Tranemo | Comtec carl backs | Yellow Hi-Vis Collection by tranemo-dk

YELLOW HI-VIS COLLECTION Flame Retardant and Electric Arc Protective Workwear

TRANEMO ADVANCED WORKWEAR

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

ABOUT TRANEMO ADVANCED WORKWEAR

ADVANCED FLAME RETARDANT SOLUTIONS Tranemo has a simple vision that no one should be seriously injured in an accident where the correct work clothing could have prevented the accident, or helped to reduce the consequences of it. We strive to make workplaces safer by leading the development of new advanced flame retardant solutions. 100% INHERENT FLAME RETARDANT Tranemo only sells flame retardant workwear, which ensures the user protection throughout the garment’s lifetime. The flame retardant properties are integrated into the molecular structure of the fibers and cannot be washed out or worn off. In addition to the flame retardant properties, comfort, low weight, and durability are among the advantages.

EN ISO 20471 High Visibility, and EN 1149-3 Antistatic. Since EN ISO 15797 is always performed on new and clean clothing where no dirt is involved, Tranemo also conducts real-use tests of workwear in combination with laundering at our industrial laundry partners to obtain the most reliable results. After wear tests and washing, we verify that the clothing still maintains the highest performance. Tranemo also conducts internal washing tests before each production to ensure the highest durability of fabrics and reflective tapes.

PERSONAL PROTECTION SYSTEM Tranemo’s goal is zero serious work-related injuries caused by flame or intense heat. The right clothing can save the user’s life if accidents occur. The combination of clothing is crucial for the level of protection. We design the protection system from the skin outward. Tranemo provides advice on the need for flame retardant underwear, solutions for all seasons, designs for specific functions, and, of course, solutions for both women and men. We develop our collections as systems for specific industries and the risks present there.

PPE CLOTHING FOR WOMEN For safety reasons, it is important to wear the correct PPE clothing, and that it fits properly. Comfort and ergonomics are reasons often cited for protective clothing not being worn correctly or perhaps not being used at all. Therefore, we also offer a selection of women’s models in women’s sizes in our product range.

USER TEST We conduct user tests in collaboration with our largest customers to ensure that the clothing has all the desired features and functions effectively. Comfort and ergonomics are reasons often cited for protective clothing not being worn correctly or perhaps not being used at all.

INDUSTRIAL LAUNDRY Industrial laundering of FR clothing is often recommended to ensure they are clean and suitable for use. To achieve the best results, we also always recommend that customers testwash FR clothing following our washing instructions. Tranemo conducts tests after 50 industrial washes in accordance with EN ISO 15797 for: EN ISO 11612 A1 Surface Ignition,

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

SYMBOLS All Tranemo PPE Clothing follows the Regulation (EU)2016/425 and the latest European (EN) standards for PPE Clothing covered by the Regulation.

CE MARKING FOR PROTECTIVE GARMENTS All Tranemo PPE Clothing is CE marked. The CE marking indicates that a Notified Body has CE type examined these garments according to the PPE Regulation (EU)2016/425. On Tranemo garments you will find this symbol on the inside CE label. The CE label also shows which standards and classes the garments are approved for.

UKCA MARKING FOR PROTECTIVE GARMENTS From 01/01/2025, products sold to Great Britain must be labeled with the British product mark UKCA, United Kingdom Conformity Assessed, which will then replace the European CE mark. Until then, only CE-marked products are allowed. Tranemo will already now label new products with both CE and UKCA.

INFORMATION SYMBOL When you find this symbol on the CE label inside the PPE garment it indicates that there is additional information from Tranemo attached to your PPE garment. This information must be read before you start using the garment to ensure that it is worn correctly and giving the optimum protection in the workplace.

TRANEMO SKINSAFE™ The Tranemo Skinsafe™ symbol is shown on each garment that can be combined in the Skinsafe system and recommended by Tranemo.

STANDARD 100 BY OEKO-TEX® Most of the fabrics and accessories that Tranemo uses are certified to class 2 according to Oeko-Tex® standard 100. Oeko-Tex® is an independent third-party certification process that ensures control of harmful and hazardous chemicals. The garments are tested for numerous regulated and non-regulated substances, which may be harmful to human health. When a garment is certified in accordance with Standard 100, you can be certain that every component of this garment, i.e. fabrics, thread, buttons, labels and other accessories, have been tested for harmful substances and that the garment therefore is harmless for human health. We work continuously to reach our goal - all products certified at garment level.

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

EN ISO 11612

Protective clothing to protect against heat and flame

EN ISO 11611

Protective clothing for use in welding and allied processes

EN ISO 20471

High Visibility clothing

EN 342

Protective clothing against cold

EN 61482-2:2020 / EN 61482-2:2018

Protective clothing against the thermal hazard of an Electric Arc

EN 13034 TYPE PB [6]

Protective clothing against liquid chemicals

RIS-3279-TOM ISSUE 2

Railway Group High-Visibility Standard for UK

EN 343

EN 1149-5

Protective clothing with Electrostatic properties

EN ISO 14116

Protective clothing with lower level of Flame Retardant protection

EN ISO 15797

Procedures for industry laundry and finishing of workwear

EN 13758-2

Protective clothing against rain

Protection against UV radiation

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

COLLECTION OVERVIEW

WINTER JACKET

SOFTSHELL JACKET

JACKET

SHELL JACKET

JACKET

HALF ZIP SWEATSHIRT

Art.nr.: 510193

Art.nr.: 514595

Art.nr.: 583481

Art.nr.: 513594

Art.nr.: 503588

Art.nr.: 508889

SWEATSHIRT

LONG SLEEVES T-SHIRT

Art.nr.: 508589

Art.nr.: 637589

Art.nr.: 598589

Art.nr.: 508789

Art.nr.: 508289

Art.nr.: 637289

LONG SLEEVES T-SHIRT

T-SHIRT

TROUSERS

Art.nr.: 508486

Art.nr.: 594789

Art.nr.: 508689

Art.nr.: 508189

Art.nr.: 582181

Art.nr.: 632281

CRAFTSMAN TROUSERS

TROUSERS

CRAFTSMAN TROUSERS

TROUSERS

WINTER TROUSERS

Art.nr.: 632581

Art.nr.: 632181

Art.nr.: 632481

Art.nr.: 502088

Art.nr.: 582081

Art.nr.: 512293

BIB 'N' BRACE

SHELL TROUSERS

BIB 'N' BRACE

BOILERSUIT

Art.nr.: 584181

Art.nr.: 513294

Art.nr.: 504088

Art.nr.: 584081

Art.nr.: 581181

Art.nr.: 501088

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

COLLECTION OVERVIEW

SHORT ZIP TURTLENECK

LONG SLEEVES T-SHIRT

T-SHIRT LONG SLEEVES

TURTLENECK

CARDIGAN

LONG JOHNS

Art.nr.: 592092

Art.nr.: 594092

Art.nr.: 631590

Art.nr.: 631990

Art.nr.: 633090

Art.nr.: 593092

LONG JOHNS

BOXER SHORTS

NECK PROTECTION

WOOL HAT

BALACLAVA

Art.nr.: 631290

Art.nr.: 591192

Art.nr.: 599900

Art.nr.: 630790

Art.nr.: 630890

Art.nr.: 599592

KNEEPADS

SOCK

WOOL TERRY SOCK

GLOVES ARC 16

GLOVES ARC 40

Art.nr.: 902000

Art.nr.: 905400

Art.nr.: 907500

Art.nr.: 907900

Art.nr.: RG0004

Art.nr.: RG0005

GLOVES ARC 4

GLOVES ARC 10

ARC FLASH GLOVES HC4

FR CLASSIC HOOD

ARC HOOD + VISOR + HELMET

SAFETY HELMET ARC 36

Art.nr.: RG0006

Art.nr.: RG0009

Art.nr.: 4650410

Art.nr.: 7406996

Art.nr.: SA0001

Art.nr.: RX0021

SAFETY HELMET BOX CL. 1

ZENITH X HELMET + ARC VISOR

HELMET WITH FACE SHILD

CASCADES MID, DISC

IRON HD BLACK MID

CONQUEST BLACK HIGH

Art.nr.: RX0001

Art.nr.: WVI00015

Art.nr.: 7406501

Art.nr.: 6-63021

Art.nr.: 5-63274

Art.nr.: 5-63073

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

ART.NR. 514595

Stretch softshell jacket with high arc flash protection EN 61482-2

ELIM: 23 cal/cm2 EBT: 28,0 cal/cm2

EN 11612 A1 B1 C1 F1

FLAME RETARDANT WORKWEAR FOR PHYSICALLY ACTIVE WORKERS IN THE ELECTRICAL AND ENERGY INDUSTRY STRETCH FR KOLLEKTIONEN

CERTIFICATIONS FOR THE SERIES

Jackets from the Stretch FR collection are made from a soft and flexible fabric that is wind and water-resistant, providing impressive protection in the case of electric arcs (PPE3). When combined with the stretch pants, the user gets a complete and comfortable system. The flame retardant stretch pants elevate comfort to a whole new level with a modern design, comfortable fit, and many great tool storage features.

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

METAL FREE WINDPROOF

ART.NR. 632281

Stretch pants with excellent freedom of movement EN 61482-2

ELIM: 8,1 cal/cm2 EBT: 8,7 cal/cm2

WATER-REPELLENT

EN 11612

A1+A2 B1 C1 F1

811: TERA TX

260 g/m2

852: FR STRETCH

320 g/m2

Extra reinforced fabric providing high

Naturally flame retardant twill textile

tear strength despite its low weight.

with high elasticity.

The pants offer 20% stretch, high flame retardant protection, and are suitable for industrial laundering.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

TOPS

510193 FLAME RETARDANT WINTER JACKET

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 2 ELIM: 26,0 cal/cm² ATPV: 28,0 cal/cm² EN ISO 11612 1149-5 A1+A2 B1 C1 F1 EN 11611 IECISO 61482-2 CL.1 APC 2A1+A2 ELIM: 26,0 cal/cm² ATPV: 28,0 EN 13034 cal/cm² type PB[6] ISO 20471 EN 1149-5 CL.3 CL.2* EN ISO(XS) 11611

Hidden zip and stud fastener in front. Two loops for communication equipment. Vertical chest pocket with zip on right chest. D-ring. Side pockets with fleece lining and pocket flaps. Extended back with two side slits for enhanced movement. Adjustable cuffs. Wind stoppers in sleeves. Inside Non-Metal and Flame Retardant Hi-Vis winter of trousers with Zip taped pockets, one forInherent Ipad/documents. Fleece on the inside the collar. seams and quilt heat lining. Wind and waterproof according EN 9151 343. 93. *The access for back seal badges. Can be supplied with to hood Removable with plastic buckles. High back withfor fleece lining for extra garment hasbraces a combined certification and is approved EN ISO 20471 protection. Loopstogether in waist.with SideTranemo pocketstrousers with zip.orFront pockets flaps CL.3 when worn bib 'n' brace with certified and D-ringtoinEN theISO right pocket. Inside kneepad pockets. Concealed according 20471 CL.1 or CL.2. **The garment is testedtwo-way in a 3 zip insystem legs. Snow barrier inbasic legs and adjustable ankle width. *The trousers layer together with underwear. Tranemo recommends underwear are tested inand a 3 5980. layer system together with basic underwear and jacket 5101 5920/5940 93, 5109 93, 5118 94 or 5119 94. Tranemo recommends underwear 5930 Colour: 94 yellow/navy and 5990. Size: XXS-4XL

512293 FLAME RETARDANT WINTER TROUSERS

Colour: 94 yellow/navy Size XXS-4XL Size: XS-4XL Quality:

CL.1 A1+A2 EN 343 4.1 EN 13034

054: Lining, quilted FR, 160+80 g/m²

Size XS-4XL

type **ENPB[6] 342

055: Lining, quilted FR, 160+120 g/m²

Quality: 054: Lining, quilted FR, 160+80 g/m²

(5101+5122) EN ISO 20471

931: Cantex 240IR, twill PU coated, 260 g/m², EN 343 4:4 893: Lining, Cantex Fleece, 330 g/m²

CL.2 CL.1 (XS-S)

931: Cantex 240IR, twill PU coated, 260 g/m², EN 343 4:4

EN 343 4.1 *EN 342

514595 FLAME RETARDANT SOFTSHELL JACKET Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort.

EN ISO 11612 A1 B1 C1 F1 IEC 61482-2 APC 2 ELIM: 23,0 cal/cm² EBT: 28,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1 EN 13034 type PB[6]

The jacket has a high Arc Rating and is ergonomically shaped for working with raised arms. Heat sealed reflective stripes for greater comfort. Concealed front zip and double storm flap with press studs. Two loops for communication equipment. Left chest pocket with flap. Right chest pocket with zip and hole for microphone. Side pockets with zip. Left sleeve pocket with flap, hidden keyring holder and strap for ID-pocket. Inside knitted cuffs in sleeves. Drawcord at the bottom of the jacket. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. Colour: 94 yellow/navy

EN ISO 20471 CL.3

Size: XS-4XL

CL.2* (XS-S)

Size XS-4XL

TRANEMO SKINSAFE

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

950: Windtech FR 340, 340 g/m², wind and water resistant, LOI: 29,5%

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

CL.1, LOI: 29,8%

EN ISO 20471 CL.1 EN ISO 15797 50 WASHES

YELLOW HI-VIS COLLECTION

TRANEMO SKINSAFE

TOPS

583481 FLAME RETARDANT JACKET Non-Metal and Inherent Flame Retardant Hi-Vis industry jacket in a light fabric with a comfortable feel and good tear resistance.

EN ISO 11612 A1+A2 B1 C1 E1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN ISO 11611 CL.1 A1+A2

Concealed front zip and press studs. Extended back. Two loops for communication equipment. Right chest pockets with flap, mobile phone pocket and strap for pencils. Left chest pocket with flap. Vertical chest pocket with zip. Sleeve pocket with flap, hidden D-ring and strap for IDpocket. Side pockets with flaps. Adjustable waist and cuffs. Two inside pockets. Contrast stitching. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. Colour: 94 yellow/navy

EN 13034

Size: XS-4XL

type PB[6]

Size XS-4XL

EN ISO 20471

Quality: 811: Tera TX, 260 g/m², LOI: 29,8%

CL.2* EN ISO 15797 50 WASHES TRANEMO SKINSAFE

513594 FLAME RETARDANT SHELL JACKET Non-Metal and Inherent Flame Retardant shell jacket with taped seams and mesh lining. Wind and waterproof according to EN 343.

EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm² EN 1149-5 **EN ISO 11611 CL.1 A1 **EN 13034 type PB[6] EN ISO 20471 CL.3

The jacket is ergonomically shaped for work with raised arms. Concealed front zip and double stormflap with press studs. Detachable and adjustable hood. Two loops for communication equipment. Chest pockets with zip. Keyring holder. Two inside pockets with zip, one for documents/Ipad with an integrated mobile phone pocket. Inside headset holder. Side pockets with zip. Adjustable sleeve width and inside knitted cuffs in sleeves. Drawcord at the bottom of the jacket. HTFR Dobby at the bottom of the jacket and on the sleeves. Heat sealed reflective stripes for greater comfort. Fiberfur lining 9128 can be attached. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. **Hood must be used or removed during welding or work with chemicals.

CL.2* (XS-S)

Colour: 94 yellow/navy

EN 343

Size: XS-4XL

3.3

Size XS-4XL Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

805: Lining, FR Mesh, 110 g/m² 911: Lining, Tera TX Light, 160 g/m², LOI: 26,7% 943: Mega TX 230IR, 230 g/m², LOI: 25,5%

11 EN ISO 11612

RETARDANT SHELL & ELECTRIC ARC PROTECTIVE WORKWEAR 513294 FLAMEFLAME RETARDANT TROUSERS Non-Metal and Inherent Flame Retardant shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343.

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

TOPS

503588 FLAME RETARDANT JACKET

’S

O R AT E P F

EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1+A2

PFAS-free and Inherent Flame Retardant Hi-Vis jacket with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the jacket with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Concealed front zip and press studs. Extended back. Two loops for communication equipment. Right chest pocket with flap, tool strap and concealed D-ring. Left chest pocket with flap. Vertical pocket with zip on left chest. Side pockets with flap. Adjustable cuffs with press studs. Two inside pockets. Contrast stitching. Colour: 94 yellow/navy

EN 13034

Size: XS-4XL

type PB[6]

Size XS-4XL

EN ISO 20471

Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5%

CL.3 TRANEMO SKINSAFE

885: Cantex Weld, 365 g/m², LOI: 29,0%

502088 FLAME RETARDANT TROUSERS

RIC

T L EG I S L

A1+A2 B1 C1 E3 F1 AT

’S

EN ISO 11612

O R AT E P F

EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C2 F2 EN ISO 11611 EN 61482-2 CL.2 A1+A2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 EN 13034 cal/cm² type PB[6]

PFAS-free and Inherent Flame Retardant Hi-Vis trousers with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the trousers with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.

508889 FLAME RETARDANT HALF ZIP SWEATSHIRT Front pockets. Hip pockets with flap. Cargo pocket with flap, mobile phone Soft andand comfortable, and Inherent Flame Retardant Hi-Vis pocket concealed Non-Metal D-ring for ID-pocket. Ruler pocket with flap and sweatshirt a short zip inpockets front. PFAS-free and 20%placement recycled cotton. reinforced with bottom. Kneepad with two different levels. Adjustable ankle press studs. Reinforced hem. Contrast Chest pocket withwidth flap, with ribbed sleeves and hem. Heatback sealed reflective stitching. stripes for greater comfort. 94 yellow yellow/navy Colour: 55 30"- 50"R; 32"- 40"T; 30"- 48"S Size: XS-4XL C44-64; C146-156; D84-120 Size XS-4XL

EN 1149-5 ISO 20471

Quality: 899: 802: Cantex Reinforcing Barricader EP, 545 g/m² Terry,fabric, 290 g/m², LOI: 26,5%

CL.1 EN ISO 20471 CL.3 TRANEMO SKINSAFE

884: Cantex Stretch, 365 g/m², LOI: 29,5% 885: Cantex Weld, 365 g/m², LOI: 29,0%

TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

EN ISO 14116

508189 FLAME RETARDANT T-SHIRT Non-Metal and Inherent Flame Retardant High Visibility polo shirt in tricot with a cotton finish on the inside for comfort. PFAS-free and 20% recycled

TRANEMO SKINSAFE

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

TOPS

508589 FLAME RETARDANT SWEATSHIRT

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt with round neck. PFAS-free and 20% recycled cotton.

EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm² EN 1149-5 EN ISO 20471

Knitted cuffs and waistband. Heat sealed reflective stripes for greater comfort. *Size XS has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.2. Size S-4XL has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. Colour: 94 yellow/navy

CL.2*

Size: XXS-4XL TRANEMO SKINSAFE

Size XXS-4XL

RIC

T L EG I S L

Quality: 899: Cantex Terry, 290 g/m², LOI: 26,5%

637589 FLAME RETARDANT SWEATSHIRT

’S

O R AT E P F

Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with round neck and increased visibility. 20% recycled cotton. PFAS-free.

EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-2 APC 1

Ribbed neck, cuffs and waistband. Heat sealed reflective stripes for greater comfort.

ELIM: 8,6 cal/cm² EBT: 11,0

Colour: 94 yellow/navy

cal/cm²

Size: XXS-4XL Size XXS-4XL

EN 1149-5

Quality: 899: Cantex Terry, 290 g/m², LOI: 26,5%

TRANEMO SKINSAFE

EN ISO 11612

RETARDANT WINTER & ELECTRICJACKET ARC PROTECTIVE WORKWEAR 510193 FLAMEFLAME RETARDANT Non-Metal and Inherent Flame Retardant Hi-Vis winter jacket with taped seams and quilt lining. Wind and waterproof according to EN 343.

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

TOPS

598589 FLAME RETARDANT SWEATSHIRT

’S

O R AT E P F

Non-Metal, soft and comfortable Inherent Flame Retardant sweatshirt with round neck and 20% recycled cotton. PFAS-free.

EN ISO 11612 A1+A2 B1 C2 F2 EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 TRANEMO SKINSAFE APC 1

Chest pocket with pocket flap on left chest. Loops for pencils on left sleeve. Knitted cuffs and waistband. Colour: 03 navy

508486 FLAME RETARDANT LONG SLEEVES T-SHIRT

Size: XS-4XL Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves. Size XS-4XL PFAS-free. Quality: 899: Cantex Terry, 290 g/m², LOI: 26,5% Round neck. Heat sealed reflective stripes for greater comfort. Colour: 55 yellow

ELIM: 8,3 cal/cm² EBT: 9,3

Size: XS-4XL

cal/cm²

Size XS-4XL

EN 1149-5

Quality: 864: Outback J220, 225 g/m², LOI: 26,6%

EN ISO 20471 CL.3

591192 FLAME RETARDANT BOXER SHORTS Non-Metal and Inherent Flame Retardant boxer shorts. The boxer shorts are made of a soft tricot with 20% recycled cotton. PFAS-free.

RIC

T L EG I S L

index 3 AT

Elasticated waist. Medium waist height, normal leg length.

Colour: 03 navy

EN 1149-5

508789 FLAME RETARDANT LONG SLEEVES T-SHIRT Size: XS-4XL

’S

EN ISO 14116

O R AT E P F

Size XS-4XL Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves Quality: 924: Cantex JL, 210 g/m², EN ISO 11612 A1+A2 B1 C1 F1, and 20% recycled cotton. PFAS-free.

EN ISO 11612 A1+A2 B1 C1 F1

4,3stripes cal/cm², EBT: 4,5 cal/cm² Round IEC neck.61482-1-1, Heat sealed ELIM: reflective for greater comfort.

EN 61482-2

Colour: 55 yellow

APC 1 ELIM: 3,9 cal/cm² EBT: 4,6

Size: XS-4XL

cal/cm²

Size XS-4XL

EN 1149-5

Quality: 895: Cantex Jersey AT, 180 g/m², LOI: 26,0%

EN ISO 20471 CL.3 TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

TOPS

508289 FLAME RETARDANT LONG SLEEVES T-SHIRT

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves. PFAS-free and 20% recycled cotton.

EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 cal/cm² EN EN 1149-5 ISO 14116 index 3 EN ISO 20471 CL.2* EN 1149-5 EN ISO 20471 TRANEMO SKINSAFE CL.3

Round neck. Heat sealed reflective stripes for greater comfort. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with 20% recycled Colour: 94 yellow/navy cotton. PFAS-free. Size: XXS-4XL

508689 FLAME RETARDANT T-SHIRT

Round neck. Heat sealed reflective stripes for greater comfort. *The garment Size XXS-4XL has a combined certification and is approved for EN ISO 20471 CL.3 when Quality: 895: Cantex Jersey AT, 180 g/m², LOI: 26,0% worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.2. Colour: 55 yellow

CL.2* (XS-S)

Size: XS-4XL Size XS-4XL Quality: 895: Cantex Jersey AT, 180 g/m², EN ISO 11612 A1+A2 B1

C1 F1, EN 61482-1-2 APC 1, IEC 61482-1-1 ELIM 3,9 cal/cm² EBT: 4,6 cal/cm², LOI: 26,0%

508589 FLAME RETARDANT SWEATSHIRT Non-Metal and Inherent Flame Retardant Hi-Vis sweatshirt with round neck. PFAS-free and 20% recycled cotton.

RIC

T L EG I S L

A1+A2 B1 C2 F2 AT

’S

EN ISO 11612

O R AT E P F

EN 61482-2 APC 1 ELIM: 8,6 cal/cm² EBT: 11,0 cal/cm² EN EN 1149-5 ISO 11612 A1+A2 B1 C1 F1 EN ISO 20471 EN 61482-2 CL.2* APC 1 ELIM: 3,9 cal/cm² EBT: 4,6 TRANEMO cal/cm² SKINSAFE

Knitted cuffs and waistband. Heat sealed reflective stripes for greater comfort. *Size XS has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.2. Size S-4XL has a combined Non-Metal Flame T-shirtCL.3 with when long sleeves and certificationand andInherent is approved forRetardant EN ISO 20471 worn together increased visibility. 20% recycled cotton. PFAS-free. with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471

637289 FLAME RETARDANT LONG SLEEVES T-SHIRT

CL.1 orneck. CL.2.Ribbed sleeves. Heat sealed reflective stripes for greater Round Colour: 94 yellow/navy comfort. Size: XXS-4XL Colour: 94 yellow/navy Size XXS-4XL Size: XS-4XL Size XS-4XL Quality: 899: Cantex Terry, 290 g/m², LOI: 26,5%

EN 1149-5

Quality: 895: Cantex Jersey AT, 180 g/m², Fluorescent EN ISO 20471,

TRANEMO SKINSAFE

LOI: 26,0%

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

TOPS

508486 FLAME RETARDANT LONG SLEEVES T-SHIRT

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves. PFAS-free.

EN ISO 11612 A1+A2 B1 C1 F1

Round neck. Heat sealed reflective stripes for greater comfort.

EN 61482-2

Colour: 55 yellow

APC 1 ELIM: 8,3 cal/cm² EBT: 9,3

Size: XS-4XL 594092 FLAME RETARDANT LONG SLEEVES T-SHIRT

Size XS-4XL Non-Metal and Inherent Flame Retardant t-shirt underwear with long Quality: Outback J220, 225 g/m², cotton. LOI: 26,6% sleeves864: in a soft tricot with 20% recycled PFAS-free.

cal/cm² 1149-5 EN ISO 11612 A1 B1 C1 F1

Round neck and long sleeves.

EN ISO 20471 IEC 61482-2 CL.3 CL.1

Colour: 03 navy

ARC_RATING: 7,0 cal/cm²

Size: XS-3XL; 5XL; 7XL Size XS-3XL; 5XL; 7XL

EN 1149-5

Quality: 920: Cantex JX, 235 g/m², LOI: 30,1%

TRANEMO SKINSAFE

508789 FLAME RETARDANT LONG SLEEVES T-SHIRT Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with long sleeves and 20% recycled cotton. PFAS-free.

RIC

T L EG I S L

’S

O R AT E P F

A1+A2 B1 C1 F1

Round neck. Heat sealed reflective stripes for greater comfort.

EN 61482-2

Colour: 55 yellow

EN ISO 11612

APC 1 ELIM: 3,9 cal/cm² EBT: 4,6

594789 FLAME RETARDANT LONG SLEEVES T-SHIRT Size: XS-4XL

Size XS-4XL Non-Metal and Inherent Flame Retardant T-shirt with long sleeves in a soft Quality: 895: Cantex Jersey AT, 180 g/m², LOI: 26,0% single jersey. PFAS-free.

cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 20471 IEC 61482-2 CL.3 CL.1

Round neck. Knitted cuffs. Colour: 03 navy Size: XS-4XL

TRANEMO SKINSAFE EN 1149-5

Size XS-4XL Quality: 895: Cantex Jersey AT, 180 g/m², LOI: 26,0%

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

TOPS

508689 FLAME RETARDANT T-SHIRT

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant Hi-Vis T-shirt with 20% recycled cotton. PFAS-free.

EN ISO 14116 index 3 EN 1149-5

Round neck. Heat sealed reflective stripes for greater comfort. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.2. Soft and Non-Metal and Inherent Flame Retardant Hi-Vis Colour: 55comfortable, yellow sweatshirt with a short zip in front. PFAS-free and 20% recycled cotton. Size: XS-4XL

508889 FLAME RETARDANT HALF ZIP SWEATSHIRT

EN ISO 20471 CL.3 CL.2* (XS-S) EN ISO 11612 A1+A2 B1 C2 F2

ELIM: 8,6 cal/cm² EBT: 11,0

Chest pocket with flap, ribbed sleeves and hem. Heat sealed reflective Size XS-4XL stripes for greater comfort. Quality: 895: Cantex Jersey AT, 180 g/m², EN ISO 11612 A1+A2 B1 Colour: 55 yellow

cal/cm²

Size: XS-4XL

EN 61482-2 APC 1

C1 F1, EN 61482-1-2 APC 1, IEC 61482-1-1 ELIM 3,9 cal/cm² EBT: 4,6 cal/cm², LOI: 26,0%

Size XS-4XL

EN 1149-5

Quality: 899: Cantex Terry, 290 g/m², LOI: 26,5%

EN ISO 20471 CL.3 TRANEMO SKINSAFE

637289 FLAME RETARDANT LONG SLEEVES T-SHIRT Non-Metal and Inherent Flame Retardant T-shirt with long sleeves and increased visibility. 20% recycled cotton. PFAS-free.

RIC

T L EG I S L

A1+A2 B1 C1 F1 AT

’S

EN ISO 11612

O R AT E P F

EN 61482-2 APC 1 ELIM: 3,9 cal/cm² EBT: 4,6

Round neck. Ribbed sleeves. Heat sealed reflective stripes for greater comfort. Colour: 94 yellow/navy

508189 FLAME RETARDANT T-SHIRT

Size: XS-4XL Non-Metal and Inherent Flame Retardant High Visibility polo shirt in tricot Size XS-4XL with a cotton finish on the inside for comfort. PFAS-free and 20% recycled Quality: cotton.895: Cantex Jersey AT, 180 g/m², Fluorescent EN ISO 20471,

cal/cm² EN 1149-5 ISO 14116 index 3 TRANEMO SKINSAFE EN 1149-5 *EN ISO 20471 CL.2 CL.1 (XXS-XS)

Round LOI: neck.26,0% Heat sealed reflective stripes for greater comfort. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.2. Colour: 94 yellow/navy Size: XXS-4XL Size XXS-4XL Quality: 895: Cantex Jersey AT, 180 g/m², EN ISO 11612 A1+A2 B1

C1 F1, EN 61482-1-2 APC 1, IEC 61482-1-1 ELIM 3,9 cal/cm² EBT: 4,6 cal/cm², LOI: 26,0%

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

BOTTOMS

582181 FLAME RETARDANT TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis trousers in a light fabric with a comfortable feel and good tear resistance.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm²

Side pockets. Back pockets with pocket flaps. Cargo pocket with flap, concealed D-ring and mobile phone pocket. Ruler pocket and concealed knife button with loop. Shaped knees with adjustable inside kneepad pockets. Contrast stitching. Colour: 94 yellow/navy

EN 1149-5

Size: 30"- 50"R; 32"- 40"T; 30"- 48"S Size C44-64; C146-156; D84-120

EN 13034

Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611

type PB[6]

CL.1, LOI: 29,8%

EN ISO 20471 CL.1 EN ISO 15797 50 WASHES TRANEMO SKINSAFE

583481 FLAME RETARDANT JACKET Non-Metal and Inherent Flame Retardant Hi-Vis industry jacket in a light fabric with a comfortable feel and good tear resistance.

EN ISO 11612 A1+A2 B1 C1 E1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 F1 EN ISO 11611 IEC 61482-2 CL.1 A1+A2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 EN 13034 cal/cm² type PB[6] EN 1149-5 ISO 20471 CL.2* EN ISO 20471 EN ISO 15797 CL.1 50 WASHES

Concealed front zip and press studs. Extended back. Two loops for communication equipment. Right chest pockets with flap, mobile phone pocket and strap for pencils. Left chest pocket with flap. Vertical chest pocket with zip. Sleeve pocket with flap, hidden D-ring and strap for IDNon-Metal and Inherent trousers withcuffs. stretch forinside excellent pocket. Side pockets withFlame flaps.Retardant Adjustable waist and Two fit and increased ensuring full mobility work. certification and pockets. Contrast comfort stitching. *The garment has aat combined

632281 FLAME RETARDANT STRETCH TROUSERS

is approved fly forand EN stretch ISO 20471 when worn Reinforced zonesCL.3 in crotch. Side together pockets. with CargoTranemo pocket with trouserszone or bib 'n'flap brace certified according EN ISOmobile 20471phone CL.1 pocket or CL.2. stretch and with concealed keyringtoholder, with flap. pocket with tool pockets and knife button with loop. Shaped Colour: 94 Ruler yellow/navy kneesXS-4XL with kneepad pockets in HTFR Dobby and stretch zones. Back yoke in Size: stretch. Back pockets with pocket flaps. Back hem in HTFR Dobby. Size XS-4XL Adjustable foot width with press studs. Quality: 811: Tera TX, 260 g/m², LOI: 29,8% Colour: 94 yellow/navy Size: 30"- 50"R; 32"- 40"T; 28"- 48"S Size C44-64; C146-156; D80-120

EN ISO 15797 50 WASHESSKINSAFE TRANEMO TRANEMO SKINSAFE

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8% 852: FR Stretch, 320 g/m²

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

EN ISO 11612

632581 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets. The trousers has stretch for excellent fit and increased comfort ensuring

EN ISO 15797

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

50 WASHES TRANEMO SKINSAFE

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8%

YELLOW HI-VIS COLLECTION

852: FR Stretch, 320 g/m²

BOTTOMS

632581 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN ISO 20471 CL.1

Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets. The trousers has stretch for excellent fit and increased comfort ensuring full mobility at work. Reinforced fly and stretch in crotch. Nail pockets with tool pockets and HTFR Dobby reinforcement. Side pockets. Cargo pocket with stretch zone and flap with concealed D-ring, mobile phone pocket with flap. Ruler pocket with tool pockets and knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby and stretch zones. Back yoke in stretch. Back pockets with pocket flaps. Back hem in HTFR Dobby. Adjustable foot width with press studs. Colour: 94 yellow/navy

EN ISO 15797

Size: 30"- 50"R; 32"- 40"T; 28"- 48"S

50 WASHES

Size C44-64; C146-156; D80-120 TRANEMO SKINSAFE

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8% 852: FR Stretch, 320 g/m²

632181 FLAME RETARDANT STRETCH TROUSERS Non-Metal and Inherent Flame Retardant trousers with stretch for excellent fit and increased comfort ensuring full mobility at work.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5

Reinforced fly and stretch zones in crotch. Side pockets. Cargo pocket with stretch zone and flap with concealed keyring holder, mobile phone pocket with flap. Ruler pocket with tool pockets and knife button with loop. Shaped knees with kneepad pockets in HTFR Dobby and stretch zones. Back yoke in stretch. Back pockets with pocket flaps. Back hem in HTFR Dobby. Adjustable foot width with press studs. Colour: 94 yellow/navy

EN ISO 20471

Size: 30"- 50"R; 32"- 40"T; 28"- 48"S

CL.2

Size C44-64; C146-156; D80-120

EN ISO 15797

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

50 WASHES TRANEMO SKINSAFE

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8% 852: FR Stretch, 320 g/m²

EN ISO 11612

RETARDANT CRAFTSMAN & ELECTRIC ARC PROTECTIVE 632481 FLAMEFLAME RETARDANT STRETCHWORKWEAR TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at

EN ISO 15797

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

50 WASHES

TRANEMO ADVANCED WORKWEAR

TRANEMO SKINSAFE

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 CL.1, EN 13034, LOI: 29,8% 852: FR Stretch, 320 g/m²

BOTTOMS

632481 FLAME RETARDANT CRAFTSMAN STRETCH TROUSERS EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN ISO 11612 1149-5 A1+A2 B1 C1 E3 F1 EN ISO 20471 EN 61482-2 CL.2 APC 1 CL.1 (30"S) ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN ISO 15797 50 WASHES EN 1149-5 TRANEMO SKINSAFE EN ISO 11611 CL.2 A1+A2

Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5%

CL.3

T L EG I S L

885: Cantex Weld, 365 g/m², LOI: 29,0%

TRANEMO SKINSAFE

RIC

Concealed front 32"zip and press studs. Size: 30"- 50"R; 40"T; 28"48"SExtended back. Two loops for communication equipment. Right chest pocket with flap, tool strap and Size C44-64; C146-156; D80-120 concealed D-ring. Left chest pocket with flap. Vertical pocket with zip on left Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m² chest. Side pockets with flap. Adjustable cuffs with press studs. Two inside 811: Tera stitching. TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 pockets. Contrast

Size XS-4XL

EN ISO 20471

503588 FLAME RETARDANT JACKET

852: FR Stretch, 320 g/m² Size: XS-4XL

type PB[6]

Reinforced fly and stretch in crotch. Nail pockets with tool pockets and HTFR Dobby reinforcement. Side pockets. Cargo pocket with stretch zone and flap with concealed D-ring, mobile phone pocket with flap. Ruler pocket PFAS-free and Inherent Flame Retardant Hi-Vis jacketknees with sleeves and with tool pockets and knife button with loop. Shaped with kneepad front in Cantex Weld andand back in Cantex Stretch. Cantex Stretch Back provides pockets in HTFR Dobby stretch zones. Back yoke in stretch. the jacket with flexibility gives you of movement withfoot high pockets with pocket flaps.and Back hem in freedom HTFR Dobby. Adjustable width levels of comfort, with press studs. while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Colour: 94 yellow/navy

CL.1, EN 13034, LOI: 29,8% Colour: 94 yellow/navy

EN 13034

Non-Metal and Inherent Flame Retardant Hi-Vis trousers with nail pockets and stretch for excellent fit and increased comfort ensuring full mobility at work.

502088 FLAME RETARDANT TROUSERS

’S

O R AT E P F

EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1+A2

Front pockets. Hip pockets with flap. Cargo pocket with flap, mobile phone pocket and concealed D-ring for ID-pocket. Ruler pocket with flap and reinforced bottom. Kneepad pockets with two different placement levels. Adjustable ankle width with press studs. Reinforced back hem. Contrast stitching. Colour: 94 yellow/navy

EN 13034

Size: 30"- 50"R; 32"- 40"T; 30"- 48"S

type PB[6]

Size C44-64; C146-156; D84-120

EN ISO 20471

Quality: 802: Reinforcing fabric, Barricader EP, 545 g/m²

CL.1 TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

884: Cantex Stretch, 365 g/m², LOI: 29,5% 885: Cantex Weld, 365 g/m², LOI: 29,0%

EN ISO 20471

Size: XS-4XL; M-3XL Tall

CL.3

Size XS-4XL; M-3XL Tall

EN ISO 15797

Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 YELLOW HI-VIS COLLECTION

50 WASHES TRANEMO SKINSAFE

CL.1, LOI: 29,8%

BOTTOMS

582081 FLAME RETARDANT TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit in a light fabric with a comfortable feel and good tear resistance.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN 1149-5 EN 13034

type PB[6]

Size: 30"- 50"R; 32"- 40"T; 30"- 48"S

EN ISO 20471 CL.2

Size C44-64; C146-156; D84-120

EN ISO 15797

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611

50 WASHES TRANEMO SKINSAFE

CL.1, LOI: 29,8%

512293 FLAME RETARDANT WINTER TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis winter trousers with taped seams and quilt lining. Wind and waterproof according to EN 343.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 2 ELIM: 26,0 cal/cm² ATPV: 28,0 cal/cm² EN 1149-5 EN ISO 11611

Removable braces with plastic buckles. High back with fleece lining for extra protection. Loops in waist. Side pockets with zip. Front pockets with flaps and D-ring in the right pocket. Inside kneepad pockets. Concealed two-way zip in legs. Snow barrier in legs and adjustable ankle width. *The trousers are tested in a 3 layer system together with basic underwear and jacket 5101 93, 5109 93, 5118 94 or 5119 94. Tranemo recommends underwear 5930 and 5990. Colour: 94 yellow/navy

CL.1 A1+A2

Size: XS-4XL

EN 13034 type PB[6]

Size XS-4XL

EN ISO 20471

Quality: 054: Lining, quilted FR, 160+80 g/m²

CL.2

893: Lining, Cantex Fleece, 330 g/m²

CL.1 (XS-S)

931: Cantex 240IR, twill PU coated, 260 g/m², EN 343 4:4

EN 343 4.1 *EN 342

EN ISO 11612

RETARDANT SOFTSHELL & ELECTRIC ARCJACKET PROTECTIVE WORKWEAR 514595 FLAMEFLAME RETARDANT Non-Metal, wind and water resistant Inherent Flame Retardant Hi-Vis softshell jacket with very high comfort.

EN ISO 20471

Colour: 94 yellow/navy

CL.2

Size: 30"- 50"R; 32"- 40"T; 34"- 48"S

EN ISO 15797

TRANEMO ADVANCED WORKWEAR

Size C44-64; C146-156; D96-120

50 WASHES

Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 TRANEMO SKINSAFE

CL.1, LOI: 29,8%

BOTTOMS

584181 FLAME RETARDANT BIB 'N' BRACE Non-Metal and Inherent Flame Retardant Hi-Vis bib 'n' brace in a light fabric with a comfortable feel and good tear resistance.

EN ISO 11612 A1+A2 B1 C1 F1 IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² EN ISO 11612 1149-5 A1 B1 C1 F1 EN 61482-2 13034 EN type 2PB[6] APC ELIM: 20,0 cal/cm² ATPV: 21,0 EN ISO 20471 cal/cm² CL.1 EN 1149-5 ISO 15797 50 WASHES **EN ISO 11611 CL.1 A1 SKINSAFE TRANEMO **EN 13034 type PB[6] EN ISO 20471 CL.3

Adjustable braces with hidden fixed lock closing and elastic on the back. Chest pocket with flap and D-ring. Inside pocket. Side pockets. Back pockets with pocket flaps. Cargo pocket with flap and first aid pocket. Ruler pocket and concealed knife button with loop. Shaped knees with adjustable inside Non-Metal and Inherent Flame Retardant shell withafter taped seams kneepad pockets. Long and short sizes - will bejacket amended order. and mesh lining. Windextra and delivery waterproof according EN 343. *To meet the Approximately 5 days time. Contrasttostitching. The jacket is ergonomically shaped for pocket work with raised must arms.be Concealed requirements according to EN 13034, openings covered by a front zipjacket. and double stormflap with press studs. Detachable and adjustable Tera TX hood. Two loops for communication equipment. Chest pockets with zip. Colour: 94 yellow/navy Keyring with zip, one for documents/Ipad with an Size: 30"-holder. 50"R; Two 32"-inside 40"T; pockets 34"- 48"S integrated mobile phone pocket. Inside headset holder. Side pockets with Size C44-64; C146-156; D96-120 zip. Adjustable sleeve width and inside knitted cuffs in sleeves. Drawcord at Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 the bottom of the jacket. HTFR Dobby at the bottom of the jacket and on the 13034, LOI:stripes 29,8% sleeves.CL.1, Heat EN sealed reflective for greater comfort. Fiberfur lining 9128 can be attached. *The garment has a combined certification and is approved for EN ISO 20471 CL.3 when worn together with Tranemo trousers or bib 'n' brace certified according to EN ISO 20471 CL.1 or CL.2. **Hood must be used or removed during welding or work with chemicals.

513594 FLAME RETARDANT SHELL JACKET

CL.2* (XS-S)

Colour: 94 yellow/navy

EN 343

Size: XS-4XL

3.3

Size XS-4XL Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

805: Lining, FR Mesh, 110 g/m² 911: Lining, Tera TX Light, 160 g/m², LOI: 26,7% 943: Mega TX 230IR, 230 g/m², LOI: 25,5%

513294 FLAME RETARDANT SHELL TROUSERS Non-Metal and Inherent Flame Retardant shell trousers with taped seams and mesh lining. Wind and waterproof according to EN 343.

EN ISO 11612 A1 B1 C1 F1 EN 61482-2 APC 2 ELIM: 20,0 cal/cm² ATPV: 21,0 cal/cm² EN 1149-5

Colour: 94 yellow/navy Size: XS-4XL

EN ISO 11611 CL.1 A1

Size XS-4XL

EN 13034

Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m²

type PB[6]

805: Lining, FR Mesh, 110 g/m²

EN ISO 20471

911: Lining, Tera TX Light, 160 g/m², LOI: 26,7%

CL.2

943: Mega TX 230IR, 230 g/m², LOI: 25,5%

CL.1 (XS-S) EN 343 3.3

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

Removable braces with plastic buckles. Loops in waist. Side pockets with flaps. Front pocket with flap and concealed keyring holder. Hip pocket with flap. HTFR-Dobby reinforced knees with inside kneepad pockets. Two-way zip in legs. Snow barrier in legs and adjustable foot width. HTFR-Dobby reinforced back hem. Heat sealed reflective stripes for greater comfort.

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

BOTTOMS

504088 FLAME RETARDANT BIB 'N' BRACE

’S

O R AT E P F

EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² EN 1149-5 EN ISO 11611 CL.2 A1+A2 EN 13034 type PB[6]

PFAS-free and Inherent Flame Retardant Hi-Vis bib 'n' brace with front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the bib 'n' brace with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes. Adjustable braces with hidden plastic buckles and elastic in back. Front zip. Chest pockets, one with flap. Concealed knife buttons. Inside pocket. Adjustable width and loops in waist. Side pockets. Cargo pocket with flap, mobile phone pocket, pencil loop and concealed D-ring. Ruler pocket with flap and reinforced bottom. Kneepad pockets with two different placement levels. Hip pockets with flap. Contrast stitching. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time. Colour: 94 yellow/navy

EN ISO 20471

Size: 30"- 50"R; 32"- 40"T; 34"- 48"S

CL.1

Size C44-64; C146-156; D96-120

TRANEMO SKINSAFE

Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5%

885: Cantex Weld, 365 g/m², LOI: 29,0%

501088 FLAME RETARDANT BOILERSUIT EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 61482-2 APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 cal/cm² ISO 11612 EN 1149-5 A1+A2 B1 C1 F1 EN 11611 IECISO 61482-2 CL.2 APC 1A1+A2 ELIM: 8,1 cal/cm² EBT: 8,7 EN 13034 cal/cm² type PB[6] 1149-5 EN ISO 20471 CL.3 EN 13034 type PB[6]SKINSAFE TRANEMO EN ISO 20471

PFAS-free and Inherent Flame Retardant Hi-Vis boilersuit with sleeves and front in Cantex Weld and back in Cantex Stretch. Cantex Stretch provides the boilersuit with flexibility and gives you freedom of movement with high levels of comfort, while Cantex Weld at the front gives you extra high protection against welding and grinding splashes.

584081 FLAME RETARDANT BIB 'N' BRACE

Concealed front zip and press studs. Two loops for communication Non-Metal and Inherent Flame bib concealed 'n' brace with front zip equipment. Chest pockets with Retardant flaps, tool Hi-Vis strap and D-ring. in a light fabric comfortable feel pockets and goodwith tearflap resistance. Adjustable cuffswith withapress studs. Side and hidden side Adjustable bracespockets with hidden fixedheight lock closing and elastic in back. Front access. Kneepad with two placements. Hip pockets with flap. zip. Chest pockets, oneand withreinforced flap. Concealed buttons.waistband. Inside pocket. Ruler pocket with flap bottom.knife Elasticated Adjustable waist. Side pockets. Right cargo pocket with flap, ruler pocket, Contrast stitching. separate phone pocket, pencil holder and concealed knife button with Colour: 94mobile yellow/navy loop.XS-4XL; Left cargo pocket Size: M-3XL Tallwith flap and concealed D-ring, ruler pocket, first aid pocket and concealed knife button with loop. Shaped knees with adjustable Size XS-4XL; M-3XL Tall inside kneepad pockets. Hip pockets with flap. Long and short sizes - will be Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5% amended after order. Approximately 5 days extra delivery time. Contrast 885: Cantex Weld, 365 g/m², LOI: 29,0% stitching. Colour: 94 yellow/navy

CL.2

Size: 30"- 50"R; 32"- 40"T; 34"- 48"S

EN ISO 15797

Size C44-64; C146-156; D96-120

50 WASHES

Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 TRANEMO SKINSAFE

23 EN ISO 11612

CL.1, LOI: 29,8%

RETARDANT BIB & ELECTRIC ARC PROTECTIVE WORKWEAR 584181 FLAMEFLAME RETARDANT 'N' BRACE Non-Metal and Inherent Flame Retardant Hi-Vis bib 'n' brace in a light fabric with a comfortable feel and good tear resistance.

TRANEMO ADVANCED WORKWEAR

BOTTOMS

581181 FLAME RETARDANT BOILERSUIT EN ISO 11612 A1+A2 B1 C1 F1 EN 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 13034 EN 61482-2 type PB[6] APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 EN ISO 20471 cal/cm² CL.3 EN 1149-5 ISO 15797 50 WASHES EN ISO 11611 CL.2 A1+A2SKINSAFE TRANEMO EN 13034 type PB[6]

Non-Metal and Inherent Flame Retardant Hi-Vis boilersuit made of the light and durable Tera TX fabric. The boilersuit is suitable for work where flame protection, protection against Electric Arc and High Visibility are required. Concealed 2-way zip and press stud closing. Two loops for communication 504088 FLAME RETARDANT BIB 'N' BRACE equipment. Two loops for attaching ID-pocket. Vertical chest pockets with PFAS-free and Inherent Flame Retardant bib 'n' brace with frontcuffs. in zip. Adjustable waistband. Actionback forHi-Vis free movement. Adjustable Cantex Weld and in Cantex Stretch. Cantex Stretch the inside bib Side pockets withback hidden side access. Shaped knees withprovides adjustable 'n' brace with flexibility and gives freedom movement withRuler high pocket kneepad pockets. Hip pockets withyou flap. Cargo of pocket with flap. levels of comfort, while Cantex at the front gives you extra high with flap. Zip in legs from kneeWeld to ankle. Contrast stitching. protection against welding and grinding splashes. Colour: 94 yellow/navy Adjustable braces with hidden plastic buckles and elastic in back. Front zip. Size: XS-4XL; M-3XL Tall Chest pockets,M-3XL one with Size XS-4XL; Tallflap. Concealed knife buttons. Inside pocket. Adjustable width and loops in waist. Side pockets. Cargo pocket with flap, Quality: 811: Tera TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 mobile phone pocket, pencil loop and concealed D-ring. Ruler pocket with CL.1, LOI: 29,8% flap and reinforced bottom. Kneepad pockets with two different placement levels. Hip pockets with flap. Contrast stitching. Long and short sizes - will be amended after order. Approximately 5 days extra delivery time. Colour: 94 yellow/navy

EN ISO 20471

Size: 30"- 50"R; 32"- 40"T; 34"- 48"S

CL.1

Size C44-64; C146-156; D96-120

TRANEMO SKINSAFE

Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5%

885: Cantex Weld, 365 g/m², LOI: 29,0%

582081 FLAME RETARDANT TROUSERS Non-Metal and Inherent Flame Retardant Hi-Vis trousers with a wide fit in a light fabric with a comfortable feel and good tear resistance.

RIC

T L EG I S L

A1+A2 B1 C1 F1 AT

’S

EN ISO 11612

O R AT E P F

IEC 61482-2 APC 1 ELIM: 8,1 cal/cm² EBT: 8,7 cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 E3 F1 EN 13034 EN 61482-2 type PB[6] APC 1 ELIM: 12,0 cal/cm² EBT: 16,0 EN ISO 20471 cal/cm² CL.2 EN 1149-5 ISO 15797 50 WASHES EN ISO 11611 CL.2 A1+A2SKINSAFE TRANEMO EN 13034

Flame Retardant Hi-Vis trousers with contrast stitching. Side pockets. Back pockets with pocket flaps. Right cargo pocket with flap, ruler pocket, separate mobile phone pocket, pencil holder and concealed knife button with loop. Left cargo pocket with flap and concealed D-ring, ruler pocket, first aid PFAS-free Inherentknife Flame Retardant Hi-Vis boilersuit with sleeves and pocket andand concealed button with loop. Shaped knees with kneepad front in Cantex Weld and Back back hem in Cantex Stretch. Cantex Stretchfoot provides pockets in HTFR Dobby. in HTFR Dobby. Adjustable width the withContrast flexibility and gives you freedom of movement with high withboilersuit press studs. stitching. levels while Cantex Weld at the front gives you extra high Colour: of 94comfort, yellow/navy protection against welding Size: 30"- 50"R; 32"40"T;and 30"-grinding 48"S splashes.

501088 FLAME RETARDANT BOILERSUIT

Concealed front zip and press studs. Two loops for communication Size C44-64; C146-156; D84-120 equipment. Chest pockets with flaps, tool strap and concealed D-ring. Quality: 804: Reinforcing fabric, HTFR Dobby, 295 g/m² Adjustable cuffs with press studs. Side pockets with flap and hidden side Terapockets TX, 260 g/m², EN ISO 11612 E1, EN ISO 11611 access.811: Kneepad with two height placements. Hip pockets with flap. CL.1, with LOI:flap 29,8% Ruler pocket and reinforced bottom. Elasticated waistband. Contrast stitching. Colour: 94 yellow/navy

type PB[6]

Size: XS-4XL; M-3XL Tall

EN ISO 20471

Size XS-4XL; M-3XL Tall

CL.3

Quality: 884: Cantex Stretch, 365 g/m², LOI: 29,5% TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

885: Cantex Weld, 365 g/m², LOI: 29,0%

YELLOW HI-VIS COLLECTION

PFAS FREE CLOTHING At Tranemo, we recognize that fluorinated chemicals are a challenge for both people and the environment. Because of this, we made an active decision long ago to take the necessary steps to eliminate harmful chemicals in our entire production chain in the future. Tranemo does not use the harmful PFOS and PFOA (C8-listed) chemicals, which are among the critical chemicals mentioned in the press. These chemicals have long been on our ’Restricted Substance List’ and are not used in the production of our products.

WHAT IS PFAS AND WHERE IS IT USED? Perfluoroalkyl substances (PFAS) are a chemical family consisting of nearly 5,000 industrially produced chemicals and have been used in the textile industry for a long time to protect textiles from moisture, grease, and dirt. However, these substances degrade extremely slowly and therefore have a negative impact on the environment and health. These chemicals provide properties such as non-stick, water-repellent, and anti-grease for many types of products, including cosmetics, food packaging, frying pans, outdoor equipment, and firefighting foam. We see enormous potential in the newly developed technology that eliminates fluorocarbon treatment without affecting the overall protection level of workwear. We are now part of the Swedish nonprofit organization ChemSec’s ’No to PFAS’ movement to influence how chemical regulations

RIC

T L EG I S L

’S

are implemented in practice.

O R AT E P F

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

FLAME RETARDANT

FUNCTIONAL UNDERWEAR

LONG PRODUCT LIFESPAN

TEMPERATURE REGULATING Keeps you cool when it’s hot and warm when it’s cold

LIGHTWEIGHT Thin and flexible fabric with a lightweight of 200 g/m2

HIGH ELASTICITY AND BREATHABILITY ODOR RESISTANT

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

MERINO WOOL PROTECTING YOUR SKIN Merino underwear protects you from cold, heat, flame and can help with injuries associated with Electric Arc. If your jacket and trousers are Anti-Static, Merino underwear is the perfect skin protecting layer to support their function. Our range of flame retardant underwear is available in two different fabric types: modacrylic/cotton and merino wool/viscose. Underwear made from the cotton blend is very soft, comfortable, and provides an effective first layer of protection. Merino wool underwear is dirt-repellent, warm even when damp, odor-resistant, and naturally flame retardant. Tranemo underwear always ensures comfort and reliable protection, starting at the skin level. All our flame retardant underwear meets various certification requirements, such as EN ISO 11612, IEC 61482-2, EN 1149-5, EN ISO 11612, and EN ISO 14116.

NATURALLY FLAME RETARDANT When working in cold conditions with varying degrees of intensity, the extra thin Merino wool fibres ensures your protection is comfortable to wear. The garments also help to eliminate bad odour and the wool keeps you warm, even when wet.

FROM THE INSIDE OUT They say a chain is only as strong as its weakest link. That’s why we recommend using Inherent Flame Retardant clothing from the inside out. You then avoid the risk that the cotton could burn, polyester could melt or that metal could transmit electrical current and heat.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

UNDERWEAR

592092 FLAME RETARDANT SHORT ZIP TURTLENECK

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant turtleneck underwear in a soft tricot with 20% recycled cotton. PFAS-free.

EN ISO 11612 A1 B1 C1 F1

Concealed zip in collar. Long sleeves.

IEC 61482-2

Colour: 03 navy

CL.1 ARC_RATING: 7,0 cal/cm²

Size: XS-3XL Size XS-3XL

EN 1149-5

Quality: 920: Cantex JX, 235 g/m², LOI: 30,1%

TRANEMO SKINSAFE

593092 FLAME RETARDANT LONG JOHNS Non-Metal and Inherent Flame Retardant long Johns in a soft tricot with 20% recycled cotton. PFAS-free.

RIC

T L EG I S L

’S

O R AT E P F

A1 B1 C1 F1

Elasticated waist.

IEC 61482-2

Colour: 03 navy

EN ISO 11612

CL.1 ARC_RATING: 7,0 cal/cm²

594092 FLAME RETARDANT LONG SLEEVES T-SHIRT Size: XS-3XL; 5XL; 7XL

Size XS-3XL; 5XL; 7XL Non-Metal and Inherent Flame Retardant t-shirt underwear with long Quality: Cantex 235 g/m², LOI: cotton. 30,1%PFAS-free. sleeves920: in a soft tricotJX, with 20% recycled

EN 1149-5 EN ISO 11612 A1 B1 C1 F1 TRANEMO SKINSAFE IEC 61482-2 CL.1 ARC_RATING: 7,0 cal/cm²

Round neck and long sleeves. Colour: 03 navy Size: XS-3XL; 5XL; 7XL Size XS-3XL; 5XL; 7XL

EN 1149-5

Quality: 920: Cantex JX, 235 g/m², LOI: 30,1%

TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

EN ISO 11612

594789 FLAME RETARDANT LONG SLEEVES T-SHIRT Non-Metal and Inherent Flame Retardant T-shirt with long sleeves in a soft single jersey. PFAS-free.

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

UNDERWEAR

631590 FLAME RETARDANT T-SHIRT LONG SLEEVES

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant long sleeved T-shirt underwear in Merino wool/FR viscose tricot. PFAS-free.

EN ISO 11612 A1+A2 B1 C1 F1

Round neck. Extended back.

IEC 61482-2

Colour: 07 black

APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3

Size: XS-4XL

cal/cm²

Size XS-4XL

EN 1149-5

Quality: 901: Merino RX, 200 g/m², LOI: 27,7%

TRANEMO SKINSAFE

631290 FLAME RETARDANT LONG JOHNS Non-Metal and Inherent Flame Retardant long Johns in Merino wool/FR viscose tricot. PFAS-free.

RIC

T L EG I S L

’S

O R AT E P F

A1+A2 B1 C1 F1

Elasticated waist.

IEC 61482-2

Colour: 07 black

EN ISO 11612

APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3

631990 FLAME RETARDANT TURTLENECK Size: XS-4XL

Size XS-4XL Non-Metal and Inherent Flame Retardant turtleneck underwear in Merino Quality: Merino 200 g/m², LOI: 27,7% wool/FR901: viscose tricot.RX, PFAS-free.

cal/cm² 1149-5 EN ISO 11612 A1+A2 B1 C1 F1

Concealed zip in collar. Extended back.

IEC 61482-2 TRANEMO SKINSAFE APC 1

Colour: 07 black

ELIM: 4,6 cal/cm² ATPV: 5,3

Size: XS-4XL

cal/cm²

Size XS-4XL

EN 1149-5

Quality: 901: Merino RX, 200 g/m², LOI: 27,7%

TRANEMO SKINSAFE

EN ISO 11612

RETARDANT CARDIGAN & ELECTRIC ARC PROTECTIVE WORKWEAR 633090 FLAMEFLAME RETARDANT Non-Metal and Inherent Flame Retardant cardigan in a heavier weight Merino wool/FR viscose fabric. PFAS-free.

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

UNDERWEAR

633090 FLAME RETARDANT CARDIGAN

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant cardigan in a heavier weight Merino wool/FR viscose fabric. PFAS-free.

EN ISO 11612 A1+A2 B1 C2 D2 E1 F1 IEC 61482-2 APC 1 ELIM: 9,6 cal/cm² EBT: 10,0

Concealed zip closing. Front pockets with flaps. Ribbed cuffs with thumb loops. Colour: 07 black

592092 FLAME RETARDANT SHORT ZIP TURTLENECK

Size: XXS-4XL Non-Metal and Inherent Flame Retardant turtleneck underwear in a soft Size XXS-4XL tricot with 20% recycled cotton. PFAS-free. Quality: 903: Merino TX, 360 g/m², LOI: 28,7% Concealed zip in collar. Long sleeves.

cal/cm² 1149-5 EN ISO 11612 A1 B1 C1 F1 IEC 61482-2 TRANEMO SKINSAFE CL.1 ARC_RATING: 7,0 cal/cm²

Colour: 03 navy Size: XS-3XL Size XS-3XL

EN 1149-5

Quality: 920: Cantex JX, 235 g/m², LOI: 30,1%

RIC

T L EG I S L

TRANEMO SKINSAFE

593092 FLAME RETARDANT LONG JOHNS

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant long Johns in a soft tricot with 20% recycled cotton. PFAS-free.

EN ISO 11612 A1 B1 C1 F1

Elasticated waist.

IEC 61482-2

Colour: 03 navy

CL.1 ARC_RATING: 7,0 cal/cm²

Size: XS-3XL; 5XL; 7XL Size XS-3XL; 5XL; 7XL

EN 1149-5

Quality: 920: Cantex JX, 235 g/m², LOI: 30,1%

TRANEMO SKINSAFE

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

UNDERWEAR

631290 FLAME RETARDANT LONG JOHNS

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant long Johns in Merino wool/FR viscose tricot. PFAS-free.

EN ISO 11612 A1+A2 B1 C1 F1

Elasticated waist.

IEC 61482-2

Colour: 07 black

APC 1 ELIM: 4,6 cal/cm² ATPV: 5,3

Size: XS-4XL

cal/cm²

Size XS-4XL

EN 1149-5

Quality: 901: Merino RX, 200 g/m², LOI: 27,7%

RIC

T L EG I S L

TRANEMO SKINSAFE

591192 FLAME RETARDANT BOXER SHORTS

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant boxer shorts. The boxer shorts are made of a soft tricot with 20% recycled cotton. PFAS-free.

EN ISO 14116 index 3

Elasticated waist. Medium waist height, normal leg length. Colour: 03 navy

EN 1149-5

Size: XS-4XL Size XS-4XL Quality: 924: Cantex JL, 210 g/m², EN ISO 11612 A1+A2 B1 C1 F1,

IEC 61482-1-1, ELIM: 4,3 cal/cm², EBT: 4,5 cal/cm²

EN ISO 11612

RETARDANT NECK & ELECTRIC ARC PROTECTIVE WORKWEAR 599900 FLAMEFLAME RETARDANT PROTECTION Non-Metal and Inherent Flame Retardant neck protection that provides good protection against exposure of Electric Arc. 20% recycled cotton.

TRANEMO ADVANCED WORKWEAR

RIC

T L EG I S L

ACCESSORIES

599900 FLAME RETARDANT NECK PROTECTION

’S

O R AT E P F

EN ISO 11612 A1+A2 B1 C1 F1

Non-Metal and Inherent Flame Retardant neck protection that provides good protection against exposure of Electric Arc. 20% recycled cotton. PFAS-free. The neck protection also prevents molten metal getting under the collar. It can be 'pulled' up and used as a balaclava which then gives protection to the ears and open skin/hair. To obtain protection to the front of the face, pull up the neck protection from the front. The neck protection can also be worn as a neckerchief and protects against cold.

EN 1149-5

Colour: 03 navy Size: One size Size One size Quality: 051: Cantex Light Rib, 230 g/m², ELIM: 5,1 cal/cm², EBT: 6,3

RIC

T L EG I S L

cal/cm²

630790 FLAME RETARDANT WOOL HAT

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant cap to be used under a helmet, in a thinner tricot in soft Merino wool and FR viscose. PFAS-free.

EN ISO 14116 index 3

Colour: 07 black Size: One size

EN 1149-5

Size One size Quality: 902: Merino BX, 250 g/m², LOI: 28,5%, EN ISO 11612 A1+A2

B1 C1 F1, EN 61482-1-2 CL.1, ELIM: 6,3 cal/cm², ATPV: 7,6 cal/cm²

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

32 EN ISO 11612

630890 FLAME RETARDANT BALACLAVA Non-Metal and Inherent Flame Retardant balaclava in soft tricot Merino wool and FR viscose. PFAS-free.

YELLOW HI-VIS COLLECTION

RIC

T L EG I S L

ACCESSORIES

630890 FLAME RETARDANT BALACLAVA

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant balaclava in soft tricot Merino wool and FR viscose. PFAS-free.

EN ISO 11612 A1+A2 B1 C1 F1

The balaclava offers good protection for chin, neck and face. Longer front. Colour: 07 black

EN 1149-5

Size: One size Size One size Quality: 902: Merino BX, 250 g/m², LOI: 28,5%, EN 61482-1-2 CL.1,

RIC

T L EG I S L

ELIM: 6,3 cal/cm², ATPV: 7,6 cal/cm²

599592 FLAME RETARDANT BALACLAVA

’S

O R AT E P F

Non-Metal and Inherent Flame Retardant balaclava in tricot with 20% recycled cotton. PFAS-free.

EN ISO 11612 A1 B1 C1 F1

The balaclava offers good protection for chin, neck and face. Longer front. Colour: 03 navy

EN 1149-5

Size: One size Size One size Quality: 920: Cantex JX, 235 g/m², EN 61482-1-2 CL.1, Arc Rating:

7,0 cal/cm², LOI: 30,1%

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR 902000 KNEEPADS Standard kneepads Fits all Tranemo kneepad pockets. Will be delivered without packaging.

TRANEMO ADVANCED WORKWEAR

ACCESSORIES

902000 KNEEPADS Standard kneepads Fits all Tranemo kneepad pockets. Will be delivered without packaging. Colour: 06 grey Size: One size Size One size

RIC

T L EG I S L

Quality: : 100% EVA, EN ISO 11612 A1

905400 FLAME RETARDANT SOCK

’S

O R AT E P F

Inherent Flame Retardant work sock with 20% recycled cotton. PFAS-free. EN ISO 14116

Colour: 03 navy

index 3

Size: 34-36; 37-39; 40-42; 43-45; 46-48; 49-51 Size 34-36; 37-39; 40-42; 43-45; 46-48; 49-51

EN 1149-5

Quality: 42% modacrylic / 28% cotton / 22% polyamide / 6% elastane /

2% antistatic

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

EN ISO 14116

907500 FLAME RETARDANT SOCK Heavyweight Inherent Flame Retardant winter sock in wool/FR viscose. PFAS-free.

YELLOW HI-VIS COLLECTION

ACCESSORIES

907500 FLAME RETARDANT SOCK Heavyweight Inherent Flame Retardant winter sock in wool/FR viscose. PFAS-free.

EN ISO 14116 index 3

Colour: 07 black Size: 37-39; 40-42; 43-45; 46-48

EN 1149-5

Size 37-39; 40-42; 43-45; 46-48 Quality: 45% wool / 35% FR viscose / 15% polyamide / 3% antistatic /

2% elastane

907900 FLAME RETARDANT WOOL TERRY SOCK Heavyweight Inherent Flame Retardant sock in wool terry. PFAS-free. EN ISO 14116

Colour: 07 black

index 3

Size: 37-39; 40-42; 43-45; 46-48 Size 37-39; 40-42; 43-45; 46-48

EN 1149-5

Quality: 45% wool / 35% FR viscose / 15% polyamide / 3% antistatic /

2% elastane

RETARDANT & ELECTRIC ARC ARC PROTECTIVE WORKWEAR RG0004 FLAMEFLAME RETARDANT GLOVES 16 Glove with high Electric Arc protection. (13-4HFR-AF)

EN 407

Optimised for high Electric Arc risks. Perfect in tough working conditions

TRANEMO ADVANCED WORKWEAR

ARC FLASH GLOVES WITH FLAME RETARDANT PROTECTION The Eureka glove is a long-awaited solution for those who work in an Electric Arc risk environment and have missed a glove with mobility and feeling, combined with high protection.

cur during an arc flash. The gloves help to absorb and reduce the thermal energy generated by an arc flash, and protect against direct contact with flames and hot surfaces. There are very few guidelines when it comes to the use of arc flash gloves. We have compiled some important points about flame-retardant arc flash gloves:

The importance of the right protective clothing cannot be emDo not mix PPE and ordinary non-FR gloves.

phasized enough. It can be seen that the main focus naturally falls on clothing and safety shoes, while many neglect one of the most exposed areas of the body; namely our hands!

The hands are the most vulnerable part of the body!

The whole body is exposed during risky work, but our hands

Use dry gloves! Moist or wet gloves can cause steam (steam the hand) and will reduce the protection by up to 50%.

are usually closest to the source. An arc flash produces radiant heat that can burn the skin, and can reach up to 10,000°C. Today, ordinary assembly gloves are often used instead of flame-retardant gloves. Ordinary assembly gloves offer no pro-

It is a good idea to bring an extra pair of gloves in case one pair becomes wet or dirty during the workday.

tection, these will ignite and melt into the skin in case of an accident. If you need to use flame retardant clothing, there is no good reason not to use flame retardant gloves.

Use the right size!

The hands are one of the most vulnerable parts of the body,

Let other protective workwear overlap the gloves at the wrist, or let the glove overlap the cuff of the top.

as they are often involved in work tasks that involve handling electrical components, tools, and cables. In the event of an electrical arc flash, intense heat energies and arc discharges

Worn gloves provide reduced protection.

can be released, causing burns, explosions, and other serious injuries. Therefore, it is crucial to have the right protection for

Use clean protective gloves! Even if the gloves are flame retardant, oil and dirt can burn the glove.

the hands in the form of appropriate gloves. Good arc flash gloves are specifically designed to withstand

Do not compare flame retardant protective gloves with traditional assembly gloves.

the thermal effects of an arc flash and minimize the risk of burns. They must meet stringent standards and requirements, including resistance to arc flash energy, flame retardant prop-

Good arc flash gloves should be certified according to relevant standards such as IEC 61482-1 and NFPA 70E to ensure their quality and compliance with safety standards.

erties, and mechanical abrasion resistance. By wearing gloves, you can create a protective barrier between your hands and the potentially dangerous conditions that oc-

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

PROTECTIVE AREAS (ATPV) PRINT BACK SIDE Provides highest protection by reflecting radiation: ATPV 40 cal/cm²

PARTIALLY PRINTED SURFACES Partial protection through printed surface treatment. Protection estimated between 20-35 cal/cm²

FR ARC PALM Provides extra protection: ATPV 30 cal/cm²

EXTRA LONG RIB EDGE ATPV 16 cal/cm²

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO SKINSAFE

TRANEMO ADVANCED WORKWEAR

ARC FLASH GLOVES

4650410 ARC FLASH GLOVES,GLOVES HRC 4, 45.0 CAL/CM2 RG0005 FLAME RETARDANT ARC 40 BSD BILDUNGS Flame Retardant glove with very high Electric Arc protection. (Eureka 13-4

633090 FLAME RETARDANT CARDIGAN

HAF50) Arc Protection gloves HRC 4 from the BDS permits the users to work with parts

EN 407 EN 407 4122XX 41324X EN ISO 38811612 388 EN 2121

3X43E B1 C2 D2 E1 F1 A1+A2 IEC IEC 61482-1-2: 2007 ANSI61482-2 CUT 2 45.0 APC A5 1CAL/CM ELIM: 9,6 cal/cm² EBT: 10,0 ASTM F2675 cal/cm² ATPV Palm 42 cal/cm² Back of hand 59 cal/cm² EN 1149-5 IEC 61482-1-2 (Gloves) CL.2 TRANEMO SKINSAFE

Non-Metal and Inherent Flame powerful Retardant cardigan inofaprotective heavier Optimised design toas:withstand arc explosions. Suitableweight for toughest of the voltage. Parts switching operations, inserting plates or Merino viscose fabric. PFAS-free. working conditions with highapprox. risk of 350 heat,mm. flame and Electric High take out wool/FR of NH fuses. Length: Weight: approx. Arc 260risks. g. performance cut resistance. Concealed zipinclosing. Front pockets with flaps. Ribbed cuffs with thumb Colour: Multi-colour Colour: loops. Size: 1000 multi-colour Size: 8/S-12/XXL Colour: 07 blackleather and fabric Quality: Spezial Size XXS-4XL 8/S-12/XXL Size: Quality: Size XXS-4XL 76% Para aramide /10% fibre glass / 8% modacrylic / 4% Quality: 903: Merino 360 g/m², LOI: elastane / 2%TX, anti-static Back of28,7% hand: 48% modacrylic / 38%

cotton / 10% polyurethane / 2% polyamide / 1% elastane / 1% anti-static Coating: Flame Retardant neoprene based composite

RG0006 FLAME RETARDANT GLOVES ARC 4 Thin Flame Retardant glove with highest levels of dexterity with Electric Arc protection and cut resistance. (Eureka 15-4 HAF4)

EN 407 41XXXX

Optimised for medium Electric Arc risks. Super thin glove with cut resistance.

EN 388 3X31D

Colour: 00 multi-colour

ANSI CUT

3X43E IEC 61482-1-2

Size: 7/XS-11/XL Flame Retardant glove with very high Electric Arc protection. (Eureka 13-4 Size 7/XS-11/XL HAF50) Quality: 55% Para aramide / 21% polyester / 14% fibre glass / 5% Optimised design to withstand powerful arc explosions. Suitable for toughest / 5% Flame workingelastane conditions withanti-static high risk ofCoating: heat, flame andRetardant Electric Arcneoprene risks. High basedincomposite performance cut resistance.

(Gloves) CL.1 ANSI CUT

Colour: 00 multi-colour

Size: 8/S-12/XXL

ASTM F2675

Size 8/S-12/XXL

RG0005 FLAME RETARDANT GLOVES ARC 40

A4 EN 407 ASTM F2675 41324X ATPV Palm 22 cal/cm² Back of hand 5,9 cal/cm² EN 388

ATPV Palm 42 cal/cm² Back of hand 59 cal/cm²

Quality: 76% Para aramide /10% fibre glass / 8% modacrylic / 4%

IEC 61482-1-2

elastane / 2% anti-static Back of hand: 48% modacrylic / 38%

(Gloves) CL.2

cotton / 10% polyurethane / 2% polyamide / 1% elastane / 1% anti-static Coating: Flame Retardant neoprene based composite

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

38 EN 407

RG0006 FLAME RETARDANT GLOVES ARC 4 Thin Flame Retardant glove with highest levels of dexterity with Electric Arc protection and cut resistance. (Eureka 15-4 HAF4)

YELLOW HI-VIS COLLECTION

ARC FLASH GLOVES

RG0005 FLAME RETARDANT GLOVES ARC 40 Flame Retardant glove with very high Electric Arc protection. (Eureka 13-4 HAF50)

EN 407 41324X

Optimised design to withstand powerful arc explosions. Suitable for toughest working conditions with high risk of heat, flame and Electric Arc risks. High performance in cut resistance.

EN 388 3X43E ANSI CUT

Colour: 00 multi-colour

Size: 8/S-12/XXL

ASTM F2675

Size 8/S-12/XXL

RG0004 FLAME RETARDANT GLOVES ARC 16

ATPV Palm 42 cal/cm² Back of hand 59 cal/cm² EN 407 IEC 61482-1-2 41324X (Gloves) CL.2 EN 388 3X43E

Glove Electric Arc /10% protection. Quality:with 76%high Para aramide fibre(13-4HFR-AF) glass / 8% modacrylic / 4% Optimised for high Electric Arc risks. Perfect in tough working conditions elastane / 2% anti-static Back of hand: 48% modacrylic / 38% with high heat, flame and Electric Arc risks. High performance in cut cotton / 10% polyurethane / 2% polyamide / 1% elastane / 1% resistance. PPE Level 2 on glove, PPE 3 protection on the most exposed anti-static Coating: Flame Retardant neoprene based composite areas.

ANSI CUT

Colour: 00 multi-colour

Size: 7/XS-12/XXL

ASTM F2675

Size 7/XS-12/XXL

ATPV Palm 30 cal/cm² Back of hand 16 cal/cm² Print 40 cal/cm²

Quality: 76% Aramid / 10% fibreglass / 8% modacrylic / 4% elastane /

IEC 61482-1-2

2% anti-static

(Gloves) CL.2

Coating: Flame Retardant neoprene based composite Lining: 79% FR viscose / 10% Aramid / 10% polyamide / 1% anti-static

RG0006 FLAME RETARDANT GLOVES ARC 4 Thin Flame Retardant glove with highest levels of dexterity with Electric Arc protection and cut resistance. (Eureka 15-4 HAF4)

EN 407 41XXXX

Optimised for medium Electric Arc risks. Super thin glove with cut resistance.

EN 388 3X31D

Colour: 00 multi-colour

ANSI CUT

Size: 7/XS-11/XL

Size 7/XS-11/XL

ASTM F2675

Quality: 55% Para aramide / 21% polyester / 14% fibre glass / 5%

ATPV Palm 22 cal/cm² Back of hand 5,9 cal/cm²

elastane / 5% anti-static Coating: Flame Retardant neoprene

IEC 61482-1-2

based composite

(Gloves) CL.1

RG0009 FLAME RETARDANT GLOVES ARC 10 Ultra thin Flame Retardant glove with unique comfort and Electric Arc protection. (Eureka 18-2 HAF-10)

EN 407 4121XX

Fine dexterity due to ultra thin material. Optimised for medium Electric Arc risks.

EN 388 2X31B

Colour: 00 multi-colour

ANSI CUT

Size: 7/XS-12/XXL

Size 7/XS-12/XXL

ASTM F2675

Quality: 56% Para aramid / 34% FR polyester / 10% Elastane Coating:

ATPV 9.7 cal/cm² IEC 61482-1-2

Chloroprene composite

(Gloves) CL.1

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

UNDERSTAND THE IMPORTANCE OF FACE AND EYE PROTECTION. Helmets for electrical work are classified as Class E or Class G. Class C helmets are not intended for use by electricians working with live electrical installations. Protection Against Arc Flash Radiation: An electric arc can produce intense light and arc flash radiation, which can be harmful to the eyes. Some arc flash helmets are equipped with protective visors or screens that can block harmful UV radiation and reduce eye glare.

Class C helmets are designed for non-electrical work because the helmet is conductive and can be made from conductive materials such as an alloy. Class E helmets are intended for use by electricians working with high-voltage conductors. These helmets are tested up to 20,000 volts and are marked with the label ’Class E’ on the inside of the helmet. Class E helmets are made as solid helmets without air vents. Class G (general) helmets are designed to provide protection against exposure to low-voltage conductors. These helmets are tested to 2200 volts and are designed with ventilation openings to increase comfort and breathability. Class G helmets should only be worn by workers who are not at risk of an arc flash or who do not work on live electrical installations.

It is important to note that arc flash helmets alone are not sufficient to protect against all the risks associated with an arc flash incident. They should be used in conjunction with other personal protective equipment (PPE) such as flame-retardant clothing, including balaclavas, neck gaiters, safety goggles, etc., to achieve complete face and head protection.

WHAT DO ARC FLASH HELMETS PROTECT AGAINST?

WHEN SHOULD ARC FLASH HELMETS BE USED?

Electric arc flash helmets are designed to protect against various hazards and risks associated with an electric arc flash incident. The primary protection features include:

Arc flash helmets should be used in situations where there is a risk of exposure to an electric arc and its potential hazards. These helmets are designed to protect the head and face from thermal injuries, splinters, and other flying materials that may occur during an arc flash incident. Generally, arc flash helmets should be used in the following situations:

Thermal Protection: Arc flash helmets are designed to withstand the intense heat energy generated during an arc flash. They are made from materials that are flame retardant and can withstand high temperatures for short periods. This helps to protect the head and face from thermal injuries such as burns.

When working on electrical systems: If there is a potential risk of an arc flash incident while working on electrical systems such as panels, switchgear, or control cabinets, arc flash helmets should be used to protect the head and face from injuries.

ebris and Impact Protection: During an arc flash inciD dent, explosions can occur, resulting in the ejection of materials, splinters, and flying objects. Arc flash helmets are constructed of hard shell materials that are designed to withstand impacts and protect the head from the penetration of debris and other flying objects.

uring maintenance or repair: When carrying out mainteD nance or repair work on electrical installations or equipment where there is a risk of exposure to an arc flash, arc flash helmets should be worn as part of the personal protective equipment.

Electrical Insulation: Helmets for electric arc flash protection are also designed with electrical insulating properties to reduce the risk of electric shock during an arc flash incident. They help to prevent electric current from passing through the helmet to the user’s head.

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

uring risk assessment: If a risk assessment of the workD place identifies areas or tasks with a high risk of arc flash exposure, arc flash helmets should be used as part of the safety measures.

YELLOW HI-VIS COLLECTION

ROUTINE TESTING AND MAINTENANCE OF ARC FLASH HELMETS

Avoid placing heavy objects on top of the helmet to prevent deformation or damage.

Proper maintenance of arc flash helmets is crucial to ensure that they remain in optimal condition and can provide the necessary protection. Here are some general guidelines for maintaining arc flash helmets:

Updates and Approvals: Stay updated with the manufacturer’s recommendations and any changes in standards or regulations regarding arc flash helmets. Regularly check if the helmet still meets the current safety standards and approvals.

Regular Inspection: Conduct a visual inspection of the helmet before each use. Check for visible damage such as cracks, dents, or wear and tear. If the helmet is damaged, it should be repaired or replaced before being used again.

Training and Awareness: Ensure that the users of arc flash helmets are properly trained in the use, maintenance, and inspection of the helmets. Encourage the reporting of any issues or concerns regarding the condition of the helmet.

Cleaning: Clean the helmet with mild soap and water solutions suitable for the purpose. Avoid using harsh chemicals or solvents, as they can damage the helmet’s materials. Dry the helmet thoroughly after cleaning.

IMPORTANT!

Replacement of Protective Visor: If the helmet is equipped with a protective visor, it should be regularly inspected for scratches, cracks, or other defects. Replace the visor if it is damaged or becomes blurred, as this can affect visibility and protection.

Arc flash helmets have a limited lifespan and should be discarded before the expiration date is exceeded. Information about the helmet’s durability can be found inside the helmet.

Storage: Store the helmet in a dry and protected place away from direct sunlight, extreme temperatures, and chemicals.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

ARC HELMETS RG0004 FLAME RETARDANT GLOVES ARC 16 Glove with high Electric Arc protection. (13-4HFR-AF) EN 407

Optimised for high Electric Arc risks. Perfect in tough working conditions with high heat, flame and Electric Arc risks. High performance in cut resistance. PPE Level 2 on glove, PPE 3 protection on the most exposed areas.

41324X EN 388 3X43E

RG0004 FLAME RETARDANT 7406996 FR CLASSIC HOOD GLOVES ARC 16 Colour: 00 multi-colour

ANSI CUT A5

Size: BILDUNGS 7/XS-12/XXL Glove with high Electric Arc protection. (13-4HFR-AF) BSD

ASTM ASTM F2178 EN 407F2675 2 Back of ATPV Palm cal/cm² ATPV: 47.030 CAL/CM 41324X

Sizeflame 7/XS-12/XXL Optimised for highhood Electric Arc risks. Perfect in in tough workingofconditions The retardant permits the user to work the vicinity live parts

with high heat, flame Electric risks. performance cut have / Quality: 76% Aramid /and 10% fibreglass /arc 8%High modacrylic / 4% elastane at live parts. With this hood you getArc high flash protection. Theinhood hand 16 cal/cm² Print 40 cal/cm² or EN 388 resistance. PPEintegrated Level 2 on glove, PPEbracket. 3 protection on the most exposedto true color visor, hard hat and Arc flash tested according 2% anti-static IEC 61482-1-2 3X43E F1506 ASTM areas. (Gloves) CL.2 ASTM F2178, ATPV: 47.0 cal/cm². Arc flash tested according to DGUV GS-

Coating: Flame Retardant neoprene based composite

Colour: 00 multi-colour ET-29, APC 2 (class 2).FR Additional a higher test level W(LBP)=/ 1% 630 Lining: 79% viscosetested / 10%with Aramid / 10% polyamide Size: 7/XS-12/XXL kJ. Also anti-static certificated according to ASTM F1506, CSA Z462, OSHA 1910.269 ASTM F2675 Size 7/XS-12/XXL Colour: Navy ATPV Palm 30 cal/cm² Back of Quality: 76% hand 16 cal/cm² Print 40 cal/cm² Size: One size Aramid / 10% fibreglass / 8% modacrylic / 4% elastane / ANSI CUT A5

IEC 61482-1-2

2% anti-static

(Gloves) CL.2

Coating: Flame Retardant neoprene based composite Lining: 79% FR viscose / 10% Aramid / 10% polyamide / 1%

RX0001 RX0001 SAFETY SAFETYHELMET HELMETBOX BOXCL.1 CL.1 anti-static

Helmet Helmetwith withintegrated integratedface faceshield shieldand andprotection protectionagainst againstElectric ElectricArc. Arc. GS-ET-29 GS-ET-29 APC APC11

Reflective Reflectivefor forimproved improvedvisibility. visibility.The Thehelmet helmetisisdesigned designedtotoprotect protectthe thehead head against againstmechanical mechanicalshock shockand andthe thehead headand andeyes eyesagainst againstelectrical electricalhazards hazards that thatoccur occurduring duringlive liveworking workingand andwork workatatheight. height.The Theface faceshield shieldprotects protects against againsthazards hazardswhich whichmay mayoccur occurduring duringlive liveworking workingand andcan canfully fullyretract retract into intothe thehelmet helmetwhen whennot notininuse. use.The Theface faceshield shieldisisalso alsoresistant resistanttotoimpact impact ofofparticles particlesofofmedium mediumenergy energyand andhas hasan aninternal internalcoating coatingfor forprotection protection against againstfogging, fogging,an anouter outerscratch-resistant scratch-resistantcoating coatingand andisisresistant resistanttotodamage damage by byfine fineparticles. particles.The Thevisor visorhas hasaalight lighttransmission transmissionfactor factorofofVLT> VLT>75% 75% Combined set with Electric Arc hood 9179, integrated lift-front visor RX0018 (class (class0) 0)in inaccordance accordanceset with withwith European European standards. standards. The helmet helmet meets meets the the Combined Electric ArcThe hood 9179, integrated lift-front viso and helmet with chin strap. requirements requirementsofofEN EN397:2012+A1:2012 397:2012+A1:2012(-40°C (-40°C--+50°C), +50°C),EN EN50365:2002 50365:2002 RX0018 and helmet with chin strap. 917995 Electric Arc hood in softshell fabric with high arc protection. Helmet Class Class00and andEN EN166:2001. 166:2001.Lifetime Lifetimeofofthe thehelmet helmetisis60 60months monthsfrom fromthe the Robust with durable shell construction strap. Cooling vents for high arc protecti date dateofofhelmet manufacture. manufacture. 917995 - Electric Arc hoodandinchin softshell fabric with

SA0001SA0001 ELECTRIC ELECTRIC ARC HOOD + VISOR + HELMET ARC HOOD + VISOR + HELMET

ASTM F2178 ATPV 40 cal/cm²

improved circulation and comfort. RX0018 - Highly transparent 3Phase® Arc Colour: Colour:04 04air white white Helmet - Robust helmet with durable shell construction and chin str Flash protection Size: Size:One One size size lift-front visor.

Cooling vents for improved air circulation and comfort. RX0018 - Hi

Colour: 03size Navy Size Size One One size 3Phase® Arc Flash protection lift-front visor. Size: One transparent size Quality: Quality: Helmet: Helmet:ABS, ABS,Face Faceshield: shield:Polycarbonate Polycarbonate

Colour: 03 navy Size: One size Size One size Quality:

RX0021 RX0021SAFETY SAFETYHELMET HELMETARC ARC36 36 Helmet Helmetwith withintegrated integratedface faceshield shieldand andprotection protectionagainst againstElectric ElectricArc. Arc. GS-ET-29 GS-ET-29 APC APC22 ASTM ASTMF2178 F2178 ATPV ATPV3636cal/cm² cal/cm²

Reflective Reflectivefor forimproved improvedvisibility. visibility.Adjustable Adjustableininsize size53-63cm. 53-63cm.The Thehelmet helmetisis designed designedtotoprotect protectthe thehead headagainst againstmechanical mechanicalshock shockand andelectric electricshock. shock. The Theface faceshield shieldprotects protectsagainst againsthazards hazardswhich whichmay mayoccur occurduring duringlive liveworking working and andcan canfully fullyretract retractinto intothe thehelmet helmetwhen whennot notininuse. use.4-point 4-pointchin chinstrap strapwith with Quick Quickclasp. clasp.The Thehelmet helmetmeets meetsthe therequirements requirementsofofANSI ANSIZ89.1 Z89.1Class ClassEE (20kV (20kVAC), AC),EN EN397 397and andEN EN50365 50365Class Class00(1000 (1000VVAC/1500 AC/1500VVDC). DC).The The face faceshield shieldmeets meetsthe therequirements requirementsofofEN EN166, 166,EN EN170, 170,ASTM-F2178 ASTM-F2178and and GS-ET-29. GS-ET-29. Colour: Colour:04 04white white Size: Size:One Onesize size Size Size One Onesize size Quality: Quality:Helmet: Helmet:ABS, ABS,Face Faceshield: shield:Polycarbonate Polycarbonate

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

907900 FLAME RETARDANT WOOL TERRY ARCSOCK FLASH HELMETS Heavyweight Inherent Flame Retardant sock in wool terry. PFAS-free.

592092 FLAME RETARDANT SHORT ZIP TURTLENECK

EN ISO 14116

Colour: 07 black Non-Metal Inherent Flame Retardant turtleneck underwear in a soft Size: 37-39;and 40-42; 43-45; 46-48 tricot with 20% recycled cotton. PFAS-free. Size 37-39; 40-42; 43-45; 46-48 Heavyweight Inherent Flame Concealed in collar. LongRetardant sleeves. sock in wool terry. PFAS-free. Quality: 45%zipwool / 35% FR viscose / 15% polyamide / 3% antistatic / 03 black navy Colour: 07

index 3

907900 FLAME RETARDANT WOOL TERRY SOCK

EN ISO 11612 EN 1149-5 A1 B1 C1 F1 IECISO 61482-2 EN 14116 CL.1 3 index

2% elastane

ARC_RATING: 7,0 cal/cm² EN 1149-5 EN 1149-5

XS-3XL 40-42; 43-45; 46-48 Size: 37-39; XS-3XL 40-42; 43-45; 46-48 Size 37-39;

920: wool Cantex JX, 235 g/m², LOI: 30,1% Quality: 45% / 35% FR viscose / 15% polyamide / 3% antistatic / 2% elastane

TRANEMO SKINSAFE

RX0001 RX0001 SAFETY SAFETY HELMET HELMET BOX BOX CL.1 CL.1 Helmet Helmet with with integrated integrated face face shield shield and and protection protection against against Electric Electric Arc. Arc. GS-ET-29 GS-ET-29

Reflective Reflective for for improved improved visibility. visibility. The The helmet helmet is is designed designed to to protect protect the the head head against against mechanical mechanical shock shock and and the the head head and and eyes eyes against against electrical electrical hazards hazards that that occur occur during during live live working working and and work work at at height. height. The The face face shield shield protects protects against against hazards hazards which which may may occur occur during during live live working working and and can can fully fully retract retract into into the the helmet helmet when when not not in in use. use. The The face face shield shield is is also also resistant resistant to to impact impact of of particles particles of of medium medium energy energy and and has has an an internal internal coating coating for for protection protection against against fogging, fogging, an an outer outer scratch-resistant scratch-resistant coating coating and and is is resistant resistant to to damage damage Heavyweight Inherent Flame Retardant sock in woolfactor terry.of PFAS-free. by The has aa light VLT> by fine fine particles. particles. The visor visor has light transmission transmission factor of VLT> 75% 75% (class accordance (class 0) 0) inblack accordance with with European European standards. standards. The The helmet helmet meets meets the the Colour: 07in requirements of (-40°C requirements of EN EN 397:2012+A1:2012 397:2012+A1:2012 (-40°C -- +50°C), +50°C), EN EN 50365:2002 50365:2002 Size: 37-39; 40-42; 43-45; 46-48 Class 00 and 166:2001. Class37-39; and EN EN 166:2001. Lifetime of of the the helmet helmet is is 60 60 months months from from the the Size 40-42; 43-45; Lifetime 46-48 date date of of manufacture. manufacture. Quality: 45% wool / 35% FR viscose / 15% polyamide / 3% antistatic / Colour: Colour: 04 04 white white

APC APC11

907900 FLAME RETARDANT WOOL TERRY SOCK

EN ISO 14116 index 3 EN 1149-5

907900 FLAME RETARDANT WOOL TERRY SOCK 2% elastane

Size: Size: One One size sizeInherent Flame Retardant sock in wool terry. PFAS-free. Heavyweight Size Size One One size Colour: 07size black Quality: Quality: Helmet: Helmet: ABS, ABS, Face Face 46-48 shield: shield: Polycarbonate Polycarbonate Size: 37-39; 40-42; 43-45; Non-Metal and Inherent Flame Retardant turtleneck underwear in a soft Size 37-39; 40-42; 43-45; 46-48 tricot with 20% recycled cotton. PFAS-free. Glove Electric Arc Quality:with 45%high / 35%Long FRprotection. viscose / (13-4HFR-AF) 15% polyamide / 3% antistatic / Concealed zipwool in collar. sleeves. Optimised for high Electric Arc risks. Perfect in tough working conditions 2%navy elastane Colour: 03 Non-Metal and flame Inherent Retardant long Johns in a soft tricot with high heat, andFlame Electric Arc risks. High performance in cutwith Size: XS-3XL 20% recycled PFAS-free. resistance. PPEcotton. Level 2 on glove, PPE 3 protection on the most exposed Size XS-3XL areas. Glove with high Electric Arc protection. (13-4HFR-AF) KASK SAFETY Elasticated waist. Quality: 920: Cantex JX, 235 g/m², LOI: 30,1% Colour:X00 multi-colour 03 navy Optimised forVis high Electric Perfect in tough working conditions Zenith High helmet have Arc Highrisks. visibility fluorescent color shell and adhesive

592092 FLAME RETARDANT SHORT ZIP TURTLENECK

EN ISO 14116 index 3

RG0004 FLAME RETARDANT GLOVES ARC 16

EN 1149-5 EN ISO 11612 A1 B1 C1 F1

593092 FLAME RETARDANT LONG JOHNS

EN IEC407 61482-2 41324X CL.1 ARC_RATING: 7,0 cal/cm² ISO 11612 EN 388 A1 B1 C1 F1 3X43E EN 1149-5 IEC407 61482-2 EN ANSI CUT EN 50365 CL.1 41324X A5 TRANEMO SKINSAFE ARC_RATING: 7,0 cal/cm² ASTM EN 388F2675 ASTM F2178 2 Back of ATPV Palm cal/cm² 3X43E ATPV: 12.030 CAL/CM EN 1149-5

RG0004 FLAME RETARDANT ARC 16 WVI00015 ZENITH X HELMET GLOVES + ARC FLASH VISOR

Size: 7/XS-12/XXL with highstickers. heat, flame and Electric risks. High performance cut XS-3XL; 5XL; reflecting It 7XL is designed with Arc an integrated slots that enablein visor resistance. PPE Level on glove, protection the most Size 7/XS-12/XXL XS-3XL; 5XL; 7XL2 and adapters to eye protection mountPPE face 3protection to on helmet. It hasexposed a strong areas.

Quality: 76% Aramid / 10% / clip, 8% modacrylic / 4% elastane external lamp attachment that are compatible with all / 920: luminescent Cantex JX, 235fibreglass g/m², LOI: 30,1% hand 16 cal/cm² Print 40 cal/cm² nylon ANSI CUT Colour: 00 multi-colour headlamps elastic bands. The chinstrap has a loop for clipping the helmet to 2%with anti-static IEC 61482-1-2 A5 TRANEMO SKINSAFE Size: 7/XS-12/XXL (Gloves) CL.2 a harness. In the back is a Retardant high visibility nameplate. EN 397, EN 50365 (Class Coating: Flame neoprene based composite ASTM F2675 Size 7/XS-12/XXL

RX0021 RX0021 SAFETY SAFETY HELMET HELMET ARC ARC 36 36

0), Protection against rear /and sideAramid impacts/ in conformity with EN Lining: 79%top, FRfront, viscose 10% 10% polyamide / 1% Quality: 76% Aramid / 10% fibreglass / 8% modacrylic / 4% penetration. elastane / Helmet Helmet with with integrated integrated face face shield shield and and protection protection against against Electric Arc. Arc. hand 16 cal/cm² Print 40 cal/cm² 12492, Clause 4.2.1 shock energy absorption capacity, ClauseElectric 4.2.2 ATPV Palm 30 cal/cm² Back of

anti-static

2%Class anti-static Reflective Reflective for for improved improved visibility. Adjustable in in size size 53-63cm. 53-63cm. The The helmet helmet is is GS-ET-29: 2. NFPA visibility. 70E: ARC Adjustable 2 designed designed to to protect protect the the head head against againstneoprene mechanical mechanical shock shock and and electric electric shock. shock. Coating: Flame Retardant based composite Colour: White

GS-ET-29 GS-ET-29 IEC 61482-1-2 APC APC22 (Gloves) CL.2 ASTM ASTMF2178 F2178 ATPV ATPV36 36cal/cm² cal/cm²

The The face face shield shield protects protects against hazards which may may occur occur during during live live working Size: One size Lining: 79% FR against viscosehazards / 10% which Aramid / 10% polyamide /working 1% and and can can fully fully retract retract into into the the helmet helmet when when not not in in use. use. 4-point 4-point chin chin strap strap with with Quality: anti-static Outer material: HD Polypropylene. Inner Material: HD Expanded PolyQuick Quick clasp. clasp. The The helmet helmet meets meets the the requirements requirements of of ANSI ANSI Z89.1 Z89.1 Class Class EE styrene. Palm material: Soft PA Nylon. (20kV (20kV AC), AC), EN EN 397 397 and and EN EN 50365 50365 Class Class 00 (1000 (1000 VV AC/1500 AC/1500 VV DC). DC). The The

RG0004 FLAME RETARDANT GLOVES ARC 16

face face shield shield meets meets the the requirements requirements of of EN EN 166, 166, EN EN 170, 170, ASTM-F2178 ASTM-F2178 and and Glove with high Electric Arc protection. (13-4HFR-AF) GS-ET-29. GS-ET-29. EN 407

Optimised for high Electric Arc risks. Perfect in tough working conditions Colour: Colour: 04 04 white white withOne highsize heat, flame and Electric Arc risks. High performance in cut Size: Size: One size resistance. PPE Level 2 on glove, PPE 3 protection on the most exposed Size Size One One size size areas. Quality: Quality:Helmet: Helmet: ABS, ABS, Face Face shield: shield: Polycarbonate Polycarbonate Colour: 00 multi-colour

41324X EN 388 3X43E

7406501 HELMETRETARDANT W. ELECTRICIAN FACE RG0004 FLAME GLOVES ARCSHIELD 16

ANSI CUT A5

BSD Size: BILDUNGS 7/XS-12/XXL Glove with high Electric Arc protection. (13-4HFR-AF)

ASTM ASTM F2178 EN 407F2675 2 Back of ATPV Palm cal/cm² ATPV: 28.030 CAL/CM 41324X

Size 7/XS-12/XXL Optimised high Electric Arc risks. Perfect in tough ErgoS Intec for Power ARC3 has integrated visor. Then you doworking not useconditions the visor,

593092 FLAME RETARDANT LONG JOHNS

heat, flame Electric Arc risks. High performance cut Quality: Aramid /and 10% fibreglass / 8% modacrylic 4%in elastane / can high be76% pushed into the helmet. This helmet with face shield /has the Real hand 16 cal/cm² Print 40 cal/cm² itwith Non-Metal and Inherent Flame Retardant long Johns in a soft tricot with EN 388 resistance. PPEby Level glove, PPE 3 protection on will the make most itexposed View Technology BSD.2 Itonhas an ergonomically design, comfort 2% anti-static IEC 61482-1-2 EN ISOF1506 11612 20% recycled cotton. PFAS-free. 3X43E ASTM (Gloves) toareas. wear all day. The visor has permanent anti-fog coating. It is possible to wear A1 B1 C1CL.2 F1

Coating: Flame Retardant neoprene based composite

Elasticated waist. Colour: 00 multi-colour ear-defender and lamp together with the helmet. Visor: EN 166:2001/DIN, Lining: Colour: 03 navy 79% FR viscose / 10% Aramid / 10% polyamide / 1% Size: 7/XS-12/XXL CL.1 EN 170:2002 and ANSI/ISEA Z87.1. Helmet: EN 397: 2012+A1: 2012, EN anti-static Size: 7/XS-12/XXL XS-3XL; 5XL; 7XL ASTM F2675 7,0 cal/cm² ARC_RATING: Size 50365:2002 (Class 0), ANSI/ISEA Z89.1. ATPV Palm 30 cal/cm² Back of Size XS-3XL; 5XL; 7XL Quality: 76% Aramid / 10% fibreglass / 8% modacrylic / 4% elastane / hand 16 cal/cm² Print 40 cal/cm² Colour: White EN 1149-5 Quality: 920: Cantex JX, 235 g/m², LOI: 30,1% 2% anti-static Size: One size IEC 61482-1-2 ANSI CUT IEC 61482-2

A5 50365 EN

(Gloves) CL.2 TRANEMO SKINSAFE

Quality: Coating: Fabric double layer, (10 oz.yd2) per layer:based cotton,composite antistatic Flame Retardant neoprene

Lining: 79% FR viscose / 10% Aramid / 10% polyamide / 1% anti-static

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

SCUFF CAPS ORIGINAL SAFETY

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

DURABLE CORDURA TEXTILE The models are reinforced with high-performance, super durable

METAL-FREE

Cordura textile, known for its

The shoes do not contain metal

extreme abrasion resistance

parts. This provides lower weight and better balance. Ideal for, for example, airports and metal-free zones

FIBERGLASS TOE CAP Fiberglass toe cap that prevents injuries from falling objects

FAP® NAIL GUARD The nail guard is made of ceramic-coated fibers that provide high protection against sharp objects

EVERCUSHION® CUSTOM FIT MID INSOLE In all Scuff Caps models, you will find the Evercushion CUSTOM FIT MID insole which consists of polyurethane foam cells that transport moisture away from the foot, and in combination with moisture-absorbing and antibacterial treated fabric, ensures a comfortable climate for the foot. The sole provides permanent cushioning, without losing elasticity, and at the same time pro-

CUSTOM FIT MID

longs the life of the shoe.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

Scuff Caps are specially developed for heavy industries and risk environments with high safety requirements. The new innovative sole combination is based on knowledge from the energy, offshore, and construction sectors, and is one of PUMA SAFETY’s safest and most comfortable combinations.

PUMA DISC

The traditional shoelaces are replaced with stainless steel wires, which are connected to a rotating disc located on the tongue of the safety shoe. The clever thing about the Disc lacing system is that it repels sand, oil, and mud.

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

SELF-CLEANING RUBBER OUTSOLE

The nitrile outsole is exceptionally robust: it is briefly heat resistant up to 300°C and is resistant to fuel, oil, and most chemicals. The tread design makes it easy to loosen or knock dirt free from the safety shoe, thereby avoiding accidents caused by dirt.

SCUFF CAP

The robust ProNose protects the leather on the nose of the shoe from wear - thereby ensuring a longer lifespan for the shoes, especially during kneeling work.

YELLOW HI-VIS COLLECTION

SAFETY SHOES

6-63021 CASCADES MID, DISC

SRC

Puma Safety Cascades Mid Disc, S3, HRO FIBERGLASS TOE CAP

Protection: Fiberglass toe cap and flexible FAP® nail guard Plus: Metal-free, CORDURA® reinforced, Pronose, PUMA DISC lacing system

METAL FREE

Upper: Oiled full-grain leather Lining: BreathActive® functional lining

HRO

Insole: Evercushion® CUSTOM FIT MID

HEAT ISOLATION

FIBER NAIL GUARD

Outsole: Nitrile outsole heat resistant up to 300°C, slip-resistant Size: 39-48

BIG SIZES

PUMA DISC

COLD ISOLATION

5-63274 IRON HD BLACK MID

Puma Safety Iron HD Black Mid, S3S, FO, LG, SR FIBERGLASS TOE CAP

Protection: Fiberglass toe cap and flexible FAP® nail guard Plus: Soft padding, closed tongue, heel cap for extra stability and protection,

METAL FREE

ladder grip

FIBER NAIL GUARD

Upper: Oiled full-grain leather Lining: BreathActive functional lining Insole: Evercushion® MAX

BIG SIZES

Outsole: HEAVY DUTY - oil-resistant TPU outsole with slip-resistant octopus pattern for improved grip (self-cleaning), shock-absorbing PU midsole, and abrasion-resistant scuff cap Size: 39-48

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

SAFETY SHOES

5-63073 CONQUEST BLACK CTX HIGH

SRC

Puma Safety Conquest Black CTX High, S3, HRO FIBERGLASS TOCAP

Protection: Fiberglass toe cap and flexible FAP® nail guard Plus: High shaft, YKK zipper, extra heel support and KICK OFF reinforcement in

HRO

the heel, closed tongue, Pronose

HEAT ISOLATION

FIBER NAIL GUARD

BIG SIZES

Lining: Breathable textile and COA.TEX® membrane Insole: Evercushion® CUSTOM FIT MID Outsole: Nitrile outsole heat resistant up to 300°C, slip-resistant Size: 40-48

COLD ISOLATION

WATER PROOF

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

Upper: Oiled full-grain leather

YELLOW HI-VIS COLLECTION

SAFETY SHOES

VIND- OG VANDTÆT COA.TEX MEMBRAN

LET PÅ OG AFTAGNING MED YKK LYNLÅS

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

TRANEMO SKINSAFE PROTECTION FROM THE INSIDE OUT

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

Starting at the skin level, we have taken a user-centered approach to design, placing the individual at the center of protection. As one of the leading suppliers of inherent flame retardant workwear, we understand that every garment we develop must be of the highest quality. Achieving our goal of zero serious flame- and heat-related workplace accidents requires a more holistic approach. Our solution is to put you and how we best protect your skin at the center.

INSULATION SKIN PROTECTION

SHIELD

MERINO RX 4.6 CAL/CM2

CANTEX TERRY 8.6 CAL/CM2

TERA TX 8.1 CAL/CM2

ELIM = 35.0 CAL/CM2 21.3 CAL/CM2

1+1=3 The protection is greater than the sum of its individual layers.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

ENHANCES PROTECTION AGAINST ELECTRIC ARCS AND RADIANT HEAT Tranemo Skinsafe™ is a certified multi-layer protection system designed to protect the user’s skin from flames, heat, and arc flash incidents. By wearing multiple layers of arc protective clothing, protection is significantly increased due to the formation of air gaps between the layers, and air is a poor conductor of electricity. It is important to emphasize that the total protection value of a layer-on-layer system cannot be calculated simply by summing the energy values from individual pieces of clothing. To determine the energy value of a layer-on-layer system, an arc flash test of multiple layers on a mannequin is required, simulating how the clothing would be worn in real-life situations.

We refer to our tested layer-on-layer system as Tranemo Skinsafe™, which provides a greater opportunity to select the right protective clothing based on risk assessment. As mentioned in NFPA 70E, the American counterpart to the European ARC standard, and from Tranemo Skinsafe™ testing experience, using multiple layers of arc-protective clothing is an effective way to achieve the required arc flash protection at the lowest overall weight of a layer-on-layer system. The use of a layer-on-layer system, therefore, offers higher user comfort and an increased likelihood that the arc-protective clothing is always worn.

LAYER 1 – SKIN PROTECTION In the event of an accident, wearing the wrong underwear can lead to the fabric burning and melting onto your skin. To protect against this, our Flame-Retardant underwear offer the following benefits: Inherent Flame Retardant safety, soft and comfortable. Anti-Static and does not give a bad odour.

LAYER 2 – INSULATION

An insulating mid-layer should be worn to increase comfort during the colder months of the year. This layer creates a distance between layer 1 and 3 which insulates against electricity and heat as well as low temperatures.

LAYER 3 – SHIELD The primary function of any outer layer must be protection – however, to be worn every day, these garments should also fit the body snugly and offer comfort, freedom of movement and meet practical needs such as storage.

AIR GAP The air gaps between the layers of the Tranemo Skinsafe™ system have a low conductivity of electricity and heat. As well as insulating against cold in the winter they provide extra safety in any number of demanding work situations.

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

The use of multiple thinner layers instead of one thick layer provides the wearer with the following additional benefits: LIGHTWEIGHT The layers of air in the Tranemo Skinsafe™ system increase protection against heat, electricity and cold. They also contribute to a system that has a combined weight that is much less than a single garment with the same protection. This weight reduction allows the wearer to work more effectively and for longer periods.

FREEDOM OF MOVEMENT Soft, thin garments with ergonomic design offer much better freedom of movement than thick garments. Thanks to this, the difference the wearer feels at the end of the working day is significant.

THE RIGHT FIT The multi-layer system gives the wearer the opportunity to easily ‘fine-tune’ their clothing. Put on more when the weather demands this or go down to a comfortable base protective level when the risk is lower and the temperature is higher.

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

SKINSAFE™ TWO- & THREE LAYER SYSTEMS TOTAL PROTECTION

SKIN PROTECTION

SHIELD 503089 94

637289 94

ELIM: 22,0 cal/cm2 ATPV: 27,0 cal/cm2 PPE CAT: 2

895 CANTEX JERSEY AT

899 CANTEX TERRY

ELIM: 3,9 cal/cm2

ELIM: 8,6 cal/cm2

EBT: 4,6 cal/cm2

ATPV: 11,0 cal/cm2

PPE 1

PPE 2

5834 81 94

5940 92 03

ELIM: 17,0 cal/cm2 ATPV: 19,0 cal/cm2 PPE CAT: 2

920 CANTEX JX

811 TERA TX

ELIM: - cal/cm2

ELIM: 8,1 cal/cm2

EBT: 7,0 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

632281 94

5930 92 03

ELIM: 17,0 cal/cm2 ATPV: 19,0 cal/cm2 PPE CAT: 2

920 CANTEX JX

811 TERA TX

ELIM: - cal/cm2

ELIM: 8,1 cal/cm2

EBT: 7,0 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

5834 81 94

6315 90 07

ELIM: 14,0 cal/cm2 ATPV: 22,0 cal/cm2 PPE CAT: 3

901 MERINO RX

811 TERA TX

ELIM: 4,6 cal/cm2

ELIM: 8,1 cal/cm2

ATPV: 5,3 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

632281 94

6312 90 07

ELIM: 14,0 cal/cm2 ATPV: 22,0 cal/cm2 PPE CAT: 2

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

901 MERINO RX

811 TERA TX

ELIM: 4,6 cal/cm2

ELIM: 8,1 cal/cm2

ATPV: 5,3 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

Tera TX is our ’best-selling series’ of flame retardant workwear for the electrical and energy sector and other demanding outdoor work. When Tera TX is combined with one or more layers of other flame retardant garments, the user gets a system that achieves higher protection and a combination that suits work of varying intensity and temperature.

YELLOW HI-VIS COLLECTION

You can learn more about the various SKINSAFE™ systems at the following link: tranemoworkwear.dk/tranemo-skinsafe

TOTAL PROTECTION

SKIN PROTECTION

INSULATION

SHIELD 5834 81 94

637589 94

637289 94

ELIM: 37,0 cal/cm2 ATPV: 44,0 cal/cm2 PPE CAT: 4

895 CANTEX JERSEY AT

899 CANTEX TERRY

811 TERA TX

ELIM: 3,9 cal/cm2

ELIM: 8,6 cal/cm2

ELIM: 8,1 cal/cm2

EBT: 4,6 cal/cm2

EBT: 11,0 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

5834 81 94

637589 94

6315 90 07

ELIM: 35,0 cal/cm2 ATPV: 40,0 cal/cm2 PPE CAT: 4

901 MERINO RX

899 CANTEX TERRY

811 TERA TX

ELIM: 4,6 cal/cm2

ELIM: 8,6 cal/cm2

ELIM: 8,1 cal/cm2

ATPV: 5,3 cal/cm2

EBT: 11,0 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

514595 94

503089 94

637289 94

ELIM: 63,0 cal/cm2 ATPV: 68,0 cal/cm2 PPE CAT: 4

895 CANTEX JERSEY AT

899 CANTEX TERRY

950 WINDTECH FR 340

ELIM: 3,9 cal/cm2

ELIM: 8,6 cal/cm2

ELIM: 23,0 cal/cm2

EBT: 4,6 cal/cm2

ATPV: 11,0 cal/cm2

ATPV: 28,0 cal/cm2

PPE 1

PPE 2

PPE 3

5834 81 94

6330 90 07

6312 90 07

ELIM: 37,0 cal/cm2 ATPV: 42,0 cal/cm2 PPE CAT: 4

901 MERINO RX

903 MERINO TX

811 TERA TX

ELIM: 4,6 cal/cm2

ELIM: 9,6 cal/cm2

ELIM: 8,1 cal/cm2

ATPV: 5,3 cal/cm2

EBT: 10,0 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

632281 94

6302 90 82

6312 90 07

ELIM: 32,0 cal/cm2 ATPV: 40,0 cal/cm2 PPE CAT: 4

901 MERINO RX

902 MERINO BX

811 TERA TX

ELIM: 4,6 cal/cm2

ELIM: 6,3 cal/cm2

ELIM: 8,1 cal/cm2

ATPV: 5,3 cal/cm2

EBT: 7,6 cal/cm2

ATPV: 8,7 cal/cm2

PPE 1

PPE 2

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

EXAMPEL OF:

ARC FLASH SYSTEM The products and the amount of protection you should wear depend on the designated PPE category. There are 4 PPE categories, as shown in the table below.

RG0006

RX0001

632281

637289

CAT 1 / PPE 1 MIN. 4 CAL/CM2 ATPV / EBT

LONG SLEEVES T-SHIRT

TROUSERS

ARC FLASH HELMET

ARC FLASH GLOVES

EBT: 4,6 cal/cm2

EBT: 8,7 cal/cm2

APC 1

ATPV: 5,9 cal/cm2

599900

632281

637589

637289

CAT 2 / PPE 2 MIN. 8 CAL / CM2 ATPV / EBT

LONG SLEEVES T-SHIRT

SWEATSHIRT

TROUSERS

NECK PROTECTION

EBT: 4,6 cal/cm2

EBT: 11,0 cal/cm2

EBT: 8,7 cal/cm2

EBT: 6,3 cal/cm2

Combination: EBT 27 cal/cm2

631290

632281

637589

637289

CAT 3 / PPE 3 MIN. 25 CAL / CM2 ATPV / EBT

LONG SLEEVES T-SHIRT

SWEATSHIRT

TROUSERS

LONG JOHNS

EBT: 4,6 cal/cm2

EBT: 11,0 cal/cm2

EBT: 8,7 cal/cm2

ATPV: 5,3 cal/cm2

Combination: EBT 27 cal/cm2

Combination: ATPV 22,0 cal/cm2

519495

514595

637589

637289

CAT 4 / PPE 4 MIN. 40 CAL / CM2 ATPV / EBT

LONG SLEEVES T-SHIRT

SWEATSHIRT

SOFTSHELL JACKET

SOFTSHELL TROUSERS

EBT: 4,6 cal/cm2

EBT: 11,0 cal/cm2

EBT: 28,0 cal/cm2

EBT: 44,0 cal/cm2

Combination: ATPV 68 cal/cm2

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

IMPORTANT!

All values are provided in ATPV/EBT as they relate to the NFPA 70E category classifications. The European value ELIM does not correspond to NFPA 70E.

5-63073 LEATHER SAFETY BOOTS

5-63073

RG0009

RX0001 ARC FLASH HELMET

ARC FLASH GLOVES

APC 1

ATPV: 9,7 cal/cm2

LEATHER SAFETY BOOTS

5-63073

RG0005

RX0021

630890 BALACLAVA

ARC FLASH HELMET 36

ARC FLASH GLOVES

ATPV: 7,6 cal/cm2

ATPV: 36,0 cal/cm2

ATPV: 42,0 cal/cm2

LEATHER SAFETY BOOTS

APC 2

5-63073

RG0005

SA0001 ARC FLASH HOOD + HELMET+ VISOR

ARC FLASH GLOVES

ATPV: 40,0 cal/cm2

ATPV: 42,0 cal/cm2

LEATHER SAFETY BOOTS

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

TRANEMO ADVANCED WORKWEAR

SIZE TABLE The size guide will help you find the right size of your Tranemo garment. Men and women have different body types and should therefore use different body measurements when choosing size. Take the measurements directly on your underwear, room for movement is calculated into the garment.

GENTS Primarily use waist and inside leg measurements to choose the right size of trousers.

C-size (Regular waist and regular leg length) Size

Waist inches

30”R

32”R

33”R

34”R

36”R

38”R

40”R

42”R

45”R

48”R

50”R

Body length

170-178

176-184

182-190

Chest

86-90

90-94

94-98

98-102

102-106

106-110

110-114

114-118

118-122

122-126

126-130

Waist

74-78

78-82

82-86

86-90

90-94

94-99

99-104

104-110

110-116

116-122

122-128

Inside leg

C-size (Regular waist and longer leg length) Size

146

148

150

152

154

156

Waist inches

32”T

33”T

34”T

36”T

38”T

40”R

Body length

184-192

190-198

Chest

90-94

94-98

98-102

102-106

106-110

110-114

Waist

78-82

82-86

86-90

90-94

94-99

99-104

Inside leg

D-size (Larger waist and shorter leg length) Size

100

104

108

112

116

120

Waist inches

30”S

32”S

33”S

34”S

36”S

38”S

40”S

42”S

45”S

48”S

Body length

168-176

174-182

Chest

82-86

86-90

90-94

94-98

98-102

102-106

106-110

110-114

114-118

118-122

Waist

76-80

80-84

84-88

88-92

92-96

96-100

100-105

105-110

110-116

116-122

Inside leg

Primarily use chest measurements to choose the right size. Size

100

104

108

112

116

120

Chest

30”S

32”S

33”S

34”S

36”S

38”S

40”S

42”S

45”S

48”S

Hip

168-176

174-182

Shoulder+Sleeve

82-86

86-90

90-94

94-98

98-102

102-106

106-110

110-114

114-118

118-122

Shirt size

76-80

80-84

84-88

88-92

92-96

96-100

100-105

105-110

110-116

116-122

CCBSAFETY – WORKWEAR & SAFETY EQUIPMENT

YELLOW HI-VIS COLLECTION

LADIES Primarily use hip measurements to choose the right size.

C-size (Regular waist and regular leg length) Size

Waist inches

29/31”

30/31”

32/31”

33/31”

34/31”

36/31”

38/31”

40/31”

Body length

164-172

Chest

78-82

82-86

86-90

90-94

94-98

98-102

102-107

107-113

Waist

102

106

110

115

Inside leg

30.7”

Inside leg inches

Primarily use chest measurements to choose right size. Size

XXL

Chest

82-88

88-94

94-100

100-107

107-116

Hip

92-98

96-103

101-108

106-114

112-120

Waist

70-80

74-84

80-90

85-95

92-102

Shoulder+Sleeve

71-73

73-75

74-76

76-78

77-79

Corresp. Gent size

XXS

SIZE CONVERSION GENTS

XXS

XXL

3XL

4XL

Gent size

40-42

46-48

52-54

58-60

64-66

Shirt size

33-34

35-36

37-38

39-40

41-42

43-44

45-46

47-48

49-50

LADIES

XXL

Ladies size

34-36

40-42

46-48

Gent size

XXS

FLAME RETARDANT & ELECTRIC ARC PROTECTIVE WORKWEAR

Der tages forbehold for trykfejl.

WE ARE YOUR ONE-STOP SAFETY SHOP, WHEREVER YOU NEED US CCBSAFETY.COM

CCB Safety Fiskebrogade 19 6700 Esbjerg E-mail: order.dk@ccbsafety.com

CCB Safety 37 Tripps Lane East Providence, RI-02915 E-mail: order.us@ccbsafety.com

CCB Safety B2 Base Business Space Chamberlain Road Hull, HU8 8HL E-mail: order.uk@ccbsafety.com

CCB Safety Rm. 3, 14F., No. 286, Sec. 1, Gaotiezhanqian W. Rd., Zhongli Dist., Taoyuan City 320016 E-mail: order.tw@ccbsafety.com