TROLLING & JIGGING
RETRIEVE PER CRANK SE30W - 115 & 45 cm SE30WL - 115 & 45 cm SE50W - 108 & 39 cm
Fantastic reels made by Maxel and included in the SeaEagle range, featuring a modern look and exclusive details. Total reliability and strength are the two essential characteristics that have marked the development and production of these reels, all associated with a unique design, precision engineering and materials totally immune from problems caused by saltwater. Each single component was created to get the very best, starting from the frame, obtained from a 6061-T6 tempered aluminum block known in the naval and aeronautical industry for its torsional resistance properties, to consider the stainless steel gears, aluminum spool and sealed ball bearings. SeaEagle reels are available in sizes from 30lb up to 50lb, all equipped with dual speed and an extremely progressive and powerful clutch, based on carbon disks to handlee the reaction of the toughest marine species without overheating. The stainless ainless steel handle culminates with a special asymmetric “T” T” knob that assures total control of all operations.
WEIGHT SE30W - 1340 g SE30WL - 1370 g SE50W - 2120 g
PRE-SET & DRAG LEVER. ag Maxel pre-set knob and drag lever are designed user-friendly endly for precise and constant drag ag settings from FREE (no drag pressure), e), to STRIKE (where you fight the fish), until FULLL (provides extra drag pressure when you need it). Turn the pre-set knob clockwise for more drag pressure, sure, counter-clockwise for less drag pressure.
• Fantastic double speed ed trolling reel • 6061-T6 machined one piece aluminum frame • Cold forged aluminum m spool and side plates • Precision-machined stainless steel gears • Carbon-based contaminant-resistant minant-resistant drag materia • 4 shielded stainless steel ball bearings • Extremely tight tolerance ance to prevent
• • • • •
EVA BAG Supplied with a practical protective EVA bag, tailor made to fit the reel and closed at the bottom by a Velcro band that leaves the foot uncovered. Therefore, the reel can be wrapped by the bag without removing it from the rod’s reel seat.
line eating Heavy duty stainless steel drive and spool shafts CNC aluminum anodized reel foot Main shaft bearing stabilizer prevents excessive side pressure on spool bearings New power T-Bar handle for increased comfort and torque Stainless steel rod clamp and harness lugs
Code Model Gear Ratio Spool Capacity 030-03-030 SE30W 4.3:1 / 1.7:1 30 lb - 700 yds 030-03-035 SE30WL 4.3:1 / 1.7:1 50 lb - 570 yds 030-03-050 SE50W 3.6:1 / 1.3:1 50 lb - 850 yds
Max Strike 12.50 kg 12.50 kg 17.50 kg
Full Drag B.B. 14.50 kg 4 14.50 kg 4 20.50 kg 4
T-BAR HANDLE The exclusive ergonomic TBar handle is able to provide maximum cranking power with minimal effort. T-Bar actually makes the most of hand, wrist and forearm. Construction material has been chosen not to burn hands even if sun exposed during Summertime.
4 HIGH-TECH COLD FORGED SPOOLS. Thanks to Maxel expertise and the latest cold forging technology applied during productions stages, the super strong, cold forged aluminum spool and side plates stand up to line pressure and hard fighting stresses.
ANTI CORROSION STAINLESS STEEL BEARINGS. Maxel use top quality shielded stainless steel ball bearings assure corrosion resistance and smooth operation on line release and recovery. WWW.TRABUCCO.IT | 207