Convenience Store Lighting Products

eLucent™ WP Series LED Wall Pack WPFC Series WP00 Series Dark Sky Compliant

WPDS Series Dark Sky Compliant

WWPW

Family Model WPFC40 WPFC60 WPFC90

WP0040 WP0060 WP0090

Product Description

W

eLucent™ WP Series LED Wall pack is designed for applications that require lighting with a long life and low maintenance requirement.

WPFC40

With effective thermal management, corrosion-resistant, and die-cast aluminum enclosure with an architectural dark brown finish, eLucent™ WP Series LED Wall provides glare free, uniform illumination while providing a safe and comfortable visual experience. eLucent™ WP Series LED Wall pack adopts high luminous efficacy SMD LEDs. They are available in 40 watts, 60 watts and 90watts.

With superior 60%-90% energy savings, compared to halogen lamp or a metal halide lamp, eLucent™ WP90 achieves a superlative luminous flux of 8500 lm and only consumes approximate 90 watts.

W WPFC60 & WPFC90

High lumen output, energy-efficient optical control and easy universal installation features confirm the eLucent™ WP Series LED Wall as the absolute choice for indoor and outdoor illumination.

Performance Summary

W WP0040

Power consumption 40W

60W

90W

Lumens

4000 lm

6000 lm

8500 lm

PF/THD

>0.9/<15%

>0.9/<20%

>0.9/<20%

CCT: 5700 K Color Accuracy: CRI 85, R9>20 L70 lifetime: 130,000h W WP0060 & WP0090

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com

Ordering Information Typical Order Example: WPFC60HU570000 SERIES

HOUSING

WATT

VOLTAGE

CCT

CONTROL

OPTIONS

WP=Wall Pack

FC=Full Cutoff

40=40W 60=60W 90=90W

HU=100-277V

57=5700K

00=non-dimming

00=Default

Product Specifications CONSTRUCTION & MATERIALS Type

WPFC40 WPFC60 362*293*230 mm 465*350*232 mm Dimension (14.25*11.54*9.06") (18.31*13.78*9.13") Housing Die-cast aluminum Lens Type Glass

WPFC90 WP0040 465*350*232 mm 363*230*195 mm (18.31*13.78*9.13") (14.29*9.06*7.68")

WP0060 465*230*244 mm (18.31*9.06*9.61")

WP0090 465*230*244 mm (18.31*9.06*9.61")

ENVIRONMENTAL SYSTEM Work Environment Operating Temperature

Indoor and outdoor use -20℃~60℃(-4~140℉)

OPTICAL SYSTEM Type Luminous Flux Luminous Efficacy Color Temperature CRI Lumen maintenance at 6000h

WPFC40/WP0040 4000 lm Typ. 100 lm/W 5700 K 85 99%

WPFC60/WP0060 6000 lm

WPFC90/WP0090 8500 lm

WPFC40/WP0040 100~277VAC/0.31A 0W 40W <15% >0.9

WPFC60/WP0060 100~277VAC/0.48A 0W 60W <20%

WPFC90/WP0090 100~277VAC, 0.75A 0W 90W <20%

ELECTRICAL SYSTEM Type Input Voltage Off State Power Power Consumption THD Power Factor REGULATORY & VOLUNTARY

QUALIFICATIONS

ETL & cETL Listed (ETL No.: 4003329) DLC, LM79 CE, RoHS

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com

eLucent™ WP Series LED Wall Pack

SIDE

BOTTOM

BACK

TOP

Project

Type

Catalog #

EconoPak

DESCRIPTION EconoPak is a multi-purpose LED luminaire designed for indoor and outdoor area lighting applications. Delivering maximum lumens for 142,000 hours* while using only 30 Watts of power, its compact design with enclosed power supply make it ideal for such applications as flood lighting, sign lighting, landscape and general area lighting. The EconoPak can be mounted to a wall, ceiling or conduit, making it one of the most versatile LED luminaires in the market.

Wall Mount Luminaire

FEATURES l

l l l

Powered by a constant current power supply to achieve maximum efficiency (see separate data sheet) IP65 ingress protection Designed to meet Class 2 safety requirements 5-year warranty

CERTIFICATION l l

UL Listed USA+Canada File # E352127 LM-79 Test Report ENERGY DATA Input Voltage (V AC)

120 - 277

System Level Power (W)

30

Delivered Lumens (Lm)

2500

System Efficacy (Lm/W)

82

Correlated Color Temp (K)

5000

Minimum CRI

70

LED L70 Lifetime (Hrs)*

142,000

Operating Temp (ºC)

-20 to 40

† US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

SPECIFICATIONS Dimensions (in)

7.75 x 6.625 x 4.25

Units/carton

1

Net weight

5.4 lbs

Environmental Rating

Wet

ORDERING INFORMATION Example: TL-WMB301-01-BZ

TL

WMB301

01

Series TL

Color WMB301

01

BZ

Bronze

WH White

Specifications and dimensions subject to change without notice.

|

DATASHEET 04.23.2014

|

|

|

|

Project

Type

Catalog #

DESCRIPTION The Canopy Star canopy LED luminaire from US LED is a perfect solution for parking structures, shopping area walkways, petrol stations and exterior canopies. The Canopy Star LED canopy is surface mounted for easy adaptation with a typical mounting height of 10 to 25 feet. Designed to illuminate area features with sharp, accurate color to increase security and visibility, the Canopy Star is cost effective to install and will replace conventional fluorescent, HPS and metal halide lighting.

Specifications and dimensions subject to change without notice

FEATURES l l l l l l

Remarkable light output using only 94 Watts Class 2 compliant design (low voltage, limited power) L70 lifetime of 173,000 hours* Luminaire is IP66 compliant Protective coating added to resist corrosion 5-year warranty

CERTIFICATION l l l

UL 1598 certified by Intertek (ETL 4006735) DesignLights Consortium qualified LM-79 available

ENERGY DATA Input Voltage (VAC) System Level Power (W) Delivered Lumens (Lm) System Efficacy (Lm/W) Color Temperature (K) Color Rendering Index L70 Calculated Life (Hrs)* L85 Calculated Life (Hrs)* Operating Temp (ºC)

FIXTURE ORDERING INFORMATION Example: CNP1-50

CNP1

50

Series

Color Temp (K)

CNP1

120 - 277

347-480

94

102

9300

9300

99

91

5000

5000

80 min

80 min

173,000

173,000

79,000

79,000

-40 to 50

-40 to 50

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

SPECIFICATIONS Dimensions (in)

18.62 x 18.62 x 2.75 1

Units/carton

50 5000K

Net weight Environmental Rating

9 lbs Wet

POWER SUPPLY INFORMATION Example: PUC-UNV1-3570

Series

Type

Drive Current

PUC

UNV1- (120-277 VAC)

3570

**PUC

UNV2 - (347/480 VAC)

3570

** High voltage fixture not DesignLights Consortium qualified

US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

Project

Type

Catalog #

DESCRIPTION The Canopy Star canopy LED luminaire from US LED is a perfect solution for parking structures, shopping area walkways, petrol stations and exterior canopies. The Canopy Star LED canopy is surface mounted for easy adaptation with a typical mounting height of 20 to 30 feet. Designed to illuminate area features with sharp, accurate color to increase security and visibility, the Canopy Star is cost effective to install and will replace conventional fluorescent, HPS and metal halide lighting.

Canopy LED Luminaire Ultra Flux

FEATURES

192 W / 18,000 Lumens

Remarkable light output using only 192 Watts Class 2 compliant design (low voltage, limited power) L85 lifetime of >200,000 hours* Luminaire is IP66 compliant Protective coating added to resist corrosion 5-year warranty

l l l l l l

CERTIFICATION l l l

UL 1598 certified by Intertek (ETL 4006735) DesignLights Consortium qualified (**Low voltage) LM-79 available ENERGY DATA Input Voltage (VAC) System Level Power (W) Delivered Lumens (Lm) System Efficacy (Lm/W) Color Temperature (K) Color Rendering Index L85 Calculated Life (Hrs)* Operating Temp (ºC)

FIXTURE ORDERING INFORMATION Example: CNP2-50

CNP2

50

Series

Color Temp (K)

CNP2

120 - 277

347-480

192

210

18,000

18,000

94

86

5000

5000

70 min

70 min

> 200,000

> 200,000

-40 to 45

-40 to 45

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

SPECIFICATIONS Dimensions (in)

18.62 x 18.62 x 2.75

Units/carton

50 5000K

Net weight Environmental Rating

1 9 lbs Wet

POWER SUPPLY INFORMATION Example: PUC-UNV1-7140

Series

Type

Drive Current

PUC

UNV1- (120-277 VAC)

7140

**PUC

UNV2 - (347/480 VAC)

7140

** High voltage fixture not DesignLights Consortium qualified

US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

Specifications and dimensions subject to change without notice

DATASHEET 05.06.2014

iBrightâ&#x201E;˘ 16W DLC IPS T8 LED Tube

Ordering Information Typical Order Example: T8ID12HU40F000 SERIES

GENERATION

SIZE

VOLTAGE

T8=T8 Tube

ID=DLC IPS

12=1.2m/4ft HU=100-277VAC

CCT 40=4000K 50=5000K

Lens Type F= Frosted Lens C= Clear Lens

Product Specifications CONSTRUCTION & MATERIALS Dimension Housing Finish Color Lens Type

4ft/1.2m Extrusion Aluminum and PC diffuser Silver Clear/Frosted

www.atgelectronics.com Toll free: 877-461-5333 E-mail: sales@atgelectronics.com

OPTIONS 000=Default

ENVIRONMENTAL SYSTEM Work Environment Operating Temperature

Indoor use (applicable for dry environments) -20~60℃ (-4~140℉)

OPTICAL SYSTEM Luminous Flux Luminous Efficacy Color Temperature CRI Lumen maintenance at 6000h

1600 lm 100 lm/W 4000K & 5000K 80 98.11%

ELECTRICAL SYSTEM Input Voltage/Current Off State Power Power Consumption Power Factor THD

100~277VAC 0W 16W >0.92 <20%

REGULATORY & VOLUNTARY QUALIFICATIONS Design Lights Consortium ETL/cETL CE, RoHS

www.atgelectronics.com Toll free: 877-461-5333 E-mail: sales@atgelectronics.com

iBrightâ&#x201E;˘ 23W DLC IPS T8 LED Tube

Ordering Information Typical Order Example: T8ID12HU40F023 SERIES

GENERATION

SIZE

VOLTAGE

T8=T8 Tube

ID=DLC IPS

12=1.2m/4ft HU=100-277VAC

CCT 40=4000K 50=5000K

Lens Type F= Frosted Lens C= Clear Lens

Product Specifications CONSTRUCTION & MATERIALS Dimension Housing Finish Color Lens Type

4ft/1.2m Extrusion Aluminum and PC diffuser Silver Clear/Frosted

www.atgelectronics.com Toll free: 877-461-5333 E-mail: sales@atgelectronics.com

OPTIONS 023=23W

ENVIRONMENTAL SYSTEM Work Environment Operating Temperature

Indoor use (applicable for dry environments) -20~60℃ (-4~140℉)

OPTICAL SYSTEM Luminous Flux Luminous Efficacy Color Temperature CRI Lumen maintenance at 6000h

2300LM 100 lm/w 4000K & 5000K 80 98.11%

ELECTRICAL SYSTEM Input Voltage/Current Off State Power Power Consumption Power Factor THD

100~277VAC 0W 23W >0.92 <20%

REGULATORY & VOLUNTARY QUALIFICATIONS Design Lights Consortium ETL/cETL CE, RoHS

www.atgelectronics.com Toll free: 877-461-5333 E-mail: sales@atgelectronics.com

Project

Type

Catalog #

DESCRIPTION

QubeLot2

The QubeLot2 evenly illuminates walkways, streets and parking areas. The classic design of this luminaire seamlessly blends into all forms of architecture. Highly efficient and long-lasting, the QubeLot2 is an ideal replacement for HID. Exceptional high-brightness LEDs result in higher light levels and significant energy savings. High-efficiency 5200K LEDs mounted to a metal-core circuit board and aluminum heat sink, ensure optimal thermal management and long life (L85 124,000 hrs).

Parking Lot Luminaire 4-Qube

FEATURES AND SPECIFICATIONS l

Type 5 medium light distribution and Type 2 medium distribution pattern available

l

Comes fully equipped with power supply

l

Bi-level light option available for dimmed-down lower power operation

l

EPA rating of fixture is 0.7/sq ft and mount is 0.13/sq ft

l

5-year warranty

CERTIFICATION l

UL Listed USA and Canada File# E338791

l

DesignLights Consortium qualified

3-QUBE

4-QUBE

ENERGY DATA Input Voltage (V AC)

ENERGY DATA 120 - 480

System Level Power (W)

Input Voltage (V AC)

104

Delivered Lumens (Lm)

9300

System Efficacy (Lm/W)

136

Delivered Lumens (Lm)

89

Correlated Color Temp (K)

120 - 480

System Level Power (W)

12,300

System Efficacy (Lm/W)

5200K

90

Correlated Color Temp (K)

5200K

L70 Calculated Life (hrs)*

289,000

L70 Calculated Life (hrs)*

289,000

L85 Calculated Life (hrs)*

124,000

L85 Calculated Life (hrs)*

124,000

Minimum CRI

65

Operating Temperature (°C)

Minimum CRI

-40 to 45

65

Operating Temperature (°C)

-40 to 45

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors.

SPECIFICATIONS

SPECIFICATIONS

Dimensions (in)

25.2 x 12.7 x 3.3

Units/carton

Dimensions (in)

1

Net Weight

14.5 lbs

Environmental Rating

25.2 x 12.7 x 3.3

Units/carton

1

Net Weight

Wet

16 lbs

Environmental Rating

Wet

ORDERING INFORMATION Example: QL2-1-UNVL-4-5M-52-0

QL2

1

52

Series

Variant Input Voltage # of Qubes

Light Dist Pattern

Color Temp

Options

QL2

1

52

0 0-10V Dimming

UNVL 120-277

3

5M 5 Medium

UNVH* 277-480

4

2M* 2 Medium

5200K

1 Photocell Socket 2 **DynaDimmer 3 **Photocell Socket & DynaDimmer

* Not DesignLights Conortium qualified ** Note: Options 2 and 3 not available with UNVH Input Voltage

Specifications and dimensions subject to change without notice.

Horizontal mounting only

DATASHEET 05.06.2014

Project

Type

Catalog #

DESCRIPTION

Dorado

The Dorado 6-Qube is an LED luminaire designed to be mounted vertically or horizontally in outdoor applications. High-performance LEDs provide light where you need it, at a fraction of the operating cost of HID technologies. With a lifetime of more than 200,000 hours*, the Dorado is the ideal replacement for 1000W metal halide fixtures. Slip-fitter, Pole Mount or Trunnion Mount options are available for easy and fast installation.

6-Qube Area Light Fixture

FEATURES l

Slip-fitter, Pole Mount and Trunnion Mount options available

l

Three light distribution patterns: Type 5M, Type 3M, and 120° angle

l

5-year warranty

CERTIFICATION l

UL approved (#E338791)

l

LM-80 pending

ENERGY DATA

l

LM-79 pending

Input Voltage (VAC) System Level Power (W)** Delivered Lumens (Lm)

120-277/347-480 288 30,800

System Efficacy (Lm/W)**

107

Correlated Color Temp (K)

5000K

L70 Calculated Life (hrs)*

>200,000

L85 Calculated Life (hrs)*

182,000

Minimum CRI Operating Temperature (°C)

70 -40 to 40

* US LED product ‘Lifetimes’ refer only to the LED light engine, not the power source, and are based on the Illuminating Engineering Society’s TM21 methodology based on 25°C/77°F ambient temperature. The lifetimes are solely meant to be a guide for expected LED degradation and not a warranty or predictive of their actual life, which can be affected by ambient temperatures and other factors. ** Measured at 277 VAC

SPECIFICATIONS Dimensions Units/carton Net Weight Environmental Rating

23.3” x 21.0” x 7.1” 1 26 lbs Wet

ORDERING INFORMATION Example: QD1-1-UNVL-5M-50-6-0

QD1

50

6

Series

Color

Voltage

Light Dist Pattern

Color Temp

# of Qubes

Options

QD1

1 Bronze

UNVL 120-277

5M

50 5000K

6 6-Qubes

0 None

2 White †

UNVH 347-480

3M

3 Black †

12

1 Photocell Socket

† Special order, not stocked Specifications and dimensions subject to change without notice.

DATASHEET 04.04.2014

ILTCaseLight

CaseLight is DLC Listed!

LED Refrigerated Case Lighting System

Make Your Prepared Foods POP With CaseLight™ LED Modules!

• Easily Replace Existing Cooler/Freezer Display Case Fluorescent Lights • Easy Mounting Using TEK Screws or VHB Foam Tape When Space is Limited • No Need to Empty Shelves!

• Lower Energy Bills and No Burned Out Bulbs!

• Long Fixture Life - YEARS vs. Weeks/Months • Low Maintenance-5 Year Warranty on CaseLight Modules & Power Supplies • DLC Listed - Eligible for ALL Rebates • CaseLight Modules Made in the USA Improving on the success of ILT’s previous CaseLight modules for refrigerated/freezer display cases, ILT’s new, more efficient CaseLight module has even lower power consumption and higher overall optical performance for your reach-in coolers and freezers. For Retrofit or New cases, ILT CaseLight can be installed easily and cost-effectively.

LED-based CaseLight modules provide all of the advantages of LED-based lighting including much longer life (greater than 50,000 hours), much lower energy consumption and much better lighting characteristics - brighter light focused on the merchandise. Plus all of ILT’s CaseLight modules are DLC listed qualifying for maximum utility rebates 45-Plus Years of ILT Lighting Experience Goes Into Every CaseLight

ILTINNOVATIONS

International Light Technologies, Peabody, MA (USA) • 45 Years of Lighting Experience – We Know Light!

Part Number

Description

Color Temp. (K)

Lumens

Energy (Watts) Life (Hours) CRI (Typical)

ILT48-BAO-W50CE

CaseLight, 48”, Brite Anodize, Center unit

5000

1200

15

50000

85

ILT48-BAO-W50LE

CaseLight, 48”, Brite Anodize, Left unit

5000

600

7.5

50000

85

ILT48-BAO-W50RE

CaseLight, 48”, Brite Anodize, Right unit

5000

600

7.5

50000

85

ILT48-BAO-W40CE

CaseLight, 48”, Brite Anodize, Center unit

4000

1160

15

50000

85

ILT48-BAO-W40LE

CaseLight, 48”, Brite Anodize, Left unit

4000

580

7.5

50000

85

ILT48-BAO-W40RE

CaseLight, 48”, Brite Anodize, Right unit

4000

580

7.5

50000

85

ILT48-BAO-W35CE

CaseLight, 48”, Brite Anodize, Center unit

3500

1160

15

50000

85

ILT48-BAO-W35LE

CaseLight, 48”, Brite Anodize, Left unit

3500

580

7.5

50000

85

ILT48-BAO-W35RE

CaseLight, 48”, Brite Anodize, Right unit

3500

580

7.5

50000

85

ILT60-BAO-W50CE

CaseLight, 60”, Brite Anodize, Center unit

5000

1600

20

50000

85

ILT60-BAO-W50LE

CaseLight, 60”, Brite Anodize, Left unit

5000

800

10

50000

85

ILT60-BAO-W50RE

CaseLight, 60”, Brite Anodize, Right unit

5000

800

10

50000

85

ILT60-BAO-W40CE

CaseLight, 60”, Brite Anodize, Center unit

4000

1547

20

50000

85

ILT60-BAO-W40LE

CaseLight, 60”, Brite Anodize, Left unit

4000

773

10

50000

85

ILT60-BAO-W40RE

CaseLight, 60”, Brite Anodize, Right unit

4000

773

10

50000

85

ILT60-BAO-W35CE

CaseLight, 60”, Brite Anodize, Center unit

3500

1547

20

50000

85

ILT60-BAO-W35LE

CaseLight, 60”, Brite Anodize, Left unit

3500

773

10

50000

85

ILT60-BAO-W35RE

CaseLight, 60”, Brite Anodize, Right unit

3500

773

10

50000

85

ILT70-BAO-W50CE

CaseLight, 70”, Brite Anodize, Center unit

5000

2000

25

50000

85

ILT70-BAO-W50LE

CaseLight, 70”, Brite Anodize, Left unit

5000

1000

12.5

50000

85

ILT70-BAO-W50RE

CaseLight, 70”, Brite Anodize, Right unit

5000

1000

12.5

50000

85

ILT70-BAO-W40CE

CaseLight, 70”, Brite Anodize, Center unit

4000

1940

25

50000

85

ILT70-BAO-W40LE

CaseLight, 70”, Brite Anodize, Left unit

4000

970

12.5

50000

85

ILT70-BAO-W40RE

CaseLight, 70”, Brite Anodize, Right unit

4000

970

12.5

50000

85

ILT70-BAO-W35CE

CaseLight, 70”, Brite Anodize, Center unit

3500

1940

25

50000

85

ILT70-BAO-W35LE

CaseLight, 70”, Brite Anodize, Left unit

3500

970

12.5

50000

85

ILT70-BAO-W35RE

CaseLight, 70”, Brite Anodize, Right unit

3500

970

12.5

50000

85

Power Supplies ILT-LPF-40-24 40 Watt, UL Class 2, 100-277VAC input, 24VDC output ILT-CEN-60-24 60 Watt, UL Class 2, 100-277VAC input, 24VDC output ILT-D24V100UNVA 100W, UL Class 2, 120-277VAC input, 24VDC output

10 Technology Drive, Peabody, MA 01960 978-818-6180 978-818-6181 fax www.intl-lighttech.com

International Light

Te c h n o l o gi e s

Installation Instructions Note – Wiring and mounting instructions are applicable for both center and end units Model Numbers – Example ILT60-BAO-W50CE ILTAABAOWBB CE (AA=Length-inches) (Brite Anodize (BB=color temp) (C=Configuration; E=External Power finish) Supply) ILT48 (48”)

“

35 (3500K)

CE (Center, External Power Supply)

ILT60 (60”)

“

40 (4000K)

LE (Left, External Power Supply)

ILT70 (70”)

“

50 (5000K)

RE (Right, External Power Supply)

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK OR INJURY, OBSERVE THE FOLLOWING: A. Use this unit only in the manner intended by the manufacturer. If you have any questions, contact the manufacturer.

B. Before installing, servicing or cleaning unit, switch power off at the service panel and follow appropriate lock out / tag out safety procedures.

FOR YOUR SAFETY: Read and observe all CAUTIONS and WARNINGS shown throughout these instructions. While performing installations described, gloves, safety glasses or goggles should be worn.

PREPARE ELECTRICAL WIRING: A. Electrical Requirements – This fixture must be powered by a Meanwell, 60W, 24VDC power supply, model CEN-60-24, ILT part number ILT-CEN-60-24, connected to a properly grounded branch circuit, protected by a circuit breaker.

B. Grounding Instructions – This power supply must be connected to a grounded metal, permanent wiring system.

C. Strain Relief Requirements – This fixture is equipped with a cord but no attachment plug.

Therefore, the installer must include a strain relief sized properly for the cable and opening in the junction box it is attaching to. An example is the Heyco Products strain relief, part number 1150, or equivalent if routing wire into a junction box or through an access hole.

CI-101 Rev. A

Page 1

International Light Technolgies 978-818-6180 Brite Energy Solutions 308-367-4542

4/25/2012

TOOLS NEEDED: - Wire connectors - Wire cutters - Gloves - Tape measure - Wire stripper - Safety glasses - Center punch - Power drill - Screwdriver - #6 x 1 1/2” self-tapping screws

Prepare for Mounting Light Fixture to Mullion – using #6 x 1 1/2” self-tapping screws CAUTION – Turn off power to the mullion lighting system before removing any covers.

- Measure the total length of the mullion to determine which model/length unit to install. Center the fixture vertically on the mullion. Mark the top and bottom of the fixture.

- Measure the total width of the mullion and mark a vertical line, ½ the total width near the top, 6” from the top, 6” from the bottom.

- Mark a horizontal line 6” down from the top of the fixture. Mark a horizontal line 6” from the bottom of the fixture.

CAUTION – Prior to installing screws, make sure that there are no existing components inside the mullion in the areas to be drilled. Do not drill through “DO NOT DRILL” label.

- Use power drill and screw bit and install 4, #6 x 1 1/2” self-tapping screws through the center indent of the fixture. Install 2-3 screws, one 6” from top, one 6” from bottom and one in the center if necessary.

NOTE – Starting the screws into the fixture with the fixture outside the cooler may make it easier for installation. Screws can then be fully inserted into mullion while holding fixture in place.

Alternate Mounting Method High quality VHB-type foam tape may also be used to mount the fixtures. − Thoroughly clean the back of the fixture and the mullion surface. − Using 1/2”-3/4” wide VHB tape, apply tap to back surface of fixture to within 3” of top and bottom of fixture.

CI-101 Rev. A

Page 2

10 Technology Dr., Peabody, MA 01960

4/25/2012 978-818-6180 978-818-6181 fax

− Dry fit fixture to mullion. Once fit is confirmed, peel release paper, align fixture and press against mullion for entire length of fixture.

Connect Wiring from Fixture CAUTION – Ensure that all connection points are sealed for damp location using the appropriate method per the NEC or local electrical code.

-

Cut the fixture cable to the appropriate length to terminate to DC power at the Power Supply.

Where necessary, insert the proper strain relief on the cable and secure to hole in mullion or junction box.

Strip the cable jacket and then strip the individual two wires. Attach the Black wire to the Black wire of the power supply using twist-on wire connector. Attach the Red wire to the Red wire of the power supply using twist-on wire connector.

Connect Wiring to Power Supply CAUTION – Wiring to high voltage side of power supply to be accomplished by certified electrician in accordance with NEC or local electrical code.

Trouble-shooting and Maintenance Instructions CAUTION – Turn off power to the mullion lighting system before removing any covers.

The following items can be replaced in the field: - 60W Power Supplies - LED flex strips (access to end of unit required)

TROUBLE-SHOOTING -

If an entire strip of LEDs are not lighted (one of the two strips for a center unit or the one strip of an end unit), either there is a wiring problem to that strip or the LED driver is defective.

Check wiring connections to the unit at the driver. If the connections look OK, proceed to “Replacement of LED Driver”.

If both LED strips are not lighted on a center unit or the single strip isn’t lighted on an end-unit, it is possible that power to the unit has been interrupted. Confirm that the cable to the unit is wired properly and securely to the DC power source.

Replacement of LED Flex Strip - Remove the 2, #4 screws securing the end-cap where the cable exits the unit.

- Slide out the lens on the side of the defective LED flex strip.

- Cut the two wires from the defective LED flex strip about 6” from the end of the strip.

CI-101 Rev. A

Page 3

10 Technology Dr., Peabody, MA 01960

4/25/2012 978-818-6180 978-818-6181 fax

-

Remove the defective LED flex strip by peeling away from the housing.

Install the new LED flex strip by peeling the release tape and sticking to the housing. Start at wired end positioning start of strip about 1â&#x20AC;? from end of housing. Continue down the full strip, pressing in between components to insure a good bond.

Connect Red and Black wires to the wires previously cut. Attach using twist on wire nuts.

Push the wire nuts inside extrusion.

Slide in lens which was previously removed. Re-attach end-caps with 2 #4-40 screws previously removed.

-

Fixture Cleaning Instructions -

The lens and aluminum housing should be cleaned periodically with a mild liquid dish detergent.

Do not use chemical cleaners on the lens.

Keep the outside clean. Wipe with a clean cloth lightly dampened with mild liquid dish detergent. Dry with a clean, soft cloth. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and damage the finish.

-

Door Configurations The ILT-CEN-60-24, 60W, 24VDC power supply can power up to 3 Center units. Here are three typical door configurations and the number of power supplies required for each. # of Doors # of Center # of End Units Units

# of Power Supplies

Notes

3

2

2

1

4

3

2

2

2 Centers-1 End; 1 Center-1 End

5

4

2

2

2 Centers-1 End per P.S.

3

2 Centers-1 End per P.S. It is possible to wire 2 Centers and 2 Ends on 1 P.S.

6

5

CI-101 Rev. A

2

Page 4

10 Technology Dr., Peabody, MA 01960

4/25/2012 978-818-6180 978-818-6181 fax

Page 1 of 4

ATG Electronics® T8 LED Tube（IPS） USER GUIDE

NOTE: Please read this entire manual to fully understand and safely use this product.

Specifications are subject to change without notice. Please visit www.atgelectronics.com for the most recent user guide versions.

Included in this Box ATG Electronics® iBright™ T8 LED Tube (IPS), 1 PCs Wire Nuts, 3 PCs User Guide, 1 Set

Important Instructions 1."NOT FOR USE IN TOTALLY ENCLOSED LUMINAIRES", "NE CONVIENT PAS À DES LUMINAIRES TOTALEMENT FERMÉS", "DO NOT USE WITH DIMMERS", "NE PAS UTILISER AVEC DES GRADATEURS","THIS DEVICE IS NOT INTENDED FOR USE WITH EMERGENCY EXITS", "NE CONVIENT PAS AUX SORTIES DE SECOURS".

2. The LED tube works directly at 100~277VAC. The installer must determine whether they have 100~277VAC at the luminaire before installation.

3. WARNING – Risk of fire or electric shock. LED Retrofit Kit installation requires knowledge of luminaires electrical systems. If not qualified, do not attempt installation. Contact a qualified electrician.

4. WARNING – Risk of fire or electric shock. Install this kit only in the luminaires that have the construction features and dimensions shown in the photographs and/or drawings.

5. Do not make or alter any open holes in an enclosure of wiring or electrical components during kit installation.

6. WARNING – To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or other sharp objects.

7. WARNING: To avoid potential fire or shock hazard, do not use this retrofit kit in luminaires employing shunted bi-pin lampholders. Note: Shunted lamp holders are found only in fluorescent luminaires with Instant-Start ballasts. Instant-start ballasts can be identified by the words “Instant Start” or “I.S.” marked on the ballast. This designation may be in the form of a statement pertaining to the ballast itself, or may be combined with the marking for the lamps with which the ballast is intended to be used, for example F40T12/IS. For more information, contact the LED luminaire retrofit kit manufacturer.

8. Installers should not disconnect existing wires from lampholder terminals to make new connections at lampholder terminals. Instead installers should cut existing lampholder leads away from the lampholder and make new electrical connections to lampholder lead wires by employing applicable connectors.

9. Other warnings will not to lead to misuse.

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com REV1.1

Page 2 of 4

PLANNING THE INSTALLATION Before retrofitting fluorescent luminaires, please make sure the dimensions of existing luminaires are larger than the dimension noted below.

T8 Luminaire Dimensions: (Unit: mm)

Note: 1. “W” represents the Width of luminaire(s), “L” represents the Length of luminaire(s).

2. If working with one-lamp luminaires, W = min. 100 mm If two-lamp luminaires, W = min. 300 mm If three-lamp luminaires, W = min. 450 mm If four-lamp luminaires, W = min. 600 mm 3. For 0.6m LED Tubes, L= 620 mm For 1.2m LED Tubes, L=1240 mm For 1.5m LED Tubes, L=1530 mm 4. This LED tube can only be used in luminaires which contain a maximum of 4 lamps of 0.6 m long and 1.2m long LED tubes, and max. 2 lamps for 1.5m long LED tubes.

ATG Electronics® iBright™ T8 LED Tube (IPS) Specifications Model

Input Voltage

Max Wattage

Dimension

T8ID06HUZZABBB

100~277 VAC

12W

589mm

T8ID12HUZZABBB

100~277 VAC

23W

1199mm

T8ID15HUZZABBB

100~277 VAC

27W

1499mm

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com

Page 3 of 4

Retrofit Luminaires with Electronic Ballast Installation Steps Step 1: Turn off main power before installation.

For safety, make sure main power source is switched off before attempting to install.

Step 2: Take off existing fluorescent light and disconnect the ballast.

Step 3: Cut four leads of G13 lamp holders. (For detailed placement of the cuts, note the X’s on the wiring diagram labeled “Before” shown below.)

Step 4: Reconnect lamp holder leads L and N to the supply wires of branch circuit according to the wiring diagram below. Both G13 sockets of the fixture should be connected to the power source directly.

Step 5: Install fixture as before.

Step 6: Adhere a label to the luminaire to the effect of “This luminaire has been modified and can no longer operate fluorescent lamps.” on the retrofitted luminaire, where readily visible during relamping.

Step 7: Install the LED tube into the fixture.

Wiring Diagram for Electronic Ballast

Before CUT

CUT

After

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com

Page 4 of 4

Retrofit Luminaires with Magnetic Ballast Installation Steps Step 1: Turn off main power before installation.

For safety, make sure main power source is switched off before attempting to install.

Step 2: Take off existing fluorescent light and disconnect the ballast.

Step 3: Cut the ballast output lead and cut the wirings of the starter. Both the ballast and starter need to remain in place. (For detailed placement of the cuts, note the X’s on the wiring diagram labeled “Before” shown below.)

Step 4: Reconnect lamp holder leads L and N to the supply wires of branch circuit according to the wiring diagram below. Both G13 sockets of the fixture should be connected to the power source directly.

Step 5: Install fixture as before.

Step 6: Adhere a label to the luminaire to the effect of “This luminaire has been modified and can no longer operate fluorescent lamps.” on the retrofitted luminaire, where readily visible during relamping.

Step 7: Install the LED tube into the fixture.

Wiring Diagram for Magnetic Ballast

Before CUT

CUT

After

www.atgelectronics.com

Toll free: 877-461-5333

E-mail: sales@atgelectronics.com