs •Compact size: 21/4” L x 11/4” W x 1/2” H

PASSING LAMP HARNESS ADAPTERS

PART # 2050-0160

PART # 2050-0162

DESCRIPTION Module strobes

SUG. RETAIL $49.95

•Use when installing 05 and later style 41/2” lamps on 84-04 models •Easy installation with plug-and-play adapters •For use with Küryakyn passing lamps, PART #2001-0665 •Sold in pairs DESCRIPTION Passing lamp harness adapters

All part numbers in BLUE are new for 2013.

SUG. RETAIL $16.95

SECTION

13

WINDSHIELDS & FAIRINGS 0601-2264

0601-2263

TOURING AUDIO & COMMUNICATION

BLACK 11/4” BUFFALO T-BARS

LUGGAGE

•Dimpled and drilled for internal wires; works with standard controls •Available with a show chrome or gloss black finish •Optional gauge mounts for T-Bars sold separately; see DASHES & GAUGES section in the 2013 FatBook™ •Made in the U.S.A.

SEATS & SISSY BARS

NOTE: Not for models with electronic throttle control.

NOTE: Compatible with hydraulic clutch controls.

PART # 0601-2263 0601-2264

DESCRIPTION 8” T-Bar (straight risers) 10” T-Bar (straight risers)

END RISE 12.5” 14.5”

WIDTH 31” 31”

CENTER WIDTH 8.5” 8.5”

PULLBACK 5.875” 5.875”

SUG. RETAIL $144.95 144.95

FUEL/AIR SYSTEMS

0601-1984

0601-1983

EXHAUST

ENGINE 1” VINTAGE MOTO HANDLEBARS

•Add period-style bobber ape-hanger handlebars to your ride •Available in chrome, black powder-coat and Black Ops™ •Bars are knurled, slotted and drilled for internal wiring •Stylish multi-hole drilled corner gussets offer strength and rigidity •Hand TIG welded •Standard 1” bars have 31/2” on-center knurling •Not for throttle-by-wire applications •Made in the U.S.A. PART # 0601-1982 0601-1983 0601-1984

DESCRIPTION Black powder-coat Chrome Black Ops

RISE 3” 3” 3”

TRANSMISSION & DRIVELINE GASKETS & SEALS

WIDTH 307/8” 307/8” 307/8”

CENTER WIDTH 65/8” 65/8” 65/8”

PULLBACK 4” 4” 4”

SUG. RETAIL $319.95 339.95 319.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

0601-2212 0601-2217

BRAKES

0601-2224

LUGGED HANDLEBARS

•Features a smooth bend between the lower 11/4” tubing and the 1” upper tubing •Uses CNC tube bending, laser cutting, and welding technology •Double wall manufacturing creates strength where it is needed while balancing weight and style •Accepts OEM handlebar clamps and controls •Available in chrome or black powdercoat •Made in the U.S.A PART # DESCRIPTION END RISE FOR 84-13 FLHT/FLHX 0601-2211 Black powdercoat 12” 0601-2212 Chrome 12” 0601-2213 Black powdercoat 14” 0601-2214 Chrome 14” FOR 97-13 FLTR/FLHR 0601-2223 Black powdercoat 12” 0601-2224 Chrome 12” 0601-2225 Black powdercoat 14” 0601-2226 Chrome 14” FOR 84-13 MODELS (EXCEPT SPRINGERS, 11-13 FXS AND 08-13 DRESSERS) 0601-2215 Black powdercoat 10” 0601-2216 Chrome 10” 0601-2217 Black powdercoat 12” 0601-2218 Chrome 12” 0601-2219 Black powdercoat 14” 0601-2220 Chrome 14” 0601-2221 Black powdercoat 16” 0601-2222 Chrome 16”

TANKS & OIL FILTERS

WIDTH

PULLBACK

35.96” 35.96” 36.46” 36.46”

9” 9” 9” 9”

36.44” 36.44” 36.85” 36.85”

21/2” 21/2” 21/2” 21/2”

299.95 379.95 299.95 379.95

341/2” 341/2” 35” 35” 35.38” 35.38” 353/4 353/4

7” 7” 7” 7” 7” 7” 7” 7”

299.95 379.95 299.95 379.95 299.95 379.95 299.95 379.95

All part numbers in BLUE are new for 2013.

SUG. RETAIL $299.95 379.95 299.95 379.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

69

SECTION

13

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

0601-2295 0601-2309

11/4” OLD SCHOOL HANDLEBARS

•Made with high-strength 11/4 diameter steel tubing •TIG welded for strength; welds polished for seamless appearance •Drilled for internal wiring •Laser-cut web design adds style and strength •Made in the U.S.A. PART # CHROME 0601-2293 0601-2295 0601-2297 0601-2299 0601-2301 0601-2303 0601-2305 0601-2307 0601-2309 0601-2311

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

4” Narrow Z 6” Narrow Z 8” Narrow Z 10” Narrow Z 12” Narrow Z 4” Web Z 6” Web Z 8” Web Z 10” Web Z 12” Web Z

4” 6” 8” 10” 12” 4” 6” 8” 10” 12”

24” 24” 24” 24” 24” 24” 24” 24” 24” 24”

6” 6” 6” 6” 6” 6” 6” 6” 6” 6”

3” 3” 3” 3” 3” 3” 3” 3” 3” 3’

SUG. RETAIL $239.95 239.95 239.95 239.95 239.95 279.95 279.95 279.95 279.95 279.95

0601-2298

PART # BLACK 0601-2294 0601-2296 0601-2298 0601-2300 0601-2302 0601-2304 0601-2306 0601-2308 0601-2310 0601-2312

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

4” Narrow Z 6” Narrow Z 8” Narrow Z 10” Narrow Z 12” Narrow Z 4” Web Z 6” Web Z 8” Web Z 10” Web Z 12” Web Z

4” 6” 8” 10” 12” 4” 6” 8” 10” 12”

24” 24” 24” 24” 24” 24” 24” 24” 24” 24”

6” 6” 6” 6” 6” 6” 6” 6” 6” 6”

3” 3” 3” 3” 3” 3” 3” 3” 3” 3”

SUG. RETAIL $239.95 239.95 239.95 239.95 239.95 279.95 279.95 279.95 279.95 279.95

GASKETS & SEALS ELECTRICAL 0601-2265

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

11/4”

TWIN PEAKS TOURING HANDLEBARS

0601-2270

•Handlebars with an emphasis on touring comfort •More parallel wrist angles for a perfect pullback angle and stress-free riding •Flowing bends on the uprights designed specifically for Batwing fairing bikes •Drilled for internal wiring •Can be used on cable and TBW (Throttle By Wire) applications •Made in the U.S.A. FOR 96-13 FLHT/FLHX AND H-D FL TRIKES

PART # CHROME 0601-2265 0601-2267 0601-2269

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

14” Bagger 16” Bagger 18” Bagger

14” 16.5” 18”

33.5” 33.5” 33.5”

12” 12” 12”

5.25” 5.25” 5.25”

SUG. RETAIL $209.95 209.95 209.95

PART # DESCRIPTION BLACK POWDERCOAT 0601-2266 14” Bagger 0601-2268 16” Bagger 0601-2270 18” Bagger

END RISE

WIDTH

CENTER WIDTH

PULLBACK

14” 16.5” 18”

33.5” 33.5” 33.5”

12” 12” 12”

5.25” 5.25” 5.25”

SUG. RETAIL $209.95 209.95 209.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

70

0601-2287

1” OLD SCHOOL HANDLEBARS

0601-2282

•Made with high-strength 1” diameter steel tubing •TIG welded for strength; welds polished for seamless appearance •Drilled for internal wiring •Laser-cut web design adds style and strength •Made in the U.S.A. PART # CHROME 0601-2281 0601-2283 0601-2285 0601-2287 0601-2289 0601-2291

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

4” Narrow Z 4” Web Z 6” Web Z 8” Web Z 10” Web Z 12” Web Z

4” 4” 6” 8” 10” 12”

24” 24” 24” 24” 24” 24”

6” 6” 6” 6” 6” 6”

3” 3” 3” 3” 3” 3”

SUG. RETAIL

$134.95 174.95 174.95 174.95 174.95 174.95

0601-2292

PART # DESCRIPTION BLACK POWDERCOAT 0601-2282 4” Narrow Z 0601-2284 4” Web Z 0601-2286 6” Web Z 0601-2288 8” Web Z 0601-2290 10” Web Z 0601-2292 12” Web Z

All part numbers in BLUE are new for 2013.

END RISE

WIDTH

CENTER WIDTH

PULLBACK

4” 4” 6” 8” 10” 12”

24” 24” 24” 24” 24” 24”

6” 6” 6” 6” 6” 6”

3” 3” 3” 3” 3” 3”

SUG. RETAIL $134.95 174.95 174.95 174.95 174.95 174.95

SECTION

13

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

0601-2241

LUGGAGE 0601-2249

SEATS & SISSY BARS

0601-2245

EXHAUST FUEL/AIR SYSTEMS ENGINE

0601-2257

0601-2253 0601-2252

TRANSMISSION & DRIVELINE GASKETS & SEALS NYCC CURVES APE HANGER HANDLEBARS

•1” and 11/4” bars have 1” clamping area; 11/4” Thick bars have 11/4” diameter clamping area •11/4” Thick bars require special risers and clamps, see the 2013 FatBook™ •Dimpled and drilled for internal wiring •11/4” bars also feature 31/2” on-centering knurling •Made in the U.S.A.

ELECTRICAL LIGHTING

0601-2260

0601-2261

HANDLEBARS, CONTROLS & MIRRORS

1” HANDLEBARS PART # CHROME 0601-2241 0601-2243 0601-2245 0601-2247 BLACK 0601-2242 0601-2244 0601-2246 0601-2248 11/4” HANDLEBARS PART # CHROME 0601-2249 0601-2251 0601-2253 0601-2255 BLACK 0601-2250 0601-2252 0601-2254 0601-2256 11/4” THICK HANDLEBARS PART # CHROME 0601-2257 0601-2259 0601-2261 BLACK 0601-2258 0601-2260 0601-2262

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

8” 10” 14” 18”

8” 10” 14” 18”

32” 32” 32” 32”

8.5” 8.5” 8.5” 8.5”

7” 7” 7” 7”

$239.95 239.95 239.95 239.95

8” 10” 14” 18”

8” 10” 14” 18”

32” 32” 32” 32”

8.5” 8.5” 8.5” 8.5”

7” 7” 7” 7”

239.95 239.95 239.95 239.95

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

8” 10” 14” 18”

8” 10” 14” 18”

32” 32” 32” 32”

8.5” 8.5” 8.5” 8.5”

7” 7” 7” 7”

$259.95 259.95 259.95 259.95

8” 10” 14” 18”

8” 10” 14” 18”

32” 32” 32” 32”

8.5” 8.5” 8.5” 8.5”

7” 7” 7” 7”

259.95 259.95 259.95 259.95

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

12” 14” 18”

12” 14” 16”

32” 32” 32”

8.5” 8.5” 8.5”

7” 7” 7”

$259.95 259.95 259.95

HARDWARE, CHEMICALS & TOOLS

12” 14” 18”

12” 14” 16”

32” 32” 32”

8.5” 8.5” 8.5”

7” 7” 7”

259.95 259.95 259.95

COVERS, SECURITY & GENERAL

All part numbers in BLUE are new for 2013.

SUG. RETAIL

SUG. RETAIL

SUG. RETAIL

CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

71

SECTION

13

WINDSHIELDS & FAIRINGS TOURING 0601-2208

0601-2204

0601-2180

AUDIO & COMMUNICATION LUGGAGE

0601-2188

0601-2158

0601-2154

SEATS & SISSY BARS EXHAUST

0601-2198 0601-2174

FUEL/AIR SYSTEMS

0601-2194

ENGINE TRANSMISSION & DRIVELINE

0601-2168

0601-2160

0601-2164

GASKETS & SEALS ELECTRICAL 0601-2176

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

72

0601-2184 0601-2200

1” HANDLEBARS

•1” O.D. x 0.120” wall seamless 4130 chromoly tubing •All bends are created with internal mandrels on a CNC bender to reduce flat spots in the bends •All welded joints are precision mitered and TIG welded •Available in chrome or black electroplate finishes and either undimpled for aftermarket hand controls/custom applications or dimpled for stock OEM switches and levers •All T-Bar style bars have 3.5” on-center mounting points PART # CHROME 0601-2204 0601-2206 0601-2208 0601-2210 0601-2180 0601-2182 0601-2188 0601-2190 0601-2158 0601-2154 0601-2156 0601-2196 0601-2198 0601-2172 0601-2174 0601-2192 0601-2194 0601-2168 0601-2170 0601-2164 0601-2166 0601-2160 0601-2162 0601-2176 0601-2178 0601-2200 0601-2202 0601-2184 0601-2186

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

Zero Drag Zero Drag, dimpled Trackers Trackers, dimpled Moto Moto, dimpled Mustache Mustache, dimpled Clubman Keystones Keystones, dimpled Zed Zed, dimpled Window Window, dimpled Breezer Breezer, dimpled Chumps Chumps, dimpled Apes Apes, dimpled Frisco Frisco, dimpled Low Drag Low Drag, dimpled H-Bar H-Bar, dimpled High Drag High Drag, dimpled

0” 0” 1.75” 1.75” 4.25” 4.25” 3” 3” 4.75” 5” 5” 6” 6” 8” 8” 8” 8” 8” 8” 12” 12” 7” 7” 3.75” 3.75” 8” 8” 7” 7”

24” 24” 30” 30” 30.25” 30.25” 26” 26” 29” 28” 28” 23” 23” 27.5” 27.5” 36” 36” 30” 30” 32” 32” 29” 29” 25.5” 25.5” 22.5” 22.5” 25.5” 25.5”

6” 6” 6.5” 7” 7” 6” 6” 6.5” 6.5” 4.75” 4.75” 6” 6” -

2” 2” 2.75” 2.75” 3.25” 3.25” 5.25” 5.25” 6” 2.5” 2.5” 4” 4” 2.125” 2.125” 6” 6” 7” 7” 9.25” 9.25” .875” .875” 3” 3” 3” 3” 3.5” 3.5”

All part numbers in BLUE are new for 2013.

SUG. RETAIL $79.95 79.95 79.95 79.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95

SECTION

13

WINDSHIELDS & FAIRINGS

1” HANDLEBARS (CONT)

TOURING 0601-2179

0601-2203

0601-2207

AUDIO & COMMUNICATION LUGGAGE

0601-2189 0601-2155

SEATS & SISSY BARS

0601-2157

EXHAUST

0601-2173 0601-2197

FUEL/AIR SYSTEMS ENGINE

0601-2193

TRANSMISSION & DRIVELINE

0601-2167 0601-2161

GASKETS & SEALS

0601-2163

ELECTRICAL LIGHTING 0601-2183

0601-2175 0601-2199 PART # BLACK 0601-2203 0601-2205 0601-2207 0601-2209 0601-2179 0601-2181 0601-2187 0601-2189 0601-2157 0601-2153 0601-2155 0601-2195 0601-2197 0601-2171 0601-2173 0601-2191 0601-2193 0601-2167 0601-2169 0601-2163 0601-2165 0601-2159 0601-2161 0601-2175 0601-2177 0601-2199 0601-2201 0601-2183 0601-2185

HANDLEBARS, CONTROLS & MIRRORS CABLES

DESCRIPTION

END RISE

WIDTH

CENTER WIDTH

PULLBACK

Zero Drag Zero Drag, dimpled Trackers Trackers, dimpled Moto Moto, dimpled Mustache Mustache, dimpled Clubman Keystones Keystones, dimpled Zed Zed, dimpled Window Window, dimpled Breezer Breezer, dimpled Chumps Chumps, dimpled Apes Apes, dimpled Frisco Frisco, dimpled Low Drag Low Drag, dimpled H-Bar H-Bar, dimpled High Drag High Drag, dimpled

0” 0” 1.75” 1.75” 4.25” 4.25” 3” 3” 4.75” 5” 5” 6” 6” 8” 8” 8” 8” 8” 8” 12” 12” 7” 7” 3.75” 3.75” 8” 8” 7” 7”

24” 24” 30” 30” 30.25” 30.25” 26” 26” 29” 28” 28” 23” 23” 27.5” 27.5” 36” 36” 30” 30” 32” 32” 29” 29” 25.5” 25.5” 22.5” 22.5” 25.5” 25.5”

6” 6” 6.5” 7” 7” 6” 6” 6.5” 6.5” 4.75” 4.75” 6” 6” -

2” 2” 2.75” 2.75” 3.25” 3.25” 5.25” 5.25” 6” 2.5” 2.5” 4” 4” 2.125” 2.125” 6” 6” 7” 7” 9.25” 9.25” .875” .875” 3” 3” 3” 3” 3.5” 3.5”

All part numbers in BLUE are new for 2013.

SUG. RETAIL $79.95 79.95 79.95 79.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95 99.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

73

SECTION

13

WINDSHIELDS & FAIRINGS TOURING 0601-2232

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 0601-2236

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

0601-2240

11/2 STRIP HANDLEBARS

•Available in chrome, gloss black or flat black finish •Feature 11/2” clamping area •Polished welds •Slotted for internal wiring •Notched for electronic throttle •Require special risers and clamps, see the HANDLEBARS, CONTROLS & MIRRORS section in the 2013 FatBook™ •Not for use with hydraulic clutches •Made in the U.S.A. PART # 0601-2232 0601-2233 0601-2234 0601-2235 0601-2236 0601-2237 0601-2238 0601-2239 0601-2240

DESCRIPTION Chrome Gloss black Flat black Chrome Gloss black Flat black Chrome Gloss black Flat black

END RISE 10” 10” 10” 12” 12” 12” 17” 17” 17”

WIDTH 32” 32” 32” 32” 32” 32” 35” 35” 35”

CENTER WIDTH 9” 9” 9” 9” 9” 9” 9” 9” 9”

PULLBACK 5” 5” 5” 5” 5” 5” 5” 5” 5”

SUG. RETAIL $299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95 299.95

PULLBACK 3” 3”

SUG. RETAIL $149.95 149.95

LIGHTING 0601-2118

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES

1” SCRAMBLER HANDLEBARS

•Turns an asphalt-bound bike into a road terror that’s still comfortable •Provides just enough height to fit the reach on most H-D models •Reuses stock cables and brake lines •Drilled for internal wiring •Available in chrome or black powder-coat finishes •Made in the U.S.A. PART # 0601-2118 0601-2119

DESCRIPTION Black Chrome

RISE 6” 6”

0601-2119

WIDTH 33.5” 33.5”

FRAMES, SUSPENSION & FENDERS 0601-2120

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

74

0601-2121

1” CLUBMAN HANDLEBARS

•Specifically shaped to transform a Sportster into a corner-eating Cafe Racer •Drilled and slotted for internal wiring with capped ends •May require shorter cables and brake lines •Available in black powder-coat or chrome finishes •Made in the U.S.A. PART # 0601-2120 0601-2121

DESCRIPTION Black Chrome

RISE -3” -3”

WIDTH 27.4” 27.4”

All part numbers in BLUE are new for 2013.

PULLBACK 4.4” 4.4”

SUG. RETAIL $139.95 139.95

SECTION

13

WINDSHIELDS & FAIRINGS 0602-0591

TOURING

0602-0594

AUDIO & COMMUNICATION

0602-0588

0602-0587

LUGGAGE SEATS & SISSY BARS 0602-0600

0602-0603

EXHAUST

0602-0608 0602-0604

FUEL/AIR SYSTEMS

HANDLEBAR RISER/TOP CLAMP KITS

•Machined from billet aluminum with a chrome or black powder-coat finish •Fit any handlebars that have a 1” diameter or 11/2” in the clamping area •Sold as a kit of two risers, top clamp and hardware •Risers are tapped for 1/2”-13 bolts •Made in the U.S.A. FOR HANDLEBARS WITH 1” CLAMPING AREA SUG. PART # DESCRIPTION RETAIL PART # CHROME BLACK 0602-0586 0602-0587 3” tall $149.95 0602-0588 4” tall 159.95 0602-0589 0602-0590 0602-0591 51/2” tall (w/ 1” pullback) 179.95 0602-0592 6” tall 159.95 0602-0593 0602-0594 91/2” tall (w/ 0602-0595 1” pullback) 229.95 0602-0596 10” tall 299.95 0602-0597 0602-0598 12” tall 329.95 0602-0599

DESCRIPTION 3” tall 4” tall 51/2” tall (w/ 1” pullback) 6” tall 91/2” tall (w/ 1” pullback) 10” tall 12” tall

SUG. RETAIL $149.95 159.95 179.95 159.95

0602-0607

ENGINE

FOR HANDLEBARS WITH 11/2” CLAMPING AREA SUG. PART # DESCRIPTION RETAIL PART # CHROME BLACK 0602-0600 11/2” tall $139.95 0602-0601 0602-0602 3” tall 159.95 0602-0603 0602-0604 4” tall 164.95 0602-0605 1 0602-0606 5 /2” tall (w/ 0602-0607 1” pullback) 199.95 0602-0608 6” tall 174.95 0602-0609

DESCRIPTION 11/2” tall 3” tall 4” tall 51/2” tall (w/ 1” pullback) 6” tall

SUG. RETAIL $139.95 159.95 164.95 199.95 174.95

229.95 249.95 274.95

CABLES 0602-0630

DESCRIPTION

SUG. RETAIL

1.5” tall 3” tall 4” tall 5.5” tall (w/ 1” pullback) 6” tall

$134.95 154.95 169.95 194.95 179.95

0602-0625

0602-0629

BRAKES

PART # BLACK 0602-0623 0602-0625 0602-0627 0602-0629 0602-0631

DESCRIPTION

SUG. RETAIL

1.5” tall 3” tall 4” tall 5.5” tall (w/ 1” pullback) 6” tall

$134.95 154.95 169.95 194.95 179.95

•Fit handlebars with 1” clamping area •CNC-machined from billet aluminum •Bright chrome or gloss black powdercoat finish •Risers are drilled and tapped for 1/2”-13 mounting bolts (sold separately) •Sold in pairs •Made in the U.S.A.

1.5” tall 3” tall 4” tall 5.5” tall (w/ 1” pullback) 6” tall

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

SOLID HANDLEBAR RISER/TOP CLAMP KITS

DESCRIPTION

ELECTRICAL

HANDLEBARS, CONTROLS & MIRRORS

•Fit handlebars with 11/4” clamping area •Show chrome or gloss black finish •Sold as a kit of two risers and top clamp •Risers have 1/2”-13” threads •Made in the U.S.A.

PART # CHROME 0602-0612 0602-0614 0602-0616 0602-0618 0602-0620

GASKETS & SEALS

LIGHTING

HEFTY HANDLEBAR RISER/TOP CLAMP KITS

PART # CHROME 0602-0622 0602-0624 0602-0626 0602-0628 0602-0630

TRANSMISSION & DRIVELINE

FOOTRESTS & LICENSE PLATE FRAMES

0602-0613 0602-0616

SUG. RETAIL $134.95 154.95 169.95 194.95 179.95

WHEELS & AXLES

0602-0618

PART # BLACK 0602-0613 0602-0615 0602-0617 0602-0619 0602-0621

All part numbers in BLUE are new for 2013.

DESCRIPTION 1.5” tall 3” tall 4” tall 5.5” tall (w/ 1” pullback) 6” tall

SUG. RETAIL $134.95 154.95 169.95 194.95 179.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

75

SECTION

13

WINDSHIELDS & FAIRINGS TOURING

0602-0568

AUDIO & COMMUNICATION

0602-0570

0602-0569

LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

0602-0567

13/4” SLIMLINE RISERS

2” THUNDER RISERS

•Investment-cast stainless steel construction •Fit bars with 1” diameter in clamping area •43/8” wide with 2” rise •31/2 on-center mounting holes accept 1/2” x 13 mounting hardware •Include stainless top clamp hardware •Available in raw polished or black electroplated finish

•Investment-cast stainless steel construction •Fit bars with 1” diameter in clamping area •Low profile 1.75” rise •Bottom clamps accept stock 1/2” x 13 mounting hardware •5/16” -18 stainless steel Allen cap handlebar clamp screws •Available in raw polished or black electroplate finish •Sold in pairs

PART # 0602-0569 0602-0570

PART # 0602-0567 0602-0568

DESCRIPTION Raw polished Black electroplate

SUG. RETAIL $139.95 139.95

DESCRIPTION Raw polished Black electroplate

SUG. RETAIL $94.95 94.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

11/4” HANDLEBAR RISERS

0602-0578

•Quality billet aluminum construction •Necessary when upgrading from handlebars that have a 1” clamping area to bars with a 11/4” clamping area •Fits under stock covers utilizing stock mounting height •Includes both top and bottom raw risers halves •Made in the U.S.A.

PART # 0602-0566

DESCRIPTION For 98-13 FLTR

RISER EXTENSIONS

SUG. RETAIL $99.95

LIGHTING

CABLES 0602-0571

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

76

•The simple solution to adding a little rise to your handlebars and/or risers •Two rises available: 1” or 11/2” •Machined finish solid brass or black finish •Sold in pairs •Made in the U.S.A. PART # FOR 1” HANDLEBARS 0602-0578 0602-0579 FOR 11/4” HANDLEBARS 0602-0580 0602-0581 FOR 11/2” HANDLEBARS 0602-0582 0602-0610 0602-0583 0602-0611

HANDLEBARS, CONTROLS & MIRRORS

BRAKES

0602-0611

0602-0573

DESCRIPTION

SUG. RETAIL

1” rise, brass 11/2” rise, brass

$64.95 64.95

1” rise, brass 11/2” rise, brass

64.95 64.95

1” rise, brass 1” rise, black 11/2” rise, brass 11/2” rise, black

74.95 49.95 74.95 49.95

0602-0575

0602-0572

ANGLED RISER BUSHING KITS

•Change the angle of your risers or T-Bars without having to install a different set of triple trees •Built-in 5° or 10° angle; can be installed to face toward or away from the rider •Angle the risers toward you for increased pullback and a more comfortable riding position •Angle the risers away from you for a custom chopper look without the expense of raking out the front end or switching your handlebars •Machined from 6061 T-6 billet aluminum with a chrome or gloss black finish; also available in solid brass with a machined finish •Made in the U.S.A. NOTE: Check handlebar clearance before operating.

FOR MOST 84-13 FXST, FLST (EXCEPT FXSTD), 91-13 FXD (EXCEPT 11-13 FXS, 08-13 FXDB), 86-94 FXR AND 86-03 XL PART # DESCRIPTION 5° ANGLE 0602-0571 Brass 10° ANGLE 0602-0572 Chrome 0602-0573 Gloss black 0602-0574 Brass

SUG. RETAIL $129.95 94.95 89.95 129.95

0602-0576

SOLID RISER BUSHINGS

0602-0577

•Rigid mount your handlebars with these precision CNC-machined bushings •Aluminum bushings available with a chrome or gloss black finish •Brass bushings have a machine finish •Sold as a set of four •Made in the U.S.A. PART # DESCRIPTION FOR MOST 84-13 FXST, FLST (EXCEPT FXSTD), 91-13 FXD (EXCEPT 11-13 FXS, 08-13 FXDB), 86-94 FXR AND 86-03 XL 0602-0575 Chrome 0602-0576 Gloss black 0602-0577 Brass

All part numbers in BLUE are new for 2013.

SUG. RETAIL

$79.95 49.95 119.95

SECTION

13

WINDSHIELDS & FAIRINGS TOURING

0612-0326

0610-0682

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS 0612-0324 0612-0319

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

2106-0189 2106-0207

CONTOUR BILLET HANDLEBAR CONTROLS

GASKETS & SEALS

•CNC-machined in billet aluminum and available in black, chrome, Black Ops™ or Contrast Cut™ finishes •Hydraulic brake master cylinder comes in 9/16” or 11/16” bore size •Hydraulic clutch master cylinder is available in 11/16” bore size •Cable-actuated clutch control works with stock cable •07-13 style clutch controls accept start interrupt switch (sold separately) •Brake light switches are not included and must be purchased separately •Contrast Cut™ starts with a polished hand control that has been black anodized, then recut to open up the design •Black Ops finish features a gloss black on top of a contrasting textured black for the toughest, best looking finish yet •Made in the U.S.A. PART # DESCRIPTION 11/16” BORE HYDRAULIC CLUTCH CONTROL (07-13 STYLE) 0612-0325 Black Contrast Cut 0612-0326 0612-0327 Chrome 0612-0328 Black Ops 11/16” BORE HYDRAULIC CLUTCH CONTROL (96-06 STYLE) 0610-0683 Black Ops 11/16” BORE HYDRAULIC BRAKE CONTROL (DUAL CALIPER) 0610-0682 Black Ops CABLE ACTUATED CLUTCH LEVER ASSEMBLY (07-13 STYLE) 0612-0323 Black 0612-0324 Chrome

SUG. RETAIL $369.95 369.95 369.95 369.95 369.95 369.95 269.95 269.95

PART # DESCRIPTION REPLACEMENT LEVERS 0612-0317 Hydraulic brake, black 0612-0318 Hydraulic brake, chrome 0612-0319 Cable clutch, black 0612-0320 Cable clutch, chrome 0612-0321 Hydraulic clutch, black 0612-0322 Hydraulic clutch, chrome START INTERRUPTION SWITCH 2106-0206 Black 2106-0207 Chrome BRAKE LIGHT SWITCH 2106-0189 Cable 2106-0190 Hydraulic

ELECTRICAL LIGHTING SUG. RETAIL $89.95 89.95 89.95 89.95 89.95 89.95 57.95 57.95 8.95 34.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

CHROME TRIGGER LEVERS

•Design allows the forefinger to get a real grip, which makes it easier and more comfortable to pull the lever •Lever backside is dished •Hand falls naturally into place •Ideal for riders with smaller hands •Sold in sets of one clutch and one brake lever PART # 0610-0701

DESCRIPTION For 82-95 models

SUG. RETAIL $69.95

All part numbers in BLUE are new for 2013.

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

77

SECTION

13

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE

REPLACEMENT RUBBER INSERTS FOR RAZOR GRIPS

REPLACEMENT RUBBER SLEEVES FOR RIPTIDE GRIPS

•Razor grip replacement inserts for Razor grips PART #s 0630-1136/-1137/-1138/-1139 •Sold in a set for two grips

PART # 0630-1289

DESCRIPTION Repl. inserts for Razor grips

•Replacement rubber sleeves for Riptide grip PART #s 0630-0012/-1133/-1134/-1135 •Sold in pairs SUG. RETAIL $13.95

PART # 0630-1288

DESCRIPTION Repl. rubber sleeves for Riptide grips

SUG. RETAIL $9.95

SEATS & SISSY BARS 0630-1292

EXHAUST FUEL/AIR SYSTEMS ENGINE

0630-1291

0630-1258

0630-1257

KUNG FU GRIPS

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

•Injection-molded Krayton synthetic rubber •Classic mushroom surface design isolates shock and channels moisture for comfort and performance •Available in black or natural for 1” handlebars •Sold in pairs; throttle sleeve not included PART # FOR 1” HANDLEBARS 0630-1257 0630-1258

DESCRIPTION

0630-1294 0630-1295

SUG. RETAIL

Black Natural

$17.95 17.95

0630-1298

THROTTLE HOUSINGS

•Available for TBW and dual threaded cable style setups •Your choice of chrome or black anodized finishes •Made in the U.S.A. PART # DESCRIPTION FOR 08-13 FLHT, FLHT, FLHX, FLTR MODELS 0632-0553 Chrome 0632-0552 Black anodized

SUG. RETAIL

$89.95 89.95

0632-0588

0632-0553

0632-0550

SUG. PART # DESCRIPTION RETAIL FOR 84-95 MODELS W/ DUAL-CABLE THREAD-IN CABLES 0632-0551 Chrome $89.95 0632-0550 Black anodized 89.95

0632-0587

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

78

0632-0585

0632-0586

0630-1299

GRIPS

•Made from 6061 T-6 aluminum available in chrome or black accent finish •Clutch side grip has hidden double mounting system •Three styles to choose from •Made in the U.S.A. PART # DESCRIPTION SUG. RETAIL FOR 84-13 MODELS (EXCEPT 08-13 DRESSERS AND H-D FL TRIKES) 0630-1290 Bullet, chrome $169.95 0630-1291 Bullet, black 169.95 0630-1294 Yafterburner, chrome 169.95 0630-1295 Yafterburner, black 169.95 0630-1298 Speed Freak™, chrome 169.95 0630-1299 Speed Freak™, black 169.95 FOR 08-13 FLHT/FLHR/FLTR/FLHX AND H-D FL TRIKES 0630-1292 Bullet, chrome 169.95 0630-1293 Bullet, black 169.95 0630-1296 Yafterburner, chrome 169.95 0630-1297 Yafterburner, black 169.95 0630-1300 Speed Freak™, chrome 169.95 0630-1301 Speed Freak™, black 169.95

WHISKEY THROTTLE ASSEMBLY

•CNC-machined 6061 T-6 aluminum clamshell and throttle tube •Includes chrome-plated steel cable ferrules and plated Allen cap clamshell mounting hardware •Available in two styles: single cable for custom applications or dual cable for retrofitment on OEM push/pull throttle cable assemblies •Cable ferrules included with both styles are designed to fit stock H-D thread-in and clip-in cables •Throttle grip tube is machined to accept rubber motorcycle grips PART # DESCRIPTION SINGLE CABLE 0632-0588 Stainless steel 0632-0587 Black

SUG. RETAIL $99.95 99.95

PART # DESCRIPTION DUAL CABLE 0632-0586 Stainless steel 0632-0585 Black

SUG. RETAIL $99.95 99.95

WHISKEY THROTTLE TUBE

•CNC-machined 6061 T-6 aluminum throttle tube •Allows owners to replace the thick, generally uncomfortable stock molded one-piece grips with soft aftermarket grips •The CNC-machined cable channel has barrel openings for two cables PART # 0632-0589

All part numbers in BLUE are new for 2013.

DESCRIPTION Throttle tube

SUG. RETAIL $49.95

SECTION

13

WINDSHIELDS & FAIRINGS 0640-0732

0640-0729

0640-0725

0640-0728

TOURING AUDIO & COMMUNICATION

VISION SERIES MIRRORS

•Made from forged 6061 T-6 aluminum •Ambidextrous stems can be used in right and left side applications •High-quality, scratch-resistant mirror lens •Will mount to PM and stock hand controls, as well as most aftermarket controls •Include chrome-plated 5/16”-18 x 11/2” and 5/16”-18 x 11/4” GRADE 8 bolts •Include 3/4” spacer for multiple height options •Vibration tested •Sold each •Made in the U.S.A. PART # CHROME 0640-0726 0640-0732 0640-0728 0640-0730

DESCRIPTION

SUG. RETAIL

Arrow (41/2” x 21/5”) Arrow XL (49/10” x 27/10”) Blade (42/5” x 14/5”) Oval (44/5 x 21/10”)

$69.95 69.95 69.95 69.95

LUGGAGE 0640-0733

SEATS & SISSY BARS

PART # DESCRIPTION SUG. RETAIL CHROME (CONT) 4 0640-0734 Round (2 /5” round) $69.95 CONTRAST CUT™ 0640-0725 Arrow (41/2” x 21/5”) 69.95 0640-0731 Arrow XL (49/10” x 27/10”) 69.95

PART # DESCRIPTION CONTRAST CUT™ (CONT) 0640-0727 Blade (42/5” x 14/5”) 0640-0729 Oval (44/5” x 21/10”) 0640-0733 Round (24/5” round)

SUG. RETAIL

EXHAUST

$69.95 69.95 69.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS

CHROME OVAL MIRRORS

0640-0741

•Economical die-cast construction 0640-0738 •Chrome plated •Mirror heads measure 31/2” x 2” •Fit right or left side •Include all necessary hardware to fit just about any custom or stock Harley •Sold each PART # 0640-0738 0640-0741 0640-0746

ELECTRICAL

0640-0746

DESCRIPTION Flame style; 8” long, 4” high Gothic style; 61/2” long, 4” high Smooth style: Long stem measures 5” long and 4” high; short stem measures 33/4” long and 3” high

SUG. RETAIL $54.95 54.95 54.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

0640-0739

BRAKES

0640-0743

SCIMITAR HEAD MIRRORS

0640-0744

•Economical die-cast construction •Chrome plated •Include all necessary hardware to fit just about any custom or stock Harley •Mirror heads measure 51/2” x 2” •Sold each PART # 0640-0739 0640-0740 0640-0743 0640-0742

DESCRIPTION Flame stem left; 8” long x 4” high Flame stem right; 8” long x 4” high Gothic stem left; 61/2” long x 4” high Gothic stem right; 61/2” long x 4” high

SUG. RETAIL $54.95 54.95 54.95 54.95

PART # 0640-0744 0640-0745

DESCRIPTION Smooth stem left; Long stem measures 5” long x 4” high; short stem measures 33/4” long x 3” high Smooth stem right; Long stem measures 5” long x 4” high; short stem measures 33/4” long x 3” high

TANKS & OIL FILTERS

SUG. RETAIL $54.95 54.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

MINI MIRRORS

•Economical die-cast construction •Fit right or left side •Milled mirror head measures 41/2” L x 11/2” H •Blade mirror head measures 5” L x 3” H •Both styles include two stems: long stem measures 5” L and 4” H; short stem measures 33/4” L and 3” H •Include all necessary hardware •Sold each PART # 0640-0736

DESCRIPTION Milled

SUG. RETAIL $54.95

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

0640-0736 0640-0737 PART # 0640-0737

All part numbers in BLUE are new for 2013.

DESCRIPTION Blade

SUG. RETAIL $54.95

COVERS, SECURITY & GENERAL

79

SECTION

14

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING DRAG SPECIALTIES BRAIDED HIGH EFFICIENCY (H.E.) CLUTCH CABLES

HANDLEBARS, CONTROLS & MIRRORS CABLES

•Low effort, maximum efficiency cable design meets or exceeds all OEM specifications for fitment, construction and endurance requirements •Cables feature chrome-plated fittings, stainless-steel upper housing, high-performance longitudinal housing and inner sleeve for superior compression resistance, smoother operation and lighter pull •Lower housing from adjuster down is made from a black, high-temperature resistant material for long life •Black high-temperature resistant housing blends into gloss-black frame for a clean look •Braiding is coated with a non-yellowing clear coating for abrasion resistance •Available in undersize/standard/oversize lengths for most models

HOW TO MEASURE CLUTCH CABLES NOTE: Late-style cables are measured with the adjuster completely collapsed.

BRAKES

NOTE: Adjuster length measured from bottom of cable.

STOCK LENGTH BRAIDED CLUTCH CABLES

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

80

FITS MODEL FOR DRESSERS 08-13 FLHR 08-13 FLHRC 08-11 FLHRSE 08-13 FLHT 08-11 FLHTC 08-13 FLHTCU 10-13 FLHTCUTG 08-13 FLTR 08-13 FLHX

PART #

HOUSING LENGTH

ADJUSTER LOCATION FROM TRANS

INNER CABLE TRAVEL

OEM PART #

0652-1490 0652-1490 0652-1490 0652-1490 0652-1490 0652-1490 0652-1490 0652-1490 0652-1490

6215/16” 6215/16” 6215/16” 6215/16” 6215/16” 6215/16” 6215/16” 6215/16” 6215/16”

257/16” 257/16” 257/16” 257/16” 257/16” 257/16” 257/16” 257/16” 257/16”

31/2” 31/2” 31/2” 31/2” 31/2” 31/2” 31/2” 31/2” 31/2”

38667-08A 38667-08A 38667-08A 38667-08A 38667-08A 38667-08A 38667-08A 38667-08A 38667-08A

ALTERNATIVE LENGTH BRAIDED CLUTCH CABLES FOR CUSTOM HEIGHT/WIDTH HANDLEBARS PART # HOUSING LENGTH FOR 08-13 DRESSERS 0652-1528 50” 0652-1496 6015/16” 0652-1491 6415/16” 0652-1492 6615/16” 0652-1493 6815/16”

ADJUSTER LOCATION

INNER CABLE TRAVEL

251/2” 257/16” 257/16” 257/16” 257/16”

31/2” 37/8” 37/8” 37/8” 37/8”

PART # HOUSING LENGTH FOR 08-13 DRESSERS (CONT) 0652-1494 7015/16” 0652-1495 7215/16” 0652-1530 80” 0652-1562 80”

ADJUSTER LOCATION

INNER CABLE TRAVEL

257/16” 257/16” 251/2” 257/16”

37/8” 37/8” 31/2” 31/8”

PRICE LIST PART # 0652-1490 0652-1491 0652-1492

SUG. RETAIL $64.95 64.95 65.95

PART # 0652-1493 0952-1494 0652-1495

SUG. RETAIL $65.95 65.95 65.95

PART # 0652-1496 0652-1528 0652-1530

All part numbers in BLUE are new for 2013.

SUG. RETAIL $64.95 67.95 68.95

PART # 0652-1562

SUG. RETAIL $68.95

SECTION

14

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST Stainless

FUEL/AIR SYSTEMS

Black

CAFE HANDLEBAR CABLE AND BRAKE LINE KITS

•Kits give you the correct length cables and brake lines you need so you can complete a handlebar swap, install the new cables/brake lines and ride •Cafe kits are shorter than stock for bikes using clip-ons or clubman-style handlebars •Stainless braided kits include throttle cable, idle cable, clutch cable, brake line, banjo bolts, fittings and copper crush washers •Black vinyl/stainless kits include black vinyl throttle and idle cables, black vinyl clutch cable and black stainless brake line with chrome fittings, banjo bolts and crush washers •Made in the U.S.A. PART # DESCRIPTION STAINLESS BRAIDED KITS 0610-0699 For 07-13 XL (single disc) 0610-0697 For 04-06 XL (single disc) 0610-0695 For 99-03 XL (single disc)

Chrome

SUG. RETAIL $309.95 309.95 309.95

PART # BLACK VINYL/STAINLESS 0610-0700 0610-0698 0610-0696

DESCRIPTION KIT For 07-13 XL (single disc) For 04-06 XL (single disc) For 99-03 XL (single disc)

SUG. RETAIL $219.95 219.95 219.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

Black

LIGHTING

0658-0074

0658-0078

0658-0075

DIE-CAST CABLE CLAMPS

CLUTCH CABLE CLAMPS

CABLES

•Economical alternative to billet clamps •Black finish •Available for throttle/idle cable and for clutch cable applications; sold each

•Machined from billet aluminum •Show chrome or gloss black finish •Sold each •Made in the U.S.A. PART # CHROME 0658-0084 0658-0081 BLACK 0658-0085 0658-0083 0658-0082

HANDLEBARS, CONTROLS & MIRRORS

DESCRIPTION

SUG. RETAIL

For 49mm fork tube For 39mm fork tube

$32.95 32.95

For 49mm fork tube For 41mm fork tube For 39mm fork tube

32.95 32.95 32.95

PART # THROTTLE/IDLE CABLE CLAMPS 0658-0074 0658-0076 CLUTCH CABLE CLAMPS 0658-0075 0658-0077 0658-0078 0658-0079

DESCRIPTION

SUG. RETAIL

Dual cable, 1” Dual cable, 11/4

$12.95 15.95

1” 11/4” 13/8” 11/2”

12.95 12.95 15.95 15.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

2120-0562

WIRING CAGE CLAMP

•Excellent for joining multiple wires together (max 5 24awg wires per port) •Spring clip connector retention •Tin over copper contact finish •Stainless steel contact material •Current rating of 20A •RoHS compliant PART # 2120-0562

DESCRIPTION 3-spot

SUG. RETAIL $7.95

2120-0561

WHEELS & AXLES

SPEEDO CABLE GUIDE, UNIVERSAL FIT

•Fits any fender •Machined from solid billet aluminum •Available in chrome •Mounting hardware included

PART # 2120-0561

DESCRIPTION 5-spot

SUG. RETAIL $9.95

All part numbers in BLUE are new for 2013.

PART # 0658-0080

DESCRIPTION Chrome

SUG. RETAIL $24.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

81

SECTION

15

WINDSHIELDS & FAIRINGS

Klassic

Mesh

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

POLISHED STAINLESS STEEL BRAKE ROTORS

•Constructed of 430 stainless steel and polished to a mirror-like finish •11.5” or 11.8” in diameter FRONT ROTORS PART # DESCRIPTION SUG. RETAIL FOR 00-13 H-D (EXCEPT 08-13 DRESSERS/H-D FL TRIKE, FXSTS/SB, FLSTSB/FLSTSC, V-ROD, 06-13 DYNA MODELS) 1710-2023 Klassic 11.5” $129.95 1710-2025 Mesh 11.5” 129.95 FOR 08-13 FLHT, FLHR, FLHX, FLTR, H-D FL TRIKE, 06-13 DYNA MODELS 1710-2027 Klassic 11.8” rotor 149.95

REAR ROTORS PART # DESCRIPTION FOR 00-13 H-D (EXCEPT DRESSERS/H-D FL TRIKE) 1710-2024 Klassic 11.5” 1710-2026 Mesh 11.5” FOR 08-13 FLHT, FLHR, FLHX, FLTR MODELS 1710-2028 Klassic 11.8”

SUG. RETAIL $129.95 129.95 149.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

4-PISTON SINGLE-DISC FRONT BRAKE CALIPERS

•CNC-machined in-house to exact tolerances for superior performance and function •Stylish finish that really sets your bike apart •Direct bolt-on design •Available in a chrome or gloss black finish •Sold each •Made in the U.S.A. PART # DESCRIPTION FOR 00-13 SOFTAIL AND DYNA MODELS (C-CALIPER) 1701-0497 Chrome

1701-0497 1701-0498 SUG. RETAIL $399.95

PART # DESCRIPTION FOR 00-13 SOFTAIL AND DYNA MODELS (C-CALIPER) (CONT) 1701-0498 Gloss black

SUG. RETAIL $380.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

82

MILLENIUM SERIES 4-PISTON REAR CALIPERS

1701-0499

1701-0500

•6061 T-6S billet aluminum construction in a smooth design with a choice of chrome or black finish •Uses four 11/4” diameter centerless ground, anodized pistons

PART # DESCRIPTION FOR L87-99 FXST/C, FLST/C/N/F (M-CALIPER) 1701-0499 Smooth chrome

SUG. RETAIL $399.95

PART # DESCRIPTION FOR L87-99 FXST/C, FLST/C/N/F (M-CALIPER) (CONT) 1701-0500 Smooth black

All part numbers in BLUE are new for 2013.

SUG. RETAIL $342.95

SECTION

15

WINDSHIELDS & FAIRINGS TOURING DP BRAKES SDP SPORT HH+ SINTERED METAL BRAKE PADS

AUDIO & COMMUNICATION

•Feature the industry-high, HH+ friction rating •Provide superior stopping power with no mileage penalty •Gray-colored aluminum oxide-based ceramic material on backplate of pad keeps heat away from caliper piston and fluid in extreme conditions for fade-free performance •Quick pad break-in time so you get maximum stopping power fast •Quiet and dust-free

LUGGAGE

NOTE: DP Brakes brake pads are not for use with polished rotors.

FITS MODEL FRONT BRAKE PADS For 08-13 FLHT/FLHR/FLTR/FLHX/H-D FL Trikes For 05-07 Big Twin (all except FLSTS/FXSTS) For 06-13 V-Rod For 05 V-Rod

OEM #

SDP SPORT HH+ PART #

41854-08 44082-00C 42897-06A/08 44082-00C

1721-1730 1721-1729 1721-1730 1721-1729

FITS MODEL REAR BRAKE PADS For 08-13 FLHT/FLHR/FLTR/FLHX (except H-D FL Trike) For 05-07 Big Twin (all except 06-07 FXST, 07 FLSTF)

OEM #

SDP SPORT HH+ PART #

41852-08 44082-00C

1721-1730 1721-1729

SEATS & SISSY BARS

SUG. RETAIL $48.95 48.95 48.95 48.95

EXHAUST FUEL/AIR SYSTEMS

SUG. RETAIL $48.95 48.95

ENGINE

New NRS hook-bonding method

TRANSMISSION & DRIVELINE GASKETS & SEALS

1721-1494

ELECTRICAL LIMITED EDITION CHROMED SEMI-SINTERED “VLD” BRAKE PADS

LIGHTING

•All-new limited edition semi-sintered pad compound bonded to a chrome-plated steel backing plate using the new NRS hook-bonding methods •This pad compound combines the long life of a sintered pad with the great feel and lack of rotor damage common with sintered pads •Can be used to replace Kevlar® or sintered metal compound pads FITS MODEL FRONT BRAKE PADS For 08-13 FLD, FXD, FXDC, FXDF, FXDWG, FXDB, FXDL For 08-13 FLS, FXS, FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FLSTFB, FXCW/C For 08-13 FLHT/C/CU/K, FLHR/C, FLTR/X, FLHX, H-D FL Trike For 00-07 Big Twin models (except FLSTSC/FXSTS) For 06-13 V-Rod For 02-05 V-Rod For 00-03 XL (all) REAR BRAKE PADS For 06-07 FXST, FXSTB, FXSTC, FXSTS, 07 FLSTF For 08-13 FLD, FXD, FXDC, FXDF, FXDWG, FXDB, FXDL For 08-13 FLS, FXS, FXSTB, FXSTC, FLSTC, FLSTF, FLSTN, FLSTFB, FXCW/C For 08-13 FLHT, FLHR, FLHX, FLTR For 00-07 Big Twin (all except 06-07 FXST, 07 FLSTF) For 06-13 V-Rod For 02-05 V-Rod For 00-03 XL (all) AFTERMARKET CALIPERS Large 4-piston Performance Machine caliper 125 x 4R (0052-1602) 137 x 4B (0052-1602) 125 x 4RSPH (0052-1602)

OEM #

PART #

44082-08 44082-08 41854-08 44082-00/00C 42850-06A/B 44082-00/00C 44082-00

1721-1497 1721-1497 1721-1495 1721-1494 1721-1495 1721-1494 1721-1494

$54.95 54.95 50.95 50.95 50.95 50.95 50.95

46721-06 42298-08 42298-08 42897-08 44082-00/00C 42850-06/06A 44082-00/00C 44082-00

1721-1496 1721-1498 1721-1498 1721-1495 1721-1494 1721-1495 1721-1494 1721-1494

50.95 54.95 54.95 50.95 50.95 50.95 50.95 50.95

-

1721-1493 1721-1493 1721-1493 1721-1493

50.95 50.95 50.95 50.95

SUG. RETAIL

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

FRONT BRAKE MASTER CYLINDER COVERS

HARDWARE, CHEMICALS & TOOLS

•Chrome finish •Include gasket •Sold each PART # 0610-0684 0610-0686

DESCRIPTION For 84-95 Big Twin, 86-95 XL For 04-13 XL

SUG. RETAIL $14.95 29.95

0610-0684 All part numbers in BLUE are new for 2013.

0610-0686

COVERS, SECURITY & GENERAL

83

SECTION

15

WINDSHIELDS & FAIRINGS

Clear-coated Upper/lower line

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

Black vinyl-coated Upper/lower line

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

84

STANDARD LENGTH ABS STAINLESS STEEL BRAKE LINE KITS

•Feature clear-coated stainless steel or black vinyl-coated braided lines with chrome steel fittings •Meet DOT specifications •Rear lines come with chrome steel switch junction block and use standard brake light switch (unless noted) •Made in the U.S.A. NOTE: All measurements are approximate.

CLEAR-COATED STAINLESS STEEL PART # FITS MODEL FRONT BRAKE LINE KITS 1741-3763 For 12-13 FXS w/ ABS (upper) 1741-3775 For 12-13 FXS w/ ABS (lower) 1741-3785 For 12-13 FLD w/ ABS (upper/lower) 1741-3797 For 12-13 FXDB w/ ABS (upper/lower) 1741-3809 For 12-13 FXDC w/ ABS (upper/lower) 1741-3821 For 12-13 FXDF w/ ABS (upper/lower) 1741-3833 For 12-13 FXDWG w/ ABS (upper/lower) 1741-3845 For 12-13 FXDWG, FXDC, FXDB, FXDB, FLD (mid) (HCU/caliper to manifold) 1741-3847 For 12-13 FXDWG, FXDC, FXDB, FXDB, FLD (mid) (HCU/manifold to master cylinder) REAR BRAKE LINE KITS 1741-3849 For 08 FLHT/FLTR/FLHX w/o ABS 1741-3777 For 12-13 FXS, FLST (all) w/ ABS (master cylinder to HCU) 1741-3779 For 12-13 FXS, FLST (all) w/ ABS (HCU to caliper) 1741-3781 For 12-13 FXD/FXDWG (all) w/ ABS (master cylinder to HCU) 1741-3783 For 12-13 FXD/FXDWG (all) w/ ABS (HCU to caliper) BLACK VINYL-COATED STAINLESS STEEL PART # FITS MODEL FRONT BRAKE LINE KITS 1741-3764 For 12-13 FXS w/ ABS (upper) 1741-3776 For 12-13 FXS w/ ABS (lower) 1741-3786 For 12-13 FLD w/ ABS (upper/lower) 1741-3798 For 12-13 FXDB w/ ABS (upper/lower) 1741-3810 For 12-13 FXDC w/ ABS (upper/lower) 1741-3822 For 12-13 FXDF w/ ABS (upper/lower) 1741-3834 For 12-13 FXDWG w/ ABS (upper/lower) 1741-3846 For 12-13 FXDWG, FXDC, FXDB, FXDB, FLD (mid) (HCU/caliper to manifold) 1741-3848 For 12-13 FXDWG, FXDC, FXDB, FXDB, FLD (mid) (HCU/manifold to master cylinder) REAR BRAKE LINE KITS 1741-3850 For 08 FLHT/FLTR/FLHX w/o ABS 1741-3778 For 12-13 FXS, FLST (all) w/ ABS (master cylinder to HCU) 1741-3780 For 12-13 FXS, FLST (all) w/ ABS (HCU to caliper) 1741-3782 For 12-13 FXD, FXDWG (all) w/ ABS (master cylinder to HCU) 1741-3784 For 12-13 FXD, FXDWG (all) w/ ABS (HCU to caliper)

All part numbers in BLUE are new for 2013.

OEM #

LENGTH

38152-11 41800008 42926-12 42935-12 42927-12 44084-12 42940-12 44233-12 46870-12

263/8”

SUG. RETAIL

161/4”/213/4” 191/4”/271/2” 211/4”/283/4” 211/4”/261/2” 201/4”/23” 213/4”/233/4” 473/4” 46”

$66.95 96.95 87.95 87.95 87.95 111.95 87.95 101.95 101.95

40971-08 43373-11 43384-11 46871-12 46872-12A

25”/20” 171/2”/151/4” 22” 131/2” 271/2”

82.95 118.95 59.95 63.95 94.95

OEM #

LENGTH

38152-11 41800008 42926-12 42935-12 42927-12 44084-12 42940-12 44233-12 46870-12

263/8” 161/4”/213/4” 191/4”/271/2” 211/4”/283/4” 211/4”/261/2” 201/4”/23” 213/4”/233/4” 473/4” 46”

$70.95 102.95 95.95 95.95 95.95 118.95 95.95 113.95 113.95

40971-08 43373-11 43384-11 46871-12 46872-12A

25”/20” 171/2”/151/4” 22” 131/2” 271/2”

87.95 122.95 62.95 67.95 103.95

SUG. RETAIL

SECTION

15

WINDSHIELDS & FAIRINGS

Clear-coated Upper/lower line

TOURING AUDIO & COMMUNICATION LUGGAGE

Black vinyl-coated Upper/lower line

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

EXTENDED LENGTH ABS STAINLESS STEEL BRAKE LINE KITS

•Features clear-coated stainless steel or black vinyl-coated braided extended lines with chrome steel fittings •Meets DOT specifications •Rear lines come with chrome steel switch junction block and uses standard brake light switch •Made in the U.S.A.

ENGINE

NOTE: For matching lower lines on ABS models, see standard length charts (unless note).

NOTE: All measurements are approximate.

CLEAR-COATED STAINLESS STEEL EXTENDED FRONT BRAKE LINE KITS PART # EXTENDED LENGTH FOR 12-13 FXS W/ ABS (UPPER) 1741-3765 +2” 1741-3767 +4” 1741-3769 +6” 1741-3771 +8” 1741-3773 +10” FOR 12-13 FLD W/ ABS (UPPER/LOWER) 1741-3787 +2” 1741-3789 +4” 1741-3791 +6” 1741-3793 +8” 1741-3795 +10” FOR 12-13 FXDB W/ ABS (UPPER/LOWER) 1741-3799 +2” 1741-3801 +4” 1741-3803 +6” 1741-3805 +8” 1741-3807 +10”

OVERALL LENGTH

191/4”/291/2” 191/4”/311/2” 191/4”/331/2” 191/4”/351/2” 191/4”/371/2”

87.95 87.95 87.95 89.95 89.95

211/4”/303/4” 211/4”/323/4” 211/4”/343/4” 211/4”/363/4” 211/4”/383/4”

87.95 87.95 87.95 89.95 89.95

PART # EXTENDED LENGTH OVERALL LENGTH FOR 12-13 FXDC W/ ABS (UPPER/LOWER) 1741-3811 +2” 211/4”/281/2” 1741-3813 +4” 211/4”/301/2” 1741-3815 +6” 211/4”/321/2” 1741-3817 +8” 211/4”/341/2” 1741-3819 +10” 211/4”/361/2” FOR 12-13 FXDF W/ ABS (UPPER/LOWER) 1741-3823 +2” 211/4”/25” 1741-3825 +4” 211/4”/27” 1741-3827 +6” 211/4”/29” 1741-3829 +8” 211/4”/30” 1741-3831 +10” 211/4”/32” FOR 12-13 FXDWG W/ ABS (UPPER/LOWER) 1741-3835 +2” 213/4”/253/4” 1741-3837 +4” 213/4”/273/4” 1741-3839 +6” 213/4”/293/4” 1741-3841 +8” 213/4”/313/4” 1741-3843 +10” 213/4”/333/4”

BLACK VINYL-COATED STAINLESS STEEL EXTENDED FRONT BRAKE LINE KITS PART # EXTENDED LENGTH OVERALL LENGTH SUG. RETAIL FOR 12-13 FXS W/ ABS (UPPER) 1741-3766 +2” 283/8” $70.95 1741-3768 +4” 303/8” 70.95 1741-3770 +6” 323/8” 70.95 3 1741-3772 +8” 34 /8” 72.95 3 1741-3774 +10” 36 /8” 72.95 FOR 12-13 FLD W/ ABS (UPPER/LOWER) 1741-3788 +2” 191/4”/291/2” 95.95 1741-3790 +4” 191/4”/311/2” 95.95 1741-3792 +6” 191/4”/331/2” 95.95 1741-3794 +8” 191/4”/351/2” 98.95 1741-3796 +10” 191/4”/371/2” 98.95 FOR 12-13 FXDB W/ ABS (UPPER/LOWER) 1 3 1741-3800 +2” 21 /4”/30 /4” 95.95 1741-3802 +4” 211/4”/323/4” 95.95 1 3 1741-3804 +6” 21 /4”/34 /4” 95.95 1741-3806 +8” 211/4”/363/4” 98.95 1741-3808 +10” 211/4”/383/4” 98.95

PART # EXTENDED LENGTH OVERALL LENGTH FOR 12-13 FXDC W/ ABS (UPPER/LOWER) 1741-3812 +2” 211/4”/281/2” 1741-3814 +4” 211/4”/301/2” 1741-3816 +6” 211/4”/321/2” 1741-3818 +8” 211/4”/341/2” 1741-3820 +10” 211/4”/361/2” FOR 12-13 FXDF W/ ABS (UPPER/LOWER) 1741-3824 +2” 211/4”/25” 1741-3826 +4” 211/4”/27” 1741-3828 +6” 211/4”/29” 1741-3830 +8” 211/4”/31” 1741-3832 +10” 211/4”/33” FOR 12-13 FXDWG W/ ABS (UPPER/LOWER) 1741-3836 +2” 213/4”/253/4” 1741-3838 +4” 213/4”/273/4” 1741-3840 +6” 213/4”/293/4” 1741-3842 +8” 213/4”/313/4” 1741-3844 +10” 213/4”/333/4”

283/8” 303/8” 323/8” 343/8” 363/8”

SUG. RETAIL $66.95 66.95 66.95 68.95 68.95

1742-0369

SUG. RETAIL

SUG. RETAIL

$87.95 87.95 87.95 89.95 89.95 111.95 111.95 111.95 113.95 113.95 87.95 87.95 87.95 89.95 89.95

$95.95 95.95 95.95 98.95 98.95 118.95 118.95 118.95 120.95 120.95 95.95 95.95 95.95 98.95 98.95

•For use with Drag Specialties universal, black 3/16” o.d. nylon brake lines PART #s 1740-0002 and 1740-0001; see page 1102 of the 2013 FatBook™ •Chrome-plated steel construction •Sold each •Made in the U.S.A. DESCRIPTION 10mm x 1.25 banjo bolt/line fitting

SUG. RETAIL $12.95

PART # 1742-0370

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

1742-0370

BANJO BOLTS

PART # 1742-0369

TRANSMISSION & DRIVELINE

HARDWARE, CHEMICALS & TOOLS DESCRIPTION 12mm x 1.50 banjo bolt/line fitting

All part numbers in BLUE are new for 2013.

SUG. RETAIL $12.95

COVERS, SECURITY & GENERAL

85

SECTION

15

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS

UPPER BRAKE LINES Sterling Chromite II

Black Pearl

Polished Stainless

LOWER BRAKE LINES

EXHAUST FUEL/AIR SYSTEMS ENGINE

Sterling Chromite II

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

Black Pearl Polished Stainless

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

86

DESIGNER SERIES SINGLE-DISC ABS-SPECIFIC FRONT BRAKE LINE KITS FOR SOFTAILS

•Ultra-low-expansion brake line construction designed specifically for ABS system requirements •ABS models utilize a two-piece design consisting of a direct bolt-on lower assembly used in conjunction with alternative length upper lines joined together

by AN -3 fittings for easy installation •Matching braid color and weave on all Magnum control cables and brake lines •Crystal clear outer jacket offers exceptional protection against scuffing paint or chrome and will never discolor •All fittings are highly polished and available in chrome or black chrome plated •Three upper brake line banjo angles (90°, 35° and 180°) at master cylinder ensures proper routing •Inner PTFE tubing with over 100% Kevlar® coverage provides the ultimate in high performance by greatly reducing line expansion in stock and plus-length applications for excellent brake control and safety ratings •Sterling Chromite® II uses patented technology to look like chrome •Black Pearl has a crystal clear-coat over a black wire braid with black-chrome fittings •Polished Stainless braid is cleaner and brighter than standard stainless •Exceeds all DOT FMVSS-106 requirements •Made in the U.S.A. NOTE: Harley-Davidson motorcycles equipped with single-disc ABS (anti-lock brake system) require ABS specific upper and lower brake line kits.

Failure to do so may result in compromised anti-lock braking ability. Magnum Shielding brake line kits manufactured specifically for these applications are identified with the letters “ABS” printed directly on the brake hose IMPORTANT – HOW TO ORDER: •Choose lower line by model specific chart (this applies for both OEM replacement applications and alternative lengths) •For OEM applications, choose upper line by referencing OEM length on following page •For alternative lengths use your stock upper brake line as a reference. Measure from the point at which the soft line enters the crimp collar on the lower portion of the line and follow the brake line routing up to your master cylinder

All part numbers in BLUE are new for 2013.

SECTION

15

WINDSHIELDS & FAIRINGS TOURING

DESIGNER SERIES SINGLE-DISC ABS-SPECIFIC FRONT BRAKE LINE KITS FOR SOFTAILS (CONT) STERLING CHROMITE II ALTERNATIVE LENGTH ABS UPPER BRAKE LINES LENGTH 20” 22” 24” 26” 28” 30”

7/16”/90°

1741-3649 1741-3650 1741-3651 1741-3652 1741-3653 1741-3654

7/16”/180° 1741-3661 1741-3662 1741-3663 1741-3664 1741-3665 1741-3666

7/16”/35°

1741-3673 1741-3674 1741-3675 1741-3676 1741-3677 1741-3678

LENGTH 32” 34” 36” 38” 40” 42”

7/16”/90°

7/16”/180° 1741-3667 1741-3668 1741-3669 1741-3670 1741-3671 1741-3672

7/16”/35°

1741-3655 1741-3656 1741-3657 1741-3658 1741-3659 1741-3660

LENGTH 32”

7/16”/90°

7/16”/180°

7/16”/35°

1741-3694 1741-3695 1741-3696 1741-3697 1741-3698 1741-3699

1741-3706 1741-3707 1741-3708 1741-3709 1741-3710 1741-3711

1741-3718 1741-3719 1741-3720 1741-3721 1741-3722 1741-3723

7/16”/90°

7/16”/180°

7/16”/35°

1741-3733 1741-3734 1741-3735 1741-3736 1741-3737 1741-3738

1741-3745 1741-3746 1741-3747 1741-3748 1741-3749 1741-3750

1741-3757 1741-3758 1741-3759 1741-3760 1741-3761 1741-3762

1741-3679 1741-3680 1741-3681 1741-3682 1741-3683 1741-3684

BLACK PEARL ALTERNATIVE LENGTH ABS UPPER BRAKE LINES LENGTH 20” 22” 24” 26” 28” 30”

7/16”/90°

7/16”/180°

7/16”/35°

1741-3688 1741-3689 1741-3690 1741-3691 1741-3692 1741-3693

1741-3700 1741-3701 1741-3702 1741-3703 1741-3704 1741-3705

1741-3712 1741-3713 1741-3714 1741-3715 1741-3716 1741-3717

34” 36” 38” 40” 42”

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

POLISHED STAINLESS ALTERNATIVE LENGTH ABS UPPER BRAKE LINES LENGTH 20” 22” 24” 26” 28” 30”

7/16”/90°

7/16”/180°

7/16”/35°

1741-3727 1741-3728 1741-3729 1741-3730 1741-3731 1741-3732

1741-3739 1741-3740 1741-3741 1741-3742 1741-3743 1741-3744

1741-3751 1741-3752 1741-3753 1741-3754 1741-3755 1741-3756

LENGTH 32” 34” 36” 38” 40” 42”

ABS LOWER BRAKE LINE PART # FOR 12-13 FLS, 11-13 FLSTC, 1741-3646 1741-3685 1741-3724 FOR 11-13 FXST, 11 FXCW/C 1741-3647 1741-3686 1741-3725

DESCRIPTION SUG. RETAIL 11-13 FLSTF, 11-13 FLSTFB, 11-13 FLSTN Sterling Chromite II $184.95 Black Pearl 184.95 Polished Stainless 179.95 Sterling Chromite II Black Pearl Polished Stainless

PART # FOR 11-13 FXS 1741-3648 1741-3687 1741-3726

DESCRIPTION Sterling Chromite II Black Pearl Polished Stainless

SUG. RETAIL $184.95 184.95 179.95

184.95 184.95 179.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

OEM BRAKE LINE LENGTH AND BANJO SIZE/ANGLE FITMENT 12-13 FLS, 11-13 FLSTF, 12-13 FLSTFB, 11-13 FLSTN, 11-13 FXS 11-13 FLSTC 11 FLSTFB 11-13 FXST, 11 FXCW/C

OEM LENGTH 30” 32” 26” 22”

BANJO 7/16”/35° 7/16”/180° 7/16”/35° 7/16”/35°

HANDLEBARS, CONTROLS & MIRRORS CABLES

ALTERNATIVE LENGTH DESIGNER SERIES UPPER BRAKE LINE PRICE LIST PART # 1741-3649 1741-3650 1741-3651 1741-3652 1741-3653 1741-3654 1741-3655 1741-3656 1741-3657 1741-3658 1741-3659 1741-3660 1741-3661 1741-3662 1741-3663 1741-3664 1741-3665 1741-3666 1741-3667 1741-3668 1741-3669 1741-3670 1741-3671 1741-3672 1741-3673 1741-3674 1741-3675

SUG. RETAIL $52.95 54.95 55.95 56.95 58.95 59.95 60.95 62.95 63.95 65.95 67.95 68.95 52.95 54.95 55.95 56.95 58.95 59.95 60.95 62.95 63.95 65.95 67.95 68.95 52.95 54.95 55.95

PART # 1741-3676 1741-3677 1741-3678 1741-3679 1741-3680 1741-3681 1741-3682 1741-3683 1741-3684 1741-3688 1741-3689 1741-3690 1741-3691 1741-3692 1741-3693 1741-3694 1741-3695 1741-3696 1741-3697 1741-3698 1741-3699 1741-3700 1741-3701 1741-3702 1741-3703 1741-3704 1741-3705

SUG. RETAIL $56.95 58.95 59.95 60.95 62.95 63.95 65.95 67.95 68.95 52.95 54.95 55.95 56.95 58.95 59.95 60.95 62.95 63.95 65.95 67.95 68.95 52.95 54.95 55.95 56.95 58.95 59.95

PART # 1741-3706 1741-3707 1741-3708 1741-3709 1741-3710 1741-3711 1741-3712 1741-3713 1741-3714 1741-3715 1741-3716 1741-3717 1741-3718 1741-3719 1741-3720 1741-3721 1741-3722 1741-3723 1741-3727 1741-3728 1741-3729 1741-3730 1741-3731 1741-3732 1741-3733 1741-3734 1741-3735

All part numbers in BLUE are new for 2013.

SUG. RETAIL $60.95 62.95 63.95 65.95 67.95 68.95 52.95 54.95 55.95 56.95 58.95 59.95 60.95 62.95 63.95 65.95 67.95 68.95 47.95 49.95 50.95 51.95 53.95 54.95 55.95 57.95 58.95

PART # 1741-3736 1741-3737 1741-3738 1741-3739 1741-3740 1741-3741 1741-3742 1741-3743 1741-3744 1741-3745 1741-3746 1741-3747 1741-3748 1741-3749 1741-3750 1741-3751 1741-3752 1741-3753 1741-3754 1741-3755 1741-3756 1741-3757 1741-3758 1741-3759 1741-3760 1741-3761 1741-3762

SUG. RETAIL $60.95 62.95 63.95 47.95 49.95 50.95 51.95 53.95 54.95 55.95 57.95 58.95 60.95 62.95 63.95 47.95 49.95 50.95 51.95 53.95 54.95 55.95 57.95 58.95 60.95 62.95 63.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

87

SECTION

16

WINDSHIELDS & FAIRINGS TOURING

0701-0705

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS 0701-0706

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL WASP STYLE GAS TANKS

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

•Wasp-style narrow gas tanks for custom applications that have a great vintage look •Made from precision steel stampings and hold 2.2 gal.

•Have a right side 3/8” NPT and left side 1/4” NPT petcock bung •Universal brackets make it easy to mount it to any stock or custom frame •Available in a single- or dual-cap version •Left filler is non-functional on dual cap •Uses 73-81 style cam lock caps •(17.75” L x 9”W x 9D) tunnel measures 2.5”W x 3.5”D PART # 0701-0705

DESCRIPTION Single cap

SUG. RETAIL $139.95

PART # 0701-0706

DESCRIPTION Dual cap

SUG. RETAIL $149.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

88

0703-0293

0703-0510

POP-UP GAS FILLER AND FUEL LEVEL CAP

•Replace your stock cap and gas gauge with these sleek additions •Left-side cap features a low-fuel LED warning light built in, push-in installation and wiring harness included •User-programmable to light the LED at any pre-set fuel level •Fits all bikes with a left-side analog gas gauge •Right-side cap fits nearly flush, opens easily with a quarter-turn of the cap center •Chrome finish •Fuel level cap made in U.S.A. for Drag Specialties by Namz Custom Cycle Products PART # FOR L96-13 MODELS (EXCEPT 04-13 XL) 0703-0510 0703-0293

DESCRIPTION Fuel level cap w/ LED warning light (2.75” o.d.)

Vented pop-up gas cap

SUG. RETAIL $117.95 49.95

WARNING: All tanks are shipped unpainted. Caps are not included unless noted. All gas tanks should be fitted, pressure-tested and sealed BEFORE being painted to eliminate potential problems.

All part numbers in BLUE are new for 2013.

SECTION

16

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE 0703-0530

0703-0531

0703-0528

SEATS & SISSY BARS

0703-0533

EXHAUST FUEL/AIR SYSTEMS ENGINE 0703-0537

0703-0535

TRANSMISSION & DRIVELINE

0703-0534

GASKETS & SEALS ELECTRICAL

REPLACEMENT FUEL GAUGE CAPS WITH LED FUEL LIGHT •Machined Performance Machine Logo •CNC’d from aircraft-grade aluminum •Feature a 7-LED fuel gauge •Replace OEM fuel gauge cap •Made in the U.S.A. PART # FOR L96-13 H-D MODELS 0703-0528 0703-0529 0703-0530 0703-0531 0703-0532 0703-0533 0703-0534 0703-0535

DESCRIPTION Apex, Contrast Cut Apex, chrome Apex, Black Ops Array, Contrast Cut Array, chrome Array, Black Ops Grill, Contrast Cut Grill, chrome

LIGHTING 0703-0540 SUG. RETAIL $119.95 119.95 119.95 119.95 119.95 119.95 119.95 119.95

0703-0541

PART # DESCRIPTION FOR L96-13 H-D MODELS (CONT) 0703-0536 Grill, Black Ops 0703-0537 Merc, Contrast Cut 0703-0538 Merc, chrome 0703-0539 Merc, Black Ops 0703-0540 Scallop, Contrast Cut 0703-0541 Scallop, chrome 0703-0542 Scallop, Black Ops

SUG. RETAIL $119.95 119.95 119.95 119.95 119.95 119.95 119.95

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

INFORMER LED FUEL/BATTERY GAUGE

•Cap incorporates LED battery and LED fuel gauge •Daylight sensor adjusts LED brightness level •Fuel gauge illuminates a single green LED when full, from full to 5/8 tank a string of green LEDs, from 1/2 to 1/4 tank amber LEDs, from 1/4 tank red LEDs, and when near empty a flashing single red LED •”Empty” fuel level at which the red LED begins flashing can be set by the rider •Battery gauge shows green LEDs when the charging system is between 12.5V and 14.5V, amber LEDs if the bike is not charging and flashing red LEDs if charging level exceeds 15V or drops below 10V •The perfect match for Küryakyn’s flush-mount gas cap PART # 2212-0433

DESCRIPTION For 94-13 FLHR, 00-13 FXST/FLST, 91-13 Dyna (except console-mounted gauges) and 88-94 FXR (except console-mounted gauges)

SUG. RETAIL $139.95

All part numbers in BLUE are new for 2013.

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

LOW FUEL LIGHT ELIMINATOR PLUG

•Designed to turn off the low fuel warning light in the speedometer •For use when removing factory fuel gauge PART # 2130-0136

DESCRIPTION For 04-13 Softail and Dyna models

SUG. RETAIL $18.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

89

SECTION

16

WINDSHIELDS & FAIRINGS

0707-0020

TOURING

0707-0019

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

PEAK FLOW FUEL FILTERS

•Machined from 6061 T-6 billet aluminum, then anodized •Filter element is made from pleated 304 stainless steel; filters down to 10 microns and still flows 6 gal. a minute •Mini filter body measures 13/4” L; super mini body measures 7/8” L (less fittings) •Made in the U.S.A. PART # 0707-0020 0707-0019

DESCRIPTION Mini, 5/16” fittings Super Mini, 1/4” fittings

SUG. RETAIL $57.95 53.95

O-RING SERVICE KIT

•Kit includes O-rings to service any of the Drag Specialties EFI Fuel Lines •Suitable for fuels up to 10% ethanol •Can be used in fuel tank check valves PART # 0706-0209

DESCRIPTION EFI fuel line O-ring service kit

SUG. RETAIL $7.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

0706-0201 0706-0219

UNIVERSAL FUEL CROSSOVER LINES WITH QUICK DISCONNECT

•Fuel crossover with quick disconnect features black textile braided hose with high-quality quick disconnect valve and attractive hose finishers for simple attachment to hose barbs •Braided hose is compatible with gasoline, coolants and ethanol •Chrome plated quick disconnect features durable Viton O-rings to prevent leakage •Stainless shut off valves eliminate fuel loss during tank removal and QD assembly is rated at 250 PSI •Universal design fits most models with split tanks

PART # 0706-0219

DESCRIPTION Fuel crossover lines

SUG. RETAIL $108.95

PART # 0706-0201

DESCRIPTION Repl. Viton O-rings 3/16”, 1/4”

SUG. RETAIL $3.95

CABLES BRAKES TANKS & OIL FILTERS

OIL TANK

•A duplicate of the original equipment black oil tank •Includes filler cap •Approximately 3.0 quart capacity PART # 0710-0163

DESCRIPTION For 86-93 XL; repl. OEM #62475-83

OIL TANK MOUNT STUD COVERS SUG. RETAIL $119.95

DASHES & GAUGES

•Fit the rubber mounts on 89-99 Softail oil tanks •Show-chrome plated •Sold in pairs PART # 0710-0165

DESCRIPTION For 89-99 Softails

SUG. RETAIL $22.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

90

STEPLESS® EAR CLAMPS

•Narrow 5mm wide band provides concentrated seal compression •360° Stepless® design with no gaps on inner surface •Specially formed strip edges reduce the risk of damage to the part being clamped •Lightweight design •Tampering is visible •For the full range of Motion Pro Stepless Ear Clamps see page 1172 of the 2013 Drag Specialties FatBook™ •Sold in 10-pack •PART #3801-0034 or 3801-0182 are required for installation; see page 1454 of the 2013 Drag Specialties FatBook™ PART # 2401-0819

DESCRIPTION Stepless clamps, 8.8-10.5mm

SUG. RETAIL $.85 (ea.)

TRAMP CLAMPS

•Extruded brass hose clamps with show chrome plated finish •Perfect complement to Namz oil and fuel hose •Available for 3/8” i.d. and 1/4-5/16” i.d. hose lines •Sold in 6-packs PART # 0706-0218 0711-0212

All part numbers in BLUE are new for 2013.

DESCRIPTION For 3/8” i.d. hose For 1/4 - 5/16” i.d. hose

0706-0218 SUG. RETAIL $36.95 36.95

SECTION

17

WINDSHIELDS & FAIRINGS

2202-0155

2202-0156

TOURING AUDIO & COMMUNICATION LUGGAGE

2202-0157

SEATS & SISSY BARS EXHAUST

FUEL TANK CONSOLE DOOR

2202-0162

2202-0160

•Made from die-cast metal •A great replacement for your stock fuel door •Available in three styles

2202-0161 2202-0163

WIREFRAME DASH INSERTS

•Machined from lightweight and high-strength 6061 T-6 aluminum •Available in a high gloss black anodized finish, bright chrome plating or a combination •Easily installs with double-sided adhesive tape; no modifications required •Made in the U.S.A. PART # FOR 08-13 FLHX/FLHXXX, 2202-0160 2202-0161 2202-0162 2202-0163 FOR 06-07 FLHX 2202-0164 2202-0165 2202-0166 2202-0167

FUEL/AIR SYSTEMS

DESCRIPTION 10-13 FLTRX Chrome Black anodized Chrome/black anodized Black anodized/chrome

SUG. RETAIL

Chrome Black anodized Chrome/black anodized Black anodized/chrome

189.95 189.95 189.95 189.95

ENGINE

PART # DESCRIPTION FOR 08-13 FLHT/FLHX/FLTR MODELS 2202-0155 Chrome 2202-0156 Skull 2202-0157 Black

SUG. RETAIL $39.95 39.95 39.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

$189.95 189.95 189.95 189.95

2210-0285

LIGHTING 2210-0287

HANDLEBARS, CONTROLS & MIRRORS CABLES ELECTRONIC SPEEDOMETER SENSORS •Direct replacement for OEM sensors

2202-0158

PUSH-BUTTON FUEL DOOR LATCH

•A great replacement for the key lock fuel door latch •Makes opening the cap just a simple push of the button •Available in chrome

2202-0159

PART # 2210-0285 2210-0286 2210-0287

DESCRIPTION For 95-03 XL; repl. OEM # 74402-95 For 95-05 FXD; repl. OEM # 74420-94 For 96-99 FXST; repl. OEM # 74437-96

SUG. RETAIL $69.95 69.95 69.95

TANKS & OIL FILTERS DASHES & GAUGES

NOTE: Must use spring hinge pin, PART #2202-0159 PART # DESCRIPTION FOR 08-13 FLHT/FLHX/FLTR MODELS 2202-0158 Push-button fuel door latch 2202-0159 Fuel door spring hinge pin

BRAKES

FRAMES, SUSPENSION & FENDERS

SUG. RETAIL $29.95 9.95

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

SPEEDO RECALIBRATION UNIT •Correct reading of stock electronic speedometers when using oversize tires or other drive-train mods that affect the final drive ratio PART # 2210-0288

OIL PRESSURE GAUGE KIT

HARDWARE, CHEMICALS & TOOLS

PART # 2212-0427

COVERS, SECURITY & GENERAL

•Kit includes oil-filled 15/8” 60PSI gauge, chrome mounting bracket and mounting hardware

DESCRIPTION SUG. RETAIL For all Big Twin models with 5-speed transmission $99.95

DESCRIPTION SUG. RETAIL For 99-05 FXD/ 00-10 FXST/ 00-13 FLST/ 99-13 FLHT $79.95

All part numbers in BLUE are new for 2013.

91

SECTION

18

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS

RIGID STYLE 04-13 SPORTSTER FRAME

•Quality •Utilizes OE 04-13 XL, rubber engine mounting system •Constructed of 11/4” thick wall, DOM steel tubing •30 degree rake with a 0” stretch •Frames are MIG and TIG welded and will accept 04-13 rubber mounted XL engines only •Includes axle •See page 1208 in the FatBook™ for XL oil tank and XL oil tank bracket •Made in the U.S.A. PART # 0501-0086

DESCRIPTION Sportster frame

SUG. RETAIL $1,225.72

FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

92

CUSTOM BUILDER BUNGS

•Take the headache out of mounting fenders, tanks, coils and other custom building and parts installation •Machined from cold-rolled steel •Threaded bungs are drilled and tapped all the way through •Sold in 5-pk.

•Made in the U.S.A. PART # 0502-0442

DESCRIPTION NPT x 1/2” L, 3/4” o.d. (large) 1/2” o.d. (small)

1/8

All part numbers in BLUE are new for 2013.

SUG. RETAIL $24.95

SECTION

18

WINDSHIELDS & FAIRINGS

0510-0222 0510-0223

TOURING AUDIO & COMMUNICATION KICKSTAND BUMPERS

SHORT KICKSTAND

PART # 0510-0265

DESCRIPTION For 89-06 FXST and FLST models (1” under stock)

LUGGAGE

•Rubber bumpers to protect your kickstand and frame •Sold each

•High-strength steel kickstand with a brilliant chrome finish •Replaces OEM kickstands perfectly •1” under stock length (10”L) for bikes with lowered suspension SUG. RETAIL

PART # 0510-0222 0510-0223

$52.95

DESCRIPTION For 07-13 FXST/FLST; repl. OEM #62123-07 For 07-13 FLHT/FLHR/FLTR/FLHX; repl. OEM #50245-07

SUG. RETAIL $2.95

SEATS & SISSY BARS

2.95

EXHAUST FUEL/AIR SYSTEMS ENGINE

0520-1176

0520-1173 0520-1175

SWOOP SIDE COVERS

TRANSMISSION & DRIVELINE

•Swoop side covers are 3-D molded (not open on the bag side) with perfect body lines •Swoop side covers are molded composite-stretched side covers •Shape is as narrow as possible up front to avoid interfering with the rider’s legs •Direct snap-on replacement for the OEM covers •Do not require trimming, shaping, gluing or drilling for installation •Available in a smooth or scooped design •Sold in pairs PART # DESCRIPTION SUG. RETAIL SMOOTH SWOOPED SIDE COVERS 0520-1173 For 09-13 FLHT/FLHR/FLTR/FLHX w/ OEM saddlebags $699.95 0520-1174 For 97-08 FLT/FLHT/FLHR/FLHX w/ OEM saddlebags 699.95 0520-1175 For 09-13 FLHT CVO models w/ CVO saddlebags 699.95

GASKETS & SEALS

PART # DESCRIPTION SUG. RETAIL SCOOPED SWOOP SIDE COVERS 0520-1176 For 09-13 FLHT/FLHR/FLTR/FLHX w/ OEM saddlebags $699.95 0520-1177 For 97-08 FLT/FLHT/FLHR/FLHX w/ OEM saddlebags 699.95 0520-1178 For 09-13 FLHT CVO models w/ CVO saddlebags 699.95

ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

WIREFRAME GRILLES

•Machined from lightweight and high strength 6061 T-6 aluminum •Available in a high gloss black anodized finish, bright chrome plating or a combination •Simple bolt-on installation •Made in the U.S.A.

0504-0232

PART # DESCRIPTION FOR 09-13 FLHT/FLHR/FLHX/FLTR 0504-0232 Chrome 0504-0233 Black anodized 0504-0234 Chrome/black anodized 0504-0235 Black anodized/chrome

DASHES & GAUGES

0504-0237 0504-0234 SUG. RETAIL $269.95 269.95 269.95 269.95

PART # DESCRIPTION FOR 94-08 FLT/FLHT/FLHR/FLHX/FLTR 0504-0236 Chrome 0504-0237 Black anodized 0504-0238 Chrome/black anodized 0504-0239 Black anodized/chrome

0504-0239 SUG. RETAIL $269.95 269.95 269.95 269.95

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

NECK POST BEARING CUP

•High quality replacement race; sold each PART # DESCRIPTION FOR 85 FX; 85-86 FXWG; 84-13 FXST, FLST; 86-13 XL, 84-94 FXR; 91-13 DYNA GLIDE, 84-13 FLT, FLHT, FLTR, FLHR AND 02-13 V-ROD 0410-0225 Outer race/cup only; repl. OEM # 48315-60

All part numbers in BLUE are new for 2013.

SUG. RETAIL $3.95

COVERS, SECURITY & GENERAL

93

SECTION

18

WINDSHIELDS & FAIRINGS TOURING

0408-0298 0408-0299

AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE

39MM SPEED TRIPLE TREES

•CNC machined out of 6061 aluminum •Available in black anodized finish or polished finish •Includes steering stem and external hardware for use with stock 88-13 XL steering stops •Pre-drilled for internal fork stops •These trees have been designed for better stability especially when used with longer than stock shocks •Will provide more stability at high speed, with a modified offset to increase the trail •Made in the U.S.A. PART # DESCRIPTION FOR 91-05 FXD, 88-99 FXR AND 88-13 XL (EXCEPT 10-13 1200X, 11-13 883L, 1200C) 0408-0298 Black finish 0408-0299 Polished finish

SUG. RETAIL $624.95 624.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

0408-0301

41MM BILLET WIDE GLIDE TRIPLE TREE SETS

0408-0303

•CNC machined from aircraft-quality billet aluminum •Accept 41mm fork tubes •Smooth finish with or without built-in turn signals •Available in black anodized and chrome •Include handlebar dampeners with chrome billet caps, fork tube plugs, fork stem and all necessary mounting hardware NOTE: Installation of these triple trees renders any stock security fork locking capability inoperative.

NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes.

FOR 83-13 FXST/FLST AND CUSTOM APPLICATIONS (EXCEPT 11-13 FXS) PART # DESCRIPTION SUG. RETAIL CHROME 0408-0301 0° rake, smooth w/o built-in turn signals $459.95 0408-0302 0° rake, smooth w/ built-in turn signals 469.95

PART # DESCRIPTION BLACK ANODIZED 0408-0303 7° rake, smooth w/ built-in turn signals

SUG. RETAIL $519.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

94

“KO” RAKED TRIPLE TREES

•Billet aluminum trees add 8 degrees of rake to attain proper geometry when using 21”, 23” or 26” front wheels (stretches the front of bike approximately 5”) •Fairing maintains stock position and does not require angled headlight wedges or special brackets to properly adjust your headlight •Triple Tree kit includes aluminum triple trees, steering stem, fork tube extension, fork stops, travel limiters and everything else necessary for installation •Trim kits for FLTR models raise the fairing for proper clearance (sold separately) NOTE: Will not work with factory diameter wheels NOTE: Raked triple trees change the handling characteristics of the motorcycle. Use caution until familiar with the changes.

PART # RAKED TRIPLE TREE KIT 0408-0300 TRIM KITS 2330-0100 2330-0101

0408-0300 DESCRIPTION For 97-13 FLT, FLHT, FLHX, FLTR models For 09-13 FLTR models For 98-08 FLTR models

All part numbers in BLUE are new for 2013.

2330-0101 SUG. RETAIL $899.95 149.95 149.95

SECTION

18

WINDSHIELDS & FAIRINGS TOURING 0411-0043

AUDIO & COMMUNICATION DS-222910

LUGGAGE

FORK TINS

•High-quality reproduction fork tins •Available in a smooth or ribbed styles in chrome or gloss black finish •Slider covers can also be purchased separately; see 2013 Fatbook pg. 1232

SEATS & SISSY BARS

DS-222911

NOTE: Models equipped with front passing lights may need a hole drilled in the rear panel for on/off switch.

PART # FOR ALL 86-13 FLST MODELS 0411-0018 0411-0043 DS-222910 DS-222911

DESCRIPTION

SUG. RETAIL

Smooth, 3-piece fork tins; chrome Smooth, 3-piece fork tins; gloss black Ribbed, 3-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86; chrome Ribbed, 5-piece fork tins; repl. OEM #67808-86, 67816-86, 67820-86, 45964-86; chrome

$89.95 89.95 92.95 124.95

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

0411-0055 0411-0056

0411-0053

LIGHTING

0411-0054

FORK SLIDER COVERS

•Machined from billet aluminum •Available in chrome, Contrast Cut™ or Black Ops™ finish •Contrast Cut finish starts with a slider cover that has been black anodized, then recut to open up the design •Black Ops finish features a gloss black on top of a contrasting textured black for outstanding durability and good looks •Sold in pairs •Made in the U.S.A. PART # DESCRIPTION FOR 86-13 FLT, FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE 0411-0055 Tech, Contrast Cut 0411-0056 Tech, chrome 0011-0057 Tech, Black Ops

SUG. RETAIL $299.95 299.95 299.95

HANDLEBARS, CONTROLS & MIRRORS

FORK SLIDER COVERS

•CNC-machined from 6061 T-6 aluminum •Available in chrome or black anodized •Designed to match Eddie Trotta Exhaust Tips •Sold in pairs •Made in the U.S.A.

CABLES

PART # DESCRIPTION FOR 86-13 FLT, FLHT, FLHR, FLTR, FLHX AND H-D FL TRIKE 0411-0053 Cross-cut black anodized 0411-0054 Cross-cut chrome

SUG. RETAIL $316.95 316.95

TANKS & OIL FILTERS

DS-240341

FORK LEG KITS

DASHES & GAUGES

•Artfully sculpted from heat treated billet aluminum •Machined PM icon logo with a pin-stripe detail that extends the length of the fork legs, and a hidden axle design •Kits include axle, axle covers, left and right legs with caliper and fender mounts installed •Available in single disc or dual disc in chrome and Contrast Cut™ finishes •Made in the U.S.A. SUG. PART NO. DESCRIPTION RETAIL FOR 08-13 FLHT/FLHR/FLHX/FLTR MODELS 0403-0072 Contrast Cut™ (single disc) $619.95 0403-0073 Chrome (single disc) 619.95 0403-0070 Contrast Cut™ (dual disc) 619.95 0403-0071 Chrome (dual disc) 619.95 FOR 00-07 FL/FLHT/FLHR/FLHX/FLTR MODELS 0403-0068 Contrast Cut™ (single disc) 619.95 0403-0069 Chrome (single disc) 619.95 0403-0066 Contrast Cut™ (dual disc) 619.95 0403-0067 Chrome (dual disc) 619.95

BRAKES

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

FORK BOOTS

•Black molded rubber construction •Sold in pairs PART # DS-240341

0403-0068

0403-0067

All part numbers in BLUE are new for 2013.

DS-240350

DESCRIPTION For 84-10 FXST, 93-05 FXDWG and 85-86 FXWG; repl. OEM #45420-80 For 86-87 FX, XL (Showa); repl. OEM #45404-75

SUG. RETAIL

HARDWARE, CHEMICALS & TOOLS

$8.95

COVERS, SECURITY & GENERAL

5.95

95

SECTION

18

WINDSHIELDS & FAIRINGS 1310-0933

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

970 SERIES PIGGYBACK SHOCKS

•Progressive Suspension does it once again!

•Designed for performance oriented twin shock bikes •Features piggyback reservoirs, high-pressure gas charge and deflective disc-valving, all packaged in a mono-tube style body •Includes progressive rate springs •The threaded pre-load adjustment and external compression adjustment knob allow for fine tuning to provide optimum performance rider weight or riding style •Available in classic bronze or a subtle combination of gloss and matte black finishes NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as, swingarm/axle to exhaust contact as well as chain/ belt guard or tire contact.

PART # FOR 91-13 FXD/FXDWG MODELS 1310-0933 1310-0935 1310-0934

1310-0934

COLOR

DESCRIPTION

Gloss black/matte black Gloss black/matte black Bronze/black

12.5” 13.5” 13.5”

SUG. RETAIL $999.95 999.95 999.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

15” STILETTO SHOCKS

•Created to provide your Sportster the attitude and rear suspension travel that a proper café, Scrambler or post apocalyptic XL wants and deserves •High-performance damper with dual springs •Main spring coil absorbs big hits and prevents bottoming, while the secondary coil smooths out minor road imperfections •Provides a plush ride that’s not afraid to play rough •May require modification to exhaust brackets to open up clearance for belt •Sold in pairs •Made in the U.S.A.

GASKETS & SEALS ELECTRICAL

NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.

LIGHTING HANDLEBARS, CONTROLS & MIRRORS

PART # 1310-0932

DESCRIPTION For 86-03 XL models

SUG. RETAIL $299.95

CABLES 10” STRUTS

BRAKES TANKS & OIL FILTERS

•0.120” wall DOM steel construction •11/8” O.D. shafts with 0.120” wall TIG welded sleeves •1/2” I.D. mounting stud holes •Matte black electroplated finish •CNC lathe turned ends PART # •10” length (eyelet center-to-center) 1304-0538 •Sold in pairs

DESCRIPTION 10” struts

SUG. RETAIL $89.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

96

SLAMMER KIT

•Complete lowering kit includes shocks with black springs and covers and fork springs •Easy-to-install fork springs that do not require the removal of forks •Drop-in fork springs lower front end up to 2” •Shocks lower rear up to 21/2” •Made in the U.S.A. NOTE: Before purchasing or attempting to install shocks that are different than the OEM length, confirm that your wheel travel can be altered without causing clearance issues such as swingarm/axle to exhaust contact as well as chain/belt guard or tire contact.

PART # 1310-0931

DESCRIPTION For 06-13 FXD (except FXDWG)

All part numbers in BLUE are new for 2013.

SUG. RETAIL $339.95

SECTION 1621-0463

1621-0464

19

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION

6” FORWARD CONTROL EXTENSION KIT

•Machined from 6061 T-6 billet aluminum •Powdercoated gloss black to match the frame •Bolts directly to the existing factory mounts and moves the OEM-style controls forward 6” from the stock location •Made in the U.S.A.

LUGGAGE

1621-0465

NOTE: Check fender clearance before riding.

PART # 1622-0473

DESCRIPTION For 04-13 XL

SUG. RETAIL $264.95

1621-0518

SEATS & SISSY BARS

PASSENGER FLOORBOARDS AND INSERTS

•Traditional D-shaped floorboards feature die-cast aluminum construction with a chrome finish •Mount with OEM hardware or Drag Specialties floorboard pivot kit PART #1621-0461 •Inserts are constructed from high-quality rubber and are available in patterns to match 86-05 or 06-13 OEM-style inserts •Floorboards and inserts are sold in pairs and must be purchased separately NOTE: Models with passenger footpegs will require the use of PART #s 1621-0392, 1621-0393, 1621-0394 or 1621-0395 accessory passenger floorboard mounts; see 2013 FatBook™ page 1306.

1621-0519

PART # DESCRIPTION SUG. RETAIL FLOORBOARDS 1621-0463 For L86-13 FLT, FLHT, FLHR, FLHX, FLTR/X, FLSTC, FLSTF $75.95 INSERTS 1621-0464 For 06-13 FLT, FLHT, FLHR, FLHX, FLTR/X, FLSTC, FLSTF; repl. OEM #50606-06 29.95 1621-0465 For 86-05 FLT, FLHT, FLHR, FLHX, FLTR/X, FLSTC, FLSTF; repl. OEM #50606-86A 29.95

1620-1126

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING

1620-1125

HANDLEBARS, CONTROLS & MIRRORS CABLES

ANTI-ROTATION PASSENGER FLOORBOARD MOUNTS

•Add floorboards PART #s 1621-0088 or 1621-0144 to your Softail without the chance of them rotating or coming loose •Easy and precise adjustments with interlocking teeth on mounts •Designed for use with stock exhaust •Sold in pairs PART # 1621-05181 1621-05192 1621-05203 1

2

3

DESCRIPTION SUG. RETAIL For 07-13 FLSTN $79.95 For 08-10 FLSTC/FXSTC, 08-09 FXSTB, 10 FLSTSE 79.95 For 00-07 FLSTC, 06 FLST, 00-07 FXST/FXSTB, 07 FXSTC, 00-06 FXSTS 79.95

If stock exhaust system and rear support bracket have been removed and replaced by a staggered dual or 2-in-1 system, use PART #1621-0519.

Will also fit 08-13 FLSTN, FLSTF, FLSTFB and FXSTSSE if the stock exhaust and rear support bracket have been removed and replaced with a staggered dual or 2-in-1 system.

Will also fit 05-06 FLSTN, 00-07 FLSTF and 07 FXSTSSE if the stock exhaust and rear support bracket have been removed and replaced with a staggered dual or 2-in-1 system.

MUSHMAN FOOTPEGS

•Just like the Sanderson footpegs these feature investment-cast stainless steel construction •Each peg attaches with a single Allen cap screw to an infinitely adjustable cast chromoly clevis •Riders can fine-tune the angle of the textured surface relative to the bottom of their boots •Available in raw polished or black electroplate finish •Pegs measure 21/8” wide by 31/2” long •Sold in pairs PART # 1620-1127 1620-1128

DESCRIPTION Raw polished Black electroplate

BRAKES SANDERSON FOOTPEGS

•Investment-cast stainless steel construction •Each peg attaches with a single Allen cap screw to an infinitely adjustable cast chromoly male clevis •Riders can fine-tune the angle of the textured surface relative to the bottom of their boots •Available in raw polished or black electroplate finish •Pegs measure 11/8” wide by 4” long •Sold in pairs PART # 1620-1125 1620-1126

DESCRIPTION Raw polished Black electroplate

1620-1127

SUG. RETAIL $119.95 119.95

All part numbers in BLUE are new for 2013.

SUG. RETAIL $119.95 119.95

1620-1128

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

97

SECTION

19

WINDSHIELDS & FAIRINGS

1603-0233

1603-0234 1620-1135

1620-0036

TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

REPLACEMENT RUBBER FOR RAZOR FOOTPEGS AND SHIFT PEG

•Footpeg rubber sold sets for two pegs; shift peg rubber sold each

PART # 1620-1136

FUEL/AIR SYSTEMS

1603-0234

DESCRIPTION Repl. footpeg rubber for PART #s 1620-1049 and 1603-1050 Repl. shift peg rubber for PART # 1603-0190 and 1603-0191

SUG. RETAIL

REPLACEMENT RUBBER SLEEVES FOR RIPTIDE FOOTPEGS AND SHIFT PEG

•Footpeg rubber sold in sets for two pegs; shift peg rubber sold each

PART # 1620-1135

$14.95 1603-0233 11.95

DESCRIPTION Repl. footpeg rubber sleeves for PART #s 1620-1047 and 1620-1048 Repl. shift peg rubber for PART #s 1603-0188 and 1603-0189

SUG. RETAIL $7.95 4.95

ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

EXTENDED DELRIN® SHIFT PEG

•Longer shift peg makes changing gears a breeze •Peg measures approximately 3.5” long •Made of durable Delrin® material that retains the factory look •Includes chrome mounting bolt •Sold each •Made in the U.S.A.

CHROME SHIFT PEG EXTENSION

•Extend the stock shift peg out an additional 1.5” •Extension is ribbed to match the OEM look •Pre-installed mounting screw •Sold each •Made in the U.S.A. PART # 1620-1131

DESCRIPTION Shift peg extension

SUG. RETAIL $39.95

PART # 1620-1130

DESCRIPTION Extended Delrin® shift peg

SUG. RETAIL $19.95

CABLES 1620-1139

1620-1138

BRAKES TANKS & OIL FILTERS

1603-0238

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES

BILLET FOOTPEGS WITH MATCHING SHIFT PEGS

•Available in scimitar, rubber band, smooth and ball-milled styles in a chrome or black finish •Footpegs fit all applications with male mount footpegs •Shift pegs measure 3.445” in length and are designed to match billet footpegs •Shift pegs fit stock H-D arms or most forward controls •Footpegs sold in pairs; shift pegs sold each

1603-0237

1603-0235

NOTE: Footpegs will not fit 2013 XL1200V/XL1200X/XL1200C models.

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

98

FOOTPEGS PART # BLACK (PR.) 1620-1138 1620-1139

SHIFT PEGS DESCRIPTION

SUG. RETAIL

Scimitar Rubber band

$114.95 99.95

PART # CHROME (EA.) 1603-0236 1603-0238 1603-0235

DESCRIPTION Scimitar Smooth Ball-milled

SUG. RETAIL $34.95 32.95 34.95

All part numbers in BLUE are new for 2013.

PART # BLACK (EA.) 1603-0237 1306-0239

DESCRIPTION Scimitar Smooth

SUG. RETAIL $34.95 32.95

SECTION

19

WINDSHIELDS & FAIRINGS TOURING ISO® FOOTPEGS

•Give you a custom look and dampen vibration •Interchangeable mounts •Hollow-core neoprene inserts are long lasting •Measure 11/2” in diameter x 47/8” long •Mounts available separately; see the 2013 FatBook™ •Sold in pairs NOTE: ISO -Pegs components are not compatible with other footpegs such as the Soft-Ride style. ®

AUDIO & COMMUNICATION LUGGAGE PART # 1620-0158

DESCRIPTION Large pegs w/ out adapter

SUG. RETAIL $39.95

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

LONGHORN TRIDENT ISO™-SHIFT PEGS

•An updated design of the original ISO™-Pegs •Look great with stock or custom footrests •5/8” longer than stock •Come without male-mount ends •Sold each NOTE: Will not fit 2013 XL1200X/ XL1200V/XL1200C models.

ENGINE

PART # 1603-0247

DESCRIPTION Chrome

SUG. RETAIL $17.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

ADJUSTABLE PASSENGER PEGS

LIGHTING

•Provide five locking positions for alternative footrest placement •Easy one-bolt installation •Include small ISO™-Pegs on retractable arms •Footpegs for female mounts must be purchased separately •Sold in pairs PART # 1620-0001

HANDLEBARS, CONTROLS & MIRRORS CABLES

DESCRIPTION For 86-07 FXST, FLST models (except FXSTD, FLSTF FLSTN and FLSTS w/ OEM exhaust or cross-over exhaust systems)

SUG. RETAIL $199.95

BRAKES TANKS & OIL FILTERS

1620-1133

1620-1132

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

FOOTPEG RELOCATION CLEVIS

•Add adjustability and comfort with this amazing clevis kit •Allows you to adjust the footpegs forward or back, and extend them out •Installation is quick; all necessary hardware is supplied •Sold in pairs •Made in the U.S.A.

WHEELS & AXLES

NOTE: You may need to adjust your stock mount rotation to allow your footpeg to still fold up.

PART # 1620-1132

DESCRIPTION Chrome

SUG. RETAIL $49.95

HARDWARE, CHEMICALS & TOOLS

After Before

PART # 1620-1133

All part numbers in BLUE are new for 2013.

DESCRIPTION Black

SUG. RETAIL $49.95

COVERS, SECURITY & GENERAL

99

SECTION

19

WINDSHIELDS & FAIRINGS

2030-0696

TOURING

2030-0684

AUDIO & COMMUNICATION LUGGAGE

2030-0695

SEATS & SISSY BARS

2030-0698

EXHAUST FUEL/AIR SYSTEMS

2030-0685

ENGINE 2030-0697

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES

STEALTH 2 LICENSE PLATE FRAME ASSEMBLIES

•Ideal for frenched license plate applications that don’t require a backing plate •Included frame boxes will require custom mounting •Frames feature two hidden LEDs in the corners •Available with a chrome or black anodized finish frames •Outside dimensions: 61/2” x 4” •1/4” thick •Window size: 63/8” x 31/2” •63/8” x 23/4” on-center mounting holes •Accept most 4” x 7” license plates PART # 2030-0695 2030-0696 2030-0697 2030-0698

DESCRIPTION Chrome with composite box Black with composite box Chrome with steel box Black with steel box

SUG. RETAIL $199.95 199.95 199.95 199.95

SIDE MOUNT LICENSE PLATE ASSEMBLY •Made from 6061 T-6 billet aluminum •Available in chrome or black anodized •Axle mount design •Can be mounted vertically or horizontally •Includes a bright LED tag light •Made in the U.S.A. PART # FOR 04-13 XL MODELS 2030-0684 2030-0685

DESCRIPTION

SUG. RETAIL

Black anodized Chrome

$149.95 149.95

2010-1084

BRAKES

2030-0701

TANKS & OIL FILTERS

MAKO AND MODEL B LICENSE PLATE/TAILLIGHT BRACKETS

DASHES & GAUGES

•Constructed out of laser-cut 1/8” thick sheet steel with no finish •Accept Mako or Model B taillights;see LIGHTING section •Brackets may require custom mounting/fabrication and can be polished, chromed or painted after fabrication

FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

PART # 2010-1084 2030-0701

COVERS, SECURITY & GENERAL

100

SUG. RETAIL $14.95 14.95

3550-0164

WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

DESCRIPTION Model B sissy bar bracket Mako fender mount bracket

STASH TUBES 3550-0165

•Fit 5.75” on-center bolt pattern/U.S.A. motorcycle license plates •Include black electroplated steel L-brackets and hardware •CNC-machined end caps in black or polished aluminum •Impact-resistant plastic sleeve holds documents and more PART # 3550-0164 3550-0165

DESCRIPTION Silver Black

All part numbers in BLUE are new for 2013.

SUG. RETAIL $29.95 29.95

SECTION

20

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

Paramount Platinum Cut

ENGINE Paramount Chrome

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

ONE-PIECE ALUMINUM FRONT WHEELS

•These forged wheels place the highest material strength in the same direction as the operating load, creating a light and strong wheel •Feature the contour rim lip for a graceful arc from rim to lip •Available in chrome or Platinum Cut •Platinum Cut takes the process one step farther by polishing the recut areas to a brilliant shine •Made in the U.S.A.

CABLES BRAKES TANKS & OIL FILTERS

NOTE: For matching rotors, see 2013 FatBook™ BRAKES sections.

NOTE: 09-13 FLHT, FLHR, FLHX, FLTR front applications require the use of the OEM spacers.

DESCRIPTION 23” x 3.5” for 00-07 23” x 3.5” for 08-13 23” x 3.5” for 08-13 23” x 3.5” for 08-13 23” x 3.5” for 08-13

FLTR, FLTR, FLTR, FLTR, FLTR,

FLHT, FLHT, FLHT, FLHT, FLHT,

FLHR, FLHR, FLHR, FLHR, FLHR,

FLHX FLHX FLHX FLHX FLHX

PARAMOUNT CHROME 0201-1702 0201-1651 0201-1653 0201-1698 0201-1700

w/o ABS w/ ABS w/o ABS w/ ABS

SUG. RETAIL $1,599.95 1,599.95 1,599.95 1,599.95 1,649.95

PARAMOUNT PLATINUM CUT 0201-1701 0201-1650 0201-1652 0201-1697 0201-1699

SUG. RETAIL $1,699.95 1,699.95 1,749.95 1,699.95 1,749.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES

SEALED WHEEL BEARINGS

WHEELS & AXLES

•Bearings are premium EMQ quality featuring low-drag, double-lip rubber seals that keep water out and improve grease retention •Sold each NOTE: Follow OEM-prescribed procedures for installing and checking wheel bearing end play.

PART # DESCRIPTION CUSTOM APPLICATIONS 0215-0946 Wheel bearing .75” i.d. x 1.85” o.d. x .55” wide

SUG. RETAIL $5.95

PART # DESCRIPTION CUSTOM APPLICATIONS (CONT) 0215-0947 Wheel bearing 1” i.d. x 2.04” o.d. x .59” wide

SUG. RETAIL

SAFETY WARNING: When selecting custom wheels, the tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment. Consult manufacturer’s publication(s) and/or website(s) for complete tire information.

All part numbers in BLUE are new for 2013.

$5.95

HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

101

SECTION

21

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS

HEAD BOLT KIT

•Quality hex head, hardened stainless steel bolts with a “show” corrosionresistant finish •Tensile strength rated @ 180,000 psi; superior and stronger than OEM and grade 8 fasteners •Feature precision rolled threads for optimum engagement, to prevent galling and promote more consistent torque loading •Wide underhead flange bolts and hardened chamfered washers provide even load distribution for optimum sealing of surfaces to prevent leaks •Eliminates thread problems associated with chromed and soft stainless steel hardware •Manufactured by ARP® to Feuling’s exact specifications •Kit includes all bolts required for one motor and moly assembly lubricant for installation •Made in the U.S.A. PART # 2401-0825

ENGINE

DESCRIPTION For 99-13 Twin Cam, 85-99 Evo Big Twin, 92-13 Sportster, 00-09 Buell

SUG. RETAIL $239.95

STAINLESS STEEL WIRE

•Stainless steel safety wire •1-lb. can perfect for shop or garage use •Available in .028” x 1-lb. can PART # 3850-0210

DESCRIPTION Stainless steel wire

SUG. RETAIL $28.95

TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES

DETAILER AND PROTECTANT SPRAY

•Specially formulated to provide a spectacular finish to all plastic and metal surfaces •Designed to resist the attraction of dust and dirt on the surface of parts •Formulated with inert chemicals that will not react with paint, metals or plastics but still binds well to surfaces •Tenaciously hold onto surfaces without running off •Easily removed after use and will not persist on surfaces after being properly washed off •13.5 fl. oz can, 12 per case; sold each

BRAKE PARTS CLEANER

PART # 3706-0054

PART # 3704-0189

DESCRIPTION Detailer spray

SUG. RETAIL $9.95

•Quickly removes dirt, grease, brake fluid and grime from critical brake components •Flushes away contaminants without disassembling the brake unit •High-pressure spraying, fast evaporating •Restores smooth brake operation •Non-chlorinated, hexane free •Trichloroethane free •10% VOC formula; VOC compliant in 50 states •20 fl. oz can, 15 oz. net weight, 12 per case; sold each DESCRIPTION Brake parts cleaner, 15 oz. net wt.

SUG. RETAIL $6.95

TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

102

HIGH-PERFORMANCE RACING COOLANT

•High-performance water-based racing coolant •Optimum heat transfer and cooling ability in the most extreme temperatures and operating conditions •Excellent wetting, lubricity and fluid contact with the cooling system •Biodegradable formula, environmentally safe and “green” •Non-hazardous, non-toxic formula •Premixed and ready to use, no mixing or guesswork required •Lowers water temperatures as much as 25°F •Lowers oil temperatures as much as 50°F •.5-gal. bottle •Made in the U.S.A. PART # 3705-0013

DESCRIPTION High-performance racing coolant

All part numbers in BLUE are new for 2013.

SUG. RETAIL $19.95

SECTION

21

WINDSHIELDS & FAIRINGS

2212-0434

2212-0435

TOURING AUDIO & COMMUNICATION LUGGAGE

REPLACEMENT GASKET FOR PRESSURE RELIEF PSI TESTING TOOL

SEATS & SISSY BARS

•Exact replacement gasket for PART #3801-0071 helps to ensure accurate readings over the lifetime of the tool PART # 3850-0213

DESCRIPTION Repl. gasket

EXHAUST

SUG. RETAIL $7.95

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE

REMOTE OIL PRESSURE GAUGE/LINE KITS

•Remote oil psi gauge/line kit allow mechanics or owners to check engine oil pressure using a quality liquid filled mechanical psi gauge while keeping the factory electronic gauge and/or low oil pressure indicator light hooked up •Great tool for verifying actual engine oil pressure and to compare readout of factory psi gauge •Hooks up to existing oil psi sending unit port, oil line routes up the right side frame rail, gauge fastens to the handlebars near the master cylinder •Fits all models; available in stainless/chrome or black

MAGNETIC TRANSMISSION DRAIN PLUG •1/8” NPT w/ magnetic tip •Zinc plated finish •Sold each PART # 1107-0326

DESCRIPTION For 86-99 Softail; repl. OEM # 739A

SUG. RETAIL $9.95

PART # 2212-0434 2212-0435

DESCRIPTION Stainless/chrome Black

SUG. RETAIL $129.95 129.95

GASKETS & SEALS ELECTRICAL LIGHTING HANDLEBARS, CONTROLS & MIRRORS

CLUTCH LOCK-UP TOOL

CABLES

•For use on all BDL belt drive units that have the BDL round clutch dogs •Designed to help properly torque the clutch basket and hub assembly to the mainshaft of the transmission •No need to use an impact wrench that can damage the basket, hub or other components •Made in the U.S.A. PART # 3803-0114

RING GEAR LOCK TOOL

•For use on all BDL open belt drive kits •Choose the appropriate side of the tool for your kit; one side is for open belt drives up to 06 models and the smaller, reverse side is for open belt drive kits for 07-13 models •Made in the U.S.A.

DESCRIPTION Clutch lock-up tool

SUG. RETAIL $15.95

PART # 3801-0240

DESCRIPTION Ring gear lock tool

SUG. RETAIL $30.95

BRAKES TANKS & OIL FILTERS DASHES & GAUGES

0363-0060

FRAMES, SUSPENSION & FENDERS RIMSHIELD II

FOOTRESTS & LICENSE PLATE FRAMES

•New, improved version of original RimShield •Made with genuine DuPont™ Zytel® super tough nylon resin for unmatched strength and durability •Prevents rim damage from tire levers during tire changes •Dual raised beads facilitate inserting tire lever under tire bead and prevents tire lever from slipping •Won’t mar wheels •Handholds make it easy to insert and remove •Long apron protects hands and spokes •Patented design •Sold in pairs PART # 3811-0070

DESCRIPTION RimShield® II

REPLACEMENT CO2 CARTRIDGES

WHEELS & AXLES

•16-gram cartridges in threaded and non-threaded styles •Sold in 6-packs

SUG. RETAIL $14.95

NOTE: CO2 cartridges cannot be transported on an aircraft.

HARDWARE, CHEMICALS & TOOLS

PART # 0363-0060 0363-0061

COVERS, SECURITY & GENERAL

All part numbers in BLUE are new for 2013.

DESCRIPTION Threaded Non-threaded

SUG. RETAIL $20.95 16.95

103

SECTION

21

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

TWIN SCAN II ABS PLUS KIT

•Ideal tuning aid for the Screamin’ Eagle® race tuner (SERT) and DynoJet Power Commander and Twin-Tuner •Anti-skid brake system (ABS) brake bleeding functions for 08-13 Touring models •Displays front and rear cylinder air/fuel ratio (AFR) and the required volumetric efficiency (VE) correction (in percent) with the same rpm rows and throttle position sensor (TPS) columns used in the SERT tables •Includes all features of the standard Twin Scan II •Sold as a complete kit including the WEGO3D dual-channel wide-band exhaust gas oxygen sensor interface for logging AFR data along with engine data •New version 3.0 or higher software can directly export calculated fuel correction data to Twin Tuner data files •Kit also includes two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5mm weld nuts, two 18 x 1.5mm hex socket plugs, USB cable and 3.0 or higher software on a CD-ROM •When the WEGO3D is connected, the Twin Scan II+ will log engine data along with the actual air/fuel ratio •Made in the U.S.A. NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3 ABS Plus kit’s 18mm oxygen sensors.

PART # 3807-0207

DESCRIPTION Twin Scan II ABS Plus kit

SUG. RETAIL $859.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

104

TWIN SCAN 3 ABS PLUS

•Ideal tuning aid for Screamin’ Eagle® Pro Super Tuner (SEST), Dynojet® Power Commander® (PC), and Daytona Twin Tec Twin Tuner. Twin Scan software analyzes logged data and displays front and rear cylinder air/fuel ratio (AFR) and the required volumetric efficiency (VE) correction (in percent) with the same rpm rows and throttle position sensor (TPS) columns used in fuel tables for the supported engine tuning systems •Features anti-skid brake system (ABS) brake bleeding functions •Includes all features of the standard Twin Scan 3 •Sold as a complete kit including the WEGO IIID dual channel wide-band exhaust gas oxygen sensor Interface for logging AFR data along with engine data •When the WEGO IIID is connected, the Twin Scan 3 will log engine data along with the actual air/fuel ratio (AFR). Logged AFR data can be analyzed and displayed •You can also display and print out the required volumetric efficiency (VE) correction (in percent) based on the AFR command •You can add data from an unlimited number of files that you previously saved; the data will be analyzed and incorporated into the table. Cells that vary more than ±0.5 AFR from the target value are shaded blue for rich or red for lean •You can then copy and paste the corrections into the software for the supported engine tuning systems; when used with the Twin Tuner, corrections are directly exported to the Twin Tuner file •Kit includes Twin Scan 3, WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5mm weld nuts, two 18 x 1.5mm hex socket plugs, USB cable and software on CDROM •Made in the U.S.A. NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3 ABS Plus kit’s 18mm oxygen sensors.

PART # 3807-0210

DESCRIPTION Twin Scan 3 ABS PLUS for 11-13 Softail and 12-13 Dyna models (CAN-bus systems)

All part numbers in BLUE are new for 2013.

SUG. RETAIL $859.95

SECTION

21

WINDSHIELDS & FAIRINGS TOURING AUDIO & COMMUNICATION LUGGAGE SEATS & SISSY BARS EXHAUST

TWIN SCAN COMPLETE KIT

•Includes both a Twin Scan II ABS unit for 01-13 models with J1850 data bus and a Twin Scan 3 ABS unit for 11-13 models with CAN data bus •Uses Windows XP/Vista/7 PCs for display •Reads and clears diagnostic trouble codes from ECU, BCM, ABS, speedo and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores one hour of data •Triggers when trouble code is set and shows data before and after data is set •Includes two analog inputs with 0-20V or ±200V range; Twin Scan 3 features two-channel scopemeter capability for waveform display •Analog inputs can also be used for air/flow ratio (AFR) •Complete kit includes WEGO IIID Interface, two Bosch LSU 4.2 wide-band oxygen sensors, two 18 x 1.5 mm weld nuts, two 18 x 1.5 mm hex socket plugs, USB cable, probe kit, and software on CD ROM) •Made in the U.S.A. PART # 3807-0208

DESCRIPTION Twin Scan complete kit

FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS SUG. RETAIL $1,279.95

LIGHTING

TWIN SCAN II ABS

•Provides diagnostic capabilities not found in other available tools •Anti-skid brake system (ABS) brake bleeding functions for 08-13 Touring models •Useful for diagnosing hard-to-find intermittent trouble codes •Motorcycle can be operated while unit is installed •Reads and clears diagnostic trouble codes from ECU (engine control unit), TSSM (turn signal/security module), speedometer and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores up to one hour of data; automatically triggers when a trouble code is set and shows data before and after code is set •Includes two analog inputs for air/fuel ratio (AFR) •Interfaces to a laptop PC; minimum PC requirements are 300MHz Pentium running Windows ME/XP with SVGA display (1024 x 768 pixels) and available USB port •Includes USB cable and software on CD-ROM •Made in the U.S.A. PART # 3807-0206

DESCRIPTION For 01-13 models including V-Rod and 08-13 Touring Models w/ 36-pin Delphi fuel-injection system (except 11-13 Softail and 12-13 Dyna models) and 03-06 carbureted models w/ 12-pin ignition module

HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS SUG. RETAIL $419.95

TWIN SCAN 3 ABS

•New scan tool for 11-13 models with CAN-bus •Features anti-skid brake system (ABS) brake bleeding functions •Uses Windows XP/Vista/7 PCs for display •Reads and clears diagnostic trouble codes from ECU, BCM, ABS, speedo and tach •Real-time display of engine data on instrument panel-type display •Built-in data logging; stores one hour of data •Triggers when trouble code is set and shows data before and after data is set •Includes two analog inputs with 0-20V or ±200V range; Twin Scan 3 features two-channel scopemeter capability for waveform display •Analog inputs can also be used for air/flow ratio (AFR) •Made in the U.S.A.

DESCRIPTION For 11-13 Softail and 12-13 Dyna models w/ CAN data bus (includes USB cable and software on CD ROM)

All part numbers in BLUE are new for 2013.

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS

NOTE: Models equipped with 12mm oxygen sensors will require 18mm weld nuts be installed in the exhaust system for use with the Twin Scan 3+ kit 18mm oxygen sensors.

PART # 3807-0209

ELECTRICAL

SUG. RETAIL $419.95

COVERS, SECURITY & GENERAL

105

SECTION

21

WINDSHIELDS & FAIRINGS

WATERBOY BATTERY CHARGER/MAINTAINER

•Waterproof – tested to IP68 specifications •Powerful 1A output with 14.8V max output for the new AGM battery designs; will fully charge an AGM battery •Smart microprocessor controlled with a nine-step algorithm, auto-stop and restart functions •High-efficiency switch mode transformer (120V/240V) •2V startup •Spark-proof, reverse polarity and overcharge protection •Built-in wall mount DESCRIPTION SUG. RETAIL •Includes 21” L clip and eyelet leads PART # 3807-0213 Waterboy battery charger/maintainer $52.95 •Measures 5.8” L x 2.5” W x 1.6” H

TOURING AUDIO & COMMUNICATION LUGGAGE

3807-0215

SEATS & SISSY BARS

3807-0217

3807-0214 3807-0216

EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

BATTERY CHARGER ACCESSORIES

3807-0218

DUAL FUNCTION CHARGING/ACCESSORY LEAD

•Has two circuits: one 7.5A circuit for standard maintenance charging and one 15A circuit for higher-powered accessory requirements such as heated clothing

DUAL FUNCTION ACCESSORY/CHARGING LEAD COMBO PACK

18AWG CABLE LEAD EXTENSION CABLE

•The same features as the standard Dual Function lead, plus it adapts any accessory requiring an extended-reach female cigarette-type plug accessory

•5’ L DC charging/power lead extension lets you extend your standard SAE DC charging or power lead •Can combine cables to create 10’, 15’ L or longer extensions as needed •Avoid the bulk of a 25’ extension cable if not needed

18 AWG CABLE LEAD

TWO-PIN PLUG REPLACEMENT WEATHER CAP

•Replaces lost or broken off standard SAE two-pin weather caps

•Has female cigarette socket end, 1’ 6” L PART # 3807-0214 3807-0215 3807-0216

DESCRIPTION Dual function charging/accessory lead Dual function charging/accessory lead combo pack 1’ 6” L 18AWG cable lead w/ female cigarette socket

SUG. RETAIL $21.95 28.95 7.95

SUG. PART # DESCRIPTION RETAIL 3807-0217 5’ L 18AWG cable lead extension $4.95 3807-0218 2-pin plug replacement charging/power lead weather cap 1.50

LIGHTING HANDLEBARS, CONTROLS & MIRRORS CABLES BRAKES TANKS & OIL FILTERS

BATTERY LIFT TOOL

•Allows ease of battery removal and installation in Softail models and other bikes where the battery is removed vertically •Grips the battery in the case seam on each end; works on most sealed battery brands •Not recommended for use as a battery carrier; always support the battery weight under the battery once it is accessible •All-metal construction with a durable powdercoat finish that resists battery acid damage •For use on YTX20-style batteries with 67/8” overall length PART # 3807-0203

DESCRIPTION For use on YTX20 style batteries w/ 67/8” overall length

SUG. RETAIL $29.95

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

106

NITRILE GLOVES METRIC T-HANDLE SOCKET SET

•Features chrome vanadium tool steel, deep six-point sockets and Phillips bits with carbon steel T-style handles •Sold in a set of four wrenches: 8 mm, 10 mm, 12 mm and 14 mm •Slim outside diameter allows sockets to fit in tight areas •Nickel-pewter finish PART # 3812-0045

DESCRIPTION 4-piece Metric socket set (8mm, 10mm, 12mm and 14mm)

SUG. RETAIL $24.95

•Superior puncture-, tearand chemical-resistance with excellent dexterity •100% latex-free design eliminates potential allergic reactions to latex proteins •Textured surface provides strong grip for both wet and dry applications •6 mil thickness in fingers and palm •Unique packaging designed with blue color-coded logo •Sold in pack of 100 PART # 3350-0118

All part numbers in BLUE are new for 2013.

DESCRIPTION Medium

SUG. RETAIL $19.95

SECTION 2040-1212

WINDSHIELDS & FAIRINGS

3550-0166

CARGO NETS

•Black 2.5” x 2.5” elastic mesh •Plastic hooks •Available in two sizes •Sold each PART # 3550-0166 3550-0167

2040-1213

DESCRIPTION 15” x 15” 12” x 17”

2040-0158

LUGGAGE

TRAILER LED BRITE LITES

2212-0430

HANDLEBAR MOUNT CLOCKS AND THERMOMETERS

•Feature brushed aluminum/black faces •Bezel and mount are chrome plated •Measure approximately 11/2” in diameter x 13/4” long •Available for 7/8”, 1” and 11/4” handlebars •Sold each PART # FOR 7/8” AND 1” HANDLEBARS 2212-0429 2212-0428 FOR 11/4” HANDLEBARS 2212-0431 2212-0430

DESCRIPTION

SUG. RETAIL

Clock Thermometer

$54.95 54.95

Clock Thermometer

54.95 54.95

•Work with any enclosed, open, steel and aluminum trailer •High-output LEDs are made with the highest-quality LED components and have built-in reflectors •LED lighting provides great interior 2040-0159 lighting for enclosed trailers resulting in less draw on the battery •Include bullet wire leads for plug-in applications •Work with rubber gasket or metal bezel mounts •All units are waterproof sealed •DOT/SAE approved •2050-0158 and 2050-0159 are compact strobe/flasher units designed for any vehicle that needs extra attention and feature: simple, in-line installation and complete instructions, multiple flash-patterns and timing, two channel options and can control up to 50 LED lights in one string PART # 2040-1212 2040-1213 2050-0158 2050-0159

DESCRIPTION 25’ long strip light, clear Double dome light, 28 LEDs Flasher, LED controller Flasher LED controller 2

SUG. RETAIL $149.95 39.95 19.95 29.95

BARON METAL SIGN •3-color Baron logo •Metal construction •Measures 23.5” W x 5.87” H PART # 9904-0976

DESCRIPTION Baron metal sign

TOURING AUDIO & COMMUNICATION

SUG. RETAIL $7.95 7.95

2212-0429

22

SEATS & SISSY BARS EXHAUST FUEL/AIR SYSTEMS ENGINE TRANSMISSION & DRIVELINE GASKETS & SEALS ELECTRICAL

SUG. RETAIL $28.95

LIGHTING HANDLEBARS, CONTROLS & MIRRORS DRAG SPECIALTIES FLOORMAT

CABLES

•Features a large three-color Drag Specialties logo •Measures 24” W x 40” L PART # 9904-0983

DESCRIPTION Floormat

BRAKES

SUG. RETAIL $85.00

TANKS & OIL FILTERS LA CHOPPERS SIGN

VANCE & HINES SLIP-ON MUFFLER DISPLAY

•3-color LA Choppers logo •Metal construction •Measures 23.5” W x 14.65” H PART # 9904-0977

DESCRIPTION LA Choppers metal sign

SUG. RETAIL $25.95

REPLACEMENT STOOL SEAT

•Replaces old or worn stool top •Features a three-color Drag Specialties logo on the seat •Bolt pattern 4/7.5” •Includes all mounting hardware •Measures 91/2” across •Made in the U.S.A. PART # 9904-0981

DESCRIPTION Seat

SUG. RETAIL $49.95

•One of the best ways to put Vance & Hines Slip-On Mufflers in front of your customers is with these three PART #s •PART #9903-0424 includes the eye-catching vertical legs; the heart of the display •PART #9903-0425 is the display’s base that provides innovative tilt-n-roll mobility for easy placement almost anywhere •PART #9903-0426 includes Vance & Hines literature holders along with all hardware and signage to display Twin Slash Round Mufflers, Monster Round Mufflers, Monster Oval Mufflers and Hi-Output Mufflers •Also included are two 10-packs of the current brochures •Contact your Drag Specialties sales rep to find out how to get this display at no charge •Made in the U.S.A. PART # 9903-0424 9903-0425 9903-0426

All part numbers in BLUE are new for 2013.

DESCRIPTION Display legs Display base Display top, signs, brackets, hardware and instructions

DASHES & GAUGES FRAMES, SUSPENSION & FENDERS FOOTRESTS & LICENSE PLATE FRAMES WHEELS & AXLES HARDWARE, CHEMICALS & TOOLS COVERS, SECURITY & GENERAL

107

Tires 108

TIRES Conventional 71-thread ply

Commander II® 90-thread ply is 25% more dense than conventional plies

Bead wires

COMMANDER II® CRUISER TIRES •Now available to fit many popular V-Rod models •Radically different tread pattern for head-turning looks; premium sidewall treatment complements cruiser styling •All-new rubber compounds provide remarkable wet grip without compromising durability •Square bead wires improve casing rigidity, handling and ease of installation •Amplified Density Technology, a highly dense, more-rigid tire casing, helps deliver excellent feedback and handling •Commander II tires designed for dramatically extended mileage and feature Aramid tread plies to resist centrifugal growth, reduce weight and provide excellent stability •Tubeless (TL) •W-rated for speeds up to 168 mph; V-rated for speeds up to 149 mph SIZE FRONT 120/70ZR-19

LOAD/SPEED INDEX

TL/TT

PART #

60W

TL

0301-0436

Commander II® Front

SUG. RETAIL $223.95

SIZE REAR 240/40ZR-18

Commander II® Rear

LOAD/SPEED INDEX

TL/TT

PART #

79V

TL

0302-0729

SUG. RETAIL $345.95

CONTI SPORT ATTACK 2 REAR HIGH-PERFORMANCE HYPERSPORT RADIAL TIRE

COBRA AV71 FRONT RADIAL TIRE •Features blackwall construction with a snakeskin-effect sidewall that complements the Cobra logo and tread design; a truly unique custom look •Advanced Variable Belt Density (A-VBD) rear construction uses a densely wrapped belt in the center of the tire for stability, wear and mileage, belt is less dense on the shoulder for a huge, compliant contact patch •Force Following Grooves (FFG) for reduced tire noise, increased wear resistance, improved mileage, improved stability and better resistance to cupping •Lifetime Profile Engineering (LPE) for consistent handling Cobra AV71 and stability for the full life of the tire •Wide Custom Tread Arc (WCTA) tire profile for improved maneuverability at all speeds •Enhanced Aqua Flow (EAF) tread pattern gives optimal water dispersal •Enhanced Stability System (ESS) design reduces tire flex for improved grip and stability •V-rated for speeds up to 149 mph

•Extraordinary light handling with outstanding grip and stability during cornering •Exceptional control, riding performance, and optimal feedback when riding at the limit •0°-steel belt construction front and rear for higher stability and feedback when braking and accelerating out of corners •”Black Chili” compound specially designed for supersport bikes consisting of highly structured racing black carbon for excellent cold grip and quick tire warmSport Attack 2 up, grip resins for short braking distances and silica constituents for superior wet traction •Continuous Compound Technology ensures high mileage and maximum grip in extreme lean angles up to 51° •Traction Skin, a revolutionary tactile tread surface with a microroughness that optimizes the mechanical adhesion to the road, offering the safest and fastest tire break-in available •(W)-rated for speeds over 168 mph

SIZE FRONT 140/75R17 BLK

SIZE REAR 200/55 ZR 17

LOAD/SPEED INDEX

TT/TL

PART #

67V

TL

0301-0477

SUG. RETAIL $219.95

LOAD/SPEED INDEX

TL/TT

PART #

(78W)

TL

0302-0731

SUG. RETAIL $280.95

SAFETY WARNING: For information on tire care, safety, maintenance, mounting, manufacturer’s warranty and other information consult tire manufacturer’s publication(s) and/or website(s) for complete information. The tires used for your application must have a load index and speed rating equal to or greater than the tires fitted as original equipment.

109

INDEX

A ABS brake line kits, stainless steel ............................84-85 ABS-specific front brake line kits ............................85-86 Accel Super Coil kits ............................... 56 Accutronix Forward control extension kit ............................... 97 Side mount license plate assembly .......................... 100 Air cleaner covers ............................ 45 Air cleaners/kits ............................... 44 Air filter elements, OEM style ......................................... 45 Amp power plug kit ........................ 59 Anti-freeze, high-performance racing .......... 102 AUDIO & COMMUNICATION ..........10-13 Avon Tires .............................................. 109

B Baffles for Cycle Shack exhausts ............................... 41 Bagger Budz saddlebag retaining pins/bumpers ............... 15 Banjo bolts ........................................ 85 Baron Big Air Kit (BAK) ............................. 45 Big Air Kit repl. cover................... 45 Metal sign .................................... 107 Barstool replacement seat ........................ 107 Bassani Exhausts ......................................... 38 Battery adapter hardware kit ................................... 56 Battery cables/kits .....................56-57 Battery charger/ maintainer/accessories .............. 106 Battery lift tool............................... 106 Battery/fuel gas cap gauge, LED ............................... 89 Battistinis Fairing/windshield trim ................ 5 Saddlebag latch covers ................. 8 Wireframe dash inserts ............... 91 Wireframe grilles .......................... 93 Wireframe ignition switch covers .............................. 57 Wiring harness controller........... 58 Bearings, wheel .............................. 101 Bel Ray Detailer and protectant spray, Silicone ........................... 102 Belt Drives Ltd. Belt drives ...................................... 53 Clutch lock-up tool .................... 103 Ring gear lock tool .................... 103 Belt drives ......................................... 53 Big Air Kit (BAK) ................................ 45 Big Air Kit repl. cover ...................... 45 Big bore kits...................................... 46 Biltwell Inc. Carb top covers, CV ..................... 43

110

Biltwell Inc. (CONT) Exhaust builder’s kit .................... 41 Exhaust flange kit ........................ 41 Footpegs........................................ 97 Handlebar risers ........................... 76 Handlebars................................72-73 Kung Fur grips .............................. 78 License plate/ taillight brackets ...................... 100 Points covers ................................ 50 Seat hinges .................................... 36 Seats ..........................................34-35 Stash tubes .................................. 100 Taillights/brackets........................ 64 Ten inch struts .............................. 96 Whiskey throttle assembly ....................... 78 Whiskey throttle tube ................. 78 Black Flag quickdisconnect terminals .................... 59 Bolt kit, head bolts ........................ 102 Booster wings, windshield/fairing ........................... 5 Brake calipers ................................... 82 Brake line banjo bolts ..................... 85 Brake line kits, Softail .................85-86 Brake line kits, stainless steel ABS ....................84-85 Brake master cylinder covers, front ................................... 83 Brake pads ......................................... 83 Brake parts cleaner ....................... 102 Brake rotors ...................................... 82 BRAKES ..........................................82-87 Brite-Lites Trailer LED Brite Lites ................. 107 Builder bungs ................................... 92 Builder’s exhaust kit ........................ 41 Bumpers, kickstand ......................... 93 Bungee nets ................................... 107 Bungs, builder .................................. 92 Burly Handlebars..................................... 74 Seats ............................................... 34 Shocks ............................................ 96 Slammer kit ................................... 96 Butt splices ....................................... 60

C Cable and brake line kits, café handlebar ....................... 81 Cable clamps ..................................... 81 CABLES...........................................80-81 Cables, clutch ................................... 80 Café handlebar brake line and cable kits ................................. 81 Calipers, brake .................................. 82 Cam cover ......................................... 50 Camchest kits ................................... 48 Camplate relief valve....................... 50 Cams ..............................................48-49 Carb top covers, CV ......................... 43 Cargo nets ....................................... 107 Carl Brouhard Seats/pillion pads ....................16-18 Charger/maintainer, battery ........................................... 106 Clamps, cable .................................... 81

Clamps, hose .................................... 90 Cleaner, brake parts ...................... 102 Clocks/thermometers, handlebar ...................................... 107 Clutch cable clamps ........................ 81 Clutch cables, braided high efficiency................................ 80 Clutch lock-up tool........................ 103 CO2 cartridges ................................. 103 Cobra Fi2000 Processors ......................... 43 Coil covers ......................................... 56 Coils .................................................... 56 Communicators/intercoms and accessories .........................11-13 Continental Tires .............................................. 109 Contour controls switch housings ............................. 57 Controls, handlebar ........................ 77 Conversion kit, carb to fuel injection .................... 42 Coolant, highperformance racing .................... 102 Covers, ignition switch ................... 57 COVERS, SECURITY & GENERAL ..................................... 107 Crash bars ........................................... 6 Crossover fuel lines with quick disconnects ................ 90 Custom Dynamics Slimline Magical Wizard light starter kit ........................... 68 Taillights/turn signals .................. 64 Tour-Pak® module strobes .......................... 68 Wiring cage clamps...................... 81 CV Carb top covers .......................... 43 Cycle Shack Exhaust........................................... 40 Quiet baffles .................................. 41 Cycle Smiths Saddlebag extensions, billet ........ 7

D Dash inserts ...................................... 91 DASHES & GAUGES ............................ 91 Daytona Twin Tec FI-to-carb conversion kit ............................. 42 Twin Scan tuners and accessories .................104-105 Delphi and mating connectors ....................... 59 Derby covers ..................................... 52 Detailer and protectant spray Silicone ............................... 102 Diagnostic/tuners...................104-105 Disc brake pads ................................ 83 Disc brake rotors ............................. 82 Display, mufflers ............................. 107 Dome light ........................................ 68 DP Brakes Brake pads ..................................... 83 Drag Specialties Air filter elements, OEM style ..................................... 45 Banjo bolts .................................... 85

Drag Specialties (CONT) Battery adapter hardware kit ................................ 56 Battery cables/kits ....................... 57 Braided high efficiency clutch cable ................................. 80 Brake master cylinder covers, front................................ 83 Brake rotors .................................. 82 Cable clamps ................................. 81 Cargo nets ................................... 107 Electronic speedometer sensor ................. 91 Fairing mount mirrors .................. 6 Fender skins .................................. 36 Floorboards/inserts..................... 97 Floormat ..................................... 107 Fork boots ..................................... 95 Fork seals/seals & wiper kits .................................. 55 Fork tins ......................................... 95 Fuel tank console door ............................... 91 Gas caps ......................................... 88 Handlebar mount clocks/thermometers ............. 107 Handlebars..................................... 69 Ignition coils ................................. 56 Inner primary mainshaft bearing and race ........................ 52 Kickstand bumpers ...................... 93 Magnetic transmission drain plug .................................. 103 Neck post bearing cup ................................. 93 Oil pressure gauge kit ...................................... 91 Oil tank ........................................... 90 O-ring service kit for EFI fuel lines ................................ 90 Outer primary covers .................. 51 Push-button fuel door latch ............................ 91 Repl. rubber inserts for Razor grips ............................ 78 Repl. rubber inserts for Razor pegs ............................ 98 Repl. rubber sleeves for Riptide grips ......................... 78 Repl. rubber sleeves for Riptide pegs .......................... 98 Repl. stool seat ........................... 107 Riser/top clamp kits .................... 75 Saddlebags and lids, OEM-style ..................................... 15 Sealed wheel bearings .............. 101 Seats/pillion pads ................... 21-22, 26-27, 29, 35 Shift linkages ................................. 54 Short kickstand ............................. 93 Speedometer recalibration unit ....................... 91 Spring solo seat mount kit ..................................... 36 Stainless steel ABS brake line kits .........................84-85 Turn signal mounts for forks ....................................... 67

Drag Specialties (CONT) Turn signal standoff ..................... 67 Turn signals/lenses ...................... 67 Wasp style gas tanks.................... 88 Drag Specialties/Hotop Battery lift tool ........................... 106 Oxygen sensor cover ................... 41 Drive pulleys, rear ............................ 54 Driving lights .................................... 61 Dust seals, fork ................................. 55 Dynojet Power Commander V-PTI .............................................. 42

E EBC Brakes Brake pads ..................................... 83 Eddie Trotta Designs Fork slider covers......................... 95 EFI controllers .............................42-43 EFI fuel line service kit ........................................ 90 ELECTRICAL ...................................55-60 Electronic speedometer sensor .................... 91 ENGINE...........................................46-50 Engine guard bars ............................. 6 Engine guard mount driving lights .................................. 61 Engine Tech Outer/inner primary covers .......................51-52 Engine tuners/ accessories.............................104-105 EXHAUST .......................................37-41 Exhaust builder’s kit ........................ 41 Exhaust flange kit ............................ 41 Exhausts .......................................37-41 Extended, Delrin shift peg .......................................... 98 Extension kit, forward controls ........................... 97 Extension, chrome shift peg ........................... 98

F Fairing mount mirrors ...................... 6 Fairing/windshield booster wings .................................. 5 Fairing/windshield trim ................... 5 Fender skins ..................................... 36 Feuling Camchest kits ............................... 48 Camplate relief valve ................... 50 Cams ............................................... 48 Oxygen sensors, 18mm ............................................ 43 Remote oil pressure gauge/line kits .......................... 103 Repl. gasket for pressure relief PSI testing tool............... 103 Valve spring retainer kits ................................. 47 Fi2000 Processors ............................ 43 Flange kit, exhaust .......................... 41 Floorboard mounts, passenger........................................ 97

Floorboards/inserts ........................ 97 Floormat .......................................... 107 Footpeg relocation clevis ............................. 99 Footpegs ......................................97-99 FOOTRESTS & LICENSE PLATE FRAMES .........................97-100 Fork boots ......................................... 95 Fork clamps, lighting ...................... 67 Fork leg kits ...................................... 95 Fork seals/seals & wiper kits ..................................... 55 Fork slider covers ............................ 95 Fork tins ............................................ 95 Fork turn signal mounts ................................ 67 Forward control extension kit ................................... 97 Frame, rigid Sportster .................... 92 Frames, license plate .................... 100 FRAMES, SUSPENSION & FENDERS ..................................92-96 Fuel caps ......................................88-89 Fuel door GPS/ accessory mount ........................... 11 Fuel door latch, push-button ................................... 91 Fuel filters ......................................... 90 Fuel injection to carb conversion kit ....................... 42 Fuel level gas caps ........................... 88 Fuel lines with quick disconnects ......................... 90 Fuel management controllers .................................42-43 Fuel tank console door .................................. 91 Fuel tanks .......................................... 88 FUEL/AIR SYSTEMS ......................42-45 Fuel/battery gas cap gauge, LED ............................... 89 Fuelpak .............................................. 42

INDEX

G Gas caps ........................................88-89 Gas door GPS/ accessory mount ........................... 11 Gas door latch, push-button ................................... 91 Gas filters ........................................... 90 Gas level gas caps ............................ 88 Gas lines with quick disconnects ......................... 90 Gas tank console door .................................. 91 Gas tanks ........................................... 88 GASKETS & SEALS .............................. 55 Gloves, nitrile .................................. 106 GMA Brake rotors .................................. 82 Golan Peak flow fuel filters ................... 90 Goodridge Crossover fuel lines with quick disconnects ...................... 90 Grilles.................................................. 93 Grips ................................................... 78

111

INDEX

H

J

Hand grips ......................................... 78 Handlebar controls .......................... 77 Handlebar mount clocks/thermometers................. 107 Handlebar riser bushings ................................ 76 Handlebar riser extensions ............................. 76 Handlebar risers/ top clamp kits ...........................75-76 Handlebar switch housings for Contour controls ........................... 57 Handlebar trigger levers .................................. 77 Handlebar wire harness extensions/kits .............................. 58 Handlebars ...................................69-74 HANDLEBARS, CONTROLS & MIRRORS ..................................69-79 HardBagger Dome light ..................................... 68 Roto 360° universal LED lighting ................................. 68 Trunk light kit................................ 68 Saddlebag mounting brackets, for Cycra ..................... 15 HARDWARE, CHEMICALS & TOOLS ...................................102-107 Head bolt kit ................................... 102 Headlight bezels .............................. 61 Headlight cover, tinted ..................................... 6 Headlights ......................................... 61 Heat shrink quick disconnects and terminals ................................. 60 Heel lever eliminator....................... 53 Hells Foundry Handlebar risers ........................... 76 Headlight cover, tinted .................................. 6 Side covers ...................................... 7 Helmet Communicators/ intercoms and accessories.................................11-13 Hidden trailer hitch ........................... 8 Highway bars ...................................... 6 Hogtunes Saddlebag lid speaker kits ................................. 10 Hose clamps ...................................... 90

J&M Saddlebag lid speaker kit ............ 10

I Ignition coils ..................................... 56 Ignition switch covers .................... 57 Ignition wire kits .............................. 55 Ignition wiring harnesses ........................... 58 Inner primary cover ........................ 52 Inner primary mainshaft bearing and race............................ 52 Inserts, dash ..................................... 91 Inspection cover .............................. 52 Intercoms/Communicators and accessories .........................11-13

112

K Kickstand bumpers .......................... 93 Kickstand, short ............................... 93 Kraft/Tech Inc. Frame, rigid style Sportster ...................................... 92 Küryakyn Anti-rotation passenger floorboard mounts .................... 97 Bat Lashes lighted fairing trim .................................... 5 Engine guard mount driving lights ............................... 61 Footpegs/shift pegs .................... 99 Fuel door GPS/ accessory mount ........................ 11 Informer LED fuel/ battery gauge ............................. 89 Passing lamp harness adapters ........................ 68 Sound of Chrome speakers ....................... 11 Trailer wiring harness and relay ........................................ 9 Trigger levers ................................ 77 Two-piece fork clamps ................ 67 Unicea LED taillight/ turn signal kit.............................. 65

L Latch covers, saddlebag .......................................... 8 LED, universal lighting ........................... 68 Lenses, turn signals ......................... 67 LePera Seats/pillion pads ...................19-20, 25, 33 Levers, handlebar ............................ 77 License plate assemblies/frames ...................... 100 License plate mounts/ brackets w/ taillights .................... 62 Lid speaker kits, saddlebag ........................................ 10 Lifters ................................................. 47 LIGHTING ........................................61-68 Linbar® .................................................. 6 Lindby Custom Inc. Magnumbar®/ Linbar®/Unibar® ............................. 6 Los Angeles Choppers Builder bungs ............................... 92 Café handlebar brake line and cable kits ...................... 81 Extended shift peg, Delrin ................................... 98 Footpeg relocation clevis ......................... 99 Handlebar extension wiring kit ...................................... 58 Handlebars..................................... 70

Los Angeles Choppers (CONT) Riser bushings .............................. 76 Riser extensions ........................... 76 Riser/top clamp kits .................... 75 Shift peg extension ..................... 98 Sign ............................................... 107 Low fuel light eliminator plug .............................. 89 Lowering kit ...................................... 96 LUGGAGE .......................................14-16

M Magnetic transmission drain plug...................................... 103 Magnum Brake line kits for Softail ................................85-87 Magnumbar® ....................................... 6 Maintainer/ charger, battery ........................... 106 Marker lights ..................................... 66 Master cylinder covers, front brake ...................................... 83 Memphis Fats side wings ......................................... 3 Memphis Shades Memphis Fats side wings ...................................... 3 Windshield replacement plastic .................... 4 Windshield/fairing booster wings .............................. 5 Windshields/ mounts/accessories ................3-5 Michelin Tires .............................................. 109 Mirrors ............................................... 79 Mirrors, fairing mount ................................... 6 Moose Racing Brake parts cleaner .................... 102 CO2 cartridges ............................. 103 High-performance racing coolant ........................... 102 Stainless steel wire .................... 102 Motion Pro Metric T-handle socket set .................................. 106 Nitrile gloves ............................... 106 Rimshield II .................................. 103 Stepless ear clamps ..................... 90 Motobatt Battery charger/ maintainer/accessories ........... 106 Mounting bracket for Cycra saddlebags ........................... 15 Mounts, license plate .................... 100 Muffler display ................................ 107 Mustang Passenger backrest pads .............................. 36 Seats/pillion pads .............19, 24-25, 28, 32

N Namz Amp power plug kit ..................... 59

Namz (CONT) Black Flag quickdisconnect terminals................. 59 Butt splices .................................... 60 Delphi and mating connectors .................... 59 Heat shrink quick disconnects and terminals .............................. 60 Ignition wiring harnesses ........................ 58 Quick disconnects and terminals .............................. 60 Starter solenoid connector ................... 56 Tour-Pak® Quick-Disconnect wiring harnesses ........................ 58 Tramp clamps ................................ 90 Wire spools .................................... 59 Neck post bearing cup ................... 93 Ness Shift linkage rods ......................... 53 Triple trees..................................... 94 Nitrile gloves .................................. 106 NYC Choppers Battery cables ............................... 56 Derby cover ................................... 52 Handlebars..................................... 71 Ignition wire kits .......................... 55 Taillight grilles/overlays ........................... 63 Taillight/license plate mounts............................... 62 Taillights ......................................... 63

O Oil pressure gauge kit ..................... 91 Oil pressure gauge/ line kits, remote........................... 103 Oil tank ............................................... 90 Oil tank mount stud covers ..................................... 90 Outer primary covers ...................... 51 Oxygen sensor cover ...................... 41 Oxygen sensor harness extension ......................... 41 Oxygen sensors, 18mm................... 43

P Passenger backrest pads ............... 36 Passing lamp harness adapters ........................... 68 Paul Yaffe Originals Grips ................................................ 78 Paul Yaffe’s Bagger Nation Heel lever eliminator ................... 53 License plate frame assemblies ..................... 100 Shift linkages ................................. 53 Side covers ................................ 7, 93 Performance Machine Air cleaners .................................... 44 Cam cover ...................................... 50 Countour switch housings ......................... 57 Derby cover ................................... 52 Fork leg kits................................... 95

Performance Machine (CONT) Fork slider covers......................... 95 Gas caps ......................................... 89 Handlebar controls ...................... 77 Handlebars..................................... 69 Headlight bezels ........................... 61 Inspection cover .......................... 52 Low fuel light eliminator plug ........................... 89 Mirrors ............................................ 79 Pulleys, rear ................................... 54 Rocker box covers ....................... 50 Saddlebag latch covers ................................... 8 Throttle housings ........................ 78 Throttle servo covers ................................ 44 Transmission side covers................................... 51 Wheels, one-piece aluminum front ........................ 101 Windscreen trim ............................. 5 Piston kits, big bore ........................ 46 Points covers .................................... 50 Pop-up gas caps............................... 88 Power Commander V-PTI ............... 42 Pressure relief PSI testing tool, repl. gasket.......................... 103 Primary cover, inner ........................ 52 Primary covers, outer ..................... 51 Pro One Billet air cleaner cover .............................. 45 Coil covers ..................................... 56 Foot pegs/shift pegs................... 98 Marker lights ................................. 66 Mirrors ............................................ 79 Oil tank mount stud covers .................................. 90 Shift linkages ................................. 53 Speedo cable guide, universal .......................... 81 Taillights ......................................... 64 Triple trees..................................... 94 Progressive Suspension Seats ............................................... 34 Shocks ............................................ 96 Pulleys, rear ...................................... 54 Push-button fuel door latch ....................................... 91 Pushrod kits ...................................... 47

Quick-disconnects/ terminals ....................................59-60 Quick-Disconnect wiring harnesses for Tour-Pak®................................... 58

Recalibration unit, Speedometer.................................. 91 Relief valve, camplate ..................... 50 Remote oil pressure gauge/line kits ............................. 103 Revolution Performance Big bore kits .................................. 46 Big bore piston kits ..................... 46 Rim protectors for tire changing ................................ 103 Rimshield II, tire change rim protectors ............................. 103 Ring gear lock tool ........................ 103 Riptide grips, repl. rubber sleeves ............................... 78 Riptide pegs, repl. rubber sleeves ............................... 98 Riser bushings .................................. 76 Riser extensions ............................... 76 Risers/top clamp kits ...................................75-76 Rivco Bagger Budz saddlebag retaining pins/bumpers............ 15 Trailer hitch, completely hidden ....................... 8 Trailer wiring converter, 5-to-4 wire ..................................... 9 Trailer wiring harnesses ....................................... 9 Trailer wiring isolator .................... 9 Rocker box covers ........................... 50 Roland Sands Design Derby covers ................................. 52 Exhausts ......................................... 38 Handlebars..................................... 69 Pulleys ............................................ 54 Rocker box covers ....................... 50 Seat mount bracket ..................... 36 Seats/pillion pads ........................ 16, 23-24, 28, 31-32 Taillights with license plate brackets ............................. 62 Tracker, Chrono and Vintage headlight assemblies .................................. 61 Transmission top covers.................................... 51 Venturi air cleaner faceplate ........................ 45 Rubber inserts for Razor grips ............................... 78 Rubber inserts for Razor pegs................................ 98 Rubber sleeves for Riptide grips............................. 78 Rubber sleeves for Riptide pegs ............................. 98

R

S

Racing wire ..................................... 102 Rack bag/trunk ................................ 14 Raked triple trees ............................ 94 Razor grips, repl. rubber inserts ................................ 78 Razor pegs, repl. rubber inserts ................................ 98

S&S Air cleaner kits .............................. 44 Cam kits ......................................... 49 Power Tune sport exhaust systems ......................... 41 Pushrod kits .................................. 47 Tappets ........................................... 47

Q

INDEX

113

INDEX

114

S&S (CONT) Valve spring kits ........................... 47 XL 883 to 1200 conversion kit ............................. 46 Saddlebag extensions, billet ............................. 7 Saddlebag latch covers ...................................... 8 Saddlebag lid speaker kits ..................................... 10 Saddlebag mounting brackets, for Cycra ........................ 15 Saddlebag retaining pins/bumpers................................. 15 Saddlebags and lids, OEM-style ........................................ 15 Saddlemen Luggage ......................................... 14 Seats/pillion pads .................. 16, 23, 27, 30 Waterproof paks ........................... 14 Safety wire ...................................... 102 Samson Exhaust Exhaust......................................39-40 Seat mounts/hinges ....................... 36 Seats ..............................................16-35 SEATS & SISSY BARS .....................16-36 Sena Communicators/ intercoms and accessories .....................11-13 Servo covers ..................................... 44 Shift linkage rods ........................53-54 Shift peg extender, Delrin................................................ 98 Shift peg extension, chrome ............................................ 98 Shift pegs .....................................98-99 Shocks, rear ...................................... 96 Side covers, Bagger ..................... 7, 93 Side wings for Memphis Fats windshields .............................. 3 Signs, dealer ................................... 107 Silicone detailer and protectant spray .......................... 102 Sissy bar luggage ............................. 14 Slammer kit ....................................... 96 Slimline Magical Wizard light starter kit ............................... 68 Socket set, metric T-handle ............................ 106 Spark plug wire kits ......................... 55 Speakers/ speaker kits ................................10-11 Speed Merchant Triple trees..................................... 94 Speedo cable guide, universal .......................................... 81 Speedometer recalibration unit ........................... 91 Speedometer sensor, electronic .......................... 91 Sportster frame rigid ...................... 92 Spring solo seat mount kit ........................................ 36 Spyke Grind-free starter jackshaft ......................... 56 Starter jackshaft ............................... 56

Starter solenoid connector ....................... 56 Stash tubes ..................................... 100 Stepless ear clamps ......................... 90 Stereo/communicators/ intercoms and accessories .........................11-13 Stool seat replacement ................ 107 Struts, 10” .......................................... 96 Supertrapp Exhaust........................................... 40 Switch housings for Contour controls ........................... 57

T Tail trunk luggage ............................ 14 Taillight brackets .............................. 64 Taillight grilles/overlays............................... 63 Taillight/license plate brackets .............................. 100 Taillights........................................62-65 Taillights with license plate mounts .................................. 62 Taillights with turn signals ..................................... 65 Tank, oil .............................................. 90 TANKS & OIL FILTERS ....................88-90 Tanks, gas .......................................... 88 Tappets .............................................. 47 T-handle metric socket set ...................................... 106 Thermometers/ clocks, handlebar ......................... 107 Throttle assembly ............................ 78 Throttle housings ............................ 78 Throttle servo covers...................... 44 Throttle tube .................................... 78 Tire change rim protectors ............................. 103 Tires .................................................. 109 TIRES ..........................................108-109 Todd’s Cycle Handlebars..................................... 74 TOURING ............................................6-9 Tour-Pak® module strobes ............................. 68 Tour-Pak® Quick-Disconnect wiring harnesses ........................... 58 Trailer hitches and wiring ......................................8-9 Trailer LED Brite Lites .................... 107 Trailer wiring converter, 5-to-4 wire ........................................ 9 Trailer wiring harnesses/relays .............................. 9 Trailer wiring isolator ........................ 9 Tramp clamps ................................... 90 TRANSMISSION & DRIVELINE .......51-54 Transmission drain plug, magnetic ............................. 103 Transmission top and side covers .............................. 51 Trike seats.......................................... 16 Triple trees ........................................ 94 Trunk light kit ................................... 68 Turn signal lenses ............................ 67

Turn signal mounts/clamps.............................. 67 Turn signal standoff ........................ 67 Turn signals ................................. 65, 67 Twin Scan tuners and accessories .....................104-105

U Unibar® ................................................. 6

V Valve spring kits ............................... 47 Valve spring retainer kits .................................... 47 Vance & Hines Exhausts ......................................... 37 Fuelpak ........................................... 42 Oxygen sensor harness extension ...................... 41 Slip-on muffler display .......................... 107 Venturi air cleaner faceplate ........................... 45

W Waterproof paks .............................. 14 Wheel bearings .............................. 101 WHEELS & AXLES ............................. 101 Wheels, one-piece aluminum front ........................... 101 Wide glide triple trees .................... 94 Windshield replacement plastic ........................ 4 Windshield/fairing booster wings .................................. 5 Windshield/ fairing trim ........................................ 5 WINDSHIELDS & FAIRIINGS ..............3-5 Wire harness extensions/kits .............................. 58 Wire spools........................................ 59 Wire, Racing/safety ....................... 102 Wiring cage clamps ......................... 81 Wiring connects/splices ................. 60 Wiring harness controller .............. 58

X XL 883 to 1200 conversion kit ................................ 46

When a Drag Specialties Custom Hauler shows up at your Open House, you know that legions of dedicated riders are not far behind. We appreciate the positive feedback from those who have already participated in our Dealer Event Program and want to welcome more of you. Contact your Drag Specialties Sales Rep. for details.

We Support the Sport

®

2013 FatBook™ Update Catalog ...................... Part# 9901-1444 2013 FatBook™ Update Dealer Price List ....... Part# 9901-1445

WARRANTIES AND GUARANTEES We do not guarantee the items sold by us or warrant the merchantability or fitness of purpose. Manufacturers supply their own warranties and guarantees and most of them do not permit a wholesaler or distributor to make any adjustment, replace any part or accept for return or exchange any defective or unsatisfactory item. Please follow the guarantee instructions when provided by the manufacturer. Any damages arising from the design or manufacturing of any item are the sole responsibility of the manufacturer.

CATALOG CONTENTS We believe the contents and specifications of this catalog are correct. We assume no liability for errors in listings, specifications, part numbers, prices or model applications. We reserve the right to change specifications, product descriptions, product quality, pricing and application at any time without further notice and without further obligation. The reproduction of any material from this catalog is forbidden without our written approval.

All model designations and applications used herein are determined by the manufacturer as USA-specific. Contact the individual manufacturer for additional international model information. iPad®, iPhone®, iPhoto®, iPod®, iPod classic®, iPod nano®, iPod shuffle®, iPod touch®, MacBook®, MacBook Air® and PowerBook® are registered trademarks of Apple Inc. Kevlar® brand fiber is a registered trademark of DuPont

BAD BOY, BADLANDER, BLACKLINE, BOOM!, BUELL, CLASSIC, CONVERTIBLE, CROSSBONES, CRUISE DRIVE, CVO, CUSTOM VEHICLE OPERATIONS, DARK CUSTOM, DEUCE, DUO GLIDE, DYNA, DYNA GLIDE,DYNA WIDE GLIDE, ELECTRA GLIDE, EVOLUTION, FAT BOB, FAT BOY, FAT HEAD, FORTY-EIGHT, HARLEY, HARLEY-DAVIDSON, HD, H-D, H-D HERITAGE SOFTAIL, HERITAGE SPRINGER, HYDRA GLIDE, HUGGER, IRON 883, LIGHTNING, LOW RIDER, MUSCLE, NIGHTSTER, NIGHT ROD, NIGHT TRAIN, REVOLUTION, ROCKER, ROCKERTAIL, ROAD GLIDE, ROAD KING, ROCKER, SCREAMIN’ EAGLE, SEVENTY-TWO, SLIM, SOFTAIL, SPORTSTER, SPRINGER, STREET BOB, STREET GLIDE, STREET ROD, SUPERLOW, SUPER GLIDE, THE TRICK SEAT, T-SPORT, THUNDERBOLT, TOUR GLIDE, TOUR-PAK, TRI GLIDE, TWIN CAM, TWIN CAM 88, TWIN CAM 88B, TWIN CAM 96, TWIN CAM 96B, TWIN CAM 103, TWIN CAM 103B, TWIN CAM 110, TWIN CAM 110B, ULTRA CLASSIC, ULYSSES, V-FIRE III, V-ROD, V-ROD MUSCLE, VRSC AND WIDE GLIDE ARE REGISTERED TRADEMARKS OF THE HARLEY-DAVIDSON MOTOR COMPANY, INC., MILWAUKEE, WI, U.S.A. HARLEY-DAVIDSON® AND BUELL® MOTORCYCLE MODEL DESIGNATIONS ARE UTILIZED IN THIS CATALOG FOR REFERENCE ONLY: EL, FL, FLD, FLH, FLHC, FLHF, FLHR, FLHRC, FLHRS, FLHRSI, FLHRCI, FLHRI, FLHRSEI, FLHRSE2, FLHRSE3, FLHRSE4, FLHRSE5, FLHS, FLHT, FLHTI, FLHTC, FLHTCI, FLHTCSE, FLHTCU, FLHTCUI, FLHTCUSE, FLHTCUSE2, FLHTCUSE3, FLHTCUSE4, FLHTCUSE5, FLHTCUSE6, FLHTCUSE7, FLHTCUSE8, FLHTCUTG, FLHTK, FLHX, FLHXI, FLHXSE, FLHXSE2, FLHXSE3, FLHXXX, FLS, FLST, FLSTI, FLSTC, FLSTCI, FLSTF, FLSTFB, FLSTFI, FLSTFSE, FLSTFSE2, FLSTN, FLSTNI, FLSTS, FLSTSB, FLSTSE, FLSTSE2, FLSTSE3, FLSTSI, FLSTSC, FLSTSCI, FLT, FLTC, FLTCU, FLTCUI, FLTC ULTRA, FLTR, FLTRI, FLTRSEI, FLTRU, FLTRUSE, FLTRX, FLTRXSE, FLTRXSE2, FXB, FXCW, FXCWC, FXD, FXDB, FXDBI, FXDC, FXDCI, FXDI, FXDI35, FXDF, FXDFSE, FXDFSE2, FXDG, FXDL, FXDLI, FXDS-CON, FXDSE, FXDSE2, FXDWG, FXDWG2, FXDWG3, FXDWGI, FXDX, FXDXI, FXDXT, FXE, FXEF, FX, FXLR, FXR, FXR2, FXR3, FXR4, FXRC, FXRDG, FXRS, FXRSE, FXRS-SP, FXRT, FXS, FXSB, FXSBSE, FXST, FXSTI, FXSTB, FXSTBI, FXSTC, FXSTD, FXSTDI, FXSTDSEI, FXSTS, FXSTSB, FXSTSI, FXSTSSE, FXSTSSE2, FXSTSSE3, FXWG, K, KH, WL, WLA, XL, XL 883, XL 883C, XL 883L, XL 883N, XL 883R, XL 1200C, XL 1200L, XL 1200N, XL 1200R, XL 1200S, XL1200V, XL1200X, XLCH, XLCR, XLH, XLH 883, XLH 883C, XLH 883 HUGGER, XLH 1100, XLH 1200, XL 50, XLR, XLS, XLT, XR, XR1200, XR1200X, M2, X1, S1, S2, S2T, S3, S3T, FIREBOLT XB9R, LIGHTNING, LIGHTNING CITY X, XB9S, XB9SX, XB12CG, XB12R, XB12S, XB12SS, XB12X, 1125R, XB12XT, 1125CR, VRSC, VRSCA, VRSCAW, VRSCB, VRSCD, VRSCDX, VRSCF, VRSCR, VRSCSE, VRSCSE2, VRSCX AND BLAST.

© COPYRIGHT 2013 LeMans Corporation

ALL RIGHTS RESERVED These materials may not be copied or reproduced in any manner without written permission of LeMans Corporation.

FatBook Update 2013 fourni par US Dream Import Web : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr

dragspecialties.com

Commander un accessoire ou une pièce chez US Dream Import Vous avez vu une pièce ou un accessoire : -1) Notez [Nom du catalogue] [Page du catalogue] [Référence article] et [Nom de l'article (en anglais ou en français)], -2) Envoyez-moi un E-Mail avec ces informations à info@usdream.fr en précisant dans l'objet : "Date + Devis + [Référence article] + [Nom de l'article (en anglais ou en français)] et éventuellement votre numéro de téléphone de contact" Un E-Mail vous sera adressé sous 24 h avec la disponibilité de l'article, le prix(*) livré chez vous et un lien de paiement direct, Vous n'avez plus qu'à procéder au règlement et la commande de votre accessoire sera effectuée immédiatement,

Et votre Accessoire sera chez vous dans 6 jours ! (*) Le prix du devis peut être inférieur au prix que vous avez vu, Exemple : votre accessoire est vendu 157,99 USD sur un eBook et est disponible à 103,99 USD sur un autre FlipBook de US Dream Import - Le devis envoyé sera toujours au meilleur prix disponible ! (*) Par un procédé de croisement des références disponibles, Pour information les prix indiqués sur les catalogues US sont toujours HT et compte tenu des frais de transport par avion, pour 103,99 USD sur un catalogue US vous payerez environ le même montant HT, soit 105,00 Euros (HT) + TVA (20%) + Tarif poste en France,

US Dream Import spécialiste importation de pièces et accessoires

USA Import en direct des USA depuis 1992

Fin des éditions Drag Specialties Pièces et Accessoires pour Harley-Davidson et Moto Custom - 1) FatBook 2013 - 2) FatBook Update

RETOUR AU DEBUT DU FATBOOK CLIQUEZ ICI

Printed in the U.S.A. 9901-1444

FatBook Update 2013 fourni par US Dream Import Web : http://www.usdream.fr/ Hotline : +33(0)6 60 06 46 59 E-Mail : info@usdream.fr