Selection Steps For Control Transformers A Control Transformer is like an isolation transformer, which is a very often design that produces a high level of secondary voltage stability during the period of overload. These may usually find in the electronic circuit, especially the one that requires a constant voltage with a low volt amp rating. These may have two windings made of copper and high-quality materials. It allows a lower, safest and more efficient control circuit voltage to use in a number of applications. However, selecting the one that exactly matches your requirement is like finding a needle in the haystack, which is easier said than done. But with our selection tips, you can easily find the relia le optio , so, let’s start.
First of all, determine the supply and load voltages in an order to get the right device for your application; otherwise, it may create obstacles in its operation. After determining the load voltage it is important to calculate the total sealed VA by adding the actual VA requirements of all the components. You can get this information from any of the reputed Control Transformer Manufacturers from where you buy the device. After getting an estimate of sealed VA adds the inrush VA of all components together that present the exact load to the transformer during maximum inrush. As e k o , e ery de i e has a a eplate so do ’t forget to check it and also buy the device that provides enough voltage during maximum inrush at rated output that is needed by your application, otherwise, it may damage the system and cause the injury to the man and the machine.
The steps mentioned above will help you get the right device. But to get rest assured about its quality contact Isolation Transformer Manufacturers - Trutech Products. For more than 2 decades, we are leading the transformer industry, so, we have the right device at the right price.