Tobee® 10/8F-AH Slurry Pump Always do your best
Technical Specifications
Design Features • Bearing assembly – a large diameter shaft with short overhang minimizes deflection and contributes to long bearing life. Only four through bolts are required to hold the cartridge type housing in the frame. • Liners – easily replaceable liners are bolted, not glued, to the casing for positive attachment and ease of maintenance. Hard metal liners are completely interchangeable with pressure moulded elastomer. • Elastomer seal rings back all liner joints. • Casing – Casing halves of cast or ductile iron with external reinforcing ribs provide high operating pressure capabilities and an extra measure of safety. • Impeller – front and rear shrouds have pump out vanes that reduce recirculation and seal contamination. Hard metal and moulded elastomer impellers are completely interchangeable. • Cast in impeller threads require no inserts or nuts. High efficiency and high head designs are also available.
Tobee® Heavy Duty Slurry Pumps The heavy duty AH slurry pump range is designed to perform continuous pumping of highly abrasive/dense slurries in processes from hydrocyclone feed to regrind, flotation and tailings in minerals processing plants as well as other industrial applications. • Ball mill discharge • Bottom/fly ash, lime grinding • Coal • Coarse sand • Coarse tailings • Dredging • FGD • Fine tailings • Flotation • Heavy media • Minerals concentrate
• Mineral sands • Ni acid slurry • Oil sands • Phosphoric acid • Phosphate matrix • Process chemical • Pulp and paper • Rod mill discharge • SAG mill discharge • Wet crushers
• Throatbush – wear is reduced and maintenance simplified by the use of tapered mating faces to allow positive accurate alignment during assembly and simple removal. • One-piece frame – a very robust one-piece frame cradles the cartridge type bearing and shaft assembly. • An external impeller adjustment mechanism is provided below the bearing housing for easy adjustment of impeller clearance.
Executive Standards • Design Standard Hydraulic Institute 6, ISO 9001, ISO 14001, OHSAS 18001 & CE certified. • Material Standard AS 2027 Grade Cr27, ISO 21988 Grade Cr27, ASTM A532 Grade III Type A • Castings Dimensional Standard ISO8062 • Performance Test Standard ISO9906, ISO2548, ISO3555 • Vibration Standard ISO2372
Above: Metal Lined, Rubber Lined, Polyurethane Lined, Ceramic Lined is available
• Noise Standard ISO3746 • Hydrostatic Test Standard ANSI/HI 1.6-2000