Shan, Z., Porter, I., Nemcik, J. & Baafi, E. (2014). Comparing the reinforcement capacity of welded steel mesh and a thin spray-on liner using large scale laboratory tests. International Journal of Mining Science and Technology, 24 (3), 373-377. Shan, Z., Porter, I., Nemcik, J. & Qiao, Q. (2014). Effect of different curing conditions on the compressive and flexural properties of Paris. 14th Coal Operators Conference (pp. 103108). Australia: University of Wollongong. Sharafi, P., Hadi, M. N. S. & Teh, L. H. (2014). Geometric design optimization for dynamic response problem of continuous reinforced concrete beams. Journal of Computing in Civil Engineering, 28 (2), 202-209. Sharafi, P., Teh, L. H. & Hadi, M. N. S. (2014). Conceptual design optimization of rectilinear building frames: a knapsack problem approach. Engineering Optimization, Online First 1-21. Sharafi, P., Teh, L. H. & Hadi, M. N. S. (2014). Shape optimization of thin-walled steel sections using graph theory and ACO algorithm. Journal of Constructional Steel Research, 101 331-341. Sheikh, M. Neaz. & Légeron, F. (2014). Performance based seismic assessment of bridges designed according to Canadian Highway Bridge Design Code. Canadian Journal of Civil Engineering, 41 (9), 777-787.
RESEARCH
Shon, H. Kyong., Nghiem, L. Duc., Kim, S., Chiemchaisri, C., Aravinthan, V., Virkutyte, J., Shu, L. & Jegatheesan, V. (2014). Special issue on the challenges in environmental science and engineering-CESE-2012 9¿13 September 2012, RACV City Club, Melbourne, Australia. Desalination and Water Treatment, 52 (4-6), 555-555. Simon, A. R., Fujioka, T., Price, W. & Nghiem, L. (2014). Sodium hydroxide production from sodium carbonate and bicarbonate solutions using membrane electrolysis: A feasibility study. Separation and Purification Technology, 127 (April), 70-76. Su, L., Lu, C., Deng, G., Tieu, A. Kiet., Zhang, L., Guagliardo, P., Samarin, S. & Williams, J. (2014). Vacancy-type defects study on ultra-fine grained aluminium processed by severe plastic deformation. Science of Advanced Materials, 6 (7), 1338-1345. Sun, Q. D., Indraratna, B. & Nimbalkar, S. (2014). Effect of cyclic loading frequency on the permanent deformation and degradation of railway ballast. Geotechnique: international journal of soil mechanics, Online First Sun, Y., Indraratna, B. & Nimbalkar, S. (2014). Threedimensional characterisation of particle size and shape for ballast. Geotechnique Letters, 4 (3), 197-202. Sun, Y., Xiao, Y. & Ju, W. (2014). Bounding surface model for ballast with additional attention on the evolution of particle size distribution. Science China Technological Sciences, 57 (7), 1352-1360.
Teh, L. H. & Gilbert, B. P. (2014). Net section tension capacity of equal angle braces bolted at different legs. Journal of Structural Engineering, 140 (6), 06014002-1-06014002-5. Teh, L. H. & Uz, M. (2014). Effect of loading direction on the bearng capacity of cold-reduced steel sheets. Journal of Structural Engineering, Online First 06014005-1-06014005-5. Teh, L. H. & Uz, M. (2014). Ultimate shear-out capacities of structural steel bolted connections. Journal of Structural Engineering, 04014152-1-04014152-9. Tennakoon, N. & Indraratna, B. (2014). Behaviour of clay-fouled ballast under cyclic loading. Geotechnique: international journal of soil mechanics, 64 (6), 502-506. Tennakoon, N., Indraratna, B. & Nimbalkar, S. (2014). Impact of ballast fouling on rail tracks. Second International Conference on Railway Technology: Research, Development and Maintenance (pp. 1-11). Scotland: Civil-Comp Press. Tran, T. M., Hadi, M. N. S. & Pham, T. M. (2014). A new empirical model for shear strength of reinforced concrete beam¿column connections. Magazine of Concrete Research, 66 (10), 514-530. Trani, L. D. & Indraratna, B. (2014). A procedure to assess subballast filtration under cyclic loading. Second International Conference on Railway Technology: Research, Development and Maintenance (pp. 1-11). Scotland: Civil-Comp Press. Tu, K. L., Chivas, A. R. & Nghiem, L. D. (2014). Effects of chemical preservation on flux and solute rejection by reverse osmosis membranes. Journal of Membrane Science, 472 202-209. Uz, M. & Hadi, M. N. S. (2014). Optimal design of semi active control for adjacent buildings connected by mr damper based on integrated fuzzy logic and multi-objective genetic algorithm. Engineering Structures, 69 (June), 135-148. Venticinque, G. & Nemcik, J. (2014). New fracture model for the progressive failure of rock slopes. 2014 Coal Operators’’ Conference (pp. 82-88). Australia: University of Wollongong. Venticinque, G., Nemcik, J. A. & Ren, T. X. (2014). A new fracture model for the prediction of longwall caving characteristics. International Journal of Mining Science and Technology, 24 (3), 369-372. Vinod, J., Hyodo, M., Indraratna, B. & Kajiyama, S. (2014). Shear behaviour of methane hydrate bearing sand: DEM simulations. In K. Soga, K. Kumar & G. Biscontin (Eds.), 2014 IS Geomechanics from Micro to Macro (IS-Cambridge 2014) (pp. 355-359). United Kingdom: CRC Press - Taylor and Francis. Wang, G. F., Ren, T. X. & Cook, C. (2014). Goaf frictional ignition and its control measures in underground coal mines. In X. He, H. Mitri, B. Nie, Y. Wang, T. X. Ren, W. Chen & X. Li (Eds.), Progress in Mine Safety Science and Engineering II: Proceedings of the 2nd International Symposium of Mine Safety Science and Engineering (pp. 451-459). United Kingdom: Taylor & Francis Group.
78 SCHOOL OF CIVIL, MINING AND ENVIRONMENTAL ENGINEERING