EU-SB Waste Incinerator

Toll-free: +1 (888) 334-1440 | Ph: + (830) 755-4768

usgr@usgr.com

SB

www.usgr.com

Maintain Biosecurity with clean efficient waste destruction.

Waste Loading and De-Ashing The range of incinerators are designed for top loading directly into the primary chamber. Loading can be manual or mechanically through digger or hydraulic bin tipper. To be loaded no more than once per day prior to operation. The incineration process will reduce the waste to approximately 3% volume, ash. The ash should be removed before the following waste is loaded to ensure optimum burn rates.

Optional de-ashing doors are available

Our Incinerators Difference

• Pre-Fabricated 0.32" & 0.4" robust mild steel casing, seam welded and suitably stiffened/ braced where necessary.

• Optimised loading chamber for maximum operational capacity.

• Lightweight resilient refractory fibre insulated lid, providing a tight seal, giving excellent thermal efficiency.

• Counterweighted loading chamber lid for ease of use.

• Primary chamber lining thickness 7" rated up-to 2642°F • Premium paint finish - Steel structures are painted using a two pack high grade paint system.

• Multi-layered refractory lining using fire bricks and insulation bricks, improving thermal efficiency.

Additional Operation Equipment

Bin Tipper

Fuel Tank

Control Panel

The Bin Tipper unit empties waste within the bin using a unique electro-hydraulic mechanism that can lift and tip more than 330lbs.

Hands free loading ensures operators safety, when dealing with hazardous waste.

Allowing you to operate the incinerator in all locations as well as providing a backup to your traditional supply.

Available in 220 to 1100 gallon capacity. Fuel can be safely stored in close proximity to your incinerator.

Specially designed control panels, to manage your incineration. Pre-programmed and able to be manually adjusted for optimal results.

Push button and touch screen control with optional data logging system.

US GLOBAL RESOURCES 80 YEARS OF SERVICE TO A GROWING WORLD +1 (888) 334-1440 | Ph: +1 (830) 755-4768

All information should be used as a guide only, specifications are subject to change without notice.

41.3in

78.7in 135in

PLAN VIEW

Measurements in Inches (in)

ISOMETRIC VIEW

THIRD ANGLE PROJECTION (UNLESS STATED OTHERWISE) TOLERANCES

MATERIAL:

(UNLESS STATED OTHERWISE)

N/A

WHOLE NUMBERS ±1.00

FINISH:

1 DECIMAL PLACE ±0.10 2 DECIMAL PLACE ±0.05

N/A

ANGLES ±0.50°

9479 LBS

84.4in

159in

120in

WEIGHT:

DRAWN BY: KJ

DATE CREATED:

28/03/2019

PROJECT:

STANDARD - EU-SB 61.4in

FRONT VIEW OPEN LID

52.8in 114in

TITLE:

EU-SB-GA

SIDE VIEW

D

DATE

DRAWN

CHECKED APPROVED

COMMENTS

C

DATE

DRAWN

CHECKED APPROVED

COMMENTS

B

DATE

DRAWN

CHECKED APPROVED

COMMENTS

A

DATE

DRAWN

CHECKED APPROVED

COMMENTS

-

DATE

DRAWN

28/03/2019

KJ

CHECKED APPROVED

HB COMMENTS

FIRST ISSUE

HB

DRAWING No.

REV

4-001-2

SHEET No.

1 OF 1

-

SCALE:

1:40

A3