TradeZone Caliper V194 Oct-Nov 2023

NZ’S INDUSTRIAL SUPPLY SPECIALISTS

TyresealantsdesignedtokeepyouandNewZealandmoving

Grease Cartridge

Mobilgrease CM-P is a NLGI Grade 2 high performance grease designed to operate under extreme-pressure.

•Excellent resistance to water, including spray

•Very good EP and anti-wear protection

•Better stay-put properties at high temperatures

•Resists rust and corrosion

•Good pumpability at low temperatures

$1662+GST

$19.11

Industrial Cleaner and

Multipurpose industrial strength concentrate formula provides a safer alternative to caustic acidic cleaners.

Supreme Cleaner

Removes machining oils and cutting fluids from manufacturing parts and extruded tubing. Formulated for heavy-duty degreasing tasks such as engines, machinery, manufacturing equipment, dip tanks, HVACR coils and cooling towers.

Heavy Duty Hand Cleaner

Solvol for tough dirt and grime is the heavy-duty hand cleaner that’s ideal for cleaning ingrained dirt, grease, oil, paint, ink and solvents. Contains no petroleum solvents

pH controlled

Natural moisturising for the skin

Natural citrus oils and fine granules removes ingrained dirt.

Galmet ColdGal

Galmet ColdGal is a zinc rich, long term protective Cold Galvanizing coating for use on steel, iron and to touch up welds and damaged galvanizing. Long term protection of steel, heat resistance up to 150º C, high purity zinc, tough and flexible. Fast dry, excellent adhesion and easy to apply

Mobil XHP222, 16kg

Mobilgrease XHP™ 220 greases are extended service lithium complex greases intended for a wide variety of applications and severe operating conditions. These greases were designed to outperform conventional products by applying cutting edge, proprietary, lithium complex manufacturing technology.

$36619+GST

$421.12

Absorbs immediately on contact

Strong wicking action

All natural

Suitable to absorb and clean up - oil, petrol and most liquid chemical spills

Coloured T-Shirt Rags

Compressed Lint

Puregiene Paper

Made from virgin paper that is perforrated.

Work Deck

Ideal for around machinery & workbenches

Heavy duty anti-fatigue

Asorbs shock and noise

Holes for drainage in wet areas, all edges bevelled.

$11900+GST

$136.85 GST Incl.

Premium PVC Joining & Sealing Duct Tape

Outside Micrometer

• All Mitutoyo micrometers are made from the highest quality material.

• All micrometers are fitted with either ratchet or friction thimbles for constant force measuring.

• Best possible repeatability is achieved from Mitutoyo Micrometers.

BONUS Mitutoyo Notebook

BONUS Mitutoyo Notebook

Direct to Rust Metal Paint Aerosol 400ml

• Paint directly onto rusty surface without the need for a primer or undercoat.

• Fast dry and recoat times means the job can usually be done in a day.

• 8 Years Protection.

Dial Indicator and Mag Stand Combo

• Series 2 standard type dial indicators are Mitutoyo's most popular and have the widest application.

• Mitutoyo's Magnetic Stands clamp to iron or steel surfaces with a strong magnetic force.

Dial Indicator and Mag Stand Combo

• Designed to probe surfaces that cannot be reached with a normal dial gauge.

• 7011S-10 Magnetic Stand offers fine adjustment.

Fast Curing Epoxy

• Fast curing but allows ample time to apply and position the repair.

• For repairs that must be less visible.

• Strength rivals heavy duty paste epoxies.

Direct to Rust Metal Paint Smooth 2.5litre

• Paint directly onto rusty surface without the need for a primer or undercoat

• Fast dry and recoat times means the job can usually be done in a day

• 8 Years Protection

Super Epoxy

• Unlimited uses in bonding, assembling, filling and sealing most materials and can be applied via a static mix nozzle vertically and overhead.

• Cures quickly at room temperature.

Super Filler

• Ultra tough drillable finish

• Non-shrink and non-sag; first time right application saves time.

• Fills a 5cm deep hole in a single layer and 10cm in multiple layers.

• 5cm fill is ready for painting in 2 hours.

BONUS

Vinyl Fabrics & Plastics Adhesive 30ml

Waterproof

Dries Clear and remains flexible

Interior and Exterior Applications

Liquid adhesive formulated for repairing and mending flexible plastics like vinyl.

Adhesive withstands bending and torsion for long-lasting crafts involving fabric, canvas, rubber, and leather.

$695+GST

$7.99 GST Incl.

Metal/Concrete Epoxy 25ml

1360694

Marine Epoxy 25ml

Permanent epoxy can be applied and cured underwater and ideal for projects requiring high bonding strength on surfaces exposed to water immersion.

Water and solvent resistant Apply and cure underwater 2 hour set time.

$2691+GST

$30.95

All Purpose Repair Putty 56g

Hand-mixable and fast-setting moldable adhesive for small emergency repairs that bonds to damp surfaces and can cure underwater .

Easy to Use - Knead, Apply, Ready Waterproof Potable Water Safe.

$1648+GST

Permanent, high-strength bond works great on railings, awnings, posts, brick, concrete and cinderblock without conducting electricity. Versatile epoxy can be used as an adhesive for a wide range of materials like tile, wood, metal, ceramic, and glass to repair machinery, tools, pipes, and more. 1919325

$18.95 GST Incl.

Plastic Epoxy 25ml

$1213+GST

$13.95

5min Instant Epoxy 14ml

General purpose epoxy

5 Min set time includes convenient mixer nozzle Can be used as an adhesive for a wide range of materials or as a versatile filler for gap bonding, surface repairs and laminating.

$2778+GST

Loctite Epoxy Plastic can be used as an adhesive for a wide range of plastic materials or as a versatile filler for gap filling, surface repairs and laminating. Loctite Epoxy Plastic does not shrink and is resistant to water and most common solvents. It can be tinted with earth pigments, cement, or sand for color matching. It can be sanded and drilled. 1363118

$31.95 GST Incl.

WD-40 214ml Smart Straw

Stops Squeaks

Loosens rusted parts & frees sticky mechanisms

Drives out moisture

Cleans & protects

Includes Smart-Straw for two ways to spray.

GalMax™ Cold & Silver Gal Paints, 400g Aerosol

- Fast drying 3-in-1 zinc-rich touch up set

- Protects in the same manner as hot-dipping

- Exceptional long-term corrosion protection

- Weathers to the same colour as normal galvanising

Zero Spat™ Paintable Dry Anti-Spatter,

300g Aerosol

- Silicone-free & non-oily

- Long-lasting dry white film

- Eliminates the need for solvent cleaning prior to painting

$1290+GST

Aluminium Non Aerosol

Bottle - Refillable

Spray

Refillable Alluminium Sprayer for Heavy Duty / Industrial Solvents. Ideal for Lubricants, rust preventatives and brake cleaning applications. Eco-Friendly, refillable and rechargeable. Eliminates Dangerous or Harmful Propellants.

Zero Spat™ Heavy Duty Anti-Spatter, 500g Aerosol

- Silicone-free wet film

- Solvent-based & fast drying

- Leaves a light surface film

- Protects from rust & corrosion

$14.49

Zero Spat™ Heavy Duty Paintable Anti-Spatter, 20 Litres

- Water-based & solvent-free

- Easy wipe-off milky formula

- Highly heat resistant

- Non-toxic with low odour

- Slow evaporation

PREMIUM PRODUCTS THAT GET THE JOB DONE

Lever Action Grease Gun

600A

• Grease pressures of up to 12,000psi (828bar)

• Delivers up to 1.6g of grease per stroke

• Unique Twin-Lock System seals the piston & eliminates the possibility of dummy lubrication

• Eve r-Flow System enables the gun to be used with thick/tacky greases even on the coldest winter mornings

• Light weight aluminium die cast head assembly

• Manufactured in Germany

Alemlube Quick Release Grease Gun Coupler

A14512

• 1/8" BSP(f) thread

• Maximum working pressure of 10,000psi (690bar)

• Fits all metric & SAE specification grease nipples

• Works with all grease gun types - pneumatic, manual & battery

• 4 hardened spring steel jaws resilient under high pressure

• Durable nitrile rubber seal for longevity under high pressure

$92.64+GST

$106.54 GST Incl

Polypropylene Rotary Drum Pump

301A

• Flow rates of up to 20L/min

• Polypropylene, teflon & stainless steel construction offer’s excellent chemical resistance

• Unique, rotating 2 piece discharge spout assists fluid transfer

• Suitable for the transfer of herbicides, pesticides, chemicals & mild detergents

• Suitable for 60 or 205L drums & bulk tanks

Polypropylene Syphon Drum Pump

225

$160.30+GST

$184.35 GST Incl

• Plunger action syphon pump can deliver up to 20L/min

• Constructed with a polypropylene pump head & a PTE pick up tube

• Includes a 875mm pick up tube &* a 1.2m delivery hose

• Adjustment knob on the top of the pump can be used to stop the pump from siphoning

$52.20+GST

$60.03 GST Incl

• Suitable for high pressure, heavy duty greasing applications

• 90mm in length

$39.60+GST

$45.54 GST Incl

20L Gear Oil Drum Pump

8828N2

• Capable of delivering up to 110mL per stroke

• Downtube extension & extra Rieke adaptor make the pump suitable for use with a variety of 20L drums

• Incorporates a filter in the drain back holster to protect against foreign particle contamination

• Ideal pump for the transfer of engine, gear, diff & hydraulic oils in busy vehicle servicing workshops

$60.43+GST

$69.49 GST Incl

Manual Waste Oil Extractor

41006N

• 6.5L capacity

• Por table, lightweight & self-contained

• Extracts waste oil from motor vehicles, motor bikes, lawn mowers, marine engines, stationary engines & all-terrain vehicles

• Also suitable for salt water (bilge) & water applications

• Complete with 3 probes to suit various dipsticks & applications

• Ope rates at any angle

$210.80+GST

$242.42 GST Incl

Alemlube 1" Auto Shut Off Diesel Nozzle Alemlube 1L Brake Cleaner Sprayer

51037

• 1" BSP swivel included

• Delivery rates of up to 60L/min

• Maximum working pressure of 80psi (5.5 bar) (Not suitable for gravity feed applications)

• Body: aluminium. Seals: buna-n & viton.

• Outlet spout: stainless steel with viton cased oil seal

• Suitable for applications involving an electric diesel transfer pump only

$207.47+GST

$238.59 GST Incl

*Applies to the vast majority of Alemlube products unless otherwise indicated.

6603A

• Large filling opening

• Safety valve at 36psi (2.5bar) with depressurisation option

• Strong translucent bottle with level indicator

• Easy tool free maintenance

• Not suitable for use with acids

$60.71+GST

$69.82 GST Incl

Air Brake Breakdown Kit

Maintenance Kit For Air Brake Lines

A comprehensive range for trade shops

Heavy Duty Sheetmetal Cabinet30 Compartments

$42527+GST

$489.06 GST Incl.

Air Brake Fitting Assortment

Metric Pipe Thread Fitting Assortment 59pc

A comprehensive range for trade shops

12, 14, 16, 18, 20 & 22mm Plugs

12, 14 & 16mm x 1/8" NPT M/F Adaptors

12, 14, 16, 18, 20 & 22mm x 1/4" NPT Reducing Bushes

22 & 24mm x 3/8" NPT Reducing Bushes

12, 14, 16, 18, 20 & 22mm Hex Sockets

12mm x 1/8" BSP Reducing Nipples

12, 14, 16, 18 & 20mm x 1/4" BSP Reducing Nipples

22mm x 3/8" BSP Reducing Nipples

F/F Mini Ball Valve

(M/F) Mini Ball Valve

F/F Lever Handle Ball Valves

RMC Gas Ball Valves are a proven industry leading design and come in a variety of sizes and configurations.

RMC can also supply a range of fittings (compression, capillary and more) to suit most connection needs.

Forged DZR Brass Body

Bottom loading, dual O-Ring sealed stem

Resilient seats

Straight through (M&F, F&F) versions

Long life performance through its high quality components.

Engine Cleaning Gun

$3625+GST

$41.69 GST Incl.

Zinc

NEW

PRODUCT

BELT DRESSING

It forms a non-drying, water resistant film that extends belt life by reducing belt tension, slipping and dirt build-up. Belts remain pliable and will not glaze or harden while squeaking noise will be reduced.

• Suitable for multi-ribbed belts, alternator steering and other accessory belts

• Eliminates squealing

• Extends life of old and worn belts

• Acts as a conditioner

• Non-tacky, non-drying, water resistant film

CRC ZINC IT

• 95% highest purity zinc in the dried film, fuses directly to iron or steel surfaces

• Provides a unique coating that can be welded through

• Same advantages as hot-dip galvanising

• Exceptional rust protection

• Excellent adhesive qualities

• Forms a tough coat for long-term protection

• Resistant to salt corrosion, water and heat

• High Heat Resistance. Up to 500°C

• Corrosion Protection Factor 72 (up to 6 years outdoors, depending on conditions)

CRC GALV TOUCH UP

• Colour matched to new galvanised steel

• Durable epoxy coating

• Fast drying, ready to use, bright silver paint

• New galvanized steel appearance

• Long term protection of steel with effective corrosion resistance

• Excellent adhesion & durability

*Purchase any product from the CRC 5-56 range and enter on the CRC website to go into the draw to win a $2000 Prezzy card. One prize of NZD $2000 will be gifted in the form of a Prezzy card. Visit www.crc.co.nz for terms & conditions. Promo period: 01/10/2023 to 31/12/2023.

CRC BLACK ZINC

• High levels of anti-corrosive zinc complexes in the dried film, embedded in a protective enamel coating

• Satin finish

• Colours conform to British Safety Colour standards

• Excellent adhesive qualities

• Forms a tough coat for long-term protection

• Heat Resistance. Up to 120°C

• Corrosion protection. Corrosion Protection Factor 36 (up to 3 years before recoating is necessary, depending on conditions) • Fast drying

WELD ANTI-SPATTER

• Does not interfere with post-weld coatings

• Prevents flash rust of in-process and surrounding metal surfaces

WELD ANTI-SPATTER WATER BASED

• Water soluble

• MPI approved C12

• Solvent free

• Easy removal of welding spatter

• Suitable on steel, stainless steel and aluminium

• Non-flammable

• Contains no silicones or petroleum chemicals

CRC 808 SILICONE

• Multi-Purpose Product

• Revives, lubricates, waterproofs, cleans and shines

• Clear, odourless, non-staining

• Harmless to most materials. Metals, plastics, rubber, adhesives, wood, fabrics, glass, inks and paints

• Reduces friction and wear

• Reduces noise

• Extends product life

• Excellent mould release, parting agent and machine bed lubricant

• Resists Moisture

• Stays in place in damp environments

•

AEROCLEAN DEGREASER

• Highly concentrated jet to penetrate the grease and grime build-up

• Easy & convenient

• Restores & enhances the appearance of your engine

• A unique combination of surfactants, detergents and solvents

• Cleans concrete floors and driveways

• Non-corrosive

• Water wash-off with no residue

• MPI Approved C12

CRC LECTRA CLEAN

• Non-flammable, no flash point

• Can be used on energised equipment

• Rapid and complete evaporation

• Leaves no residue, no rinsing or wiping required

• Quickly penetrates into hard-to-reach areas

• Chemically stable, inert

• Non-conductive and non-corrosive

• Contains no lubricants, silicones, oils

• MPI Approved C12.

• Neutral cure, non-corrosive

• Contractors grade silicone

• Single component, fast curing silicone

• Acetic cure for extra bond and increased strength

• Ideal for glazing

• 100% RTV silicone

• Permanently flexible

• Waterproof sealant

• Excellent adhesion

• Withstands NZ conditions

• Resists cracking, shrinking and vibration

• Bridges gaps up to 8mm

• Contractors grade silicone

ADOS MS HIGH PERFORMANCE SEALANT

• Excellent adhesion strength

• To a wide range of substrates commonly used in the building, construction and engineering industries

• Resistant to adverse weather conditions and UV exposure

• Cured product can be painted with most solvent and water based paints and varnishes

• Excellent bond strength, tear resistance and elasticity is maintained over time, even years after application

• Waterproofs, bonds and seals

• Neutral cure

• Contains no acids

• Extreme flexibility

• No cracks and no signs of aging •

ADOS RTV NEUTRAL CURE

ADOS RTV ACETIC CURE

125mm 1350W

Angle Grinder

WE13-125QUICK

Longer service life, more power: the Metabo

Marathon-motor with patented dust protection

Low-vibration side handle Metabo VibraTech (MVT)

Tool-free adjustable guard; twist-proof

53” Trolley 10 Drawers

INOX Safety Angle Grinder

WEV17-125QUICKINOX

Perfect processing of stainless steel

Marathon-motor longer service life

Tool free, fast disc change at the touch of a button with the Metabo

M-Quick-System

230mm 2400W Safety

Angle Grinder

WE24-230MVTQUICK

Long service life for demanding applications

Marathon-motor longer service life

Rotating back handle & side handle VibraTech (MVT) low vibration handle

18V 13mm Hammer Drill & 1/2” Impact Wrench Kit

MET18BL2MB2HD5.5CG

2 x 5.5Ah LiHD

Battery Packs

Air-Cooled Charger ASC55

1x metaBOX Case

2300W 355mm

Metal Cut-Off Saw

CS22-355

Powerful metal cut-off saw for cutting of profiles, pipes and rods made of steel, NF metals, iron and cast profiles

Quick clamping device with variable mitre setting for angled cuts from -15° to 45°

•

POLAR PRO Work Lights

Rechargeable

COB

goes right up to 36mm sockets and 19mm ring spanners. Packaged in a blow molded case.

Commercial Air Evaporators

The BE commercial evaporative air cooler which utilises the natural process of using evaporation to cool the air. Evaporative cooling is a cost-effective way to keep you cool in the summer.

Polarised Safety Glasses from Mack

A Polarised green lens completely eliminates glare Blocks 100% UVA, UVB and C harmful rays

Medium impact, Wraparound frame, Anti-scratch

Approved Standards: AS/NZS 1337.1

$4339+GST $49.90

Built with sustainable certified microfiber, Cordura mesh, webbing, laces and components in the footbed. Lightweight and flexible.

WIDE FIT, Aluminium safety toe, Water resistant, anti-penetration sole Polyurethane outsole with anti-static, oil resistance and slip resistance.

2210.3 :2009

$17383+GST

Battery Charger

6/12/24 Volt Charger.

2/10/20 Amp Selectable on 6/12 Volt.

2/5/10 Amp Selectable on 24Volt

Electronic Touch Button Control

LED Display shows voltage, current (amps), battery capacity and fault diagnosis.

$34360+GST

$395.14 GST Incl.

Red Defibrillator Metal Cabinet

Robust Steel Bright Red Cabinet, designed for housing defibrillators, either Heartsine or Lifepak. This cabinet has a Transparent Heart Cut out on front for visibility of defibrillator inside.

340mmW x 450mmH x 150mmD

$12857+GST

$147.86 GST Incl.

Lockable Outdoor Defibrillator Cabinet

Weatherproof Outdoor AED Cabinet that opens with an effective lock pad

Made of high quality, 1.5mm cold roll steel. Durable Signage is also weatherproof and long-lasting, made to endure elements. Clear signage allows rescuers to be guided through the rescue process. Glass Window ensures you can see the AED.

$60000+GST

$690.00 GST Incl.

HeartSine Defibrillator

Lightweight and Rugged - The Samaritan PAD is lighter (2.4 lbs) and smaller than other defibrillators. The Samaritan PAD resists shock and vibration and carries an IP56 rating, the industry’s highest rating against dust and water. It can be taken and used virtually anywhere, even in the most inclement conditions.

$3,14286+GST

$3,614.29

Map Gas +Butane Refill

The Hot Devil 400G Trade MAP Gas Cylinder enables you to complete tasks faster and more efficiently using a higher burn temperature than standard propane. Hot Devil Butane is an ultra purified butane which helps avoid gas nozzle blockages caused from waxy deposits found in less pure products.

Lithium Jump Starter

Automatic voltage sensing

Peak current 1200A(12v) 35000mAh Capacity

Back-up power for portable devices

Powerful 3W/250 lumen torch function

Full safety protections

12 & 24V jump starter

Overall weight 2.7kg

$55695+GST

$640.49 GST Incl.

NEW! VIPER MIG135

135 AMP MIG/TIG/MMA

SINGLE KNOB MIG CONTROL

Synergic MIG control takes away the guesswork. Simply select your wire size, then turn the Synergic power knob up or down to suit the heat level required for the job.

•Multi-process MIG, TIG, MMA (Stick)

•MIG Gas, Gasless capability

•1Kg Spool Size

• DC Lift Arc TIG

• Light Weight 5.2kg

Power Supply 230V - 1Ph

Duty Cycle @ 40°C15% @ 135A

I ieff 8.4A

Rated Output 40/16V-135A/21V

Amp Range MIG 40 - 120A

Amp Range TIG-MMA20 - 120A

Rated Power 8.0 kVa

Dimensions (mm) 353x132x250

MIG2O5SS

RAZORWELD MIG205-SS

SMART SET: You select your wire size & gas type, then turn the amps up or down as required.

•Multifunction MIG/TIG/MMA

•200 Amp - 230V

•MIG Gas/Gasless, 5kg Spool Capacity

•Smart Set or Manual Operation

•Spool Gun Ready

•DC TIG – Lift Arc with Euro Connect Torch

•TIG Gas Solenoid, Post-Gas & Downslope

•Compliant to AS/NZ 60974-1

Duty Cycle @ 40°C20% @ 200A

Duty Cycle @ 25°C45% @ 200A

Current Range MIG 30 - 200A

Current

C/w 3m XA24 Suregrip™ Mig Torch, Arc Set x 4m & Regulator.

Euro Connect Tig Torch is optional and extra

ARC200 PFC

ARC2OOPFC

C/w Fixed Mig Torch, Earth Lead, Drive Roll Set, 1kg Spool Gasless Wire.

VIPER CUT 30MKII PLASMA CUTTER

30 AMP - CLEAN CUT 10MM STEEL LONG LIFE CONSUMABLES

• Modern IGBT Technology

• Pilot Arc Non Contact Start

• 10mm Clean Cut on Steel

• Contact Start Capable

• Drag Cutting Capable

• High Quality Surecut SC40 Torch

• Pre-set Air with Auto Drain

• Generator Compatible 7.5KVA

•Intelligent Synergic Control

•Power Factor Correction (PFC)

•MMA (Stick) with Adjustable Anti-stick, Hot Start & Arc Force

•DC-TIG - Smart Lift TIG

•Wireless Remote Control Ready

•Generator Compatible

•Compliant to AS/NZ 60974-1

Power Supply 240V - 1Ph

Duty Cycle @ 40°C25% @ 200A @ 25°C40% @ 200A

Current Range MMA 20 - 200A

Current Range TIG 10 - 200A

OCV (VRD Off)78V

Rated Power6.8 KVA Weight7.6kg

C/w Arc Lead Set x 4m Tig Torch is Optional & Extra

200 AMP DC MMA/TIG CLEAR VISION TECHNOLOGY $879.00 GST Incl. $76435

Power Supply 240V - 1Ph

Duty Cycle@ 40°C15% @ 30A

Current Range 20 - 30A

Rated Input7.5 kVA

Rated Output92V

Cutting Thickness - Clean10mm Steel

Cutting Thickness - Sever12mm Steel

Air Flow Draw170 (L/min)

Air Pressure70-87 psi

Dimensions (mm)534x166x343

Weight 8.5kg

Certification ApprovalAS/NZ 60974-1

C/w SureCut™ SC40 Plasma Torch x 4m & Earth Lead x 3m

XA-CUT30VMK2-K $996.00

SPARKO MIG DIP NOZZLE GEL

Sparko Nozzle Dip Gel is an advanced, non toxic, nozzle dip gel for the prevention of spatter adhering to sensitive components of welding torches, including the interior and exterior of MIG nozzles and the serfuace of contact tips.

ANTI-SPATTER AEROSOL SPRAY ALLOWS SURFACE PAINTING AFTER USE

SILICONE FREE - BENZENE FREE - NON FLAMMABLE - CFC FREE

Xcel-Arc Anti-Spatter Spray is engineered to protect torch parts, tooling, and fixtures from spatter build-up. A convenient solvent-based, quick-drying aerosol that allows for pre-heat, higher duty cycles, and higher temperature applications. The special formula allows surface painting after use. Xcel-Arc Anti-Spatter Spray is anhydrous without silicone.

XA1390/S

$900

$10.35 GST Incl.

XATK3 - VALVED TIG TORCH PACKAGE

XA17V x 4m TIG Torch 35-50 Surelok Connector, 10N31 Collet Body 1.6mm, 10N32 Collet Body

2.4mm,10N23 Collet 1.6mm, 10N24 Collet

2.4mm,10N49 Nozzle #5 Ø8mm, 10N48 Nozzle #6 Ø9.5mm,Thoriated Tungsten 1.6mm & 2.4mm, Parts Box

XATK11 - VALVED TIG TORCH PACKAGE

XA26V x 4m TIG Torch 35-50 Surelok Connector, 10N31 Collet Body 1.6mm, 10N32 Collet Body

2.4mm, 10N23 Collet 1.6mm, 10N24 Collet

2.4mm, 10N49 Nozzle #5 Ø8mm, 10N48 Nozzle #6 Ø9.5mm, Thoriated Tungsten 1.6mm & 2.4mm, Parts Box

XATK13 - VALVED TIG TORCH PACKAGE

XA17V x 8m TIG Torch 35-50 Surelok Connector, 10N31 Collet Body 1.6mm, 10N32 Collet Body

2.4mm,10N23 Collet 1.6mm, 10N24 Collet

2.4mm,10N49 Nozzle #5 Ø8mm, 10N48 Nozzle #6 Ø9.5mm,Thoriated Tungsten 1.6mm & 2.4mm, Parts Box

XATK12 - VALVED TIG TORCH PACKAGE

XA26V x 8m TIG Torch 35-50 Surelok Connector, 10N31 Collet Body 1.6mm, 10N32 Collet Body

2.4mm,10N23 Collet 1.6mm, 10N24 Collet

2.4mm,10N49 Nozzle #5 Ø8mm, 10N48 Nozzle #6 Ø9.5mm,Thoriated Tungsten 1.6mm & 2.4mm, Parts Box

SUSTAINING INDUSTRIAL EFFICIENCY

FLEXOVIT THIN WHEELS GENERAL PURPOSE - METAL

CUT OFF MEGA INOX - ULTRATHIN

• Fast cut reinforced straight wheel for cutting off

• For stainless steel, alloy steels and hard ferrous metals

• New long life formulation

• For stainless steel, alloy steels & hard ferrous metals.

• Fillers free of Iron, Sulphur & Chlorine

• 10 wheels in a handy container

• Excellent depressed centre grinding wheel, for fast stock removal

• For stainless steel and hard ferrous metals

• A24/30T -Aluminium oxide coarse/medium grit hard

NORTON BEAR-TEX NON-WOVEN RAPID BLEND FLAP DISCS 127MM X 22MM

NORTON BEAR-TEX NON-WOVEN RAPID BLEND FLAP DISCS 127MM X 22MM

NORTON BEAR-TEX NON-WOVEN RAPID BLEND FLAP DISCS 127MM X 22MM

• A coarse premium durable nylon fibre bonded to a strong polyester backing

• Premium aluminum oxide abrasive grain coating

• A medium grit non woven disc for moderate material removal and initial blending

• Premium aluminum oxide abrasive grain coating

Pliers

Induction hardened cutting edges. CR-V steel for strength.

Innovative forging technology with proprietary patterning. Improved rivet positioning to provide optimum power transmission for easy cutting.

Pipe Wrench

Small enough to stash in a toolbox, yet big enough to tackle a wide variety of worksite jobs, this industrial-grade pipe wrench from Fuller® tool features precision-milled teeth that will bite into almost anything and won't let go until you're ready.

Socket Set - 162pc

The right selection of tools for almost any mechanical job. Includes a variety of sockets in 1/4, 3/8 and 1/2 inch drive, 72 teeth ratchets, combination spanners, hex keys, nut drivers, assorted screwdriver bits, adapter and bit holder. CR-V steel for strength and durability Fine movement Ratchet for high control Quick release Ratchet Heavy duty storage case

$22133+GST

Assorted Screwdriver Bit Set 80pc

25mm and 50mm bits manufactured from chrome vanadium steel, hardened and tempered with a sand blasted finish. Bit holder with quick release collet allows bits to be expelled quickly and efficiently. Supplied in plastic storage case with plastic inlay to hold the bits securely.

Gravity Spray Gun

High production suction spray gun.

Ideal for auto refinishing.

Fully adjustable wide spray fan pattern

Air Compressor 2.5HP Direct Drive

Groove Joint Pliers

A professional quality Groove Plier that provides a wide jaw-capacity range to grip and turn pipes, fittings, fasteners and other items. An adjustable pivot point allows for moving the lower jaw up or down a grooved channel to set the distance between the jaws.

Torque Wrench

A professional grade 1/2 inch drive torque wrench which can apply 42-210Nm. It has a polished finish for corrosion protection and an easy to read etched torque scale around the shaft. Knurled handle for stronger grip.

Long Hex Key Set 22pc

Combination, Metric and Imperial combo

Hex key set with holder. High quality industrial grade professional tools. Made with Eklind Alloy Steel and heat treated for optimum strength and ductility. Finished with Eklind black finish to resist rust.

Reversible Jaw Wrench

A Reversible jaw with xtra capacity allows working with bigger diameter nuts and pipes with the same adjustable wrench. Professional multipurpose adjustable wrench. Double Scale (mm. and inches.)

Pistol Grip Gas Torch

Adjustable swirl flame

Super-MAP gas bottle included Suitable for Propane and Super-MAP gas

Air Compressor 16cfm

Automatic STOP/START pressure switch (PS) control and automatic free-running air governor (AG) control. Heavy duty cast iron pump has cast iron cylinders, air cooled by a large fan-type flywheel. Efficient air intake filters reduce noise and low revving speed extends pump life.

$2,14500+GST

$2466.75

CHAMPION ASSORTMENTS

KOMELON 20M X 10MM UNIGRIP ERGO LONG STEEL CLOSED TAPE

KOMELON 30M X 13MM UNIGRIP FLX F/GLASS OPEN TAPE

KOMELON 50M/165FT X 13MM UNIGRIP FLX F/GLASS OPEN TAPE METRIC/IMPERIAL DUAL SIDE

KOMELON 100M/330FT X 13MM UNIGRIP FLX F/GLASS OPEN TAPE METRIC/IMPERIAL DUAL SIDE

KL987XLCOMBO-2B

KL987XLCOMBO-3B

Crimping Tool Kits

Ratchet mechanism crimper stands for superior labor saving

Quick insertion changing of jaw without any tool

Professional AISI 4140 Alloy Steel Crimping Jaws

Ergonomic comfort-grip handle Blow Case

Tool Chest Set 63pc

Includes: Pliers, Hex Key Wrenches, Combination Wrenches, Chisel Punches, Screwdrivers, 1/2 Drive Socket Set. Plus more tools & accessories

$64500+GST

$741.75

Screwdriver Set 20pc

Selection of flat, phillips, pozi & square screwdrivers plus a ratcheting screwdriver & hex bits.

Especially designed for the NZ Market. Contains the most popular sizes and styles.

Pliers Set 4pc - Agriculture

Pick of the best KNIPEX pliers for maintenance work on the farm.

Includes:

- Combination Pliers 200mm

- TwinGrip Pliers 200mm

- CoBolt Compact Bolt Cutters 200mm

- Cobra Water Pumnpo Pliers 250mm

$26000+GST

$299.00

End Nippers 280mm

The longer handles gives extra leverage and cutting power, and makes it easier to reach work lower to the ground.

$6948+GST

$79.90 GST Incl.

CoBolt® Compact Bolt Cutter 200mm

#1 Pliers for cutting fencing wire in NZ

- Easily cuts medium hard wire up to 5.2mm

- Single handed operation

- Proven performance

$12087+GST

$139.00

Combination Socket Sets

29 piece ¼" drive

Metric 4-14mm (satin finish)

Imperial 3/16" - 9/16" (mirror)

43pc 1/2" Drive

Metric 8-32mm (satin finish)

Imperial 3/8" - 1 ¼" (mirror)

16 & 21 mm Spark Plug Socket

Combination Wrench Sets

Chrome Vanadium Steel High Torque Performance: 1.6 times ANSI & DIN Professional Quality

Maximum Durability and Corrosion Resistance Unique Carry Handle Pouch

Purple StripX Disc

Ideal for surface preparation of metal surfaces priorto painting, cleaning up welds, injection moulds and gasket removal leaving a smoother finish than the traditional wire brush.

TwinGrip Pliers 200mm

These will become your "Go To" pliers for removing screws with stripped heads and rounded nuts/bolts up 22mm.

$6948+GST

$79.90

Heavy Duty Diagonal Cutters

Very hard working and long lasting cutters that are an essential in everyone's tool kit.

Cobra® Set 3pc

Legendary water pump pliers from KNIPEX have a strong grip with no slip, and fine adjustment for best fit.

Sizes: 125, 180, 250mm

$22522+GST

$259.00 GST Incl.

Viper Jobber Drill

The Viper Bit has been developed specifically for the industrial trades person and the home handy person. For machine and hand held drilling in a wide range of ferrous & non-ferrous materials such as steel, aluminium, brass, wood & plastics.

Die Grinder Kit

Sutton Tools Die Grinder is the perfect tool for detailed metal or woodwork providing precise clean cuts. Use it with Sutton Tools range of carbide burs to sculpt and shape harder materials. Suitable for grinding back and neatening welds, porting, polishing and woodworking applications.

Hacksaw Frame - Soft Grip

Sutton Tools Hacksaw Frames are professional, ergonomically designed for two handed operation, and constructed from sturdy anodised aluminium. Ideal for cutting off materials and is built for builder, tradesman and DIY use.

L- Wrench Ball End 2 Pack

Sizes: 050-3/8"" + 1.5-10mm

Assembled from our most popular sets

Bi Metal Hacksaw Blades

Evacut

Locking Clamp - T Slot

Ideal for securing materials to workbenches which feature a t-track. Jaws locks automatically with highest tip pressure without needing adjustments

Ideal for mechanics and general purpose. Made of Protanium steel Lifetime warranty Precision machined Made in the USA $4769+GST

$6154+GST

Engineer Precision Square

P&N Workshop Precision steel squares are used for setting and checking jobs where extreme accuracy is required.

Pry Bar Set

Features square shanked bars with angled heads and plastic grip handles

Suitable for automotive, industrial and hardware applications

Manufactured from high quality alloy steel with industrial black finish for strength and durability.

$4235+GST

$48.70

Hollow Wad Punch Set

For stamping out or producing gaskets and seal rings from materials such as rubber, leather, felt, plastic, cork, fabric or similar components. Multi-layered wooden boards or polyamide boards should be used as a base impact support for stamping

Size Range: 3 - 19mm, in increments of 2mm. Made in Germany

$16500+GST

$189.75

Chrome Vanadium steel for durability and rust prevention.

Breaker Bar 1000mm

¾” Drive

Manufactured from heat treated drop forged chrome vanadium steel with corrosion resistant mirror-chrome finish Square drive design with 180° rotating head for increased versatility

This breaker bar features an extra heavy duty design with a much thicker neck and robust bar compared to normal breaker bars.

$10900+GST

Strike thru Pry Bar Set

Steel cap for striking applications, suitable for heavy duty automotive & truck work Strike-thru design with heavy duty steel end cap allows continuous blows without flaring handle

Slip resistance handles manufactured from PVC with rubber moulded grips.

$8175+GST $94.01

Long series Pin Punch

Forged, hardened chrome vanadium steel

Tempered to a hardness of 54-58HRC throughout the tool, the striking head however, is treated to 38-46HRC to reduce danger of splintering

Pin Punches can be reground repeatedly and still retain their full effectiveness

Contains 5 pieces - 4,5,6,8 & 10mm x 175mm in length Made in Germany

$6255+GST

$71.93

EC-EMV6

Vice Engineers 150mm

Brand: ECLIPSE

Specifications

Jaw Width 150mm / Throat Depth 86mm

Opening 168mm / Clamping Force 3000kgf

MW-110-20DBL

Precision Vernier Caliper 0-200mm

Brand: MOORE & WRIGHT

Specifications

0-200mm / 0-8” Resolution

0.05mm / 1/128”

Length of Jaws 40mm

$198.18 excl.GST

$227.91 incl. GST

$278.18 excl.GST

$ 319.91 incl. GST

EC-E10CR

$28.30 excl.GST

$ 32.55 incl. GST

Locking Plier Curved Jaw 250mm

Brand: ECLIPSE

Specifications

Max Jaw Capacity 45mm - Ideal for HVAC, Welding, Automotive, Plumbing, Electrical & Woodworking

EC-2760C

Compact Heavy Duty Lever Arm Riveter

Brand: ECLIPSE

Able to pull up to 6.4mm alloy and S/Steel rivets For use with 2.4mm, 3.2mm, 4.0mm, 4.8mm and 6.4mm rivets with less force than traditional riveters

3 piece jaw mechanism Handy rivet stem collector bottle

$70.82 excl.GST

$ 81.44 incl. GST

MW-CSM300

Traditional Precision Combination Set Metric

Brand: MOORE & WRIGHT

Specifications

$309.09 excl.GST

$ 355.45 incl. GST

0-300mm - Fully hardened and tempered precision rules with deeply etched graduations on both sides for ease of reading and long life. Fully hardened and ground datum faces to resist wear

Centrally mounted protractor vial allows unrestricted viewing

Protractor has full 360 degree scale plate, graduated 0-180 degrees

Check out the range at your local TradeZone Outlet

EVERYWHERE YOU NEED US TO BE

We are a fair-minded company and try to exceed the requirements of the "Fair Trading" legistration. Prices are current for the period denoted on the front cover. Stocks are not always available in all stores all the timebut we will try our best to obtain more or equivalent substitutes. Errors and omissions are rare but can happen, so we apologise and try to take all reasonable measures to fix the any issues for you.