REELS
EXCEED
SW
Since years the Exceed SW has been taken as example of the best reel in its category for heavy fishing from the boat. It has become so popular you can even find some models that tries to imitate it! All these imitations usually fail their attempt because always lacking of something, that is essentially the quality. And despite a lower quality they are even more expensive, without any technical motivation. All this could be enough to feel proud of ourselves, to have believed since the beginning to the possibility to build a superior quality reel at a price that can be defined reasonable and that everybody can buy. After a so long time from his first launch on the market, the Exceed SW continues to find the favour of anglers and the glory of numerous fishing reports thanks to its great strength, reliability and endurance. It has been used fishing with heavy metal jigs, and so it went under strong and continuous stress; it has been used for Bluefin tuna spinning, and it never gave any signal of failure; finally it has been taken to vacation in the tropical seas, where suffered the worst treatment you can imagine, for days and days. Not a single one of these experiences ever harmed it, or just dip into its “skin” (by the way it’s “skin”, or to better say its body, is made of a noble alloy made of Aluminum, Silica, Copper and Magnesium). If you don’t like compromises forget the rest and just fish with an Exceed SW!
FEATURES
• Stainless Steel Drive gears, Pinion gear & Oscillation-Pinion gear • Max drag 30 Kg (66lb) • Gear box lubrication port / hole • Al-Si-Cu-Mg Aluminium alloy body / rotor / bail arm assembly • Manganese bronze alloy oscillation gear • Non reversible LARGE one-way bearing (permanent one-way) • Stainless steel backup anti reverse pawl • Positive-Screw-lock CNC handle & knob • Twin Ball bearing spool (for high speed drag runs) • Stainless steel and carbon textile drag washers, fine adjustment from full release to full lock with super smooth all the way
194 | Trabucco Product Guide 2017
• Fully sealed Body & Drag (100% water proof reel) • No rust Polyester (Metaformaldehyde) Bearing line level pulley • Titanium Line roller • Solid 4mm bail wire • All Stainless steel alloy for all other metal components • 10+1 S. S. shielded bearings • Gear ratio 4.1:1
Code 032-67-700 032-67-800 032-67-990
Model 7000 8000 10000
Wt 763 845 855
Gear Ratio 4.1:1 (88 cm) 4.1:1 (95 cm) 4.1:1 (101 cm)
Spool Capacity 40 lb - 300 m 50 lb - 490 m 50 lb - 570 m
Max Drag B.B. 30kg 10+1 SS 30kg 10+1 SS 30kg 10+1 SS