PROCESS SEWING A JACKET LINING WITH FACINGS AND COLLAR
4
1
5 2
6
3 7
1. Assemble all pieces needed for this procedure. You will need a front facing pieces in fabric, front and back lining pieces, undersleeve and topsleeve lining pieces and an undercollar in fabric.
4. Using a 1cm seam allowance, sew down to the start of the vent opening.
2. Sew the darts into the back pieces.
6. Press.
3. Press the darts towards the centre back.
7. Put the sleeve linings into pairs.
Š Karen Ferry and Rosemary White
5. Sew down the centre back tuck approximately 5cm.