Configure TP-Link RE200 Extender | tp-link re200 ethernet setup

CONFIGURE TP-LINK RE200 EXTENDER Dteailed process of Configure TP-Link RE200 Extender with

tplinkrepeater.net and 192.168.0254. Also prior check list for TP-Link RE200.

W W W . T P L I N K - R E P E A T E R . N E T

HOW TO CONFIGURE TP LINK EXTENDER RE200 INTRODUCTION

The TP-Link RE200 Range Extender helps to boost Wi-Fi signal to dead zones or hard-to-wire areas seamlessly. RE200 is also compatible with 802.11b/g/n and 802.11ac Wi-Fi devices and it has a dual-band speed for 2.4GHz and 5GHz up to 750Mbps. The design of the RE200 extender is easy to plug-in installation and the small size makes it flexible to relocate easily. The Ethernet ports allow the RE200 to work as wireless adapter to connect wireless devices.

PRIOR TO CONFIGURING, DO CHECK THE CONNECTIONS: 1. Firstly plug in RE200 into a wall socket close to router.

2. Also, connect your RE200 to your device through Ethernet cable. In case you find that Ethernet connection is not available, then connect TP-Link extender with wireless network (default network name is TPLINK_Extenderxxxxxx, no password required) through your devices like (PC/pad/phone).

TP-LINK RE200 RANGE EXTENDER: 1. Firstly you need to log in using its default IP: 192.168.0.254 to Web GUI of RE200 or via domain name: TP-Linkextender.net or TPLinkrepeater.net.

2. Here follow Quick Setup and then click to “Next”.

3. Now you need to select your Region and then click to “Next”.

NOTE: In case you select “Copy from Main Router/AP”, then RE200 will have an equivalent Wi-Fi name as your main Router/AP. during this way you’ll found out a roaming network: your wireless clients can switch to the wireless network with the higher signal strength either from your main Router/AP or your RE200.

CONTACT US: CALL NOW:- +91-9802041268

SEO@TPLINK-REPEATER.NET

https://bit.ly/376yTQh