How To Tell If Your Audi Catalytic Converter is Going Bad in Tolleson?

How To Tell If Your Audi Catalytic Converter is Going Bad in Tolleson?

In general, the catalytic converter is a crucial part of the emission system in your Audi that can reduce the emissions produced from your car to protect the environment. Moreover, the converter is located between the engine and muffler in the exhaust. It is filled with a chemical catalyst for converting the gas emissions in the exhaust system to less harmful gases.

When the catalytic converter of the car is failed, the exhaust gases are unable to get through the muffler means it can't get out of the rear and vent. Over time, the car will produce higher emissions and fail the engine due to the lack of the right mixture of air and fuel. The following points define the signs of a bad catalytic converter in your Audi.

Fail the emission test In fact, the catalytic converter is an important part of the exhaust system which is responsible for producing healthy emissions from the car. But, when it is failed, your car will produce a higher amount of carbon emissions from the exhaust system that can result to fail the emission test.

Your car will fail the emission test for many other reasons such as contaminated antifreeze or engine oil. Neglecting the problem for longer may make your car illegal to drive on the roads of different states like Tolleson. Due to these reasons, you have to perform the emission test of your Audi annually.

Reduce acceleration power When the catalytic converter of the car is clogged, you will notice that your car losing power while going uphill or accelerating. The acceleration power of the car is also reduced for many other reasons, so the mechanics failed to diagnose the real causes behind the loss of power which is somehow connected to the catalytic converter.

One can easily determine the condition of the catalytic converter by checking the exhausting status with hands. Put your hand at the tailpipe, if you feel a hot exhaust flow from the system and then check the catalytic converter by a mechanic.

Activated check engine light Thus, the illuminated check engine light on the dashboard clearly lets you know about the problems in the specific parts. Now in many models of Audi, the failed catalytic converter also

triggers the check engine light because the tailpipe is emitting harmful carbon emissions to the environment which is identified by the air to fuel ratio sensor.

Through the onboard diagnostic test, you can easily recognize the causes behind the activated check engine light. The warning light also comes on when the catalytic converter is failed due to the bad spark plugs. So, perform a scheduled inspection of the car to determine the potential problems.

Engine misfiring Like the other signs, the engine misfiring is also a clear sign of failed catalytic converter in your Audi. In reality, the engine misfiring occurs due to the incomplete combustion within the cylinder and the interrupted combustion process are completely implying the non-functional catalytic converter in your car.

Subsequently, the clogged catalytic converter will overheat the engine and fail it eventually. So, whenever you will experience engine misfiring problems in your car contact a reputed mechanic for either repairing or replacing the catalytic converter.

Reduce engine performance and fuel mileage Moreover, the reduced engine performance is another sign of failed catalytic converter in your car. Generally, the bad converter will create backpressure that can lower down the engine performance automatically. When it happens, you will notice that the engine is shaking frequently and even stall in the middle of the road.

Besides other signs, the failed catalytic converter is also responsible for increasing the fuel consumption of the car. In this case, the engine is receiving very little oxygen that can consume more fuel to run properly. Over time, the fuel mileage of the car is reduced and you need more gallons of fuel to fulfill the demands of the car.

Conclusion Whenever you will notice any of the above-defined signs in your car, take it to a professional for proper inspection and diagnosis. In this way, your mechanic will determine the real causes behind the failed catalytic converter of your Audi and repair or replace it when required. So, it’s always advisable to perform the scheduled service and maintenance of the car for smooth functioning.