LONG POLE
DREAM TEAM
XTR POWER CARP II
Pole featuring remarkable power and exceptional balance, whose structure is completely put over, including the top section that offers a wide top bore of 4 mm. Designed for commercial carp job, it fits the Strippa System, a SiC lined hole which enables to extract the elastic during the fish fight, actually adjusting the tension as needed to bring the fish to the landing net. Made from High Resistance carbon, it’s finished with a special ultra-smooth paint which makes it pleasant to use and prevents it from sticking to the hands when the rod is not dry. The Power Carp is supplied with an extra kit of two sections, also prepared with the Strippa System, while further kits of 2 or 3 sections can be purchased separately. Code Description 131-86-850 Dream Team XTR Power Carp II 131-86-710 Dream Team XTR Carp Top 2 131-86-720 Dream Team XTR Carp Top 3
Length 8.00 2.60 3.80
Ø 40 -
C. Length Wt 140 820 128 70 135 155
In the bottom area of second section you find a 4 mm wide hole, SiC lined for total protection, that enables to adjust the elastic tension during the fight.
DREAM TEAM
Sect. 6 2 3
POLE PACK • 1x Dream Team XTR Power Carp II 8.00 m • 1x Kit 2 Carp (2,60 m)
Just make a loop at the end of the elastic, which will be useful to pick it up as a handle, leaving a relatively long barb. A rubber bead will prevent the knot from entering the hole when the tension will be maximum.
XTR MARGIN CARP 6004
Specially developed for commercial close-in fishing, which of course meets his peak during summer months when carp patrol the bank’s step to look for food. The High Resistance carbon blank can face the toughest battle, even though the chance to drive the elastic through the dedicated door (XTR Strippa on section nr. 2, now larger than ever with 4 mm width) reduces the stress on the pole because most of the fight is run with rod tip in line with the rig. Nothing to do with those standard commercial “speedy” poles, which aren’t speedy at all because the pressure on fish is so high to cause panic, with longer fight time and growing chances to miss a few fish. Easy to clean, the rod’s surface has been slide finished (Trabucco A.S.E.F.) to smoothly run forth and back by hundreds of times. The XTR Margin Carp has all sections put-over, including top with 4 mm bore, and is supplied with an extra 2 section’s kit (2,60 m), exactly same as the top two sections of the pole. Further kits of 2 or 3 sections - all fitting Strippa System - can be bought separately.
POLE PACK • 1x Dream Team XTR Margin Carp 6.00 m • 1x Kit 2 Carp (2,60 m) Code Description 131-86-750 Dream Team XTR Margin Carp 131-86-710 Dream Team XTR Carp Top 2 131-86-720 Dream Team XTR Carp Top 3
Length 6.00 2.60 3.80
Ø 33 -
C. Length Wt 160 430 128 70 135 155
Sect. 4 2 3
DEMON POLE Developed to fight with any particularly strong fish, which may submit the pole to extreme pulls, this series is available in three lengths to enable the user to get a tailor made rod, according to the personal fishing style and the environments that he usually attends. The strong carbon and fiberglass composite is completely put over, except for the top, to allow fishing even close in, during the summer season. The tubular top section can be chopped down to adapt it to different size elastics of different diameter, but it can also be completely removed in case a particularly powerful elastic should be needed.
Code Description 131-90-600 Demon Put Over Pole 6.0 131-90-700 Demon Put Over Pole 7.0 131-90-800 Demon Put Over Pole 8.0
Length 6.00 7.00 8.00
Ø 35 37 40
C. Length Wt 115 430 115 630 115 830
Sect. 6 7 8
WWW.TRABUCCO.IT | 7