Titus System 1 EN

System 1 Fittings for Rigid Assembly Systems

System Features Double locking carcase screw

1.9

· Zinc diecast for precision · Titus Double locking carcase screw makes an almost invisible connection · Collar under the head to pull panels together · 2nd ‘lower’ thread pulls against a ‘faster’ thread to provide maximum connection force and prevents overdriving of fastener · Almost invisible in position · Head can be ‘fastcapped’ or filled

System 1 Fittings for Rigid Assembly Systems Double Locking Carcase Screw

Technical and mounting details

Item number

Screw 6x42

Zinc

Cabinet Connectors

· High performance from widely spaced primary thread · Finer secondary thread provides additional holding power and positive stop (no override) · Increased support for vertical panel is gained from the funnel head with collar at its base · One-piece fitting

885

00180 >

42

DRILL HOLE Ř7.0/8.0 TO SUIT BOARD MATERIAL MIN DEPTH. 30.00

1. DRILLING DETAILS Ø5

RILLŘ7.0/8.0 HOLE Ř7.0/8.0 OLE T BOARD MATERIAL RD MATERIAL

Ř5.00

min 30 Ø7/7.5

15.00

15/16

2. INSERT SCREW TO SHOULDER IN FACE BOARD.

Ř5.00

DETAILS GRILLING DETAILS

Ř5.00

MIN DEPTH. MIN DEPTH. 30.00 30.00

15.00 15.00

15.00

2. INSERT TO SHOULDER 2. INSERT SCREWSCREW TO SHOULDER FACE BOARD. IN FACEINBOARD.

1.2. INSERT InsertSCREW screw shoulder in TOto SHOULDER INface FACE board BOARD.

2. S crew into INTO Ø5mm 3. SCREW Ř5mmhole HOLE. 4. BOARD JOINT PULLED UP

BY COLLAR ON SCREW.

5

SPECIAL SCREW 'APPLICATION DRAWING'

CREW INTO Ř5mm NTO Ř5mm HOLE. HOLE.

B4.oard joint pulled BOARD JOINT PULLED UP by 4.3.

BOARD JOINT PULLED UP up

BY COLLAR ON SCREW.

BY COLLAR ON collar onSCREW. screw

4. 5.

B oard locked inPLACE place by 5. BOARD LOCKED IN PLACE BOARD LOCKED IN

BY SCREW.

BY SCREW. screw

IAL SCREW 'APPLICATION DRAWING' REW 'APPLICATION DRAWING'

1000 Pcs

Made of zinc

4. BOARD JOINT PULLED UP

BY COLLAR ON SCREW.

5. BOARD LOCKED IN PLACE

BY SCREW.

AWING'

1.10