Universal Calibration Services Pvt. Ltd. - Brochure

Certificate No: CC-2412

PUNE (H.O.) Ph. No. E-mail Website

: Plot No. G 43/1 & 2, G 44/1 & 2, G-Block, Ajanta Nagar, Behind Kasturi Market, MIDC Chinchwad, Pune - 411019 MAHARASHTRA INDIA. : (020) 67115100 / 67115127 / 67115124 Mob.: 9822006244 / 9822001300 : pune@universalinstruments.co.in / mkt@universalinstruments.co.in : www.universalinstruments.co.in www.universalcalibrationservices.com

UNIVERSAL CALIBRATION SERVICES PVT. LIMITED was founded in 1995 as a calibration laboratory. Since then, we have

steadily grown by adding many new capabilities including primary and secondary instrumentation to become India's premier full-service calibration laboratory. We provide calibration services to our customers in either our own environmentally controlled multi-laboratory facility or on-site at their location. We are currently performing Electro-Technical, Temperature, Mechanical-Dimensional & Pressure Instruments, Torque, Mass & Volume Vibration & Accelerometer Calibration Services.

Universal Calibration Services Pvt. Limited Laboratory accredited to NABL for Electro-Technical, Temperature, Mechanical-Dimensional & Pressure Instruments,Torque, Mass & Volume as per ISO/IEC 17025 We issue individual calibration certificate for each calibrated Instrument Our master Instruments are traceable to National / International Standards We have quality calibration instruments like UNIVERSAL CALIBRATOR WAVETEK DETRON 9100, Transmille (UK), FLUKE CALIBRATOR & 8 ½ PRECISION MULTIMETER, ISOTECH (UK), AMETEK JOFRA TEMPERATURE DRY BLOCK CALIBRATOR having Range -65 BELOW Amb.TO 1200°C, SYLVAC, CRYSTAL CARPORATION (USA), Octagon LMM-300 etc.

OUR VALUABLE CUSTOMERS ARE TATA MOTORS LTD, PUNE (V.CODE: U61500)

LARSEN & TOUBRO LTD. (V. CODE- UNIV024)

THERMAX LTD, PUNE

BAJAJ ELECTRICALS LTD. (V. CODE- 42848)

FIAT INDIA AUTOMOBILES (P) LTD. (V.CODE 800891)

MAHINDRA VEHICLE MANUFACTURING LTD.

VOLKSWAGEN INDIA (P) LTD.

BADVE ENGINEERING LTD.

FORCE MOTORS LTD. (V.CODE-V091092G)

FLASH ELECTRICAL LTD. ( V. CODE - 400542

PREMIER SEALS (INDIA) LTD.

LUMAX GROUP

JOHN DEERE INDIA (P) LTD, PUNE (V.CODE-338975)

MAHLE BHER INDIA PVT. LTD.

AUTOMOBILE CORPORATION GOA LTD.(V.CODE-40001323)

MINDA VAST ACCESS SYSTEM PVT. LTD. (V.CODE- 1U0003)

STAR CIRCLIP & ENGG. LTD.

RINDER INDIA PVT. LTD. ( V.CODE- 4005830)

HINDUSTAN PETROLEUM CORPORATION LTD.

TRACK COMONENTS LTD.(V.CODE-1U-0021)

SUB DIVISIONAL ENGINEERS ( GOVT. OF MAH)

CUMMINS GROUP

TATA COMMUNICATION LTD. MUMBAI

MUTUAL INDUSTRIES LTD. (V. COE- VU035)

MENON PISTON LTD., KOLHAPUR

TATA AUTOCOMP GY BATTERIES PVT. LTD.

EMERSON CLIMATE TECHNOLOGY LTD.

FLAMININGO PHARMACEUTICALS LTD.

SUN PHARMACEUTICAL INDUSTRIES LTD.

SUZLON ENERGY LED. (V. CODE- 800173)

EMCURE PHARMACEUTICAL LTD. (V.CODE- 705350)

HIKAL LTD. ( V.CODE- 11009)

LUPIN LTD.

SAI LIFE SCIENCES LTD.

HONEYWELL AUTOMATION LTD.

MAHARASHTRA STATE POWER GENERATION CO. LTD.

VARROC ENGINEERING PVT. LTD.

WHIRLPOOL OF INDIA LTD.

USV PVT. LTD.

NIPRO INDIA CORPORATION PVT. LTD.

AND MAY BE YOU

One-stop solution for all your calibration requirements CALIBRATION LABORATORY for wide range of Electro-Technical, Temperature, Mechanical-Dimensional & Pressure Instruments,Torque, Mass & Volume, Vibration & Accelerometer

FACILITY EXIST FOR PRESSURE(ON SITE)

THERMAL-TEMPERATURE

PRESSURE GAUGE VACUUM GAUGE PRESSURE INDICATOR VACUUM INDICATOR COMPOUND PRESSURE GAUGE ABSOLUTE (ABS) PRESSURE GAUGE ABSOLUTE (ABS) PRESSURE INDICATOR ATMOSPHERIC PRESSURE INDICATOR ATMOSPHERIC PRESSURE GAUGE BAROMETER PRESSURE INDICATOR BAROMETER PRESSURE GAUGE MANOMETER MEGNEHELIC GAUGE PRESSURE SWITCH DIFFERENTIAL PRESSURE (D.P.) SWITCH PRESSURE TRANSMITTER PRESSURE TRANSDUCER PRESSURE SENSOR DIFFERENTIAL PRESSURE (D.P. ) TRANSMITTER U TUBE MANOMETER DEAD WEIGHT TESTER SAFETY VALVE PRESSURE GAUGE of CO2 WELDING MACHINE REGULATOR

TEMPERATURE SENSOR (ON SITE)

THERMAL-HUMIDITY DIGITAL THERMO-HYGRO METER DIGITAL THERMO-HYGRO INDICATOR (ON SITE) DIGITAL TEMPERATURE HUMIDITY SENSOR (ON SITE) DIGITAL TEMPERATURE HUMIDITY TRANSMITTER (ON SITE) DIGITAL TEMPERATURE HUMIDITY INDICATOR (ON SITE) WIRELESS TEMP DATA LOGGER HUMIDITY METER HUMIDITY INDICATOR (ON SITE) HUMIDITY CHAMBER (ON SITE)

THERMAL-TEMPERATURE MAPPING (ON SITE) TEMPERATURE MAPPING FOR FURNACE TEMPERATURE MAPPING FOR OVEN TEMPERATURE MAPPING FOR BOD INCUBATOR TEMPERATURE MAPPING FOR FREEZER/REFREEZER TEMPERATURE MAPPING FOR STABILITY CHAMBER TEMPERATURE MAPPING FOR BLOOD STORAGE UNIT TEMPERATURE MAPPING FOR COLD ROOM TEMPERATURE MAPPING FOR WAREHOUSE TEMPERATURE MAPPING FOR AUTOCLAVE TEMPERATURE & HUMIDITY MAPPING FOR WAREHOUSE, COLD ROOM, STABILITY CHAMBER ETC. TTR FOR POWDER COATING OVEN

TORQUE TORQUE TORQUE TORQUE TORQUE

WRENCH DRIVER METER TESTER

VOLUME MICROPIPETTE PIPETTE BURETTES MEASURING CONICAL FLASK MEASURING CYLINDER

ACCOUSTICS SOUND LEVEL DB METER

ELECTRO-TECHNICAL (ELECTRICAL)

TEMP.INDICATOR/CONTROLLER (ON SITE) PT-100 (ON SITE) TEMP.RECORDER (ON SITE) TEMP.SCANNER/DATA LOGGER (ON SITE) RTD TEMPERATURE SENSOR (ON SITE) CP CONTROLLER (ON SITE) THERMOCOUPLE-SIMPLEX (ON SITE) CP RECORDER/ mV MONITOR (ON SITE) THERMOCOUPLE-DUPLEX(ON SITE) TEMPERATURE TRANSMITTER (ON SITE) DIGITAL TEMPERATURE INDICATOR WITH SENSOR(ON SITE) DIGITAL TEMPERATURE INDICATOR WITH PT-100 SENSOR(ON SITE) DIG. FLOW IND. TOTALIZER (ON SITE) PROCESS IND./CONT (ON SITE) DIGITAL TEMPERATURE INDICATOR WITH RTD SENSOR(ON SITE) AC/DC VOLT METER (ON SITE) DIGITAL TEMPERATURE INDICATOR WITH THERMOCOUPLE AC/DC AMMETER GLASS THERMOMETER FREQUENCY METER DIAL THERMOMETER DIGITAL THERMOMETER VARIABLE FREQUENCY DRIVE (VFD) TEMPERATURE GAUGE (ON SITE) WELD TESTER MAX-MIN GLASS THERMOMETER CURRENT TRANSFORMER(CT) DRY WET THERMOMETER POTENTIAL TRANSFORMER(PT) PSYCHROMETER COUNTER TEMPERATURE SWITCH (ON SITE) LENGTH COUNTER INFRARED THERMOMETER (IR THERMOMETER)/PYROMETER ORP INDICATOR (ON SITE) PYROMETER pH METER (ON SITE) TEMPERATURE TRANSMITTER WITH SENSOR (ON SITE) CONDUCTIVITY METER (ON SITE) TEMPERATURE LIQUID BATH (ON SITE) TDS METER TEMPERATURE WATER BATH (ON SITE) 3.5 & 4.5 MULTIMETER TEMPERATURE DRY BLOCK CALIBRATOR (ON SITE) 5.5 & 6.5 MULTIMETER POWDER COATING OVEN (ON SITE) AC/DC CLAMP METER BOD INCUBATOR (ON SITE) AC/DC TONG TESTER FREEZER /REFREEZER (ON SITE) AC / DC POWER CLAMP METER STABILITY CHAMBER (ON SITE) POWER SUPPLY (CURRENT & VOLT) BLOOD STORAGE UNIT (ON SITE) OSCILLOSCOPE MULTIFUNCTION CALIBRATOR MFI TESTER (ON SITE) LCR METER DEW POINT METER (ON SITE) FUNCTION GENERATOR SOLDERING GUN/STATION (ON SITE) SHUNT SOLDERING BATH (ON SITE) MICRO OHM METER BAKING OVEN (ON SITE) RESISTANCE METER HOT AIR OVEN (ON SITE) RESISTIVITY METER FURNACE (ON SITE) DECADE RESISTANCE BOX MUFFLE FURNACE (ON SITE) CAPACITANCE DECADE BOX PORTABLE ELECTRO DRYING OVEN (ON SITE) DIMMER STAT HEATING MENTAL (ON SITE) VARROC LUX METER FLOW METER (ON SITE) LUX TESTING AT CUSTOMER’S WORKSTATION GAS FLOW METER FOR CO2 WELDING MACHINE RTD SIMULATOR GAS FLOW METER CAPACITANCE METER ROTAMETER HIGH VOLTAGE TESTER (ON SITE) WATER FLOW METER HIGH VOLTAGE PROBE DIESEL/PETROL/OIL FLOW METER HIGH VOLTAGE INSULATION TESTER FLOW/ LEVEL TRANSMITTER (DPT) IR TESTER ANEMOMETER MEGGER AIR VELOCITY METER EARTH TESTER ACCELERATION & SPEED INSULATION TESTER ACCELEROMETER (Uni & Tri) WELDING RECTIFIER (ON SITE) ACCELERATION SENSOR (Uni & Tri) WELDING TRANSFORMER (ON SITE) WHOLE-BODY SENSOR CO2 WELDING MACHINE (ON SITE) VIBRATION METER ARC WELDING MACHINE (ON SITE) VIBRATION TEST AT CUSTOMER’S WORKSTATION PER POINT TACHOMETER TIG WELDING MACHINE (ON SITE) RPM METER PROJECTION WELDING MACHINE (ON SITE) STROBOSCOPE SPOT WELDING MACHINE (ON SITE) SPEEDO METER (ON SITE) MEG WELDING MACHINE (ON SITE) CENTRIFUGE (RPM) (ON SITE) AC /DC WATT METER CONVEYOR SPEED METER (ON SITE) V-A-W METER 1Ф ENERGY METER (LT) (ON SITE) MASS & BALANCE, FORCE 3Ф ENERGY METER (LT) (ON SITE) WEIGHTS BOX 1Ф ENERGY METER (HT) (ON SITE) WEIGHTS 3Ф ENERGY METER (HT) (ON SITE) DIGITAL BALANCE (ON SITE) POWER ANALYZER SPECIFIC GRAVITY BALANCE (ON SITE) TIMER (ON SITE) DIGITAL ANALYTICAL BALANCE (ON SITE) PUSH PULL METER STOP WATCH LOAD CELL ( S TYPE ) HOUR METER FORCE METER WALL CLOCK

If you don't see the type of calibration you need, that doesn't mean we can't do it.

Give us a call to learn more about our full list of calibration services

DIMENSION VERNIER CALIPER

GAP GAUGE

(PLAIN/DIAL/DIGITAL)

PLAIN RING GAUGE

VERNIER HEIGHT GAUGE

SETTING RING GAUGE

(PLAIN/DIAL/DIGITAL)

TAPER PLAIN RING GAUGE

VERNIER DEPTH GAUGE

THREAD PLUG GAUGE

EXTERNAL/OUTSIDE MICROMETER

TAPER THREAD PLUG GAUGE

FLANGE/POINT MICROMETER

THREAD RING GAUGE

BALL POINT MICROMETER

TAPER THREAD RING GAUGE

BLADE MICROMETER

TAPER THREAD PLUG GAUGE

DEPTH MICROMETER

STANDARD LENGTH BAR

INSIDE MICROMETER

PIN GAUGE BOX

THREAD PITCH MICROMETER

THREAD MEASURING WIRE

3 POINT MICROMETER

HEGMAN GAUGE

INCLINOMETER

STEP GAUGE

DIGITAL PROTECTOR

FEELER GAUGE

BEVEL PROTECTOR

SLIP GAUGE

COMBINATION SET

WIRE GAUGE

DEGREE PROTECTOR

RADIOUS GAUGE

PLUNGER DIAL

THREAD PITCH GAUGE

LEVER DIAL

PRECISION SQUARE.

BORE GAUGE

RIGHT ANGLE

DIAL THICKNESS GAUGE

TRI SQUARE

DFT METER

V-BLOCK

PAINT THICKNESS GAUGE

SURFACE PLATE (ON SITE)

ELCOMETER PAINT THICKNESS

CROSS HATCH TESTER

ULTRASONIC THICKNESS GAUGE

WELDING GAUGE

MEASURING TAPE

FORD CUP/ VISCOCITY CUP/ B4 CUP WELD FILLET TESTER (WFT)

MEASURING SCALE

CALIPER CHECKER

STEEL SCALE SHORE HARDNESS TESTER A & D

DIAL SNAP GAUGE ANGLE PLATE

PISTOL CALIPER SPIRIT LEVEL BOTTLE ELECTRONICS LEVEL BOTTLE

TEST SIEVES SURFACE ROUGHNESS TESTER MANDRELS

LVDT PROFILE PROJECTOR (ON SITE) PROBE WITH DRO

COMPARATOR STAND

MECHANICAL TESTING MACHINES(ON SITE) UNIVERSAL TESTING MACHINE

DIGITAL /DIAL CAMPARATOR DIAL CALIBRATION TESTER PI TAPE

VICKER’S HARDNESS TESTING MACHINE MICRO VICKER’S HARDNESS TESTING MACHINE BRINELL HARDNESS TESTING MACHINE

PLAIN PLUG GAUGE

ROCKWELL HARDNESS TESTING MACHINE

WIDTH/O.D/ PADDLE /SETTING

TENSILE TESTING MACHINE

CYLINDRICAL/MASTER/

IMPACT TESTING MACHINE

KEYWAY GAUGE/HEIGHT MASTER

COMPRESSION / UNIVERSAL TESTING MACHINE

PLAIN, TAPER PLUG GAUGE

LOAD VERIFICATION FOR HARDNESS

SNAP GAUGE

TESTING MACHINE

MUMBAI

: Building No.D-2, 0.10 D Type Building, Opp. Apna Bazar, Sect.No.1,Vashi, Navi Mumbai - 400 703 MAHARASHTRA INDIA. Ph. No.: 022 64522794,9225603894, 9822006244, 9011023770

KOLHAPUR

: Shiroli MIDC, 1st Phata, Plot No.-69, Ambedkar Nagar, Opp.Gadre Tea co. Godown, Nagaon, Kolhapur-416122 MAHARASHTRA INDIA. Ph.No. : (0231) 6511745, Telefax :-(0230) 2460897, 8975766487,8975766475, 9822006244, 9011023770