Tivoli Architectural LED Lighting Innovations

ARCHITECTURAL 2010

Architectural LED Lighting innovations

Designer Series Launch

DESIGNER SERIES Tivoli's Designer series Covelum LED system allow for endless possibilities to coordinate your design environment with any particular color scheme. Affordable custom colors without the cost of RGB DMX equipment. Almost any color can be created in easyto-replace LED PCB modules. Over 48 colors available and counting, these same LED PCB modules can be used to retrofit older low voltage festoon based incandescent systems.

Coordinated colors to enhance and accentuate design materials through mixing 6 LEDs per PCB to create vivid illumination. Custom color mixes available - Consult Factory

COVELUM LED - DESIGNER COLOR Designed static colors available by Pantone number 48 different colors available, and counting

COVELUM LED - DESIGNER WHITES Tightly binned Whites - available in 13 different color temperatures of white Aqua Mint

Pale Green

Clover Green

Green

Dark Pistachio Lime Green Celery Green Green

Harlequin Green

Green Yellow

Seafoam Green

Light Green Mint Tart Apple Chartreuse

Turquoise

LED BINNING LED binning is the most commonly misunderstood aspect of the LED lamp selection process. During the LED manufacturing process, unique lot numbers assigned to the components provide some means of traceability. Due to typical variations during manufacturing, each light emitting diode will possess and exhibit a unique set of characteristics. Subsequent to testing, optoelectronics with closely related characteristics are grouped into specific bins with pre-defined bin identifiers.

LED manufactures normally bin according to three primary characteristics. The intensity bins segregates components in accordance with luminous output. Color bins provide separation for variations in optical wavelength or color temperature. Voltage bins divide components according to variations of their forward voltage rating.

Tivoli's binning is done in lots and sorted into bins based on wavelength ranges that achieve colors. Tivoli uses a range of 2400°K to 3400°K for warm white, 4500°K to 6000°K for white and 6000°K to 9000°K for cool white. Individual orders are binsorted to within plus or minus 100°K and it is recommended to purchase 10% replacement stock within that bin lot to ensure matched color for needed replacements. White LEDs vary slightly in color temperature from bin to bin.

Tivoli references each bin location number on the packing list and labels it on each LED product accordingly. During installation, it is very important that like bins are located in close proximity for color consistency. The overall color will visually appear consistent even with multiple bins located in surrounding areas. However, if different bins are located in close proximity there may be slight color variations visible.

For example: Bin No. WB3 Bin No. WD3 B3 should be installed close to each other.

D3 should be installed close to each other B3 and D3 should NOT be installed close to each other.

Light Turquoise

French Vanilla

Teal Golden Yellow

Lavender Frost

Amber

Baby Blue Light Muave

Pumpkin Orange Flame Orange

Light Lavender Lavender

Coral Red

Liquid Blue Red

Sky Blue

Dark Pink

Periwinkle Blue

Coral Pink

Royal Blue Ocean Blue

Rasberry Pink

Cornflower Blue Majorelle Blue Blue

Pale Pink Amethyst

Muave

Heliotrope

Lilac

Magenta

Deep Pink

Hint of Pink

Powder Mist

Pink

C ove L I G HT I N G COVELUM ™ DESIGNER SERIES LED Whites

4

COVELUM ™ DESIGNER SERIES LED colors

5

Covelum ™ Led standard

6

Tivoli, the brand you have trusted for over forty

COVELUM ™ LED OUTDOOR

7

years has become the market leader in emerging

Covelum ™ XENON

8

LED linear lighting. Our products are flexible,

PLATINUM COVE LED

9

adaptable energy-saving LED-based linear lighting products for broad architectural/commercial applications, indoors and out. Tivoli's architecturally significant designs provide visible delineation or concealed illumination effects.

The complete line of Tivoli architectural lighting products includes: – Tube, cove, strand, panel, display and cabinet/shelf lighting – Borderline, wall-wash lighting, and specialty lamps

Tu b e L ig h t ing ILLUMILINE ™ 2020 led

14

ILLUMILINE ™ led tubing

15

Incandescent Fastube

16

360° LED fasTUBE

17

versiline ™ led tube

18

Tivalume ™ Led tube

19

tivoflex ™ plus / micro

20

– Guide, wall, seat and step lighting There is no substitute for original Tivoli products others may try to imitate. Our materials and

S P E C I A L T Y L I G HT I N G

manufacturing standards are of exceptional quality.

COLORWASH

26

Our products are made to withstand extreme

beacon outdoor ™ LED

27

environments are ETL, UL and CUL listed and offer

starlight panels

28

extended warranties of up to 3 years for many of our LED products. Tivoli's highly experienced team of professionals offers ongoing support for our customers' complete satisfaction.

S t r a nd L I G HT I N G TWILIGHTS ™ LED

32

LITESPHERE ™

33

tivotAPE ™ static LED

34

tivoTAPE ™ rgb LED

35

ARCHITECTURAL CHANNEL

36

TIVOLITE ™ BULBS

38

TIVOLED ® bulbs

39

2

Cove

l i ght ing

Covelum XENON, Covelum LED and Platinum Cove LED offer compact, flexible,

concealed illumination for interior ceilings and walls.

These energy-efficient, lowmaintenance products feature replaceable light sources and easy installation.

Left: Covelum LED Color: Warm White Dodger Stadium Baseline Club Los Angeles, CA HKS Architects Henri Khodaverdi Photography

Far Left: Covelum LED Color: White Kerasotes Icon Theater Chicago, IL Hurford Architects Weston Imaging Group

C ove L ig h t I N G Tivoli Cove Lighting Comparison Product

Lumens

beam spread

Installation

applications

Covelum LED Designer Series Whites

0.75W/PCB Up to 262.08Lm/Ft

150°

Aluminum mounting channel or clamps

Critical white color applications within +/- 50°K, recommended for illumination within 6” of source and for white backgrounds.

Covelum LED Designers Series Colors

0.75W/PCB Up to 273Lm/Ft

150°

Aluminum mounting channel or clips

For color specific applications to create precise colors correlated to the Pantone color chart.

Covelum LED Standard

0.75W/PCB Up to 278.4Lm/F

150°

Aluminum mounting channel or clips

Covelum LED Standard white – economical version for distances more than 6” from source, not recommended for illumination of white backgrounds.

Covelum LED Outdoor

0.75W/PCB Up to 262.08Lm/Ft

150°

Aluminum mounting channel or clips

Covelum LED Outdoor Standard whites –Wet listed fixture for outdoor applications in standard fixture lengths (not field cuttable) for straight run applications.

Covelum Xenon

3W/5W/8W 2400° - 66.52Lm/Ft

300°

Aluminum mounting channel or clips

Covelum Xenon – replacement for existing retro-illumination applications with historical appearance.

Platinum Cove LED

Piranha 0.31W/PCB

90° Piranha

Triple Chip 0.50W/PCB Up to 166.9Lm/Ft

180° Triple Chip

Mounting channel, angled or vertical mounting clamps

For directional throw of light applications, walkways and bridges.

Indirect light glow effect for outdoor coves, niches, small reliefs, step applications for even illumination within 3" of light source. Economical alternative than the Covelum LED system with up to 40% less output.

3

4

Cov e

l ig ht i n g

Covelum™ Designer Series white LEd for indirect

applications is Tivoli’s innovative answer to the challenge of creating color-temperaturespecific illumination with white LEDs. This architectural-quality system of LED modules is designed to produce appealing, visually consistent high-CRI illumination by using selective “x” and “y” bin-sort combinations along a tight Kelvin range. The Kelvin temperature selections are measured as visual constants to incandescent Black Body temperatures. Covelum LED Designer Series offers lighting designers six color temperatures of Warm White, four of White and three of Cool White.

Right: Covelum LED Color: Designer Series 4700°K White Staples Center - Budweiser Lounge Los Angeles, CA Rossetti Architecture Henri Khodaverdi Photography

C ovelum ™ D esigner series w h i t es Features

• Low maintenance, energy efficient lighting for interior applications • Uses 0.75W, 12VDC LED modules in a fuse style envelope Field cuttable system features dual conductor which bends easily to fit concave and convex curves without special hardware; an exclusive to Tivoli's Covelum LED strand. 2.5" O.C. bends to 90°.

• +/- 45° Directional LED modules (90° total adjustability) offer the ability to manually set the angular throw of light individually, distributing light over a 150° beam spread • Specific color temperature LED modules with tight bin sorting for color consistancy (+/-50°K) • LED life: Rated to LM80 standards – 30,000 hours for all White color temperatures • Full range dimming available • Lamp spacing: 2.5", 3", 4" O.C. • Listed Class I or II 12V DC power supply required

Listing • ETL dry listed for indoor Class I or II applications EFFICACY LM/WT

CRI

LM/FT

Warm White 2400° at 2.5" O.C.

38.47

39.3

138.48

28.85

3.6

0.75

Warm White 2600° at 2.5" O.C.

59.54

40.1

214.37

44.66

3.6

0.75

Warm White 2800° at 2.5" O.C.

64.2

54.8

231.12

48.15

3.6

0.75

Warm White 3000° at 2.5" O.C.

64.75

54.9

233.09

48.56

3.6

0.75

Warm White 3200° at 2.5" O.C.

65.29

59.5

235.06

48.97

3.6

0.75

White 5000° at 2.5" O.C.

66.41

63.3

239.09

49.81

3.6

0.75

White 5500° at 2.5" O.C.

72.8

77.7

262.08

54.6

3.6

0.75

COVELUM LED deSigner series whites

LM/ WT/FT wt/ MODULE module

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.75W design calculations will vary based on power supply and run lengths.

Cove

l i ght ing

Covelum™ Designer Series colors.

Specific color LED modules available according to designer specified Pantone number or CIE X/Y coordinates * Pantone and X/Y coordinate information references the color wavelengths on the spectral locus within the CIE 1931 color space.

Left: Covelum LED Color: Designer Series - Blue Applied Signal Technology, Inc. Anaheim Hills, CA Align Architecture Henri Khodaverdi Photography

C ovelum ™ D esigner series colors additional Features for designer series color

• For color specific applications to create precise colors correlated to the Pantone color chart

Aqua Mint

Pale Green

Clover Green

Green

Dark Pistachio Lime Green Celery Green Green

Harlequin Green

Green Yellow

Seafoam Green

• LED life: – 40,000 hours for all cool color mixes: Blue and Green Hues – 80,000 hours for all warm color mixes: Yellow, Orange and Red hues • Full range dimming available

Light Green Mint Tart Apple Chartreuse

Turquoise Light Turquoise

French Vanilla

Teal Golden Yellow

Lavender Frost

• Lamp spacing: 2.5”, 3”, 4” O.C.

Amber

Baby Blue

• Listed Class I or II 12VDC power supply required • More information on Tivoli Designer series Colormix available at www.TIVOLICOLORMIX.com

Light Muave

Pumpkin Orange Flame Orange

Light Lavender Lavender

Listing

• ETL dry listed for indoor Class I or II applications

Coral Red

Liquid Blue Red

Sky Blue

Dark Pink

Periwinkle Blue

Coral Pink

Royal Blue Ocean Blue

COVELUM LED Designer EFFICACY series color LM/WT

CRI

LM/FT

LM/ MODULE

WT/FT

wt/ module

Cornflower Blue

Standard Color Blue

15.84

n/a

57

11.88

3.6

0.75

Majorelle Blue

Standard Color Green

75.84

n/a

273

56.88

3.6

0.75

Blue

Standard Color Yellow

33.34

n/a

120

25

3.6

0.75

Standard Color Red

44.17

n/a

159

33.13

3.6

0.75

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.75W design calculations will vary based on power supply and run lengths.

Rasberry Pink Pale Pink Amethyst

Muave

Heliotrope

Lilac

Magenta

Deep Pink

Hint of Pink

Powder Mist

Pink

5

6

Cove

l ig ht i n g

Covelum™ LEd standard

offers directional illumination with individually adjustable long life LEDs in White and Warm White. The strip of Covelum LED can be mounted with screw-down clips. Optional clear, frosted or opaque white lenses can be used for creating for soft, diffused effects.

Right: Covelum LED Color: White Movie Tavern Dallas, TX Greg Epstein Photography

C ovelum ™ L E D s t a nd a rd Features

• Use in both low and high ambient light conditions.

• Low maintenance, energy efficient lighting for interior applications • Uses 0.75W, 12VDC LED modules in a fuse style envelope Field cuttable system features dual conductor which bends easily to fit concave and convex curves without special hardware; an exclusive to Tivoli's Covelum LED strand. 2.5" O.C. bends to 90°.

• +/-45° Directional LED modules (90° total adjustability) offer the ability to manually set the angular throw of light individually, distributing light over a 150° beam spread • LED modules available in White, Warm White, All New Blue, Green, Yellow, Red and Orange now available!

• LED life: Rated to LM80 standards – 30,000 hours for White (5500°k +/-500°k), Warm White (2900°k +/-300°k) – 40,000 hours: Blue (470nm), Green (530nm)* – 80,000 hours: Yellow (590nm), Orange (605nm), Red (630nm)*

*

nanometer references the color wavelengths on the spectral locus within the CIE 1931 color space.

• Lamp spacing: 2.5", 4", 6" O.C. • Listed Class I or II 12V DC power supply required

Listing

• ETL dry listed for indoor Class I or II applications COVELUM LED STANDARD

EFFICACY LM/WT

CRI

lm/ft

lm/ module

wt/ft

wt/ module

Warm White 2800° at 2.5" O.C.

64.2

54.5

231.12

48.15

3.6

0.75

White 55 00° at 2.5" O.C.

77.3

78.2

278.4

58

3.6

0.75

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.75W design calculations will vary based on power supply and run lengths.

Cove

l i ght ing

7

Covelum™ LEd outdoor FIXTURES offer low maintenance

cove and pocket illumination for exterior installations.

C ovelum ™ L E D ou t door Features

• Standard fixtures complete with lens mounted on channel, LEDs and outdoor connections • 2.5" O.C. LED spacing with end-to-end fixture mounting in 1', 2', 4', 6' and 8' lengths • Low maintenance, energy efficient lighting for exterior wet location applications • Uses 0.75W, 12VDC LED modules in a fuse style envelope • LED life: Rated to LM80 standards – 30,000 hours for White (5500°k +/-500°k), Warm White (2900°k +/-300°k) • Listed Class I or II 12V DC power supply required

Listing

• ETL wet listed for outdoor use above 3ft from surface for Class I or II applications

2¼"

2¼" 7 16

7 16

7 16 COVELUM LED STANDARD

EFFICACY LM/WT

CRI

lm/ft

lm/ module

wt/ft

wt/ module

Warm White 2800° at 2.5" O.C.

64.2

54.5

231.12

48.15

3.6

0.75

White 55 00° at 2.5" O.C.

77.3

78.2

278.4

58

3.6

0.75

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.75W design calculations will vary based on power supply and run lengths.

8

Cove

l ig h t i n g

Covelum™ Xenon is low maintenance and energy efficient, using frosted or clear xenon lamps for replacement or existing retro-illumination applications. Easily installed with mounting clips or in a channel.

Features a U-shaped clear polycarbonate lens on each socket for heat dissipation while the lamps are protected, yet easily accessed.

Right: Covelum Xenon Kansas City Royals Stadium Kansas City, MO Populous Architects Chris Vleisides - VPS Photography

C ovelum ™ X enon Features

• Field cuttable system, bends easy to fit concave and convex curves without special hardware

Field cuttable system features dual conductor which bends easily to fit concave and convex curves without special hardware; an exclusive to Tivoli's Covelum strand. 2.5" O.C. bends to 90°.

• New 2-wire design allows for 90° corners at 2.5" O.C. without connectors • Use in both low ambient and high ambient light conditions.

• Low maintenance, energy efficient lighting for interior applications • Lamp spacing: 2.5", 3", 4", 6" O.C. • Class I AC power supply required

xENON lamps

• Uses 3W, 5W or 8W, 24V AC Fuse based xenon lamps with 20,000 hour lamp life • Lamp color temperature:

3W: 2,300°K, +/- 100˚ K

5W: 2,400°K, +/- 100˚ K

8W: 2,600°K, +/- 100°K

Listing

• ETL dry listed for indoor Class I applications

COVELUM xenon 2400° at 3" O.C.

EFFICACY lm/ft LM/WT 3.33

66.52

lm/ module

wt/ft

wt/ module

16.63

20.0

5.0

Measurements are based on 24V power and 5.0W design calculations will vary based on power supply and run lengths.

13

Cove

l i g ht ing

9

Platinum Cove is a flexible low-profile, replaceable LED system for recessed or cove applications. This economical 12V DC Class II wire-strand system can be installed quickly and easily into the tightest of spaces.

Left: Platinum Cove Color: Warm White Mandarin Hotel Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography

P l a t inum C ove led Features

• Versatile LED spacing; ¾", 1½", 3" O.C. with 1, 2 or 3 replaceable series LED PCBs operating at .31W (90° Beam Spread Piranha) or .50W (180° Beam Spread Triple Chip) per PCB 12V DC • Color available: Blue, Green, Red, Yellow, White, Neutral White and Warm White • Economical alternative to Covelum LED system with up to 40% less output.

Field cuttable system features dual conductor which easily bends 90° to fit concave and convex curves without special hardware.

• Accessory channel/cover available for moisture resistance • 12V DC Class II power supply required

Listings

• ETL dry listed for indoor Class II applications EFFICACY LM/WT

platinum cove

lm/ module

wt/ft

wt/ module

life 25,000 hrs

Warm White Triple Chip - ¾"O.C.

59.70

159.4

31.29

2.67

1.5

White Triple Chip - ¾"O.C.

62.51

166.90

2.67

1.5

25,000 hrs

Warm White Piranha - ¾"O.C.

15.24

25.30

29.88 6.661 2

0.93

34 40,000 hrs

White Piranha - ¾"O.C.

21.40

35.52

4.74

1.66

0.93

35,000 hrs

Warm White Triple Chip - 1½"O.C.

39.85

79.70

5.22

2.00

0.5

25,000 hrs

3" O.C.

⁄32"

lm/ft

1 ⁄ " O.C. 1.66

⁄ " O.C.

White Triple Chip - 1½"O.C.

41.75

83.50

4.96

2.00

0.5

25,000 hrs

Warm White Piranha - 1½"O.C.

10.19

12.64

1.11

1.24

0.31

40,000 hrs

White Piranha - 1½"O.C.

14.35

17.80

0.79

1.24

0.31

35,000 hrs

Warm White Triple Chip - 3"O.C.

19.92

39.84

2.61

2.00

0.5

25,000 hrs

White Triple Chip - 3"O.C.

20.85

41.70

2.48

2.00

0.5

25,000 hrs

Warm White Piranha - 3"O.C.

5.10

6.32

0.56

1.24

0.31

40,000 hrs

White Piranha - 3"O.C.

7.18

8.90

0.40

1.24

0.31

35,000 hrs

1½"

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.5W design calculations will vary based on power supply and run lengths.

1½"

11⁄2" O.C.

3" O.C.

13

3

⁄8"

⁄32" 1½" 1½"

10

Cov e

Light i n g

Tec hnica l

s p eci ficati ons

a nd

Data

Wall

Lamp Spacing

Candela Distribution

Distance to Wall

Lamp Spacing Covelum Xenon Festoon

LAMP Covelum LED

Yellow, Orange, Red 80,000 hours

Wall

Distance to Wall

Covelum LED Designer Series

12V DC 0.75W Designer Whites 30,000 hours Designer Colors Cool Hues 40,000 hours

cd cd

45°

Distance to Wall

Lamp3" Spacing

4" 6"

* LEDs operate at 80% of design voltage. † Readings at 80% of design voltage.

most appropriate for uniform lighting applications. The chart above is an example of uniform lighting based on spacing between module and distance to surface for even illumination. (See LED spacing guide for recommended distances)

2.5" O.C. Warm White 138

104

35

2

1

Maximum Candela = 138 Located At Horizontal Angle = 0, Vertical Angle = 0 # 1 - Vertical Plane Through Horizontal Angles (0 - 180) (Through Max. Cd.) : BLUE # 2 - Vertical Plane Through Horizontal Angles (90 - 270) : MAGENTA # 3 - Horizontal Cone Through Vertical Angle (0) (Through Max. Cd.) : RED For more details on the IES Photo Metrics Graph, visit http://www.tivolilighting.com/prodsearch.htm under COVE LIGHTING.

* Candela distribution may vary with lamp and power supply conditions.

D-Distance to Wall S-RECOMMENDED SPACING

Distance to Wall

Lamp Spacing

3-5"

No greater than 2.5" O.C.

5-6"

No greater than 4" O.C.

6" or greater

No greater than 6" O.C.

D = Distance where uniform light is desired S = On center lamp spacing

Lamp Spacing Covelum LED

Platinum Cove LED DATA LAMP

Design Voltage* Wattage

lamp life†

Piranha SuperFlux

12V DC

White - 35,000 hours

0.31W each

3

69

LED SPACING GUIDE

Wall

Covelum LED

Candela Distribution

Warm Hues 80,000 hours

Xenon

Wall

0°

* Candela distribution may vary with lamp and power supply conditions.

3" < D < = 4"

Different LED spacings can Design Voltage* Wattage lamp life† create dramatically varied 12V DC 0.75W White, Warm White effects. Tighter spacing is 30,000 hours Blue, Green 40,000 hours

90°

2" < D < = 3"

LED Spacing

Covelum LED DATA

135°

5W Lamp Spacing 2.5"

1 1⁄8" < D < = 2" Lamp Spacing

Covelum designer series colors Pantone correlation chart.

Consult factory for additional colors.

180°

Lamp Spacing Guide Distance to Wall (D) 0 < D < = 1 1⁄8"

Lamp Spacing

3.0" O.C. 5W Frosted

40

Distance

Wall To toselect the lamp spacing LAMP necessary for desired effect, Covelum Xenon Festoon choose a close spacing for 5W 15,000 hours an continuous glow when Lamp Spacing Lamp Spacing Covelum Xenon you have a close distance or 8W 10,000 hours a wider spacing for a softer * Lamps operate at 85% of design voltage. light with a greater distance † Readings at 85% of design voltage. to the wall area to be lit.

(See lamp spacing guide for details) Lamp spacing: 2.5", Wall 3", 4", and 6" O.C. standard.

Design Voltage* Wattage lamp life† 24V AC 3W 20,000 hours

80

Covelum XENON Lamp DATA

purple to blue Pantone #265 Pantone #2645

amethyst lavender

Pantone #264 Pantone #2635

light mauve light lavender

Pantone #2572 Pantone #251

mauve lilac

Pantone #252 Pantone #290

heliotrope baby blue

Pantone #2707 Pantone #7443

lavender frost powder mist

Pantone #2718 Pantone #2726

cornflower blue majorelle blue

blue to green Pantone #660

periwinkle blue

Pantone #285 Pantone #2727

blue royal blue

Pantone #2995 Pantone #3005 Pantone #319 greens

sky blue liquid blue light turquoise

Pantone #3252 Pantone #3262

turquoise teal

Pantone #6265 Pantone #3385

seafoam green clover green

Pantone #353 Pantone #359 Pantone #358 Pantone #332

pale green pistachio green tart apple aqua mint

Pantone #366 Pantone #381 Pantone #375

light green mint chartreuse green yellow

Pantone #7488 Pantone #360

harlequin green dark celery green

Pantone #7481 Pantone #354 pink to red Pantone #217

lime green green

Pantone #190 Pantone #1787

coral pink coral red

Pantone #1777 Pantone #211 Pantone #182

dark pink rasberry pink pink

Pantone #705 Pantone #237

hint of pink megenta

Pantone #2385 red to yellow

deep pink

Pantone #185 Pantone #171 Pantone #1505 Pantone #137 Pantone #108 Pantone #7401

red flame orange pumpkin orange amber golden yellow french vanilla

pale pink

Neutral & Warm White 40,000 hours Blue, Green - 50,000 hours Yellow, Red - 100,000 hours

Ultra Bright Triple Chip

12V DC

0.50W each

White, Neutral & Warm White 25,000 hours Blue, Green - 40,000 hours Yellow, Red - 80,00 hours

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Right: Platinum Cove Atlantis Casino Steak House Reno, NV Associated Lighting Representatives, Inc. Vance Fox Photography

11

12

Tube

l i g ht ing

The visible points of light mounted behind lenticular panels in this application were design criteria for the project designed by Gensler Architecture. LED color consitancy was achieved through specialized binning.

?

Left: Lenticular panels incorporating Illumiline LED Color: White 12301 Wilshire Blvd Los Angeles, CA Gensler Architecture Henri Khodaverdi Photography

L E D a nd I nc a ndescen t T U B E L ig h t I N G Tivoli Tube Lighting Comparison Product

Tubing Profile

lumens

beam spread

applications

Illumiline™ 2020

TT1010 Rigid Polycarbonate ½" x 9⁄16" Rectangular

Warm White 483.6Lm/Ft

120°

Indoor/outdoor high output LED tubing for wall wash, handrail, outdoor coves and niches.

Piranha 90° Triple Chip 180°

Indoor/outdoor directional throw of light applications. For walkways, bridges, outdoor coves, niches, stairwell and step applications for even illumination within 3" of light source.

TT1011 Rigid Polycarbonate ½" x ¾" Rounded Top

Illumiline™ LED Tubing

TT1010 Rigid Polycarbonate ½" x 9⁄16" Rectangular TT1011 Rigid Polycarbonate ½" x ¾" Rounded Top

Warm White 88.31Lm/Ft White 97.69Lm/Ft

Incandescent Fastube™

FTI-03 Semi-Rigid Polycarbonate ¼" x 5⁄16" Rectangular

3.66Lm/Ft

360°

Low light level illumination for accent lighting to replace existing retro-historic indoor/outdoor applications with visible points of light.

White 15.5Lm/Ft

360°

Low light level illumination for accent visible points of light indoor/outdoor applications.

FTI-05 Ultraflex Vinyl ½" dia. Round (3" O.C. minimum)

360° LED Fastube

FTL-03 Semi-Rigid Polycarbonate ¼" x 5⁄16" Rectangular

Tivalume™

Rigid Aluminum extrusion 0.70" dia. Round

280.5Lm/Ft

100°

High output indoor LED under-counter, cabinet, closet, jewelry case, backlighting, miniboard signage and art applications.

Versiline™

Semi-Rigid Polycarbonate ¼" x 5⁄16" Rectangular

White 63.4Lm/Ft

130°

Low output indoor LED fixture for discreet, directional, under-cabinet or shelf applications.

TivoFlex™

LED coextruded PVC color jacket

White 65.73Lm/Ft

180°

Flexible neon replacement for borderline, signage indoor or outdoor applications.

FTL-05 Ultraflex Vinyl ½" dia. Round (3" O.C. minimum)

13

Tu b e

14

l ig ht i n g

ILLUMILINE 2020 is a high

power high efficacy Title 24 compliant outdoor wet listed linear LED lighting fixture.

Featuring 120° Cree® XP-E SMD LEDs mounted on an aluminum PCB, Illumiline 2020 produces up to 483.6 Lumens per foot (Warm White).

Perfect for wall wash, hand rail, stairwell, shelving or any other indirect application.

Right: Illumiline 2020 Color: White Movie Tavern Fort Worth, TX Greg Epstein Photography

ILLUMILINe 2020 Features

• TT1010 rectangular (½" x 5/8") or TT1011 rounded top profile (½" x 3⁄4") tubing available in clear or frosted polycarbonate - Available in 1' and 2' lengths in 2" increments • Cree XP-E 3W SMD LED driven to 1.1W • Average Rated Lamp Life for White LEDs (2800°, 4000°, 5000° & 6000°K): 50,000 hours

Wire Leads (18 Gauge)

• 2" O.C. LED spacing with 120° beam spread • Up to 483.6 Lumens/ft. (Warm White)

9/16"

• Multiple mounting options for varied applications including new directional swivel bracket accessory for angular adjustability and 3" polycarbonate mounting clips

11/16 "

• 10' polycarbonate mounting channel available for linear installations where mounting channel is required • 350mA constant current Class II power supply required

1/2" 5/8"

Listings

Wire Leads (18 Gauge)

120°

• ETL wet listed for indoor or outdoor Class II applications

illumiline 2020 3/4"

1/2"

9/16"

13/16"

11/16 "

Warm White at 2" O.C.

EFFICACY LM/FT LM/WT 73.27

483.6

WT/FT 6.6

Items in bold denote Title 24 High efficacy rating. Measurements are based on 350mA constant current power and 1W design calculations will vary based on power supply and run lengths.

1/2" 5/8"

5/8"

Tube

15

l i g ht ing

ILLUMILINE LED tubing

creates a variety of indirect illumination effects for wall wash, handrails, stairwells, shelves and other indirect applications. ILLUMILINE offers two different LED options: Piranha SuperFlux LEDs have a 90° beam spread and are perfect for direct-angle delineation and effects; Ultra Bright Triple Chip LEDs use high power and have a 180° beam spread for a bright, even glow for enhanced indirect illumination.

Illumiline LED Color: White M&I University Brookfield, WI Zimmerman Architectural Studios, Inc. Weston Imaging Group

ILLUMILINE LED TUBING Features

• TT1010 rectangular (½" x 9/16") or TT1011 rounded top profile (½" x 9/16") tubing available in clear or frosted polycarbonate - Max length: 8' (1" & 2" O.C. spacing) - Max length: 12' (3", 4" & 6" O.C. spacing) • 36" Min. radius (Lateral bend), 24" Min. radius (Concave or convex bend) • 1", 2", 3", 4" & 6" lamp spacing available for varied effects • Up to 97.69 Lumens/ft. (White Ultra Bright Triple Chip LED’s @ 1" O.C.) • Piranha 90° beam spread LEDs emit light forward for direct illumination effects. Illumination intensity is dependent on color, spacing and viewing angle of LED • Ultra bright triple chip 180° beam spread for a bright even glow for indirect illumination effects • Class II 12V DC power supply required Wire Leads (18 Gauge)

Listings

• ETL wet listed for indoor or outdoor Class II applications

illumiline LED

EFFICACY LM/FT LM/WT

WT/FT

Warm White at 1" O.C. - Triple Chip

15.00

88.31

5.89

White at 1" O.C. - Triple Chip

16.70

97.69

5.85

Measurements are based on 12V DC power and 0.35W/LED design calculations will vary based on power supply and run lengths.

9/16" 9/16"

9/16"

3/4"

1/2"

1/2" 1

/2" Rectangular TT1010 Profile Piranha Superflux LED

Rectangular TT1010 Profile /8" Ultra Bright Triple 5Chip LED

Rounded TT1011 Profile 5/8" Ultra Bright Triple Chip LED

3/4"

Tu b e

16

l ig ht i n g

The original tivoli lIGHT TUBING™, products enhance retro-historical applications with visible points of light.

tivoli fastube lighting

in 20-foot standard lengths which can be field cut to any measurement. Installation is quick and simple using standard tube mounting options making custom configuration easy.

Right: Incandescent Fastube Private Residence Seaford, VA Steve Budman Photography

I N C A N D E S C E N T FA S T U B E Features

• Flexible ½" round or semi-rigid ¼" x 5/16" rectangular optically clear vinyl tubing emits light on all sides • 0.9W miniature incandescent lamps (wired in parallel), 40,000 hour rating, 24V

⁄16"

5

• 1", 2", 3", 4" and 6" O.C. lamp spacings for a wide range of dramatic effects. Spacings are approximate based on individual tube lengths ½"

• Wired in parallel (each lamp independantly wired) for field-cut solutions • 10' max. tubing length for 1" O.C. lamp spacing 20' max. tubing length for all other lamp spacings • Maximum lamps per feed: 24V - 200 Lamps • Outdoor applications require exact length measurements for water tight factory end preparation

¼" ⁄16"

5

• Class II power supply required, 24V AC See specification sheet

⁄16"

5

• UL wet listed* for indoor or outdoor Class II applications ⁄16"

5

½" FTI-05 ULTRAFLEX

FTI-03 SEMI-RIGID

¼" ⁄16"

5

½" * Wet listed option requires exact length measurement and weather seal end-prep accessory option.

Tube

l i g ht ing

360° ILLUMINATION LEd light Tubing is designed for areas

requiring light emission in all directions. A low output LED indicator that is field cuttable for easy installation.

Fastube 360° LED in 20-foot

standard lengths which can be field cut to any measurement.

Installation is quick and simple using standard tube mounting options, making custom configuration easy.

Right: 360° LED Fastube Luau Restaurant Beverly Hills, CA Kelly Architects

3 6 0 ° L E D fa s t u b e Features

• Flexible ½" round or semi-rigid ¼" x 5/16" rectangular clear vinyl tubing emits light on all sides • 2", 3" and 4" O.C. LED spacings for a wide range of lamp spacings for varied dramatic effects • 0.24 Watt 360° LEDs emit light on all sides, parallel wired Average Rated Lamp Life for Yellow LED: 100,000 hours Average Rated Lamp Life for Blue, White and Warm White LED: 40,000 hours • Flexible round (½") or semi-rigid rectangular (¼" x 5/16") tubing profile, 12' max.

• Wired in parallel (each LED independantly wired) for field-cut solutions • Foot candle reading at 6" away from light source is 0.66 fc • Outdoor applications require exact length measurements for water tight factory end preparation • 12V DC Static circuit standard (Chase available, consult factory) • Class II power supply required. See specification sheet • UL wet listed* for indoor or outdoor Class II applications FTL-05 ULTRAFLEX

FTL-03 SEMI-RIGID

¼" * Wet listed option requires exact length measurement and weather seal end-prep accessory option.

⁄16"

5

½"

⁄8"

3

17

18

Tub e

l ig ht i n g

Versiline™ is a discreet, versatile LED tubing featuring multiple SMD LEDs in Bright or Ultra Bright spacing options for directional illumination in multipurpose uses including under cabinet & shelving applications.

Versiline’s semi-rigid tubing allows for installation in slightly curved applications and is manufactured in specific lengths.

Right: Versiline LED Tubing Color: Warm White Encore Hotel & Casino Switch Steak Restaurant Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography

V ersiline ™ L E D T U B I N G features

• Compact light source (¼" x 5/16") in tamper-resistant optically clear semi-rigid polycarbonate tubing • Premanufactured in standard 6", 9" and 12" lengths with 24" leadwire/deadend end prep • LED orientation in BT (Bright) and UB (Ultra Bright) configurations • LED are securely mounted in efficient two-LED parings on an insulated circuit board • Coated and insulated LED board • 6 to 18 LEDs per fixture • Yellow SMD LED’s (0.24W/pair) with 100,000 hr lamp life • White and Warm White SMD LED’s (0.24W/pair) with 40,000 hour lamp life • SMD LED’s have 130° beam spread to directionally illuminate any surface area • 12V DC Class II power supply required

¼" 5

∕16"

listing

• ETL dry listed for indoor Class II applications 5

∕8" O.C.

Ultra Bright 2½" O.C. Bright

tube

l i ght ing

19

tivalume™ Rigid aluminum extrusion fixture using high output LEDs for various applications: - Cove and over/under shelf or cabinet lighting - Toe kick, cornice, wall wash and curtain pocket - Edge, accent and artwork lighting - Various mounting options and integrated connectors for continuous illumination - Task or reading light (lumen output equal to T5HO).

Left: Tivalume LED Tube Color: Warm White Luxor Hotel and Casino Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography

t L E D tTuUbBe T iv I v a lume L U me ™led e features

• Discreet minimal size/profile: 0.70"Ø • Fixtures available in 1', 2', 3' and 4' nominal lengths • Frosted Polycarbonate Lens • Hidden end feed connections for continuous appearance • Class II 12V DC input voltage • Wattage per fixture Integrated male/female power connectors allows - 1': 5W/280.5 Lumens - 2': 10.5W/561 Lumens for end-to-end connection without special adapters or hardware.

- 3': 16W/841.5 Lumens - 4': 21.6W/1122 Lumens • Max continuous run length: 8' • 100° Beam Spread • High Efficacy:Approximately 280 Lumens per foot

Approximately 46 Lumens per watt • 0.9W per 3 LED series group space 15/8" (in OC average) for smooth linear output • 3000°K Warm White, 4000°K Neutral White and 5500°K Cool White • 50,000 hour LED life

100°

listing

• UL dry listed for indoor Class II applications

tivalume™ White in 3 Quad Chip LED series group spacing 1-5/8” (averaged O.C.)

EFFICACY LM/FT LM/WT 46.00

280.5

0.70”

WT/FT 6.00

Items in bold denote Title 24 High efficacy rating. Measurements are based on 12V DC power and 0.3W/LED design calculations will vary based on power supply and run lengths.

100°100°

0.70”

100°

20

tub e

l ig ht i n g

TIVOFLEx plus – High output flexible LED light tubing with uniformity of color and glow.

Architectural delineation, unique patterns and signage designs as neon replacement product. For interior or exterior applications.

Patent No. 7,048,413 B2

Right: TivoFlex Color: Blue Jamieson Place Building Calgary, Canada Gibbs Gage Architects John Bilodeau Photography

T I V O F L E X plus / Tivoflex M icro Features

• Improved color rendition and visual clarity with use of Coolto-touch, low heat LEDs ½"* apart that emit light uniformly 3/8" O.C. - TivoFlex Micro * ½" O.C. - TivoFlex Plus • LED encased oval-shaped, flexible PVC constant color lens which can be bent, modified and formed to application • Superior small profile water resistant 90° and 180° power feed connectors for seamless illumination • improved illumination with up to 65 lumens per foot (7 to 10 times brighter than standard TivoFlex) • Satin aluminum channel is standard • Voltage: 24V DC power supply required

Listings

• UL and CUL Listed in compliance with UL standard 2388 for Flexible Lighting • Tivoli exclusive SGS Listed for compliance with UL standards 2108 and 8750 and Canada standard CS 22.2 For LED Lighting products with field installation • IP65 Rated for wet location

installation Tivoflex plus White TivoFlex Plus

EFFICACY LM/FT LM/WT 27.62

65.73

WT/FT 2.38

Measurements are based on 24V DC power and 1' design calculations will vary based on power supply and run lengths.

• Wet Listed power feed connectors are attached at Tivoli's factory • Certifited installation available for field cut options and extended warranty

tube

l i g ht ing

Left: TivoFlex Color: Warm White Gold Lounge Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography

Below: TivoFlex Color: Red Private Residence Newport Beach, CA Lighting Design: Mark Raissen Henri Khodaverdi Photography

Top View

ProfileS

1¼"

Top

Lateral Bend ¾" Min. View Radius

Top View

¾"

“U” channel

5

∕8"

Top Top View View Lateral Bend ½" Min. Radius

1" ∕16"

11

3

∕8"

“U” channel

5

∕16"

TivoFlex Micro Installation

Tivoflex easily installs into Mounting Channel. Channel mounts with screws through base.

Tivoflex

1"

3

ProfileS

∕8"

Side View

1 1Bend ∕8"Min. ¾" 11 ∕16" Radius

TivoFlex

11∕8"

Convex Bend Side View 4" Min. Radius Concave Bend 6" Min. Radius

Lateral

11∕16"

∕8"

7

Side View

Convex Bend 4" Min. Radius Concave Bend “U” 6" Min.channel Radius 5∕16"

Tivoflex

∕8"

Side Side View View

Convex Bend 4" Min. Radius Concave Bend 6" Min. Radius

Tivoflex Micro

21

22

T u b e L i g h t i n g s p e c i f i c a t i o n s , C o n n e c t o r s , Acc e s s o r i e s

Tube Specifications

Mounting and Installation Options

Tivoli offers a number of tube shapes, sizes and flexibilities • Trim, compact profiles create a clean appearance.

• Durable enough to withstand the stresses of commercial applications and are available in a variety of colors.

• UL Flammability Ratings: Series FTI/L-03 & TT1010 = 94 V-2; Series FTI/L-05 = FR-1 • Tube ends are molded Polycarbonate with recessed socket end connectors

Channels Tivoli’s extrusions are recommended for wet, exterior applications, while providing a durable yet flexible channel for Tivoli tubing.

The rugged channel can be recessed or cast into a variety of surfaces such as, concrete, tile or brick. It is easily installed and will create a spectacular lighting effect while enhancing safety.

TUBE Lighting Profiles Rectangular Tube - 1/4" x 5/16" Clear Polycarbonate FTI/L-03 SEMI-RIGID • Clean edge or mortised fit into extrusions for steps and paths, tile,

Channel

woodwork and mirrors; route into floors and walls • Bends to a 6" minimum radius

Features

TC-2015 Polycarbonate “U” Channel

Round Ultraflex Tube- 1/2" dia. Clear Vinyl (Tygon) FTI/L-05 ULTRAFLEX • For use with 360° Illumination LED tubing

7

• Standard for surface mounting, also may be draped or sewn into fabric banners or theatrical curtains • Enough flexibility for contoured forms • Bends any radius with mounting clamps

• Standard for surface mounting • Rigid polycarbonate creates straight linear application effect • Color: Clear 3

/16" 7

/8" 1

/16"

/2"

TC-2030 PVC “U” Channel • Side shape allows for secure

Rectangular Tube - 1/2" x 9/16" Clear Polycarbonate TT1010 SEMI-RIGID • For use with Illumiline LED Tubing • Clean edge or mortised fit

/8"

3

/2"

1

Rounded Top Tube - 1/2" x 9/16" Clear Polycarbonate TT1011 SEMI-RIGID • For use with Illumiline LED Tubing

embedded application to poured cement areas • Enough rigidity to outline any linear form • Flexible • Color: White

Mounting CLips

• Clean edge or mortised fit

CHASE Tube LIGHTING - custom option

PROFILE

MOUNTING

FEATURES

Tube Lighting Round Profiles - FTI-05 - FTL-05

Polycarbonate Mounting Clamps BMC-1/2

• Color: Clear • One screw through side of one-part clamp or one screw through base of twopart clamp

Chase lights can be inserted into 360° Illumination LED Tubing and Light Tubing profiles for decorative and directional purposes. Tivoli chase tubing is a sensible means of communicating and simulating with light.

• Manufactured for 12V DC LED systems or 24V AC incandescent systems • Minimum tube length is 24"; lamp spacing determined by tube length and number of lamps per tube; 24-lamp increments

Tube Light

Extrusion

• Tight interconnection – no gaps – between chase tubes

Incandescent/360° LED Tubing

Extrusion Screw

tubing end prep installation

Tube Light Screw

Tube Lighting Rectangular Profile - FTI-03 - FTL-03

• Complete line of four-channel lighting controllers available, specifically designed for our low-voltage lighting systems

Tube Light

Tube Light

Screw

Extrusion

Tube Light

Extrusion Tube Light Screw

Mounting Bracket Retainer Extrusion Screw

Tube Lighting Profile - TT1010 - TT1011

Mounting Bracket Retainer Extrusion

Mounting Bracket Retainer Tube Light

Screw

Screw

Polycarbonate Mounting Clamps BMC-RECT

Mounting Bracket Retainer Tube Light

Screw

• Color: Clear • One screw through side of one-part clamp or one screw through base of twopart clamp

Tube Light

Extrusion Screw

Tube Light

Extrusion

Tube Light Screw

Screw

Polycarbonate • Color: Clear Mounting Linear • One screw Clip -3" ChannelDrill - 10' Countersink through base ILT-MCL ILT-MCH-10 Hole of clip

End Cap

3" Mounting Bracket LED Light Tube

END PREP: EPCLED Notching for corner installations

Drill Countersink Hole

END PREP: EPDLED

Tube Light Screw

Tu b e

L ig ht i n g

La m p

Data

23

LED and LAMP DATA

LED or Lamp Spacing

12V DC 0.24W per White, Warm White – 40,000 hrs. series pair Yellow – 100,000 hrs.

2.42 fc

Different LED or lamp spacings can create dramatically varied effects. Tighter spacing is most appropriate for close range viewing applications.

12V DC

0.66 fc

• Lamp spacing: 1" to 6" O.C. depending on product. Any tube profile may be used with any lamp spacing. (3" minimum for FTI/L-05)

142.3 fc

• The first and last light on each tube is placed one half of the specified lamp spacing distance from the end of the tube so when tubes are linked, spacing remains uniform throughout.

Design Voltage* Wattage

LAMP SMD LED

T-1¾ 360° LED

0.24W

FCD at 6"

lamp life†

White, Warm White, Blue, Green – 40,000 hrs.

Yellow – 100,000 hrs.

CREE® XP-E LED

Constant Current

3W

12V DC

0.3W

Quad Chip LED

All Whites – 50,000 hrs.

• Each spacing is individually rated for energy consumption by linear foot. All ratings include a 20 percent safety factor.

Warm White, Neutral White, Cool White – 50,000 hrs.

Cool White 313.5 fc

LED or Lamp Spacing Effects

Neutral White 232.7fc Warm White 182.5fc Ultra Bright Triple Chip

12V DC

0.36W

White – 35,000 hrs.

Neutral White, Warm White – 40,000 hrs.

Blue – 50,000 hrs.

Yellow – 100,000 hrs.

28.5 fc

Piranha SuperFlux

12V DC

0.36W

White, Neutral White, Warm White – 25,000 hrs.

Blue – 40,000 hrs.

Yellow – 80,000 hrs.

4.75 fc

1"

Maximum Sparkle at Close Range • High intensity • Works well in high ambient light areas • Forms continuous tubes of light 2"

Maximum Sparkle at Close Range • High intensity, maximum sparkle and adds dimension • Works well in high ambient light areas • Forms continuous tubes of light

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Max. Lamps/LEDs per Feed Fixture Fastube

3"

System

End Preps

Voltage

Max. Lamps per Feed

Static

N/A

24V

80

360° LEDs

Static

N/A

12V

200

Illumiline

Static

Wire Leads

12V

150

Tivalume

Static

Connectors

12V

144

High Intensity for Close Viewing • Excellent choice for highlighting and delineation when viewed from at least 10 feet • Cost effective at short to medium range distances 4"

Highlight for Mid-Range Viewing • Used for highlighting subjects at viewing distances from 10 to 20 feet • From an angled perspective, the lights appear closer together than they really are • Preferred when the project requires greater lengths of tubing

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Maximum Fixture Run Length (Lmax) Determine maximum fixture run length with the following formula: Lmax = F x P x S ∕ W

6"

F:

Factor for safety (0.8 ~ 0.9)

P:

Transformer- or breaker-rated power

S:

LED or lamp spacing

Economical Brightness for Mid-to-Long Range • Designed for outlining subjects viewed at 25 feet or more • Highlights pinpoints of lights • Often used in floor and ceiling installations

W: LED or lamp wattage

Typical Transformer Dimmer Configuration Magnetic Dimmer (Stepped dimming control)

DIMMER 120VAC Input

+

12VDC OUTPUT TRANSFORMER

+ Load

DC Digital Dimmer (Full range control)

Input

DIMMER From Trnasformer

+

OT DIM control interface (Full range control) N L

Power Supply

+ 10-24VDC

OT DIM

+ Load

Control Signal 1-10VDC

+ 1-10VDC <0.6mA

+

+

LED Modules

LED Modules

24

Sp eci a lty

l i ght ing

Left: Custom Starlight Panel Application Color: Warm White Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography Far Left: Custom Starlight Panel Application Color: Warm White Las Vegas, NV Lighting Design: Ron Harwood Rick Fowler Photography

speci a l t y lig h t ing Tivoli Specialty Lighting Comparison Product

Light Source

System

applications

Colorwash

360 5mm LED cluster

120V

RGB landscape, wall wash and architectural free-standing illumination for outdoor applications.

Beacon Outdoor Wall Light

SMD LEDs

12V DC

Outdoor guide lighting for architectural and venue applications.

Starlight Panels LED

5mm LEDs

12V DC

Multi-LED panel lighting for ceiling walls, panel backlighting and special applications.

25

26

sp ecia lt y

l i g h t i n g

Colorwash is an RGB LED

wall washer in a free-standing, aluminum housing. Adjusting the angle or position of the Colorwash unit allows for ideal illumination of uneven or angular wall configurations.

Energy-saving 12V DC LED light sources project 65 feet at a 50° beam angle. Static and moving lighting effects can be synchronized using a DMX controller. Easy to install and operate, Colorwash easily connects with power and signal cables.

Right: Colorwash Color: RGB 3rd Street Promanade Santa Monica, CA Design: Frances Krae Henri Khodaverdi Photography

colorw a s h Features

• Line-voltage 120V AC, free standing aimable fixture • Completely sealed, waterproof, indoor/outdoor aluminum alloy housing, painted black (IP65) • Weather resistant with an operating temperature range of -4°104°F • Low maintenance and long life: 40,000-hour LEDs • Controller lighting effects: Flashing Color Change, Multi-color Change, Cross Fade, Chase • 50° LED beam spread, 65-foot light projection distance

LIGHTING SYSTEM • RGB technology uses Red, Green and Blue HB LEDs: 360 LEDs per unit (120 Red, 120 Blue, 120 Green) • YWB (Yellow, White, Blue) technology to create specific white color temperature control • Adjustable angled lighting ideal for uneven, angular wall configurations • DMX controller required; compatible with users own program 155/88"

• Static colors: Red, Yellow, Green, Blue, White, Purple, Pink

12 /88" 55

• 25W per unit • Indoor or Outdoor applications

5 33/88" 8 33/44"

Listings

• IP65 Rated, UL/CUL wet and dry listed 5 33/88" 5 33/44"

Sp eci a lty

l i ght ing

beacon outdoor wall light provides a non-intrusive,

glare-free illumination. Available in wall or pole mount for indoor or outdoor guide lighting applications.

Left: Beacon Outdoor Color: Warm White Cricket Wireless Ampitheatre San Diego, CA Dan Snipes Photography

B E A C O N O U T D O O R w a ll lig h t Fixture

• Non-intrusive, glare-free illumination with improved (50% Brighter) illumination • Compact, spherical, polycarbonate fixture is geometrically neutral design – no “knee hazard” • Dome is permanently sealed to mounting base for secure weather and vandal-proof installation • Optional row indicator with improved wider view window (150% larger than original) with edge lit illumination and etched alphanumeric display

Lighting System

• Yellow, White or Warm White LEDs, 9 per fixture standard Surface – Maintenance-free

17/32"

21/4"

– 12V DC Class II power supply required • LED colors: Yellow, White and Warm White standard, Red and Blue available, consult factory

33/16"

Surface

• Indoor or outdoor applications

21/4"

safety

• Meets ADA requirements

13/32"

Surface

17/32"

17/32"

21/4"

• ETL Wet/Dry listed for indoor or outdoor Class II applications

13/32"

33/16"

• Meets NFPA (National Fire Protection Agency) guidelines for aisle/step marking

13/32"

33/16" Bracket for Pole Mounting 1.5" Dia.

Rear 21/4"

17/16"

113/32"

19/32"

27

28

spec ia lt y

li g ht i n g

Starlight panels LED panel effects can be varied with random or custom patterns using static or chase systems.

Panels are black, white or custom colored acoustic with easy drop-in ceiling installation for T-bar ceiling applications.

Panels can be customized cut-outs for downlights and sprinklers and panel backlighting.

Right: Starlight Panel Color: White LEDs Beverly Hills, CA Lighting Design: Mark Raissen Henri Khodaverdi Photography

s t a rlig h t p a nels led Features

• Standard panel sizes are 2' x 2' (actual 23¾" x 23¾") and 2' x 4' (actual 23¾" x 47¾"), with custom sizes and shapes available • Panel Materials: – Acoustic: Class A mineral board; 5/8" (16mm) thick; in Black, White or custom colors • Plenum-rated, metal-back panel option available • Easy drop-in T-bar installation for ceiling applications • Openings for downlights and sprinklers custom cut at factory • Random or custom star patterns available; pattern will determine lamp quantity – 3 or 6 lamps or LEDs per square foot.

• 2.88W, 5.76W, and 11.52W 12V DC panel options 0.24W LEDs in White and Warm White, parallel wired 40,000 hr lamp life • Twinkling effect requires Chase Panels with 4-circuit wiring and chase controller • 12VDC Class II power supply required • Coast Guard approved for use in marine vessels • ETL Listed for Class II applications

Pa n e l

L i g ht i n g

2'x2' Panel s p eci fi ca ti ons

T ec hni c a l

a nd

23 ¾"

Data

23 ¾"

starlight panels lighting Specifications

Panel lighting Specifications • 2' x 2' (actual 23¾" x 23¾") and 2' x 4' (actual 23¾" x 47¾").

2'x4' Panel

2'x2' Panel

47¾"

23 ¾"

• Materials: – Acoustic: Class A mineral board; 5/8" (16mm) thick; in Black, White or Custom Colors

23 ¾"

23 ¾"

• UL Flammability Rating: incombustible SPA-397 board 2'x4' Panel

• Transformer: – Primary: Class II 120V, 240V or 277V

47¾"

LED and LAMP DATA

– Secondary: 12V DC (LED)

23 ¾"

• Power feed: – Each panel provided with wire lead up to 25' long for direct connection to transformer

LAMP 5mm LED 0.24W

Panel Size 2'x2'

2'x4'

Typical Application Wire Lead

Power Feed Point

Lamps per Lamps Wattage Design Sq. Ft. per panel per panel Voltage* lamp life† 3 12 2.88W 12V DC White, Warm White 40,000 hrs.

6

24

5.76W

3

24

5.76W

6

48

11.52W

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

6'

T 2' x 4' Starlight Panel

colorwash lighting Specifications

2' Transformer 4'

155/88"

12 55/88"

12'

5 33/88" 8 33/44"

5 33/88" 5 33/44"

Leaf Spring (4 per panel)

LED and LAMP DATA

Hole for Removal Tool

LAMP

Mounting Information

5mm LED

• Easy drop-in T-bar installation for ceiling applications

Design Voltage* Wattage

lamp life†

120V AC 25W per fixture

RGB, YWB, YEL, WHT, BLU - 40,000 hrs.

• Specify cut-outs for sprinklers and downlights

Starlight Panel

Standard T-bar Ceiling Structure

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Candela Distribution Acoustic and Polycarbonate Starlight Panel

1646

1235

823

Standard T-bar Ceiling Structure

2 412

Power Harness with Connectors VIEW FROM ABOVE

2. INSTALLED POSITION

1

FCD at 10' 10.4 fc

29

30

Stra nd

l i ght ing

Strand Lighting is a multipurpose product offering unparalleled flexibility for architectural and environmental lighting applications as well as dramatic brilliance to landscapes. Varied mounting options provide the impact required for architectural delineation.

Left: Architectural Channel Wynn Hotel & Casino Macau, China First Circle Design

S t r a nd L ig h t I N G Tivoli Strand Lighting Comparison Product

Light Source

System

applications

Twilights LED

0.24W LEDs T-1¼ and T-3¼ 0.48W T-3¼ Piranha Triple Chip (Warm White only)

12V DC

Landscape points of light for trees, streets and parks indoor or outdoor.

Litesphere LED

0.24W LEDs T-1¼ and T-3¼ 0.48W T-3¼ Piranha Triple Chip (Warm White only)

12V DC

Higher output architectural edge lighting, canopy lighting indoor or outdoor.

Litesphere Xenon

3W or 5W Xenon lamps

24V AC

Retro-illumination for historical applications of architectural edge lighting, canopy lighting indoor or outdoor.

Tivotape LED Static Indoor

0.90W/ft. SMD LED: Red or Yellow

12V DC

Multi-purpose, small profile, discreet and field cuttable illumination.

High output offers two times light output of standard Tivotape.

1.30W/ft. SMD LED: Green, Blue or Whites Tivotape High Output LED Static Indoor

2.60W/ft. SMD LED: Cool/Neutral/Warm White

24V DC

Tivotape LED Static Outdoor

1.05W/ft. SMD LED: Green or Blue

12V DC

1.08W/ft. SMD LED: Red or Yellow 1.15W/ft. SMD LED: Cool/Neutral/Warm White

Tivotape RGB Indoor

2.30W/ft. SMD RGB LED

12V DC

Tivotape RGB Outdoor

3.12W/ft.SMD RGB LED

12V DC

Architectural Channel

Medium/Candelabra base, Litesphere base or MR16 GU5.3 Bi Pin base lamps

Tivolites

Subminiature incandescent lamps

TivoLED

Rigid channel for strand lighting or lamps for use in marquee, portecoche or wall grazing applications indoor or outdoor.

120V

Frosted 5mm LEDs

24V

PAR and Decorative: T1¾ LED

120V

®

MR16: Cree

DMX controllable multi-purpose, small profile, discreet and field cuttable illumination.

12V DC

Low maintenance, shatter resistant lamps available in LED or incandescent for food service or any indoor or outdoor applications.

Multi-LED lamps available in Standard, Par and MR-16 bases for indoor or outdoor.

31

32

Str a n d

l i g h t i n g

TWilights™ LED emit sharper, purer color than miniature bulbs, for unique effects in landscape and architectural applications.

These commercial-grade,LED light strings, perfect for yearround indoor and outdoor use, provide long life, energy savings, and the safety of low voltage.

Twilights LED can create an unexpected and memorable element to any architectural facade or landscape application.

Right: Twilights LED Hotel Anaheim, CA

T W I L I G HT S ™ L E D lens cap

⁄8"

5

1 1⁄16" assembled

24V 1W lamp 2-wire 18-gauge stranded

⁄8"

7

Features Series 1

• 6" or 12" O.C. LED spacing • Clear lens caps included (assembled at factory) • Optional colored lens caps available (consult factory) • Class II DC power supply required, see specifications

T1¾ HB LED

⁄2"

1

Lens Cap

3 ⁄4"

12V DC LED

1 3 ⁄16"

assembled

2-wire 18-gauge stranded

7⁄8"

• Clear sockets on a clear 2-wire 18-gauge conductor • Great for landscape illumination of trees or bushes • Replaceable, low-heat 0.24W, 12V DC LEDs in white (5500°k +/-500°k) and warm white (2800°k +/-300°k), Yellow and Blue

T-3¼ wedge based LED

• Clear sockets on a clear 2-wire 16-gauge conductor • Larger format is perfect for buildings and large trees • Replaceable, low-heat 0.24W, 12V DC LEDs in Red, Orange, Yellow, Green, Blue and White

T1¾ HB LED

• 0.48W 12V DC wedge-base Piranha Triple chip LED lamps, available in Warm White

⁄8 "

5

T3¼ Wedge Base LED

¾" 1 3⁄16" assembled ⁄8"

7

lens cap 0.24W wedge-base LED 2-wire 16-gauge stranded

Listings

• UL Wet listed for indoor or outdoor Class II applications

Stra nd

l i g ht ing

33

Litesphere™ is energyefficient, LED or Xenon strand lighting for surface-mounted or suspended applications.

Litesphere light sources are protected by weather sealed clear or colored polycarbonate globes.

Left: Litesphere LED KC Royals Stadium Kansas City, MO Populous Architects Chris Vleisides- VPS Photography

L i t esp h ere ™ led / X enon Features

• Socket is parallel wired and permanently fixed to cable • Flexible 16ga. cord in black or white with matching socket • 0.24W 12V DC wedge-base LED lamps, available in Red, Orange, Yellow, Green, Blue and White • 0.48W 12V DC wedge-base Piranha Triple chip LED lamps, available in Warm White • 3W, 5W 24V AC wedge-base xenon lamps, clear or frosted • 6", 12", 18", 24" O.C. or custom lamp spacing available

Available in Architectural Channel, See Page 36

• Average LED lamp life: 40,000 hours • Average xenon lamp life: 20,000 hours • Shatterproof polycarbonate globes are available in clear, yellow, red, orange, opaque, green, blue and purple • Weather sealing available (required for outdoor applications) • 12V DC system, Class I power supply required (LED) • 24V AC system, Class I power supply required (Xenon)

Applications

• Product may not be suitable for high salt air environments consult factory

13/8"

diameter

• Upright socket mounting requires Architectural Channel See Specification sheet for details

Listings

• UL listed for indoor or outdoor Class I applications

2 11⁄16"

3 1/4" 21/8"

diameter

34

St r a n d

l i g ht i n g

Tivotape™ LED is a perfect

solution for cove, undercounter/cabinet lighting accents.

Includes installation ready 3M tape adhesive for simplified installation. Optional clear and frosted tube and channel for architectural effects. Tivotape™ LED is a multi-purpose small profile discreet and field cuttable illumination. Tivotape™ high output has two times the standard Tivotape light output.

Right: Tivotape RGB Hollywoodland Retail Outlet Hollywood, CA Design: Visual Terrain Henri Khodaverdi Photography

t ivo t a pe ™ L ed s t a t ic S eries Features (standard & High Power)

• Flexible flat conductor strip allows for a wide range of installation possibilities • Manufactured in 1 foot (115/8") sections 11/16" O.C. • Standard Tivotape Energy efficient SMD LEDs with 50,000 hour life 0.90W/ft: Indoor Red, Yellow 1.30W/ft: Indoor Green and Whites Tivotape High Output High power SMD LEDs with 30,000 hour life 2.60W/ft: Indoor High Power 2X light output of standard Tivotape Up to 120 Lumens/ft 3/16"

Listings

1/4"

• UL listed File

Indoor

1/4" 7/16"

• 12V DC Class II power supply required (Indoor High Power: 24V)

• ROHS Compliant 3/16" 1/8"

tivotape outdoor

• Manufactured in preset waterproof lengths of: 1', 2', 4', 8', 12' and 16' with waterproof Male connector/Dead end orientation - optional waterproof Male/Female connector orientation available • Energy efficient 12V DC 3 LED series with 50,000 hour life

1/8" 7/16" Outdoor

1.08W/ft: Outdoor Red or Yellow 1.05W/ft: Outdoor Green or Blue 1.15W/ft: Outdoor Whites • Great for outdoor niche, recessed or borderline lighting

Stra nd

l i g ht ing

Tivotape™ RGB Multi purpose

small profile discreet, field cuttable DMX controllable RGB illumination for dramatic color changing effects.

t ivo t a pe ™ R G B S eries Features (indoor & outdoor)

• Flexible flat conductor strip allows for wide range of installation possibilities • Indoor Tivotape RGB manufactured in (115/8") segments Outdoor Tivotape RGB manufactured in 1.6 foot segments 11/16" O.C. for even illumination • Energy efficient 12V DC RGB LEDs with 15,000 hour life 2.3W/ft: Indoor Tivotape RGB 1.95W/ft: Outdoor Tivotape RGB • 12V DC Class II DC power supply required

Listings • UL listed

• ROHS Compliant

3/16" 1/4" Indoor

Tivotape products are flexible and feature self adhesive 3M tape for easy installation

1/4" 7/16"

3/16" 1/8"

1/8" 7/16" Outdoor

35

36

St r a n d

l i g ht i n g

Architectural Channel

is a lightweight, aluminum alloy channel for Tivoli's Litesphere™ low-voltage xenon or LED bulbs and medium-base bulbs like Tivoli’s Tivolite and Tivoled.

This channel is ideal for use in amusement parks, casinos, bridges, boats or street decoration as it is UL listed for wet locations.

Right: Architectural Channel Encore Hotel & Casino Las Vegas, NV Rick Fowler Photography

Arc h i t ec t ur a l C h a nnel Features

• Lightweight aluminum alloy extrusion • 2" x 2" standard profile extrusion Low Profile: 1½" x 1" for available for Candelabra base only • Mitred corners and radius curves as small as 24" available • Available in four standard finishes: Polished Aluminum, Satin Aluminum, Powdercoated White or Powdercoated Black; custom paint or anodizing available, consult factory • 6", 12", 18" and 24" O.C. standard • Aluminum channel available in 12' lengths maximum ML Series in standard channel

Litesphere base in standard channel

• Stationary or directional sockets available (MR Series only)

Listings

• UL listed for wet location

Porcelan Socket

5" x 7" Blade Baffle Candelabra base in low profile channel

Medium base with wire guard option

Wall Slot Installation

Stra nd

l i g ht ing

Backstage Architectural Channel with lamp-protecting wire guards (Medium base only) is a practical choice for makeup mirrors in theaters and school auditoriums.

Wire guards are available in standard nickel finish or can be powder-coated to match any Architectural Channel painted finish.

Left: Architectural Channel The Wynn Hotel & Casino Macau, China First Circle Design

½˝ ½˝

½˝

3 3

1"

/16 "

1

/2 "

/2 "

1

1

/2 "

1

/2 "

/2 "

1

/2 "

3 ½"

1"

1"

1

1

1½˝

1½˝ 1½˝ 2 /8 "

2 /8 " 2 1 /8 " 2 1/8 "

Low Profile Channel Candelabra Base Socket

2 1 /8 "

2 1/8 " 2 1/8 "

2 1 /8 " 2 1 /8 "

Medium Base Socket

2 1/8 "

1 2 /8 "

2 1/8 " 2 1/8 "

1 2 /8 " 2 1 /8 "

1 2 /8 "

Candelabra Base Socket

1 2 /8 " 2 1 /8 "

5 ¾"

/2 "

40°

LAMPSLAMPS OUTSIDE BEND BEND OUTSIDE LAMPS OUTSIDE BEND

RIGHT -SIDE BEND

2 /8 " /2"

RADIUS RADIUS SPECIFY 1RADIUS /2"

LEFT-SIDE BEND

1

(26" MIN. MAX.) (26"8’MIN. 8’ MAX.) (26" MIN. 8’SPECIFY MAX.)SPECIFY LEFT-SIDE BEND

1

LEFT-SIDE BEND

RIGHT -SIDE BEND

2 1/8 "

RIGHT -SIDE BEND

1

1

/16 " 3 /16 "

LAMPSLAMPS INSIDEINSIDE BEND BEND LAMPS 1 INSIDE BEND

1

/2 " 2 1/8 "

2 /8 "

1¼"

* * 4" O.C. 4" SPACING O.C. SPACING 4" O.C. SPACING*

6" O.C. 6" SPACING O.C. SPACING 6" O.C. SPACING

3 9/16"

3 ½"

12" O.C. 12" SPACING O.C. SPACING 12" O.C. SPACING 18" O.C. 18" SPACING O.C. SPACING 18" O.C. SPACING

2 1/8"

2 1/8"

2 1/8"

24" O.C. 24" SPACING O.C. SPACING 1

22 1//88""

Medium Profile Channel Litesphere Base Socket

1 2 /8 "

Standard Profile Litesphere Base Socket

O.C. SPACING * 4”24" spacing for candelabra base only * 4” spacing for 1candelabra base only 8 * 4” spacing for candelabra base only

2 /"

Stationary MR Base Socket

2 1/8"

Directional MR Base Socket

2 1/8"

Wire Guard Medium Base Socket

37

38

Str a n d

l i g h t i n g

Tivolite™ Bulbs are multi-

filament incandescent or LED lamps in medium or candelabra base, available in standard or Brites® option. They create sparkling decorative effects and are a money saving, energy conserving, long-life alternative for architectural applications.

Right: Tivolite Bulbs Pacific Theaters Glendale, CA Perkowitz + Ruth Architects Greg Epstein Photography

Tivo L I t e ™ Bul b s Features

• Tivolite bulbs contain five sub-miniature lamps wired in series and enclosed in a standard size glass envelope • Low maintenance – lamps have up to 25,000-hour rated life • Tivolite® Brites are five times brighter than standard Tivolite bulbs. (Manufactured for G16, 19 and G25 only) • Weather-resistant O-ring option available for outdoor, damp and humid locations – makes Tivolite bulbs resistant to moisture, ultraviolet light, smog and withstand extreme temperatures from -40° to 250°F - Not intended for use in unsecured cable with inverted hanging socket applications in direct exposure to weather conditions. ie: Wind, rain, snow, etc.

tivolite led bulbs

Tivolite Bulb Sizes and Styles

3¹/8"

3¹/8"

• Tivolite LED bulbs contain 10 LEDs (G16) or 15 LEDs (G25) wired in series and enclosed in a standard size glass envelope 3 LED colors available: Cool White (5000°K), Pure White (3000°K) and Warm White (1900°K)

2³/8" 2"

2"

2"

• Low maintenance – LEDs have up to 50,000-hour rated life

Listing

• UL Listed G16 Medium Tivolites LED

G25 Medium Tivolites LED

G25 Medium

G19 Medium

G16 Medium

G16-C Candelabra (2.5W only)

Stra nd

l i g ht ing

TivoLED® decorative multi-LED

bulbs are energy-efficient LED illumination sources designed to replace standard filament incandescent lamps in interior and exterior applications.

Decorative, PAR and ML Series in durable frames for a

variety of uses.

TivoLED LED lamps Cupertino Mall Cupertino, CA Kim Bailey. Starlight Effects

Tivo L E D ® B U L B S decorative Features

Decorative Series - medium base

• Long-life LEDS – up to 50,000 hours • Decorative Series LED colors: White, Warm White, Blue, Green, Red, Orange, Yellow • ETL Listed Medium Base 12 LED Standard Bulb

Medium Base 30 LED Large Globe

Medium Base 16 LED Sign Bulb

par Features • Long-life LEDS – up to 50,000 hours

ML Series - mr16 gu5.3 bi pin

• PAR Series LED Colors: Warm White (2700°K to 3200°K), White (5000K to 9000K) • PAR Series available in 30° spot or 90° flood • ETL Listed

ML Series Features • Long-life LEDS – up to 35,000 hours • Warm White 2800°K, Cool White 6000°K available

GU5.3 Bi Pin Base 4 LED ML Series

GU5.3 Bi Pin Base 4 LED MLR Series

par Series - medium base

• ML Series available in 25° and 30° beam spread • MLR Series available in 4°, 10°, 16°, 25°, 50°, 80°, 2x70° and 10x60° beam spreads • UL Listed PAR 20 30/42 LED

PAR 30 60 LED

PAR 38 120/150 LED

39

40

St r a n d

Li g h t i n g

L am p

Data

Mounting CLips

LED and LAMP DATA Fixture LAMP Tivotape LED SMD LED Static Indoor

Design Voltage* Wattage lamp life† 12V DC 0.90W/ft: Red or 50,000 hours Yellow

Fixture

Mounting Accessories

Features

Tivotape LED Self-Adhesive

Infinity Mounting Clannel

1.30W/ft: Green, Blue, Cool/ Neutral/Warm White 24V DC 2.60W/ft 30,000 hours

Tivotape LED High Power Static Indoor

Architectural Tubing

Tivotape LED Static Outdoor

Mounting Channel

• Color: Clear • Mounting channel available in clear or frosted

• Architectural Tubing available in clear or frosted

12V DC 1.08W/ft: Red or 50,000 hours Yellow 1.05W/ft: Green or Blue

Tivotape RGB LED

Litesphere Xenon

RGB LED

1.15W/ft: Cool/ Neutral/Warm White 12V DC 2.30W/ft: Indoor 15,000 hours

Litesphere PVC Suspension Clips Xenon & LED

• Color: White • Clips fit over 1 /8" wire and snaps into top of socket

Twilights LED

• Color: Clear • One screw through each side of clip

3.12W/ft: Outdoor

Xenon Wedge Base Frosted Clear

24V AC

3W 5W

Polycarbonate Mounting Clip T1-3/4 LED Wedge Base

20,000 hours

1 1/4"

Litesphere LED

T-3¼ WedgeBase LED

12V DC

0.24W

1 5/8"

3/4"

1 7/8"

White, Blue, Green – 40,000 hours Red, Yellow – 100,000 hours

Twilights LED

Piranha Triple Chip Wedge Base LED

12V DC

T-1¼ LED

12V DC

0.48W

Warm White, – 40,000 hours

Lens Caps Lens CAps

Twilights LED

7/16"

3/8" 9/16"

0.24W

Warm White, White, Blue – 40,000 hours Yellow – 100,000 hours 1½"

T-3¼ WedgeBase LED

12V DC

0.24W

White, Blue, Green – 40,000 hours Red, Yellow – 100,000 hours

Piranha Triple Chip Wedge Base LED

12V DC

0.48W

Warm White, – 40,000 hours

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

⁄4"

3

⁄4"

3

Features

Fixture

Polycarbonate Lens Caps • Colors: Red, Amber, Opaque White, Blue, Green, Clear

• Twilights LED

Polycarbonate Lens Caps • Colors: Red, Amber, Opaque White, Blue, Green, Clear

• Twilights LED Wedge base 1½"

Polycarbonate Globes • Litesphere • Colors: Red, Yellow, Orange, 11 2 ⁄16" Opaque White, Blue, Green, Clear, Frosted

⁄4"

3

Stra nd

Li g hti ng

Incandescent LAmp Spacing

24"

Fixture

Lamp Wattage

Lamp Spacing

Max. Lamps per Feed

Max. Lamps per 12 Amps

Litesphere Xenon

3W

24"

64/128'

96/192'

18"

64/96'

96/144'

12"

64/64'

96/96'

6"

64/32'

96/48'

24"

38/76'

96/112'

18"

38/57'

96//84'

12"

38/38'

96/56'

6"

38/19'

96/28'

12"

5W

6" * Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Different LED or lamp spacings can create dramatically varied effects. Tighter spacing is most appropriate for close range viewing applications. Perspective also alters the effect of different spacings.

• The first and last light on each strand is placed one half of the specified lamp spacing distance from the end of the strand so when strands are linked, spacing remains uniform throughout.

Lamp Coverage for Twilights Series 1 Strands

LED Spacing Max. LEDs per Feed

Max. Length

25' x 25'

12"

50/50'

220/220'

20' x 20'

6"

100/50'

220/110'

24"

25/50'

1720/1440'

18"

36/50'

720/1080'

2"12"

12"

50/50'

720/720'

6"

6"

100/50'

720/360'

24"

25/50'

375/750'

12"

Fixture

LED Color

LED LED Wattage SPACING

Twilights LED 12V 5A

Yellow, White, Warm White, Blue

0.24W

Litesphere LED

White, Blue, Green, Red, Yellow

0.24W

15' x 15'

6" 4"

Data

LED or Lamp Spacing

24V 12A Transformer

18"

La mp

24"

12V 15A Transformer

3" 18"

approx. branch area

Warm White

0.48W

18"

36/50'

375/563'

12"

50/50'

375/375'

6"

100/50'

375/188'

15' x 15'

20' x 20'

25' x 25'

No. of strings / No. of lamps

coverage Sparse

3 / 120

5 / 200

8 / 320

Medium

6 / 240

10 / 400

16 / 640

Full

9 / 360

15 / 600

24 / 960

Total

12 / 480

20 / 80

32 / 1280

This chart represents recommended coverages.

Individual tastes may vary.

Maximum Fixture Run Length (Lmax) Determine maximum fixture run length with the following formula:

* Lamps operate at 80% of design voltage. † Readings at 80% of design voltage.

Lmax = F x P x S ∕ W

F:

Factor for safety (0.8 ~ 0.9)

P:

Transformer- or breaker-rated power

S:

LED or lamp spacing

W: LED or lamp wattage

Typical Transformer Dimmer Configuration Magnetic Dimmer (Stepped dimming control)

DIMMER 120VAC Input

+

12VDC OUTPUT TRANSFORMER

+ Load

DC Digital Dimmer (Full range control)

Input

DIMMER From Trnasformer

+

OT DIM control interface (Full range control) N L

Power Supply

+ 10-24VDC

OT DIM

+ Load

Control Signal 1-10VDC

+ 1-10VDC <0.6mA

+

+

LED Modules

LED Modules

41

St r a n d

L ½˝ am p

Li g h t i n g

Data

3

1

/16 "

/2"

1" LED and LAMP DATA PRODUCT Tivolite Bulbs Tivolite Brites

Tivolite Bulbs

1

Design LAMP Voltage* Wattage Incandescent Medium Base 120V 5W

lamp life† 25,000 hrs

12.5W

Lumen 1½˝ Output 7.5

10,000 hrs

2 Product /8 "

Features

architectural Channel

2 3/16"

57

3 1 2 /8 " 2 /16"

Incandescent Candelabra Base

Tivolite Medium Base - G16 LED Bulbs

24V

2.5W

40,000 hrs

10

120V

1W

50,000 hrs

15 Warm White

2 1/8 "

Lamps

Aluminum alloy extruded • Litesphere channel • Tivolites • Finishes: • TivoLED Polished Gold, Polished (medium Aluminum, Satin Gold, base) Satin Aluminum, custom paint or anodizing • Two-, three- or four-sided channel configuration available; for use with Litesphere only (see diagram at left)

1 2 /8 "

radius configurations LAMPS OUTSIDE BEND

20 Pure White Candelabra Base - G16

24V AC 120V

30 Pure White Candelabra Base - G25

45 Cool White

24V AC

(26" MIN. 8’ MAX.)

SPECIFY RADIUS

LEFT-SIDE BEND

Medium Base - G25

25 Cool White 20 Warm White

RIGHT -SIDE BEND

42

4" O.C. SPACING

6" O.C. SPACING

12" O.C. SPACING

LAMPS INSIDE BEND Consult factory for radius options

18" O.C. SPACING

24" O.C. SPACING PRODUCT 3 ⁄16" Decorative Series 2TivoLED

Design Voltage* # of LEDs

Max. Wattage

Lumen Output

Incand equiv

3½"

Standard Bulb

120 VAC

12

1.4W

38

10W

Large Globe

120 VAC

30

1.4W

56

25W

Min. 6" O.C.

5¾"

23⁄16"

Sign Bulb

Min. 4"

120 VAC

16

1.4W

42

15W

MLR Series

12V AC/DC

4

4.0W

65/85

15W

ML Series

12V AC/DC

4

TivoLED ML Series

3.5/5.0W 180/200 30W/35W Architectural Channel Medium Base with Wire Guard option

TivoLED PAR Series PAR 20

120 VAC

30

2W

56

15W

42

3W

75

25W

PAR 30

120 VAC

60

6W

119

40W

PAR 38

120 VAC

120

8W

223

55W

150

12W

280

70W

* 4” spacing for candelabra base onl

43

TivoFlex Color: Blue Jamieson Place Building Calgary, Canada Gibbs Gage Architects John Bilodeau Photography

44

Covelum LED Color: Warm White Canyon Restaurant Anaheim Hills, CA Robinson Hill Architecture Henry Khodaverdi Photography

Platinum Cove Color: Warm White Natural History Museum Los Angeles, CA First Circle Design Anthony Masters Photography

TIVOLI, LLC 15602 Mosher Ave Tustin, CA 92780

NEW ADDRESS!

ph 714 957-6101 fx 714 427-3458 e sales@tivolilighting.com www.tivolilighting.com

Copyright Š 2010 Tivoli, LLC 10.10