Page 1


/ Contents Alive

04 / 11

Electric Vehicles: An Anticipated Hit in China

Going up: Lift and Elevator Energy Efficiency Verification

Who Should be Responsible for the Frequent "Quality Scandals"?

04/ 09

Is Lean Meat Powder Acceptable?

10/ 11

Featured Service

12 / 35

Recycled Material Verification Service and Introduction to a Trend

CSR Pacing from Organizational Innovation to Product / Service Innovation– Sharing, Cooperation, Win-win

AMICCOM A7153 Chip Tested by TÜV Rheinland Granted RF4CE Certificate by ZigBee Alliance

TÜV Rheinland Providing the Latest TCO Certified Displays 6.0 Testing

Chongqing, a Key City in Western China

12/ 13 14/ 15 16/ 17 18 19

20/ 23 24/ 27

Auman GTL Became the 1st Chinese EN Heavy Truck

28/ 29

CNPV was Issued the First ISO14067 Certificate in the Photovoltaic Industry

30/ 31

The First Switch Witness Laboratory Certificate of 2012 was Issued

32/ 33

XIHARI Awarded CBTL Certificate

34/ 35

Technical Expertise

36 / 41

Advanced-Level Product Material Identification

36 37

N e w Te s t i n g S e r v i c e H a r m f u l Organophosphorus Compounds (OPC) in Plastic Products


Standard Update for Measurement, Control, and Laboratory Use Electrical Equipment in the Scope of IEC/EN 61010-1

Global News Flash

38/ 41

Sichuan Teacher Training: 1st Module Completed

Successful Tree-planting Activity in Qingdao

44 45

42 / 43 42

Mori Seiki was Issued Certificate for Radiation Monitoring and Control Process

TÜV Rheinland Acquires Korean Specialist Service Provider for Nuclear Technology

Vodafone Receives Certificate for its Business Continuity Management

Voluntary First Aid Training with Red Cross


46 / 49

Training and Consulting Schedule


Training and Consulting 2012 Jun-Aug Schedule

編輯團隊 Credit

TÜV Rheinland’s Expert Team Starts Technical Acceptance for New Berlin Brandenburg Airport

43 How to contact us

Social Responsibility

44 / 45

HK Staff Joined Standard Chartered HK Marathon



46/ 49


Who Should be Responsible for the Frequent

"Quality Sca


andals"? Earlier this year, several reports indicated that milk produced by a famous brand in China contained additives that were harmful to human health. While the memory and effects of this incident still lingered, new product quality scandals involving leading Chinese companies created further stress for consumers and brought stainless steel cookware, floor products and drug under the public spotlight. What is at the root of such incidents – manufacturers’ lack of awareness of their safety responsibilities, cost considerations, the limitations of the relevant laws, regulations or standards, or the accountability of the testing and supervising departments? This is a difficult question to answer. Yet the insights from these scandals reveal that the mechanism intended to g u a r a n t e e p r o d u c t q u a l i t y a n d s a f e t y – i n v o l v i n g manufacturers, testing and certification bodies, official standardsetting organisations and consumers – is far from satisfactory.


Empowering consumers with the right information via convenient resources, represents an important step in raising awareness of product safety.


The potential consequences surrounding these incidents deserve further consideration and hint further implications. One key observation is that the companies involved are large-scale industry leaders. Attention is rarely paid to small producers. If the safety quality of high-end brands is questioned, who can consumers trust? Problems with stainless steel cookware cause consumers to wonder whether similar problems exist with other stainless steel food containers. The industrial glues in flooring emit toxic gases. Can we be sure that all products using such glues are closely monitored for uncontrolled emissions? Other than capsules, are the other packages for drugs qualified? Another observation from these cases is that when confronted by questions from the media, the companies quoted test results from some international certification body as the basis for their defense. This may be regarded as a sign of progress, as the media have the right to pose questions and companies should be able to back up their testimony with proof. Although quoting testing results from an international certification body should become routine, many media do not really understand the process and legal bearing of such certificates and cannot differentiate between official and non-official certifiers. Many unfounded accusations have been made, suggesting that certification bodies have business relations with the relevant companies and thus the test results are biased. Education of the public and the media on the certification process by “accredited� testing houses is clearly lacking.

Many national product standards, which are frequently mentioned on both sides of the public and corporate fence, were created quite long ago. While companies are experiencing innovations in production processes and new materials, the pace at which standards are updated seems to be too slow to keep up with such continuous developments. There is an urgent need for an impartial development mechanism to be formed for the production, m od if ic at io n an d up da ti ng o f p r o d u c t s t a n d a r d s . H o w e v e r, suspicions that certain major companies are hijacking national standards can be heard from time to time. We can still remember the doubt over whether the new standards for dairy products were drafted by a few dairy manufacturing giants. This makes it even harder for the public to determine who to trust. A clear answer on how to guarantee minimal product safety needs to be provided, offering governmental supervision bureaus a wider space to play their key roles. W h e n s a f e t y i n c i d e n t s o c c u r, consumers’ primary concerns are to seek the channels through which they can obtain help, identify which organisations they can trust, and demand when the truth will be clarified. In a virtually connected society in which information spreads

fast, questions that are not answered quickly and convincingly can affect the reputation of stakeholders by disrespecting the general public's right to be properly informed. How to develop consumers' active awareness of safety, shape companies' sense of responsibility for their products, and establish the authority of supervisory organisations are practical problems that need to be settled immediately. We may be able to learn from cases of product safety supervision in mature developed countries. First, we need to establish a solid system of product recall. In daily life, the products that are most frequently recalled are internationally renowned car brands or IT products. The companies concerned actively apply for recalls due to quality problems or safety problems and provide free repairs or replacements for consumers. How many proactive product recall cases feature domestic brands? Why is it difficult to give an immediate answer here? Is the quality of international brands not as good as that of domestic products? Does China still not have a system for product recall in place, and if not, why not? Is it that local companies lack a sense of responsibility or that the cost of liability for accidents is too low? The answer tells its tale.

Second, in countries where people have a mature awareness of safety, consumers themselves will ensure that products carry the certification marks of authoritative certification bodies before purchasing them. These bodies enjoy strong reputations, and people are familiar with them. Furthermore, the manufacturers are also willing to place the awarded safety marks on their products to give consumers confidence. If major incidents occur due to safety problems with the product, the associated certification bodies must undertake joint liability and may even face legal penalties. Turning to our local market, how do we fare regarding joint liability? To be frank, the relative systems in our country and the habits of our consumers are not yet matching the actual needs. However, this should not compromise our determination to construct "a country powerful in quality�. This year, the National


Bureau of Quality Inspection

As society pays more attention to

proposed the working principle of safety, facilitating development

honesty, quality and safety, the services of third party certification bodies that project trust are

and strengthening quality

increasingly in demand. Certification

"focusing on quality, guaranteeing

testing". In addition to the efforts of governmental organisations, manufacturers, third party testing bodies, standard-setting organisations and consumers also need to make the effort to realise the goal of "a country powerful in quality". As for manufacturers, brands cannot be built in a day. However, an image created through painstaking

and approval are employed for the first time in the "12th Five Year Plan", placing greater emphasis on the work of certifiers in the context of national economic and social development. As a member of the industry, TĂœV Rheinland advocates that every industrial organisation should improve self-discipline and help manufacturers to identify quality and safety standards in production, and thus ensure that products satisfy the safety and quality requirements

efforts could collapse overnight

of the target market. Products should

due to quality problems with just

also meet the needs of consumers

one product. No matter whether

and safeguard their health, reducing

companies are facing international

the risk of complaints and recalls

markets or focusing on local

once they enter the market. We can

development, we suggest that they

respond to manufacturers’ specific

aspire to the highest standards of

requirements with our tailor-made

product safety as a basic objective.

testing services, to ensure high-

quality products that will add value to their brands and ensure consumers' confidence. Meanwhile, as an active participant in setting international standards, we hope to bring our experience to China to help domestic organisations upgrade their national and industrial safety standards to provide a basis for evaluation. Last but not the least, we appeal to open up the domestic product safety testing market to break through the bottleneck of industrial development as quickly as possible, to improve the level of domestic product testing and keep pace with the development of new products. By shaping the organic and open consumption cycle, combined with manufacturers, standardsetting organisations, testing bodies and consumers, quality of life will be promoted and consumers will purchase with confidence. Finally, "made in China" will become a synonym of quality and liability.


Is Lean Meat Powder Acceptable?

Due to the recent opening up of beef imports from the United States, the term “lean meat powder� has become not only the focus of media attention, but also an issue of public concern.


Pigs and cattle are the main sources

lean meat powder is harmful to the

of human animal protein, and Dong-

human body, and the ingredients

po pork stew and beef noodles are

are mostly approved medications,

common dishes on Chinese dining

the drugs are, after all, not “food”,

tables. Due to the recent opening

and the security issue must not be

up of beef imports from the United


States, the term “lean meat powder” has become not only the focus of

Ta i w a n h a s n o t a p p r o v e d t h e

media attention, but also an issue

use of lean meat powder and

of public concern. According to

the health standard is still set as

the current media reports and press

“Detection not allowed”. Although

releases from the Food and Drug

commercially available simple

Administration and the Department

test reagents can facilitate testing,

of Health, the policy of the Executive

businesses must keep in mind that

Yuan is based on the principle of

the test results may not conform

being “within safe limits, cattle and

to the “Detection not allowed”

pig separation, mandatory labeling,

health standard, due to the limited

and excluding offal.” Hence, safety

capacity and sensitivity of the tests.

is still a wide concern, especially for the general public who want nothing

TÜV Rheinland Aimex has long

endorsement of professional testing.

more than to be able to select and

been concerned about food safety

Duff Rheinland has always insisted

enjoy high quality meat without

in Taiwan, and the company was

on food safety and our guaranteed

concerns over its safety.

the first to implement a lean meat

accurate testing ser vice is the

powder testing service. The “Test

best way of monitoring quality.

of full lean meat powder found

Regardless of whether or not lean

in meat products” programme

meat powder is opened up for use,

has recently been launched to

we will continue to uphold the

simultaneously analyse eight of

principles of precision and integrity,

the products in lean meat powder,

safeguarding consumers, and

including ractopamine (i.e.,

assisting operators in confirming

paylean), clenbuterol, salbtamol

the quality of goods, thereby

and so on, to assist the market in

ensuring that the general public

testing all meat items and track

can purchase meat items safely,

suppliers’ imported meat quality.

and maintaining the reputation

“Lean meat powder” is actually the common name of an agonist; its scientific name is “sympathomimietic stimulant ( β -agonist)”. Pharmaceutically, it is classified under the “adrenal beta-receptor agonists”, which include various drugs such as clenbuterol, ractopamine, salbtamol and terbutaline. Adding lean meat powder aids protein synthesis, reduces the number of feeding days and increases production efficiency. Although no medical research has indicated that the consumption of

of businesses and the rights of The establishment of a positive food reputation requires the




Recycled Material Verification Service and Introduction to a Trend


Yet it has become harder to ignore what we throw away. The advent of the information age has brought with it new products that are released onto the market in quick succession. Consumers buy them just as quickly, and discard ‘old’ products that contain enclosures, castings and electrical components made of materials that are difficult to classify and recycle. Fortunately, changes in government policies, the creation of recycling systems and increased public awareness have meant that electronic waste is now recycled and reused more often. There is now a relatively sustainable supply chain of recycled materials. In addition, the concepts behind the management of electronics disposal have expanded from the early Extended Producer Responsibility (EPR) and Waste Electrical and Electronic

Equipment (WEEE) ) -Directives, to today's internationally recognized voluntary regulations on recycled materials such as Sweden’s TCO eco-label, Germany’s Blue Angel eco-label, America’s Electronic Product Environment Assessment To o l ( E P E A T ) a n d Ta i w a n ’ s Environmental Label. These voluntary regulations require manufacturers, particularly monitor and laptop manufacturers, to use a certain percentage of recycled materials in plastic parts to meet the goal of eco-design and promote mandatory resource recycling. Among these regulations, TCO Edge has the strictest requirements for monitor products; which is a minimum of 65% recycled materials, all of which must be post-consumer plastics. With the rise of environmental consciousness and increased social-ecological responsibility taken by corporations, manufacturers are increasingly using recycled materials in their products, which not only ensures that they fulfill their

corporate social responsibility (CSR) but also influences their partners in the green supply chain. Because a recycling system has been established and recycling technology is becoming more mature, the use of recycled resources will continue and be extended to areas other than information products. The planet’s resources are limited. If materials from consumer products can be recycled and reused, we will not only reduce the discarding of unused materials but will also promote resource recovery, fulfilling humankind’ s responsibility for a sustainable environment. The TÜV Rheinland Group has been engaging in environmental affairs for many years. By interviewing personnel, performing audits on statistics and documentation, conducting on-site checks and verifying workers’ skills and abilities, the TÜV Rheinland Group ensures the use of recycled materials and issues certificate of compliance that indicates the increased use of recycled materials in production, and thus value added products.



CSR Pacing from Organizational Innovation to Product / Service Innovation

– Sharing, Cooperation, Win-win


Wi t h t h e f r a m e w o r k reformation of TÜV Rheinland Greater China from Regional Management to Product Line Management, CSR Business Unit (CSR BU) established on 1st June 2010. Being social responsible is increasingly important for modern enterprises. As such, understanding the wider impact of social responsibility can help us develop new products and services. For the last two years, our CSR BU expanded from few resource members to 50 experienced and professional auditors covered from south China to middle and north China. In 2011, our business has achieved 120% increase. In addition, apart from existing SA8000/BSCI/EICC certification accreditation, we have also achieved:

Sedex (SMETA) Accreditation: We h a v e p r o v i d e d s o c i a l responsibility a u d i t s e r v i c e t o large British retailers TESCO and Mothercare in adherence to SMETA standards. In addition, we have also provided audit services to a number of fast consuming goods brands, such as: Kraft and Unilever.

AA1000 (GRI Report & CSR Report Verification) qualification A key challenge facing business is the need for more reliable indicators of progress in the field of CSR, along with the dissemination

of CSR strategies. In 2012, we have provided CSR inspection report to leading brand Huawei Investment Holdings Ltd.. We are deeply aware of the wide use of CSR report by national and international wellknown enterprises as part of their business strategic development plan.

ICTI Accreditation: On 1 January 2012, we have obtained the Accreditation for ICTI Care Foundation. We are the only authorized third party certification body in recent years. This represents a high recognition on TÜV Rheinland fair objective brand image, and is a high recognition on our team spirit, work attitude and performance.

performance through relevant training and assessment service. Our CSR BU has established a sound communication and cooperation relationship with well-known industry enterprises, for instance: The International Federation of Inspection Agencies (IFIA), Business for Social Responsibility (BSR), Golden Bee China Enterprise Social Responsibility Council, and Guangdong Academy of Social Sciences. In 2012, we will focus on North American market, till now, we have involved in the business with several well-known buyers. Meanwhile, we also step up the development of domestic

ICS Accreditation:

market, working with the world’

With a continuous unremitting effort, we have obtained ICS accreditation and gained the business partnership with one of its key members--Carrefour.

s biggest B2B platform on business

ISO26000 Assessment Service:

With the highly recommended

ISO26000 is the latest social responsibility guidance in the market and is intended to assist organizations in contributing to sustainable development. Organizations around the world, and their stakeholders, are becoming increasingly aware of the need for and benefits of socially responsible behavior. Based on the guidance, we can promote common understanding in the field of social responsibility; enhance complement of social responsibility and sustainable development

information credibility provision to its high-end suppliers. And thus, it helps suppliers and B2B platform to enhance brand image.

support from management, in the future, CSR BU is facing challenges and risks “How to achieve more efficient cross regional, cross product line cooperation and resource allocation to integrate various resources and service, and become a reliable one-stop leading provider of product testing, product inspection, and system certification services & solutions in Greater China, contributing towards the sustainable development of society.”




AMICCOM A7153 Chip Tested by TÜV Rheinland Granted RF4CE Certificate by ZigBee Alliance

The AMICCOM A7153 chip has

standards, the ZigBee

Receiving certification from

passed compliance testing at TÜV

Alliance has developed

the ZigBee Alliance for

Rheinland and granted an RF4CE

the technology around

RF4CE is not only affirmation

certificate by ZigBee Alliance on

additional standards

February 2012. The platform is

for upper layer protocols and

specifications but also a solid

called BEERU (ZigBee Radio Unit).

applications. It has also established

foundation for end products in

of compliance with technical

testing criteria, validation and

the market. A large number of

ZigBee is a wireless networking

trademark requirements to achieve

semiconductor manufacturers,

technology developed and

compatible solutions.

wireless IP providers, OEM

administrated by the ZigBee

manufacturer and end users support

Alliance. It can be applied in a wide

In 2011, AMICCOM introduced

the ZigBee Alliance. More than

range of products covering the

the A7153 2.4GHz RF transceiver

300 leading companies around

consumer, business, industry, and

chip, which supports the ZigBee

the world contribute to ZigBee

government organization. It offers

PHY layer and MAC layer, and

specifications and solutions.

end users unlimited flexibility

is aimed at the wireless sensor

and mobility and bring wireless

network (WSN) and smart remote

The TÜV Rheinland Group has

intelligence and capabilities

control markets. In the same year,

been formally appointed by the

into daily necessities. It offers

AMICCOM joined the ZigBee

ZigBee Alliance as a ZigBee testing

enterprise optimization and

Alliance and submitted the A7153

laboratory. TÜV Rheinland joins

the standardization of wireless

to TÜV Rheinland for RF4CE

ZigBee alliance and actively

approval. The ZigBee platform

contributes to development

BEERU complies with the

of specifications and ZigBee

applications with the

RF4CE standard under all

testing methods. It also provides

advantage of simplicity,

test conditions and can

verification testing for ZigBee

reliability, low cost and

communicate with the


low power. Based on open

RF4CE golden platform.

platforms in the fields of remote monitoring and control



TÜV Rheinland's Ergonomics Laboratories now conduct testing in accordance with the latest TCO Certified Displays 6.0 specification. TCO Certified Displays 6.0 is the newest generation of the TCO Certified Displays standard. TCO Certified Displays is one of the world's most popular certification marks for displays. On November 7, 2011 TCO released the draft version of the latest standard, TCO Certified Displays 6.0, which when finalized will replace the current version, TCO Certified Displays 5.2. TÜV Rheinland has the largest number of TCO-accredited laboratories, which are distributed close to manufacturers and/or major markets. Continually providing the leading testing t e c h n i q u e s a n d a d a p t a b i l i t y,

TÜV Rheinland supplies stateof-the-art TCO testing and application services to top manufacturers and brand owners -- not only for displays, but also for notebooks, computers, headsets, and projectors. With over a decade of cooperation with TCO, TÜV Rheinland's Ergonomics Laboratories have better understanding of the TCO standards and their trend of development. The latest version has stricter requirements in regard to luminance uniformity, luminance contrast, chromaticity, grayscale linearity, workload ergonomics,

and ecology. With our industryleading expertise in display testing and debugging, we provide the most efficient support to the applicant, reducing lead time and cost. The energy-consumption testing in accordance with the EPA standard series has also been incorporated within TCO Certified Displays requirements. TÜV Rheinland provides energy-saving services through its available EPA-accepted laboratories and certification bodies. The one-stop services thus provided bring tremendous advantage for clients, enabling access to expansive markets for their products.


IT manufacturers in the world had witnessed a big movement in 2010. Manufacturers like HP, DELL, Intel, Foxconn, Quanta, Acer, Wistron and Asus moved their factories from coast to west areas. 67% iPad of the world will be made by Chengdu and 33% notebook computer of the world will be made by Chongqing after two years.

Chongqing a key City in Western China

The output of notebook computer in the beginning of this year is good. It’s around 2.77 million pieces in January and it’s 5.6 times of last January. The output of notebook computer made in Chongqing will reach 50 million pieces in this year and relevant component suppliers (around 600) will locate in Chongqing accordingly. By the way, Chongqing is working to be the most biggest base in Asia for Cloud Computing within 3 years. That can increase the requests and output of relevant equipment and display devices.

Other than IT industry, worldwide famous companies for logistic, finance, chemical, mobile, consumer and medical industries are setting up in west areas. The Economic Cooperation Framework Agreement was signed in Chongqing and it attracted many Taiwanese manufacturers. Under the background, the Forbes magazine predicted Chengdu and Chongqing will be the most developed cities in the world for coming 10 years. TÜV Rheinland had set branch offices both in Chongqing and Chengdu that we can provide local service to manufacturers in west areas.



動態與服務︱ Featured Service

Electric Vehicles: an Anticipated Hit in China The TÜV Rheinland Global Electric-Vehicle (EV) Survey which was released earlier, suggests that a majority of car owners in India and China would choose to purchase an EV in the next five years.



his report draws findings from a poll of 6,421 people, conducted by our vehicle testing specialists in 12 main markets including China, Germany, Japan and the USA. From this sample, a total of 502 adult drivers in China were surveyed. The respondents owned a representative variety of cars varying in size, brand and category. The survey shows that although the problem of charging is the biggest concern for Chinese drivers, most people are still willing to invest more for the sake of environmental protection. In addition, Japan and Germany are perceived as the leaders in EV technology and thus customers would prefer to buy Japanese and German EVs. Potential EV buyers selected Volkswagen as their preferred brand.

The survey confirmed that Chinese drivers commute mainly in cities and most driving is short- or mid-distance. When asked if they would purchase an EV in the coming five years, approximately 88% of the Chinese respondents said that they would, trail just behind India with 92%. The poll finds that 44% of respondents would use an EV in the same way as their present car, while 39% would prefer to use the EV only for regular trips. Over 60% of driving journeys are in cities and 87% of those surveyed drive less than 100km in their daily lives, with journey times of less than 2 hours. The study shows that families with a higher income drive longer hours and distances than those with lower incomes. The report found that most of the Chinese respondents drive fewer than 100 miles per day. This makes driving an EV viable because the battery needs to re-charge after a certain distance and this is likely to be satisfied. Thus, Chinese people are more willing to buy an EV than others.



動態與服務︱ Featured Service


Environmental Benefits of EVs are high on Chinese respondents’ minds.

Access to charging points and battery safety are the greatest concerns.

In China, 40% of those interviewed said that they would like to buy an EV because of environment protection. Saving fuel (19%) tops the list of environmental concerns; including combating global warming, air pollution, protecting our future from environmental changes and environmental protection through reduced oil exploration. The cost is also relevant; for example, the rising fuel price weighs quite heavily with 32% of respondents. To this end, 16% may choose an EV to save money on fuel. The purchase price, governmental subsidy and tax credits can also assist in the adoption of electric vehicles.

Data shows that charging options, convenience and accessibility will be critical to EV adoption. People worry about the need to recharge the battery after a certain distance (22%), the availability of charging stations (19%), the number of hours required to charge the battery (9%) and loss of power while driving (4%). However, 9% of the respondents would not buy an EV due to safety considerations. Of these, 50% of them are very concerned about battery leakage/explosion (17%), battery safety (17%) and loss of power in the street (16%).

More than four out of five (80%) are willing to pay more to buy an EV to support environmental protection. 38% of the respondents claimed that they would prefer an EV to a regular vehicle even if the price of the EV was 20% higher. The study finds that those with a higher household income are more likely to value environmental protection, with 63% wanting to buy an EV, which is 11-12% higher than those with a lower income. One in four of the low-income respondents said that they were discouraged by the cost of environmental protection.

From the Chinese perspective, Japan and Germany are perceived as the leaders in EV technology. The specialists from TÜV Rheinland Group found that when asked which country was the most technologically advanced with regard to EV technology, more than half of the respondents perceived Japan (50%) and Germany (49%) as the leaders, followed by the USA (33%) and China (31%).

This result shows that Chinese drivers will choose Japanese or German brands because they believe these lead in vehicle technology. The survey also reveals that people’ s first car buying experience has a direct impact on their next purchase. Volkswagen was selected as the best choice for an electric vehicle for its brand reputation and not for a specific product. In fact, the German automaker so for does not sell EVs in China. As environmental and energy efficiency concerns spread throughout China, electric vehicles (EV) are increasingly seen as a solution for modern transportation. As they grow ever more popular, EVs will have a profound and positive impact on energy applications, transportation and society. EVs growing popularity will also create tremendous opportunities for charging systems and other EV-related products. TÜV Rheinland is an internationally renowned third-party inspection and certification organization, our team of experts foresees the growth of this new market, being the first in China to launch testing and certification services for EV charging systems. Our service scope includes: EV charging stations, EV cables, EV charging couplers and EV on-board battery chargers. TÜV Rheinland can help charging station owners, EV manufacturers, and component suppliers demonstrate the superior quality and safety of their products and equipment.




Going up: Lift and Elevator Energy EfďŹ ciency VeriďŹ cation The latest studies show that the energy consumption of buildings accounts for 40% of global energy consumption. As the number of buildings increases, so does the amount of energy consumed. A lift, a crucial component of any modern building, consumes on average 3%-8% of all energy. There is then great potential to improve to increase energy efficiency by simply tuning the way they operate. As various countries pay more attention to environmental issues, more policies restricting emissions and focusing on energy saving will be introduced. More lift manufacturers and users are putting lift energy efficiency and relevant assessment on their agendas. Many countries have also started to research and prepare relevant standards and regulations on lift energy efficiency.

At present, VDI 4707 Part 1 of the Association of German Engineers is commonly used for the assessment of lift energy efficiency around the world. This standard was issued in March 2009, after the comprehensive testing and assessment of 33 lifts from eight major lift manufacturers in Europe by the Swiss Agency for Energy Efficiency in 2005. The standard is applicable for the energy efficiency assessment and classification of new passenger lifts and cargo lifts as well as existing lifts. There are seven classes of lift energy efficiency based on the energy required for operation and standby, indicated by seven coloured labels from A to G, among which Class A represents optimal energy efficiency and Class G means that lift energy efficiency needs to be improved urgently.



動態與服務︱ Featured Service


There are six steps for the energy efficiency testing as per VDI 4707 Part 1 in total. First, determine the category of the lift to be tested (Category 1-5), which is related to the type of building, the purpose of the lift and the frequency of use. Operational data from the lift manufacturer and actual operational data in use can be used to accomplish a comprehensive assessment. One critical factor in the assessment of lift energy efficiency is that each category has specific daily mean operation and standby hours, which form the basis of the calculations. Next, the actual energy consumption in operation and standby is tested. In this process, the standby energy consumption is determined 5 minutes after the last operation, and the operational energy

consumption is the average of the results over three tests. The required parameters are obtained once the relevant calculations are completed based on the above data. The lift energy efficiency can then be determined, and the certificate issued by the authoritative organization. It should be noted that the test based on VDI 4707 Part 1 only indicates the energy efficiency of a single lift. Lifts of the same model and configuration might have different energy efficiency levels due to differences in installation and frequency of use, in which case a separate test is required to issue the certificate. TÜV Rheinland began testing and certifying lift energy efficiency in Asia in 2008. The lifts it has tested are used in landmark buildings,

international commercial buildings and high-end residential buildings. So far, TÜV Rheinland has issued more than 50 lift energy efficiency certificates. The industrial service unit of TÜV Rheinland has also established a database of local lift energy efficiency attributes in Greater China. It has rich experience in testing lift energy efficiency. TÜV Rheinland provides lift energy efficiency tests, along with proposed improvement plans based on the test results. In one case concerning a test of a 14-storey residential building lift, TÜV experts graded its category of use at Class 2. The test results showed Class D standby energy needs, Class B operational energy needs and an overall energy efficiency of Class C. After careful analysis, engineers proposed a solution to improve the lift’s energy efficiency. Re-testing showed Class B standby energy needs with 67% energy saved, the same Class B operational energy needs but with 10% energy saved and an overall Class B energy efficiency with 48% energy saved. Energy consumption after the improvement was 52% lower to previous level. Along with this gain, the CO 2 footprint was reduced. If similar improvements are made across vast cities, the benefits in terms of emissions and cost are considerable. Currently, VDI 4707 Part 1 is not mandatory, but it is possible that it will become compulsory in the future. TÜV Rheinland recommends that lift manufacturers and building owners who are unfamiliar with VDI 4707 should learn more about this standard. Our team is here to discuss relevant technical issues together with you. We are confident we can help to reduce lift energy consumption and emissions as well as cutting your costs.



動態與服務︱ Featured Service

Auman GTL B

1st Chinese EN


Became the

N Heavy Truck

The global launch of the Auman GTL, the first Chinese EN heavy truck, was celebrated in the mid of February. TÜV Rheinland safety certificate for the Auman GTL was presented on the same day. The certificate represents the highest global safety standard for heavy trucks.

The Auman GTL has passed TÜV Rheinland’s stringent tests, conducted at the Ministry of Communications testing site in Tongzhou, Beijing in November 2011. Commenting on this success, head of Mobility, TÜV Rheinland Greater China said that: “we have tested the Auman GTL by a complete set of European safety standard testing and certification tests based on EC directives and EEC regulations and standards. The Auman GTL passed all of

these tests, confirming that the truck compliances with the same technological and safety levels as equivalent European models.”

30° hill-start and hill-holding test, the 30° down-hill and hill-holding test, the routine braking test, the ABS combinational road condition test, the operation stability test and the highway and ring road tests, thus demonstrating the reliability, durability and safety of the vehicle’s components and systems. With the full trust and support of customers, the Auman GTL is expected to bring something special to the competitive commercial vehicle market.

Featuring high quality, safety, fuel efficiency, comfort and intelligence, the Auman GTL stands out as the first domestic truck to satisfy stringent European standards. Its active and passive safety systems conform to the most rigid European regulations and standards. The Auman GTL outperformed in the

TÜV Rheinland is renowned independent testing and certification expert by offering rigorous, high-quality testing and certification services from a fair and independent perspective. Its E-mark certificate for vehicles meets widelyrecognized standards approved by the EU.




TÜV Rheinland Greater China issued the ISO14067 certificate to CNPV Solar Power SA (CNPV) on February 2012, in Dongying, Shandong Province. The CNPV solar module carbon footprint project is the first ISO14067 certificate to be issued in the photovoltaic industry by TÜV Rheinland Greater China, confirming that CNPV is one of the leading companies in environmental control and natural resources area.

CNPV believes that the ISO14067

In presenting the certificate to

certificate represents a credible

CNVP, Yushun Wong, Director

honor, and the verification by TÜV

of Systems of TÜV Rheinland

Rheinland further strengthens the

Greater China, commented that

authority of the certificate. "By

“TÜV Rheinland will continue to

promoting and demonstrating

support CNPV’s carbon footprint

the true value of our innovative

project, particularly the CSR

products, we are supporting green

programme. TÜV Rheinland adopts

energy conversion," said Mr. B.

a rigorous verification process

Ve e r r a j u C h a u d a r y, t h e C O O

to help companies to improve

a n d C T O o f C N P V.


their processes, to reduce carbon

our continuous efforts to reduce

emissions and to increase energy

environmental impact, we are

efficiency. With the professional

aiming to further reduce carbon

services of TÜV Rheinland,

consumption in the process of

enterprises can continue to improve

product recovery and to develop

their professional skills and

products with higher conversion

achieve the target of sustainable


development. “



動態與服務︱ Featured Service


开关目击试验室证书 The First Switch Witness

Laboratory Certificate of 2012 was Issued






张证书,并且努力提高试验室数据的 准确性,做强、做大试验室。” 德








品安全和质量的充分认可,以及对双 方试验室合作的充分信任,客户同时










TÜV Rheinland Greater China issued its first Switch Witness Laboratory Certificate in the early of February to Zhejiang Zhongxun Electronics Co Ltd. The Zhejiang Zhongxun Electronics laboratory, established in 2000, implement the ISO 17025 system in 2007, passed the CNAS laboratory accreditation in the same year and the TÜV Rheinland Shanghai UA examination in 2009. The Switch Witness Laboratory Certificate will enable Zhejiang Zhongxun Electronics to perform all of the laboratory tests required by TÜV Rheinland, which will accept the data and award TÜV and CE certificates to the company within a week of the test. The test data will also be used for awarding international certificates such as Russia’ s GOST certificate, Argentina’ s S certificate, Australia’ s ITACS, and North America’ s cTUVus certificate.

Zheng Jianzhong, General

switch products produced by

Manager of Zhejiang Zhongxun

Zhejiang Zhongxun Electronics

Electronics Co Ltd., remarked

and indicates our confidence in

that: “we will use this certificate

the cooperation between the two

consistently as we endeavor

parties. In addition, customers

to improve our laboratory

can experience the freedom of

data accuracy and make our

our one-stop services available

laboratory bigger and stronger”.

worldwide through cooperation

Xia Bo, General Manager of

with TÜV Rheinland. We hope

TÜV Rheinland Greater China’s

to build and maintain long

Component Product Line, said

partnerships rather than

that: “this certificate shows that

simply doing business with

TÜV Rheinland fully recognises

our customers.”

the safety and quality of the



動態與服務︱ Featured Service

西安高压电器研究院 获得CBTL证书 XIHARI Awarded CBTL Certificate 德国莱茵TÜV和西安高压电器研究院于2011年中期签署 战略合作协议,双方将携手为高压电器产品提供优质的检测 和认证服务。2012年2月21日西安高压电器研究院(以下简 称:西高院)顺利通过国际电工安全认证体系(IECEE)的 审核,并被授予了CBTL证书。 TÜV Rheinland and the Xi’ an Highvoltage Apparatus Research Institute (XIHARI) signed a strategic cooperation agreement in mid-2011 to provide joint testing and certification services for high voltage electrical apparatuses. On 21 February 2012, XIHARI successfully passed the Worldwide System for Conformity Testing and Certification of Electrical Equipment and Components (IECEE) certification requirements and was awarded a CBTL Certificate.



With IECEE certification, XIHARI can perform tests


according to IECEE and IEC standards and issue a CB


report, and TÜV Rheinland will then issue a CB certificate.


The report and the certificate are accepted and approved by


53 countries and regions under IECEE.

的53个国家和地区接受和认可。 XIHARI now has three national-level product quality 西高院现挂靠有3个国家级产品质检中心,

inspection centres – the China National High Voltage


Apparatus Quality Supervision and Inspection Test


Centre, the China National Insulator and Surge Arrestor


Quality Supervision and Inspection Test Centre and the


China National Power Capacitor Quality Supervision and


Inspection Test Centre – and a National Measurement


Mutual Inductor Type Test and Assessment Laboratory.


The China National Accreditation Service for Conformity


Assessment has authorised XIHARI to inspect 69 types


of products in 7 categories, including high voltage electrical apparatuses, transformers, DC converter valves, insulators, arrestors, power capacitors and static reactive compensators.



技術專題︱Technical Expertise

Advanced- Level

Product Material Identification About this test ●

Py-GC/MS is an analytical tool able to thermally crack non-volatile or insoluble or high molecular weight compounds (e.g. polymeric materials) into fragments suitable for chromatographic analysis. The polymer can be identified via the interpretation of the characteristic fragments.

Identify the minor polymeric component (e.g ~ 5% PVC in PES) in a polymer blend (mixed polymer), a thin coated polymer on the fabric and polymer with a large amount of inorganic additives.

Identify counterfeits materials

Monitor the quality of materials

Proof the identity of the materials

Check the composition of materials, quantitative analysis of the major components in plastic and fabric (to be launched soon)

This new service offers the identification of unknown materials in plastic or fabric. Our chemical laboratory is amongst a few commercial lab to adopt the new hybrid technique called Pyrolysis – gas/chromatography (Py-GC/MS) which is a technique commonly used in many governments' forensic laboratory, but not in commercial laboratories.


This new service meets the needs of increasing concern on harmful Organophosphorus Compounds in products. This harmful chemical is commonly used as flame retardants in plastic and textiles. World Health Organization has found it to be toxic and cause skin irritation to humans.

New Testing Service

Harmful Organophosphorus Compounds (OPC) in Plastic Products Organophosphorus compounds are commonly utilized as flame retardants in plastic and textiles. Materials in which OPC are used as flame retardants include, amongst others, polyvinylchloride (PVC), polyurethane foam (PU), thermoset resins, textiles, cellulosics and polyesters (PES). As plasticizers, they are utilized in materials like PVC, cellulose acetate, PES, acrylonitrile-butadiene-styrene (ABS) and synthetic rubber. Apart from their major usage, they are also used as stabilizers, anti-foaming, solvent and wetting agent.



技術專題︱Technical Expertise


N 61010-1




技術專題︱Technical Expertise

For equipment incorporates testing and measuring circuits, IEC/61010-2-030:2010 shall be used in conjunction with the IEC/ EN 61010-1:2010. These testing and measuring circuits may, for example: ●

measure voltages in circuits of other equipment measure temperature of a separate device via a thermocouple inject a voltage onto a circuit to analyze a new design

They are often found in but not limited to, for example: ● ● ● ● ● ● ●

Multi-meter, Oscilloscope, Temperature recorder, Hi-pot tester, Impulse tester, Grounding tester, Leakage tester


What services we can offer? TÜV Rheinland are capable of offering testing and certification services according to the new standard which includes requirements of following country/region: CB scheme: IEC 61010-1:2010, IEC 61010-2-030:2010 German GS mark: DIN EN 61010-1:2011, DIN EN 61010-2-030:2011 Europe CE marking: EN 61010-1:2010, EN 61010-2-030:2010 ●

● ●

We recommend you to update existing certificates as early as possible to meet the latest requirements. “One set of samples with a one-stop test for global sales" is the customized service offered by TÜV Rheinland. This service allows manufacturers to obtain all of the certification marks they need, including the CB, CE, GS, TÜV and cTUVus marks, amongst others. This service minimizes certification costs and lays a solid foundation for future market expansion. If you need more information about the requirements, our seminar, or would like to apply standard update, please feel free to contact our branch offices nearby.

In addition to the requirements removed from IEC/EN 61010-1:2001, the following major requirements have been added to IEC/61010-2-030:2010. Numerous other changes have also been made. ●

The terminology for MEASUREMENT CATEGORY I has changed. It is termed “not rated for measurements within MEASUREMENT CATEGORIES II, III, or IV”. CLEARANCES and CREEPAGE DISTANCES have been added for unmated measuring circuit TERMINALS. Requirements have been added for specialized measuring circuit TERMINALS. Requirements for TRANSIENT OVERVOLTAGE limiting devices have been revised.

Requirements have been revised and added pertaining to REASONABLY FORESEEABLE MISUSE of measuring c i rc u i t s , i n c l u d i n g disconnection of the protective earth and usage of the equipment in a manner that might cause arc flash. Insulation requirements for measuring circuits have been primarily located in Annex K. Annex AA has been added to describe the characteristics of MEASUREMENT CATEGORIES. Annex BB has been added to describe hazards that may be encountered when using measuring circuits.



Mori Seiki was Issued Certificate for Radiation Monitoring and Control Process

One of the major Japanese machine tool manufacturers - Mori Seiki Co., Ltd. - is now certified by TÜV Rheinland for the Radiation Monitoring and Control process established at five locations in Japan. First introduced a few months after Fukushima accident, TÜV Rheinland’s new certification scheme was used by several Japanese manufacturers in industries varying from automotive to medical products and equipment. TÜV Rheinland has been active in the field of nuclear engineering and radiation protection for decades. TÜV Rheinland operates fully equipped nuclear labs, uses highly accurate equipment and measures radiation levels according to international and domestic safety standards.

TÜV Rheinland Acquires Korean Specialist Service Provider for Nuclear Technology

TÜV Rheinland has acquired L4S Engineering, a nuclear engineering service provider. The company is specialized in radioactive waste management, radiation protection, environmental impact analysis, safety analysis – serving customers all over the world. With this acquisition, TÜV Rheinland is able to deliver comprehensive nuclear services to all locations around the world. Great synergy effects can be expected with our core competence centre in Germany in order to expand our business worldwide. TÜV Rheinland has been represented in Korea with its own company since 1987. The most important services include testing of wireless telecommunication products, photovoltaics, electrical household appliances and entertainment electronics as well as the homologation of vehicles




Vodafone Receives Certificate for Its Business Continuity Management

Whether by hacker attack, technical failure or employee error, no company can afford the breakdown of critical business processes. For this reason, Vodafone invested in its business continuity management and has been certified by Cert in accordance with ISO 25999. As Vodafone also maintains the necessary infrastructure for its customers, it is all the more important that the company can fall back on safety measures and emergency strategies. This was TÜV Rheinland’s first customer certification in this area. “We already have the appropriate knowledge due to our certification of security management systems in accordance with ISO 27001. So auditing business continuity management according to ISO 25999 is only a small step for us,” explained Ralph Freude from TÜV Rheinland Cert GmbH.

Wo r k o n t h e n e w B e r l i n Brandenburg Airport is entering a critical phase. The eightmember team of experts from TÜV Rheinland has begun with

TÜV Rheinland’s Expert Team Starts Technical Acceptance for New Berlin Brandenburg Airport

the technical acceptance process for the terminal and other airport

“This is the start of the crucial phase before going into operation”, said

buildings. From now on, the TÜV

Dr Körtgen, Managing Director of Berlin Airports, “The TÜV inspection is

Rheinland experts are working on-

putting the Berlin Brandenburg Airport through its paces. Along with trial

site to inspect, for example, the

operations, training and relocation planning, this is an important part

fire-safety equipment and other

of ensuring optimal performance in all processes relevant to the airport's

emergency systems.

operation before it is opened.”


企業社會責任︱Social Responsibility

HK Staff Joined Standard Chartered HK Marathon

Over 40 marathon lovers in HK office joined the Standard Chartered


Marathon 2012 on February 5. They took part in various events - 10km, 21km (half marathon) and the full 42km marathon. The race is much more than an opportunity for our team to compete for excellence. Through the training, they have motivated their spirit to meet the challenge for the race and the business in 2012.

Sichuan Teacher Training: 1st Module Completed On February 11 th, the first group of TÜV Rheinland 2012 volunteers

TÜV Rheinland volunteers, teachers

departed to Renjia Central School together with ICA facilitators and

and ICA facilitators interacted

delegation from Sowers Action. More than 30 teachers working for Renjia

closely and made the training

School participated in the training.

successful. After the training was successfully finished, volunteers

The training programme consists of 3 modules: teaching methodology,

and ICA staffs will follow up by

design and practice. The first two-day training focused on teaching

interviewing the teachers to get

methodology. ICA facilitators presented how to guide students and control

their feedbacks for improving the

emotions. They taught the teachers how to build up multi-intelligence in

training plan for the upcoming 2

teaching through workshops and games.



Successful TreePlanting Activity in Qingdao On March 9th, around 20 colleagues from TÜV Rheinland Greater China Qingdao office participated in the tree-planting activity initiated by the Youth League Committee. Most of our colleagues did not have experiences of planting trees before. However, it is not as difficult as they imagined. As motivated by the spirit of team working, they divided into small groups and helped each other to plant trees. After TÜV Rheinland volunteers’ hard work, 20 trees were planted on the barren hill in Laoshan District. With the professional caring by the local gardening department, the trees will grow up healthily and cover the hill all over with green.

Voluntary First Aid Training with Red Cross

2 1 c o l l e a g u e s f r o m Ta i c h u n g

trauma, fracture handling, CPR

They all had good interaction

Office participated in their free

(Cardiopulmonary Resuscitation),

with the trainers and received very

time in the voluntary First Aid

AED (Automatic External

useful knowledge to save people's

Training conducted by Red Cross

Defibrillator) as well as choking

life. At the end of the training, all

Association in Taichung Office


participants took a practical exam

on February 11th. The basic first

and a theoretical written test. All of

aid training took 8 hours and the

During the training all participants

the colleagues passed the exam/test

content included trauma handling,

practiced how to use triangular

and received a license.

stop of bleeding, dressing of

bandage and CPR in an emergency.



培训与咨询课程︱ Consultant and Training Schedule

培训与咨询 2012年6-8月课程计划

Training and Consulting 2012 Jun-Aug Schedule 以下所有课程,除在各地定期举办公开课外,均可根据顾客要求随时提供标准或客户化的企业内部培训,也可以为企业提 供相关的现场咨询项目等“一站式”解决方案,欢迎向各地办事处查询。 Besides regular public course in various locations, all the course can be customized as corporate internal training and “one-stop”solutions such as consulting projects.Welcome to contact us for further information.

培训服务——公开课 Training Services-Public course 质量技术 / 质量管理 Quality Technology / Quality Management 科目 Items

编号 No.

FMEA 应用能力提高

2012 / 08


广州 Guangzhou / 武汉 Wuhan

ISO 9000-S05


广州 Guangzhou

上海 Shanghai

北京 Beijing / 大连 Dalian



广州 Guangzhou

上海 Shanghai

北京 Beijing

广州 Guangzhou / 成都 Chengdu / 大连 Dalian / 上海 Shanghai / 长沙 Changsha

武汉 Wuhan

武汉 Wuhan

IRCA 国际认可质量管理体系主任审核员 IRCA Approved ISO 9001 Lead Auditor

FMEA 失效模式及其后果分析 FMEA: Failure Mode & Effect Analysis

2012 / 07 深圳 Shenzhen / 北京 Beijing / 重庆 Chongqing / 上海 Shanghai / 长沙 Changsha

ISO 9000-S03

新产品项目策划 (APQP)&生产批准过程 (PPAP) APQP: Advanced Product Quality Plan & PPAP : Production Parts Approval Process

2012 / 06

广州 Guangzhou / 大连 Dalian

ISO 9001质量管理体系内审员 ISO 9001 Internal Auditor

QS 五大工具应用能力提升 Enhancement of Application Skills of QS Five Tools

天数 Duration





北京 Beijing

广州 Guangzhou / 成都 Chengdu / 大连 Dalian / 上海 Shanghai / 长沙 Changsha



上海 Shanghai

北京 Beijing

大连 Dalian 大连 Dalian / 武汉 Wuhan

SPC 统计过程控制 Statistical Process Control - SPC



北京 Beijing

广州 Guangzhou / 成都 Chengdu / 大连 Dalian / 上海 Shanghai / 长沙 Changsha

SPC 应用能力提高班 SPC Application Skill Enhancement



上海 Shanghai

北京 Beijing

广州 Guangzhou

北京 Beijing

广州 Guangzhou / 成都 Chengdu / 大连 Dalian / 长沙 Changsha

武汉 Wuhan

北京 Beijing

大连 Dalian

上海 Shanghai

广州 Guangzhou / 北京 Beijing / 大连 Dalian / 上海 Shanghai / 长沙 Changsha 广州 Guangzhou / 武汉 Wuhan

MSA 测量系统分析 MSA: Measurement System Analysis MSA 应用能力提高 ISO/TS 16949 质量管理体系内审员 ISO/TS 16949 Internal Auditor







北京 Beijing / 重庆 Chongqing / 上海 Shanghai / 武汉 Wuhan

汽车工业过程审核 Process Audit at Automotive Industry



北京 Beijing / 成都 Chengdu / 大连 Dalian / 上海 Shanghai / 长沙 Changsha

汽车工业项目管理 Project Management at the Automotive Industry



上海 Shanghai


汽车工业产品审核 Product Audit at Automotive Industry


TL 9000 内审员 TL 9000 Internal Auditor



高级审核技巧/内审员技巧提升课程 Advanced Audit Skills/ Internal Auditor



广州 Guangzhou / 成都 Chengdu

上海 Shanghai

质量成本控制 Cost of Quality



重庆 Chongqing

大连 Dalian

用 QC 七工具解决问题 QC 7 Tools Implementation in Problem Solving



广州 Guangzhou

上海 Shanghai

QFD 质量功能展开 Quality Function Deployment



大连 Dalian

上海 Shanghai



广州 Guangzhou / 大连 Dalian / 上海 Shanghai

北京 Beijing

统计抽样检验技术实务 Statistical Sampling & Testing method



上海 Shanghai

8D 问题解决法 8D Problem Resolving



成都 Chengdu

上海 Shanghai




成都 Chengdu

上海 Shanghai 北京 Beijing

DOE 实验设计 Design of Experiments

上海 Shanghai

北京 Beijing / 成都 Chengdu / 大连Dalian


深圳 Shenzhen

TQM 全面质量管理



大连 Dalian / 上海 Shanghai

Poko Yoka 防错 Poko Yoka



上海 Shanghai




六个西格玛-绿带证书 6 Sigma-Green Belt Certificate



广州 Guangzhou / 北京 Beijing

广州 Guangzhou / 重庆 Chongqing 重庆 Chongqing

北京 Beijing

上海 Shanghai 长沙 Changsha / 武汉 Wuhan

成都 Chengdu

广州 Guangzhou

环境/职业健康与安全/综合/社会责任管理体系 Environment / ocupational Healthy & Safety / Comprehensive / Social Responsibility Management System 科目 Items

编号 No.

天数 Duration

2012 / 06

2012 / 07

ISO 14001 环境管理体系内审员 ISO 14000 Internal Auditor

ISO 14000-S03


成都 Chengdu / 上海 Shanghai

IRCA 国际注册 ISO 14001:2004主任审核员 IRCA Approved EMS ISO 140010 Lead Auditor

ISO 14000-S05


上海 Shanghai

大连 Dalian

OHSAS 18001 职业健康与安全管理体系内审员 OHSAS 18001 Internal Auditor



成都 Chengdu / 上海 Shanghai

北京 Beijing / 大连 Dalian / 上海 Shanghai

职业健康安全管理相关法律、法规培训 OHSAS 18000 Related Laws & Regulation



上海 Shanghai

企业职业健康安全管理体系中的危险源辨识、评价 和风险控制策划 Identification, Assessment and Risk Control of Dangers within OHS System



上海 Shanghai

成都 Chengdu / 大连 Dalian

环境与职业安全综合管理体系(ISO14001 & OHSAS18001)内审员 Integrated Management System(ISO 14001 & OHSAS 18001) Internal Auditor



广州 Guangzhou / 成都 Chengdu / 上海 Shanghai

上海 Shanghai

企业社会责任 - SA8000 管理体系内审员 SA8000 Internal Auditor



编号 No.

天数 Duration

供应商采购与谈判 Purchasing Negotiation and Skills



上海 Shanghai




大连 Dalian

供应商质量管理和绩效提升 Supplier Quality Management



北京 Beijing / 重庆 Chongqing / 大连 Dalian

北京 Beijing

广州 Guangzhou / 大连 Dalian

2012 / 08 广州 Guangzhou / 上海 Shanghai

上海 Shanghai

生产与物流 Production & Location 科目 Items

2012 / 06

2012 / 07

2012 / 08

北京 Beijing 上海 Shanghai 广州 Guangzhou

上海 Shanghai



培训与咨询课程︱ Consultant and Training Schedule




仓储管理 Warehouse Management

上海 Shanghai



准时制生产和看板系统 JIT Production and the Kanban System



物流及供应链管理 Logistics & Supply Chain Management









上海 Shanghai

大连 Dalian




上海 Shanghai

重庆 Chongqing / 北京 Beijing 大连 Dalian

精益生产精述 Lean Management



长沙 Changsha / 武汉 Wuhan

北京 Beijing

上海 Shanghai

精益生产系列之VSM价值流图分析 Lean Management Series - VSM (Value Stream Mapping)



上海 Shanghai

广州 Guangzhou

北京 Beijing

精益生产 - 5S现场持续改进与可视化管理



上海 Shanghai

广州 Guangzhou

精益生产 - 全面生产维护



重庆 Chongqing

上海 Shanghai




上海 Shanghai

北京 Beijing




上海 Shanghai

编号 No.

天数 Duration

解决问题与分析决策 Problem Solving and Decision Making



新任主管管理技巧 First Time Manager



重庆 Chongqing

上海 Shanghai

项目管理 Project Management: the Key for Success



上海 Shanghai / 武汉 Wuhan

北京 Beijing

企业内部讲师培训 Train the Trainer



上海 Shanghai / 长沙 Changsha / 武汉 Wuhan

压力管理 Pressure Management



成都 Chengdu




北京 Biejing




大连 Dalian




大连 Dalian



重庆 Chongqing

上海 Shanghai 大连 Dalian 北京 Beijing

大连 Dalian

上海 Shanghai

北京 Beijing

成都 Chengdu

北京 Beijing

管 理 / 领导力

Management / Leadership 科目 Items

人员招聘和甄选 Staff Recruitment and Selection

2012 / 06

2012 / 07 上海 Shanghai

2012 / 08 广州 Guangzhou

广州 Guangzhou / 长沙 Changsha / 武汉 Wuhan

重庆 Chongqing 北京 Beijing 北京 Beijing



咨询服务-案例解析与工作坊 Consulting Service-Case Study and Workshop 质量与运营能力 Quality & Operation 科目 Items

编号 No.

天数 Duration

2012 / 06

2012 / 07

2012 / 08

六西格玛与精益生产在企业中的运用 Appliance of 6 Sigma and Lean Manufacturing

QO W-03


供应商管理体系的设计 Design of Supplier Management System

QO W-04


生产看板系统建立与管理 Establishment and Management of Production Hoardings

QO W-05


一线班组管理TTT工作坊 TTT Workshop for Group Leader

QO W-07


广州 Guangzhou

上海 Shanghai

人力资源管理变革与规划 Reform and planning of Human resources

QO W-08


上海 Shanghai / 武汉 Wuhan


广州 Guangzhou 广州 Guangzhou 广州 Guangzhou


SME 人力资源管理能力提升工作坊 SME Human Resource Management Capacity Improvement

QO W-11


业务流程优化 Business Processes optimizing

QO W-14


企业流程重塑 Business Process Reshaping

QO W-13


上海 Shanghai

高绩效组织架构与流程管理 High Performance of Organization Structure and Process Management

QO W-15


广州 Guangzhou

服务业精益六西格玛绿带证书 Lean 6 Sigma Green Belt Applied in Service Industry"

QO W-16


现场改善 Gemba Kaizen

QO W-17


长沙 Changsha / 广州 Guangzhou

上海 Shanghai / 武汉 Wuhan

高绩效企业战略落地实践 High Performance company strategic landing practice

QO W-19


武汉 Wuhan

上海 Shanghai

80 / 90 后员工管理

QO W-20


武汉 Wuhan / 长沙 Changsha

科目 Items

编号 No.

天数 Duration

ISO 50001 能源管理体系内审员 ISO 50001 Internal auditor



企业节能技术与能效管理 Treasure Hunt & Energy Saving



广州 Guangzhou

ISO 14064 碳管理体系内审员 ISO 14064 Internal auditor



上海 Shanghai

GRI 认可可持续发展报告课程 GRI Approved Sustainability report Writing



上海 Shanghai

ISO 50001 能源管理体系建立 ISO 50001 System build-up



上海 Shanghai

长沙 Changsha

企业能效管理师 ※ Enterprise energy manager



广州 Guangzhou

上海 Shanghai

企业低碳管理与零碳未来战略 Low carbon management and Zero carbon strategy



武汉 Wuhan

上海 Shanghai

SME 如何编写社会责任报告 SME How to write CSR report



广州 Guangzhou

武汉 Wuhan / 长沙 Changsha

FIT FIVE - 工厂质量提升模块 FIT FIVE - Quality Improvement



上海 Shanghai / 长沙 Changsha

武汉 Wuhan

广州 Guangzhou

FIT FIVE - 生产效率提升模块 FIT FIVE - Productivity Improvement



上海 Shanghai / 长沙 Changsha

武汉 Wuhan

广州 Guangzhou

FIT FIVE - 企业社会责任模块 FIT FIVE - CSR



上海 Shanghai / 长沙 Changsha

武汉 Wuhan

FIT FIVE - 工厂化学品管理模块 FIT FIVE - Factory Chemical Management



FIT FIVE - 一线员工流失根源及务实对策模块 FIT FIVE - Staff Retaining: Root Cause and Solution



上海 Shanghai 广州 Guangzhou

北京 Beijing

广州 Guangzhou

武汉 Wuhan

企业社会责任与可持续发展能力 CSR & Sustainablility 2012 / 06

2012 / 07

2012 / 08

武汉 Wuhan

上海 Shanghai

上海 Shanghai / 长沙 Changsha

武汉 Wuhan

上海 Shanghai / 长沙 Changsha

广州 Guangzhou 广州 Guangzhou

上海 Shanghai / 长沙 Changsha

培訓服務 深圳 / 廣州





聯絡人: 敖麗華 小姐 Te l : 0755- 8268-1255/1254 電郵:

聯絡人: 楊怡 小姐 Te l : 021-6108-1149 電郵:

聯絡人: 張一凡 小姐 Te l : 010- 6566-6660 Ext 118 電郵:

聯絡人: 欒晶 小姐 Te l : 411- 8369-8380 電郵:

聯絡人: 許琳 小姐 Tel: 028-8621 0355-2218 電郵:

深圳 / 廣州



聯絡人: 王惠玲 小姐

聯絡人: 梁海棠 小姐

聯絡人: 何麗瑋 小姐

Te l : 020-28391888-1511 電郵:

Te l : 021-6108-1431 電郵:

Te l : 01- 6566-6660 Ext 128 電郵:




更少环境影响,更多市场机遇 For Consumer Products with a Smaller Environmental Impact



GC News Vol8_scen  

GC news TUV Rheinland

Read more
Read more
Similar to
Popular now
Just for you