At TRu Workwear, we strive to produce a market-leading workwear range that is longer-lasting and tailored to the Australian market. Our fabrics are engineered from specific yarns, providing our garments with inherent characteristics, ensuring they excel in harsh conditions. The fabric performance means the garments are built to last and will outlast the build. This is the TRu difference. By pushing the boundaries of garment design, we have innovated consistent, high-quality products that exceed all safety requirements in garment construction and fabric properties. From colourfastness to tear strength, even shrinkage rates, our garments outperform. With over 50 years of industry experience, the team at TRu Workwear has developed an intricate understanding of the market's requirements, ensuring we deliver on essential aspects of multiple industries, with products tailored for the trades, through to electrical arc exposure. Our business capabilities are established to support our local market from two distribution centres, on the east and west coast.
2
The TRu Difference 4-5 New Website 6-7 Driving a TRu Change 8-9 Standards 10-17 Iconography 18-19 Plus Series 22-41 Shirts 22-41 Lightweight 24-27 Lightweight Rail Ripstop Regular Weight Closed Front Polos Safety Vests
Trousers & Shorts Lightweight Midweight Heavyweight Denim Shorts
28-29 30-31 32-33 34-37 38-39 40-41
42-55 44-45 46-47 48-51 52-53 54-55
Coveralls 56-61 Women's Workwear 62-69 Shirts 64-67
Trousers
68-69
Jackets 70-89 Fleece 72-75 Softshell & Cotton Weatherproof Rain set
76-77 78-85 86-89
Core Series 90-95 Men's Range 92-93 Women's Range 94-95 Accessories 96-97 Bool FR Garments 98-135 Bool Technology 100-101 Parvotex Fabric 102-103 FR Iconography 104-105 FR Shirts 106-111 FR Trousers & Coveralls 112-117 FR Jackets 118-121 Standards 122-135 Laundering 136-137 Fitting Guide 138-139 Custom Workwear 140-141 3
The TRu DIFFERENCE AUSTRALIAN DESIGNED TRu Workwear constructs light and breathable garments with high UPF ratings through extensive yarn development, essential properties for combating harsh Australian conditions. The garment construction - retroreflective tape and high-visibility material configurations - meet Australian safety specifications, providing the wearer with maximum protection. TRu Workwear ensures that every garment meets Australian standards.
CERTIFIED Workwear in Australia is only required to comply with the necessary Australian or European standards. Compliance, however, is a simple claim often made without verification. For TRu Workwear this is not enough, seeking assurance from an independent Notifying Body (NB), BSI Group. Certification of products by BSI Group ensures the product actually meets compliance claims. This validation by the NB is vital for ensuring garment protection levels are accurate. TRu Workwear has raised the bar within the Australian market by ensuring its products are certified to the highest safety standards, a point of difference that provides peace of mind to the wearer and distributor.
INNOVATIVE Yarn innovation is the driving force behind our garments. New spinning and dying techniques have allowed the production of garments that last longer and are lighter yet offer more protection, essential for Australian conditions. As a business, we have been investing in research and development to drive innovation, and we remain a market leader in producing industry-first garments.
DURABLE For a product to outlast the build, it must be built to last; this is why we construct all TRu Workwear from the yarn up. We produce and test all garments with technological advancements and yarn spinning innovations, ensuring they exceed fabric specifications and testing. Rigorous testing measures allow us to stand behind our products, knowing they will outlast their intended use.
COMFORTABLE Australia has some of the harshest working conditions of any country around the world. TRu Workwear is designed to combat sweltering Australian summers as well as its cold crisp mornings. Venting systems that combine horizontal/vertical cooling vents and underarm mesh vents for breathability, fabrics with high-visibility colour fastness and UPF 50+ protection will withstand the Australian sun and are essential garment features to ensure comfortable working conditions. With the everincreasing need for workwear to last, comfortable and well-fitting products are paramount. All of TRu Workwear's products are fit tested and trialled for user comfort. Our garments are for the worker.
4
LOCAL SUPPORT NATIONAL SUPPLY
With a distribution centre on both the East and West Coast and Business Development Managers servicing each state, TRu Workwear is setup to support the end-user and our distributors efficiently and professionally nationwide. With our West Coast DC supplying Northern Territory, Western Australia and South Australia and the East Coast DC supplying Queensland, New South Wales, Victoria and Tasmania, we offer fast and efficient service levels.
We have a dedicated customer support team available to discuss any of our products and services, which can help with enquiries relating to your TRu Workwear requirements. Please contact us using the details below. 08 9331 1141
sales@trubrands.com.au 5
NEWWEBSITE
View Products
6
Download Technical Data
Standards Education
DISTRIBUTOR PORTAL Resource Centre Datasheets Product images Standards information Declarations of conformity
Flyer & catalogue downloads Product videos Brand logos Social media posts
Online Ordering Order online Live stock Bulk ordering Quick reordering Quick add Packaging breakdown
Customised favourites View purchase history Track and trace orders Customised pricing Price breaks
Account Management & Payments View account balance View statements View or print invoices
Pay invoices Pay on account or credit card Update account information
7
SUSTAINABILITY GOALS
DRIVING A TRu CHANGE TRu Workwear proudly supports the United Nations Global Compact Sustainable Development Goals (SDG) program. As a signatory member, TRu Workwear looks forward to posting its first Communication on Progress (CoP) report in 2021; outlining the actions and initiatives it has carried out in line with its commitment and obligations to the UNGC and the world in which we live.
Corporate sustainability starts with a company's value system and a principles-based approach to doing business. In practice, this means operating in ways that, at a minimum, meet fundamental responsibilities in the areas of human rights, labour, environment and anti-corruption. Responsible businesses enact the same values and principles wherever they have a presence and know that good practices in one area do not offset harm in another. In late 2020 TRu Workwear decided that the best way to develop its corporate sustainability in a meaningful way was to align its goals with those of the United Nations Global Compact (UNGC). As a special initiative of the UN Secretary-General, the United Nations Global Compact is a call to companies everywhere to align their operations and strategies with ten universal principles in human rights, labour, environment and anti-corruption, and to take action in support of UN goals. With more than 10,000 companies and 3,000 non-business signatories based in over 160 countries, and more than 60 local networks, it is the largest corporate sustainability initiative in the world. By incorporating the Ten Principles of the UNGC into strategies, policies and procedures, and establishing a culture of integrity, companies uphold their essential responsibilities to people and the planet and set the stage for long-term success. For the UNGC Ten Principles to be realised, transformational change must occur. The UNGC Social Development Goals (SDGs) allow businesses a framework to engage with the world and fulfill their commitments and achieve a more sustainable and equitable world for 2030. By aligning itself to these SDGs, TRu Workwear can make effective change within its own business and active engagement with the broader local community and internationally to play its part in this global sustainability initiative.
8
The UNGC pursues two main objectives: 1. Incorporate the Ten Principles into business activities around the world. 2. Channel actions in support of the broader goals of the United Nations, including its seventeen Sustainable Development Goals (SDGs).
HUMAN RIGHTS
LABOUR
ENVIRONMENT
ANTI-CORRUPTION
Principle 1 Businesses should support and respect the protection of internationally proclaimed human rights; and
Principle 3 Businesses should uphold the freedom of association and the effective recognition of the right to collective bargaining;
Principle 7 Businesses should support a precautionary approach to environmental challenges;
Principle 10 Businesses should work against corruption in all its forms, including extortion and bribery.
Principle 2 make sure that they are not complicit in human rights abuses.
Principle 4 the elimination of all forms of forced and compulsory labour; Principle 5 the effective abolition of child labour; and Principle 6 the elimination of discrimination in respect of employment and occupation.
Principle 8 undertake initiatives to promote greater environmental responsibility; and Principle 9 encourage the development and diffusion of environmentally friendly technologies.
9
10
Australia's First Certified Range of Workwear Product Certification Australian and New Zealand standards created to regulate workwear, are developed by joint technical committees consisting of representatives from relevant organisations, including Australian/New Zealand government bodies, universities and technical specialists like the CSIRO. These standards are approved by the Council of Standards Australia and are what a global independent Notified Body (NB) such as BSI Group use as the basis of product certification. Australian and New Zealand standards align with European and other international standards but differ on some performance requirements. Workwear standards include but are not limited to the following:
S/NZS 1906.4:2010 - Retroreflective materials and devices for road traffic A control purposes - Part 4: High-visibility materials for safety garments S/NZS 4602.1:2011 - High-visibility safety garments - Part 1: Garments for A high risk applications STM F1959/F1959M (NFPA 70E) - Test method for determining the arc rating A of materials for clothing Products in Australia only require to comply with the above standards. Compliance with a safety standard is simply a claim without verification. Simple compliance is unacceptable for TRu Workwear and Bool Workwear. Certification of products by an independent Notified Body (NB) ensures the product indisputably meets safety claims. This validation by the NB is vital for ensuring the protection levels are accurate. In Europe, certification to the latest workwear standards is mandatory – in Australia, it is not. TRu Workwear has raised the bar by ensuring our entire range of products are certified. A point of difference that verifies TRu Workwear is the safest, giving peace of mind to the wearer, employer and distributor.
11
GARMENT FABRIC & MATERIALS
AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes Part 4: High-visibility materials for safety garments High-visibility workwear is a trusted safety tool onsite. High-visibility fabrics and retroreflective materials are essential for a safety garment, as stipulated by standard AS/NZS 4602.1:2011, which benchmarks the safety requirements for a workwear garment in its entirety. AS/NZS 1906.4:2010 states that high-visibility workwear is comprised of two categories of materials; high-visibility fabrics and retroreflective materials. These materials have different properties that create strong optical effects when responding to either natural or generated light sources. They are both uniquely essential for providing visibility in particular environmental conditions and times of the day.
TESTING METHODS The AS/NZS 1906.4:2010 standard aims to confirm a fabrics' visibility with a 'daytime colour and luminance factor test' that compares the fabrics' properties against the standards benchmark results. It does so by assessing the levels of the following fabric properties and additional durability testing as below: FABRIC PROPERTIES
DURABILITY TESTING
Chromaticity - Quality of colour independent of brightness
Colourfastness after UV exposure
Photometric - Perception of light in terms of brightness or luminescence
Colourfastness to washing test
Colormetric - Concentration of a chemical compound responsible for colour and other physical property requirements
Colourfastness to perspiration test
The result is a classification system that places the fabrics in four categories in terms of fluorescence and reflective properties, as stipulated on the right.
MATERIAL TYPES Retroreflective Material
High-Visibility Fabric
Retroreflective material reflects light directly back to its source, a valuable property when conducting night works. In the absence of daylight, workers rely on artificial light sources like torches and car headlights to see their environment. Retroreflective materials will return the light from these artificial light sources back to the viewer.
High-visibility fabric reflects the sunlight and appears brightest during the day. It can be either fluorescent like the bright glowing yellow of a micromesh polo shirt or non-fluorescent like the richer yellow of a cotton drill shirt - this is dependent on the garments fibres.
12
CLASS F
High Daytime Visibility Fluorescent Material Class F garments are the most common class. This class consists of garments with high-visibility fabric. The high-visibility fabric is woven or knitted out of natural or man-made fibres dependent on a particular high-visibility colour range. The standard specifies the use of specific colour spaces of yellow, orange and orange/red. Fabric fibres that meet Class F are manipulated to retain more fluorescent dye for a longer duration than natural fibres. Wet weather garments can achieve a Class F (W) where the material passes an optional wet weather test along with the Class F classification.
CLASS NF High Daytime Visibility Non-Fluorescent Material Class NF is given to fabrics - typically made from natural fibres - which have a lower chromaticity level due to the nature of the material. Natural fibres tend to be highly breathable, and for this reason, many prefer their use to combat humid conditions and extensive sun exposure. Natural fibre garments tend to have reduced colour retention properties when they undergo prolonged exposure to UV rays. It is especially important for natural fibre garments to be labeled with the NF classification as they must be properly inspected regularly for colour fading.
CLASS R Retroreflective Material Class R Retroreflective material is applied to workwear garments in the form of reflective tape. This material reflects beams of artificial light sources - such as car headlights - directly back to the viewer. This fabric type is essential for night-time garments.
CLASS RF Combined Performance of Class R and Class F Class RF garments combine retroreflective and fluorescent fabrics in their construction. They are garments with reflective tape that meets Class R and Class F meaning, not only does it reflect light back to its source but it also achieves a high visibility rating, similar to a cotton drill shirt. Reflective tape on these garments must fall into the specific colour spaces of yellow, orange and orange/red.
13
GARMENT CONSTRUCTION
AS/NZS 4602.1:2011 High-visibility safety garments - Part 1: Garments for high-risk applications High-visibility clothing is mandatory safety equipment for road, rail, and other industries with a similarly high-risk level. Safety garments should be worn by people who require visibility at a distance, against complex backgrounds and around conditions that obstruct vision. The AS/NZS 4602.1:2011 standard acknowledges the harsh conditions workwear must protect against and directs how a high-visibility garment is constructed. Construction refers to the garments overall design. For workwear, this specifically means the configuration and amount of two safety materials; fluorescent and retroreflective.
This standard accompanies AS/NZS 1906.4:2010 Retroreflective materials and devices for road traffic control purposes - Part 4: High-visibility materials for safety garments. The materials in AS/NZS 1906.4:2010 provide differing levels of visibility depending on the time of the day, amount of light available and what type of light it is - natural or artificial. AS/NZS 4602.1:2011 has outlined what garment construction is safest for day, night and day/night use. Depending on the sites working requirements, personnel need to assess which of the following classifications will provide the best visibility. Below are a few examples of products that would not comply with AS/NZS 4602.1:2011 performance requirements.
Incorrect Fluoro Area
Non-Fluoro Fabrics
Broken Tape
Fluoro area should be no less than 0.2m²
Dyed fabrics must meet chromaticity levels to comply with standards.
Reflective tape must not be broken or have gaps
THE RECOMMENDED TAPE PATTERN - BIOMOTION Biomotion is defined by two hoops around the arms and legs. This tape configuration, although not mandatory, is highly recommended in the AS/NZS standard. There must be a hoop above and below the joint, a knee or elbow joint. A biomotion tape configuration ensures the limb is visible when bent and will increase visibility at a long distance.
14
CLASS D Day Use
The garment requires a minimum of 0.2m2 of unbroken high-visibility fabric, covering the front and back of the wearer's torso. This section of fabric should not be broken or covered by features such as ID cardholders. Logos, words and pockets can be included but must not infringe on the 0.2m2 of unbroken high-visibility. Likewise, underarm vents that don't meet the colour specification of AS/NZS 1906.4:2010 are not included. Garment material must comply with AS/NZS 1906.4:2010 Class F and NF material by meeting the necessary fluorescence levels. Class D garments are not advised to be worn for night-time applications. Fluorescent materials are generally not reflective when exposed to artificial light. Therefore, the garment would pose a risk to the wearer, as stated on the labelling.
CLASS N Night Use
Class N garments are designed only for night-time, where natural light is replaced by artificial light sources such as the fluorescent lights of a warehouse or the headlights of a car. For this reason, unlike Class D garments, Class N garments do not have a specified high-visibility material requirement and can be constructed from white, pink and sky blue fabrics. Night garments instead rely on retroreflective material, reflective tape, which creates enhanced visibility by reflecting artificial light back to its source. It is essential for night worn garments to have an adequate amount of reflective tape placed on the most visible positions of the body - the standard outlines five exact tape configurations to the millimetre, which will ensure maximum visibility. These configurations are commonly referred to as ‘biomotion’, ‘double hoop’, ‘H-pattern’ (back and front) and ‘X-back’ patterns. Due to lack of Class F or Class NF fluorescent material, these garments are not suitable to be used during the day.
CLASS D/N Day / Night Use
Class D/N garments are designed to provide wearer visibility in both day and night-time conditions. These garments combine the requirements of Class D high-visibility fabric with Class N requirements of reflective tape configurations. Like Class D, Class D/N garments must have the same 0.2m2 high-visibility fabric on the front and back torso, compliant to AS/NZS 1904.4:2010 Class F material standards. Class NF fabric can be used instead, with the caveat of reduced high-visibility properties and differing care instructions. High-visibility fabric must also be accompanied by Class R or Class RF reflective tape.
15
SUN PROTECTION
AS 4399:2020 Sun protective clothing - Evaluation & classification Long days under the harsh Australian sun can be dangerous without the right safety equipment. TRu Garments are UPF50+, reducing the risk of skin cancer and premature aging.
ULTRAVIOLET PROTECTION FACTOR The Australian standard for sun protective clothing, AS 4399:2020, measures the Ultraviolet Protection Factor (UPF). UPF refers to the amount of solar ultraviolet radiation (UVR) that passes through an unstretched dry fabric. This includes both types of UV radiation that reach the Earth's surface; UVA and UVB. UVA rays are more abundant and deeply penetrate the skin with damaging effects such as photoaging. There are around 500 times more UVA rays in sunlight than UVB rays. UVB rays are the most potent contributor to causing skin cancers, responsible for the formation of malignant melanoma.
TESTING PROCEDURE TRu Workwear garments are UPF tested under AS 4399:2020. The UPF testing is carried out at the fabric testing laboratory of ARPANSA or the Australian Radiation Protection And Nuclear Safety Agency. ARPANSA's laboratory is accredited by the National Association of Testing Authorities (NATA). These companies issue test reports outlining compliance to the AS 4399:2020 standard. A report will provide the UPF ratings of the materials tested but does not evaluate the design or body coverage of the products. When measuring to the standard, a UPF rating is calculated based on the amount of ultraviolet radiation (UVR) that can pass through a dry unstretched fabric. Wet fabric and the knitted materials create variations in the level of UVR protection on a garment. Denser fabrics with tighter weaves stretch less and therefore offer more robust UVR protection. The standard allows for variations in fabric types on a single garment, such as underarm mesh vents on workwear shirts. However, all fabric used on critical body parts must achieve a UPF rating. The AS 4399:2020 version of the standard specifies three protection classifications, dependent on the amount of UVR blocked as corresponding below: UPF RATING
CLASSIFICATION
15
Minimum protection
30
Good protection
50, 50+
Excellent protection
The numerical score is based on the amount of UVR blocked, rated on a scale from 15 to 50+. The highest assigned rating for a UPF rated fabric is 50+. If a fabric blocks 95% of the UV rays - allowing 1/20th of the UV radiation through - it would be assigned a UPF20 rating. If the garment is rated as UPF50+ then it is recorded as letting through less than 1/50 of the radiation that hits the garment, meaning it provides excellent sun protection.
For onsite outdoor activity you require materials with a UPF50+ rating, which is capable of all day sun protection
MINIMAL SKIN EXPOSURE The standard assesses clothing for how well it is constructed to cover the largest area of the body, as explained on the garment's swing tag: “The UPF rating applies only to the area of skin covered. Protection may be reduced if the material is wet, stretched or from the effects of normal wear or exposure to chemicals. For best sun protection use hats, clothing that provides maximum skin coverage, sunglasses, and sunscreen and shade.” Garments can be designed to cover the lower body, upper body or all in one. Each category has specific requirements. For 'upper body' coverage, the garment's sleeves must protrude more than 3/4 of the upper arm (i.e. a singlet would not be sufficient) and include the shoulders and torso. For lower body coverage, pants must cover at least halfway down the thighs, extending from the hip. SPF sunscreen must be applied to areas of the body left exposed by the garment to ensure total protection.
LABELLING The AS 4399:2020 stipulates that all compliant garments be permanently labeled with the following statement: Level of protection - "UPF50+ - Excellent protection" "Maximum skin coverage helps prevent skin damage"
16
Made for Australian conditions TRu Workwear garments are made for the harsh Australian conditions, with every garment reaching a UPF rating of Excellent 50+. We take sun safety seriously, giving all wearers maximum UV protection and options for heavily vented garments to avoid heat exhaustion.
17
GARMENT TECHNOLOGY
ICONOGRAPHY FABRIC TYPES
Our cotton fabric facilitates multiple garment weights, from light through to heavy. Each offers different properties like breathability or durability.
Ripstop fabric is manufactured using a unique reinforcing technique that makes the fabric highly resistant to tearing.
Polyester fabric is made from strong yet lightweight fibres; wrinkle-resistant, stain-resistant and fast drying. Polyester fibres retain high-visibility dyes for long periods.
Micromesh is a lightweight polyester fabric giving complete breathability to the wearer. Perfect for sweltering and humid conditions where optimum airflow is essential.
Strong, durable 14.5-ounce denim, withstanding long-term wear. Denim is a versatile fabric suitable for transitioning between onsite and offsite work.
Polyester Oxford is the highest quality polyester fabric. Flexible fibre construction makes the fabric breathable, and high abrasion resistance gives this fabric excellent longevity.
Softshell fabric provides water resistance and comfort with its triple-layered fabric construction. It is a softer and more flexible material for use in constructing wet weather garments.
Bamboo fabric is constructed from natural fibres, giving these garments superior moisture-wicking properties. Bamboo is also a fast-growing plant, which replenishes rapidly.
GARMENT WEIGHTS TRu Workwear fabrics come in multiple garment weights from light through to heavy. Each offers different properties like breathability or durability.
18
Lightweight
Midweight
Heavyweight
Lightweight fabrics are the perfect solution for our warm Australian summer. They are comfortable breezy garments with optimal air flow, best for long hot days onsite.
The TRu Workwear midweight series of fabrics range in weights from 190 to 270gsm. The 190gsm polyester taffeta is a brilliant midweight waterproof solution, whilst the 270gsm cotton canvas ensures a substantial warm winter garment.
The TRu Workwear heavyweight fabric series is a staple of winter garments. From 300gsm polyester through to 300D polyester oxford fabric, these are the perfect solution to keep you warm and dry in winter.
TAPE TYPES TRuVis Reflective Tape TRuVis Reflective tape is a premium sew-on tape compliant to AS/NZS 1906.4:2010 Class R.
TRuVis Segmented Tape Segmented tape is heat applied and is compliant to AS/NZS 1906.4:2010 Class R. Segmentation of the tape makes it lighter in weight and increases the flexibility of the garment.
TRuVis Perforated tape TRuVis Perforated Reflective Tape is compliant to AS/NZS 1906.4:2010 Class R. Perforations in the tape allows hot air to escape underneath making it the perfect choice for highly breathable garments.
3M™ Reflective Tape The 3M™ Reflective tape is a premium sewn on reflective tape compliant to AS/NZS 1906.4:2010 Class R.
19
The TRu Workwear Plus Series goes above and beyond. These are highly spec'd heroes. With double stitching and cooling vents, they are for the harsh Australian environment. Built to outlast and outlast the build.
Conformance to a standard is simply a claim. Certification of products by an independent Notified Body (NB) ensures the product actually meets the claim. This is the TRu Workwear point of difference
20
21
SHIRTS
22-41
Lightweight
24-27
28-29
Lightweight Rail
Ripstop
30-31
Regular Weight
32-33
Closed Front
34-37
Polos
38-39
40-41
Safety Vests
22
23
Lightweight Shirts
DS2166T1-Y/N
24
Lightweight Shirts
Lightweight Vented L/S Hi-Vis Drill Shirt DS2166
1
20
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2166-Y/N S-5XL
DS2166-O/N S-5XL
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape DS2166T1
EXTENDED SIZES
1
AVAILABLE IN
PAGE 93
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
Lightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DS2166T1-Y/N XS-6XL
DS2166T1-O/N
XS-6XL
WOMEN'S CUT DSW2166T1 (see page 65)
Lightweight Vented S/S Hi-Vis Drill Shirt DS2165
1
20
Lightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2165-Y/N
S-5XL
DS2165-O/N
S-5XL
25
Lightweight Shirts
Lightweight Vented L/S Hi-Vis Drill Shirt DS1118
1
20
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility Vertical back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS1118-ORA
S-5XL
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape DS1118T1
1
20
Features
Performance
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Vertical back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with BSI Certified Product AS/NZS 1906.4:2010 Standard AS/NZS 1020:1995 AS/NZS 4602.1:2011
DS1118T1-ORA
S-5XL
Lightweight Vented L/S Hi-Vis Drill Shirt with TRuVis Tape DS1166T3
1
20
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with BSI Certified Product Standard AS/NZS 1020:1995 AS/NZS 1906.4:2010 Features
Performance
AS/NZS 4602.1:2011
DS1166T3-ORA
26
S-5XL
Lightweight Shirts
COOLING VENTS Workwear that is combating the harsh Australian heat with comfortable ventilation where it is needed. Breathable garments use high-visibility mesh fabric certified to garment construction standard AS/NZS 4602.1:2011 to increase the cooling flow of air.
DS2166T1-Y/N
27
Lightweight Rail Shirts
DS1166T5-SPO
28
Lightweight Rail Shirts
Lightweight NSW Rail Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape DS1166T5
NSW RAIL
1
20
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility TRuVis Perforated Tape tested to Standard AS/NZS 1906.4:2010 ‘X-back’ compliant to NSW rail standards and biomotion sleeve tape configuration to enhance visibility of limbs during movement Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with BSI Certified Product Standard AS/NZS 1020:1995 AS/NZS 1906.4:2010 Features
Performance
AS/NZS 4602.1:2011
DS1166T5-SPO
S-5XL
WOMENS CUT DSW1166T5 (see page 67)
Lightweight VIC Rail Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape DS1166T4
VIC RAIL
EXTENDED SIZES
1
20
Lightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility TRuVis Perforated Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder,’ and double hoop tape configuration with biomotion sleeve tape configuration to enhance visibility of limbs during movement Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Fabric controls undesired static electricity in accordance with BSI Certified Product Standard AS/NZS 1020:1995 AS/NZS 1906.4:2010 Features
Performance
AS/NZS 4602.1:2011
DS1166T4-ORA
XS-6XL
RAIL 'X-BACK' TRu rail shirts are designed specifically for Australian rail workers. Tape that crosses over the shoulder as stipulated in AS/NZS 4602.1:2011 is the approved configuration for both the NSW and VIC sectors. However, the requirements for the type and size varies for these states. DS1166T5-SPO
29
Ripstop Shirts
DS2169T1-O/N
30
Ripstop Shirts
RIPSTOP FABRIC Reinforced cotton fabric is resistant to abrasion and tearing. Ripstop fabric is relied on by construction and mining industries, which require a robust and durable material tough enough to withstand hard work.
DS2169T1-O/N
Ripstop Vented L/S Hi-Vis Shirt DS2169
1
20
E xtra lightweight ripstop cotton fabric offering comfort and superior durability Colour-fast fabric maintaining long-term high-visibility Horizontal back cooling vents and underarm mesh vents offer comfort in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2169-Y/N
DS2169-O/N
S-5XL
S-5XL
Ripstop Vented L/S Hi-Vis Shirt with 3M™ Tape DS2169T1
1
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
Extra lightweight ripstop cotton fabric offering comfort and superior durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Horizontal back cooling vents and underarm mesh vents offering comfort in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DS2169T1-Y/N
S-5XL
DS2169T1-O/N
S-5XL
31
Regular Weight Shirts
DS2112T1-Y/N
32
Regular Weight Shirts
Regular Weight L/S Hi-Vis Drill Shirt DS2112
1
20
Durable regular weight cotton fabric Colour-fast fabric maintaining long-term high-visibility Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2112-Y/N S-5XL
DS2112-O/N S-5XL
Regular Weight L/S Hi-Vis Drill Shirt with 3M™ Tape DS2112T1
1
20
urable regular weight cotton fabric D Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2112T1-Y/N S-5XL
DS2112T1-O/N S-5XL
WOMEN'S CUT DSW2112T1-Y/N (see page 65)
Regular Weight L/S Hi-Vis Drill Shirt with 3M™ Tape DS1112T1
1
20
Durable regular weight cotton fabric Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS1112T1-ORA
S-5XL
33
Closed Front Shirts
DS2164T1-Y/N
34
Closed Front Shirts
Lightweight Vented L/S Closed Front Hi-Vis Drill Shirt with 3M™ Tape DS2164T1
1
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
L ightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Horizontal back cooling vents and underarm mesh vents offer comfort in hot and humid conditions Four buttoned closed front placket Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DS2164T1-Y/N S-5XL
DS2164T1-O/N
S-5XL
Regular Weight L/S Cotton Closed Front Hi-Vis Shirt DS2114
1
20
urable regular weight cotton fabric D Colour-fast fabric maintaining long-term high-visibility Four buttoned closed front placket Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS2114-Y/N S-5XL
DS2114-O/N
S-5XL
Regular Weight L/S Cotton Closed Front Hi-Vis Shirt with 3M™ Tape DS2114T1
1
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
urable regular weight cotton fabric D Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Four buttoned closed front placket Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DS2114T1-Y/N S-5XL
DS2114T1-O/N
S-5XL
35
Closed Front Shirts
DS1114T1-ORA
Regular Weight L/S Cotton Hi-Vis Closed Front Shirt with 3M™ Tape DS1114T1
1
20
urable regular weight cotton fabric D Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 in double hoop configuration Four buttoned closed front placket Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DS1114T1-ORA S-5XL
36
3M SCOTCHLITE REFLECTIVE TAPE
Closed Front Shirts
™
™
Industry trusted 3M™ Scotchlite™ reflective tape is certified to various global safety standards, including AS/NZS 1906.4:2010. With engineered superior reflective strength, this industry-leading technology provides garments with the safest levels of garment visibility.
DS2164T1-Y/N
37
Polo Shirts
TS2851-Y/N
38
Polo Shirts
EXTENDED SIZES
1
Extra lightweight 100% Polyester fabric Breathable micro-mesh polyester garment Ideal for outdoor daytime wear with colour-fast fabric maintaining long-term high-visibility Two toned fabric and ribbed collar Three buttoned closed front placket Single buttoned pocket, with pen partition
20
TS2851-Y/N
TS2851-O/N
XS-5XL
EXTENDED SIZES
1
TS2850-Y/N
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TS2850T3-Y/N
XS-5XL
TS2850T3-O/N
XS-5XL
TS2850-O/N
XS-5XL
20
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
XS-5XL
Micromesh L/S Hi-Vis Polo NSW Rail Shirt with TRuVis Perforated Tape TS1850T5
NSW RAIL
EXTENDED SIZES
1
20
Extra lightweight 100% Polyester fabric Breathable micro-mesh polyester garment Ideal for outdoor daytime and night-time wear with colour-fast fabric maintaining long-term high-visibility TRuVis Perforated Reflective Tape ‘Over the shoulder’ and ‘X-back’ compliant to NSW Rail standards Single buttoned pocket BSI Certified Product Three buttoned closed front placket AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Features
Performance
Extra lightweight 100% Polyester fabric Breathable micro-mesh polyester garment Ideal for outdoor daytime and night-time wear with colour-fast fabric maintaining long-term high-visibility TRuVis Reflective Tape in double hoop configuration Two toned ribbed fabric, collar and cuff Three buttoned closed front placket Single buttoned pocket, with pen partition
20
1
Extra lightweight 100% Polyester fabric Breathable micro-mesh polyester garment Ideal for outdoor daytime wear with colour-fast fabric maintaining long-term high-visibility Two toned ribbed fabric, collar and cuff Three buttoned closed front placket Single buttoned pocket, with pen partition
XS-5XL
Micromesh L/S Hi-Vis Polo Shirt with TRuVis Tape TS2850T3
EXTENDED SIZES
Features
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TS2850
Performance
TS2851
Micromesh L/S Hi-Vis Polo Shirt
Performance
Micromesh S/S Hi-Vis Polo Shirt
TS1850T5-ORA XS-5XL
39
Safety Vests
CWRX194-ORA
40
Safety Vests
Force360 Day Safety Vest CWRX190
CWRX191
1
25
Features
Performance
Durable 100% polyester material Dual velcro closure for convenient fit and comfort High-visibility stitched edge tape Class D - Garments suitable for day use only as per AS/NZS 4602.1:2011, AMD 1:2016. High-visibility garments compliant to AS/NZS 1906.4:2010
CWRX190-ORA
CWRX191-YEL
S-4XL
S-4XL
Force360 Day/Night Safety Vest CWRX192
CWRX193
1
25
Features
Performance
Durable 100% polyester material Dual velcro closure for convenient fit and comfort 50mm sewn reflective tape ensures extended life Rear tail band for added visibility and safety when bending ‘H’ pattern reflective tape on rear of vest Class D/N - Garments suitable for day or night use as per AS/NZS 4602.1:2011, AMD 1:2016. High-visibility garments compliant to AS/NZS 1906.4:2010
CWRX192-ORA
CWRX193-YEL
S-4XL
S-4XL
Force360 Day/Night Safety Vest CWRX194
1
25
Features
Performance
Extra lightweight, durable 100% polyester fabric Dual Velcro front seem for easy tear 50mm sewn reflective tape ensures extended life Easy tear away hook and loop on shoulder and underarms Anti-pill polyester fabric for easy maintenance and long-lasting use Reflective Tape in ‘H-front’ and ‘H-back’ tape configuration Rear tail band for added tape visibility when bending Class D/N - Garments suitable for day or night use as per AS/NZS 4602.1:2011, AMD 1:2016. High-visibility garments compliant to AS/NZS 1906.4:2010
CWRX194-ORA
S-4XL
41
TROUSERS & SHORTS
42-55
Lightweight 44-45 Midweight 46-47 Heavyweight 48-51 Denim 52-53 Shorts 54-55
42
43
Lightweight Trousers
DT1138-NAV
44
Lightweight Trousers
Lightweight Cotton Trousers DT1138
Lightweight Cotton Trousers with 3M™ Tape 1
Durable Lightweight cotton fabric Two hip pockets, single rear pocket and a coin pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DT1138T
1
20
Durable Lightweight cotton fabric 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Two hip pockets, single rear pocket and a coin pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1138-NAV 77R-112R | 87S-132S | 79L-94L
Performance
Features
Performance
Features
*Class N only applicable when worn with a compliant shirt
DT1138T-NAV 77R-112R | 87S-132S | 79L-94L
45
Midweight Trousers
DT1150T-NAV
46
Midweight Trousers
AVAILABLE AS TROUSER IN
PAGE 93
Midweight Cotton Cargo Trousers DT1150
Midweight Cotton Cargo Trousers with 3M™ Tape 1
Durable midweight cotton canvas fabric T wo cargo pockets, two hip pockets and two rear patch pockets with flaps Phone and multi-tool pocket Range of sizes for a comfortable waistline fit Wider belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DT1150T
1
20
Durable midweight cotton canvas fabric 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Two cargo pockets, two hip pockets and two rear patch pockets with flaps Phone and multi-tool pocket Range of sizes for a comfortable waistline fit Wider belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1150-NAV DT1150-GRN 77R-112R | 87S-132S | 84L-94L
Performance
Features
Performance
Features
*Class N only applicable when worn with a compliant shirt
DT1150T-NAV 77R-112R | 87S-132S | 79L-94L
DT1150-BLK 77R-112R | 87S-132S | 79L-94L WOMEN'S CUT DTW1150-NAV (see page 69)
47
Heavyweight Trousers
DT1142T2-NAV
48
Heavyweight Trousers
Heavyweight Cotton Trousers DT1140
Heavyweight Cotton Trousers with 3M™ Tape 1
H eavyweight cotton fabric offering sturdiness and durability Two hip pockets, single rear pocket and coin pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DT1140T
1
20
Heavyweight cotton fabric offering sturdiness and durability 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Two hip pockets, single rear pocket and coin pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1140-NAV 77R-112R | 87S-132S | 84L-94L
Performance
Features
Performance
Features
*Class N only applicable when worn with a compliant shirt
DT1140T-NAV 77R-112R | 87S-132S | 79L-94L
49
Heavyweight Trousers
Heavyweight Cotton Cargo Trousers DT1142
Heavyweight Cotton Cargo Trousers with 3M™ Tape 1
Heavyweight cotton fabric offering sturdiness and durability T wo hip pockets, two cargo pockets and single rear pocket Coin and tool pocket Range of sizes for a comfortable waistline fit Wide belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DT1142T
1
Heavyweight cotton fabric offering sturdiness and durability 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Two hip pockets, two cargo pockets and single rear pocket Coin and tool pocket Range of sizes for a comfortable waistline fit Wide belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1142-NAV 77R-112R | 87S-132S | 84L-94L
50
Performance
Features
Performance
Features
*Class N only applicable when worn with a compliant shirt
DT1142T-NAV 72R-112R | 87S-132S | 79L-94L
20
Heavyweight Trousers
Heavyweight Cotton Cargo Trousers with Biomotion 3M™ Tape DT1142T2
1
20
H eavyweight fabric cotton offering sturdiness and durability 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Biomotion tape configuration for enhanced visibility Two hip pockets, two cargo pockets and single rear pocket Coin and tool pocket Wide belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
*Class N only applicable when worn with a compliant shirt
DT1142T2-NAV 77R-112R | 87S-132S
DT1142T2-NAV
51
Denim Trousers
DT1154T-NAV
52
Denim Trousers
Denim Jeans
Denim Jeans with 3M™ Tape
DT1154
1
14.5 ounce sturdy denim Five pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DT1154T
1
20
14.5 ounce sturdy denim 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Five pocket Range of sizes for a comfortable waistline fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1154-NAV 77R-112R | 87S-132S | 79L-94L
Performance
Features
Performance
Features
*Class N only applicable when worn with a compliant shirt
DT1154T-NAV 77R-112R | 87S-132S | 79L-94L
53
Shorts
DT1147-NAV
54
Shorts
DT1147
1
20
DT1139
DT1147-GRN 77R-112R
1
20
Heavyweight cotton fabric offering comfort, flexibility and durability Two cargo pockets and two back pockets Tool pocket on right-hand pocket Wider belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Features
Performance
Midweight fabric offering comfort, flexibility and durability Two cargo pockets and two back pockets Coin pocket on right-hand pocket Wider belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DT1147-NAV 77R-112R
Heavyweight Cotton Cargo Short
Performance
Midweight Cotton Cargo Shorts
DT1139-NAV 77R-112R
55
COVERALLS
56-61
Cotton Drill
58-60
Action Back
60-61
56
57
Cotton Drill Coveralls
DC2120T1-O/N
58
Cotton Drill Coveralls
Lightweight Hi-Vis Coverall with 3M™ Tape
Lightweight Hi-Vis Coverall with 3M™ Tape
DC2120T1
DC1120T1
1 10 L ightweight fabric offering comfort, flexibility and durability Two tone colour combination 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Heavy duty nylon press studs Adjustable cuff for durable comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
1 10 Lightweight cotton fabric offering comfort, flexibility and durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Heavy duty nylon press studs Adjustable cuff for durable comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DC2120T1-Y/N
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DC2120T1-O/N
77R-122R | 87S-132S | 79L-94L
DC1120T1-ORA 77R-117R | 92S-132S | 84L-94L
59
Cotton Drill Coveralls
Heavyweight Hi-Vis Cotton Coverall with 3M™ Tape
Action Back Hi-Vis Cotton Overall with 3M™ Tape
DC2180T1
DC2179T
1
10
Heavyweight fabric offering sturdiness and durability Two tone colour combination 3M™ Scotchlite™ Reflective tape tested to AS/NZS 1906.4:2010 Double hoop tape configuration Heavy duty metal press studs Adjustable cuff for durable comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
1
Heavyweight fabric offering sturdiness and durability Two tone colour combination 3M™ Scotchlite™ Reflective tape tested to AS/NZS 1906.4:2010 Double hoop tape configuration Heavy duty nylon press studs Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
60
10
DC2180T1-Y/N
DC2180T1-O/N
DC2179T-Y/N
77R-117R | 87S-132S | 84L-94L
82R-117R | 92S-132S | 84L-94L
77R-117R | 84L-94L
ACTION BACK
Cotton Drill Coveralls
For work with non-hazardous substances, using an over the top coverall with easy doffing keeps workers' clothes underneath clean and avoids contaminating other areas onsite.
DC2179T-Y/N
61
WOMEN'S
62-69
Shirts 64-67 Trousers
62
68-69
63
Women's Shirts
DSW2166T1-O/N
64
Women's Shirts
Ripstop Vented L/S Hi-Vis Shirt with 3M™ Tape DSW2169T1
1
20
E xtra lightweight ripstop cotton fabric offering comfort and superior durability Horizontal back cooling vents and underarm mesh vents offer comfort in hot and humid conditions Two buttoned pockets, one with pen partition. 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DSW2169T1-Y/N
DSW2169T1-O/N
8-22
8-22
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape DSW2166T1
1
20
L ightweight cotton fabric offering comfort and durability Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Adjustable cuff for fitted comfort Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
AVAILABLE IN
PAGE 95
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DSW2166T1-Y/N
DSW2166T1-O/N
8-22
8-22
Regular Weight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape DSW2112T1
1
20
Regular weight cotton fabric offering comfort and superior durability Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DSW2112T1-Y/N
8-22
65
Women's Shirts
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape DSW1166T1
1
20
Lightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective tape tested to Standard AS/NZS 1906.4:2010 ‘Double hoop’ tape configuration Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DSW1166T1-ORA 6-22
WOMEN'S FIT Traditionally the solution to a womens workwear garment was to provide a mens cut in a smaller size, a fallacy we believe just doesn't cut it. TRu Workwear Women's Range is designed for the female body, with form-fitting shape that will ensure maximum comfort and support while onsite. These garments are more fitted around the chest and waist, providing more flexibility for the wearer and ultimately a safer solution to baggy clothing.
66
Women's Shirts
NSW Rail Lightweight Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape DSW1166T5
NSW RAIL
1
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
Lightweight cotton fabric offering comfort and durability Colour-fast fabric maintaining long-term high-visibility TRuVis Perforated Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘H-front’ tape and ‘X-back’ tape configuration compliant to NSW Rail standards with biomotion sleeve tape configuration to enhance visibility of limbs during movement Horizontal back cooling vents and underarm mesh vents keep you cool in hot and humid conditions Two buttoned pockets, one with pen partition Adjustable cuff for fitted comfort Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DSW1166T5-ORA 8-22
DSW1166T5-SPO 8-22
67
Women's Trousers
DTW1150T-NAV
68
Women's Trousers
AVAILABLE AS TROUSER IN
PAGE 95
Midweight Cotton Trouser
Midweight Cotton Cargo Trouser with 3M™ Tape
DTW1150
1
Durable midweight cotton canvas fabric Two hip pockets and two rear pockets Cargo pockets on both legs Phone and multi-tool pocket Range of sizes for a comfortable waistline fit Wide belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
20
DTW1150T
1 20 Durable midweight cotton canvas fabric 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Two hip pockets and two rear pockets Cargo pockets on both legs Phone and multi-tool pocket Range of sizes for a comfortable waistline fit Wide belt loops Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
DTW1150-NAV
6-24
Performance
Features
Features
Performance
*Class N only applicable when worn with a compliant shirt
DTW1150-GRN
8-22
DTW1150T-NAV
6-24
69
JACKETS
70-89
Fleece
72-75
Softshell & Cotton
76-77
Waterproof 78-85 Rain set
70
86-89
71
Fleece Jackets
TF2955T1-O/N
72
Fleece Jackets
1/4 Zip Fleece Jumper TF2950
1
10
Anti-pill polyester fabric for easy maintenance and long-lasting use Colour-fast fabric maintaining long-term high-visibility Strong nylon zipper Side pockets and dual pen pocket on left hand sleeve Reflective trim around zip
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TF2950-Y/N
TF2950-O/N
XS-5XL
XS-5XL
1/4 Zip Fleece Jumper with TRuVis Reflective Tape TF2950T7
1
10
A nti-pill polyester fabric for easy maintenance and long-lasting use Colour-fast fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’ and double hoop tape configuration for additional visibility Side pockets and dual pen pocket in left hand sleeve Strong nylon zipper Reflective trim around zip
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TF2950T7-Y/N
TF2950T7-O/N
XS-5XL
XS-5XL
1/4 Zip Fleece Jumper with TRuVis Reflective Tape TF2950T4
VIC RAIL
1
10
A nti-pill polyester fabric for easy maintenance and long-lasting use Colour-fast fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’ and double hoop tape configuration for additional visibility Biomotion sleeve tape configuration to enhance visibility of limbs during movement Side pockets and dual pen pocket in left hand sleeve Strong nylon zipper Reflective trim around zip
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TF2950T4-S/N
XS-5XL
73
Fleece Jackets
Full Zip Water Repellent Fleece Jacket with TRuVis Reflective Tape TF2955T1
1
10
Anti-pill polyester fabric for easy maintenance and long-lasting use Colour-fast fabric maintaining long-term high-visibility Teflon® water repellent fabric protector TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Side pockets Full nylon zipper Integration loops for integration with TJ2900T6
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TF2955T1-Y/N
TF2955T1-O/N
XS-5XL
XS-5XL
1/4 Zip Fleece Jumper with TRuVis Reflective Tape TF1950T5
NSW RAIL
1
10
A nti-pill polyester fabric for easy maintenance and long-lasting use Colour-fast fabric maintaining high-visibility standards TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’ and ‘X-back’ compliant to NSW Rail standards Biomotion sleeve tape configuration to enhance visibility of limbs during movement Extra strip of reflective tape on back for visibility when bending down Side pockets and dual pen pocket in left hand sleeve Strong nylon zipper Reflective trim around zip
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TF1950T5-ORA
74
XS-5XL
Fleece Jackets
TF1950T5-ORA
75
Softshell & Cotton Jackets
TJ2960T1-O/N
76
Softshell & Cotton Jackets
Hi-Vis Cotton Canvas Jacket with 3M™ Reflective Tape DJ2192T1
1
10
urable midweight cotton canvas fabric with water repellent finish D Colour-fast fabric maintaining long-term high-visibility 3M™ Scotchlite™ Reflective Tape tested to Standard AS/NZS 1906.4:2010 Hip length with waist pockets Full nylon zip Reflective trim around front and sleeves of garment Sleeves with cuff adjusters for a comfortable fit Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
DJ2192T1-Y/N
DJ2192T1-O/N
XS-5XL
XS-5XL
Softshell Full Zip Jacket with TRuVis Reflective Tape TJ1960T5
NSW RAIL
1
10
9 4% Polyester 6% Spandex fabric with bonded fleece for easy maintenance and long-lasting use Water resistant fabric garment with a water-proof zipper Colour-fast special orange fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘X-Back’ tape configuration for rail compliance Reflective trim around front and sleeves of garment Sleeves with cuff adjusters for a comfortable fit
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ1960T5-ORA
XS-5XL
Softshell Full Zip Jacket with TRuVis Reflective Tape TJ2960T1
1
10
9 4% Polyester 6% Spandex fabric with bonded fleece for easy maintenance and long-lasting use Water resistant fabric garment with a water-proof zipper Colour-fast special orange fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Reflective trim around front and sleeves of garment Sleeves with cuff adjusters for a comfortable fit
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ2960T1-Y/N
XS-5XL
TJ2960T1-O/N
XS-5XL
77
Weatherproof Jackets
TJ2945T4-Y/N
78
Weatherproof Jackets
Wet Weather Reversible Vest with TRuVis Reflective Tape TV1915T5
1
10
Outer- 300D polyester oxford fabric, Inner - 100% polyester fleece Colour-fast fabric maintaining high-visibility standards TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘H-front’ tape configuration, in accordance with safety standards Waterproof and breathable with sealed seams for extra insulation from water Style combines as the vest component for TJ2910T6 Reversible garment with polar fleece fabric interior
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TV1915T5-Y/N
TV1915T5-O/N
XS-5XL
XS-5XL
Pilot Jacket with TRuVis Reflective Tape TJ2946T4
1
10
3 00D polyester oxford fabric offering comfort, flexibility and durability Colour-fast fabric maintaining long-term high-visibility Waterproof garment, and breathable fabric with sealed seams for extra insulation from water Quilt lined with polar fleece lined collar TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’, double hoop and biomotion sleeve tape configuration for enhanced night-time visibility Storm flap over front zip and concealed rain hood in outer jacket collar Concealed hood with draw string for fitted comfort BSI Certified Product Features
Performance
AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ2946T4-Y/N
TJ2946T4-O/N
XS-5XL
XS-5XL
Rain Jacket with TRuVis Reflective Tape TJ2900T6
1
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
3 00D polyester oxford fabric offering comfort, flexibility and durability Colour-fast fabric maintaining long-term high-visibility Waterproof garment, and breathable fabric with sealed seams for extra insulation from water TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration ID pocket on right-hand chest and left-hand flap pocket Storm flap over front zip and concealed rain hood in outer jacket collar Combines as the jacket component of TJ2910T6 and TJ2920T6
10
TJ2900T6-Y/N
XS-5XL
TJ2900T6-O/N
XS-5XL
79
Weatherproof Jackets
Wet Weather Jacket with Removable Sleeves and TRuVis Reflective Tape TJ2945T4
1
300D polyester oxford fabric offering comfort, flexibility and durability Polar fleece lined inner Colour-fast fabric maintaining long-term high-visibility Waterproof garment, and breathable fabric with sealed seams for extra insulation from water TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’, double hoop tape configuration and biomotion sleeve tape configuration to enhance visibility of limbs during movement ID pocket on right-hand chest and left-hand flap pocket Removable zip off sleeves for hotter conditions Storm flap over front zip for extra insulation from water Combines as the inner jacket component of TJ2920T6
10
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ2945T4-Y/N
AVAILABLE IN ORANGE / NAVY TJ2945T4-O/N
XS-5XL
XS-5XL
3 in 1 Jacket with Removable Fleece Inner Vest and TRuVis Reflective Tape TJ1911T5
NSW RAIL
Features
Performance
Outer- 300D polyester oxford fabric, Inner - 100% polyester fleece Heavyweight fabric offering sturdiness and durability Waterproof and breathable with sealed seams for extra insulation TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Biomotion sleeve tape configuration to enhance visibility ‘Over the shoulder’ and ‘X-back’ compliant to NSW Rail standards Hip length with waist pockets Storm flap over front zip and concealed rain hood in collar 3 in 1 jacket with removable fleece vest Velcro adjustable cuffs for a comfortable
TJ1911T5-ORA
80
XS-5XL
1
10
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Weatherproof Jackets
TJ2945T4-Y/N
81
Weatherproof Jackets
4 in 1 Jacket with TRuVis Reflective Tape TJ2910T6
1
Features
Performance
3 00D polyester oxford fabric offering comfort, flexibility and durability Polar fleece lined inner Colour-fast fabric maintaining long-term high-visibility Waterproof garment, and breathable fabric with sealed seams for extra insulation from water TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’ and double hoop tape configurations Storm flap over front zip for extra insulation from water ID pocket on right-hand chest and left-hand flap pocket Inner removable vest Garment combines as the outer jacket of TV1915T5 and TJ2900T6
TJ2910T6-Y/N
82
XS-5XL
TJ2910T6-O/N
XS-5XL
AVAILABLE IN YELLOW / NAVY
10
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Weatherproof Jackets
TJ2910T6-O/N
83
Weatherproof Jackets
TJ2910T6-O/N
84
Weatherproof Jackets
6 in 1 Rain Jacket Combo with TRuVis Reflective Tape TJ2920T6
1
10
3 00D polyester oxford fabric offering comfort, flexibility and durability Polar fleece lined inner Waterproof garment, and breathable fabric with sealed seams for extra insulation from water Colour-fast fabric maintaining long-term high-visibility TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 ‘Over the shoulder’ and double hoop tape configurations Jacket outer TJ2900T6 combines with jacket inner TJ2945T4 suitable for all weather conditions Outer Jacket Concealed hood on garments collar ID pocket on the right-hand chest Inner Jacket Removable inner jacket component Reversible jacket with polar fleece lining ID pocket on right-hand chest Removable zip off sleeves for warmer conditions
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Features
Performance
AVAILABLE IN ORANGE / NAVY
TJ2920T6-Y/N
XS-5XL
TJ2920T6-O/N
XS-5XL
85
Rain Set
86
Rain Set
Rain Set in Bag for Night Work TJ1970T5
1
10
100% polyester 190gsm Taffeta with PVC coating TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Waterproof garment, designed to withstand wet conditions Jacket ‘Over the shoulder,’ ‘X-back’ and double hoop tape configurations Concealed hood with drawcord Back vented jacket with underarm eyelets for optimal ventilation Trouser Biomotion leg tape configuration to enhance visibility of limbs during movement Elasticized waistline with additional drawcord a comfortable fit Side entry access pockets Bottom hem with press stud for adjustment
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ1970T5-WHI
XS-6XL
87
Rain Set
Rain Set in Bag for Day and Night Work TJ1970T9
1
10
100% polyester 190gsm taffeta with PVC coating Colour-fast fabric maintaining high-visibility standards TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Waterproof garment, designed to withstand wet conditions Jacket ‘Over the shoulder,’ ‘X-back’ and double hoop tape configurations Concealed hood with drawcord Back vented jacket with underarm eyelets for optimal ventilation Trouser Biomotion leg tape configuration to enhance visibility of limbs during movement Elasticized waistline with additional drawcord a comfortable fit Side entry access pockets Bottom hem with press stud for adjustment
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
TJ1970T9-YEL
88
S-5XL
TJ1970T9-ORA
S-5XL
Rain Set
VIC Compliant Rain Set in Bag TJ1970T4
VIC RAIL
Wet Weather Pants with Biomotion Tape 1
10
100% polyester 190gsm taffeta with PVC coating Special purpose orange specific for VIC Rail Colour-fast fabric maintaining high-visibility standards TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Garment set tailored for use on VIC Rail sites
TW1996T2
1
10
Polyester Oxford fabric offering comfort, flexibility and durability TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010 Biomotion leg tape configuration to enhance visibility of limbs during movement Side entry access pockets Elasticized waist line with additional drawcord a comfortable fit Bottom hem with press stud and zipper for adjustment Waterproof garment, designed to withstand wet weather
Jacket ‘Over the shoulder,’ ‘H-back’ and double hoop tape configurations Concealed hood with drawcord Back vented jacket with underarm eyelets for optimal ventilation Trouser Biomotion leg tape configuration to enhance visibility of limbs during movement Elasticized waist line with additional drawcord a comfortable fit Side entry access pockets BSI Certified Product Bottom hem with press stud for adjustment AS/NZS 1906.4:2010
TJ1970T4-SPO
XS-7XL
Performance
Features
Features
Performance
AS/NZS 4602.1:2011
TW1996T2-YEL
XS-5XL
TW1996T2-ORA XS-5XL
89
The TRu Workwear Core Series is quintessentially Australian. These are the proven performers. These are designs with a high volume focus and reliable fit and function. They are certified to protect and designed to last. They are tough to the Core.
Conformance to a standard is simply a claim. Certification of products by an independent Notified Body (NB) ensures the product actually meets the claim. This is the TRu Workwear point of difference
90
91
Men's Range
CS2000T3-Y/N
92
Men's Range
Lightweight Vented Hi-Vis Drill Shirt with TRuVis Tape CS2000T3
10
20
Midweight Drill Trouser with TRuVis Reflective Tape CT1080T3
5
Lightweight breathable fabric offers all day wearer comfort
Midweight fabric offering comfort and durability
TRuVis Reflective Tape tested to standard AS/NZS 1906.4:2010
TRuVis Reflective Tape tested to standard AS/NZS 1906.4:2010
Double hoop tape configuration, in accordance with safety standards
9 pocket trouser; two hip pockets, two rear pockets, mobile, coin, and multi-tool pockets, two cargo pockets, one with pen partition
H orizontal back cooling vents and underarm mesh offering comfort in hot and humid conditions
Range of sizes for a comfortable waistline fit
Two buttoned pockets, one with pen partition
Wide belt loops
Adjustable cuff for fitted comfort
Four eyelets at crotch, specific to mens trousers
F abric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Performance
*Compliant when worn with Australian standards Class N or Class D/N upper garment
Features
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
CS2000T3-Y/N S-5XL
CS2000T3-O/N
20
S-5XL
CT1080T3-NAV
77R-112R | 87S - 132S | 79L-94L
93
Women's Range
CSW2000T3-Y/N
94
Women's Range
Lightweight Womens Hi-Vis Shirt with TRuVis Tape CSW2000T3
10 T ailored womens fit designed for comfortable wear, with right over left placket design
20
Midweight Womens Trouser with TRuVis Tape CTW1080T3
5
TRuVis Reflective Tape tested to Standard AS/NZS 1906.4:2010
Lightweight breathable fabric offers all day wearer comfort TRuVis Reflective tape tested to AS/NZS 1906.4:2010
9 pocket trouser; two hip pockets, two rear pockets, mobile, coin, and multi-tool pockets, two cargo pockets, one with pen partition
Double hoop tape configuration, in accordance with safety standards
Right over left placket
H orizontal back cooling vents and underarm mesh offering comfort in hot and humid conditions
Wide belt loops
Two buttoned pockets, one with pen partition
Right over left fly, specific to womens trousers
Adjustable cuff for fitted comfort
Fabric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
Range of sizes for a comfortable waistline fit
8-24
*Compliant when worn with Australian standards Class N or Class D/N upper garment
Features
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011
Performance
F abric controls undesired static electricity in accordance with Standard AS/NZS 1020:1995
CSW2000T3-Y/N
CSW2000T3-O/N
20
Midweight fabric offering comfort and durability
8-24
CTW1080T3-NAV
8-24
95
96
Accessories
Eco-Friendly Bamboo Socks - Single Pack
Eco-Friendly Bamboo Socks - Triple Pack
Superior moisture wicking
Superior moisture wicking
Naturally anti-bacterial
Naturally anti-bacterial
Eco-friendly bamboo
Eco-friendly bamboo
92% Bamboo 8% Elastane
92% Bamboo 8% Elastane Features
TA1030
Features
TA1010
SINGLE PACK
1
10
100
TRIPLE PACK
3
18
108
TA1010-BLK-06-10 TA1010-BLK-10-14
Black - Single Pack Black - Single Pack
Mens 6-10 Mens 10-14
TA1030-BLK-06-10 TA1030-BLK-10-14
Black - Triple Pack Black - Triple Pack
Mens 6-10 Mens 10-14
TA1010-NAV-06-10 TA1010-NAV-10-14
Navy - Single Pack Navy - Single Pack
Mens 6-10 Mens 10-14
TA1030-NAV-06-10 TA1030-NAV-10-14
Navy - Triple Pack Navy - Triple Pack
Mens 6-10 Mens 10-14
CARE INSTRUCTIONS
CARE INSTRUCTIONS
Cold or warm machine wash
Warm tumble dry
Cold or warm machine wash
Warm tumble dry
Line dry inside-out
Do not iron or bleach
Line dry inside-out
Do not iron or bleach
97
98
99
Bool Workwear Technology Precision performance against arc and flash fire protection Australia has relied on Bool Workwear to provide the safest protection against onsite fire hazards. Bool is workwear designed and engineered for some of the most challenging working conditions possible. By harnessing Parvotex® fibre, Bool provides an advanced technological solution to fire protection. Extensive research and development combined with tried and tested experience on Australian sites make Bool FR garments industry trusted. Fire retardant fabric technology is continually developing. By sourcing the toughest materials and engineering the strongest of fibres, Bool relies on its technology to ensure garments exceed safety standards. Bool collaborates and sources from the most trusted partners, complying with and exceeding international standards from ASTM, NFPA, ISO and OEKO TEX®. Bool is the protective armour of choice for withstanding the most intense heat. We continually value the insights of the heroes putting our garments to the test in some of the most extreme working conditions in the country. Our garments are worn onsite at industries spanning rail, petrochemical utilities, power, gardening and heavy industrial electrical environments. Bool Workwear is built to withstand low light sources, strong heat, open arcs, chemicals or static hazards of Australia's most danger-prone sites.
100
What is an Arc Flash? An arc flash is an extreme event occurring when working with high voltage (HV), low voltage (LV) and high currents, for operators of complex electrical systems. The cause of an arc flash event is a fault or short circuit condition, which passes through an arc gap. The result is an abrupt and violent surge of explosive energy. This explosive energy is caused by vaporising metal as it transitions from a solid to plasma. The plasma ejected from the arc can reach and exceed temperatures of over 5000ºC. Debris of vaporised metals in the form of molten rock plummets through the air at speeds exceeding 1120km/hr. Additional to intense heat, an arc flash event can produce deafening sound waves of greater than 140dB with pressure waves greater than 13.7 KPa. The effects of this high pressure may leave an operator with burst eardrums or collapsed lungs. An incident occurs when low impedance electrical connections are made across electrical phases, phase to neutral or phase to earth. Crossing phases can result from accidental contact across terminals from a contact point with tools and equipment. Likewise, a build-up of contaminants such as carbon or dust and a breakdown in installation can cause this event. Operators are at most risk of experiencing an incident when conducting high-risk activities such as racking circuit breakers. Unfortunately, arc flash can occur at any time. It is generally assumed that arc flash only occurs in high voltage situations, but low voltage installations also bring risk due to longer fault clearing times involved in the clearing of high prospective energy level faults. The amount of exposure a person can experience is expressed in terms of incident energy and measured in units of calories/cm2. Arc flash is a potentially fatal hazard that can otherwise result in serious injury. Clothing that is not fire retardant will ignite, leaving the wearer with severe burns, potentially leading to fatality. Thus, any workwear and additional safety equipment must be tested and comply with stringent safety standards.
Flash Fire?
A flash fire, on the other hand, is a sudden, intense fire caused by the ignition of a mixture of air and a dispersed flammable substance such as a solid (including dust), flammable or combustible liquid (such as an aerosol or fine mist), or flammable gas. It is characterised by high temperature, short duration, and a rapidly moving flame front without the production of damaging pressure, which is the key difference between a flash fire and an arc flash.
101
TECHNOLOGY
Parvotex Fabric Parvotex is uncompromised protection against unforeseen open electric arc incidents and flash fire events. No other FR fabric can boast high levels of fire resistance alongside superior comfort and breathability. This all stems from the yarn composition, with our Parvotex fabric boasting a 32% cotton content blended with Kaneka and Kururay Vectran®, the perfect solution for Australia's hot and humid climate.
Inherent Fire Resistance Inherent FR fabric consists of innately flame resistant fibres. Fabrics made from these fibres do not go through the coating processes of a treated FR fabric, which imparts flame resistance to the fabrics otherwise flammable fibres. Inherent fabrics are the opposite of treated fabrics, as their fire-resistant properties lie within the woven fibres that come together to form the fabric. Inherent fabrics will retain their fire-retardant properties for the garments entire useful life. FR properties will not wear or diminish over time, providing washing instructions are adhered to, and contaminants are avoided. Longstanding performance imparts peace of mind to the wearer, as they are assured the garment they purchased on day one, will continue to perform in the same manner throughout its wearable life. The inherent fire retardant properties of our Parvotex fabric stem from the 50% modacrylic content. Modacrylic is a dimensionally stable, soft and resilient fibre that is self-extinguishing and non-combustible, a genuinely remarkable synthetic co-polymer.
Parvotex Breathability With a 32% cotton content, Parvotex fabric offers a more breathable and comfortable alternative to traditionally hot and heavy flame retardant garments. This reduced fabric weight and additional breathability ensure less wearer fatigue, a more consistent body temperature and most importantly, wearer comfort during all-day shifts. This is the reason Parvotex remains a market leader in the flame retardant workwear space.
PARVOTEX FABRIC Parvotex Fabric is free from harmful chemicals achieving certification to Oeko-tex® Standard 100 Product Class II, which is awarded to articles with direct contact to the skin joining the same category as products like underwear, bed linen, T-shirts etc.
Standard 100 by Oeko-Tex® Certified according to annex 4 Product Class: II - 20150K0955 Institute Type of certified article - Woven or knitted fabric made of below materials or part of them: dyed modacrylic, cotton and polyamide, and white polyarylate, and mixtures with white SPS (Sulfonyl Polyphenylene Sulfide), Meta-aramide, Lenzing LyocellTM, or Conductive nylon or polyester dope dyed (white, black or grey), with or without spandex; laminated with PU membranes; with/without water/oil/stain repellent finish. NON-woven fabrics in white made of below materials or part of them: Modacrylic, Cotton, polyamide, polyarylate, Meta-aramide, LENZING™ FR (Flame retardant accepted by OEKO-TEX®), Lyocell, or polyester, with/ without lamination with PU membranes. Produced by using pre-certified material according to STANDARD 100 by OEKO-TEX®.
102
KEY ADVANTAGES OF INHERENT FABRICS Self-extinguishing
Durable
Comfortable
Parvotex is a self-extinguishing fabric and the critical component of any flame retardant garment. By definition, when the ignition source is removed, these fabrics do not catch alight; instead, the flame is extinguished, drastically reducing overall body burns to wearers.
Because the garments flame retardant properties stem from the fibres in the yarn and high-visibility colourfastness is established at this level, they do not diminish over the products long lifespan. The fabric withstands high levels of abrasive activity without tearing or pilling. Bool workwear garments are tested to retain these properties after a series of industrial washing cycles.
Parvotex fabric has a cotton content of 32% and is ultra-comfortable, eliminating and removing the stiffness and heaviness of traditional flame retardant garments. The high cotton content also makes the yarn highly breathable, which is essential in the harsh Australian working conditions.
®
PARVOTEX® FIBRE CONSTRUCTION Modacrylic (50%)
Cotton (32%)
The modacrylic fibre is a synthetic co-polymer. It is soft, strong, resilient and dimensionally stable and is perfect for garment construction being easily dyed, showing good press and shape retention, and quick to dry. Amongst other properties, modacrylic fibres have outstanding resistance to chemicals and solvents, are not attacked by moths or mildew, and are non-allergenic.
Cotton is a soft, fluffy staple fibre that grows in a boll around the seeds of the cotton plants. The fibre is most often spun into yarn or thread and used to make a soft, breathable textile. The addition of cotton in the Parvotex® fibre ensures that Bool garments are perfectly suitable for Australia's harsh hot conditions, being highly breathable and flexible.
Modacrylic is also flame retardant and does not combust, meaning it is difficult to ignite and will self-extinguish - the essential component of Parvotex® yarn.
Carbon (1%) Carbon within the Parvotex® fabric adds anti-static properties, which hinder the build-up of static in the garment. Carbon strength and stiffness with outstanding fatigue properties. Carbon also outperforms against high temperature and chemical inertness.
Polyamide (Kaneka) (9%) Polyamides are synthetics fibres and are characterised by high tensile strength and excellent resistance to wear and impact. They are stable to the action of many chemical reagents and biochemical agents, and they have an affinity to many dyes. Polyamide fibres are highly elastic, have low humidity absorption capabilities, and are fast drying.
Polyarylate (Kururay Vectran) (8%) Polyarylate is five times stronger than steel, a high-performance multi-filament yarn spun from liquid crystal polymer. This fibre gives the garment high strength and additional dimensional stability and offers cut/shear resistance, abrasion resistance, heat resistance, and added electrical insulation.
103
GARMENT TECHNOLOGY
FR ICONOGRAPHY FABRIC TYPES
Parvotex® fabric is engineered for the highest protection against arc flash and flash fire events, with a blend of fibres tested to exceed international FR safety standards.
TAPE TYPES
FR Softshell maintains all the waterresistant and comfortable breathability of its counterparts with the additional benefit of fire-retardant properties.
Loxy® tape composition uses high index retroreflective micro glass beads, a polymer layer and textile backing. Tested and compliant to AS/NZS 1906.4:2010 and other FR standards.
Midweight
Heavyweight
Segmented FR Reflective tape is a premium sewn on reflective tested for compliance to AS/NZS 1906.4:2010 and other relevant FR standards.
GARMENT WEIGHTS Lightweight
Due to its unique fibre construction, Parvotex fabric is among the most lightweight and breathable FR fabrics available. Fire protection does not come at the expense of comfort.
Bool midweight garments are designed for long-term wearer comfort. With the benefits of midweight comfort and the support of thicker construction.
Heavier weight fabrics construct Bool jackets. Sturdy and resistant to abrasion, heavier weight garments will protect and support the wearer.
STANDARDS ASTM
F1959/F1959M TEST METHOD
Standard Test Method for Determining the Arc Rating of Materials for Clothing
ASTM D2863-2013 TEST METHOD
NFPA 2112:2018 Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposure from Fire NFPA 2112 NFPA 70E
NFPA 70E Standard for Electrical Safety in the Workplace
EN 1149-3(5)
104
EN 1149:2008 Protective Clothing with Electrostatic Properties
Pt. 3:2004 Pt. 5:2008
EN ISO 11612:2015 Clothing to Protect Against Heat & Flame EN 11612
ASTM D2863-2013 Oxygen Index
Standard 100 Class II
OEKO-TEX Standard 100 Tested for Harmful Substances
IEC 61482 Live Working Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against IEC 61482-1-2 Fire Simulations Using an Instrumented Manikin 2014
105
PPE1 Shirts
BW2500T1-O/N
106
PPE1 Shirts
Lightweight PPE1 FR Shirt with Loxy™ Reflective Tape BW1500T1
EXTENDED SIZES
1
20
Extra lightweight garment providing PPE1 (5.9 cal/cm2) protection at only 155gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 Double hoop tape configuration to enhance visibility Two front pockets, one with pen partition Concealed nylon studs BSI Certified Product Two-way radio loops on garment shoulders AS/NZS 1906.4:2010
BW1500T1-ORA
XS-5XL
ASTM
cal/cm2
D2863-2013 NFPA 2112 NFPA 70E
PPE1 (HRC1)
EN 11612
A1 A2 C1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
HRC1
Features
Performance
AS/NZS 4602.1:2011 ASTM F1959/F1959M
ATPV
TEST METHOD
LOI 35.3%
Certified
ASTM F1959/F1959M NFPA 70E:2015
Lightweight PPE1 FR Shirt with Loxy™ Reflective Tape NSW RAIL
BW1500T5
EXTENDED SIZES
1
20
E xtra lightweight garment providing PPE1 (5.9 cal/cm ) protection at only 155gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 X-back, H-front and biomotion sleeve tape to enhance visibility of limbs Garment meets all NSW Rail performance requirements Two front pockets, one with pen partition Concealed nylon studs BSI Certified Product Two-way radio loops on garment shoulders AS/NZS 1906.4:2010 2
BW1500T5-ORA
XS-5XL
ASTM
cal/cm2
D2863-2013 NFPA 2112 NFPA 70E
PPE1 (HRC1)
EN 11612
A1 A2 C1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
ATPV
TEST METHOD
LOI 35.3%
HRC1
Features
Performance
AS/NZS 4602.1:2011 ASTM F1959/F1959M
Certified
ASTM F1959/F1959M NFPA 70E:2015
107
HRC1
PPE1 Shirts
cal/cm2
ATPV
ASTM F1959/F1959M NFPA 70E:2015
Lightweight PPE1 Two Tone FR Shirt with Loxy™ Reflective Tape BW2500T1
1
20
E xtra lightweight garment providing PPE1 (5.9 cal/cm2) protection at only 155gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering added breathability Loxy™ FR 9801 Silver Reflective Tape tested to Standard AS/NZS 1906.4:2010 Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Double hoop tape configuration to enhance visibility Two front pockets, one with pen partition Concealed nylon studs BSI Certified Product Two-way radio loops on garment shoulders
Features
Performance
AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
BW2500T1-Y/N
XS-5XL
BW2500T1-O/N
S-5XL
ASTM D2863-2013 NFPA 2112 NFPA 70E
EN 11612
PPE1 (HRC1)
A1 A2 C1
108
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
TEST METHOD
LOI 35.3%
Certified
PPE1 Shirts
BW2500T1-O/N
109
PPE2 Shirts
Regular Weight PPE2 FR Shirt with Loxy™ Reflective Tape BW1590T1
1
20
Regular weight garment providing PPE2 (8.6 cal/cm2) protection at 197gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Loxy™ FR 9801 Silver Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration to enhance visibility Two front pockets, one with pen partition Concealed nylon studs Two-way radio loops on garment shoulders
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
S-5XL
NFPA 2112 NFPA 70E
EN 11612
cal/cm2
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
ATPV
TEST METHOD
LOI 29.6%
Certified
HRC2
ASTM D2863-2013
PPE2
BW1590T1-ORA
ASTM F1959/F1959M NFPA 70E:2015
Regular Weight PPE2 FR Shirt with Segmented Loxy™ Reflective Tape NSW RAIL
BW1590T5
1
20
Regular weight garment providing PPE2 (8.6 cal/cm2) protection at 197gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Segmented FR Silver Reflective Tape tested to Standard AS/NZS 1906.4:2010 X-back, H-front and biomotion sleeve tape to enhance visibility of limbs Two front pockets, one with pen partition Concealed nylon studs Two-way radio loops on garment shoulders
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
S-5XL
cal/cm2
NFPA 2112 NFPA 70E
EN 11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
110
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
ATPV
TEST METHOD
LOI 29.6%
Certified
ASTM F1959/F1959M NFPA 70E:2015
HRC2
ASTM D2863-2013
PPE2
BW1590T5-ORA
PPE2 Shirts
BW2590T1-O/N
Regular Weight PPE2 Two Tone FR Shirt with Loxy™ Reflective Tape BW2590T1
1
20
Regular weight garment providing PPE2 (8.6 cal/cm ) protection at 197gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Strong reinforced ripstop Parvotex™ fabric which is durable and resistant to tearing Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 Double hoop tape configuration to enhance visibility Two front pockets, one with pen partition Concealed nylon studs Two-way radio loops on garment shoulders 2
S-5XL
BW2590T1-O/N
S-5XL
ASTM
cal/cm2
D2863-2013 NFPA 2112 NFPA 70E
EN 11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
ATPV
TEST METHOD
LOI 29.6%
Certified
HRC2
BW2590T1-Y/N
PPE2
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
ASTM F1959/F1959M NFPA 70E:2015
111
PPE2 Trousers
BW1550T-NAV
112
ATPV
HRC2
cal/cm2
PPE2
PPE2 Trousers
ASTM F1959/F1959M NFPA 70E:2015
Regular Weight PP2 FR Trousers with Loxy™ Reflective Tape BW1550T
1
20
R egular weight garment providing PPE2 (8.6 cal/cm2) protection at 197gsm Parvotex™ FR inherent fabric, with a blend of 32% cotton offering breathability and FR protection Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 Range of sizes for a comfortable waistline fit Integrated belt loops
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
Features
Performance
*Class N only applicable when worn with a compliant shirt
BW1550T-NAV
72R-117R | 82S-132S | 84L-94L
ASTM D2863-2013 NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
TEST METHOD
LOI 29.6%
Certified
113
ATPV
ASTM F1959/F1959M NFPA 70E:2015
BW1560T
Regular Weight PP2 FR Cargo Trousers with Biomotion Loxy™ Reflective Tape 1
20
Regular weight garment providing PPE2 (8.6 cal/cm ) protection at 197gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 Two hip pockets and two rear pockets Range of sizes for a comfortable waistline fit Integrated belt loops 2
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
EN11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
114
1
Pt. 3:2004 Pt. 5:2008
Regular weight garment providing PPE2 (8.6 cal/cm ) protection at 197gsm P arvotex™ FR inherent fabric, with a blend of 32% cotton offering breathability and FR protection Loxy™ FR 9801 Silver Reflective Tape tested to standard AS/NZS 1906.4:2010 Biomotion tape configuration to enhance visibility of limbs 6 pockets pants; two hip, two rear and two side press stud cargo pockets Range of sizes for a comfortable waistline fit Wide belt loops
Charge Decay
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
*Class N only applicable when worn with a compliant shirt
72R-117R | 82S-132S | 84L-94L
ASTM
ASTM
D2863-2013
D2863-2013
TEST METHOD
LOI 29.6%
Certified
20
2
BW1560T2-NAV
72R-117R | 82S-132S | 84L-94L
Class 1
BW1560T2
Features
Features
Performance
*Class N only applicable when worn with a compliant shirt
NFPA 2112 NFPA 70E
HRC2
ASTM F1959/F1959M NFPA 70E:2015
Regular Weight PP2 FR Cargo Trousers with Loxy™ Reflective Tape
BW1560T-NAV
PPE2
cal/cm2
Performance
ATPV
HRC2
cal/cm2
PPE2
PPE2 Trousers
NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
TEST METHOD
LOI 29.6%
Certified
PPE2 Trousers
BW1560T-NAV
115
ATPV
HRC2
cal/cm2
PPE2
PPE2 Coveralls
ASTM F1959/F1959M NFPA 70E:2015
Regular Weight PPE2 Two Tone Coverall with Loxy™ Reflective Tape BW2570T1
1
10
Regular weight garment providing PPE2 (8.6 cal/cm ) protection at 197gsm P arvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Loxy™ FR 9801 Silver Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration to enhance visibility Garment components and construction compliant to FR standards Two front pockets, one with pen partition Concealed nylon studs with two way zipper BSI Certified Product AS/NZS 1906.4:2010 Two-way radio loops on garment shoulders AS/NZS 4602.1:2011 2
Features
Performance
ASTM F1959/F1959M
BW2570T1-Y/N
77R-117R | 87S-132S
ASTM D2863-2013
116
NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
TEST METHOD
LOI 29.6%
Certified
ATPV
HRC2
cal/cm2
PPE2
PPE2 Coveralls
ASTM F1959/F1959M NFPA 70E:2015
Regular Weight PPE2 Coverall with Loxy™ Reflective Tape BW1570T1
1
10
R egular weight garment providing PPE2 (8.6 cal/cm ) protection at 197gsm Parvotex™ inherent FR fabric, with a blend of 32% cotton offering breathability and FR protection Loxy™ FR 9801 Silver Reflective Tape tested to Standard AS/NZS 1906.4:2010 Double hoop tape configuration to enhance visibility Garment components and construction compliant to FR standards Two front pockets, one with pen partition Concealed nylon studs with two way zipper BSI Certified Product AS/NZS 1906.4:2010 Two-way radio loops on garment shoulders AS/NZS 4602.1:2011 2
Features
Performance
ASTM F1959/F1959M
BW1570T1-ORA
77R-117R | 92S-132S
ASTM D2863-2013 NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 A2 B1 C1 F1
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
TEST METHOD
LOI 29.6%
Certified
117
FR Jackets
BW2300T8-Y/N
118
cal/cm2
ATPV
HRC2
17.4
PPE2
FR Jackets
ASTM F1959/F1959M NFPA 70E:2015
Hi-Vis FR Softshell Jacket with Segmented FR Tape BW1300T5
EXTENDED SIZES
1
10
360gsm Softshell garment providing PPE2 protection 3-layer softshell: FR Inherent poly shell fabric and breathable FR PU Inherent FR fleece and flame retardant thread used in seams Segmented FR heat applied reflective-tape 'H-front' and 'X-back' jacket tape configuration for optimal visibility Biomotion sleeve tape configuration to enhance visibility of limbs during movement Insulated garment providing production against cold conditions Nomex FR zippers Radio loop on right-hand side chest
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
BW1300T5-ORA
NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 B1 C2 D1 E1 F2
XS-6XL
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
Certified
119
cal/cm2
ATPV
HRC2
17.4
PPE2
FR Jackets
ASTM F1959/F1959M NFPA 70E:2015
Hi-Vis FR Softshell Jacket with Segmented FR Tape BW2300T8
1
20
360gsm 3-layer softshell combining poly shell fabric and breathable FR PU 3-layer softshell: FR Inherent poly shell fabric and breathable FR PU Inherent FR fleece and flame retardant thread used in seams Segmented FR heat applied reflective-tape ‘H- front’ and 'H-back' jacket tape configuration for optimal visibility Biomotion sleeve tape configuration to enhance visibility of limbs during movement Insulated garment providing production against cold conditions Nomex FR zippers Radio loop on right-hand side chest
Features
Performance
BSI Certified Product AS/NZS 1906.4:2010 AS/NZS 4602.1:2011 ASTM F1959/F1959M
BW2300T8-Y/N
NFPA 2112 NFPA 70E
EN11612
PPE2 (HRC2)
A1 B1 C2 D1 E1 F2
S-5XL
BW2300T8-O/N
S-5XL
Pt. 3:2004 Pt. 5:2008
Class 1
Charge Decay
Certified
BW2300T8-Y/N
120
FR Jackets
121
122
STANDARDS
123
ELECTRICAL WORK - PPE
NFPA 70E Standard for Electrical Safety in the Workplace (2018) Australia has adopted the US Standard for arc rated protection NFPA 70E. This standard was developed in conjunction with US federal agency, Occupational Safety and Health Administration (OSHA), by the Standards Council of the National Fire Protection Association (NFPA). It has since been incorporated by Australian safety organisations such as the Australian Energy Council into arc flash guidelines for Australian sites. The NFPA 70E standard is divided into sections covering safety-related work practices, maintenance requirements, special equipment and installation requirements. Within these sections are tools for meeting NFPA benchmark requirements, including assessment methods, guidelines and work permits, each stipulating precautionary practices that require implementation when working around industrial electrical equipment. Perhaps most importantly, NFPA 70E specifies the required levels of arc rated protection needed for PPE when performing tasks with estimated incident energy exposures.
RISK ASSESSMENT The NFPA 70E outlines the procedures of crucial risk assessments conducted for personnel working around or directly on live parts of energised electrical equipment. Among the risk assessments outlined in NFPA 70E are the 'Arc flash risk assessment' and a 'Shock risk assessment'. Assessments should be undertaken when any modifications or renovations are made to the environment and at intervals that don't exceed five years. An assessment must take into account the design of the energised device, its machine requirements and any changes made or that are planned to be made to the power source configuration or transformer size. The arc flash risk assessment will determine the Workplace Health and Safety (WHS) response to the presence of an arc flash hazard. An 'Incident Energy Analysis' will determine the arc flash boundary, safety-related work practices, and the necessary PPE to be worn around certain distances from the energised object. During this analysis, the incident energy is calculated and used as a critical component of an arc flash risk assessment.
INCIDENT ENERGY ANALYSIS METHOD Incident energy (also referred to as heat flux) is the amount of energy that reaches an individual or surface at a distance from an arc during an arc fault. It is measured and expressed in calories/cm2 (or joules/cm2). Generally, the factors contributing to high incident energy are; higher fault current, longer protection clearing time and shorter distances from the arc. The onset of second-degree burns is likely to occur at an exposure of 1.2 cal/cm2 (5 J/cm2) of fault incident energies for one second, a significant threshold for arc fault management. The incident energy is calculated and used as a critical component of an arc flash risk assessment. The method outlined in NFPA 70E Annex D is the 'Incident energy and arc flash boundary calculation method'. This method predicts the incident energy of an arc flash for a specified set of conditions. These conditions and factors include the voltage, duration of the arc (cycles), nature of the enclosure and distance from the arc to personnel operating. The incident energy exposure level is devised from the distance of the workers face and chest areas, from the arc-source where work is being performed. When calculating the incident energy, the nature of the tool and its assumed properties are considered. Further considerations include whether calculations were made for 'open air' or 'arc in a box', single or multi-phase, voltage limitations and type of equipment/protection.
BOUNDARIES Another contributing factor to the assignment of appropriate PPE is the 'Arc flash boundary'. These boundaries are drawn around energised equipment and define what PPE should be worn within certain boundaries. The boundaries are set based on the amount of incident energy the worker would be exposed to during a potential arc flash, determining the level of PPE recommended. Arc flash incident energy calculation method is used to determine the appropriate boundaries around energised equipment. Specific voltage ranges stipulate the area of which 'restricted' approach boundary ends and the 'limited' approach boundary begins. Limited: a qualified person must always be present supervising any personnel entering this boundary area. Restricted approach boundaries: no qualified personnel shall approach this area or take an conductive object closer to the exposed energized electrical area.
124
PERSONAL PROTECTIVE EQUIPMENT (PPE) CATEGORIES Hazard Risk Category (HRC) system was removed as of the 2015 versions of the NFPA 70E standard. Arc rated protection was classified with a rating from 1 to 3. The HRC has since been replaced with the 'Incident energy analysis method' or the Arc Flash PPE Category Method 130.7(c) (15). This revision was made to specify the recommendations for PPE used when working within the arc flash boundary. PPE Categories are defined by the garment's arc rating. The arc rating of a garment is determined using standardised test methods, most commonly ASTM F1959/ F1959M. The arc rating represents the level of incident energy a garments' fabric can withstand before the wearer may develop second-degree burns (see ASTM F1959/F1959M). It is recommended in Australia that the PPE category method is used in lieu of an incident energy analysis, as stated in the Australian Energy Council's Electrical Arc Flash Hazard Management Guideline. Nonetheless, the two work in unison and an incident energy analysis result are transferred easily to a PPE category. The assessments form a system that aids safety officers and workers in selecting the
PPE CATEGORY 1 (PPE1) MINIMUM 4 CAL/CM2
PPE CATEGORY 2 (PPE2) MINIMUM 8 CAL/CM2
PPE CATEGORY 3 (PPE 3) MINIMUM 25 CAL/CM2
PPE CATEGORY 4 (PPE 4) MINIMUM 40 CAL/CM2
appropriate PPE for tasks that involve an arc flash risk. Each category has a minimum arc rating that the garment must meet, as measured in cal/cm2. Other PPE requirements accompany these: PPE Category 0
Arc Rating Arc rating not required (Non-melting or untreated natural fibre specified)
1
< 4 cal/cm2
2
< 8 cal/cm2
3
< 25 cal/cm2
4
< 40 cal/cm2
Minimum arc rating of 4 cal/cm² A rc rated long-sleeve shirt and pants or arc rated coverall Arc rated face-shield or arc flash suit hood Arc rated jacket, parka rainwear or hard hat liner
Hard hat Safety glasses or safety goggles Hearing protection (ear canal inserts) Heavy duty leather gloves Leather footwear
Minimum arc rating of 8 cal/cm² A rc rated long-sleeve shirt and pants or arc rated coverall Arc rated flash suit hood or arc rated face shield and arc rated balaclava Arc rated jacket, parka rainwear or hard hat liner
Hard hat Safety glasses or safety goggles Hearing protection (ear canal inserts) Heavy duty leather gloves Leather footwear
Minimum arc rating of 25 cal/cm² Arc rated long-sleeve shirt Arc rated pants Arc rated coverall Arc rated arc flash suit jacket and hood Arc rated gloves Arc rated jacket, parka rainwear or hard hat liner
Hard hat Safety glasses or safety goggles Hearing protection (ear canal inserts) Leather footwear
Minimum arc rating of 40 cal/cm² Arc rated long-sleeve shirt Arc rated pants Arc rated coverall Arc rated arc flash suit jacket Arc rated arc flash suit pants Arc rated gloves Arc rated jacket, parka rainwear or hard hat liner
Hard hat Safety glasses or safety goggles Hearing protection (ear canal inserts) Leather footwear
125
ARC FLASH RATING
ASTM F1959/F1959M Test Method for Determining the Arc Rating of Materials for Clothing ASTM F1959/F1959M is an internationally recognised test method for determining an 'arc rating' or 'Arc Thermal Performance Value' (ATPV) of a material, or combination of materials, intended to construct a flame-resistant garment. The results from the ASTM F1959/F1959M test method will detail the fabric samples material proprieties when exposed to convective and radiant energy generated by an electric arc.
The ASTM F1959/F1959M test method takes a fabric sample, placing it vertically while remaining flat with no other movements. The sample is exposed to convective and radiant energy generated by an electric arc. A heat-sensitive sensor is set to specified exposure conditions. These conditions may produce different results. Additionally, the test sample may be tested to other conditions representative of expected onsite hazards. If these tests are conducted they will be recorded on the products test report, detailing the performance results.
less than 150mm (6 inches) char length burn for less than 2 seconds after flame is extinguished when tested in accordance with test method D6413 Method for Flame Resistance of Textiles The results of this test method produce an arc rating either expressed as an Arc Thermal Performance Value (ATPV) or Energy Breakopen Threshold (EBT) or both. Which test method used will be indicated in brackets next to arc rating indication, e.g. arc rating (ATPV) = X cal/cm2. Both ratings can appear on the report, but only the lowest value is accepted as the arc rating, according to ASTM F1506 specifications.
For the material to be tested using the ASTM F1959/F1959M test method, it must: be intended to be worn as protective workwear against arc flash
ARC RATING (ATPV) X CAL/CM2
ARC RATING (EBT) X CAL/CM2
HEAT ATTENUATION FACTOR (HAF) 126
The Arc Thermal Performance Value (ATPV) is an arc rating and is expressed in kW.s/m2 or cal/cm2. An ATPV value is an important indication of a fabrics ability to protect an individual from a second-degree burn due to incident energy from an arc flash event. The ATPV records the point at which there is a 50% chance of heat transferring through the garment's fabric, reaching the temperature required for the onset of second-degree burns (based on the Stoll Curve). The fabric must not break open before reaching this threshold.
Instead of reaching the threshold of onset second-degree burns with the fabric intact, particular test fabrics will develop breakopens or holes. A breakopen is defined by an open area of at least 1.6 cm2 (0.5 in2). If the test fabric is recorded as Energy Breakopen Threshold (EBT), the fabric breaks open before the wearer begins to develop second-degree burns. Therefore, arc rated fabrics with an ATPV value will allow burns before the fabric will break open.
Furthermore, the test method is used to determine a Heat Attenuation Factor (HAF), the percentage of total heat blocked by the fabric from reaching the sensor. In electric arc fault testing, this is the percentage of incident energy that is blocked by a material at an incident energy level equal to the ATPV. The test method is limited to electric arc flash that would generate incident energy or heat flux rates from 84 to 3,505 kW/m2 [2 to 600 cal/cm2]. The test is not used to assess non-flame resistant materials. However, layers of a multilayered flame resistant fabric sample can be tested using this standard. The method also excludes electrical contact or electrical shock hazards.
ELECTRIC ARC
IEC 61482 Protective Clothing Against the Thermal Hazards of an Electric Arc The International Electrotechnical Commission (IEC) released IEC 61482, a standard that provides performance requirements and regulates test methods for protective clothing against thermal hazards of an electric arc. This standard is of paramount importance to all arc flash PPE. The first section of the standard is separated into two parts, each outlining a test that provides different garments properties. A garment can be tested to both test methods. Which standard the garment is tested to is indicated by the standards section number as listed below: EN 61482-1-1 Open Arc Test Method EN 61482-1-2 Box Test Method
EN 61482-1-1 OPEN ARC TEST
The Open Arc test method is used to determine the arc rating of an FR fabric. The arc rating is expressed as either Arc Thermal Performance Value (ATPV) or Energy Breakopen Threshold (EBT50) in cal/cm2 (calories of heat energy per square centimetre). It is an alternative test to ASTM F1959/F1959M for calculating an arc rating. The Stoll Curve monitors heat and energy transfer rate alongside the rate observed when the garment fabric is used as protection. The result enables a prediction of the point at which the wearer would feel pain, as supported by the Stoll curve. As of the 2018 version of this standard, garments are also tested and given an Energy Limit Value (ELIM) which complements the ATPV and EBT values for Open arc test. Instead of calculating the incident energy, the garment can withstand before a 50% chance of an onset second-degree burn (like the ATPV test of ASTM F1959/F1959M); EN61482-1-1 calculates the energy level of exposure reached for a 0% probability of second-degree burns. For this reason, ELIM is a more conservative estimation.
EN 61482-1-2 BOX TEST
EN 61482-1-2, also referred to as the 'Box test' method, is conducted using a plaster box that focuses a short arc toward a rectangular-shaped test sample of the FR fabric placed in a flat configuration. A quantitative measurement is made by means of the energy transmitted through the material. The standard specifications for this setup is a voltage of 400V, Duration 500ms and a frequency: 50 Hz or 60Hz. Garments are tested to either class 1 or class 2 or both. Electric arc intensity is stipulated as follows: Arc Protection Classes
Arc Rating
Class 1
Protection against electric arc 4kA (168kJ)
Class 2
Protection against electric arc 7kA (320kJ)
The EN 61482-1-2 gives a pass or fail result. To pass this test the garment must: Show no evidence of melting through the inner side Afterflame less than or equal to 5 seconds No hole larger than 5mm in any direction All 8 value pairs in testing must be below the Stoll curve Dependant on the results, the garment will receive either a pass or fail if it has reached or exceeded the Arc protection class rating class benchmarks.
127
AGAINST HEAT & FLAME
EN ISO 11612:2015 Clothing to Protect Against Heat & Flame EN ISO 11612:2015 outlines the test methods that lay the minimum performance requirements for protective workwear constructed from flexible materials, intended to protect the wearer's body (excluding hands) from heat and flame. The standard applies to protective clothing claiming to protect while conducting industry applications, which pose risk of radiant heat, convective or contact heat or exposure to splatters of molten metal (aluminium or iron). This standard replaces EN 531 which has been formally withdrawn by European Standards. However, the pictogram has remained the same.
EN 11612
EN ISO 11612:2015 lists and categorizes safety hazards that are the result of heat and flame risks. With each of these hazard categories, three performance levels denote if exposure to low, medium or high risks can be withstood. For radiant heat, there is a fourth level which considers protection against extreme exposure to heat from high-performance materials such as aluminised materials.
LETTER A LIMITED FLAME SPREAD
The two tests conducted for letter A - A1 and A2 - are performed following EN ISO 15025:2016 Protective Clothing - Protection against flame - Method of test for limited flame spread. These test methods dictate procedures for determining flame spread as a result of surface or bottom-edge ignition. It measures the effects of the sample fabric on heat exposure against specified set tolerances.
A1- SURFACE IGNITION Surface ignition is tested by applying the flame horizontally and measuring flame spread. For fabrics to meet A1 requirements, they must demonstrate a mean afterflame and afterglow time of less than two seconds. The fabric sample must not generate flaming or molten debris. Additionally, there should be no hole formation of greater than 5mm evident on the sample, excluding inner-lining specifically for other forms of protection.
A2- EDGE IGNITION Edge ignition tests are conducted by applying the flame laterally to the fabric sample. Likewise, the sample must not create flaming or molten debris and must demonstrate a mean afterflame and afterglow time of less than two seconds. The flame must not reach upper or vertical edges.
LETTER B CONVECTIVE HEAT
128
A garments outer surface that does not ignite can still cause the wearer damage through the heat that forms when the wearer comes in contact with the flame. A convective heat test, conducted in accordance with EN ISO 9151:2016, measures the heat that passes through the garment when in contact with flame. The fabric is exposed to a flame. The time it takes for the topside of the sample to reach 24°C is measured with a calorimeter and used to assign a number value.
Performance Rating
Seconds
A1
Pass
A0
Fail
Performance Rating
Seconds
A2
Pass
A0
Fail
Performance Rating
Seconds
B1
4 - 10s
B2
10 - 20s
B3
21s and longer
LETTER C RADIANT HEAT
LETTER D MOLTEN ALUMINIUM SPLASH
LETTER E MOLTEN IRON SPLASH
LETTER F CONTACT HEAT
Radiant heat can put a wearer at risk of injury even at a low temperature if exposed over long periods. Testing garments to EN ISO 6942:2002 involves two complementary methods of determining how the material of a garment will behave when subjected to heat radiation. During the test, a fabric sample is exposed to radiant heat or infrared rays, while the temperature of the materials unexposed side is measured using a calorimeter. Similar to the convective heat test, the duration for the fabric taken to reach 24°C is recorded, and the results translated into a 1-4 performance rating.
The heat penetration resistance of a fabric intended to protect the wearer from large splashes of molten metals is measured and judged using the test method EN ISO 9185:2007. Within this standard, performance levels are set in terms of the mass of iron and aluminium that can be splashed onto a test sample without producing damage to the heat sensor film. To achieve a D level performance rating, the garment must prevent the wearer from coming into contact with molten aluminium splashes of a minimum weight of 100 grams.
Molten Iron is also classified amongst the wide range of hot molten metals that can potentially penetrate clothing, as tested using the EN ISO 9185:2007 test method. The amount of molten iron the garment fabric can protect against is given a performance level from 1-3.
The fabrics protection against direct contact with hot substances or hot surfaces is determined using ISO 12127:1996. The test observes the heat transferred between a heated cylinder and the fabric sample when brought close together. An extensive range of potential conditions and hazards can arise with exposure to high contact heat. However, the test method indicates how well the fabric sample will protect the wearer from contact temperatures within 100°C and 500°C.
Performance Rating
Seconds
C1
7 - 20s
C2
20 - 50s
C3
50 - 95s
C4
95s and longer
Performance Rating
Grams
D1
100 - 200g
D2
200 - 350g
D3
300g or more
Performance Rating
Grams
E1
60 - 120g
E2
120 - 200g
E3
200g or more
Performance Rating
Seconds
F1
5 - 10s
F2
10 - 15s
F3
15s or longer
ISO 11612:2015 excludes head, hands and feet protection, only referencing gaiters, hoods and overboots. There is no reference to gloves or requirements for visors and respiratory equipment for wear alongside hooded garments for adequate fire protection. Additionally, an optional manikin flame engulfment test outlined in ISO 13506-1 or ISO 13506-2 could be conducted, with a minimum expected result of 4 seconds exposure.
129
AGAINST FLASH FIRE
NFPA 2112:2018 Flame-Resistant Garments for Protection of Industrial Personnel Against Short-Duration Thermal Exposure from Fire NFPA 2112:2018 is a US standard developed by the National Fire Protection Agency (NFPA) that lays minimum requirements for the design, construction, evaluation, testing requirements and certification of an FR garment. It addresses both the garment as a whole and its components, including the garment's fabric. Compliance with this standard assures industrial personal that the fire-retardant garment will protect the wearer against unexpected flash fire events.
NFPA 2112:2018 aims to provide a specified level of protection that will reduce the severity of burn injuries. The performance requirements are applied to flameresistant garments not limited to jackets and coveralls but also flame retardant garments shrouds/hoods/balaclavas and gloves. A garment that complies with NFPA 2112:2018 has met all specific benchmarks and levels, as stipulated by the NFPA to be necessary for an FR garment. The 2018 updates of this standard refer to flash fire as short-duration thermal exposure from fire, the term including vapour cloud fires, jet flames, liquid fires, solids fires, and warehouse fires.
ASTM F1930
THE OVEN TEST
For a garment to comply with NFPA 2112:2018, the 'Manikin test' or ASTM F1930:2018 must be conducted using the garments fabric. The results from the manikin test must meet the benchmark stipulated by the NFPA. For the garment's fabric to pass, the material must withstand three seconds of propane fire with at least 50% or less damage to the manikin's surface. Three seconds is the upper limit of the duration of a flash fire. The percentage from the average of three replications of test exposure represents the body burn. The body burn average will indicate either a pass or fail, dependent on whether it meets the NFPA 2112:2018 50% body burn benchmark.
The garments fabric, as well as its zippers or reflective tape, are placed in an oven. During this time, the fabric must exhibit no melting, dripping, separation or ignition for an oven exposure of five minutes at 500°F (260°C).
ASTM D6413 ASTM D6413, commonly referred to as the 'Vertical flame' test, is a significant standard used to prove a fabric is flame-resistant. A rectangular strip of test fabric is placed vertically in an enclosed chamber. A flame is placed underneath the strip. The strip is exposed for 12 seconds. From the fabric test strip, two factors are measured; A fterflame: the duration of time the strip continues to burn after the 12-second mark when the flame is shut off Char length: the break in the fabric due to charing or blackening of the fabric's surface Specific standards stipulate different times and lengths for these factors NFPA 2112:2018 stipulates: a maximum of 2 seconds afterflame a maximum of 4 inches (10.16cm) of char length The test is repeated five times to develop a char length average. This is a pass/fail criteria for NFPA 2112:2018.
130
LABELLING NFPA 2112:2018 outlines strict labelling instructions. On the label of compliant garments, the mark of a third-party certifier must be clearly visible. Alongside this mark, must be the following text: This Flame Resistant Garment meets the requirements of NFPA 2112, Standard for Flame Resistant garments for protection of Industrial Personnel against shortduration Thermal Exposure from fire. NOTE: slight differences in the wording of this phrase may indicate the garments non-compliance.
FIRE PROTECTION
ASTM F1930 Standard Test Method for Evaluation of Flame-Resistant Clothing for Protection Against Fire Simulations Using an Instrumented Manikin Test method used to measure flame resistance of a material, garment or clothing ensemble/systems when exposed to a specified fire. This test method is commonly referred to as the 'manikin test'. It is important to note that the ASTM F1930 standard outlines a test method and does not include benchmarks or performance requirements. These can be found within other standards. Instead, the aim is to ensure results from different testing laboratories are comparable.
The ASTM F1930 test method predicts the potential human skin burn injury possible for a single-layered garment or clothing ensemble. The test is conducted under laboratory conditions, with a manikin wearing the garment or clothing ensemble. Layered shirt combinations could also be tested using this method. The measurements gathered using the ASTM F1930 test method can only apply to the specific sample tested for the heat flux, flame distribution and duration specifications set during the test. Standards that refer to and use this test method stipulate these specifications and benchmark results. Standards to refer to and incorporate the ASTM F1930 include NFPA 2733 Standard Specifications for Flame-Resistant Rainwear for Protection Against Flame Hazards and NFPA 2112:2018 Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short Duration Thermal Exposures for Fire. Therefore, when the ASTM F1930:2018 test is conducted, it is done using the specifications outlined within the above standards. To perform the ASTM F1930 test method, a manikin, propane burners and a coverall constructed out of the test fabric is required. To simulate a flash fire eight propane burners surround the manikin at approximately equal distances. The test manikin is installed with over 100 thermocouples or heat sensors distributed uniformly around its surface. During the simulation flash fire exposure, these thermocouples will measure the depth or intensity of the heat that travels through the fabric.
A calculation is made to predict the extent, severity and location of second and third-degree body burns; the result a percentage. This percentage represents the area of the body that would burn if an arc flash event of such conditions occurred. It is commonly referred to as the 'body burn percentage' and is visualised as a body burn silhouette, seen below. A body burn percentage of 50% or less is required for compliance to NFPA 2112:2016. ASTM F1930 test reports may also include a record of optical and physical changes to the test samples. This information aids in the overall understanding of the garment's performance in protecting the human skin from burn injuries. These observations indicate the properties of the garment. For example, the absence of char from the inner garments may indicate the test garments ability to provide insulation from the flash fire hazard. This example would otherwise be evident in a low body burn percentage, where other observations may not. Other observations include: Afterflame: the garment supports combustion with the presence of flames after the flash fire blast Garment degradation: broken or busted seams Carbonization: occurs when the garment is orange peeled, sometimes, the garment also gets darker Shrinkage: Some garments may acquire vertical and/or radial shrinkage Dye sublimation: where the garment has changed colour from blue dyes to pink
The manikin is wearing a coverall constructed out of the test fabric. The testing fabric is to be sewn using the coverall pattern dictated by the ASTM F1930 standard. Some standards like NFPA 2112:2018 stipulate this is to be a pattern for a size 42 regular. Underneath the coverall is a 100% cotton T-shirt and briefs. Char marks on these inner garments will be examined and noted to assist in evaluating the body burn average.
FRONT
Upon completing a simulation, the data from the thermocouples and physical assessment from the flash fire simulation are analysed alongside the theoretical skin burn model. This model is derived from predictions made using data from experiments in which human test subjects were exposed to elevated levels of thermal conditions on their forearms. The rate of forearm burning was then applied to the entire body (except the hands and feet) to predict the likelihood of burns.
REAR
During a flash fire simulation, eight propane burners expose the manikin to flames of 84 kW/m2 (2 cal/s cm2) with a typical duration of 3 seconds but can also reach 20 seconds, dependent on the benchmarks from other standards, like those mentioned above.
Averages about 30% in these diagrams 131
ELECTROSTATIC
EN 1149:2008 Protective Clothing with Electrostatic Properties EN 1149:2008 is a European standard for safety garments protecting wearers against electrostatic discharge in working environments with explosive risks. Such environments are sometimes referred to as ATEX Environments, as per the two European directives for controlling explosive atmospheres. Materials tested using the tests methods outlined in EN 1149:2008 indicate safe electrical discharge properties when posed with the conditions of explosive environments. Bool produces anti-static clothing made with materials engineered to suppress static charge, thereby preventing sparks, which might cause a fire or explosions. Such clothing can be worn in oxygen-enriched environments; however, it does not protect against electric shocks.
Garments intended to be used in explosive environments must not conduct electrostatic charges from the air. EN 1149:2008 is divided into five parts: Test Method
Description
Minimum Compliance Values
EN 1149-1
Electrostatic properties (surface resistivity)
Surface resistance is ≤ 2.5x109
EN 1149-2
Electrostatic properties (electrical resistance through a material, vertical resistance)
Electrical resistance > 105W
EN 1149-3
Electrostatic properties (inductive charge)
t50 ≤ 4s or S > 0.2 (S = Shielding Factor)
EN 1149-4
Garment test methods
yet to be published
EN 1149-5
Electrostatic properties. Performance requirements and material design
t50 ≤ 4s or S > 0.2; or Surface resistance is ≤ 2.5x109
EN 1149-1 SURFACE RESISTANCE
EN 1149-2 ELECTRICAL RESISTANCE
EN 1149-3 CHARGE DECAY
132
This test method measures surface resistivity by determining how the fabric surface resists the dissipation of a charge. This test ensures that the charge will not develop to the point where it can generate a spark. The determined surface resistance of the fabric is to be 2.5x109 Ohms (Ω) or less. This method is not appropriate for core conductive fibres. A material is either tested to EN 1149-1 (Surface resistance) or EN 1149-3 (Charge decay) as these tests measure two aspects of the same property.
The second part of this standard outlines procedures to measure the vertical resistance of the material sample. Vertical resistance refers to the tendency of the fabric to allow charge to pass through the thickness of the material. It is primarily used to test heavier weight fabrics that are woven. It is not used to specify protection against mains voltage. Electrical resistance must be greater than 105W to pass this test.
The EN 1149-3 test reveals the ability of the garment's fabric to dissipate electrostatic charge from across its' surface. This process ensures that the material discharges any electrostatic charges to the air and will not conduct it to the users clothing, therefore eliminating the risk of conductivity for the wearer and the risk of a potential explosion.
EN 1149-4
Part 4 of the standard is yet to be formally published. It was originally outlined as a testing method for the garment in its entirety.
GARMENT TEST METHODS
EN 1149-5 PERFORMANCE REQUIREMENTS
EN 1149-5 draws upon the results of tests conducted in parts 1 to 3 to develop performance requirements for an anti-static garment. They may be tested according to the appropriate test methods outlined in parts 1 to 3, but can only be certified to part 5, after meeting stipulated performance requirements. For FR garments which are worn by electrical workers and other industries working with fire, this clause is specifically focused on the overall garment construction, ensuring that the amount of fabrics, reflective tape and other components are assembled for maximum safety performance. To be compliant to part 5 of EN 1149 the garment must also display the following information on the 'User Instructions:' a warning that the garment must be earthed to allow grounding of a charge should not be opened or removed in an explosive atmosphere clothing is suitable for wearing in ATEX Zones 1, 2, 20, 21 & 22 but that use in Zone 0 or in oxygen enriched atmospheres should be authorized by a qualified safety engineer. NOTE - Clothing constructed to this standard are only classified as safe workwear in environments with explosion hazards if they are accompanied by compliance to standards for flame retardant clothing (e.g. EN ISO 11612 or EN ISO 531).
133
OXYGEN
ASTM D2863-2013 Oxygen Index ASTM D2863 outlines the standard test for measuring the minimum Oxygen Concentration to Support Candle-Like Combustion, referred to as the Limited Oxygen Index (LOI). This value has differing roles in the development and assessment of FR fibres. It is used to characterise the fibres, polymers, textiles and other material components. As this is a test method alone, it is essential to judge the resulting value in light of performance requirements from other standards for specific garments.
Defines the oxygen level needed for the test material to support combustion. It is important to note that this test method is used on various plastic-based materials, products, or assemblies. It measures and describes their response to heat and flame under controlled conditions. The test method involves three procedures: Procedure A: Top surface ignition Procedure B: Propagating ignition Procedure C: Minimum value of oxygen index The Limited Oxygen Index (LOI) value is measured in SI base units and expressed as the percentage of oxygen in the atmosphere to support combustion. LOI does not indicate the behaviour of fabric in regards to liquid metal or metal droplets from welding. The test is performed regularly within the research and development process of blended fabric engineering, especially those intended for constructing an FR garment. When calculating blend ratios between certain fibers - cotton and modacrylic - to achieve an LOI that lies over 25%, performing this test will aid engineers in the fine-tuning process, to factor in an indication of fibre combustibility. The resulting value of this test LOI is often used as an indicator for whether the garment's fabric will support combustion. However, an LOI must be put into context when assessing an FR garment and not be used as a sole source of judgment. The LOI is just one piece of data that informs an accurate fire hazard assessment of the materials or products. It is essential to consider this value in light of other considerations which contribute to whether the garment will support combustion. Therefore, the results from this test should be used in conjunction with other standard tests for an accurate assessment of fire hazard.
134
The below table indicates industry estimations of what LOI percentage would support the best performance for an FR fabric. However, it is unproven whether fabric with an LOI of 45% provides a significant leap in safety compared to a fabric with an LOI of 28%. Liquid Oxygen Index (LOI)
Description
>25%
Flame retardant fabric, self-extinguishing
22-25%
Slow burning, difficult to ignite, could potentially self-extinguish
18-22%
Burnable, burns without self-ignition
<18%
Easy ignition, burns and flame is rapidly spreading
TEXTILE SAFETY
OEKO-TEX STANDARD 100 Tested for Harmful Substances Oeko-Tex® is a testing and certification organisation for textiles, consisting of 18 independent research and test institutes with offices in over 60 countries. Oeko-Tex® developed Standard 100, a globally renowned testing and certification process for approving a textile free of harmful substances.
The Oeko-Tex® Standard 100 certification is a guarantee that a garment is free from harmful chemicals. Independent Oeko-Tex® partner institutes conduct the test following the Oeko-Tex® criteria catalogue, which considers a range of harmful substances, both regulated or non-regulated, that threaten human health. The catalogue stipulates the safe absence or present levels of these chemicals in the tested sample. The Oeko-Tex® catalogue sets levels that often surpass national and international requirements. Oeko-Tex® Standard 100 tests all textiles and textile components from threads to finished fabric articles, including but not limited to its threads or buttons. All the chosen components must reach the performance levels after rigorous lab testing for harmful substances. Achieving a Standard 100 certification ensures that the textile components are safe from chemicals known to inflict harm to humans. The criteria for certification includes testing for the following substances: Illegal substances Legally regulated substances Known harmful (but not legally regulated) chemicals As well as parameters for health care Statutory provisions available within Oeko-Tex® catalogue. The catalogue records detail the: Regulations regarding prohibited azo dyes, formaldehyde, nickle etc. Health inhibiting chemicals that are not statutorily regulated Annexes XVII and XVI of the REACH Directive and of the ECHA-SVHC Candidate list covered within the test method 100 laboratory test parameters and intended use of the textiles (more contact with skin intended the more rigorous and strict the test limit are).
PARVOTEX FABRIC Parvotex Fabric is free from harmful chemicals achieving certification to Oeko-tex® Standard 100 Product Class II, which is awarded to articles with direct contact to the skin joining the same category as products like underwear, bed linen, T-shirts etc.
Standard 100 by Oeko-Tex® Certified according to annex 4 Product Class: II - 20150K0955 Institute Type of certified article - Woven or knitted fabric made of below materials or part of them: dyed modacrylic, cotton and polyamide, and white polyarylate, and mixtures with white SPS (Sulfonyl Polyphenylene Sulfide), Meta-aramide, Lenzing LyocellTM, or Conductive nylon or polyester dope dyed (white, black or grey), with or without spandex; laminated with PU membranes; with/without water/oil/stain repellent finish. NON-woven fabrics in white made of below materials or part of them: Modacrylic, Cotton, polyamide, polyarylate, Meta-aramide, LENZING™ FR (Flame retardant accepted by OEKO-TEX®), Lyocell, or polyester, with/ without lamination with PU membranes. Produced by using pre-certified material according to STANDARD 100 by OEKO-TEX®.
135
GARMENT CARE
LAUNDERING High-visibility and Flame Retardant Laundering Instructions As stated in AS/NZS 4602.1.2011 High-visibility Safety Garments, washing and industrial laundering can diminish the high-visibility properties of workwear garments
SAFETY INSPECTION Safety officers and workers should regularly check for garment fading, tearing, dirt/ soiling, busted seams or other damaged garment components. When garments undergo industrial washing, ensure that high-visibility colour standards are upheld, and garments are left unscathed by these cycles. Garments should be analysed and examined for the above damages every three months to maintain safety. Regular clothing inspections are a common means of performing these checks.
LABELLING AS/NZS 1905.4.2010 stipulates that accurate care labelling is displayed clearly on every garment in a format that follows AS/NZS 1957:1998 Textiles - Care Labelling, a uniform system of care labelling. The standard states that labels must convey the correct care information as dictated by the manufacturer. Labelling is often the primary source for garment care instructions.
WASHING TIPS When home laundering, the following are simple tips you can remember to ensure your garment maintains its structural integrity: ash garments inside out to prevent the fabric around the seams and trims W from fraying during abrasive laundering. L arge quantities of fabric softeners should be avoided on all garments with retroreflective materials. The chemical compounds in fabric softeners can damage reflective tapes. F ollow the washing instructions written on the clothing tags. Generally store garments in dry, cool areas away from heat and direct sunlight, which may cause fading.
136
Standard Workwear Laundering Instructions COTTON FABRICS
WET WEATHER & SOFTSHELL FABRICS
Shirts, Trouser, Coveralls, Shorts & Jackets Wash prior to first time use
Warm tumble dry Rinse thoroughly
Warm machine wash with like colours
Machine wash at no more than 70°C
Hot iron
Do not bleach
Dry cleanable(A)
Do not tumble dry
Do not bleach or use whiteners Wash with standard laundry detergent
Do not iron
Dry in shade Do not overdry
Do not dry clean Do not expose to naked flame
POLYESTER FABRICS Polos
Fleece Jumpers Machine wash at no more than 40°C Do not bleach
Warm machine wash Use liquid or dissolved powder detergent Do not bleach
Drip dry in shade
Do not tumble dry
Warm tumble dry
Warm iron
Iron on synthetic setting Dry cleanable (P)
Do not dry clean Reduced spin or drip dry Rinse well
FR Workwear Laundering Instructions If FR clothing is washed incorrectly, that is all contaminants are not removed during the washing process, this will result in the compromise of the garment's flame-resistant properties. For this reason, effectively cleaning and maintaining garments properly must factor laundering, repair, and replacement to protect FR properties. In Australia the AS/NZS ISO 2801:2008 (R2016) Standard for protection against heat and flame - General recommendations for selection, care and use of protective clothing, outlines the necessary treatment of FR clothing. ASTM International guide home and industrial laundering within the following two primary standards: ASTM F1449 Guide for Individual Laundering of Flame, Thermal and Arc Resistant Clothing, covers maintenance of garments by industrial laundries. ASTM F2757 Guide for Home Laundering Care and Maintenance of Flame, Thermal and Arc Resistant Clothing - providing recommendations for inspection criteria that are significant to the performance of flame-resistant or arc rated clothing.
FR COTTON
FR SOFTSHELL
Shirts, Trouser, Coveralls, Shorts & Jackets
Jackets
Wash prior to first time use or if stained, with like colours
Warm tumble dry, short cycle Rinse thoroughly
Wash prior to first time use or if stained, with like colours
Machine wash at no more than 60°C
Medium heat iron
Machine wash at no more than 40°C
Do not use chlorine-based bleach
Dry cleanable
Do not bleach
Do not use fabric softeners or soap
Do not tumble dry
Dry in shade and do not overdry
Do not dry clean Do not iron
137
NECK
NECK
CHEST
BUST WAIST WAIST
HIPS
INSIDE LEG
138
INSIDE LEG
GARMENT CARE
FITTING GUIDE For an accurate fit please ensure the measuring tape is level and firm, but not tight. Neck
Measure at collar level with 2 fingers behind the measuring tape
Chest/Bust
Stand naturally, measure around the largest part of chest/bust
Tips for Measuring Thinner clothing or only undergarments is best when measuring Hold tape straight when measuring, ensure no slack distorts measurements
Waist/Hips Stand naturally, measure around waistline or hips Inside Leg
Place fingers underneath measurements on tape to not obstruct view
Measured from the crotch to the heel of the shoe
Ask another person to read measurements for you
SIZING CHARTS Shirts, Jackets and Vests Size
XS
S
M
L
XL
2XL
3XL
4XL
5XL
6XL
7XL
Neck (cm)
34/35
36/37
38/39
41/42
43/44
45/46
47/48
49/50
51/52
53/54
55/56
To Fit Chest (cm)
85
90
95
100
105
110
115
120
125
130
135
Coveralls, Pants and Shorts Size
72R
77R
82R
87R
92R
97R
102R
107R
112R
117R
122R
Waist (Inches)
28
30
32
34
36
38
40
42
44
46
48
Inside Leg (cm)
71
74
77
79
83
84
87
87
87
87
87
Size
87S
92S
97S
102S
107S
112S
117S
122S
127S
132S
Waist (Inches)
34
36
38
40
42
44
46
48
50
52
Inside Leg (cm)
69
71
74
76
79
81
81
81
81
81
Size
79L
84L
89L
94L
Waist (Inches)
30
32
34
36
Inside Leg (cm)
80
83
85
88
Size
8
10
12
14
16
18
20
22
To Fit Bust (cm)
85
90
95
100
105
110
115
120
Size
6
8
10
12
14
16
18
20
22
24
To Fit Waist (cm)
67
72
77
83
97
92
97
102
107
112
To Fit Hips (cm)
88
93
98
103
108
113
118
123
128
133
Women's Shirts
Women's Trousers
139
GARMENT CARE
CUSTOM WORKWEAR Despite stringent safety requirements; not all workwear has to look the same. Custom workwear is gear made for your crew's unique needs. TRu Workwear will design and manufacture your company's workwear with a range of branding and tailoring options.
CUSTOM CONSTRUCTED GARMENTS A diverse range of onsite conditions requires a custom designed garment. Although there are strict safety standards that all Australian workwear must adhere to, variations in tape configurations, high-visibility fabric types, and colours are necessary for certain conditions. When making alterations to the design or construction of a garment, compliance to AS/NZS safety standards must remain. With an in-depth knowledge of all standards, TRu Workwear guarantees that all custom constructed garments remain compliant with safety standards. TRu Workwear custom design and manufacture workwear with features like the following:
Retro-reflective & Fluorescent Fabrics Garments compliant to AS/NZS 1906.4:2010 Class RF that combine the performance of Class R and Class F for high-visibility fabrics
Fabric Colours As stipulated in AS/NZS 4602.1:2011 a certain level of high-visibility fabric is required to be safe; however other dyes, colours and patterns are permissible for garment areas that are not required to use high-visibility fabrics.
Tape Configuration Depending on your jobsite, extra visibility may be required during night hours. Adding retroreflective tape in areas such as the lower back will increase night-time visibility when bending down to work.
MADE TO MEASURE Safe workwear, is workwear that fits. Having extended sleeves needing constant adjustment or pants which drag along the floor all pose safety hazards in the workplace. For unique physical requirements, TRu offers tailoring services that ensure everyone onsite receives workwear with an optimal fit for comfort and safety.
140
PRIVATE BRANDING TRu Workwear deploys advanced embroidery equipment featuring multi-coloured thread options for the highest quality embroidered finish. Be recognisable onsite. Adding a logo or company emblem to your workwear shirts, trousers or jackets is a clear cut company signifier. Your work onsite can then reflect your brand principles. Help people connect the dots with workwear that aids brand recognition. According to AS/NZS 4602.1:2011 the surface area of a logo must be in addition to 0.2m2 of high-visibility fabric. This is outlined in the standard as follows: The following should be deducted from the total area of the upper torso material - area of words, logos, pockets or underarm ventilation gussets that does not qualify as background material
Co m Lo pan go y
Company Logo
Company Logo
141
Index
Shirts
142
Trousers Part No
Description
Pg
Part No
Description
Pg
CWRX190
Force360 Day Vest - Hi-Vis Orange
41
DT1138
Lightweight Cotton Trousers
45
CWRX191
Force360 Day Vest - Hi-Vis Yellow
41
DT1138T
Lightweight Cotton Trousers with 3M™ Tape
45
CWRX192
Force360 Day/Night Vest - Hi-Vis Orange
41
DT1139
Heavyweight Cotton Cargo Short
55
CWRX193
Force360 Day/Night Vest - Hi-Vis Yellow
41
DT1140
Heavyweight Cotton Trousers
49
CWRX194
Force360 Day/Night Vest - Hi-Vis Orange
41
DT1140T
Heavyweight Cotton Trousers with 3M™ Tape
49
DS1112T1
Regular Weight L/S Hi-Vis Drill Shirt with 3M™ Tape
33
DT1142
Heavyweight Cotton Cargo Trousers
50
DS1114T1
Regular Weight L/S Cotton Hi-Vis Closed Front Drill Shirt with 3M™ Tape
36
DT1142T
Heavyweight Cotton Cargo Trousers with 3M™ Tape
50
DS1118
Lightweight Vented L/S Hi-Vis Drill Shirt
26
DT1142T2
Heavyweight Cotton Cargo Trousers with Biomotion 3M™ Tape
51
DS1118T1
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape
26
DT1147
Midweight Cotton Cargo Shorts
55
DS1166T3
Lightweight Vented L/S Hi-Vis Drill Shirt with TRuVis Tape
26
DT1150
Midweight Cotton Cargo Trousers
47
DS1166T4
Lightweight VIC Rail Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape
29
DT1150T
Midweight Cotton Cargo Trousers with 3M™ Tape
47
DS1166T5
Lightweight NSW Rail Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape
29
DT1154
Denim Jeans
53
DS2112
Regular Weight L/S Hi-Vis Drill Shirt
33
DT1154T
Denim Jeans with 3M™ Tape
53
DS2112T1
Regular Weight L/S Hi-Vis Drill Shirt with 3M™ Tape
33
DS2114
Regular Weight L/S Cotton Closed Front Hi-Vis Shirt
35
Part No
Description
Pg
DS2114T1
Regular Weight L/S Cotton Closed Front Hi-Vis Drill Shirt with 3M™ Tape
35
DC1120T1
Lightweight Hi-Vis Coverall with 3M™ Tape
59
DS2164T1
Lightweight Vented L/S Closed Front Hi-Vis Drill Shirt with 3M™ Tape
35
DC2120T1
Lightweight Hi-Vis Coverall with 3M™ Tape
59
DS2165
Lightweight Vented S/S Hi-Vis Drill Shirt
25
DC2179T
Action Back Hi-Vis Cotton Overall with 3M™ Tape
60
DS2166
Lightweight Vented L/S Hi-Vis Drill Shirt
25
DC2180T1
Heavyweight Hi-Vis Cotton Coverall with 3M™ Tape
60
DS2166T1
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape
25
DS2169
Ripstop Vented L/S Hi-Vis Shirt
31
DS2169T1
Ripstop Vented L/S Hi-Vis Shirt with 3M™ Tape
TS1850T5
Coveralls
Women's Workwear Part No
Description
Pg
31
DSW2169T1
Ripstop Vented L/S Hi-Vis Shirt with 3M™ Tape
65
Mircomesh L/S Hi-Vis Polo NSW Rail Shirt with TRuVis Perforated Tape
39
DSW2166T1
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape
65
TS2850
Mircomesh L/S Hi-Vis Polo Shirt
39
DSW2112T1
Regular Weight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape
65
TS2850T3
Mircomesh L/S Hi-Vis Polo Shirt with TRuVis Tape
39
DSW1166T1
Lightweight Vented L/S Hi-Vis Drill Shirt with 3M™ Tape
66
TS2851
Mircomesh S/S Hi-Vis Polo Shirt
39
DSW1166T5
NSW Rail Lightweight Vented L/S Hi-Vis Drill Shirt with TRuVis Perforated Tape
66
Index
Women's Workwear (cont)
Core Series
Part No
Description
Pg
Part No
Description
Pg
DTW1150
Midweight Cotton Trouser
69
CS2000T3
Lightweight Vented Hi-Vis Drill Shirt with TRuVis Tape
93
DTW1150T
Midweight Cotton Cargo Trouser with 3M™ Tape
69
CT1080T3
Midweight Drill Trouser with TRuVis Tape
93
CSW2000T3
Lightweight Womens Hi-Vis Shirt with TRuVis Tape
95
CTW1080T3
Midweight Womens Trouser with TRuVis Tape
95
Part No
Description
Pg
Winter Workwear Part No
Description
Pg
DJ2192T1
Hi-Vis Cotton Canvas Jacket with 3M™ Reflective Tape
77
TF1950T5
1/4 Zip Fleece Jumper with TRuVis Reflective Tape
74
TF2950
1/4 Zip Fleece Jumper
73
TA1010
Eco-Friendly Bamboo Socks - Single Pack
97
TF2950T4
1/4 Zip Fleece Jumper with TRuVis Reflective Tape (VIC Rail)
73
TA1030
Eco-Friendly Bamboo Socks - Triple Pack
97
TF2950T7
1/4 Zip Fleece Jumper with TRuVis Reflective Tape
73
TF2955T1
Full Zip Water Repellent Fleece Jacket with TRuVis Reflective Tape
74
TJ1911T5
3 in 1 Jacket with Removable Fleece Inner Vest and TRuVis Reflective Tape
TJ1960T5
Accessories
Bool Workwear Part No
Description
Pg
80
BW1300T5
Hi-Vis FR Softshell Jacket with Segmented FR Tape
119
Softshell Full Zip Jacket with TRuVis Reflective Tape (NSW Rail)
77
BW1500T1
Lightweight PPE1 FR Shirt with Loxy™ Reflective Tape
107
TJ1970T4
VIC Compliant Rain Set in Bag (VIC Rail)
89
BW1500T5
Lightweight PPE1 FR Shirt with Loxy™ Reflective Tape (NSW Rail)
107
TJ1970T5
Rain Set in Bag for Night Work
87
BW1550T
Regular Weight PPE2 FR Pants with Loxy™ Reflective Tape
113
TJ1970T9
Rain Set in Bag for Day and Night Work
88
BW1560T
Regular Weight PPE2 FR Cargo Pants with Loxy™ Reflective Tape
114
TJ2900T6
Rain Jacket with TRuVis Reflective Tape
79
BW1560T2
Regular Weight PPE2 FR Cargo Pants with Biomotion Loxy™ Reflective Tape
114
TJ2910T6
4 in 1 Jacket with TRuVis Reflective Tape
82
BW1570T1
Regular Weight PPE2 Coverall with Loxy™ Reflective Tape
117
TJ2920T6
6 in 1 Rain Jacket Combo with TRuVis Reflective Tape
85
BW1590T1
Regular Weight PPE2 FR Shirt with Loxy™ Reflective Tape
110
TJ2945T4
Wet Weather Jacket with Removable Sleeves and TRuVis Reflective Tape
80
BW1590T5
Regular Weight PPE2 FR Shirt with Segmented Loxy™ Reflective Tape
110
TJ2946T4
Pilot Jacket with TRuVis Reflective Tape
79
BW2300T8
Hi-Vis FR Softshell Jacket with Segmented FR Tape
120
TJ2960T1
Softshell Full Zip Jacket with TRuVis Reflective Tape
77
BW2500T1
Lightweight PPE1 Two Tone FR Shirt with Loxy™ Reflective Tape
108
TV1915T5
Wet Weather Reversible Vest with TRuVis Reflective Tape
79
BW2570T1
Regular Weight PPE2 Two Tone Coverall with Loxy™ Reflective Tape
116
TW1996T2
Wet Weather Pants with Biomotion Tape
89
BW2590T1
Regular Weight PPE2 Two Tone FR Shirt with Loxy™ Reflective Tape
111
The paper used has been produced in an ISO14001 accredited facility ensuring all processes involved are of the highest environmental standards. The fibre is sourced from certified and well managed forests. Vegetable based inks have also been used along with environmentally responsible printing practices.
143
trubrands.com.au
orders@trubrands.com.au
6 Hathor Way, Bibra Lake, WA 6163 Distributed by:
08 9331 1141