Megger Baker Electric Motor Analyzers The Baker Instruments family of electric motor analyzers provides a comprehensive suite of tests which characterize the health of your motors and generators. These testers are valuable in industrial settings for predictive maintenance, and in motor repair/rewind shops for troubleshooting and QA.
DX
AWA-IV
n
High voltage tests, Surge, Surge PD, IR, DAR, SV, Ramp and HiPot from 4kV up to 15kV
n
Winding Resistance, Inductance, Capacitance, Impedance, RIC test, D/Q
n
Test results can be stored on the DX or transferred to PC for analysis and reports with Surveyor DX software
Static Motor Analyzer
AWA-IV
DX
Static Motor Analyzer
NetEP
NETEP
n
n
Permanently installed, fully automated machine system monitoring solution which evaluates each component of the electromechanical system and identifies electrical and environmental factors that will accelerate insulation degradation The system continuously acquires health and performance data on up to 32 electric motors and the rotating machine systems they operate
Adjustable IR from 10v up to 1kV and 200GΩ using: 3 Phase Spot, PI, DAR, IRt and Guard Terminal
n
4 wire Low Resistance (uni and bidirectional measurements) , LCR, Temperature, Motor rotation, diode test
n
Voltage (measures ac 10 mV up to 1000 V; dc 0 to 1000 V; TRMS), Frequency (15Hz to 400Hz), Phase Rotation
www.megger.com/baker n 800-752-8272
n
Test results can be stored on the AWA or transferred to PC for analysis and report generation
n
The Megger Baker EXP4000 is a portable Dynamic Motor Analysis System
n
Test domains: Power quality, machine performance, current, spectrum, torque, variablefrequency drives, continuous monitoring, transient analysis (e.g. start-up), motor efficiency
High Voltage Motor Tester
PPX
MTR105
n
Low resistance measurements from 1mΩ to 800Ω
PPX
Rotating Machine Tester
Full colour graphic display built to CAT III, IP54 and for use up to 3000 metres,
n
Dynamic Motor Analyzer
MTR105 n
High voltage tests, Surge, IR, DAR, SV, Ramp and HiPot from 2kV up to 12kV
EXP4000
EXP4000
Site Installed Dynamic Monitoring System
n
n
For high voltage machines and large form-wound coils, the Baker PPX series extends HiPot and Surge test voltages of the DX and AWA up to 40 kV.
n
Available models: PPX30 (30 kV) - PPX40 (40 kV) - PPX30A (30 kV with armature testing capability)
