Titus Furniture Fittings Systems 2018 by Titus Group

Titus Group Technical Catalogue and Manual

Furniture Fittings Systems

2018

Important Information

Technical information While every effort has been made in the production of this catalogue to ensure the accuracy of information, our products are continually being revised and users should confirm the up to date specification before ordering. Due to constant improvement of products presented in the catalogue, we can make changes at any time and without notice. Responsibility It is the responsibility of the user to ensure the fitness of hardware for the intended purpose. We recommend assessment by appropriate testing in the application and by technical enquiry to our representatives. Intellectual property Titus Group owns the intellectual property rights in its products worldwide whether as trademarks, patents, intellectual, copyright, designs, illustrations, drawings and the â€˜know howâ€™ contained in their design and production. Titus Group respects the equivalent rights in competitors and all other relevant product design rights. To our knowledge our products do not infringe any intellectual property rights of competitors or other parties. Titus Group takes infringements of its rights seriously and will rigorously defend these rights to the full extent of the law. *Non preferred articles All Item numbers in the catalogue marked with * are for non preferred items available on extended delivery times. Trademarks Titus and Titusonic are registered trademarks of Titus International Ltd. Lama is a registered trademark of Titus d.o.o. Dekani, WoodWelding is a registered trademark of WW SA.

0.3

Contents

1 2 3 4 5

Connectors

Soft Closing Systems

Concealed Hinges

- System 1 - System 2 - System 3 - System 4 - System 5 - System 6 - System 7

- Information - Glissando add-on hinge soft closing system - Glissando stand-alone soft closing system - Titusoft for drawers - Titusoft for sliding doors

- Information - T-type Glissando, T-type - S-type-i plus, S-type-i, S-type plus, S-type - B-type-i, B-type - Special hinges - Push latch

1.1 1.7 1.11 1.15 1.17 1.23 1.47 1.59

2.1 2.3 2.15 2.21 2.23 2.29

3.1 3.3 3.29 3.71 3.119 3.163 3.167

Other Functional Fittings

4.1

The Titus Group Profile

5.1

Connectors

Connectors Product Guide

Page

System 1 Fittings for rigid assembly systems

a highly cost-efective and rigid assembly system for factory, consumer and home assembly

Fittings for face-boring applications

face boring applications that provide a tolerant efficient assembly

1.11

Fittings for face and edge boring

two component rigid face and edge drilling fastening

1.15

Fittings for face-boring only

a range of low-cost one-piece fittings for high volume home assembly applications

1.17

Cams and dowels

a comprehensive range of cam and dowel connecting fittings for all cabinet applications

1.23

1.7

System 2

System 3

System 4

System 5

1.3

System 6 Quickfit-Expando connectors

face boring expanding connectors for all cabinet applications

1.47

Heavy duty cams and dowels

high quality fittings for offices and public furniture

1.59

System 7

1.4

Connectors

Page

Connectors Information

Why Choose Titus? Titus connectors add value to furniture and to furniture manufacturing

Titus connectors improve the quality of furniture and lower the cost of manufacturing and assembly while ensuring a high degree of customer satisfaction.

The most advanced range of connectors available on the market

Precise and efficient product design. The broadest possible range of drilling tolerances ensures reliable assembly and consistently strong joints. 'Klix' locking feature, the engagement of interlocking teeth on cam and dowel, to prevent joint loosening in service or transit. Expanding function provides degrees of variation in out-of-tolerance drillings ensuring stronger joints and improved quality of furniture. Twinstart thread for faster and more stable insertion. Depth stop collar prevents over-insertion. Firm tightening for greater confidence in use. Cam locks at 230° assuring smooth tightening action and greater dowel pull-up.

Quickfit for hand dowel insertion. Quickfit TL5, new generation steel dowel with quickfit expando technology for insertion in Ø5mm dowel holes. Quickfit TL2, TL4 with the built-in self adjustment feature for higher drilling tolerances. Quickloc one piece fitting for faster assembly with integrated expanding cam and dowel. Zinc+steel dowel for optimal strength and performance. Precise dowel manufacturing high precision of zinc and strength of steel assures 100% dimensional accuracy.

Easy and quick consumer friendly self-assembly of furniture

Self-assembly furniture offers consumers good value and instant availability of products.

Titus connectors provide consumers with easy assembly and furniture producers with increased productivity: · reduced number of assembly parts · e asy assembly instructions · security of packed parts during transit

With the aim of providing consumer with simpler instructions, fewer parts and an easier assembly process, Titus has significantly reduced and simplified the number of fittings traditionally required in furniture production.

1.5

Connectors Information

Easy and Quick Furniture Assembly

CAF formula

CAF=Consumer Assembly Friendliness Titus CAF formula provides a comparative measure for customer satisfaction. By using it manufacturers are able to evaluate their products internally or against those of their competitors.

How does it work?

While offering consumers easier and faster assembly, there are obvious advantages also for furniture manufacturers â€“ buying, counting, bagging and stocking of fittings can be greatly reduced.

Comparative CAF scores to assemble a hand held demonstrator

CAF

Connecting screw (traditional assembly)

4 38 3 126

Cam & dowel with single start thread

6 21 4 108

Cam & dowel with twinstart thread

6 15 4 84

Cam & TL2 dowel (self-assembly)

6 7 4 52

Cam & TL2 dowel (factory pre-inserted)

2 3 2 10

Quickloc

2 3 1 5

Fully assembled demonstrator

1 0 1 1

1.6

Connectors

Easy and Quick Furniture Assembly

System 1 Fittings for Rigid Assembly Systems

System Features Double locking carcase screw

· Zinc diecast for precision · Titus Double locking carcase screw makes an almost invisible connection · Collar under the head to pull panels together

· · ·

Hi-Lo™ carcase construction screw

The Hi-Lo™ carcase construction screw (CCS) offers a strong, tolerant and cost effective connection with minimal panel preparation.

· ‘Hi’ thread gives low bursting component force from the sharp 30 degree angle thread · ‘Lo’ thread at 60 degree angle uses the vertical force component to press fibrous and particle components of panels onto the ‘Hi’ thread and are contained by their greater height · The very small shank on a Hi-Lo™ screw means less material displacement than conventional threads and enables minimum or partial drilling of pilot holes for quicker panel processing

The combination effect of the elements of a Hi-Lo™ screw means · A greater differential between drive torque and strip torque in fibrous and particle materials to ensure a reliable and repeatable fixing · Hi-Lo™ threads provide minimum bursting forces

Barrel nut (plastic)

· Used with Titus Hi-Lo™ screws · Titus barrel nuts provide maximum strip torque for reasonable drive torque · Capable of multiple reconnection repeatability

Cover caps

· Available in multiple colours · All recess and head types offered · High quality engineering polymers used in their construction · Uniformity of holding with good tolerance · Wide range of application and use conditions

1.7

2nd ‘lower’ thread pulls against a ‘faster’ thread to provide maximum connection force and prevents overdriving of fastener Almost invisible in position Head can be ‘fastcapped’ or filled

System 1 Fittings for Rigid Assembly Systems Double Locking Carcase Screw

Technical and mounting details

Zinc

Connectors

· High performance from widely spaced primary thread · Finer secondary thread provides additional holding power and positive stop (no override) · Increased support for vertical panel is gained from the funnel head with collar at its base · One-piece fitting

Item number

Screw 6x42

885

00180 >

DRILL HOLE Ř7.0/8.0 TO SUIT BOARD MATERIAL MIN DEPTH. 30.00

1. DRILLING DETAILS Ø5

RILLŘ7.0/8.0 HOLE Ř7.0/8.0 OLE T BOARD MATERIAL RD MATERIAL

Ř5.00

min 30 Ø7/7.5

15.00

15/16

2. INSERT SCREW TO SHOULDER IN FACE BOARD.

Ř5.00

DETAILS GRILLING DETAILS

Ř5.00

MIN DEPTH. MIN DEPTH. 30.00 30.00

15.00 15.00

15.00

2. INSERT TO SHOULDER 2. INSERT SCREWSCREW TO SHOULDER FACE BOARD. IN FACEINBOARD.

1.2. INSERT InsertSCREW screw shoulder in TOto SHOULDER INface FACE board BOARD.

2. Screw into INTO Ø5mm 3. SCREW Ř5mmhole HOLE. 4. BOARD JOINT PULLED UP BY COLLAR ON SCREW.

SPECIAL SCREW 'APPLICATION DRAWING'

CREW INTO Ř5mm NTO Ř5mm HOLE. HOLE.

B4.oard joint pulled BOARD JOINT PULLED UP by 4.3. BOARD JOINT PULLED UP up BY COLLAR ON SCREW. BY COLLAR ON collar onSCREW. screw

4. 5. B oard locked inPLACE place by 5. BOARD LOCKED IN PLACE BOARD LOCKED IN BY SCREW. BY SCREW. screw

IAL SCREW 'APPLICATION DRAWING' REW 'APPLICATION DRAWING'

1000 Pcs

Made of zinc

4. BOARD JOINT PULLED UP BY COLLAR ON SCREW.

5. BOARD LOCKED IN PLACE BY SCREW.

AWING'

1.8

System 1 Fittings for Rigid Assembly Systems Hi-Lo™ Screw and Barrel Nut

· Hi-Lo™ screws have a twin thread for faster insertion · ‘Hi’ threads and ‘Lo’ threads combine to give excellent pull out in chipboard · Funnel head design means no countersinking · Steel is case hardened for extra strength

Hi-Lo™ screw

POZIDRIV No.2 RECESS S 5-6 0066 6-8 0071 0077 11.5-13 12-14 0172

L 18-19 32-33 44-45.5 53.5-55

Ø7.6 L POZIDRIV No.2 RECESS

4-5

Ø7.9

47-48

9 min

10000 Pcs (00062) 9000 Pcs (00068) 7000 Pcs (00071) 4000 Pcs (00077, 00171, 06074) 3000 Pcs (00172, 06077, 06080)

*00062 >

852

*00068 >

852

00071 >

852

00177 >

852

*00171 >

852

00072 >

852

06074 >

852

White

Phosphate

Black

4 Ø4

Item number

Ø5

Ø3

Drive type

Technical and mounting details

Total length

1056

Screw diameter

Ø5

*06077 >

852

*06080 >

852

Drive type

9 min

hexagonal drive

Made of steel

Barrel nut

*American market only

cross slot

01056 >

835

877

Other colours on request Ø13 Ø12x11

1.4

7.5/8

Ø3.3 B B - nominal adjust to suit application

10000 Pcs

Made of plastic

Screw cap

Ø13

01020

1.8 Ø3.5

pozi, philips drive

01020 >

835

877

hexagonal drive

01042 >

835

877

Other colours on request Ø13

01042

10000 Pcs (01042) 5000 Pcs (01020)

1.4 Ø3.3

Made of plastic

Ø13

1.9 1.8

System 1 Connecting Screws

040

Connectors

827-6201 >

White

040

Ochre

Ø10

827-6202 >

Universal

827-4013 >

330

350

For allen key slot head

827-4130 >

330

350

Technical and mounting details

Crosshead screwdriver slot

Item number

Zinc plated

· Screws with crosshead PZ2 screwdriver or allen key slot · Decorative cover caps are available in different colours

Ø7

1000 Pcs

Ø7

Ø5

Ø7

Ø10

Ø 11.5

Ø5

Made of steel

Allen-key slot 4

Ø 10

Ø7 50

Ø7

Ø10

Ø5

Ø13 2.5

Ø4.4

Made of steel Ø5

1000 Pcs

Ø7

Cover caps for connecting screws

Ø12 827-4013

5.8 2.6

Ø13

827-4130

2.5 Ø4.4

1000 Pcs (827-4130) 2000 Pcs (827-4013)

Made of plastic

1.10

System 2 Fittings for Face-boring Applications

System Features A family of face boring only concealed fittings and rail fasteners with wide tolerances and the enormous clamping power of an angled screw.

1.11

· Factory or site component installation · Wide tolerances · Face boring only · Cover caps for concealment · For kitchen, furniture storage, office and store fixture applications · Non twist rail fastener versions · Multi use ‘pocket screw’ replacement

Housing assembly

02046 > Ø25x11 Ø25x11

White

Item number

Black

Technical and mounting details

835

877

Ø10x12 Ø10x12 6 6

12 12

2500 Pcs

Made of plastic, steel

Housing (no nose)

877

*02985 > *European market only Ø25x11 Ø25x11

6 6

12 12

2500 Pcs

Made of plastic

Screw panhead No 8 x 17.6

15000 Pcs

883

01709 >

Made of steel

Cover cap

01732 >

806

877

Other colours on request

7000 Pcs Inserts Made of plastic

Made of plastic > see page 1.64

1.12

Connectors

Zinc plated

· Combination of hi-thread screw and nylon insert allows a high clamping force improving cabinet rigidity · Unlimited stacking height due to flush housing · Provides a strong, secure fitting which eliminates the need for edge boring · +/-1mm tolerance absorbs drilling inaccuracies improving consumer confidence in use

Brown beige

System 2 Fittings for Face-boring Applications Concealed Fittings

System 2 Fittings for Face-boring Applications

Technical and mounting details

Rail fastener

Ø10.6

Ø4.5

831

867

White

Light brown

02075 >

11.5

Ivory

Item number

Dark brown

· Range of fixing blocks for multiple applications · Face drilling only required · Durable plastic material is flexible providing greater holding power · Choose screw fastening or hammer insertion

877

10 16

16 32.5

11.5

to suit

TL5 Ø10.6 17

Ø4.5

Ø10x10.5

2000 Pcs

16 32.5

Made of plastic

17 30

Housing (no nose)

10 7

16 13.5

13.5 11.5

17 Ø10.6

17 30 16 32.5

2000 Pcs

Made of plastic

Modesty block

Ø4.5

13.5 13.5 16

Ø4.5

*06073 >

17 30

1500 Pcs

1.13

Made of plastic

877

18 5

875

02077 > Ø4.5

Ø4.5

*European market only

13.5 13.5

867

877

1.14

Connectors

System 3 Fittings for Face and Edge Boring

System Features Titus System 3 is a two component rigid face and edge drilled fastening with half turn to fasten. System 3 offers almost full concealment and wide tolerances in use.

1.15

· Automatic or in-factory placement · Pre-location pin ensures ease of assembly · Less than one turn of a screwdriver to fasten · Shelf edge installation of pin means maximum shelf cut size tolerance · Can be used on 12mm shelf panels · No loose parts for maximum convenience in RTA · Drawer front fixing, cabinet construction

System 3 Fittings for Face and Edge Boring Concealed Housing

· One turn locking system reduces assembly time, both in the factory and home · Pre-assembly feature for consumer convenience · Choice of dowels to suit drilling · Hi-Lo screw feature for faster insertion

3168

Connectors

3180 POZIDRIVE

H 10 12

X-Y+7

3121 3180 3118 POZIDRIVE

03118 >

835

03121 >

835

White

12.5

877

Ø25 x D (Y=9.5 MAX)

Housing assembly

Item number

Yellow passivate

Technical and mounting details

3168

Zinc plated

Black

3118 3180 POZIDRIVE

Drilling diameter for dowel thread

Drilling length for dowel

H 3121

Drilling depth

3168

Other colours on request

Ø25 x D Ø5 x 30 Y Y X X

Made of plastic or zinc, plastic

xC Ø25 x ØD2 D YY Y XX X

X-Y+7 X-Y+7 X-Y+7

Ø5 x 30

883

03168 >

(Y=9.5 MAX) (Y=9.5 (Y=9.5 MAX) MAX)

Screw dowel Ø5

3118 X-Y+7 X-Y+7

2500 Pcs

3121

(Y=9.5 MAX) (Y=9.5 MAX)

H X, Y - depends on board thickness

Made of steel

Screw dowel Ø3

X-Y+7

ØD2 x C

(Y=9.5 MAX)

YY XX

1000 Pcs

X-Y+7 X-Y+7

ØD2 x C Ø5 x 30

(Y=9.5 (Y=9.5MAX) MAX)

X, Y - depends on board thickness

X, Y - depends on board thickness 5000 Pcs (03180) 4000 Pcs (03181) 1000 Pcs (03190)

3.75

03181 >

881

03180 >

881

*03090 >

883

*American market only

Made of steel

Cover cap

15000 Pcs

03150 >

835

877

Made of plastic

1.16

System 4 Fittings for Face-boring Only

System Features

Quickloc™ One-piece connector

Quickloc™ Assembly

Cost effective one piece fittings with face boring benefits

· · · · ·

The integrated housing and dowel make Quickloc™ the most user-friendly and tolerant product available.

· · · ·

1. Press Quickloc into the face board

2. Assemble the panels

3. Tighten in less than one turn

1.17

Flush and block components Face-boring only Good tolerances One piece connectors Angledriv versions fastening with maximum driving power and flexibility · Quickloc™ versions need only one turn to tighten for fast assembly · Foolproof consumer home insertion

High degree of drilling tolerance Push-in design Tool-free insertion Integrated expanding housing and dowel provide consistently stronger joints · ‘Klix’ locking system

System 4 Quickloc™ One Piece Expanding Connector

· An innovative, one-piece connector, capable of hand insertion · Is highly tolerant and tightens in less than one turn · Is a face-bored product · Offers a high degree of drilling tolerance and is the only connector of its type to provide pull-up of cabinet panels when tightened

6803

Ø8

9.5

6803

Ø20

22 4.5

Ø8

6803

831

835

877

06806 >

831

835

877

06813 >

831

835

877

06839 >

831

835

877

Ø20

6813

06803 >

Ø8

9.5

White

4.5

6803

Item number

Black

9.5

Technical and mounting details

Ø20

Quickloc Ø2010 flanged

10 9.5

Dark brown

9.5

Connectors

Ø8

4.5 Ø19.6

Ø8 10

6806 9.5 Ø20

2500 Pcs Quickloc Ø20 flush

11.5

Made of zinc, plastic

4.5 10Ø19.6

Ø8

6806

9.5

6813

11.5

Ø19.6

6806

Ø19.6

Ø8

Ø10

11.5

9.5

Ø20

Ø25

Ø20

Ø8

9.5

Ø25

6.5

Ø10

A 1

10.5

Ø8

Ø10

10 9.5

Ø20

1500 Pcs12

6.5

6839

Quickloc Ø25 flush

Ø10

A 1

10.5

9.5 1

Made12of zinc, plasticØ8

12.2

Ø8

Made of zinc, 13 plastic

6.5

Ø20

6.5

6839

11.5

Ø8

Ø25

2500 Pcs 6806Ø25 12 Quickloc flanged

Ø8

Ø25

Ø10

6.5

Ø10

13 12

12.2

Made of zinc, plastic

1500 Pcs

Ø10

1.18

System 4 Fittings for Face-boring Only Flushbloc™ / Flushfix™ · The Angeldriv screw provides high level of tolerance · Face drilling only required · Corner joint and shelf fixing options

Ø10.6

11.8

Flushfix™ 2161

27.5

02161 >

806

861

877

Zinc

Technical and mounting details

White

Item number

27.5

2193

Silver

unthumped thumped

Black

0021 0022

thread - single start thread - twin start

Brown beige

2172 2182

Other colours on request

Ø5x13 10

2172 2182

thread - single start thread - twin start

Ø10.6

11.8

4.5 Ø25x11

2500 Pcs

0021 0022

unthumped thumped

Made of plastic

Ø5x13

Flushbloc™ with screw 27.5

0021 0022

thread - single start thread - twin start

Ø10.6

Made of zinc and plastic

877

4.5

Ø25x11

Ø5x13 12

Ø5x13

27.5

Ø25x11 10

835

Other colours on request

4.5

Flushbloc™ assembly 2193

877

Ø25x11

unthumped thumped 10

835

Ø5x13 12

Ø5x13

11.8 27.5

02193 > 4.5

Ø25x11

10 2172 2182 2161

4.5

Ø25x11 2193

2000 Pcs

Ø5x13 12

*02190 >

Ø5x13 12

4.5

* American market only Other colours on request

4.5

Ø25x11

4.5 Ø25x11 Ø5x13

2500 Pcs

Made of plastic

2161

Angeldriv screw for use with Flushfix™

Ø10

Ø6 14.5 19

Ø5x13

27.5

4.5

Ø25x11

round head

00021 >

885

4.5 flat head

00022 >

885

Ø25x11

Ø5x13 Ø5x13

4.5

2000 Pcs (00021) 4000 Pcs (00022)

1.19

Made of zinc

Ø25x11 Ø25x11

4.5 12

System 4 Fittings for Face-boring Only Minibloc™ / Twinbloc™

· One-piece connector range · Face drilling only required · Easy to use, foolproof home insertion ASSEMBLY · Angeldriv screw tolerates good levels of inaccurate drilling increasing consumer confidence

16 14

2120

10.5

Ø10.5 17

16 13

2144

Dark brown

Black

Silver

White

Drilling depth

2141

02107 >

831

835

861

877

212011

* 02120 >

831

835

861

877

02141 >

835

861

877

* 02144 >

835

10.5

Technical and mounting details

Ø8.2 2130

ASSEMBLY

Minibloc Ø10

17 17

16 1414

2107

2139

10.5

10.5 32

Ø10.5

16 16

0021 0022

2107

Ø6

16 16

10.52141

17 9.5 17 6 13 278.4129 12 14 14 6 10.5 19 Ø10.5 10.5 10.5

21.5

11 17

Ø1011

Ø8 x 13 Ø8 x D 10Ø10 x D Ø10 x D

0021

unthumped thumped17 14 17 6

16 160022 13 13

3000 Pcs 2130 2130 Twinbloc Ø10

15.5

10.5 10.5 Ø10.5

2139

2144 2144

Ø10

278.4129

21.5 0021 19unthumped thumped 0022 6

10 6

Ø5 x 10.5 15.5 17 17 Ø10 Ø6

Ø3

Ø10 11 Ø5 xx13 Ø8 x14.5 D

Ø10.5 Ø10.5

278.4129

21.5

0021 0021 0022 0022

6 unthumped unthumped thumped thumped

02130 >

835

* 02139 >

835

10 6 Ø5 x 10.5 15.5 Ø10 x 11

Ø10 Ø10

861

877 877

* assembly with screw Other colours on request

9.5

11 2139 2139

Ø10

32 32

877

* assembly with screw *European market only Other colours on request

Ø10 x D

9.5 Made Ø8.2of zinc, plastic Ø8.2

1000 Pcs

Ø3 2120 2120

17 Ø5 x 10.5 11 Ø10 Ø10 x 11 Ø6 Ø5 x 13 14.5 Ø8 Ø10x xDD

14 14

10.5 10.5

2139

Ø10.5 Ø10.5

10.5 2141 2141

ASSEMBLY ASSEMBLY

214411

Ø8.2 2130

2120

14.5

MadeØ10.5 of zinc, plastic

Minibloc Ø8

2144

Ø10

Ø8.2 10.5

2500 Pcs (02107) 2130 3000 Pcs (02120)

2107 2107

unthumped 14 10.5 thumped

ASSEMBLY

Ø5 x 10.5 Ø10 x D

Item number

* assembly with screw Other colours on request

Ø10.5

2141

Connectors

2107

Ø3

Ø6 Ø6 14.5 14.5

Made of zinc, plastic Ø10 Ø10

Angledriv screw > see page 1.19 9.5 9.5 12 12

21.5 21.5

19 19

278.4129 278.4129

10 10 6 6

15.5 15.5

Ø3 Ø3

1.20

Fitting

278-4129 > 9.5 12 19

21.5 Ø10

10 6

Ø3

15.5

5000 Pcs

Made of plastic

Screw

825-7561 > Ø3.5 25

5000 Pcs

1.21

Made of steel

040

Brown

Item number

White

Technical and mounting details

Zinc plated

System 4 Fittings for Face-boring Only Knock-down Fittings

350

370

System 4 Fittings for Face-boring Only Cambloc

279-9187 >

960

970

980

279-9465 >

960

970

980

21 47

32 13

7.5

1000 Pcs

Made of plastic, zinc cam

Knock-in

21 16

32 13 Ø10 11 Ø10

7.5

500 Pcs

Made of plastic, zinc cam

1.22

Connectors

Zinc plated + black housing

Screw-on

Item number

Zinc plated + brown housing

Technical and mounting details

Zinc plated + white housing

· Screw-on and knock-in versions are available · Plastic housings are available in different colours · Quick and intuitive assembly when fittings are pre-mounted on furniture

System 5 Cams and Dowels

System Features The most advanced cam and dowel range

Titus System 5 is a comprehensive range of cam and dowel connecting fittings with 'Klix' and Quickfit features for all cabinet applications: panel-to-panel, panel-to-hollow profile, back-to-back

• Quickfit dowels quick hand insertion, easy assembly

Dowels

• Turned dowels (steel) ‘traditional’ design, smooth surface, best strength performance

•Q uickfit TL5, 'Full metal jacket' a high performance Quickfit dowel for use in multiple wooden materials •Q uickfit TL2, TL4, TL5 dowels a unique solution for factory pre-insertion, high level of drilling tolerances

Titus 'Klix'™

Titus 'Klix' locking system ensures the engagement of the interlocking teeth on cam and dowel providing: · vibration-proof joint · r igid construction that will not loosen in service or transit

Dowel insertion time comparison

Quickfit dowel 1 Second

2 o'clock lock Smooth closing

1.23

Twin start thread Combi dowel 4 Seconds

Single start thread Standard dowel 7 Seconds

Linear cam profile assures smooth, firm tightening action and greater pull-up. The cam always locks at 2 o'clock lock (230°), enabling greater consumer confidence in use while improving furniture quality.

• Diecast dowels (zinc) precise manufacturing, optimal shape and design

• Combi dowels (zinc and steel) high precision of zinc, strength of steel, 100% dimensional accuracy and optimal performance

max.25(29/35) ETHC

min.23(27/25) ETHC

Drilling tolerances

Optimal performance and perfect joint even with inaccurate drillings. ±1 mm

+/-0.5mm

Typical ETHC (EDGE TO HOLE CENTRE) max.25 measurements

min.23.5 (33.5) ETHC

max.24.5(34.5) ETHC

Tolerance range

Tolerance range Intervallo di tolleranza

ETHC

Number of Occurences

Zinc/Combi dowel

18 16 14

+ / - 0.5 mm

Tolerance range Intervallo di tolleranza

10 8 6 4 2 0

Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

+/-1mm

Number of Occurences

max.25(29/35) ETHC

Tolerance range Intervallo di tolleranza

Typical ETHC (EDGE TO HOLE CENTRE) measurements

max.25(29/35) ETHC 20 18 min.23(27/25) ETHC 16 14

+ / - 0.5 mm

Tolerance range Tolerance range Intervallo di tolleranza

10 8 6

Quickfit TL2/TL5

min.23(27/25) ETHC

measurements

Number of Occurences

Quickfit TL5 dowel, Quickfit TL2 dowel

4 2 0

18 16 14

+ / - 1 mm

12 10 8 6 4 2

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

Series1

0 Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

±1 mm

+/-1mm ±1 mm

max.24.5(34.5)

Number of Occurences

+/-1mm

ETHC

16 14

Tolerance + / - 0.5 mm

range Intervallo di tolleranza

12 10 8 6 4 2 0

Series1

max.25 ETHC 20

measurements

18 16 14

Tolerance range Tolerance range Intervallo di tolleranza

10 8 6 4

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

Dowels for factory insertion

0 Series1

ETHC=Edge To Hole Center

min.23 ETHC

Quickfit TL4

measurements

20 18 16 14

Tolerance range 12 Intervallo di 10tolleranza

+ / - 1 mm

2 23,0

max.25 ETHC min.23 ETHC

min.23.5 (33.5) ETHC Quickfit TL2/TL5

Number of Occurences

Quickfit TL4 dowel

ETHC Typical ETHC (EDGE TO HOLE CENTRE) min.23.5 (33.5) measurements

+ / - 1 mm

8 6 4 2

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

0 Series1

23,0

23,1

23,2

23,3

23,4

23,5

23,6

23,7

23,8

23,9

24,0

24,1

24,2

24,3

24,4

24,5

24,6

24,7

24,8

24,9

25,0

ETHC

Quickfit TL5, Quickfit TL4 and Quickfit TL2 are the only available dowels allowing factory preinsertion · Easier packing · Less damages in handling · Perfect for the RTA market

1.24

Connectors

Tolerance range Intervallo di tolleranza

System 5 Cams and Dowels

Cam5000 Highly resistant joint for strong cabinet construction

Reinforced cam evenly engages the hole and prevents cam tilting and cam bursting. Increased joint resistance enables effective performance in wider tolerance range.

Linear cam profile

Linear cam profile ensures: · Smooth tightening action · Greater dowel pull-up

Cam retaining pips

Cam retaining pips ensures: · The cam is held in position prior to assembly · Secure cam positioning during transport and handling · Accurate factory insertion

2 o'clock lock

Smooth and noticeable locking at the 2 o'clock position guarantees: · always-right tightening for home assembly · strong and rigid cabinet construction

1.25

Optimised cam profile ensures smooth and tight joint with no gap between panels.

Optimal performance with all Titus dowels

Quickfit TL, Quickfit, Combi, end, double ended, angled and other screw-in dowels

Connectors

Optimised cam profile

1.26

System 5 Cams and Dowels

Quickfit Connectors It is the fastest assembly system on the market. The Quickfit™ dowel may be inserted by hand, using only finger pressure. This eliminates the labour intensive process of screw-in assembly and the potential panel damage.

Assembly

1. Press the cam into face board

3. Assemble the panels

The Quickfit™ range of dowels has been extended to provide a complete family of fittings available in diameters of 5mm, 8mm and 10mm and lenghts of 24mm and 34mm. These dowels are compatible with the range of TitusØ15mm cams.

2. Insert the dowel into side panel

4. Tighten the cam to lock dowel

5. Assembled panels

1.27

Drilling tolerances

Assembly

Quickfit-TL™ dowel offers furniture manufacturers a fast assembly system providing high drilling tolerances. It has a built-in self-adjustment feature, which enables common drilling inaccuracies to be overcome.

For the self-assembly furniture consumer, Titus Quickfit-TL™ is the most consumer friendly fitting on the market. Apart from the benefit of fully tightened joints and easy locking into the same position, Quickfit-TL™ provides an exceptionally smooth action when tightened, requiring very little effort.

Marginal inconsistencies of drilling and the problems associated with the natural movement of wood panels, no longer present problems.

Quickfit-TL™ provides a tolerance of +1/-1mm on drilling operation while ensuring that the final result is a perfectly precise and aligned joint. No other assembly fittings system can offer such tolerances and still maintain a perfect joint.

1. Press the cam into face board

2a. Either push dowel into edge hole or...

2b. Insert the dowel into side panel

3. Assemble the panels

4. Tighten cam to lock dowel

1.28

Connectors

Quickfit TL Connectors

System 5 Cams and Dowels

Quickfit TL5 'Full Metal Jacket' Effective performance in multiple wooden materials

Smooth and noticeable locking at the 2 o'clock position position guarantees: · tight joints · always-right tightening at home assembly Ø5 · strong and rigid cabinet construction

Strong and reliable joint

Expanding steel sleeve assures high resistance to torsion and pull-out.

±1 mm

TL3

High drilling tolerances

An extended dowel head design works as a positive stop against the cam and provides an ETHC tolerance of min. +/-1mm

TL2

min. 23 (33) ETHC

max. 25 (35) ETHC

Tolerance range

Fully tightened joint assured even at marginal inconsistencies of drilling and problems associated with the natural movement of wood panels. extended drilling tolerance range

33 ETHC

35 ETHC

ETHC-Edge To Hole Center

normal drilling tolerance range

extended drilling tolerance range

typical graph of Edge To Hole Center drilling mismatches

number of specimen

-1.0 mm

1.29

-0.5 mm

+0.5 mm

+1.0 mm

· Acts as a positive stop when face inserted · Ensures correct insertion depth

Tool-free insertion for Ø5mm dowel holes

Quickfit TL5 reliably engages the 5mm dowel hole. It enables the usage of tool-less Quickfit dowel insertion technology across a wide range of applications.

50% less time to assemble the cabinet at home

Connectors

Shape of dowel sleeve

Ø5

When edge inserted the dowel engages the cam and remains securely positioned until the boards are locked together.

For maximum efficiency the insertion process can be automated using the Titus proprietary Lama FastFit machine.

Fast and easy cabinet assembly at home.

1.30

System 5 Cams and Dowels

Zinc+steel Combi Dowels Zinc+steel technology for optimal strength and performance

The Combi dowel combines steel and a small amount of zinc to ensure high precision and dimensional accuracy, essential to provide furniture manufacturers with the broadest possible range of drilling tolerances.

toroidal head form steel neck and head zinc body

positive stop collar twinstart thread

The steel neck and head provide better resistance to torsion and pull-out enabling a high performance joint

Zinc body: Positive stop collar ensures correct insertion depth Twinstart for faster and more stable insertion

Cam

small bursting angle

The toroidal dowel head form transfers the forces between cam and dowel more effectively resulting in a small cam bursting force. Dowel

100% dimensional accuracy assured

1.31

rat

System 5 Quickfit TL5 'Full Metal Jacket' · Tool-free insertion technology for Ø5mm dowel holes · Drilling tolerances of +1/-1mm when edge or face inserted · Expanding steel sleeve assures a strong joint, highly resistant to pull-out · Functions in multiple wooden materials (chipboard, MDF, solid wood)

Technical details

Quickfit TL5 dowel Ø5 x 12

Ø8

Item number

Zinc corrosil

Drilling distance

Ø8

09652

897

09651

897

±1 mm

TL3

33 ETHC

35 ETHC

To be used with Cam5000 only

TL2 Edge to hole tolerance

max. 25 (35) ETHC

min. 23 (25) ETHC

Tolerance range

2000 Pcs

Made of steel

1.32

Connectors

A Ø5 x 12

System 5 Cams and Dowels Quickfit TL Dowels

· Available in Ø5mm and Ø8mm for panel-to-panel applications · Suitable for use with all Ø15mm Cam2000, Cam3000 and Cam5000 products · ‘Klix’ locking feature provides a strong, vibration proof joint · Highly tolerant in edge-inserted, TL4 also in face-inserted applications

Quickfit TL2 ØD2 x 12 Ø8

±1 mm

D2=Ø5mm

TL3

TL2

D2=Ø8mm

min.23 (27/33) ETHC

max. 25 (29/35) ETHC

Edge to hole tolerance

Ø8 x 12

max. 25 (29/35) ETHC

ØD2 Ø8 x 12

880

05503

880

05441

880

05314

880

05474

880

05388

Made of zinc, plastic 24 Ø8 x 12

Hole to hole tolerance ±1 mm

TL3 Edge to hole tolerance

max. 25 ETHC

min.23 ETHC

Tolerance range TL2

max. 25 (29/35)

ETHC Made of zinc, plastic

min.23 (27/25) ETHC

835

Dark grey

Black

05453

Ø8

1.33

min.23 (27/25) ETHC

Quickfit TL4

2000 Pcs

Item number

Ø8

Tolerance range 2000 Pcs 1000 Pcs (05474)

Drilling diameter for dowel thread

Technical and mounting details

Drilling distance

System 5 Cams and Dowels Quickfit Dowels

Quickfit dowel Ø5mm

Item number

Dark grey

Technical and mounting details

Drilling distance

24 24

05714 > > 05714

880 880

880

20 20

05556 05556 > >

880 880

24 24

05563 05563 > >

880 880

05552 05552 > >

880 880

05554 05554 > >

880 880

24 24

05137 05137> >

880 880

*05570 *05570> >

880 880

05129 05129 > >

880 880

05685

Ø5 Ø8

A A

2000 Pcs

Made of zinc, plastic

Ø8 Ø5

Quickfit dowel Ø8mm

Ø8 Ø8

12 12

A A A

Ø8 Ø8 Ø8

Ø10 Ø5 Ø8 12 12 12

A A

1000 Pcs (05556,05552) 2000 Pcs (05563, 05554) Quickfit dowel Ø10mm

Made of zinc, plastic Ø8 Ø8

Ø8 Ø10 12 12

Ø10 Ø8

1500 Pcs (05129) 2000 Pcs (05570)

* American market only * Works only with Cam2000

Made of zinc, plastic

1.34

Connectors

· Available in Ø5mm, Ø8mm and Ø10mm for panel-topanel applications · Suitable for use with all Ø15mm Cam2000, Cam3000 and Cam5000 products · ‘Klix’ locking feature provides a strong, vibration proof joint · Depth stop collar for accurate insertion

System 5 Cams and Dowels Quickfit P2F Dowels · The only product to enable standard panel drilling and connection of panel and hollow profile · Available in Ø8mm for panel-to-hollow profile applications · Suitable for use with all Ø15mm Cam2000, Cam3000 and Cam5000 products · ‘Klix’ locking feature provides a strong, vibration proof joint

Technical and mounting details

Quickfit P2F

Ø7.8

Ø8 10

SYS05414/app

Ø8 x thru Ø8

2000 Pcs

1.35

Made of zinc, plastic

1.0 - 1.5 approx.

Item number

05414

Black

Drilling distance

835

System 5 Cams and Dowels Combi Dowel

Drilling depth

Thread length

09435

885

9.5

09588

885

09443

885

8.5

09583

885

Philips PH2 head

*09424

885

Philips PH2 head

*09423

885

Philips PH2 head

8.5

*09456

09592

885

10.5

09594

885

Ø6

Item number

Zinc

Drilling distance

Ø7-8

Combi dowel Ø5

Ø5

Technical and mounting details

Ø5.8

A A

Connectors

· High quality zinc-steel dowel with greater resistance to torsion and pull-out · Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products · ‘Klix’ locking feature provides a strong, vibration proof joint · Twinstart thread for faster and reliable insertion

> 885 * American market only

1000 Pcs *2000 Pcs

Made of steel and zinc

Combi dowel M6 M6

Ø5.8 X

Ø7-8

1000 Pcs Inserts Made of zinc

M6 insert to suit

Made of steel and zinc > see page 1.63

Inserts Made of plastic

> see page 1.64

1.36

System 5 Cams and Dowels Combi Dowel

Combi dowel Ø5 Full body

PZ2 head

20.6 34.5

Item number

Zinc

Technical and mounting details

Ø5.8

Drilling distance

09597

885

09430

Ø6 Ø3.5 S

10.5 L

Ø5 Ø7-8

2000 Pcs

Made of steel and zinc

Combi dowel Ø7

Philips PH2 head Ø4.7 Ø5.8

Ø8.4 9.6

Ø7

Ø6 min.

1000 Pcs Inserts Made of plastic

1.37

Made of steel and zinc > see page 1.64

885

System 5 Cams and Dowels Double-ended Dowel

Ø7

Ø3.6

47.4

05929

883

67.4

05757

883

83.4

05858

883

85.4

05859

883

86.4

05753

883

62.4

05592

883

63.4

05857

883

65.4

05380

883

66.4

05778

883

Item number

Ø6 S L

Ø3.6

Ø7 Ø7-8

Ø6 S L

250 Pcs (05753) 500 Pcs Ø3.6 1000 Pcs (05929,05857)

Ø12

Ø7

*B=0 > no panel required

Made of steel Ø6

Dowel with circlip

S L Ø12

Ø7

Ø3.6

Ø6 S L

83.4

05752

883

85.4

05772

883

86.4

05751

883

63.4

05775

883

66.4

05774

883

Ø7-8

A B

250 Pcs 500 Pcs (05775, 05774)

Made of steel

1.38

Connectors

Technical and mounting details

Dowel without circlip

Panel thickness

Drilling distance

Zinc plated

· Available in Ø7mm · Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products · No circlip for increased tolerance · Available in a variety of lengths to suit most panel-topanel applications

System 5 Cams and Dowels Angled Dowels

Technical and mounting details

Item number

Angled dowel

05860

Ø7-8

Ø15

B/2 44 x

Distance x in mm 20° 25° 30° 35° 40° 45° 50° 55° 60° 65° 67,5° 70° 75° 80° 85° 13 61.9 57.9 55.3 53.5 51.7 50.5 49.5 48.6 47.8 47 46.7 46.4 45.7 45.1 44.6

15 64.6 60.1 57 54.7 52.9 51.5 50.3 49.3 48.3 47.5 47.1 46.7 46 45.3 44.7

16 66 61.2 57.9 55.4 53.5 52 50.7 49.6 48.6 47.7 47.3 46.9 46.1 45.4 44.7 B

18 68.8 63.3 59.6 56.9 54.7 53 51.6 50.3 49.2 48.2 47.7 47.3 46.4 45.6 44.8

19 70.1 64.4 60.5 57.6 55.3 53.5 52 50.7 49.5 48.4 47.9 47.5 46.5 45.7 44.8

22 74.2 67.6 63.1 59.7 57.1 55 53.2 51.7 50.4 49.1 48.6 48 46.9 45.9 45

23 75.6 68.7 63.9 60.4 57.7 55.5 53.6 52.1 50.6 49.4 48.8 48.2 47.1 46

250 Pcs

1.39

Made of steel

Zinc plated

· Suitable for applications requiring angled joints · Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products · Adjustable angle from 90° to 180°

883

oard hick.

Connectors

Cam 2000

Panel thickness

Connectors

Drilling distance

Mushroom Dowels

· Available in a variety of head and length combinations to suit most end panel applications · Suitable for use with all Ø12mm and Ø15mm Cam2000, Cam3000 and Cam5000 products · ‘Klix’ locking feature provides a strong, vibration proof joint · Both ‘mushroom’ and countersunk headed versions available

Mushroom dowel

board thick.

36.5

40.5

46.5

50.5

39.5 49.5

Ø7

43.5

Ø5.9

Ø11

Ø6-7 S

53.5

ETHC

5608 5609 5610 5611

39 46

board thick.

36.5

40.5

39.5 46.5

49.5

24 34

36.5

40.5

05608

885

39.5

43.5

05609

885

46.5

50.5

05610

885

49.5

53.5

05611

885

MUSHROOM

Ø7

43.5

Ø11

Ø5.9

50.5

53.5

Ø7-8 COUNTERSUNK

L 39

Ø7

42 49

Ø5.9

500 Pcs (05610, 05611) 1000 Pcs (05608, 05609) ETHC

Item number

Zinc

Technical and mountingMUSHROOM details

Total length

Ø7-8

Length

System 5 Cams and Dowels End Dowels

board thick.

Ø11B

A S

Made ofL zinc COUNTERSUNK

Countersunk

L Sdowel

39 46

Ø7

42 49 52

Ø5.9

05786

885

05787

885

Ø11 S L

Ø7-8

1000 Pcs

Made of zinc

Ø6-7

1.40

System 5 Cams and Dowels Ø15mm Cam5000

Panel thickness

9537

Technical and mounting details

Cam5000 cross drive

PZ2 drive 9537

9533

Item number

9.9

09695

885

15/16 12.5 7.5-8 11.9

09690

885

12/13 10.5 6 min 9533 Ø15

Zinc

Cam height

Drilling for dowel

Drilling depth

· Improved central shape for highly resistant joint · Suitable for use with all Titus dowels · ‘Klix’ locking feature provides a strong, vibration proof joint · Cam retaining pips ensure that cam is held in panel position prior to assembly

Ø15

5587 5563 5644

Ø15xD

5654 5656 5657 5676

Cam5000 hexagonal drive

5678 5679

Made of zinc combined drive with HEX

9537

11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

11.9 9.9 10.4 11.9

09699

885

18/19

09692

885

9-9.5 13.2 e

9533 Use standard cover caps with pin=Ø4mm Ø15

Ø15 5587

5563 5644

e Ø15

5654 5656 5657 5676 5678 5679

1.41

9.9 10.4

9537 15/16 12.5 7.5-8 11.9

Ø15xD

Made of zinc

Black available upon request

9533

1000 Pcs

e Ø15

1000 Pcs

11.9 9.9 10.4 11.9

System 5 Cams and Dowels Ø15mm Cam3000 · Its optimised shape provides a more efficient cam profile with smooth tightening action and greater dowel pull-up · Suitable for use with Combi dowels, forged steel dowels, Quickfit dowels and Quickfit TL dowels · ‘Klix’ locking feature provides a strong, vibration proof joint · Cam-retaining pips ensure that a cam is held in panel position prior to assembly

Cam3000 cross drive

953312/13

9537

15/16 e

9533

Zinc

Connectors

Cam height

Drilling for dowel

Technical and mounting details

Drilling depth

9537

Panel thickness

Item number

10.5

6 min

9.9

09495

885

12.5

7.5-8

11.9

09533

885

Ø15

Black available upon request

Ø15

5587 5563 5644

Ø15xD

5654 5656 5657 5678 5679

Made of zinc combined drive with HEX

9537

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

11.9 9.9 10.4

5676

Cam3000 hexagonal drive

e Ø15

1000 Pcs

9537

11.9

15/16

12.5

7.5-8

11.9

09537

885

18/19

9-9.5

13.2

09536

885

9533

Use standard cover caps with pin=Ø4mm

Ø15

Black available upon request

9533

Ø15 5587 5563 5644

Ø15xD

e Ø15

5654 5656 5657 5676 5678 5679

1000 Pcs

Made of zinc

1.42

11.9 9.9 10.4 11.9

System 5 Cams and Dowels Ø15mm Cam3000 S

Drilling depth

Drilling for dowel

Item number

15/16

12.5

7.5-8

09491

Technical and mounting details

PZ2 drive

Cam3000 S/15

Zinc corrosil

Zinc

Panel thickness

· Innovative design offers optimal performance with maximum cost effectiveness · Suitable for use with Combi dowels, forged steel dowels and Quickfit dowels · ‘Klix’ locking feature provides a strong, vibration proof joint · Cam-retaining pips ensure that a cam is held in panel position prior to assembly

885

897

11.9

11.9 Ø15

Ø15

5587 5563 5644

Ø15xD

Ø15

5654 5656 5657 5676

Made of zinc

Cam3000 S/12

12 min 9.5 min 6 min

PZ2 drive

9431

9406

*09406

5678 5679

5587

Ø15

5563 5644

Ø15xD

5654 5656 5657

Ø15

5676

min. 9.5

min. 6

9431 Made of zinc

5678 5679

9431

Cam3000 S/12

Philips PH2 drive

12 min 9.5 min 6 min

Ø15

Ø14.8/14.9

Ø15 9

Ø14.8/14.9

Made of zinc 09630

*09631

885

* American market only

5 9

Cover caps Made of plastic

885

9631

Ø15

1.43

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

9.9 10.4 11.9

6 6 7.5

10.5 12

9.9 10.4

6 6 7.5

10.5 12

6 6 7.5

10.5 12

11.9 9.9 10.4 11.9

897

1000 Pcs

D 10

* European market only

2000 Pcs

1000 Pcs

11.9 9.9 10.4 11.9

System 5 Cams and Dowels Ø15mm Cam2000 · Available in a variety of head, drive recess and board thickness versions to suit most applications · Suitable for use with all Titus dowels · ‘Klix’ locking feature provides a strong, vibration proof joint · Linear cam profile results in smooth, easy cam rotation and dowel pull-up

9.9 10.4

6 6 7.5

12/13

11.9

10.5 12

12/13 15/16

9.9 10.4

6 6 7.5

15/16

e Ø15

5654 5656 5657 5676

Ø15xD

5678 5679

11.9 9.9 10.4 11.9

6 6 7.5

10.5 12

Ø1510 10.5 12

5587

5563 5644

Ø17

11.9

1 mm

12/13 10.9

5652 Ø15

5658 5659

18/19 22/23

5654

25/26 28/29 29

5656 5657

Ø15xD

5676

Ø15

9.9 H 12/13 10.4 9.9 5586

5678 5679

H 12.4

13.9H 15.9 17.4 9.9

10 D B e 6 10min 10 10.5 12 66 12 7.5 D

e 6.5 8 9.5 e

10.9 11 12.5 14 D 16

10.4 10.4

5563 5644

11.9

11.9 H 9.9 9.9 5654 10.4 10.4

15/16 11.9

5656 5657

11.9

5676 5678 5679

9.9 10.4

11.9 18/19

6 7.5

10.5 12

6-6.5

25/26

10.5 12

28/29 29

9-9.5

Ø1514

11-11.5

22/23

05653

847 1 mm 885

05644

>Ø15 H847

25/26

17.9 12.5-13

28/29

19.4 14-15.5

5586

Ø17

9.9 10.4 5652

5587

1 mm

10 25/26 6 10 15/16 666 10.510.518/19 28/29 7.5-829 12.7 12 1222/23 7.5 7.5 6 6 7.5

885

15/16

10.512/13 18/19 15/16 12 22/23

6 7.5

847

6-6.5 12/13 *05587

11.5 7.5-8 12.7 231012/13 15/16 15/16 9.9 13 6 6 17.5 10 26

5675

5677 5587

>Ø17

Item number

12/13

13 16 19

Connectors

Drilling for dowel

Zinc

Nickel

5587 5563 5644

Ø15

Drilling depth

Technical and mounting details

Cam2000 Ø15xD Ø15xD

Panel thickness

Ø15

5563 5644

05654

11.9 5658

847 5675 5659

05656 > 5654

9.9

e885

6H 6 10.9 12.4 7.5

847 9.9

847

6.5 8 9.5

10.5 11 1212.5

17.5

885 6

10 10.4 10.5 6 5656 05657 5657 > 11.9847 7.5885 12 10 9.9 6 5676 10.4 10.5 6 5678 05676 > 847 885 12 7.5 11.9 5679

05678

10 D

88511.5

13.9 15.9 17.4

5677

5586

5652 B 5658 12 5659 12/13 B 5675 B

12/13 13 5677 16 15/16 19

23 26

15/16 18/19 22/23 25/26 28/29 29

885

Other finishes on request

500 Pcs (05676, 05678) D 1000 Pcs H e

B B

Cam2000 9.9 5587 Ø15xD 10.4 Ø15 headed 5563 Ø15xD

5644

11.9

6 6 7.5

Made of zinc B

12/13

10.5 12

12/13 15/16

Ø15

5654 5656 5657 5676 5678 5679

9.9 10.4

6 6 7.5

15/16

10.5 12

18/19 22/23

6 6 7.5

10.5 12

11.9

Ø15

5587 5563 5644 5587 5563 5644 5654

11.9 9.9 10.4

*Ultraflat - specially designed for thin panels (does not work with TL dowels)

5656 5657 5654 5676 5656 5678 5657 5679 5676 5678 5679

9.9 H 10.4

6 e 6 7.5 6 6 e 7.5

10 D 10.5 12 10

12/13 B 12/13 15/16 12/13

10.5 D 12

12/13 B 15/16

11.9 9.9 10.4 H 11.9 9.9 H 10.4 11.9 9.9 9.9 10.4 10.4 11.9 11.9 9.9 10.4 11.9

Ø17

6 e 6 7.5 6 6 6 6 7.5 7.5 6 6 7.5

10 D 10.5 12 10 10 10.5 10.5 12 12 10

Ø15

25/26 28/29 Ø15xD 29 e

10.5 12

5586

9.9 H

12 9.9

6 e

9.9H

6e 6.5 e8 9.5 6.5 11.5 8 13 9.5

5586

Ø17 Ø17

1 mm

5586 5652

10.9

15/16 118/19 mm B

Ø15

1 mm

H H12.4

22/23 15/16 25/26 18/19 28/29 22/23 29 25/26

Ø15

5658 5659 5652 5675 5658 5677 5659

28/29 29

5652 5658 5659 5675 5677

5675 5677

13.9 10.9 15.9 12.4 17.4 13.9 15.9 17.4

10.9 13 12.4 13.9 16 15.9 17.4

19 23 26 29

10min 10 6 12 6 10 D

12 B

10 D

12B

D e 12.5

B 16 19 13 23 16 26 19

14 11 16 12.5 17.5 14

8 16 17.5 9.5

23 12.5 26 14

12.9

11.5 13

17.5

14.5

16 19

23 26

9.5

11.5

16.5

19.4

14.5

Ø15

847

885

05652

847

885

05658

11 6.5 13 6.5 10.9min

11.5 13

*05586

5587 > 05659 5563 5644

05675 05677

> >

5654 5656 > 05679 5657

847

9.9847 10.4 11.9

847

9.9 10.4847

11.9

9.9 5676 Other finishes on request 10.4 *Ultraflat - specially designed5678 for thin panels (does not work with TL5679 dowels) 11.9

885

6885 10 10.5 6 12 7.5

885

B 12/13 12/13 15/16 B

10 6 6 885 10.5 12 7.5 10 6

18/19 22/23

10.5 12

28/29 29

6 7.5

500 Pcs (05675, 05677, 05679) Made of zinc 1000 Pcs Cover caps for Ø15 cams Made of plastic

> see page 1.65

1.44

15/16

25/26

System 5 Cams and Dowels Ø12mm Cam2000

· Suitable for all Titus screw-in dowels · Available in a variety of head, drive recess and board thickness versions to suit most applications · Particularly suited to drawer front attachment applications · ‘Klix’ locking feature provides a strong, vibration proof joint · Linear cam profile results in smooth, easy cam rotation and dowel pull-up

Ø15

Cam2000 Ø12

11.9

5654

12/13

10.5 12

12/13 15/16

9.9

15/16

10.4 10.5 18/19 6 10 min 6-6.5 12/13 12 22/23 7.5 11.9

5656 5657 5676 5678 5679

9.9 10.4

25/26

10.5 12

28/29 29

Ø15

05575

9.9

5652

10.9 12.4

5658 5659

6.5 8 9.5

12.5 14

13.9 83815.9 847 11.5

5675 5677

17.4

8851923

17.5

05578

885

18/19 13 min 9-9.5

05580

885

1 mm

897

7.5-8

11.9 15/16

Ø14

6 6 7.5

Ø17 1 mm Item number

5586

Corrosil zinc

5563 5644

6 6 7.5

Zinc

Technical and mounting details

Nickel plated

Ø15xD e

9.9 10.4

Drilling for dowel

Panel thickness

H 5587

Black painting plate

Drilling depth

Other finishes on request Ø12

Ø12

Ø12 x D

5587 5563 5644

Ø15xD

2000 Pcs B

Made of zinc

Ø15

Cam2000 Ø12 headed

9.9 10.4

12/13

11.9

6 6 7.5

10.5 12

12/13 15/16

9.9

5654

10.4 10.5 6 9.2 min 1211.9 12 7.5

5656 5657 5676 5678 5679

Ø14

9.9 10.4

1211.9 16

6 6 7.5

25/26

12.5

Ø12 x D e

Cover caps for Ø12 cams Made of plastic

1.45

5652

10.9 12.4

6.5 8 9.5

Ø15

05574

12.5 14

16 19

5658 5659

13.9 83815.9 847 11.5

5675 5677

Made of zinc > see page 1.65

Ø12

17.4

88523

17.5

05576

885

05579

885

Other finishes on request Ø12

1000 Pcs 2000 Pcs (05576)

5.25

28/29 29

1 mm

15/16 18/19 22/23

9.9

1 mm

10.5 12

10 min

Ø17

H 5586

897

1.46

Connectors

System 6 Quickfit-Expando Connectors

System Features

drop on

Applications

Side-entry Drop-on

side entry

A face boring connector family for 32mm system drilling with full range of panel and application variants for all cabinet manufacturing applications

System 6 consists of a range of 20mm and 25mm diameter housings, Quickfit™ and conventional dowels, end dowels and double ended dowels.

· Minimum drilling requirements · Linear cam design for constant tightening loads when driving · Angledriv feature on cam for maximum driving comfort · Interchangeable pins for wood, plastic and steel applications · Pins with twinstart drive for fast insertion · Interchangeable Quickfit pin fastenings available · Toolless fastening capable versions · Back-to-back fastenings for common vertical panel fixing of shelves

Housings are made from high grade plastic or zinc, with zinc cams.

Titus System 6 is ideal for use in high volume production of case goods, closet and garage storage systems. Because no

edge boring is required, it is an excellent choice for manufacturing environments with limited drilling capacity.

Side-entry insertion of shelfdrop panel: on from the side or from the top

Drop-on insertion of shelf panel: only from the top Using drop-on connections allows for one-man installation

side entry

Angledriv feature

1.47

The angledriv feature on the cam allows for the angled position of the screwdriver with the locking action creating a tight and secure joint.

Wedgefix-6 connector is a special fastener without cam, simply to snap onto a preinserted dowel.

Outrigger/ Non outrigger

Outrigger

Expando function

Expanding housings and dowels provide a tight joint.

Assembly

1. Press the housing into face board

2. Press the dowel into side panel

3. Assemble the panels

4. Tighten the joint

Connectors

System Features Non outrigger

1.48

System 6 Quickfit-Expando Expanding Dowels

· Available in Ø5mm, Ø8mm and Ø10mm for panelto-panel, panel-to-hollow profile and back-to-back applications · Suitable for applications with all Titus Ø20 and/or Ø25mm Expando-6 housings · ‘Klix’ locking feature provides a strong, vibration proof connection · Depth stop collar for accurate insertion

Dowel

D2= Ø5mm

Item number

06408

880

06410

880

06479

880

ØD2 x 12.5 ØD2 x 12.5

D2= Ø8mm

Ø8 x 12.5 Ø8 x 12.5

5000 Pcs Dowel Ø5 x 7.5 back-to-back applications

Made of zinc, plastic

Ø5 x 7.5 Ø5 x 7.5

Ø10 x 12.5 Ø10 x 12.5

5000 Pcs

1.49

Made of zinc, plastic

Black

Technical and mounting details

Dark grey

Drilling diameter for dowel thread

System 6 Quickfit-Expando Dowels

· Available in various Ø3mm and/or Ø5mm thread forms for screw-in, knock-in and/or ‘spiked’ hole applications · Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings · ‘Klix’ locking feature provides a strong, vibration proof connection · Dowels feature an integral skirt which acts as a positive stop during insertion

Connectors

Dowel Ø5 Ø5x8 Ø5xC Ø5x8

Item number

Zinc plated

Ø5xC

Technical and mounting details

Zinc

Ø5xC

Drilling depth for dowel thread

Ø5xC

06401

885

06402

885

883

11.5

06406

885

883

Ø5x8

2000 Pcs

Made of zinc or steel

Dowel Ø5 x 11 knock-in

Ø5x12 Ø5x8

06403

885

Ø5x12

2000 Pcs

Made of zinc

hole to suit M4 insert hole to suit M4 insert Ø5x12

Dowel M4 x 7

06405

883

06495

883

hole to suit M4 insert

Ø5x11.5 Ø5x11.5 hole to suit M4 insert

4500 Pcs

Made of steel

Ø5x11.5

Dowel Ø3 x 11.5 Ø3 max Ø3 max Ø5x11.5

Ø3 max

12500 Pcs Inserts Made of plastic

Made of steel > see page 1.64 Ø3 max

1.50

System 6 Quickfit-Expando Double-ended Dowels · For 16mm, 18mm and 19mm board · Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings · ‘Klix’ locking feature provides a strong, vibration proof connection

Technical and mounting details

Double-ended dowel

Ø4.8

Ø5.8

B Ø5 x thru

2500 Pcs

1.51

Made of zinc

Item number

Zinc

Ø9.5

Ø4.8

Panel thickness

1.5

06414

885

06413

885

06416

885

System 6 Quickfit-Expando End Dowels · For 16mm, 18mm and 19mm board · Suitable for applications with all Titus Ø20mm and/or Ø25mm Expando-6 housings · ‘Klix’ locking feature provides a strong, vibration proof connection SYS0606736/APP

Technical and mounting details

End dowel 1.5 Ø9.5

Ø4.8

Connectors Item number

Zinc

Panel thickness

06412

885

06411

885

06415

885

Ø5 x thru Ø4.8

2500 Pcs 1000 PCS (06411)

Ø5.8

Made of zinc

1.52

System 6 Quickfit-Expando 20mm Expanding Housing Non-outrigger

Ø20 x D

drop on

22 H H

2500 Pcs

500 Pcs

1.53

15/16

12.5

06435

831

861 877

9.25

18/19

06437

831

861 877

White plastic

7.75

Silver plastic

847

7.75

15/16

12.5

06447

847

9.25

18/19

06449

847

7.75 15/16

12.5

06431

831

861 877

9.25 18/19

06433

831

861 877

9.5

Made E of zinc

Other colours on request 9.5

2500 Pcs

Ø20 x D

06453

Made E of plastic

Drop-on

side entry

9.5

18/19

9.25

Other colours on request

Ø20 x D

drop on

847

Drop-on

side entry

9.5

06451

Made E of zinc

12.5

Ø20 x D

drop on

15/16

Item number

Side-entry

side entry

Drilling depth

Side-entry

7.75

Technical and mounting details

side entry

Panel thickness

500 Pcs

Nickel plated

drop on

Dark brown plastic

· Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications · Available in all-metal or plastic/metal options · ‘Klix’ locking feature provides a strong vibration proof connection · Compatible with all screw-in and Quickfit-6 dowels

Made of plastic

System 6 Quickfit-Expando 20mm Expanding Housing Outrigger

32 E

E 22

Connectors

7.75 15/16 12.5

06459

847

9.25 18/19 14

06461

847

White plastic

Nickel plated

Black plastic

Item number

Dark brown plastic

Drilling depth

Technical and mounting details

Side-entry

Panel thickness

Ø10 x 10.5 Ø20 x D

e 32

500 Pcs

Made of zinc

Side-entry H

9.5

32 E

E 22

Ø10 x 10.5 Ø20 x D

7.75 15/16 12.5 06443

9.25 18/19

06445

831 835

877

9.25 18/19

14 *06395

835

877

e 32

9.5

Other colours on request *American market only

1250 Pcs

Made of plastic

Drop-on

E 22

847

06457

847

7.75 15/16 12.5

06439

835

877

9.25 18/19

06441

831 835

877

9.25 18/19

*06397

835

877

9.5

Made of zinc

Drop-on

e 32

500 Pcs

06455

9.25 18/19

Ø10 x 10.5 Ø20 x D

7.75 15/16 12.5

E 22

Ø10 x 10.5 Ø20 x D

e 32

9.5

Other colours on request *American market only

1250 Pcs

Made of plastic

1.54

System 6 Quickfit-Expando Expanding Wedgefix Housing (no Inner Cam)

For use with screw-in dowels

9.25 18/19 11

861

06470

877

06473

877

835

831

861

06465

877

835

831

861

06464

7.75 15/16 12.5 22

Silver

Dark brown

Item number

Black

White

Technical and mounting details

Drilling depth

Panel thickness

· Available in 12mm, 15mm/16mm and/or 18mm/19mm versions for Quickfit-6 and/or Standard Dowel applications · Available in a variety of plastic colours · Wedgefix-6 housing allows easy customer handassembly or factory automated insertion · When used with Quickfit-6 dowels this provides a true toolless fastening system

861

Other colours on request Ø20 x D

e 9.5

2500 Pcs

Made of plastic

For use with Quickfit dowels 22

Ø20 x D

e 9.5

2500 Pcs

1.55

Made of plastic

7.75 15/16

12.5

06471

877

835 831

861

9.25 18/19

06472

877

835 831

861

Other colours on request

System 6 20mm Knock-in Housing Non-outrigger · Available in 15mm/16mm and 18mm/19mm versions for drop-on and/or side-entry applications · Available in all-metal or plastic/metal options · ‘Klix’ locking feature provides a strong vibration proof connection · Compatible with all screw-in and Quickfit-6 dowels

drop on

Connectors

side entry

White plastic

Side-entry

Item number

Silver plastic

Drilling depth

Technical and H mounting details

Panel thickness

7.75 15/16 12.5

06381

861

877

9.25 18/19

06385

861

877

Product available on American and Asian market only Other colours on request

Ø20 x D

e 9.5

2500 Pcs

Made of plastic

Drop-on

drop on

7.75 15/16 12.5

06383

861

877

9.25 18/19

06387

861

877

Product available on American and Asian market only

Other colours on request

Ø20 x D

side entry

9.5 H

2500 Pcs

Made of plastic

Cover cap 06463 Made of plastic

1.56

System 6 Quickfit-Expando 25mm Heavy Duty Expanding Housing Non-outrigger

· Suitable for 12mm, 15mm/16mm and 18mm/19mm board for drop-on and/or side-entry applications · All-metal · ‘Klix’ locking feature provides a strong vibration proof connection · Compatible with all System 6 Quickfit dowels

06953

847

06949

847

Item number

Nickel plated

Drilling for dowel

Side-entry

Drilling depth

Technical and mounting details

27.5

10.4

Ø25 x D

e 12

500 Pcs

Made of zinc

Drop-on

27.5

10.4

Ø25 x D

e 12

500 Pcs Dowels > see page 1.49

1.57

Made of zinc

System 6 Quickfit-Expando 25mm Heavy Duty Expanding Housing Outrigger

06951

847

06947

847

Item number

Nickel plated

Drilling for dowel

Side-entry

Drilling depth

Technical and mounting details

Connectors

· Suitable for 12mm, 15mm/16mm and 18mm/19mm board for drop-on and/or side-entry applications · Available in all-metal · ‘Klix’ locking feature provides a strong vibration proof connection · Compatible with all System 6 Quickfit dowels

27.5

Ø10 x 11

Ø25 x D

e 32

400 Pcs

Made of zinc

Drop-on

27.5

Ø10 x 11

Ø25 x D

e 32

500 Pcs

Made of zinc

Dowels > see page 1.49

1.58

System 7 Heavy Duty Ø20mm Cam and Dowel · Dowel available with Ø10mm eurothread and cam available in Ø20mm for a variety of panel thicknesses · ‘Klix’ locking feature provides strong, vibration proof joint · High strength product that eliminates the need for time consuming metal inserts

Technical and mounting details

Cam Ø20

500 Pcs

05409

885

18 min

05410

885

Made of zinc

Ø8

B 34

13 B

Ø20xB/2+6

1.59

B/2

Dowel Ø7 Ø10 mm thread

500 Pcs

Item number

Zinc

Panel thickness

Made of zinc

B/2

System 7 Heavy Duty Ø25mm Cam and Dowel

Cam not compatible with other dowels

Technical and mounting details

Raw

Item number

Cam

275-3096 >

Ø25

600

11.5

Ø25

275.2030

1000 Pcs

Made ofØ7 zinc

Dowel with euro thread

Ø25

11.5

Ø10

Ø7.5

275.4058 x=11 275.4035 x=13

275-2209

040

275-2030

040

34 Ø6

Ø7 25 39

Ø7.5

Ø5

11 Ø7.5

275.2209

1000 Pcs

Made of steel

M6 dowel 275.2030

34 Ø7

M6 25

Ø10

Ø7.5

275.4058 x=11 275.4035 x=13

1000 Pcs Cover cap Made of plastic

Made of

Ø6

Ø7 steel

> see page 1.65

25 39

Inserts Made of plastic

Ø7.5

> see page 1.64 Ø7.5

275.2209

275-4058 x=11 275-4035 x=13

Ø5

1.60

Connectors

For 13mm and thicker panels Cam drilling distance is 34mm A flat slot screwdriver must be used for cam tightening Decorative cover caps are available in different colours Dowel for direct installation in 5mm holes

Zinc plated blue

· · · · ·

System 7 Heavy Duty Dowels

Panel thickness

End dowel

52-B

Item number

275-2146

Brass plated black

Zinc plated blue

Drilling distance

Technical and mounting details

Overall length

Heavy duty only. Can’t be used with other cams.

040 *085

Ø3.8 Ø10

Ø7

* Available upon special request

275.2146

> see chapter Important Information 43

A=52-B A

Ø3.8

Ø7-8

Ø10

Ø7 Ø25 Ø3.8

500 Pcs

43 L 47

Made of steel

Dowel with circlip

25 B

Ø7

L 76 73

275.2146 275.0103 275.0106

275-0103

040

34LL

275-0106

040

Ø3.8 Ø10 Ø7Ø7

Ø7 Ø3.8 3.8

25 1

43 L L 47

73 275.2146 275.0103 275.2057 275.0106 275.2058

76 74 73 76

Ø7 Ø7

Ø7-8

Ø3.8 3.8

25 BL

275.0103 275.2057 275.0106 275.2058

L L 7476 73 76

500 Pcs

Made of steel

Dowel without circlip

Ø7

3.8 L

Ø7-8 B

500 Pcs

1.61

Made of steel

275-2057

040

34L

275-2058

040

275.2057

275.2058

System 7 High Strength Connectors Contract Fix™ System

Item number

M6 Dowel 7x34

Zinc

Technical and mounting details

Connectors

High performance fastener Thread design gives repeatability Multi-drive recess Higher than average pull up

Zinc plated

· · · ·

883

05971

05960

885

05917

885

Ø7-8 7.5/9 34

1000 Pcs

Made of steel

Prekrivanje Housing cylinder 15x12

Ø7-8 7.5/9

Ø15x12.5/14 34

Ø15x12.5/14

1000 Pcs

Made of zinc Ø7-8

Grub screw

7.5/9 34

Ø15x12.5/14

2500 Pcs Inserts Made of zinc

Made of zinc > see page 1.63

1.62

Technical and mounting details

Raw

Accessories for Connectors Inserts

Item number

Ø8 x 9

408-3166

600

408-3391

600

408-3423

600

Ø8

M6 9

500 Pcs

Made of zinc

Ø9 x 13

M6M6 Ø9

002175

Ø9.5

13 13

1000 Pcs

Made of zinc

Ø9.5 x 18

Ø9.5

1000 Pcs

Made of zinc 408-3424

Ø12 x 15

M8 15

1000 Pcs

1.63

Made of zinc

Ø12

600

· · · ·

Available in both zinc and plastic for use in various applications Suitable for use with various threaded dowels Suitable for use with various panel thicknesses Knock-in and screw-in versions available

Ø10

Ø10 x 13/M6 nut 13

Ø10 M6

Ø10

M4 M6 M6

Made of plastic

M6 M6

Ø10 Ø8Ø10

2182

twin-start Euro thread

50000 Pcs

2172

single-start Euro thread

2182

twin-start Euro thread M4

Made of plastic

2172Euro thread single-start Euro thread single-start

2182

2182 twin-start Euro thread twin-start Euro thread

Connectors

275-4058

200

276-4036

200

2172

2172 Euro single-start single-start thread Euro thread

2182

2182 Eurotwin-start twin-start thread Euro thread

Ø8

M6 M4

Ø10

Ø10 10 C

Ø8

12 10

10 Ø10

M4 Ø8 Ø10

Ø8

Ø10

twinstart thread 10

02182

846

Ø10

10000 Pcs

Ø10 Ø10

Ø10 Ø8

2172

Euro thread

200

13 10 C

M4 M6

Ø10

Ø8 x 10/M4 nut

single-start Euro thread

Ø10

275-4058

2172

275-4035

M6 Ø10

30000 Pcs (275-4058)

275-4035

20000 Pcs (275-4035)

Item number

Natural

Technical and mounting details

Natural white

Drilling length for insert

Made of plastic

1.64

Accessories for Connectors Cover Caps · Available in a variety of colours · Suitable for use with both pozi and hex cam drive features · Suitable for use with various diameter cams · Both domed and flat versions available

Ø17 X Ø3.2

*01029

2.5

277-4355

> >

834

835

867

882

370

390

330

380

330

380

330

380

*American market only Other colours on request Suitable for cams with Pozi 2 recess

2.5

Ø17 Ø15

3.3

Light grey

Cover cap Ø17

Light brown

Item number

Black

Technical and mounting details

Dark brown

Ø4.2 Ø17 Ø29.5

1000 Pcs

Made of plastic

Cover cap Ø17

Ø3.2 Ø13

2.5

Ø17

277-4225

370

390

Other colours on request Ø4.2

Ø15 Ø15

Ø17 Ø29.5

Suitable for cams with Hex recess

X Ø3.2

Ø25

1000 Pcs

Made of plastic

2.5

Ø17

Ø13

Ø4.2

Ø13

Cover cap Ø29.5

Ø29.5

275-4034

370

Other colours on request

Ø25 Ø25

500 Pcs

1.65

Made of plastic

390

1.66

Connectors

Furniture Soft Closing Systems

Glissando Product Guide

Page

Glissando for Concealed Hinges Add-on hinge soft closing solution Glissando TL Glissando TT Glissando TL 170

Glissando AL

2.15 · effortless silent and safe door closing · fits the hinge’s standard drilling patterns · easy retrofit installation · adjustable to different door sizes and weights · perfect door motion · doesn’t occupy additional space inside the cabinet

Stand-alone door soft closing solution Glissando CR

2.21 · effortless silent and safe door closing · easy retrofit installation · adjustable to different door sizes and weights · perfect door motion

Titusoft for Drawers Stand-alone drawer soft closing solution Titusoft for wooden drawers Titusoft for metal drawers

2.3

2.23 · self closing and soft closing in single mechanism · safe drawer closing · easy retrofit installation

Titusoft for Sliding Doors Stand-alone sliding door soft closing solution Titusoft SD100 Titusoft SD100s

2.29 路 effortless silent and safe door closing 路 intuitive mounting 路 efficient damping 路 smooth and controled closing motion

2.4

Soft Closing Systems

Page

Glissando Soft Closing Range

How to Choose the Right Glissando? Glissando TL Glissando TT Glissando TL 170 Glissando CR

Titus Glissando soft closing system is available for the whole range of hinge applications. The user can choose between add-on hinge or stand-alone solutions.

Concealed hinges

Glissando TL

Glissando TT

T-type 110

T-type 110/15°

T-type 110/30°

T-type 110/45°

T-type 110/90°

T-type 120

T-type 170

Glissando TL 170

Glissando CR X

X X

S-type plus 110

S-type 110

S-type 110/15°

S-type 110/24°

S-type 110/30°

S-type 110/45°

S-type 110/90°

S-type 170

B-type 110

B-type 110/30°

B-type 110/45°

B-type 110/90°

B-type 170 Hinge Ø40

2.5

Stand-alone door soft closing solution

Add-on hinge soft closing solutions

X X

Glissando TT ‘one for all’ T-type

· One item fits multiple applications · Same item can be used on all crankings and angled hinges · Designed to fit the concealed hinge cup

· Toolless mounting · Suitable for different types of cabinets for kitchens, living rooms, bathrooms and other furniture

T-type 110 0mm

T-type 110 5mm

T-type 110 9mm

T-type 110 17mm

T-type 120 0mm

T-type 110/15° 9mm

T-type 110/30° 9mm

T-type 110/45° 9mm

T-type 110/45° 17mm

T-type 110/90° 17mm

2.6

Soft Closing Systems

Glissando Application

Glissando TL ‘one for all’ S-type B-type

· One item fits multiple applications · Same item can be used on all crankings and angled hinges · Adjustable damping enables perfect functioning on every door

S-type plus 110 0mm S-type 110 0mm S-type plus 110 9mm

· Designed to fit the concealed hinge cup · Toolless mounting · Suitable for different types of cabinets for kitchens, living rooms, bathrooms and other furniture

B-type 110 0mm

B-type 110 9mm

S-type 110 9mm

S-type 110 15mm

B-type 110 15mm

S-type 110/15° 9mm

B-type 110/30° 9mm

S-type 110/24° 9mm

B-type 110/45° 9mm

S-type 110/30° 9mm

B-type 110/45° 18mm

S-type 110/45° 9mm

B-type 110/90° 0mm

S-type 110/45° 18mm

B-type 110/90° 18mm

S-type 110/90° 18mm

2.7

Glissando Number per Door and Positioning

Titus Glissando soft closing devices can not be used with free-swinging door hinges. > see page 3.24 for details

Soft Closing Systems

How Many Glissandos per Door? Add-on hinge soft closing solution Glissando TL Glissando TT Glissando TL 170

Mount Glissando on the bottom hinge in case of 2 hinges on the door or on the middle hinge in case of 3 hinges on the door.

Glissando TT

Glissando TL, Glissando TL170

Glissando

No. of hinges

1-2

2-3

No. of Glissandos

Recommended number per door and positioning

Stand-alone soft closing solution Glissando CR

Glissando

No. of hinges

Mount Glissando CR on the hinged side of the cabinet on the top or bottom.

1-2

No. of Glissandos

Recommended number per door and positioning

No. of hinges

Glissando

3+ 3 2

1-2

No. of Glissandos

Recommended number per door and positioning

2.8

Glissando Mounting

How to Mount Glissando? Tool-less mounting Glissando TL Glissando TT Glissando TL 170

Simple toolless assembly: Insert Glissando into the holes on the hinge and press down with hand.

Screw-on into the cabinet corner

Glissando CR is mounted into the cabinet corner by using chipboard screws 20mm long.

Glissando CR

Glissando dampers’ discreet design enhances the look of the door and occupies minimal space in the cabinet interior.

The tool-less ‘snap on’ version for reduced assembly time and flexibility of application. Glissando TL can be mounted at any time after furniture assembly so can be offered as a retro fit option by the installer.

Screw-on onto the mounting plate Glissando AL

Position the mounting plate below the hinge arm and fix with two screws. Use hinge mounting plate as a reference.

2.9

Slide Glissando AL onto the mounting plate

Soft Closing Systems

Glissando Damping Adjustment

How to Adjust Damping? Add-on hinge soft closing solution Glissando TL Glissando TL 170

Glissando features quarter turn adjustment to provide optimal closing speed for any door dimensions and weight. The damping function can be adjusted to fit different door weights which enables · perfect door functioning · use of the same type of Glissando for various doors

Adjustable damping zone

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Stand-alone soft closing solution

Turn towards ‘+’ to increase or towards ‘-’ to decrease the damping.

Glissando CR Glissando AL

2.10

Glissando Titus Damper Inside

Titus Hydraulic Damper Efficient modular design

· Low number of assembly parts enables quick development of customised solutions · Engineered for efficient and high precision manufacturing · Wide range of applications

Wide operating scope

· High coefficient γ of Titus damper assures efficient damping at any closing speed · Damping force can be easily adapted to customer needs γ=

Damping force

FH FL FL

FH – damping force at slam speed (12mm/s) FL – damping force at slow speed (1mm/s)

Reliable damping and closing at any speed

Higher coefficient γ means reliable damping at high speed and ensures that the system will reach its final position even at very slow speed

Stroke

γ 7 6 3

2.11

Titus damper Industry range

2.12

Soft Closing Systems

Glissando Soft Closing Systems for Hinges

‘ConfidentClose’

Tool-less mounting

Adjustable damping

· 1 Fast closing · 2 Late start of deceleration action · 3 Quiet landing with ‘SoftTouch’

· Reduced assembly time · Flexible usage als as a retrofit option

· Consistent performance accross a broad range of furniture doors of different dimensions and weights

2.13

Soft Closing Systems

Easy tool-less adjstment

‘One for all’

‘Titus Damper Inside’

· Intuitive adjustment procedure · Controllable motion

· One item fits multiple applications · Same item can be used on all crankings and angled hinges

· Titus proprietary multi-purpose damping technology · Relaible and consistent damping

2.14

Glissando TL Glissando TT Add-on Hinge Soft Closing Solution

For 110° and 120° hinges

110° Interaxis

Interaxis

45mm

48mm 48

Technical details

Glissando TT ‘snap-on’ · T-type 110 · T-type 120

Damping force

Hinge opening angle

110°, 120°

9.5

Ø 35

Item number

729-0K71-054

200 Pcs

Made of steel and plastic

67.6

Glissando TL ‘snap-on’ · S-type plus 110 · S-type 110 · B-type 110

200 Pcs

2.15

Made of steel and plastic

43.5

110°

45N

951-0X94-050

110°

35N

951-0P59-050

110°

60N

951-0P63-050

Glissando TL

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Adjustable damping zone

Soft Closing Systems

· Same item can be used on all crankings and angled hinges · Designed to fit the concealed hinge cup and requires no extra space inside the cabinet · Adjustable damping · Tooless mounting

Mounting details Toolless assembly

Insert Glissando TL into the holes on the hinge

Press down

Glissando TT

Glissando TL

Glissando

No. of hinges

1-2

No additional drilling is required

1-2

2-3

Glissando

No. of hinges

2-3

No. of Glissandos

1-2

No. of Glissandos

Recommended number per door and positioning

2.16

Glissando TL 170 Add-on Hinge Soft Closing Solution

For T-type 170, S-type 170 and B-type 170

Hinge opening angle

Glissando TL 170 ‘snap-on’

Technical details 24

170°

170° 951-0F15-650

Item number

88.5

Box content 100 pcs soft closing mechanisms100 pcs striking plates

Soft closing mechanism

12.4

Striking plate

Made of steel and plastic

2.17

52.5

· Gentle and reliable soft closing on doors with wider opening angle · Fits perfectly 45/9.5mm, 48/6mm and 52/5.5mm hinge cups · Furniture consumers’ preferred ‘ConfidentClose’ · Tool free mounting

Damping adjustment

Soft Closing Systems

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting details Toolless mounting

Insert Glissando TL 170 into the holes on the hinge cup

Press down

Place the striking plate into the hole on the hinge arm

Press down

Glissando

No. of hinges

5 4 3 2

No additional drilling is required

1-2

No. of Glissandos

Recommended number per door and positioning

2.18

Glissando AL Add-on Hinge Soft-Closing System

14.3

Adjustment range (out): +5mm 14.3

Ø4.5

Half overlay mounting plate

Ø4.5 37

Ø4.5

27.5 27.5

37 27.5 27.5

Ø4.5

37 37

2.19

Ø4.5

380

972-4565

380

972-4566

380

Ø4.5

37 27.5

27.5

Ø4.5

Ø4.5 17

37 16

8 17

Ø4.5

972-4564

Adjustm 14.3

Adjustment range (out): +5mm 14.3

27.5

Inset door mounting plate

14.3

Ø4.5

Adjustment range (out): +5mm

Ø4.5

Full overlay mounting plate

8 16

8 37

Adjustm 14.3

13.8

Ø4.5

13.8 13.8

Adjustm 14.3

13.8 8

380

14.3

Ø4.5

972-0420

Glisando AL

Item number 13.8

Technical details

Grey

For 20mm aluminium frame doors

· Simple mounting · Intuitive damping adjustment

Damping adjustment

Soft Closing Systems

Turn towards ‘+’ to increase and ‘-’ to decrease the damping

Mounting procedure

Position the mounting plate below the hinge arm and fix with two screws. Use hinge mounting plate as a reference.

Slide Glissando AL onto the mounting plate

No. of hinges

Glissando

3+ 3 2

1-2

Recommended number per door and positioning

2.20

Glissando CR Stand-alone Door Soft Closing System

Beige

972-0X19 >

Grey

110Â° 0mm

Item number

White

Glissando CR for full overlay hinges

Cranking

Technical details

Hinge opening angle

For full overaly and half overaly concealed hinges

350

380

360

*Fixing screw included in a set Nominal 11 (Adjustment: Nominal + 5mm)

100 Pcs Glissando CR for half overlay hinges

2.21

Made of plastic

110Â° 9mm Nominal 10 (Adjustment: Nominal + 5mm)

972-0X34 >

380

· Intuitive ‘place and fix’ installation in the comer of the cabinet · Tool-less damping adjustment · One item for a wide range of doors · Reliable performance

Turn towards ‘+’ to increase and towards ‘-’ to decrease the damping

Mounting details Glissando CR

Glissando CR 35

Nominal 11 (Adjustment:16 Nominal + 5mm) 16

75 18 °

25 25

Nominal 11 (Adjustment: Nominal + 5mm)

Mount Glissando CR on the hinged side of the cabinet

One screw fixing

Glissando CR9 44 Further explanations > go to

Glissando CR9 44

Nominal 10 (Adjustment: Nominal + 5mm)

75 °

16,5

Nominal 10 (Adjustment: Nominal + 5mm)

http://www.youtube.com/watch?v=8-uWs_z2d0s

16,5

Mount Glissando CR on the hinged side of the cabinet

Further explanations > go to

One screw fixing

http://www.youtube.com/watch?v=8-uWs_z2d0s

The functioning of Glissando CR depends of the hinge’s closing force. A trial mounting is always recommended.

No. of hinges

Glissando

3+ 3 2

1-2

Recommended number per door and positioning

2.22

Soft Closing Systems

Damping adjustment

Titusoft WD

For wooden drawer with roller runners

Titusoft mechanism

973-0X35

380

Activator

973-4451

380 350

Titusoft WD

40.5

Titusoft mechanism

6.5

192 Ø 6.5

Ø 3.2

Ø3

192

214

6.5

Ø3

3. Ø

Ø 3.2

192

Ø3

6,5

Ø3 .7

Ø3 10

Activator

6,5

214

40.5

Ø 6.5

78 18 192

250 Pcs

2.23

Made of plastic

Ø3

Bag of 1 973-0X35-380-K2

120 Bags

Bag of 2 973-0X35-380-K1

80 Bags

· · · · ·

1 Titusoft mechanism 1 activator 2 screws Ø3.5mm x 20mm 2 screws Ø3.5mm x 12mm 1 Mounting instruction sheet

2 Titusoft housings 2 activators 4 screws Ø3.5mm x 20mm 4 screws Ø3.5mm x 12mm 1 Mounting instruction sheet

Zinc plated blue

Item number

White

Technical details

Grey

Soft Closing System for Wooden Drawer

Capacity chart

· Works with most roller runner drawer slides · Easy, intuitive mounting · Smooth soft closing action independent of drawer hardware · Optimal closing speed · Non handed design

load (kg)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

Mounting details

Position the Titusoft mechanism on the top of the drawer slide

Fix with 2 screws L=20mm

4. 4a

3a 4b

1. Rest the activator against the drawer front 2. Align the vertical position of the activator with the top of the Titusoft mechanism and mark the screw locations

Fix with 2 screws L=12mm

Further explanations > go to

http://www.youtube.com/watch?v=U3aS2r6KC6k

A trial mounting is always recommended. Please contact Titus Group or your local distributor for further technical assistance.

2.24

Soft Closing Systems

width (mm)

Titusoft FF

For wooden drawer with roller runners

Titusoft mechanism Activator

10.1 192 7

3.2

41.5

Titusoft mechanism

213

.7 Ø3

3. 5

Ø3

Activator

250 Pcs

2.25

Made of plastic

3.2

973-0M99 973-4451

> >

Bag of 1 973-0M99-380-K1

· · · · ·

Zinc plated blue

White

Item number

Technical details

Titusoft FF

Grey

Soft Closing System for Face Frame Cabinets with Wooden Drawer

380 380 350

300 Bags

1 Titusoft mechanisms 1 activators, grey 2 screws Ø3.5mm x 25mm 2 screws Ø3.5mm x 12mm 1 mounting instruction sheet

Capacity chart

路 Easy, intuitive mounting 路 Universal application will fit most standard drawers 路 Smooth soft closing action independent of drawer hardware 路 Non handed design

load (kg) 20

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

Mounting details

b a

Position the Titusoft on the top of a drawer slide

Screw the Titusoft mechanism to the face frame

Align the activator with the top of the Titusoft mechanism and fix with two screws

Fix with 2 (3) screws L=12mm

Further explanations > go to

http://www.youtube.com/watch?v=jQ8DiMIkxbg

A trial mounting is always recommended. Please contact Titus Group or your local distributor for further technical assistance.

2.26

Soft Closing Systems

width (mm)

Titusoft MD Soft Closing System for Metal Box

Titusoft MD

Titusoft mechanism for factory mounting

973-0X95

380

Titusoft mechanism for retrofit mounting

973-0X39

380

Activator

973-4125

Mounting jig

973-4126

Light blue

Item number

White

Grey

For metal boxes

309 350

Titusoft mechanism

3.2

Mounting jig 213

250 Pcs

Bag of 2 973-0X39-380-K1

60 Bags

· · · · ·

Made of plastic

1 Titusoft mechanism 1 activator 1 mounting jig 4 screws 1 mounting instruction sheet

2 Titusoft mechanisms 2 activators 1 mounting jig 8 screws 1 mounting instruction sheet

42.4

Activator

90 Bags

· · · · ·

40.5

3.2

Bag of 1 973-0X39-380-K2

Technical details Factory mounting (system holes)

225

3.2

42.4

6. 5 42.4

40.5

40.5 40.5

Ø4 213 192

213

3.2

Ø4

3.2

Retrofit mounting

213 225

4 42.4

40.5

Ø4

42.4

6. Ø 6.

40.5

2.27

213

192

40.5

213

3.2

Ø4

8 3.2

Ø4

225

192 213

Capacity chart

路 'One-for-all' soft closing for single skin metal boxes 路 Allows for easy factory mounting or retrofit application 路 Intuitive positioning 路 Preserve the life-time of the drawer

load (kg)

Mounting details Retrofit mounting

For retrofit mounting

For factory mounting

8.8

97.5

Factory mounting

Marked line

130

13.5

18.5

103.5

Further explanations > go to

192

http://www.youtube.com/watch?v=QpIq8uKGbng

A trial mounting is always recommended. Please contact Titus Group or your local distributor for further technical assistance.

2.28

Soft Closing Systems

width (mm)

Mount 1 or 2 Titusoft mechanisms depending on drawer weight and width

Titusoft SD100 Add-on Damper for Sliding Door

Grey

For top running sliding door systems

Item number

973-9018

Titusoft SD100

The system consists of the following components

380

Quantity for 2 door cabinet

Standard component

Titusoft SD100 mechanism

2 pcs

Customized components to suit the customer’s sliding door system

Base

4 pcs

Stopper

2 pcs

Activator for internal door

1 pc

Activator for external door

1 pc

Technical details

2263

192

A 35

Drilling details

160

Ø6.2

Accessories

Ø6.2

Screws Countersunk screw D4x40mm Countersunk screw D4x25mm Chipboard screw Ø4x16mm Euroscrew Ø6.3x15mm Mounting instructions

32 Sets

2.29

4 pcs 4 pcs 3 pcs 2 pcs 1 pc

· ‘ConfidentClose’ · Intuitive mounting · Non-handed design · Efficient damping on different door sizes · Smooth and controlled closing motion

Titusoft SD100s capacity

50kg

Soft Closing Systems

Up to 50kg per door

Mounting details Non-handed design

Mount Titusoft SD100 on top rail on both sides of the cabinet. Please follow mounting instructions included in a set.

Mounting positions

Titusoft SD100 mechanism position

* Activator for internal door position

* Activator for external door position

Click to engage

For furter inforation please contact your Titus Group representative.

2.30

Titusoft SD100s Add-on Damper for Sliding door

Item number Titusoft SD100s

973-9060 >

The system consists of the folowing components

Grey

For bottom running sliding door systems

380

Quantity for 2 door cabinet

Standard component

2 pcs

Titusoft SD100s mechanism

Customized components to suit the customer's sliding door system

Attachment base Technical details

Released position

185.1 10

21.3

Activator and attachments are custom made components > must be designed to suit customerâ€™s system 320

331

Loaded position

Drawings show example with components presented above

2.31

4 pcs

路 Non-handed design 路 Effortless door opening with low pull-out force 路 Efficient damping on different door sizes 路 Slim design for concealed application

Titusoft SD100s capacity

Up to 50kg per door

Mounting details Non-handed design

Mount Titusoft SD100s on top rail on both sides of the cabinet.

Mounting position

Titusoft SD100s is mounted into the top profile

Fit variuos U and double U shaped profiles

Space requirements

Slim design with 30mm height allows for concealed application

For further information please contact your Titus Group representative.

2.32

Soft Closing Systems

50kg

0.3

Concealed Hinges

0.4

Titus Hinges

0.5

‘ConfidentClose’ The hinge is designed to provide consumer preferred way of soft closing action. • Fast closing • Late start of deceleration action • Quiet landing with ‘SoftTouch’ Based on independent consumer researches.

‘One-for-All’ • Damping on the hinge cup • Damper, positioned transversal to the hinge cup allows for easy introduction of various hinge versions • Damped and non-damped version on one mounting plate platform

Adjustable Damping Flexibility to tune performance to wide range of applications • Consistent performance over a wide range of doors of different sizes and weights • Easy accessible button for intuitive and quick adjustment

Titus Damper Inside • Efficient damping at any closing speed • Reliable closing • Damping force consistency

0.6

A Comprehensive Range

T-type hinge Titus New Generation hinge for quick furniture assembly and consistent performance on wide range of doors '3Way' 'snap-on' mounting Highly tolerant Adjustable damping Low hinge cup depth

S-type hinge Simple and quick 'snap-on' mounting system Easy assembly and disassembly Adjustable damping 'ConfidentClose' Push to open for handleless furniture

B-type hinge Reliable 'slide-on' mounting system Simplicity in use Adjustable damping 'ConfidentClose' Reliable door closing

3.5

Door thickness

110° 120° 170°

15-26mm

Cranking

0mm 5mm 9mm 17mm angled

Door tab K

Mounting mode

Mounting plate type

Mounting plate height

Soft closing options

Durability (cycles)

Page

3-6mm

'3Way' snap-on

cruciform linear for face frame

0mm 1mm 2mm 3mm 4mm

Damping integrated in the hinge cup

100.000

3.27

80.000

3.71

80.000

3.119

Glissando add-on or stand-alone damping solutions

110° 170°

16-24mm

0mm 9mm 15mm angled

3-5mm

snap-on

cruciform for face frame

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup Glissando add-on or stand-alone damping solutions

110° 170°

16-24mm

0mm 9mm 15mm angled

3-5mm

slide-on

cruciform

0mm 1mm 2mm 3mm

Damping integrated in the hinge cup Glissando add-on or stand-alone damping solutions

3.6

Concealed Hinges

Opening angle

Concealed Hinges Product Guide

Cranking

Opening angle

Cup type

Page

0mm

110°

for wood door

3.29

5mm

110°

for wood door

3.29

9mm

110°

for wood door

3.31

17mm

110°

for wood door

3.31

T-type Glissando 120

0mm

120°

for wood door

3.33

T-type Glissando 110/15°

15°, 9mm

110°

for wood door

3.35

T-type Glissando 110/30°

30 °, 9mm

110°

for wood door

3.37

T-type Glissando 110/45°

45°, 9mm

110°

for wood door

3.39

45°, 17mm

110°

for wood door

3.41

T-type Glissando 110/90°

90 °, 17mm

110°

for wood door

3.43

T-type 110

0mm

110°

for wood door

3.45

5mm

110°

for wood door

3.45

9mm

110°

for wood door

3.47

17mm

110°

for wood door

3.47

T-type 120

0mm

120°

for wood door

3.49

T-type 110/15°

15°, 9mm

110°

for wood door

3.51

T-type 110/30°

30 °, 9mm

110°

for wood door

3.53

T-type 110/45°

45°, 9mm

110°

for wood door

3.55

45°, 17mm

110°

for wood door

3.57

T-type 110/90°

90 °, 17mm

110°

for wood door

3.59

T-type 170

0mm

170°

for wood door

3.61

5mm

170°

for wood door

3.61

9mm

170°

for wood door

3.63

for wooden door

3.65

T-type T-type Glissando 110

T-type for pie-cut corner cabinet T-type mounting plates

3.7

3.67

Opening angle

Cup type

Page

0mm

110°

for wood door

3.73

9mm

110°

for wood door

3.73

0mm

110°

for wood door

3.75

9mm

110°

for wood door

3.75

15mm

110°

for wood door

3.75

S-type-i 110/30º

30º, 9mm

110°

for wood door

3.77

S-type-i 110/45º

45º, 9mm

110°

for wood door

3.79

45º, 18mm

110°

for wood door

3.81

S-type-i 110/90º

90º, 18mm

110°

for wood door

3.83

S-type plus 110

0mm

110°

for wood door

3.85

9mm

110°

for wood door

3.85

0mm

110°

for wood door

3.87

9mm

110°

for wood door

3.87

0mm

110°

for wood door

3.89

9mm

110°

for wood door

3.89

15mm

110°

for wood door

3.89

S-type 110/-15º

-15º, 0mm

110°

for wood door

3.91

S-type 110/15º

15º, 0mm

110°

for wood door

3.93

S-type 110/24º

24º, 9mm

110°

for wood door

3.95

S-type 110/30º

30º, 9mm

110°

for wood door

3.97

S-type 110/45º

45º, 9mm

110°

for wood door

3.99

45º, 18mm

110°

for wood door

3.101

S-type 110/90º

90º, 18mm

110°

for wood door

3.103

S-type 110

0mm

110°

for aluminium frame door

3.105

S-type 170

0mm

165°

for wood door

3.107

9mm

165°

for wood door

3.109

for wood door

3.111

S-type S-type-i plus 110

S-type-i 110

S-type plus 110 Touch opening

S-type 110

S-type for pie-cut corner cabinet S-type mounting plates

3.113

3.8

Concealed Hinges

Cranking

Opening angle

Cup type

Page

0mm

110°

for wood door

3.121

9mm

110°

for wood door

3.121

15mm

110°

for wood door

3.121

B-type-i 110/30º

30°, 9mm

110°

for wood door

3.123

B-type-i 110/45º

45°, 9mm

110°

for wood door

3.125

45°, 18mm

110°

for wood door

3.127

B-type-i 110/90º

90°, 18mm

110°

for wood door

3.129

B-type 110

0mm

110°

for wood door

3.131

9mm

110°

for wood door

3.131

15mm

110°

for wood door

3.131

B-type 110/30º

30°, 9mm

110°

for wood door

3.133

B-type 110/45º

45°, 9mm

110°

for wood door

3.135

45°, 18mm

110°

for wood door

3.137

90°, 0mm

110°

for wood door

3.139

90°, 18mm

110°

for wood door

3.139

B-type 110

0mm

110°

B-type 110

0mm

110°

9mm

110°

15mm

110°

0mm

165°

for wood door

3.145

9mm

165°

for wood door

3.147

for wood door

3.149

for wood door

3.151

B-type B-type-i 110

B-type 110/90º

B-type 170

B-type for pie-cut corner cabinet B-type flap door hinge

0mm

90°

for aluminium frame door for aluminium frame door for aluminium frame door for aluminium frame door

B-type mounting plates Hinge Ø40

3.9

3.141 3.143 3.143 3.143

3.153 0mm

93°

for wood door

3.157

10mm

93°

for wood door

3.157

18mm

93°

for wood door

3.159

22mm

93°

for wood door

3.159

Opening angle

Cup type

Hinge Ø40 mounting plates

Page 3.161

Other Hinges Wide angle hinge and mounting plate

270°

for wood door

3.163

Refrigerator cabinet door hinge

110°

for wood door

3.165

Accessories Push latch

3.167

Cover caps

3.169

3.10

Concealed Hinges

Cranking

Concealed Hinges Door Overlay

How to Achieve the Desired Door Overlay? By choosing the hinge of appropriate cranking

Concealed hinges with specific hinge arms are available for different door overlays. The most common overlays are:

Cabinet side Door

1. Full overlay Use a hinge with 0mm cranking

2. Partial overlay for double doors Use a hinge with 5mm or 9mm cranking

3. Inset door Use a hinge with 15mm or 17mm cranking

By choosing the mounting plates of appropriate thickness

To achieve the desired overlay (x) while using a determined drilling distance (K), a mounting plate of appropriate

thickness (D) must be chosen from the enclosed table or calculated with given formula. x

K 4 5

x K

D=4+K-x

By choosing the appropriate drilling distance K

To achieve the desired door overlay (x) while using a determined mounting plate thickness (D), an appropriate drilling distance K must be chosen.

x K

1 2 3

3 3

0 D

3.11

Concealed Hinges

Through side adjustment

The side adjustment is made by rotating the appropriate screw on the hinge arm.

Adjustment range

Door clearance and gap

The door clearance (Fâ‰ĽFmin) and gap (Z) represent the minimal necessary space needed for the correct opening and closing of the door. The minimal required values depend on the cup drilling distance (K), door thickness (V)

and the type of hinge. The minimum clearance scale can be found on product pages > see Door clearance chart. When using hinges with partial overlay the door clearance must be twice as large (Fâ‰Ľ2Fmin).

16 17 18 19 20 21 22

3 0.3 0.5 0.7 1.0 1.3 1.7 2.5

Z K F

K 4 0.3 0.5 0.7 0.9 1.2 1.6 2.1

5 0.3 0.5 0.7 0.9 1.2 1.5 2.0 FMIN Gap ZMIN=0

3.12

Concealed Hinges Hinge Cup Types

How to Mount the Hinge on the Door? There are cup type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting

The hinge is fixed on the door with two screws. 3mm pilot holes recommended.

Easy-Fix time saving system

Quarter turn fixing for 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5).

90ยบ

Machine insertion ready hinge cup

Premounted dowels suitable for machine insertion into 8mm holes (interaxis 45/9.5) or 10mm holes (interaxis 48/6 and 52/5.5)

Pre-mounted expando dowels

Pre-mounted expanding dowels with triple-start screw for fast fixing, suitable for 8mm holes.

3.13

Pre-mounted euro screws for 5mm holes. Where not specified otherwise, euro screws are 13mm long.

inge cup with H pre-mounted Ă˜4.5mm screws

Pre-mounted chipboard screws. 3mm pilot holes recommended.

Aluminium frame screw-on hinge cup

The hinge is fixed onto a specific drilling on the aluminium frame.

Concealed Hinges

inge cup with H pre-mounted euro screws

3.14

Concealed Hinges Boring Details

Drilling Patterns for Hinge Cup Interaxis

Interaxis

45mm

48mm

52mm

· T-type · S-type · B-type

52 6

9.5

5.5

Interaxis 45mm, 48mm and 52mm*

*Available on special request > see page 0.3

Hinge cup type

Ø 35

Drilling pattern

9.5

Premounted expando dowels

5.5

9.5

Machine insertion ready

Premounted Ø4.5mm screws

Screw-on ready

5.5

Easy-fix system

9.5

Interaxis is the distance between two holes for fixing screws on the hinge cup.

3.15

Premounted euro screws

5.5

Concealed Hinges

Concealed Hinges Mounting Plate Type

How to Fix the Mounting Plate on the Cabinet Side? There are mounting plate type symbols listed on product pages beside item numbers. Below you can find their explanation.

No pre-mounting, chipboard screw ready

The mounting plate is fixed with two chipboard screws or equivalent. 3mm pilot holes recommended.

No pre-mounting, euro screw ready

Fixing with 6.3mm euro screws into pre-drilled 5mm holes. To choose appropriate head and length for use with this mounting plate is recommended.

Machine insertion ready

Pre-mounted dowels for machine insertion into 10mm holes.

Pre-mounted euro screws

Euro screws for 5mm holes are pre-mounted on the mounting plate. Available lengths: 11mm, 13mm and 15mm

Pre-mounted expanding dowels

Pre-mounted expanding dowels for 5mm holes. Available lengths: 7.5mm and 10.5mm

Pre-mounted Ă˜4.5mm screws

The mounting plate is fixed with two pre-mounted chipboard screws. 3mm pilot holes recommended.

3.16

Concealed Hinges Hinge-to-plate Mounting

How to Assemble the Hinge and the Mounting Plate? T-type ‘3Way’ ‘snap-on’

‘3Way’ ‘snap-on’ mounting for intuitive hinge-to-plate assembly in three directions:

front assembly

rear assembly

top assembly

disassembly: for disassembly press rear button on the hinge arm.

3.17

- from the hinge arm front - from the hinge arm rear - from the top

The door is assembled on the cabinet side simply by positioning the two hooks under the hinge arm on the outer part of the mounting plate and pressing gently on the rear part of the hinge arm.

For disassembly press the rear button on the hinge arm.

assembly

disassembly

B-type slide-on

The hinge is assembled by sliding the hinge arm over the mounting plate. The hinge adjustment screw must fit into the groove on the mounting plate.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

Key-hole

The hinge is assembled on the mounting plate by inserting the fixing screw on the appropriate hole on the hinge arm.

After adjusting the door depth, the mounting procedure is finished by tightening the fixing screw.

· Wide angle hinge · Refrigerator cabinet door hinge

3.18

Concealed Hinges

S-type ‘snap-on’

Concealed Hinges Loadings

Use the appropriate number of hinges so that the door height or weight does not exceed that shown below.

How Many Hinges per Door? Check the enclosed specifications for the number of required hinges per door by considering door height and weight.

Concealed hinges with Ø 35mm hinge cup diameter Standard hinges

height (cm)

250

200

150

50 weight (kg)

50 8-15 13-20 17-25

S-type B-type

Hinges with integrated damping

height (cm)

250

5 4

150

100

weight (kg)

2 4-7

8-12 13-16 17-22

T-type

200

2 2-8

8-15 13-20 17-25

Hinges with integrated damping can be combined with non-damped hinges from standard hinge range. A trial mounting is always recommended.

200

150

100 50

S-type-i B-type-i

3.19

weight (kg)

height (cm)

100

2 2-8

150

100

200

weight (kg)

2 4-7

8-12 13-16 17-22

· T-type Glissando

Adjustment range can be found on the product pages.

Concealed Hinges

Concealed Hinges Adjustment

Side Adjustment The side adjustment aligns the door with the side of the cabinet.

By rotating the adjustment screw

The side adjustment is made by rotating the screw on the hinge arm.

T-type S-type B-type

Adjustment range

By temporarily loosening the fixing screw · Wide angle hinge 270° · Refrigerator cabinet hinge

For the side adjustment: 1. Release the fixing screw 2. M ake the necessary adjustment by rotating the appropriate screw 3. Tighten the fixing screw Without releasing the fixing screw no side adjustment is possible.

Adjustment range

3.20

Concealed Hinges Adjustment

Height Adjustment

-2 -2

-2 +2 +2 -2

+2 +2

T-type with cam adjustable cruciform mounting plate

The height adjustment is made by rotating the cam adjuster on the mounting plate.

-2 -2

By rotating the cam adjuster

-2 -2

Height adjustment is necessary to achieve optimal vertical door position.

-2

S-type with cam adjustable cruciform mounting plate

+2 +2

T-type with cam adjustable horizontal mounting plate

3.21

Concealed Hinges +2

· T-type and S-type with cruciform mounting plate · B-type · Wide angle hinge

For height adjustment the two mounting plate fixing screws have to be temporarily released while making the manual adjustment.

-2

By releasing the screw slot

3.22

Concealed Hinges Adjustment

Depth Adjustment The system enables easy adjustment of the gap between door and cabinet.

By rotating the cam adjuster

Rotate the cam adjuster on the hinge arm.

+4/-1 +4/-1

· T-type

-2 -2

+-/1.5

+2 +2

· S-type plus

By releasing the fixing or adjustment screw · S-type · B-type

The depth adjustment is made by temporarily releasing the adjustment screw (S-type) or fixing screw (B-type, Hinge Ø40). After the adjustment is made the screw has to be re-tightened.

Adjustment range

3.23 +/-1.5+/-1.5

Most of Titus hinges can be combined with soft closing devices. > see pages 2.15-2.21 for details

Concealed Hinges

Titus recommends!

Door Closing Type There are two door closing systems:

Concealed hinges with self-closing angle · T-type · S-type · B-type

Free-swinging door hinges* · all series

self - closing free - swinging

The self-closing angle is the point from which the door will close by itself, without user assistance. The mechanism starts closing the door from a 14° to 25° angle, depending on the concealed hinge type. From that point to the maximum opening angle the door remains in an open position.

Optionally most of Titus concealed hinges can be supplied without selfclosing mechanism. These hinges may be ordered upon request. Soft closing devices can not be used with freeswinging door hinges. * Available upon special request > see page 3.9

3.24

Concealed Hinges Adjustment

Damping Adjustment Adjustment of the damping force action can or beto adjusted to the damping T-type Glissando To decrease increase ST-i ‘snap-on’ hinges The damping fit different door weights and sizes which

force, change to position of the Basic-i ‘slide-on’ hingesenables perfect door functioning.

damping reduction switch. The damping force is factory pre-set to the maximum damping value.

Adjustment of the damping force ST-i ‘snap-on’ hinges Basic-i ‘slide-on’ hinges

The damping reduction switch in a pre-set position

To decrease or to increase the damping force, change to position of the damping reduction switch. The damping force is factory pre-set to the maximum damping value.

Damping is factory pre-set to the medium damping value. Turn towards ‘+’ to increase and ‘-’ to decrease the damping.

To decrease the damping force 1. Lift the damping activator. 2. Slide the damping reduction switch to opThe damping positereduction position. switch in a pre-set To decrease or to increase the damping, position

S-type-i plus series S-type-i series B-type-i series

change the position of the damping 2 1 reduction switch. Hinges are factory pre-set to the maximum damping value.

To increase the damping force, slide the damping reduction switch back to the factory pre-set To decrease the damping forceposition. 1. Lift the damping activator. 2. Slide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of2 damping.1 Example shows the damping force change in case of To increase the damping force, slide the damptwo hinges on door. ing reduction switch back to the factory pre-set

Damping force change

position.

Damping force change

The damping reduction switch in a pre-set position.

To increase damping, Hingethe set at the maximum damping value slide the damping reduction switch to lowest damping value Hinge set back at the the factory pre-set position.

To decrease the damping 1. L ift the damping activator. 2. S lide the damping reduction switch to opposite position.

The damping reduction switch adjusts the force of damping. Damping force change Example shows the damping force change in case of The damping reduction switch adjusts the damping. Example two hinges on door. shows the damping change in case of two hinges on door.

Hinge set at the maximum damping value Hinge set at the lowest damping value

Hinge set at the maximum damping value Hinge set at the lowest damping value 100% 100%

3.25

85%

70%

damping force

85%

70%

damping force

Concealed Hinges

Titus damping solutions Key Design Choices ‘ConfidentClose’ The hinge is designed to provide consumer preferred way of soft closing action.

Key design choices

Based on results Titushinge researches made in Damping in ofthe cup UK, Germany and Slovenia

Damper is positioned transversal on the hinge cup Fast closing

'One-for-all' efficiency principle

Late start of

· Allows for an easy and quick introduction deceleration action of various hinge versions: ST ‘snap-on’ and Basic ‘slide-on’ with different hinge arm crankings and angles · Standard hinge cup drilling depths: requires no changes in drillings for hinge Damping on the hinge cup cup Damper, positioned transversal to the hinge · Standard mounting plates cup allows for easy introduction of various hinge versions

Quiet landing with ‘SoftTouch’

Damped and non-damped version on one mounting plate platform

Adjustable damping force

Adjustable damping

Flexibility to 'tune' performance for all applications · Optimal damping on various door Flexibility to tune weights and sizesperformance for all applications · Intuitive and quick adjustment · Easily accessible adjustment button · Consistent performance over a wide range of doors of different sizes and weights · Easy accessible adjustment button for intuitive and quick adjustment Adjustable damping zone and force Adjustable damping zone and

Titus Damper Inside

· Efficient damping at any closing speed · Reliable closing · Damping force consistency

Titus hydraulic damper

Titus hydraulic damper, designed and produced in-house

force

· Reliable and consistent life-long damping · Minimum damper rebounce · Dampers’ consistency over high volume production runs assured

3.26

T-type Hinges ‘3Way’ snap-on · ·

Allows for intuitive hinge-to-plate mounting in three directions Enhanced mounting experience

Easy door installation even in cases of 4-5 hinges per door Easy door installation

even in cases of 4-5 hinges per door · Easy and quick assembly and disassembly · Flexibility for the furniture user · Tight hinge-to-plate joint improves hinge stability and reduces door sag

Highly tolerant

Rigidity

Efficient performance in marginal values Highly tolerant of tolerances

·· Efficient Reliableperformance door closing in of in case marginal accidental misalignment values of tolerances · ‘ConfidentClose’ assured

· Reliable door closing in case of accidental misalignment · ‘ConfidentClose’ assured

Hinge-to-plate attachment assures Rigidity stability and rigidity Smooth performance

· Hinge-to-plate attachment assures stability and rigidity · Smooth performance

Concealed Hinges

T-Type Hinges

Low hinge cup drilling depth Enables application on door thicknesses Adjustable damping from 15mm on

· Consistent performance on doors of different dimensions and weights · Intuitive adjustment procedure

‘Titus Damper Inside’ · Titus Damper proprietary multi-purpose ‘Titus Inside’ damping technology · Reliable and consistent · Titus proprietary multi-purpose life-long damping technology ·damping No rebounce

· Reliable and consistent life-long damping

Proven Glissando concept · ·

Damper is positioned Proven Glissando transversal on the hinge cup Reliable performance

concept

· Damper is positioned transversal on the hinge cup · Reliable performance

T-type Glissando 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0AT0-054 701-0AS0-054 11.7 11.4

0mm K

701-0AT1-054 701-0AS1-054 EasyFix

701-0AT4-054 701-0AS4-054

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

150 Pcs

Made of steel

Cranking

701-0BT0-054 701-0BS0-054 11.7 11.4

5mm

701-0BT1-054 701-0BS1-054 EasyFix

42.5

701-0BT4-054 701-0BS4-054

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.29

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +4/1mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting plate drilling distance

Mounting details

67.5

18.5 S

Mounting plate thickness table For further explanation > see page 3.11

K 5

F>Fmin X 10.6

D=13+K-x Drawing show application on D=0mm thick mounting plate

67.5

K 15.6

5 F>Fmin

X V

F>Fmin X 15.6

67.5

23.5

D=8+K-x

Drawing show application on D=0mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.30

T-type Glissando 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0CT0-054 701-0CS0-054 11.7 11.4

9mm K

701-0CT1-054 701-0CS1-054 EasyFix

701-0CT4-054 701-0CS4-054

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

150 Pcs

Made of steel

Cranking

701-0DT0-054 701-0DS0-054 11.7 11.4

17mm

701-0DT1-054 701-0DS1-054 EasyFix

42.5

701-0DT4-054 701-0DS4-054

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.31

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +4/-1mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting plate drilling distance

Mounting details D

Z 37

67.5

27.5 27.5

Mounting plate thickness table For further explanation > see page 3.11

K 5

F>2Fmin F>2Fmin

19.6

D=4+K-x

V V

Drawing show application on D=0mm thick mounting plate

68.6

37.5 37.5

37+V

F>Fmin F>Fmin

D= -4+K+F

29.6

V V

Drawing show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.32

T-type Glissando 120

For wood doors

· · · ·

120°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

120˚ 35mm 11.9mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0UT0-054 701-0US0-054 11.9 11.4

0mm K

701-0UT1-054 701-0US1-054 EasyFix

701-0UT4-054 701-0US4-054

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

150 Pcs

Made of steel

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.33

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate thickness table For further explanation > see page 3.11

67.5

18.5 S

Mounting plate drilling distance

F>Fmin X 10.1

K 37

5 6

D=13+K-x Drawing show application on D=0mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 3.12

1.1

0.4

1.4

0.7

0.1

2.3

1.6

FMIN

Gap Zmin =2

3.34

T-type Glissando 110/15°

15° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0D64-650 701-0D66-650 11.7 11.4

9mm K

701-0D70-650 701-0D72-650 EasyFix

701-0D76-650 701-0D78-650

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.35

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting 27 details D D27 27 D D

S S

P 3

37 37

67.6 67.6

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

15° 15°

15°

V V

14.2

15°

14.2

Drawings show application on D=0mm thick mounting plate S

27 27 27

D27 D

L L

15° K

V V

14.2

Drawings show application on 14.2 D=0mm thick mounting plate

15°

14.2

15°

71.6 71.6

15°

14.2

P x P

L=45 for thickness D=0 L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.36

T-type Glissando 110/30°

30° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.7 11.4

9mm K

EasyFix

9.5

Ø 35

Item number

701-0E52-650

701-0E54-650

701-0E58-650

701-0E60-650

701-0E64-650

701-0E66-650

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.37

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

701-0957-054-00

701-0957-054-00 701-0957-054-00 Mounting Hinge T110 ID SO Hinge T110 ID 30° C9 45-9.5 SO Hinge30° T110 30° ID C9 C9 45-9.5 45-9.5 SO details 701-0957-054-00 32.1 32.1 Hinge T110 30° ID C9 45-9.5 SO 32.1 S S S D D

32.1

2.5

3.5

4.5

5.5

4 5

30° 30°

30°

6.5

7.5

8.5

V V

14.5 14.5

P P

14.5

30°

14.5

1.5

67.6

37 37

67.6 67.6

67.6

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

Drawing show application Drawing show application Drawing show application Drawing show application on D=0mm thick mounting plate Drawings show application on D=0mm thick mounting plate on D=0mm thick mounting plate on D=0mm thick mounting plate

on D=0mm thick mounting plate 32 32 32 32 D D

S S

D D

L x

30° 30°

30° V

14.5

K 30°

14.5

71.6

71.6 71.6

71.6

14.5 14.5

Drawings show application on D=0mm thick mounting plate Drawing show application on D=0mm thick mounting plate

Drawing show Drawing show application Drawing show application application on thick on D=0mm thick mounting plate plate on D=0mm D=0mm thick mounting mounting plate

P P

L=41 for thickness D=0 L=41 D=0 L=41for forthickness thickness D=1 L=41 D=1 L=40for forthickness thickness D=2 L=41 for thickness L=41 for thickness D=0 D=0 L=41 for thickness D=0 L=40 for thickness D=2 L=40 forL=41 thickness D=3 for thickness L=40 for thickness D=3 L=41 for thickness D=1 D=1 L=41 for thickness D=1 L=39 for thickness D=4 L=40 for thickness L=39 forfor thickness L=40 thickness D=2 D=2 L=40 for D=4 thickness D=2

L=40 for L=40 for thickness D=3 D=3 L=40 for thickness thickness D=3 L=39 for L=39 for thickness D=4 D=4 L=39 for thickness thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.38

T-type Glissando 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0D82-650 701-0D84-650 11.7 11.4

9mm K

701-0D88-650 701-0D90-650 EasyFix

701-0D98-650

701-0E32-650

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.39

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

701-0933-054-00 701-0933-054-00 Hinge T110 45° ID C9 45-9.5 SO Hinge T110 45° ID C9 45-9.5 SO Mounting 701-0933-054-00 701-0933-054-00 25.1 details Hinge ID 45° C9 45-9.5 SO S SO 25.1 T110 Hinge45° T110 ID C9 45-9.5 D 25.1 D

7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 4

K P

3.7

45°

3.7

45°

3.7

45° 3.7

67.6

67.6 67.6

25.1

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

Drawings show application on D=0mm thick mounting plate 25.1 25.1

25.1 D

25.1

4 L

K P

Drawing show application D=0mm thick mounting plate Drawing show application on D=0mm thick mounting plate on D=0mm thick mounting plate Drawing show application Drawing show application on D=0mm thick mounting plate plate on D=0mm thick mounting

P V

3.7 3.7 show application on Drawings

45°

3.7

45° V

3.7

45°

P P

45°

79.6

79.6 79.6

S D

L=49 for thickness D=0 L=48 for thickness D=1 L=47 for thickness D=2 L=46 for thickness D=3 L=45 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.40

T-type Glissando 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

701-0B08-650 701-0B10-650 11.7 11.4

17mm K

701-0C78-650 701-0C80-650 EasyFix

701-0C54-650 701-0C56-650

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.41

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

31.7

67.6

1.5

3 4

0.5

2.5

3.5

0 1

K 3

45ยบ

12.5

Drawings show application on D=0mm thick mounting plate

31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 2

75.6

K K V

12.5

Drawings show application on D=0mm thick mounting plate

45ยบ P

L=45 for thickness D=0 L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.42

T-type Glissando 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

11.7 11.4

17mm K

9.5

Ø 35

Item number

701-0A96-650

701-0A98-650

701-0D36-650 701-0D38-650 EasyFix

701-0D30-650 701-0D32-650

42.5

Drilling patterns for hinge cups > see page 3.15

65.4

26.1

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.43

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +2.5/-2.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

52 21

F 21.5

Drawings show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.44

T-type 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0AK0-054 702-0AL0-054 11.7 3.2

0mm K

702-0AK1-054 702-0AL1-054 EasyFix

702-0AK4-054 702-0AL4-054

37.4

62.1

Drilling patterns for hinge cups > see page 3.15

150 Pcs

Made of steel

Cranking

702-0BK0-054 702-0BL0-054 11.7 3.2

5mm

702-0BK1-054 702-0BL1-054 EasyFix

37.4

702-0BK4-054 702-0BL4-054

62.1

Drilling patterns for hinge cups > see page 3.15

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Cover caps for hinge arm > see page 3.169

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.45

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

Mounting details 18.5

Mounting plate thickness table For further explanation > see page 3.11

67.5

37 F>Fmin F>Fmin 10.6

D=13+K-x

Drawing show application on D=0mm thick mounting plate

23.5

67.5

6 X V V

D=8+K-x

15.6

Drawing show application on D=0mm thick mounting plate

Soft closing systems Glissando TT > see page 2.15

Door clearance at R=1mm For further explanation > see page 3.12

Glissando CR > see page 2.21

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.46

T-type 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0CK0-054 702-0CL0-054 11.7 3.2

9mm

702-0CK1-054 702-0CL1-054 EasyFix

37.4

702-0CK4-054 702-0CL4-054

62.1

Drilling patterns for hinge cups > see page 3.15

150 Pcs

Made of steel

Cranking

702-0DK0-054 702-0DL0-054 11.7 3.2

17mm K

702-0DK1-054 702-0DL1-054 EasyFix

702-0DK4-054 702-0DL4-054

37.4

62.1

Drilling patterns for hinge cups > see page 3.15

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Cover caps for hinge arm > see page 3.169

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.47

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

Mounting details 27.5

Mounting plate thickness table For further explanation > see page 3.11

S 27.5

67.5

K 5

F>2Fmin

.6 19.6

F>2Fmin

X X

D=4+K-x

Drawing show application on D=0mm thick mounting plate

D 37.5

S D

68.6

37.5

37+V F>Fmin 29.6

D=-4+K+F

V V

F>Fmin

Drawing show application on D=2mm thick mounting plate

Soft closing systems Glissando TT > see page 2.15

Door clearance at R=1mm For further explanation > see page 3.12

Glissando CR > see page 2.21

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.48

T-type 120

For wood doors

· · · ·

120°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

120˚ 35mm 11.9mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0UK0-054 702-0UL0-054 11.9 3.2

0mm

702-0UK1-054 702-0UL1-054 EasyFix

37.4

702-0UK4-054 702-0UL4-054

62.1

Drilling patterns for hinge cups > see page 3.15

150 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Cover caps for hinge arm > see page 3.169

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.49

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

Mounting details

18.5

Mounting plate thickness table For further explanation > see page 3.11

67.5

F>Fmin F>Fmin 10.1

D=13+K-x

Drawing show application on D=0mm thick mounting plate

Soft closing systems Glissando TT > see page 2.15

Door clearance at R=1mm For further explanation > see page 3.12

Glissando CR > see page 2.21

1.1

0.4

1.4

0.7

0.1

2.3

1.6

FMIN

Gap Zmin =2

3.50

T-type 110/15°

15° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0D63-650 702-0D65-650 11.7 3.2

9mm

702-0D69-650 702-0D71-650 EasyFix

37.4

702-0D75-650 702-0D77-650

62.1

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.51

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting 24 24 details

D 24 D

S S

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

37 37

67.6

67.667.6

15° 15°

15°

4 15°

V V V

K V

14.2 14.2

P P

14.2 14.2

Drawings show application on D=0mm thick mounting plate

D 27 D

15°

70.6

70.670.6

V V V

14.2 14.2

Drawings show application on 14.2 D=0mm thick mounting plate 14.2

Soft closing systems Glissando TT > see page 2.15

P P

K K x x K x K x

5 6

L=40 for thickness D=0 L=40 for thickness D=1 L=39 for thickness D=2 L=39 for thickness D=3 L=38 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.52

T-type 110/30°

30° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.7 3.2

9mm

EasyFix K

37.4

9.5

Ø 35

Item number

702-0E51-650

702-0E53-650

702-0E57-650

702-0E59-650

702-0E63-650

702-0E65-650

62.1

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.53

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

701-0956-054-00 701-0956-054-00 HingeHinge T110 30° SD C9SD 45-9.5 SO SO T110 30° C9 45-9.5 31.8

31.8

701-0956-054-00 S S D 701-0956-054-00 D Mounting HingeHinge T110 30° SD C9SD 45-9.5 SO SO T110 30° C9 45-9.5 details

D 37

67.6

3 30°

4.5

5.5

6.5

7.5

8.5

30°

3.5

K 14.5

2.5

14.5 30°

1.5

30°

14.5

Mounting plate thickness table For further explanation > see page 3.11

31.8

67.6

31.8

Mounting plate drilling distance

14.5

Drawing show application Drawing show application

Drawings show application on D=0mm thick mounting plate

Drawing show application Drawing show application

71.6

30°

14.5

K V

Drawings show application on D=0mm thick mounting plate

Soft closing systems

30°

14.5

71.6

30°

14.5

K L

14.5

71.6

3 D

K x L=41 xfor thickness D=0 L=41 for thickness D=1 L=40 for thickness D=2 L=40 for thickness D=3 L=39 for thickness D=4

on D=0mm thick mounting plate plate on D=0mm thick mounting

Door clearance at R=1mm For further explanation > see page 3.12

L=41 for thickness D=0 D=0 L=41 for thickness D=1 V for thickness 16 L=40 for thickness D=2 17 L=40 D=2 18 L=40 for thickness D=3 L=40 for thickness D=3 L=41 for D=0 0.7 L=41 for3thickness thickness D=0 0.8 L=39 thickness D=4 L=39 for D=4 0.5 L=41 for thickness D=1 D=1 L=41 for thickness L=40 for thickness D=2 D=2 L=40 for thickness 0.4 L=40 for thickness D=3 0.7 L=40 for4thickness D=3 0.8 Kfor thickness L=39 for thickness D=4 D=4 L=39 5 0.4 0.6 0.7

Glissando TT L=41 for thickness D=1 L=41 for thickness on2.15 D=0mm thick mounting plate on D=0mm thick mounting plate > see page

Drawing show show application Drawing application on D=0mm thick mounting plate plate on D=0mm thick mounting Drawing show show application Drawing application on D=0mm thick mounting plate plate on D=0mm thick mounting

0.4

0.6

0.7

1.2

1.5

1.7

2.1

2.8

4.1

5.5

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.54

T-type 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0D81-650 702-0D83-650 11.7 3.2

9mm

702-0D87-650 702-0D89-650 EasyFix

37.4

702-0D97-650

702-0E18-650

62.1

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.55

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

701-0932-054-00 Hinge T110 45° SD C9 45-9.5 SO 701-0932-054-00 701-0932-054-00 Hinge 45°C9 SD45-9.5 C9 45-9.5 Hinge T110T110 45° SD SO SO 701-0932-054-00 Hinge T110 45° SD C9 45-9.5 SO Mounting details 25

25 25 D D

Mounting plate thickness table For further explanation > see page 3.11

V V

45°

5 37

3.7

45°

3.7

37 37

67.6

67.667.6

4 45° 45°

3.7

7 7.5 8 8.5 9 9.5 10 10.5 11 11.5 12 12.5 13 13.5 3

67.6

Mounting plate drilling distance

P application Drawing show on D=0 tick mounting plate Drawing application Drawing application Drawings show application on showshow on tick D=0 tickapplication mounting on D=0 mounting plate plate D=0mm thick mounting plate Drawing show

3.7

on D=0 tick mountingS plate

25 25 25 D D

K V

3.7

Drawing show application show application on 3.7Drawings on D=0 tick mounting plate plate D=0mm thick mounting Drawing show application Drawing show application on D=0 tickapplication mounting on D=0 tick mounting plateplate Drawing show on D=0 tick mounting plate Soft closing systems Glissando TT > see page 2.15

x V

3.7

K 5

45°

x Kx K

L L

45° 45° 45°

3.7

79.6

79.679.6

79.6

L=49 for thickness D=0 L=49 for thickness D=0 L=48 for D=1 forthickness thickness L=48 for thickness D=1 L=49L=49 for thickness D=0 D=0 L=47 for thickness D=2 L=47 for thickness D=2 L=48 for thickness D=1 L=48 for thickness D=1 L=49 for thickness D=0 L=46 for thickness D=3 L=46 for thickness D=3 L=47 for thickness D=2 L=47 for thickness D=2 L=48 forfor thickness D=1 L=45 for thickness D=4 L=45 thickness D=4 L=46 for thickness L=46 for D=3 L=47 forthickness thickness D=2D=3 L=45 for thickness D=4 L=45 L=46for forthickness thicknessD=4 D=3 L=45 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.56

T-type 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

702-0B07-650 702-0B09-650 11.7 3.2

17mm

702-0C77-650 702-0C79-650 EasyFix

37.4

702-0C53-650 702-0C55-650

62.1

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.57

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

31.7

Mounting plate thickness table For further explanation > see page 3.11

67.6

1.5

3 4

0.5

2.5

3.5

0 1

K 3

45ยบ 37

12.5

Drawings show application on D=0mm thick mounting plate

31.7

0 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 2

75.6

K 45ยบ V

12.5

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TT > see page 2.15

L=45 for thickness D=0 L=44 for thickness D=1 L=43 for thickness D=2 L=42 for thickness D=3 L=41 for thickness D=4

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.58

T-type 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 11.7 3.2

17mm

Ø 35

Item number

702-0A95-650

702-0A97-650

702-0D35-650 702-0D37-650 EasyFix

9.5

37.4

702-0D29-650 702-0D31-650

62.1

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.59

Hinge cup screws If not pre-mounted

4 16

Legend of hinge cup symbols

820-6328-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

52 21

Drawings show application on D=2mm thick mounting plate

Soft closing systems Glissando TT > see page 2.15

21.5

Drawings show application on D=2mm thick mounting plate

Door clearance at R=1mm For further explanation > see page 3.12

0.5

0.7

0.8

1.2

1.5

1.7

2.1

2.8

4.1

5.5

0.4

0.7

0.8

1.2

1.5

1.7

2.1

2.3

3.1

4.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

3.5

0.4

0.6

0.7

0.9

1.1

1.4

1.6

2.2

2.6

2.9

FMIN

Gap ZMIN=0

3.60

T-type 170

For wood doors

· · · ·

170°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

165˚ 35mm 12mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Cup type

Cranking

9.5

Ø 35

Item number

702-0EK0-054 702-0EL0-054

0mm

702-0EK1-054 702-0EL1-054 EasyFix

702-0EK4-054 702-0EL4-054

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Cranking

5mm EasyFix

702-0FK0-054

702-0FL0-054

702-0FK1-054

702-0FL1-054

702-0FK4-054

702-0FL4-054

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.61

Hinge cup screws If not pre-mounted

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance 52

Mounting plate thickness table For further explanation > see page 3.11

F>Fmin

37 7

-1.4

Drawings show application on D=0mm mounting plate In 90°position the door is only 1.4mm distant from side panel

D=13+K-x

F>Fmin

˚ 3.6

D=8+K-x

Drawings show application on D=0mm mounting plate

Soft closing systems Glissando TL 170 > see page 2.17

Door clearance at R=1mm For further explanation > see page 3.12

Glissando CR > see page 2.21

0.0

2.6

0.0

5.1

FMIN

Gap ZMIN=0.5

3.62

T-type 170

For wood doors

· · · ·

170°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

165˚ 35mm 12mm ‘3Way’ snap-on

Interaxis

45mm

48mm 48

Cup type

Cranking

9.5

Ø 35

Item number

702-0GK0-054 702-0GL0-054

9mm

702-0GK1-054 702-0GL1-054 EasyFix

702-0GK4-054 702-0GL4-054

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Mounting plates Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.63

Hinge cup screws If not pre-mounted

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-1mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

61 61 S D D

Drawings show application on D=0mm thick mounting plate

79 S

S S

10 11

0 37

7.6 7.6

Glissando TL 170 > see page 2.17

67 V

67 V V

7.6

Soft closing systems

5 79 6

Drawings show application on D=0mm thick mounting plate

F>2Fmin F>2Fmin

F>Fmin F>Fmin

70 S

F>2Fmin V

F>Fmin

C C

170 2

67 19

x K

61 19 D D

Mounting plate thickness table For further explanation > see page 3.11

Mounting details

D=4+K-x

Door clearance at R=1mm For further explanation > see page 3.12

Glissando CR > see page 2.21

0.0

2.6

0.0

5.1

FMIN

Gap ZMIN=0.5

3.64

T-type for Pie-cut Corner Cabinet

For wood doors

· · · ·

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.7mm '3Way' snap-on

Interaxis

45mm

48mm 48

Cup type

Corner cabinet

9.5

Ø 35

Item number

721-0PK0-650 721-0PL0-650 721-0PK1-650 721-0PL1-650 EasyFix

721-0PK4-650 721-0PL4-650

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable cruciform mounting plate > see page 3.67

7.5

Cruciform mounting plate > see page 3.69

Accessories

Legend of hinge cup symbols

820-6328-050

10000 Pcs

Cover caps for hinge arm > see page 3.169

Cam adjustable horizontal mounting plate > see page 3.67 Face frame adapter plate > see page 3.69

3.65

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +2.5/-2.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Adjustments +3

-1 +2.5

-6

-2.5

V = 16 - 22 mm = 3 - 5 mm

V=16-22mm K K=3-5

D=2

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing

Any T-type-i mounting plate of thickness D=0 can be used

-2 11.5 +3 70Â° -1 +5

-1.5

D=3

3.66

T-type Mounting Plates

â€˜3Wayâ€™ snap-on mounting

Drilling pattern

Dimensions

Cam adjustable cruciform mounting plate 37mm 57.2

150 Pcs

Made of steel

Cam adjustable horizontal mounting plate 65.2

32 19.9

150 Pcs

3.67

Made of steel and zinc

Height adjustment +2/-2mm

10.5

Concealed Hinges

Mounting plate type

Mounting plate thickness

14.5

no pre-drilling required

min 14.5

Mounting plate thickness (D)

min 15

Item number

0mm

700-0KC0-054 700-0KB0-054 700-0KF0-054 700-0KA0-054

1mm

700-0KC1-054 700-0KB1-054 700-0KF1-054 11.5 700-0KA1-054

700-0KE1-054

2mm

700-0KC2-054 700-0KB2-054 700-0KF2-054 700-0KA2-054

700-0KE2-054

3mm

700-0KC3-054 700-0KB3-054 700-0KF3-054 700-0KA3-054

700-0KE3-054

4mm

700-0KC4-054 700-0KB4-054 700-0KF4-054 700-0KA4-054 700- 0KE4-054

0mm

700-0LC0-650 700-0LB0-650

700-0LF0-650

2mm

700-0LC2-650 700-0LB2-650

700-0LF2-650

3mm

700-0LC3-650 700-0LB3-650

700-0LF3-650

min 11.5

Ø5

min 10.5

Ø10

Item number

Ø5

Item number

Ø3

Item number

Ø5

min

min 11.5

min 10.5

700-0KE0-054

min 15

Legend of mounting plate type symbols

15 Pre-mounted 15mm euro screws

Ø5

10.5 Machine insertion ready

Pre-mounted 10.5mm expanding dowels

15 Premounted chipboard screw

14.5

min 15 min 11.5

min 10.5

Premounted chipboard screw

Ø5

min 11.5

min 10.5

3.68

T-type Mounting Plates

‘3Way’ snap-on mounting

Drilling pattern

Dimensions

Cruciform mounting plate 37mm

57.2

150 Pcs

Made of steel

Face frame mounting plate

Ø3

150 Pcs

Made of steel and zinc

Fixing screw for cruciform mounting plate If not pre-mounted

7.5

4 16

Chipboard screws

820-6328-050 10000 Pcs

3.69

56.8

9.5

Mounting plate type

Height adjustment +2/-2mm

10.5

14.5

min 14.5

min 10.5

min 11.5

Mounting plate thickness (D)

min 11.5

Item number

0mm

700-0NA0-054

700-0NC0-054

700-0NB0-054

700-0NF0-054

700-0NE0-054

1mm

700-0NA1-054

700-0NC1-054

700-0NB1-054

700-0NF1-054

700-0NE1-054

2mm

700-0NA2-054

700-0NC2-054

700-0NB2-054

700-0NF2-054

700-0NE2-054

3mm

700-0NA3-054

700-0NC3-054

700-0NB3-054

700-0NF3-054

700-0NE3-054

4mm

700-0NA4-054

700-0NC4-054

700-0NB4-054

700-0NF4-054

700-0NE4-054

3.9

Ø5

Ø10

Concealed Hinges

Mounting plate thickness

Ø5

Ø3 Item number

0mm

700-0KW0-054

3mm

700-0KW3-054

Legend of mounting plate type symbols

15 Screw-on ready for chipboard screws < screws

Pre-mounted 15mm euro screws

10.5 Machine insertion ready

Pre-mounted 10.5mm expanding dowels

15 Premounted chipboard screw

14.5 Premounted chipboard screw

3.70

S-type Hinges

‘Snap-on’ mounting system · Easy and quick assembly and disassembly · Flexibility for the furniture user · Tight hinge-to-plate joint improves hinge stability and reduces door sag

Easily accesible height adjustment with cam · Intuitive and quick height adjustment · Consumer friendly

‘ConﬁdentClose’ · 1 Fast closing · 2 Late start of deceleration action · 3 Quiet landing with ‘SoftTouch’

Concealed Hinges

Soft closing options

Adjustable damping

Touch opening

· Hinge integrated · Add-on with Glissando ready hinge cup · Stand-alone

· Adjustable damping assures perfect functioning on every door

· Guarantees effortless opening · Elegant cabinet design · Doors without handles

S-type-i Plus 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

Ø 35

Item number

954-0228-050

954-0229-050

Drilling patterns for hinge cups > see page 3.15

0mm

9.5

43.5

31.5 43.5

62.8

31.5

200 Pcs

Made of steel and plastic

Cranking

954-0E16-050 12

9mm K

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.73

954-0E17-050

Screw-on ready < screws

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +1.5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

17.8

3 4 5

F>Fmin

D=13+K-x

Drawings show application on D=0mm thick mounting plate

26.7 D

x 16

F>2Fmin

D=4+K-x

Drawings show application on D=0mm thick mounting plate

Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.74

S-type-i 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details 12

Cranking

Cup type

0mm

9.5

Ø 35

Item number

954-0226-050

954-0227-050

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

954-0230-050

Cranking

9mm

954-0U81-050

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

954-0E05-050

Cranking

15mm

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.75

954-0E13-050

Screw-on ready < screws

Damping adjustment

Door adjustment

Side adjustment +3/-1mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

17.8

F>Fmin

x 7

Drawings show application on D=0mm thick mounting plate

D=13+K-x x

26.7 D

F>2Fmin

Drawings show application on D=0mm thick mounting plate S

D=4+K-x V

35.7

F>Fmin 25

37+V

Drawings show application on D=3mm thick mounting plate

37+V

D=-2+K+F Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.76

S-type-i 110/30°

30° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

9mm K

Ø 35

Item number

954-0E09-650

954-0164-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115

3.77

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

2.5

3.5

4.5

8.5

9.5 10.5 11.5 12.5 13.5

27 D

3 9

56.5

5 30Â°

9.5

K P

Drawings show application on D=3mm thick mounting plate

x 27

2 3

13 0

60.5

30Â°

9.5

Drawings show application on D=3mm thick mounting plate

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickne ss D=3 L=31 for thickness D=9 Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.78

S-type-i 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

9mm K

Ø 35

Item number

954-0E10-650

954-0165-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115

3.79

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P D

9.5

10 10.5 11 11.5 12 12.5 13.5

49.5

Â°

4.8

V P

Drawings show application on D=3mm thick mounting plate

x 29

3 K

59.5

11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17

K Â°

4.8

Drawings show application on D=3mm thick mounting plate

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.80

S-type-i 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

18mm K

Ø 35

Item number

954-0E11-650

954-0E14-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.81

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

48 74.5

D=18

Mounting plate thickness table For further explanation > see page 3.11

45 °

37K

63.5

Drawings show application on D=0mm thick mounting plate

Drawings show application on D=18mm thick mounting plate

Drawings show application on D=0mm thick mounting plate Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.82

S-type-i 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm ‘snap-on’

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

18mm K

Ø 35

Item number

954-0E12-650

954-0E15-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.83

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-1mm

Depth adjustment +5/-1.5mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting plate drilling distance

Mounting details

K 63.5 22

min75

Drawings show application on D=0mm thick mounting plate

Drawings show application on D=3mm thick mounting plate

Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.84

S-type Plus 110

For wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

0mm

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0T10-050

248-0T70-050

248-0T93-050

248-0T13-050

248-0T71-050

248-0T94-050

248-0T69-050

248-0T72-050

248-0T95-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

9mm

248-0V69-050

248-0V71-050

248-0V70-050

248-0V72-050

248-0V56-050

248-0274-050 248-0377-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Mounting plates

Hinge cup screws If not pre-mounted

Cam adjustable mounting plate > see page 3.113

6.9

Steel mounting plates > see page 3.115

Accessories

3.5

Legend of hinge cup symbols

820-6308-050

10000 Pcs

Cover caps for hinge arm > see page 3.169 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.85

Push latch > see page 3.167

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

x 17.8

5 D=13+K-x

F>Fmin

Drawings show application on D=0mm thick mounting plate

x 3

26.7 D

37 z 16

F>2Fmin

D=4+K-x

Drawings show application on D=0mm thick mounting plate Soft closing systems

Door clearance For further explanation > see page 3.12

Glissando TL > see page 2.15

V Glissando CR > see page 2.21

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.86

S-type Plus 110 Touch opening

For wood doors without handles

Touch

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

0mm

Ø 35

Item number

915-0Z85-050

915-0Z96-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

915-0007-050

9mm

915-0032-050

915-0012-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Catches Catch

Catch with base plate

Knock-in pad

100 Pcs

Self adhesive pad

Catch

915-7016-380

Catch with base plate

915-7022-380

Knock-in pad

915-7109-050

Self adhesive pad

915-7105-050

Made of plastic

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115

Zinc diecast mounting plates > see page 3.115

3.87

52 6

9.5

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

· Hinge integrated self-opening mechanism · Effortless opening with just a light touch

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +1.5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

17.8

F>Fmin

x 7

Drawings show application on D=0mm thick mounting plate

D=13+K-x

26.7

x 16

F>2Fmin

Drawings show application on D=0mm thick mounting plate

Ø10 37

D=4+K-x

ø3 spotdrilling

5 37

9.5 Catch

19 Fixing of pad depends on the catch position

Catch with base plate

Accessories

pre-drilled hole Ø2 / 10mm

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.88

S-type 110

For wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

0mm

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0535-050

248-0532-050

248-0538-050

248-0171-050

248-0172-050

248-0400-050

248-0186-050

248-0188-050

248-0366-050

248-0197-050 200 Pcs

Drilling patterns for hinge cups > see page 3.15

Made of steel

Cranking

9mm

248-0536-050

248-0533-050

248-0539-050

248-0279-050

248-0327-050

248-0401-050

248-0482-050

248-0545-050

248-0549-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

15mm

248-0537-050

248-0534-050

248-0540-050

248-0280-050

248-0328-050

248-0402-050

248-0487-050

248-0547-050

248-0551-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115

Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.89

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Preinserted expando dowels

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

17.8

F>Fmin

x 7

Drawings show application on D=0mm thick mounting plate

D=13+K-x x

26.7 D

F>2Fmin

Drawings show application on D=0mm thick mounting plate S

D=4+K-x V

35.7

F>Fmin 25

K 37+V

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 2.15

D=-2+K-F Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

V Glissando CR > see page 2.21

37+V

Push latch > see page 3.167

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.90

S-type 110/-15°

-15° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

0mm

52 6

9.5

Ø 35

Item number

248-0V14-050

248-0V39-050

248-0V40-050

248-0V41-050

248-0V42-050

248-0V43-050

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.91

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

15Â°

5 x

Drawings show application on D=0mm thick mounting plate

Door clearance For further explanation > see page 3.12

Accessories Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.92

S-type 110/15°

15° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

Ø 35

Item number

248-0080-050

248-0V62-050

248-0C66-050

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.93

52 6

9.5

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

L Mounting details

15째

61.5

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

14.5

15째

59.5

K 30

P 14.5

Drawings show application on D=0 and K=4mm thick mounting plate

x,P 29

15째

61.5

L=37 for thickness D=0 L=36 for thickness D=1 L=36 for thickness D=2 L=35 for thickness D=3 L=33 for thickness D=9

Drawings show application on 29 S D=0 and plate D K=4mm thick mounting Soft closing systems

Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

15째

Glissando TL > see page 2.15 K

4 5

14.5

K P

59.5

14.5

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.94

S-type 110/24°

24° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

52 6

9.5

Ø 35

Item number

248-0V18-050

248-0V45-050

248-0Z29-050

248-0V47-050

248-0V48-050

248-0V49-050

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.95

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

x S

3 37 63.5

24Â° 8

24.5

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 2.15

Door clearance For further explanation > see page 3.12

Accessories Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.96

S-type 110/30°

30° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

52 6

9.5

Ø 35

Item number

248-0675-050

248-0665-050

248-0677-050

248-0N12-050 248-0N13-050 248-0N14-050 Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.97

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P 3

27 D

3.5

4.5

8.5

9.5 10.5 11.5 12.5 13.5

3 9

56.5

2.5

30 30Â°

9.5

Drawings show application on D=3mm thick mounting plate

x 27

13 0

60.5

30Â° x

9.5

5 K

L L

Drawings show application on D=3mm thick mounting plate Soft closing systems Glissando TL > see page 2.15

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9 Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.98

S-type 110/45°

45° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

52 6

9.5

Ø 35

Item number

248-0433-050

248-0431-050

248-0518-050

248-0N16-050 248-0N17-050 248-0N18-050 Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.99

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P 3

9.5

10 10.5 11 11.5 12 12.5 13.5

49.5

Â°

4.8

V P

Drawings show application on D=3mm thick mounting plate

x 29

3 K

59.5

11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17

K Â°

4.8

Drawings show application on D=3mm thick mounting plate Soft closing systems Glissando TL > see page 2.15

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.100

S-type 110/45°

45° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

18mm

52 6

9.5

Ø 35

Item number

248-0285-050

248-0283-050

248-0291-050

248-0N20-050 248-0N21-050 248-0N22-050 Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.101

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

48 74.5

D=18

Mounting plate thickness table For further explanation > see page 3.11

37K

63.5

Drawings show application on D=0mm thick mounting plate

Drawings show application on D=18mm thick mounting plate

Drawings show application on D=0mm thick mounting plate Soft closing systems Glissando TL > see page 2.15

Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.102

S-type 110/90°

For wood door cabinets with blind panels

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

18mm

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0745-050

248-0742-050

248-0748-050

248-0N24-050 248-0N25-050 248-0N26-050 248-0L61-050

248-0N62-050

248-0Z81-050

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.103

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Easy-fix system

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

63.5 19

min75

Drawings show application on D=0mm thick mounting plate

Soft closing systems Glissando TL > see page 2.15

Drawings show application on D=3mm thick mounting plate

Door clearance For further explanation > see page 3.12

Accessories Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.104

S-type 110

110°

For aluminium frame doors

· Opening angle · Hinge on plate mounting system

110˚ ‘snap-on’ Interaxis

28mm 28

Cup type

Cranking

950-0T27-050

0mm

200 Pcs

Cup made of zinc, arm made of steel

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.105

Item number

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

17.8

Mounting plate thickness table For further explanation > see page 3.11

G 19

F>Fmin

Drawings show application on D=0mm thick mounting plate

10 1.5 5.5 42

G 19 28

90Ëš Ă˜7.0

Drilling pattern for aluminium frame hinges

Screws included Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

17 0.5

0.7

1.1

1.4

1.8

2.9

18 0.5

0.7

1.0

1.3

1.7

2.5

19 0.5

0.7

0.9

1.2

1.6

2.1

20 0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0.5

3.106

S-type 170

For wood doors

135°-165°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

135˚-165˚ 35mm 12mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0R14-050 248-0R17-050 248-0R15-050

0mm

248-0M73-050 248-0R13-050 248-0M74-050 248-0198-050 Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Cranking

248-0R18-050 *248-0V65-050

0mm

*248-0S69-050

With adjustable opening angle

50 Pcs

Drilling patterns for hinge cups > see page 3.15 * Available upon special request > see page 0.3

Made of steel and zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.107

Adjustable opening angle 135°

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Preinserted expando dowels

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

x 52

F>Fmin

K 37

5 6

Â°

-1.4

D=13+K-x Drawings show application on D=0mm mounting plate

C value with D=0 mounting plates

In 90Â°position the door is only 1.4mm distant from side panel

K C

Soft closing systems Glissando TL 170 > see page 2.17

Accessories

-9.0 -8.1 -7.1 -6.1 -5.2

Door clearance For further explanation > see page 3.12 Push latch > see page 3.167

V Glissando CR > see page 2.21

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN

Gap ZMIN=0.5

3.108

S-type 170

For wood doors

135°-165°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

135˚-165˚ 35mm 12mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

Ø 35

Item number

248-0162-050

248-0163-050

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115 Face frame adapters > see page 3.117

3.109

52 6

9.5

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

90Ëš

Ëš

5 2

79 S

4 F>2Fmin

F>2Fmin

F>Fmin

19 K

37 37

67 67

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

Mounting details

37 7.6

7.6

7 Drawings show application on D=0mm thick mounting plate

D=4+K-x C value with D=0 mounting plates

S70 S

67 67

V V

7979

7070

79 SS

0.9 1.9 2.9 3.8

37 37 V V

F>Fmin F>Fmin F>Fmin

67 67

V V

61 SS

37 37

6161

67 67

61 9

F>2Fmin F>2Fmin F>2Fmin

Drawings show application on D=0mm thick mounting plate 7.6

Soft closing systems Glissando TL 170 > see page 2.17

Drawings show application on D=9mm thick mounting plate

Drawings show application on D=18mm thick mounting plate

Accessories

Door clearance For further explanation > see page 3.12 Push latch > see page 3.167

V Glissando CR > see page 2.21

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN

Gap ZMIN=0.5

3.110

S-type for Pie-cut Corner Cabinet

For wood doors

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm ‘snap-on’

Interaxis

45mm

48mm

52mm

Cup type

Corner cabinet

52 6

9.5

Ø 35

Item number

248-0U21-050 248-0U16-050

248-0308-050

248-0U22-050

248-0Z20-050

248-0V15-050

Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Cam adjustable mounting plate > see page 3.113 Steel mounting plates > see page 3.115 Zinc diecast mounting plates > see page 3.115

3.111

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Adjustments

V = 16 - 22 mm K = 3 - 5 mm

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing

Any S-type-i mounting plate of thickness D=0 can be used

-2 11.5 +3 -1 +5

-1.5

D=3

Accessories Cover caps for hinge arm > see page 3.169

3.112

S-type Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Cam adjustable mounting plate

200 Pcs

3.113

Made of steel

Height adjustment +/- 2mm

Concealed Hinges

Mounting plate type

Mounting plate thickness

10.5

min 11.5

min 10.5

Mounting plate thickness (D)

min 9.5

Ø4.5

Item number

0mm

244-0258-050

244-0261-050 *244-0264-050 *244-0342-050 244-0270-050

2mm

244-0259-050

244-0262-050 *244-0265-050 *244-0343-050 244-0271-050

3mm

244-0260-050

244-0263-050 *244-0266-050 *244-0344-050 244-0272-050

Ø5

Item number

Ø3

Item number

Ø10

Ø5

Item number

* Available upon special request > see page 0.3

Legend of mounting plate type symbols

Pre-mounted 13mm euro screws

Pre-mounted 15mm euro screws

10.5 Pre-mounted chipboard screws

Machine insertion ready

Pre-mounted 10.5mm expanding dowels

3.114

S-type Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates

200 Pcs

Made of steel

200 Pcs

Made of zinc

Fixing screws for mounting plates If not pre-mounted

6.3 L

Euro screws

821-6304-050 L=11 821-6323-050 L=13 821-6332-050 L=15 5000 Pcs

3.115

7.5

4 16

Chipboard screws

820-6328-050 10000 Pcs

Item number

10.5

Item number

Ø5

Item number

Ø3

Item number

Ø10

Item number

min 10.5

13 Ø5

min 10.5

Ø4.5

Ø6.3 min 12

Ø5

Ø6.3 min 10

3.9

5.8

min 8

Mounting plate thickness (D)

Ø6.3

min 11

Concealed Hinges

Height adjustment +/- 2mm

Mounting plate type

Mounting plate thickness

Ø5

Item number

0mm

244-1136-050 *244-1233-050 244-0Z26-050 244-0134-050 244-0118-050 *244-0136-050 *244-0166-050 244-0P26-050

1mm

244-1137-050 *244-1228-050

2mm

244-1138-050 *244-1229-050 244-0Z63-050 244-0562-050 244-0120-050 *244-0566-050 *244-0568-050 244-0V19-050

3mm

244-1139-050 *244-1234-050

6mm

244-1645-050

244-0561-050

*244-0565-050 *244-0567-050

244-0135-050 244-0119-050 *244-0137-050 *244-0167-050 244-0P27-050 244-0Z51-050 *M ounting plates with premounted 7.5mm expanding dowels available upon special request > see page 0.3

* Available upon special request > see page 0.3

9mm

244-3651-650

244-0M33-650 244-0P29-650

18mm

244-3016-650

244-0085-650 244-0095-650

* Available upon special request > see page 0.3

Legend of mounting plate type symbols

11 Screw on ready for euro screws < s crews

Screw-on ready for chipboard screws

Pre-mounted 11mm euro screws

13 Pre-mounted 13mm euro screws

15 Pre-mounted 15mm euro screws

10.5 Pre-mounted chipboard screws

Machine insertion ready

Pre-mounted 10.5mm expanding dowels

3.116

S-type Face Frame Mounting Plates

For all S-type concealed hinges

Drilling pattern

Dimensions

Face frame adapter for S-type hinges 10

200 Pcs

Ă˜3

Made of zinc alloy

Face frame adapter for S-type hinges cam adjustable 10

200 Pcs

Made of zinc alloy

Fixing screw for mounting plates If not pre-mounted

7.5

4 12

Chipboard screws

820-6328-050 10000 Pcs

3.117

Ă˜3

Height adjustment +/- 2mm

Mounting plate thickness (D)

Mounting plate type

Concealed Hinges

Mounting plate thickness

Item number

0mm

244-3653-650

3mm

244-3654-650

6mm

244-3655-650

0mm

244-3600-650

3mm

244-3603-650

Legend of mounting plate type symbols

Screw-on ready for chipboard screws < screws

3.118

B-type Hinges

‘Slide-on’ mounting system

Designed for a wide use

‘ConﬁdentClose’

· Proven and reliable hinge-to-plate mounting solution · Cost effectiveness

· Solution for different applications and materials · Proven solution for RTA furniture, houshold application and tall cabinets

· 1 Fast closing · 2 Late start of deceleration action · 3 Quiet landing with ‘SoftTouch’

Concealed Hinges

Soft closing options

Adjustable damping

· Hinge integrated · Add-on with Glissando ready hinge cup · Stand-alone · Rigid slide-on hinge design enables optimal performance when used with soft closer

· Adjustable damping assures perfect functioning on every door

B-type-i 110

For wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm slide-on

Interaxis

45mm

48mm 48

Technical details

0mm

Ø 35

Item number

954-0B97-050 954-0C01-050

Cranking

Cup type

9.5

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

954-0B98-050 954-0C02-050

Cranking

9mm

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

954-0B99-050 954-0C03-050

Cranking

15mm

Drilling patterns for hinge cups > see page 3.15 K

43.5

62.8

31.5

200 Pcs

Made of steel and plastic

Mounting plates

3.121

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 3.153

6.9

Zinc diecast mounting plates > see page 3.153

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

Screw-on ready < screws

Damping adjustment

Door adjustment

Side adjustment +3/-0.5mm

Depth adjustment +4/-0mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance 17.8

Mounting plate thickness table For further explanation > see page 3.11

61.5

F>Fmin

5 D=13+K-x

26.7

61.5

x V

61.5

K 37+V

Drawings show application on D=3mm thick mounting plate

D=4+K-x

35.7

F>Fmin

5 37

F>2Fmin

Drawings show application on D=0mm thick mounting plate

0 3

Drawings show application on D=0mm thick mounting plate

K 37

37+V

D=-2+K+F Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.122

B-type-i 110/30°

30° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm slide-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

9mm K

Ø 35

Item number

954-0153-650

954-0147-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

100 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

3.123

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 3.153

6.9

Zinc diecast mounting plates > see page 3.153

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-0.5mm

Depth adjustment +4/-0mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P 27 D

2.5 3

4.5

8.5

9.5 10.5 11.5 12.5 13.5

3 9

3.5

30째

K 30

9.5 P

Drawings show application on D=3mm thick mounting plate

x 27

2 3

13 0

30째

9.5

K P

38.5

63.5

Drawings show application on D=3mm thick mounting plate

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

45째

Door clearance For further explanation > see page 3.12

D=18

56.5

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

45째

K 19

3.124

B-type-i 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm slide-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

9mm K

Ø 35

Item number

954-0154-650

954-0148-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

200 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

3.125

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 3.153

6.9

Zinc diecast mounting plates > see page 3.153

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-0.5mm

Depth adjustment +4/-0mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P S

28.5

9 3

10 10.5 11 11.5 12 12.5 13.5

9.5

45Â° V

4.8

Drawings show application on D=3mm thick mounting plate

x D

28.5

11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17 3

45Â°

4.8

K L

Drawings show application on D=3mm thick mounting plate

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.126

B-type-i 110/45°

45° angled application for wood doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm slide-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

18mm K

Ø 35

Item number

954-0158-650

954-0168-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

200 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates

3.127

Hinge cup screws If not pre-mounted

Steel mounting plates > see page 3.153

6.9

Zinc diecast mounting plates > see page 3.153

Accessories

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Cover caps for hinge arm > see page 3.169

9.5

Screw-on ready < screws

Door adjustment

Damping adjustment

Side adjustment +3/-0.5mm

For further explanation > see pages 3.20-3.23

63.5

38.5

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

45°

Mounting 15 details

Mounting plate drilling distance

D=18

56.5

Drawings show application on D=0mm thick mounting plate

45°

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Door clearance For further explanation > see page 3.12

D=18

Drawings show application on 19 19 56.5 D=0mm thick mounting plate

45°

63.5

38.5

56.5

Drawings show application on D=18mm thick mounting plate

45°

38.5

Mounting plate thickness table For further explanation > see page 3.11

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.128

B-type-i 110/90°

For wood door cabinets with blind panels

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11mm slide-on

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking 12

18mm K

9.5

Ø 35

Item number

954-0159-650

954-0149-650

Drilling patterns for hinge cups > see page 3.15

43.5

62.8

31.5

200 Pcs

Cup made of steel and plastic, arm made of zinc

Blind panel mounting plate

244-0810-650 15

244-0P28-650

This mounting plate can be used only with B-type-i 110/90° hinges. Information about mounting plate symbols > see page 3.153

200 Pcs

Cup made of steel and plastic, arm made of zinc

Mounting plates These hinges can only be used with blind panel mounting plates

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Accessories Cover caps for hinge arm > see page 3.169

3.129

Screw-on ready < screws

Damping adjustment

Door adjustment

Side adjustment +3/-0.5mm

Depth adjustment +4/-0mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

For further explanation > see page 3.25

Height adjustment +2/-2mm

Mounting details

Mounting plate drilling distance

F min22

Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.130

B-type 110

For wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm min. 11.5mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0G54-050 248-0G49-050 248-0G59-050

0mm

248-0G79-050 248-0K40-050

248-0L63-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

248-0G55-050 248-0G50-050 248-0G60-050

9mm

248-0G80-050 248-0K76-050 Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

248-0G56-050 248-0G51-050 248-0G61-050

15mm

248-0G81-050

248-0L04-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.131

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance 17.8

Mounting plate thickness table For further explanation > see page 3.11

61.5

F>Fmin

5 D=13+K-x

26.7

Drawings show application on D=0mm thick mounting plate

K 37

61.5

x V

F>2Fmin

35.7

61.5

K 37+V

F>Fmin 25

Glissando TL > see page 2.15

D=-2+K+F Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

V Glissando CR > see page 3.21

37+V

Drawings show application on D=3mm thick mounting plate

Soft closing systems

5 D=4+K-x

Drawings show application on D=0mm thick mounting plate

Push latch > see page 3.167

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.132

B-type 110/30°

30° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

52 6

9.5

Ø 35

Item number

248-0G57-050 248-0G52-050 248-0G62-050

9mm

248-0G82-050

248-0L72-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.133

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate drilling distance

Mounting details

Mounting plate thickness table For further explanation > see page 3.11

27 D

2.5

3.5

4.5

8.5

9.5 10.5 11.5 12.5 13.5

3 30

K 30째

K 30

9.5 P

3 9

Drawings show application on D=3mm thick mounting plate

x 27

2 3

13 0

30째

9.5

L=37 for thickness D=0 L=36 for thickness D=1 L=35 for thickness D=2 L=34 for thickness D=3 L=31 for thickness D=9

63.5

38.5 show application on D Drawings D=3mm thick mounting plate

Soft closing systems 45째

Glissando TL V > see page 2.15

Accessories

Door clearance For further explanation > see page 3.12

Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

56.5

FMIN

D=18

Gap ZMIN=0 45째

K 19

3.134

B-type 110/45°

45° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

9mm

52 6

9.5

Ø 35

Item number

248-0L32-650

248-0L27-650 248-0M83-050

248-0N38-050

248-0L71-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.135

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

P S

28.5

9 3

K K

9.5

10 10.5 11 11.5 12 12.5 13.5

4 5

45Â° V

4.8

Drawings show application on D=3mm thick mounting plate

x D

28.5

11.5 12.5 13 13.5 14 14.5 15 15.5 16 16.5 17

K 45Â°

4.8

x V

Drawings show application on D=3mm thick mounting plate

Soft closing systems Glissando TL > see page 2.15

L=36 for thickness D=0 L=35 for thickness D=1 L=34 for thickness D=2 L=33 for thickness D=3 Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.136

B-type 110/45°

45° angled application for wood doors

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

18mm

52 6

9.5

Ø 35

Item number

248-0L33-050

248-0L28-050 248-0M84-050

248-0L46-050

248-0L70-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.137

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

63.5

38.5

Concealed Hinges

For further explanation > see pages 3.20-3.23

45°

Mounting 15 details

Mounting plate drilling distance

D=18

56.5

Mounting plate thickness table For further explanation > see page 3.11

45°

K 48

Drawings show application on D=18mm thick mounting plate

38.5

37 37

Drawings show application on D=3mm thick plate 19 19 56.5 mounting

Glissando TL > see page 2.15

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

Accessories D=18

Soft closing systems D=18

37 15

45°

56.5

63.5

38.5

Drawings show application on D=0mm thick mounting plate

V 45°

45°

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.138

B-type 110/90°

For wood door cabinets with blind panels

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

52 6

9.5

5.5

· · · ·

Ø 35

Item number

248-0G58-050 248-0G53-050 248-0G63-050

18mm

248-0G83-050

248-0L73-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Cranking

248-0255-050

0mm

248-0V53-050

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Cranking

244-0810-650

200 Pcs

These hinges can only be used with blind panel mounting plates

244-0813-650

244-0C32-650

244-0P28-650

This mounting plate can be used only with B-type 110/90° hinges. Information about mounting plate symbols > see page 3.153

Made of zinc

Mounting plates

3.139

248-0V66-050

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Premounted euro screws

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

K F

min22

19 V

min22

Soft closing systems Glissando TL > see page 2.15

Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.140

B-type 110

110°

For aluminium frame doors

· · · ·

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on Interaxis

28mm 28

Technical details

Cranking

Item number

950-0T26-050

0mm

200 Pcs

Cup made of zinc, arm made of steel

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.141

Cup type

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

17.8

Mounting plate thickness table For further explanation > see page 3.11

61.5

F>Fmin G 7+D

Drawings show application on D=0mm thick mounting plate

10 1.5 5.5 42

G 19 28

90Ëš Ă˜7.0

Drilling pattern for aluminium frame hinges

Screws included Door clearance For further explanation > see page 3.12

Accessories Cover caps for hinge arm > see page 3.169

17 0.5

0.7

1.1

1.4

1.8

2.9

18 0.5

0.7

1.0

1.3

1.7

2.5

19 0.5

0.7

0.9

1.2

1.6

2.1

20 0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0.5

3.142

B-type 110

For aluminium frame doors

· · · ·

110°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm slide-on Interaxis

28mm 28

Cup type

Cranking

950-0464-050

0mm

200 Pcs

Made of steel

Cranking

950-0465-050

9mm

200 Pcs

Made of steel

Cranking

950-0466-050

15mm

200 Pcs

Made of steel

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.143

Item number

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance S

Mounting plate thickness table For further explanation > see page 3.11

18.7

61.5

F>Fmin

2 7+D

D=13+K-x

27.6

61.5

17 x G

F>2Fmin

16+D

D=4+K-x

36.6

61.5

F>Fmin

37+H

22+D

D=-2+K+F

Soft closing systems Glissando AL > see page 2.19

Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

17 0.5

0.7

1.1

1.4

1.8

2.9

18 0.5

0.7

1.0

1.3

1.7

2.5

19 0.5

0.7

0.9

1.2

1.6

2.1

20 0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0.5

3.144

B-type 170

For wood doors

135°-165°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

135°-165° 35mm 112mm slide-on

Interaxis

45mm

48mm

52mm

Technical details

Cup type

Cranking

52 6

9.5

Ø 35

Item number

248-0R10-050 248-0P43-050 248-0R11-050

0mm

248-0L51-050

248-0R12-050

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Cranking

*248-0S05-050 *248-0S06-050

0mm

Drilling patterns for hinge cups > see page 3.15 * Available upon special request > see page 0.3

With adjustable opening angle

50 Pcs

Adjustable opening angle

Made of steel and zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.145

5.5

· · · ·

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

· Enable better accessibility into cabinet interior due to the wider opening angle · Opening angle can be easily adjusted by rotating the appropriate screw on hinge arm

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Mounting plate thickness table For further explanation > see page 3.11

x 52

F>Fmin

K 37

5 6

-1.4

D=13+K-x

Drawings show application on D=0mm mounting plate

C value with D=0 mounting plates K C

Soft closing systems Glissando TL 170 > see page 2.17

Accessories

-9.0 -8.1 -7.1 -6.1 -5.2

Door clearance For further explanation > see page 3.12 Push latch > see page 3.167

V Glissando CR > see page 3.21

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN

Gap ZMIN=0

3.146

B-type 170

For wood doors

135°-165°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

135°-165° 35mm 112mm slide-on

Interaxis

45mm

48mm

52mm

Cup type

Cranking

9mm

Ø 35

Item number

248-0160-050

248-0161-050

Drilling patterns for hinge cups > see page 3.15

50 Pcs

Made of steel and zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.147

52 6

9.5

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

5.5

· · · ·

Screw-on ready < screws

· Enable better accessibility into cabinet interior due to the wider opening angle · Opening angle can be easily adjusted by rotating the appropriate screw on hinge arm

Door adjustment

Side adjustment +3/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

F>2Fmin

90˚

79 S

4 F>2Fmin

2 V

F>Fmin

19 K

37 37

67 67

Mounting plate thickness table For further explanation > see page 3.11

Mounting plate drilling distance

Mounting details

37 7.6

7.6

7 Drawings show application on D=0mm thick mounting plate

D=4+K-x C value with D=0 mounting plates

S70 S

67 67

V V

7979

7070

79 SS

0.9 1.9 2.9 3.8

37 37 V V

F>Fmin F>Fmin F>Fmin

67 67

V V

61 SS

37 37

6161

67 67

61 9

F>2Fmin F>2Fmin F>2Fmin

Drawings show application on D=0mm thick mounting plate 7.6

Soft closing systems Glissando TL 170 > see page 2.17

Drawings show application on D=9mm thick mounting plate

Drawings show application on D=18mm thick mounting plate

Accessories

Door clearance For further explanation > see page 3.12 Push latch > see page 3.167

V Glissando CR > see page 3.21

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 2.6

0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 5.1 FMIN

Gap ZMIN=0

3.148

B-type for Pie-cut Corner Cabinet

For wood doors

· Drilling diameter for hinge cup · Drilling depth · Hinge on plate mounting system

35mm 11.5mm slide-on

Interaxis

45mm

48mm 48

Cup type

Corner cabinet

9.5

Ø 35

Item number

248-0T81-050

248-0T80-050

248-0U13-050 248-0U14-050 Drilling patterns for hinge cups > see page 3.15

100 Pcs

Cup made of steel, arm made of zinc

Mounting plates Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.149

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Door adjustment

Side adjustment +3/-1mm

Height adjustment +2/-2mm

Depth adjustment +5/-1.5mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

Adjustments

V = 16 - 22 mm K = 3 - 5 mm

The diagonal adjustment is made by rotating the appropriate screw as shown on the drawing.

Any B-type mounting plate of thickness D=0 can be used.

-2 11.5 +3 -1 +5

-1.5

D=3

Accessories Cover caps for hinge arm > see page 3.169

3.150

B-type Flap door hinge

For wood doors

· · · ·

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

90˚ 35mm 11.5mm slide-on Interaxis

24mm

Cup type

Cranking

0mm

200 Pcs

Steel mounting plates > see page 3.153 Zinc diecast mounting plates > see page 3.153

3.151

Hinge cup screws If not pre-mounted

6.9

3.5

926-0A26-050

right

926-0A27-050

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Item number

left

Cup made of steel

Mounting plates

24 38

Ø 35

21.5

Screw-on ready < screws

· To be used with flap stay mechanisms · Mounted on the cabinet side · Standard drillings

Door adjustment

Side adjustment +0.5/-0.5mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting plate thickness table For further explanation > see page 3.11

Mounting details

B (mm)

Ø5

D=mounting plate height X=22.5 + K - A +/-2mm height adjustment

Ø5

32 A

min 1

11.5 K

11.5

K Ø35 X

Ø35 X

Accessories

Door clearance For further explanation > see page 3.12 Cover caps for hinge arm > see page 3.169

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.152

B-type Mounting Plates

For B-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates

60.3

200 Pcs

Made of steel

Zinc diecast mounting plates

200 Pcs

Made of zinc

Fixing screws for mounting plates If not pre-mounted

6.3 L

Euro screws

821-6304-050 L=11 821-6323-050 L=13 821-6332-050 L=15 10000 Pcs

3.153

7.5

4 16

Chipboard screws

820-6328-050 10000 Pcs

Item number

Ø10

Item number

Ø5

Item number

min 10.5

Ø3

min 7.5

Ø5

min 10.5

13 Ø5

min 11

4.5

10.5

Ø4.5

Ø6.3 min 11

5.8

min 9

Mounting plate thickness (D)

Ø6.3

7.5

Concealed Hinges

Height adjustment +/- 2mm

Mounting plate type

Mounting plate thickness

Ø5

Item number

0mm

244-0866-050 *244-0L29-050 244-0965-050 244-0929-050 *244-0L26-050 *244-0L50-050 244-0H64-050 244-0P24-050

1mm

244-0T40-050

244-0K95-050

*244-0S65-050

2mm

244-0T28-050

244-0K96-050

*244-0S66-050 *244-0V64-050 244-0S68-050

3mm

244-0867-050 *244-0L39-050 244-0G19-050 244-0930-050 *244-0L98-050 *244-0L40-050 244-0H65-050 244-0P25-050

244-0S67-050

* Available upon special request > see page 0.3

4mm

244-0L37-650

244-0K97-650

244-0M28-650

5mm

244-0L38-650

244-0K98-650 244-0T14-650

244-0M29-650

6mm

244-0232-650

244-0914-650

9mm

244-0062-650

244-0067-650 244-0P41-650

18mm

244-0063-650

244-0068-650 244-0175-650

*244-0B12-650

* Available upon special request > see page 0.3

Legend of mounting plate type symbols

13 Screw on ready for euro screws < s crews

Screw-on ready for chipboard screws

Pre-mounted 13mm euro screws

15 Pre-mounted 15mm euro screws

Pre-mounted chipboard screws

Machine insertion ready

7.5

10.5

Premounted 7.5mm expanidng dowels

Pre-mounted 10.5mm expanding dowels

3.154

B-type Mounting Plates

For B-type concealed hinges

Drilling pattern

Dimensions

Steel mounting plates Âˇ Back-to back application 60.3

200 Pcs

Made of steel

Zinc diecast mounting plates Âˇ For 18mm inset doors 80

200 Pcs

Made of zinc

Fixing screws for mounting plates If not pre-mounted

6.3 L

Euro screws

821-6304-050 L=11 821-6323-050 L=13 821-6332-050 L=15 10000 Pcs

3.155

7.5

4 16

Chipboard screws

820-6328-050 10000 Pcs

10.5

S 15

Mounting plate thickness (D)

Concealed Hinges

Height adjustment +/- 2mm

Mounting plate type

Mounting plate thickness

Ã˜5

5.8 Item number

Item number

244-0V50-050

3mm

S>=1

Minimum panel thickness is 15mm. 2mm

3D-PODLOGA-ZAMAKNJENA Slide on

Ime datoteke:

Fax:

d.d. DEKANI KOPER - SLOVENIJA

Franc BANKO 16.01.2010 +386 5 6690 310

RAZVOJNI ODDELEK-R&R

Fax: e-mail:

+398 5 6690 301 @

Stran:

244-0036-650

1 od 1

e-mail:

Datum: Telefon:

Izdelal:

Telefon:

V=18

PREDLOG VGRADNJE za kupca :

File name:3D-PODL-ZAMAKNJENA

Fits standard 37mm drilling Legend of mounting plate type symbols

10.5

PODLOGA-KRIZNA Telefon: Fax: e-mail:

Slide on

Datum:

Franc BANKO 16.01.2010

Telefon:

+386 5 6690 310

Fax: e-mail:

+398 5 6690 301 @

Izdelal:

Ime datoteke:

PREDLOG VGRADNJE za kupca :

File name:PODLOGA-KRIZNA

d.d. DEKANI KOPER - SLOVENIJA RAZVOJNI ODDELEK-R&R

Stran:

Screw on ready for euro screws < screws

Pre-mounted 10.5mm expanding dowels

1 od 1

3.156

B-type Hinge Ø40 For Door Thickness up to 40mm

· · · ·

93°

For wood doors

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

93˚ 40mm 14.5mm slide-on Interaxis

52mm 7.5

Ø 40

Cup type

Cranking

249-7301-050

0mm

Drilling patterns for hinge cups > see page 3.15

200 Pcs

Made of steel

Cranking

249-7302-050

10mm

200 Pcs

Drilling patterns for hinge cups > see page 3.15

Made of steel

Mounting plates Steel mounting plate > see page 3.161

Soft closing systems Glissando CR > see page 3.21

3.157

Item number

Hinge cup screws If not pre-mounted

6.9

3.5

Legend of hinge cup symbols

820-6308-050

10000 Pcs

Accessories Push latch > see page 3.167

Screw-on ready < screws

Door adjustment

Side adjustment +2/-1mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate thickness table For further explanation > see page 3.11

18 19 20 21 22 23 24 25 26 27 28 29 30 31 32

3 4 60 37 60 37 K

F≥Fmin F≥Fmin

3 D

x 3

9 10 11 12 13 14 15 16 17 18 19 20 21 22

3 D

5 6

F≥2Fmin X

F≥2Fmin

7 8 9

V D+14

D+14

Door clearance (Fmin)

K K

0.4

0.6

0.7

0.8

1.0

1.2

1.4

1.6

2.0

2.3

2.6

2.8

3.2

6.1

9.0 10.9

0.4

0.6

0.7

0.8

1.0

1.2

1.4

1.6

2.0

2.3

3.5

2.8

3.1

5.3

8.2 10.2

0.4

0.5

0.7

0.8

1.0

1.2

1.3

1.5

2.0

2.2

2.5

2.8

3.1

4.7

7.5

9.4

0.4

0.5

0.8

1.0

1.1

1.3

1.5

2.0

2.2

2.4

2.7

3.0

4.1

6.8

8.7

0.4

60 0.5 3760

0.7 0.6

0.8

1.0

1.1

1.3

1.5

1.9

2.2

2.4

2.7

3.0

3.6

6.2

8.0

0.4

0.5 z 0.6

0.8

0.9

1.1

1.3

1.5

1.9

2.1

2.4

2.6

2.9

3.5

5.6

7.4

0.4

0.5 z 0.6

0.8

0.9

1.1

1.3

1.4

1.9

2.1

2.4

2.6

2.9

3.5

5.1

6.8

0.4

0.4X

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.1

2.3

2.6

2.8

3.4

4.6

6.3

0.4

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.4

4.1

5.8

0.4

0.5

0.6

0.7

0.9

1.0

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.3

4.1

5.4 FMIN

0.4

D+22

63 3763 37

V D+22

D+4

V D+4

5 z

3.158

B-type Hinge Ø40 For Door Thickness up to 40mm

· · · ·

93°

For wood doors

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

93˚ 40mm 14.5mm slide-on Interaxis

52mm 7.5

Ø 40

Cup type

Cranking

249-7303-050

18mm

200 Pcs

Drilling patterns for hinge cups > see page 3.15

Made of steel

Cranking

249-7304-650

22mm

200 Pcs

Drilling patterns for hinge cups > see page 3.15

Made of steel

Mounting plates Steel mounting plate > see page 3.161

3.159

Item number

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

K F≥Fmin X

Door adjustment

V D+4

Side adjustment +2/-1mm

63 37

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

For further explanation > see pages 3.20-3.23

Concealed Hinges

60 F≥2F 37 min X

F≥Fmin X

D+14

Mounting D+4 details

Mounting plate thickness table For further explanation > see page 3.11

1 D

9 10 11 12

63 37

9 10

F≥2Fmin

11 12

D+22 V

9 10 11 12 13 14 15 16

D+14 D

-2 -1

S 60 37

60 37

D+26

Door clearance (Fmin)

1 D

9 11 12

60 37

6 X

D+26

4 60 37

0.4

0.6

0.7

0.8

1.0

1.2

1.4

1.6

2.0

2.3

2.6

2.8

3.2

6.1

9.0 10.9

0.4

0.6

0.7

0.8

1.0

1.2

1.4

1.6

2.0

2.3

3.5

2.8

3.1

5.3

8.2 10.2

0.4

0.5

0.7

0.8

1.0

1.2

1.3

1.5

2.0

2.2

2.5

2.8

3.1

4.7

7.5

9.4

0.4

0.5

0.7

0.8

1.0

1.1

1.3

1.5

2.0

2.2

2.4

2.7

3.0

4.1

6.8

8.7

0.4

0.5

0.6

0.8

1.0

1.1

1.3

1.5

1.9

2.2

2.4

2.7

3.0

3.6

6.2

8.0

0.4

0.5

0.6

0.8

0.9

1.1

1.3

1.5

1.9

2.1

2.4

2.6

2.9

3.5

5.6

7.4

0.4

0.5

0.6

0.8

0.9

1.1

1.3

1.4

1.9

2.1

2.4

2.6

2.9

3.5

5.1

6.8

0.4

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.1

2.3

2.6

2.8

3.4

4.6

6.3

0.4

0.5

0.6

0.8

0.9

1.1

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.4

4.1

5.8

0.4

0.5

0.6

0.7

0.9

1.0

1.2

1.4

1.8

2.0

2.3

2.5

2.8

3.3

4.1

5.4 FMIN

0.4

V D+22

3.160

B-type Mounting Plates For Hinge Ă˜40

Slide-on hinge to plate mounting

Drilling pattern

Steel mounting plates

Fixing screws for mounting plates If not pre-mounted

6.3 L

Euro screws

821-6323-050 L=13 821-6332-050 L=15 10000 Pcs

3.161

7.5

4 16

Chipboard screws

820-6328-050 10000 Pcs

Height adjustment +/- 2mm

Concealed Hinges

Mounting plate type

Mounting plate thickness

Mounting plate thickness (D)

min 11

Ă˜6.3

Item number

4mm

244-7324-050

244-7314-050

5mm

244-7325-050

244-7315-050

6mm

244-7326-050

244-7316-050

8mm

244-7328-050

244-7318-050

3.9

Ă˜5

Legend of mounting plate type symbols

14 Screw-on ready for chipboard screws

Pre-mounted 14mm euro screws

3.162

Wide Angle Hinge

For wood doors

· · · ·

270°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

270˚ 35mm 12.5mm key-hole With spring

Technical details

Cup type

Nickel plated

Item number

241-0043-650 241-0050-650

200 Pcs

Made of zinc

Mounting plate Nickel plated

244-0907-650

D=0mm

244-0848-650 244-0D99-650

D=2mm

244-0E02-650

D=6mm

244-0D47-650 13

200 Pcs

Made of zinc

Mounting plates This mounting plate can be used only with Wide angle hinge. Information about mounting plate symbols > see page 3.153

3.163

244-0D46-650

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Premounted euro screws

Door adjustment

Side adjustment +3/-0mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

With spring

Mounting details S

Mounting plate drilling distance

S S S

6.56.5 6.5

6.5

Mounting plate thickness table For further explanation > see page 3.11

16 0

7 7 18718 18

7 18

35 52

V V V

Drawings show application on D=0 mounting plate and S=18 side panel. S

11.5

V V V

P P 7 7 P = 0.5 P18 min.F min.F = 7 0.5 187 min.F = 0.5min.F 18 = 0.5 18

30 30 30

V V V

7 18.5

35 52

4 35 35 52 52 35 52

7 7 7 18.5 18.5 18.5

Drawings show application on D=6mm thick mounting plate

5 P

6 7 8 9 10

0 2

6.56.5 6.5

0 2

11.5 11.5 11.5

6.5

0 2

S SD D S D

35 35 52 52 35 52

0 2

2 6 6 6

37 Mounting plate drilling distance

Door thickness For correct opening the door thickness should not exceed (VMAX) 21mm

3.164

Refrigerator Cabinet Door Hinge

· · · ·

100°

Opening angle Drilling diameter for hinge cup Drilling depth Hinge on plate mounting system

110˚ 35mm 11.5mm key-hole

Interaxis

45mm

48mm 48

Technical details

Cup type

Cranking

9.5

Ø 35

Item number

248-0R09-050 248-0K10-050

0mm

248-0M41-050 Drilling patterns for hinge cups > see page 3.15

200 Pcs

Cup made of steel, arm made of zinc

Steel mounting plates

244-0655-050

D=0mm

244-0846-050

Information about mounting plate symbols > see page 3.153

500 Pcs

Made of steel

Mounting plates This hinge can be mounted only with keyhole mounting plates.

3.165

Hinge cup screws If not pre-mounted

6.9

3.5 15

Legend of hinge cup symbols

820-6308-050 10000 Pcs

Screw-on ready < screws

Machine insertion ready

Premounted euro screws

Âˇ F lat hinge arm allows minimal required gap between refrigerator and cabinet side.

Door adjustment

Side adjustment +3/-0mm

Height adjustment +2/-2mm

Depth adjustment +4/-0mm

Concealed Hinges

For further explanation > see pages 3.20-3.23

Mounting details

Mounting plate drilling distance

min 12 S

D=0

min 15

L=37 min 17

37/28

Drawings show application on D=0mm thick mounting plate

Door clearance For further explanation > see page 3.12

0.3

0.5

0.7

1.0

1.3

1.7

2.5

0.3

0.5

0.7

0.9

1.2

1.6

2.1

0.3

0.5

0.7

0.9

1.2

1.5

2.0

FMIN

Gap ZMIN=0

3.166

Push Latch

For wood doors and drawers

Push latch

915-0X59 >

381

Push latch

915-0320 >

381

Linear m. plate

915-4175 >

381

Cross m. plate

915-4183 >

381

Push latch

Item number

915-0X59-381-K1 Push latch

+ 200 Sets 915-0X59-381-K2 + 200 Sets

Cross mounting plate

200 Pcs

Linear mounting plate

Made of steel and plastic

Fixing screws for mounting plates

6.3 L

Euro screws

821-6323-050 10000 Pcs

3.167

7.5

4 12

Chipboard screws

Bronze

Spring force N (loaded)

Push

Spring force N (released)

Push

Concealed Hinges

· Works with standard concealed hinges and drawers · Effortless opening with just a light touch · Depth adjustment ensures reliable closing and consistent performance in cases of inaccurate drilling · ‘Safety click’ feature for easy detachment of the mechanism from the mounting plate

Drilling pattern

Dimensions

Minimum gap required

22 Depth adjustment

+4.5 / -1mm

37 Ø6

16.5

Ø5

Ø6

Positioning

Close to the ‘touch opening point’ on the side opposite to hinges

On the cabinet side; gap between drawer and cabinet side = min 12mm

On the drawer bottom; in the middle of drawer

Push latch works with standard hinges. Push latch works on drawer; the gap between the drawer and the cabinet side = min. 12 mm

3.168

Cover Caps

For hinge arms

Titus recommends!

Technical details

S-type B-type

4000 Pcs

Plate type

Material/ surface

Item number

Nickel plated

To improve appearance Titus recommends the use of hinge arm cover plates with all compatible concealed hinges.

Titus

steel

248-1646 >

050

neutral

steel

248-1712 >

050

Titus

steel

728-1286 >

054

neutral

steel

728-1283 >

054

Made of steel

T-type

For T-type 110 0mm, 110/45 17mm, 110/90 17mm

5000 Pcs

Made of steel

T-type

5000 Pcs

3.169

Made of steel

Titus

steel

728-1287 >

054

neutral

steel

728-1284 >

054

For T-type 110 5mm, 9mm, 17mm

3.170

Concealed Hinges

Other Functional Fittings

SA)

Drawer Solutions 17mm Drawer Slide · Runners are paired in one piece moulding · The guide rail steers the drawer and reduces jamming risk · Integral drawer stop and hole plugs · Manufactured in HDPE to provide a smooth glide action

17mm slide pair

Item number

192

05179 >

846 886

260

05364 >

886

288

05184 >

846

288

*05201 >

846

*American market only Slide

Stop

One set consists of: · 2 pcs slides · 2 pcs stops

from back edge of drawer 80

for stop setting 32

Ø5x7.5

offset from groove edge Ø8x7.5

17x6 nominal groove size

3 nominal gap between drawer side and cabinet side C 288 288 11

Ø8x7

192

100 Sets

4.3

Made of plastic

Powder grey

Technical and mounting details

Neutral

C-length

Drawer Solutions Drawer Front Adjuster (DFA) Multi-direction adjustment Locking screw to fasten Independent of drawer system One piece housing

Other Functional Fittings

· · · ·

Adjustment range 2mm

Item number

DFA housing

White

Technical and mounting details

Nickel

Before After

Black

Dark brown

2mm

06308

831

877

*06310

831

877

*06309

831

877

*00033

Ø20 11

Ø20

2500 Pcs

Made of plastic

DFA housing

Ø25 11

847

*American market only

Ø25

*06309 does not include screw

2500 Pcs

Made of zinc, plastic 00900

Runner wheel

831 835

877

10 for hole Ø8

Ø16 20

B=B1=32

4000 Pcs

Ø 8 x 11

Made of plastic

4.4

Technical and mounting details

Black

Adjustable Cabinet Leg Range Leg Top Fixes

Item number

Rivet fix 24

Ø15x12

regular

02560

835

heavy duty

*02630

835

* American market only 34 x 34 24

Ø15x12

ØA x D

34 x 34

200 Pcs

Made of plastic

34 x 34 24

ØA x D

Socket fix (knock in)

02558

835

02559

835

34 x 34 34 x 34 24 24 32

Ø15x12 Ø10x12.5

34 34 x x 34 34 32

200 Pcs

Made of plastic

32 24 32

Ø10x12.5 ØA x D

Socket fix (screw on) 32 34 x 34 32 32 24

32 34 x 34

200 Pcs

Made of plastic

Ø10x12.5

4.5

(4 screws) screw on

Leg top

(4 dowels + lip) dowel/lip

34 x 34

(4 screws + lip) screw/lip 24

2 dowels/2 screws

ØA x D

100 Pcs

Made of plastic

Rivet fix/skid

Ø15x12 21 34 x 34

38.5 34 x 34

dowels

ØA x D

screw on

Other Functional Fittings Item number

Black

Drilling distance

Ø15x12

Drilling depth

Technical and mounting details

Drilling diameter

· Lip provides additional support to end panel and gives extra strength · The side fix has twin dowel mounting for positive location · Rivet fix design gives quick fastening of socket · Choice of dowel or screw on sockets · Invert second clip for corner plinth fixing

64 x 64

02575

835

12.5

64 x 64

02582

835

64 x 64

02579

835

10/3

12.5/6 64 x 64

*02669 >

835

64 x 64

*02671 >

835

12.5

64 x 64

*02672 >

835

* Asian market only When using leg top, you must use foot with 01373 clip > see page 4.6

835

*02642 >

835

02663

34 x 34

34 x 34 Ø10x12.5

24 32

32 34 x 34

200 Pcs

Made of plastic Ø10x12.5

Rivet fix/ no rivet

32 32

* Asian market only 32

200 Pcs

Made of plastic

4.6

Adjustable Cabinet Leg Range Adjustable Leg, Extension and Foot

· Legs are supplied assembled at a pre-set height · Wide adjustment range to fit all common plinth heights · Jacking point adjustment feature · Simple push on design to sockets

Adjustable leg

60-90

02570

835

92-152

02549

835

92.5-150

*02666

835

92-150

*02648 >

835

125-185

*02653 >

835

big foot

92-150

*02699 >

835

big foot

125-185

*02706 >

835

Item number

Black

Technical and mounting details

Fitting height adjustment

Drilling distance

* Asian market only

100 Pcs (02570) 200 Pcs

Made of plastic

Ø76

2569

Leg extension

02571

835

02569

835

*02574 >

835

24 2571

50 Ø48

200 Pcs

Made of plastic

Fixed foot

2569

Ø76

38.5

200 Pcs

Made of plastic

2571

50 Ø48

4.7

* American market only

Adjustable Cabinet Leg Range Plinth Clips and Fox Clip

Item number

01373

Fox clip

4 4

1371 1371 1371

1371

Made of plastic

Plinth clip 38 screw

7 7

4 4

32 32

444

Made of plastic

38.5

835

*02710 >

835

* Asian market only 1371 2578 2578

4 38.5 38.5 38.5

02578 32

4 4

500 Pcs

1371

2578 2578

2578

38.5

38.5 38.5

Plinth clip 24 knock on

32 32 32 7

3244

32 32

02523

24 24

Made of plastic

38.5 24

835

32 32 32 32

2578 2523, 2634 2523, 2634 2523, 2634

600 Pcs

846

4 4

1000 Pcs

Black

Technical and mounting details

Natural

Other Functional Fittings

· Spring design eliminates the need for drilling and fits into any position on plinth · The screw in version can sit in variable plinth positions · When taking plinth around the corner, the fitting is reversible.

2578

38.5 38.5

2523, 2634

24 24 32 32

Plinth clip 24 screw on

02634

835

2523, 2634

24 24

600 Pcs

Made of plastic

2523, 2634

4.8

Shelf Supports

Item number

336-3553

Without pin (rock-in)

Zinc

Technical and mounting details

Nickel plated

· Shelf supports are made of zinc, steel or plastic · Teeth on mounting pin prevent rotation and fallout of the fitting · Screw-on and glass shelf versions are available

650

15 14

Ø5

1000 Pcs

Made of zinc *01851 >

Structural shelf support

Ø10

1851

* American market only Ø5

14.5 14

847 885

14.5 9

4 7.5

3000 Pcs 2 pins (rock-in)

Made of zinc Ø5

1852

336-3552 >

7.5

5.5

10 Ø5

Ø5

Ø5 7

7.5

6 336.3552_nosilec polic

7.5

5.5

5 Ø5

8.5

1000 Pcs

Made of zinc 336-3174

Pin Ø5x8 (rock-in)

Ø5

8 19

Ø5

12 8.5

1000 Pcs

4.9

Made of zinc

650

Shelf Supports

12.8

Other Functional Fittings

16.3

· Hold down feature traps the shelf in place for security · Folding design allows the shelf to be post mounted in an assembled cabinet · To suit a wide range of shelf thicknesses · Pad for metal shelf support when using glass

Shelf support (push-in)

01825

8 6.5

1825 zamak

1851 1851 1820 - plastic ??

2000 Pcs

14.5 14.5 14 Made of zinc 14

Ø5 x D1

Shelf support (push-in) 7

18521852

5.5 5.5

10 10 7

7.5 7.5

7.57.5 Ø5 x 8.5 Ø5 x 8 Ø5 Ø5

14 14

01852

Made of zinc

Shelf holddown (for use with 01825)

B 19

Silver

7.5 7.5

5.5 5.5 Ø5 Ø5

5.55.5 5 5

55 7.57.5

861

Ø5 x D1

Shelf support retainer

12.8

Made of plastic 42

B D 1837 15 1838 16 8 1843 19

B D 1837 15Ø5 x 1838 16 8 1843 19

42 12

8.5

Ø5 x 8.5 12

8 6.5

11.5

6.5

12.5

1.5 11.5

4000 Pcs of1.5 plastic 5000 Pcs (01837)1820 -Made plastic ?? 1820 - plastic ??

12.8x 8 Ø5

16.3

1825 zamak

1010

01822

1825 zamak

32 32

16.3

12000 Pcs

847

Ø5 x D1 7.5 Ø5 x D1 7.5

2000 Pcs

1010

14.5 14.5

Ø5 Ø5 9 9

Ø5 x 8.5 Ø5 x D1

Ø10 Ø10

12.5

Ø5 Ø5

847 885

Ø5 x 8.5

11.5 15 1.5 15

White

Item number

Zinc

Technical and mounting details

Nickel

B D 1837 15 1838 16 8 1843 19

Clear

01837

01838

*01828

01823

01829

01843

877 830 877 830

877 861 877

830

* American market only Other colours on request

Ø5 x D1

12.5

19 Ø5 x 8

4.10

Shelf Supports

Item number

Pin Ø5x10 (screw-on)

338-3687

Nickel plated

Technical and mounting details

Zinc plated blue

Mounting procedure:

650

15.7

1000 Pcs

Made of zinc

For glass shelves (rock-in)

Ø 12

338-9721 >

860

338-3686

650

01912

847

9.5

1000 Pcs

7.8

Made of zinc and plastic

Pin Ø5x10 (rock-in)

12 15.7

1000 Pcs

Made of zinc

Shelf support Ø3mm with pin 7.5 7.5

5000 Pcs

4.11

Made of zinc

2.5

Ø5

Ø3

Ø5

Ø3

19.3

21 21

Item number

7.8

Shelf support with pin

9.5

7.8

1910

20.5

1910

20.5

01910

847

01911

847

6.5 6.5

Ø5 Ø5

10 10

2000 Pcs Shelf support 22 7.8 22

1911

14.5

1911

14.5

7.8 5

Ø5 8

2000 Pcs

Ø5 10

334-6073

040 050

335-6076

040

7.5 Ø4.8

Ø4.8

Ø5

7.5

8.5

5000 Pcs

Made of steel

Ø4.8

Ø5

5000 Pcs

Made of steel

080

8.5

4.12

Other Functional Fittings

Antique brass plated

9.5

Nickel plated

Technical and 22 mounting details

Zinc plated blue

Shelf Supports

No-Tools Backfix and Trimfix™

Hardboard Backfix

02154

01370

01709

Zinc plated

Phosphate

Item number

Corrosil

Technical and mounting details

sys202154/app

Zinc

· Push Backfix into panel · No tools required to lock the Backfix panels together · The handle on Backfix acts as a stop during locking, providing greater accuracy and speed of insertion · Barbs on the Backfix provide a quality fastener for rigid cabinet construction

885 897

3 / 3.5

Ø12 x 10

9 min

1000 Pcs

Made of zinc

sys2002154/drill

Trimfix™

Trim

852

4/4.4 Ø3 min 10

2000 Pcs

Made of various material

Screw panhead No 8 x 17.6

15000 Pcs

4.13

Made of zinc

883

Your authorized dealer Titus Group www.titusplus.com TitusHardware 05.1 Eng Jan18

Drawing shows glass clips mounting example.

Glass clip

359-4201

340

359-4302

340

9.5

359-4223

340

353-3649

650

353-3650

650

11 16.5 24

16.5 24

25000 Pcs

3.3

Ø 3.6

Item number

Transparent

Technical and mounting details

Nickel plated

Pin length

Made of plastic

Rear wall connector long

max.5

max.5 max.5 max.5

LEC HRBTI[^A - sistem 32 353.3649

NOSILEC HRBTI[^A - sistem 32 353.3649

8.5

15 4.4

Ø10 Ø10 10 15 15 15

4.4

7 7

8.5 8.5

28 37 37

500 Pcs

353.3650

Ø5

max.5 max.5 max.5 max.5

15 15

10 Ø10 Ø10 10 15

8.5 8.58.5 8.5

14 18

Ø5

14 18

500 Pcs

Ø5 28

Made of zinc

Rear wall connector short

NOSILEC HRBTI[^A NOSILEC HRBTI[^A 353.3650

28 15 15 15 28 37

8.5

5 Ø5 5

Made of zinc

4.14

Other Functional Fittings

Glass Clip Rear Wall Connectors

Panel Brackets

Item number

90° Bracket (screw-in/rock-in peg) 10

2111 2111

2111 12 2111 2111

12 4 12

2110 2110

12 124

12 4 12 4

17 16

12 16 12

16 7 5 16 12 12 4 5 127

2110 2110 2110 2133 2133

10 10

4.15

847 885

02133

885

9 9

10 10

Ø5

Ø5 Ø5

Ø5

Ø5 Ø5

11 11

6 6

Ø5

2133 2133 2133

9 9

2133 2133 2133

Made of zinc

6 6 9 6

Ø5 Ø5

Ø5

9 9

Ø5

Ø5 Ø5

9 9

1000 Pcs

02110

Ø5

847 885

Ø5

15 10 15 Ø5 Ø5 10 15 Ø5

Ø5

02111

12 12 11 5 7 15 16 5 7 11 15 516 7 16 12 4 1211 15 11 12 4 12 11 15 12 4 12 15 85 7 12 5 12 7 8 5 7 Ø5 11 12 8 12 15 Made of 12 zinc12 8 11 Ø5 15 8 12 11 6 15 6 Ø5 12 Ø5 12 9 Ø5 12 12 68 9 612 12 8 12 6 8 12 9 12 12 9 Ø5 12 9 Ø5 1212 Ø5 12 6 6 6 9 12 9 12 9 12

2110 2110 2110

1000 Pcs

8 8

10 8 10 15 15 Ø5 8 Ø5

2111 2111 Made of zinc 1217 2111 161712

90° Bracket (screw-in)

Corner bracket (rock-in)

17 17 12 12

12 12

1000 Pcs

15 10

Zinc

Technical and mounting details

Nickel plated

· To be used to fix face frames to carcases without additional drilling to cabinet · Designed for carcase side panel of 18mm thickness · Edge to hole centre = 28mm · Easier fixing of frames due to parts that remain in holes once inserted

Technical and 15 mounting details

Item number

19.3

Rail

339-7047 32

0.6

Standard length is 3m. Other lengths available upon special request > see page 0.3

Made of chrome plated steel

Rail support 3-holes

Standard length 3m

10 Pcs

060

Ø5

19.3 15

Nickel plated

Chrome plated

337-3710

650

337-3711

650

19.3 15 15 32

Ø5

Made of zinc

15 9.5

Rail support 2-pins

19.3 48

325

200 Pcs

19.3

9.5

3232 32 15 15

15 53

65.5

Ø5

Made of zinc

200 Pcs

19.3

9.5

Rail support M6

9.5

337-3709

19.3

65.5

32 32 53

19.3

9.5 M6

Made of zinc

200 Pcs

4.16

Other Functional Fittings

Wardrobe Rail Rail Supports

Item number

339-7041

Rail

Nickel plated

Technical details

Chrome plated

Wardrobe Rail Ă˜18

060

18 0.7

Standard length is 3m. Other lengths available upon special request > see page 0.3

337.1398

10 Pcs

Made of steel, chrome plated 337-1398

Screw-on under a shelf

050

8.5 22

21.5

Ă˜5.2

64.5 32

M6 screw supplied separately: 815-6354-040 16

300 Pcs

4.17

Made of steel

1000 Pcs

Rigid and strong No pre-drilling Spacer pegs provide an even 2mm gap Sleek design

Item number

Technical details

3.5

360-1230

054

3.5

85 105 85 105 20 43

20 43

3 3 Ø4.5 Ø4.5

Recommended number per panel width

054

3.5

Joining plate 43mm

1000 Pcs

Ø4.5

Made of steel

360-1222

Joining plate 105mm

500 Pcs

Nickel plated

· · · ·

3.5

Made of steel Nr. of joining plates 4 3 2

500 800 1200 panel width (mm)

4.18

Other Functional Fittings

Joining Plates

The Titus Group Profile

Titus Group

Titus focuses on the design, manufacture and distribution of connectors, concealed hinges drawers and soft closing mechanisms in furniture and household appliances.

1973 Titus established

2005 Titusonic ultrasound fastening technology

2017 Launch of T-type full hinge programme

5.4

Titus Group is owned and managed from its headquarters in United Kingdom. We are able to provide products and services to every customer around the world based on manufacturing facilities in Europe, North America, China, SE Asia, Australia and New Zealand.

1975 Revolution in particleboard panel processing productivity

2006 Merger with Lama d.d. Launch of Glissando

1977 Titus launches concealed cabinet connector

2007 Titus becomes Titus+ Specialist in precision components’ engineering

Quickﬁt technology makes Titus the World leader in connectors for RTA furniture

1980 Titus USA office and manufacturing established

2009 Damper’s development and engineering

1990 Inovative Quickfit technology launched

2014 Acqusition of Tekform, Australia

Vision

Mission

The world’s best engineering for precision components

To provide manufacturers with components’ solutions that improve competitiveness

Titus Business Philosophies and Principles · Gain total knowledge of our customers and their markets · Focus on identifying and creating high volume component niches · Meet our customers’ expectations with global consistency · Build long term associations with customers, suppliers, colleagues and shareholders · Invest in the abilites of individuals at every level · Continuously enhance input efficiency and sustainability

mp on

Connectors

Drawers

Assembly systems

ies

Dampers

log

Tooling

isi

Die casting

Damped components

Damped hinges

Titusonic FastFit

Furniture Hardware

Components

Technologies

· Cabinet connectors · Concealed hinges · Soft closing systems · Drawers and drawer systems · Kitchen accessories · Furniture locks · Decorative

· Dampers · Precision components

· Automation systems · Precision castings · Die cast technologies · Tooling · Ultrasound fastening technology · FastFit technology

5.4

‘Totally Integrated Engineering’

Product Design Design and engineering of unique components Consistent and repeatable product quality

Manufacturing Technologies

Manufacturing Operations

to improve productivity and product quality

A wide array of technologies and services required for high volume production of precision components available in-house

ies

log

ing

tur

ign

fac

nu Ma

Precision Components

Die casting

Forging

Combi casting

Surface treatment

Conventional casting

Heat treatment

Stamping

Assembly

Moulding

Packing

Manufacturing Operations

Fittings for purpose Unique product advantages for better value for money and lower ‘total installed cost’

5.5

Innovations that improve with less parts, less different parts, less preparation actions, faster assembly

Fast time-to-market

Quality

Continuous Improvement The Titus Group Mission, to improve the competitiveness of our customers, encourages us to continuously improve our products, services, processes and competencies of our employees.

Quality

Products

We believe that the Titus Mission is achieved most effectively through the management of our design, manufacturing and service activities in conformance with the ISO 9001 standard for quality management. Quality has a broad meaning for us: it is our guide to the selection of materials, work, processes, internal relations and cooperation with partners.

Our integrated quality system produces technically optimized products of high quality. They are assessed regularly in our own test labs as well as by internationally renowned institutions, such as LGA from Germany, CTBA from Frawnce, FIRA from United Kingdom, CATAS from Italy, AIDIMA from Spain, and others.

5.6

5.7

Global Sales, Distribution and Engineering Support Slovenia

United Kingdom

Titus, Dekani

Titus International, London

TitusPlus, Dekani Titus Technologies, Dekani/ Lama Automation, Dekani

Titus Tool Company, Sherburn in Elmet

Spain

United States

Titus Tool Company, Chicago

Titus SZ Components, Shenzen

Titus Polska, Poznań

TitusPlus Iberia, Barcelona

Titus Tool Company, Seattle

China

Poland

Croatia

Singapore

CRO LAMA Zagreb

Italy

Titus Tool Company, Singapore

TitusPlus Italia, Treviso

Indonesia PT Titus Tekform Indonesia, Tangerang Selatan

Headquater Distribution point

Australia Production

Titus Tekform, Sydney

Titus Tekform, Townsville

Titus Tekform, Tasmania

Titus Tekform, Newscastle

Titus Tekform, Melbourne

Titus Tekform, Canberra

Titus Tekform, Brisbane

Titus Tekform, Wodonga

Titus Tekform, Perth

New Zealand

Stefano Orlati Enterprises, Christchurch

Europe TitusPlus d.o.o. Dekani 5 SI-6271 Dekani, Slovenia +386 566 90 213 +386 566 90 205 Fax info@titusplus.com Titus d.o.o. Dekani Dekani 5 SI-6271 Dekani, Slovenia +386 566 90 213 +386 566 90 205 Fax info@titusplus.com Titus Technologies Lama Avtomatizacija d.o.o. Dekani 5 SI-6271 Dekani, Slovenia +386 566 90 146 info@titusplus.com Titus Tool Company Ltd. 10 Blackburn Industrial Estate Enterprise Way Sherburn in Elmet LS256NA, United Kingdom +44 1977682 582 +44 1977680 481 Fax uk@titusplus.com CRO LAMA d.o.o. Rakitska 10a Rakitje HR-10437 Bestovje Croatia +385 1 3323 033 +385 1 3323 233 Fax croatia@titusplus.com Titus Polska Sp. z .o.o. ul. Stefańskiego 17 A PL-62-002 Suchy Las/Poznań Poland +4861 811 5402 Phone/Fax +4861 811 5684 Phone/Fax +4861 821 9362 poland@titusplus.com

Stefano Orlati Enterprises, Auckland

TitusPlus Italia S.r.l. Via Aquileia 9 Frazione Olmi 31048 San Biagio di Callalta (TV) +39 04 221 650 120 +39 04 221 650 136 Fax italia@titusplus.com TitusPlus Iberia S.L.U. C/ Luxemburg 16, 08520 Les Franqueses del Valles +34 938 715 404 +34 670 349 774 Mobile iberia@titusplus.com www.titusplusiberia.com

America Titus Tool Co. Inc. 2800 156th Avenue SE Suite 135 Bellevue, WA 98007, USA 800 762 1616 toll free +1 425 746 2080 +1 425 746 2344 Fax usa@titusplus.com Titus Tool Co. Inc. 220 Messner Drive US-60090 Wheeling, USA 800 762 1616 toll free +1 253 872 2829 +1 253 872 2827 Fax usa@titusplus.com

Australia Titus Tekform Pty Ltd Unit 1, 41-43 Whyalla Place Prestons NSW 2170 Australia +61 2 9286 0007 +61 2 9826 0074 Fax www.titustekform.com.au info@titustekform.com.au

Stefano Orlati NZ 34 Waipareira Avenue Henderson Auckland, New Zealand +64 9 837 0886 +64 9 837 8003Fax www.titustekform.com.au info@titustekform.com.au

Asia Titus Tool Co. Pte. Ltd. 5004 Ang Mo Kio Ave 5 Techplace II #04-01 Singapore 569872 +656383 3922 +656383 3178 Fax singapore@titusplus.com Titus Shenzhen Components Co. Ltd 1st Floor, Building No.2, Heng Changrong High-tech Industrial Park ShangNan South Road Shangjin Street Baoan District Shenzhen Province PRC +86 755 8348 0916 +86 8359 2676 Fax china@titusplus.com PT Titus Tekform Indonesia Taman Tekno Blok L2 / 7 BSD Sektor XI - Tangerang 15314 Indonesia T. +62 21 7587 3578 F. +62 21 7587 3574 Indonesia@titusplus.com

Headquarters Titus International Ltd 325 Euston Road London NW1 3AD, United Kingdom info@titusplus.com www.titusplus.com info@titusplus.com

5.8

Index

Item number

Page

Item number

Page

Item number

Page

Item number

Page

00021

1.19

02560

4.5

05576

1.45

06387

1.56

00022

1.19

02569

4.7

05579

1.45

06395

1.54

00033

4.4

02570

4.7

05580

1.45

06397

1.54

00062

1.9

02571

4.7

05586

1.44

06401

1.50

00068

1.9

02574

4.7

05587

1.44

06402

1.50

00071

1.9

02575

4.6

05578

1.45

06403

1.50

00072

1.9

02578

4.8

05592

1.38

06405

1.50

00171

1.9

02579

4.6

05608

1.40

06406

1.50

00177

1.9

02582

4.6

05609

1.40

06408

1.49

00180

1.8

02630

4.5

05610

1.40

06410

1.49

00900

4.4

02634

4.8

05611

1.40

06411

1.52

01020

1.9

02642

4.6

05644

1.44

06412

1.52

01029

1.65

02648

4.7

05652

1.44

06413

1.51

01042

1.9

02653

4.7

05653

1.44

06414

1.51

01056

1.9

02663

4.6

05654

1.44

06415

1.52

01370

4.13

02666

4.7

05656

1.44

06416

1.51

01373

4.8

02669

4.6

05657

1.44

06431

1.53

01709

1.12, 4.13

02671

4.6

05658

1.44

06433

1.53

01732

1.12

02672

4.6

05659

1.44

06435

1.53

01822

4.10

02699

4.7

05675

1.44

06437

1.53

01823

4.10

02706

4.7

05676

1.44

06439

1.54

01825

4.10

02710

4.8

05677

1.44

06441

1.54

01828

4.10

02985

1.12

05678

1.44

06443

1.54

01829

4.10

03090

1.16

05679

1.44

06445

1.54

01837

4.10

03118

1.16

05714

1.34

06447

1.53

01838

4.10

03121

1.16

05751

1.38

06449

1.53

01843

4.10

03150

1.16

05752

1.38

06451

1.53

01851

4.9

03168

1.16

05753

1.38

06453

1.53

01852

4.10

03180

1.16

05757

1.38

06455

1.54

01910

4.12

03181

1.16

05772

1.38

06457

1.54

01911

4.12

05129

1.34

05774

1.38

06459

1.54

01912

4.11

05137

1.34

05775

1.38

06461

1.54

02046

1.12

05179

4.3

05778

1.38

06464

1.55

02075

1.13

05184

4.3

05786

1.40

06465

1.55

02077

1.13

05201

4.3

05787

1.40

06470

1.55

02107

1.20

05314

1.33

05857

1.38

06471

1.55

02110

4.15

05364

4.3

05858

1.38

06472

1.55

02111

4.15

05380

1.38

05859

1.38

06473

1.55

02120

1.20

05388

1.33

05860

1.39

06479

1.49

02130

1.20

05409

1.59

05917

1.62

06495

1.50

02133

4.15

05410

1.59

05959

1.38

06803

1.18

02139

1.20

05414

1.35

05960

1.62

06806

1.18

02141

1.20

05441

1.33

05971

1.62

06813

1.18

02144

1.20

05453

1.33

06073

1.13

06839

1.18

02154

4.13

05474

1.33

06074

1.9

06947

1.58

02161

1.19

05503

1.33

06077

1.9

06949

1.57

02182

1.64

05552

1.34

06080

1.9

06951

1.58

02190

1.19

05554

1.34

06308

4.4

06953

1.57

02193

1.19

05556

1.34

06309

4.4

09406

1.43

02523

4.8

05563

1.34

06310

4.4

09423

1.36

02549

4.7

05570

1.34

06381

1.56

09424

1.36

02558

4.5

05574

1.45

06383

1.56

09430

1.37

02559

4.5

05575

1.45

06385

1.56

09435

1.36

5.9

Index

Item number

Page

Item number

Page

Item number

Page

Item number

Page

09443

1.36

244-0344-050

3.114

244-0S68-050

3.154

248-0327-050

3.89

09456

1.36

244-0561-050

3.116

244-0T14-650

3.154

248-0328-050

3.89

09491

1.43

244-0562-050

3.116

244-0T28-050

3.154

248-0366-050

3.89

09495

1.42

244-0565-050

3.116

244-0T40-050

3.154

248-0377-050

3.85

09533

1.42

244-0566-050

3.116

244-0V19-050

3.116

248-0400-050

3.89

09536

1.42

244-0567-050

3.116

244-0V50-050

3.156

248-0401-050

3.89

09537

1.42

244-0568-050

3.116

244-0V64-050

3.154

248-0402-050

3.89

09583

1.36

244-0655-050

3.165

244-0Z26-050

3.116

248-0431-050

3.99

09588

1.36

244-0810-650

3.129

244-0Z51-050

3.116

248-0433-050

3.99

09592

1.36

244-0813-650

3.139

244-0Z63-050

3.116

248-0482-050

3.89

09594

1.36

244-0846-050

3.165

244-1136-050

3.116

248-0487-050

3.89

09597

1.37

244-0848-650

3.163

244-1137-050

3.116

248-0518-050

3.99

09631

1.43

244-0866-050

3.154

244-1138-050

3.116

248-0532-050

3.89

09651

1.32

244-0867-050

3.154

244-1139-050

3.116

248-0533-050

3.89

09652

1.32

244-0907-650

3.163

244-1228-050

3.116

248-0534-050

3.89

09690

1.41

244-0914-650

3.154

244-1229-050

3.116

248-0535-050

3.89

09692

1.41

244-0929-050

3.154

244-1233-050

3.116

248-0536-050

3.89

09695

1.41

244-0930-050

3.154

244-1234-050

3.116

248-0537-050

3.89

09699

1.41

244-0965-050

3.154

244-1645-050

3.116

248-0538-050

3.89

241-0043-650

3.163

244-0B12-650

3.154

244-3016-650

3.116

248-0539-050

3.89

241-0050-650

3.163

244-0C32-650

3.139

244-3600-650

3.118

248-0540-050

3.89

244-0036-650

3.156

244-0D46-650

3.163

244-3603-650

3.118

248-0545-050

3.89

244-0062-650

3.154

244-0D47-650

3.163

244-3651-650

3.116

248-0547-050

3.89

244-0063-650

3.154

244-0D99-650

3.163

244-3653-650

3.118

248-0549-050

3.89

244-0067-650

3.154

244-0E02-650

3.163

244-3654-650

3.118

248-0551-050

3.89

244-0068-650

3.154

244-0G19-050

3.154

244-3655-650

3.118

248-0665-050

3.97

244-0085-650

3.116

244-0H64-050

3.154

244-7314-050

3.162

248-0675-050

3.97

244-0095-650

3.116

244-0H65-050

3.154

244-7315-050

3.162

248-0677-050

3.97

244-0118-050

3.116

244-0K95-050

3.154

244-7316-050

3.162

248-0742-050

3.103

244-0119-050

3.116

244-0K96-050

3.154

244-7318-050

3.162

248-0745-050

3.103

244-0120-050

3.116

244-0K97-650

3.154

244-7324-050

3.162

248-0748-050

3.103

244-0134-050

3.116

244-0K98-650

3.154

244-7325-050

3.162

248-0C66-050

3.93

244-0135-050

3.116

244-0L26-050

3.154

244-7326-050

3.162

248-0G49-050

3.131

244-0136-050

3.116

244-0L29-050

3.154

244-7328-050

3.162

248-0G50-050

3.131

244-0137-050

3.116

244-0L37-650

3.154

248-0080-050

3.93

248-0G51-050

3.131

244-0166-050

3.116

244-0L38-650

3.154

248-0160-050

3.147

248-0G52-050

3.133

244-0167-050

3.116

244-0L39-050

3.154

248-0161-050

3.147

248-0G53-050

3.139

244-0175-650

3.154

244-0L40-050

3.154

248-0162-050

3.109

248-0G54-050

3.131

244-0232-650

3.154

244-0L50-050

3.154

248-0163-050

3.109

248-0G55-050

3.131

244-0258-050

3.114

244-0L98-050

3.154

248-0171-050

3.89

248-0G56-050

3.131

244-0259-050

3.114

244-0M28-650

3.154

248-0172-050

3.89

248-0G57-050

3.133

244-0260-050

3.114

244-0M29-650

3.154

248-0186-050

3.89

248-0G58-050

3.139

244-0261-050

3.114

244-0M33-650

3.116

248-0188-050

3.89

248-0G59-050

3.131

244-0262-050

3.114

244-0P24-050

3.154

248-0197-050

3.89

248-0G60-050

3.131

244-0263-050

3.114

244-0P25-050

3.154

248-0198-050

3.107

248-0G61-050

3.131

244-0264-050

3.114

244-0P26-050

3.116

248-0255-050

3.139

248-0G62-050

3.133

244-0265-050

3.114

244-0P27-050

3.116

248-0274-050

3.85

248-0G63-050

3.139

244-0266-050

3.114

244-0P28-650

3.139

248-0279-050

3.89

248-0G79-050

3.131

244-0270-050

3.114

244-0P29-650

3.116

248-0280-050

3.89

248-0G80-050

3.131

244-0271-050

3.114

244-0P41-650

3.154

248-0283-050

3.101

248-0G81-050

3.131

244-0272-050

3.114

244-0S65-050

3.154

248-0285-050

3.101

248-0G82-050

3.133

244-0342-050

3.114

244-0S66-050

3.154

248-0291-050

3.101

248-0G83-050

3.139

244-0343-050

3.114

244-0S67-050

3.154

248-0308-050

3.111

248-0K10-050

3.165

5.10

Index

Item number

Page

Item number

Page

Item number

Page

Item number

Page

248-0K40-050

3.131

248-0T80-050

3.149

277-4355

1.65

700-0KF4-054

3.68

248-0K76-050

3.131

248-0T81-050

3.149

278-4129

1.21

700-0KW0-054

3.70

248-0L04-050

3.131

248-0T93-050

3.85

279-9187

1.22

700-0KW3-054

3.70

248-0L27-650

3.135

248-0T94-050

3.85

279-9465

1.22

700-0LB0-650

3.68

248-0L28-050

3.137

248-0T95-050

3.85

334-6073

4.12

700-0LB2-650

3.68

248-0L32-650

3.135

248-0U13-050

3.149

335-6076

4.12

700-0LB3-650

3.68

248-0L33-050

3.137

248-0U14-050

3.149

336-3174

4.9

700-0LC0-650

3.68

248-0L46-050

3.137

248-0U16-050

3.111

336-3552

4.9

700-0LC2-650

3.68

248-0L51-050

3.145

248-0U21-050

3.111

336-3553

4.9

700-0LC3-650

3.68

248-0L61-050

3.103

248-0U22-050

3.111

337-1398

4.17

700-0LF0-650

3.68

248-0L63-050

3.131

248-0V14-050

3.91

337-3709

4.16

700-0LF2-650

3.68

248-0L70-050

3.137

248-0V15-050

3.111

337-3710

4.16

700-0LF3-650

3.68

248-0L71-050

3.135

248-0V18-050

3.95

337-3711

4.16

700-0NA0-054

3.70

248-0L72-050

3.133

248-0V39-050

3.91

338-3686

4.11

700-0NA1-054

3.70

248-0L73-050

3.139

248-0V40-050

3.91

338-3687

4.11

700-0NA2-054

3.70

248-0M41-050

3.165

248-0V41-050

3.91

338-9721

4.11

700-0NA3-054

3.70

248-0M73-050

3.107

248-0V42-050

3.91

339-7041

4.17

700-0NA4-054

3.70

248-0M74-050

3.107

248-0V43-050

3.91

339-7047

4.16

700-0NB0-054

3.70

248-0M83-050

3.135

248-0V45-050

3.95

353-3649

4.14

700-0NB1-054

3.70

248-0M84-050

3.137

248-0V47-050

3.95

353-3650

4.14

700-0NB2-054

3.70

248-0N12-050

3.97

248-0V48-050

3.95

359-4201

4.14

700-0NB3-054

3.70

248-0N13-050

3.97

248-0V49-050

3.95

359-4223

4.14

700-0NB4-054

3.70

248-0N14-050

3.97

248-0V53-050

3.139

359-4302

4.14

700-0NC0-054

3.70

248-0N16-050

3.99

248-0V56-050

3.85

360-1222

4.18

700-0NC1-054

3.70

248-0N17-050

3.99

248-0V62-050

3.93

360-1230

4.18

700-0NC2-054

3.70

248-0N18-050

3.99

248-0V65-050

3.107

408-3166

1.63

700-0NC3-054

3.70

248-0N20-050

3.101

248-0V66-050

3.139

408-3391

1.63

700-0NC4-054

3.70

248-0N21-050

3.101

248-0V69-050

3.85

408-3423

1.63

700-0NE0-054

3.70

248-0N22-050

3.101

248-0V70-050

3.85

408-3424

1.63

700-0NE1-054

3.70

248-0N24-050

3.103

248-0V71-050

3.85

700-0KA0-054

3.68

700-0NE2-054

3.70

248-0N25-050

3.103

248-0V72-050

3.85

700-0KA1-054

3.68

700-0NE3-054

3.70

248-0N26-050

3.103

248-0Z20-050

3.111

700-0KA2-054

3.68

700-0NE4-054

3.70

248-0N38-050

3.135

248-0Z29-050

3.95

700-0KA3-054

3.68

700-0NF0-054

3.70

248-0N62-050

3.103

248-0Z81-050

3.103

700-0KA4-054

3.68

700-0NF1-054

3.70

248-0P43-050

3.145

248-1646

3.169

700-0KB0-054

3.68

700-0NF2-054

3.70

248-0R09-050

3.165

248-1712

3.169

700-0KB1-054

3.68

700-0NF3-054

3.70

248-0R10-050

3.145

249-7301-050

3.157

700-0KB2-054

3.68

700-0NF4-054

3.70

248-0R11-050

3.145

249-7302-050

3.157

700-0KB3-054

3.68

701-0A96-650

3.43

248-0R12-050

3.145

249-7303-050

3.159

700-0KB4-054

3.68

701-0A98-650

3.43

248-0R13-050

3.107

249-7304-650

3.159

700-0KC0-054

3.68

701-0AS0-054

3.29

248-0R14-050

3.107

275-0103

1.61

700-0KC1-054

3.68

701-0AS1-054

3.29

248-0R15-050

3.107

275-0106

1.61

700-0KC2-054

3.68

701-0AS4-054

3.29

248-0R17-050

3.107

275-2030

1.60

700-0KC3-054

3.68

701-0AT0-054

3.29

248-0R18-050

3.107

275-2057

1.61

700-0KC4-054

3.68

701-0AT1-054

3.29

248-0S05-050

3.145

275-2058

1.61

700-0KE0-054

3.68

701-0AT4-054

3.29

248-0S06-050

3.145

275-2146

1.61

700-0KE1-054

3.68

701-0B08-650

3.41

248-0S69-050

3.107

275-2209

1.60

700-0KE2-054

3.68

701-0B10-650

3.41

248-0T10-050

3.85

275-3096

1.60

700-0KE3-054

3.68

701-0BS0-054

3.29

248-0T13-050

3.85

275-4034

1.65

700-0KE4-054

3.68

701-0BS1-054

3.29

248-0T69-050

3.85

275-4035

1.64

700-0KF0-054

3.68

701-0BS4-054

3.29

248-0T70-050

3.85

275-4058

1.64

700-0KF1-054

3.68

701-0BT0-054

3.29

248-0T71-050

3.85

276-4036

1.64

700-0KF2-054

3.68

701-0BT1-054

3.29

248-0T72-050

3.85

277-4225

1.65

700-0KF3-054

3.68

701-0BT4-054

3.29

5.11

Index

Item number

Page

Item number

Page

Item number

Page

Item number

Page

701-0C54-650

3.41

702-0B09-650

3.57

702-0FK4-054

3.61

951-0P59-050

2.15

701-0C56-650

3.41

702-0BK0-054

3.45

702-0FL0-054

3.61

951-0P63-050

2.15

701-0C78-650

3.41

702-0BK1-054

3.45

702-0FL1-054

3.61

951-0X94-050

2.15

701-0C80-650

3.41

702-0BK4-054

3.45

702-0FL4-054

3.61

954-0147-650

3.123

701-0CS0-054

3.31

702-0BL0-054

3.45

702-0GK0-054

3.63

954-0148-650

3.125

701-0CS1-054

3.31

702-0BL1-054

3.45

702-0GK1-054

3.63

954-0149-650

3.129

701-0CS4-054

3.31

702-0BL4-054

3.45

702-0GK4-054

3.63

954-0153-650

3.123

701-0CT0-054

3.31

702-0C53-650

3.57

702-0GL0-054

3.63

954-0154-650

3.125

701-0CT1-054

3.31

702-0C55-650

3.57

702-0GL1-054

3.63

954-0158-650

3.127

701-0CT4-054

3.31

702-0C77-650

3.57

702-0GL4-054

3.63

954-0159-650

3.129

701-0D30-650

3.43

702-0C79-650

3.57

702-0UK0-054

3.49

954-0164-650

3.77

701-0D32-650

3.43

702-0CK0-054

3.47

702-0UK1-054

3.49

954-0165-650

3.79

701-0D36-650

3.43

702-0CK1-054

3.47

702-0UK4-054

3.49

954-0168-650

3.127

701-0D38-650

3.43

702-0CK4-054

3.47

702-0UL0-054

3.49

954-0226-050

3.75

701-0D64-650

3.35

702-0CL0-054

3.47

702-0UL1-054

3.49

954-0227-050

3.75

701-0D66-650

3.35

702-0CL1-054

3.47

702-0UL4-054

3.49

954-0228-050

3.73

701-0D70-650

3.35

702-0CL4-054

3.47

721-0PK0-650

3.65

954-0229-050

3.73

701-0D72-650

3.35

702-0D29-650

3.59

721-0PK1-650

3.65

954-0230-050

3.75

701-0D76-650

3.35

702-0D31-650

3.59

721-0PK4-650

3.65

954-0B97-050

3.121

701-0D78-650

3.35

702-0D35-650

3.59

721-0PL0-650

3.65

954-0B98-050

3.121

701-0D82-650

3.39

702-0D37-650

3.59

721-0PL1-650

3.65

954-0B99-050

3.121

701-0D84-650

3.39

702-0D63-650

3.51

721-0PL4-650

3.65

954-0C01-050

3.121

701-0D88-650

3.39

702-0D65-650

3.51

728-1283

3.169

954-0C02-050

3.121

701-0D90-650

3.39

702-0D69-650

3.51

728-1284

3.169

954-0C03-050

3.121

701-0D98-650

3.39

702-0D71-650

3.51

728-1286

3.169

954-0E05-050

3.75

701-0DS0-054

3.31

702-0D75-650

3.51

728-1287

3.169

954-0E09-650

3.77

701-0DS1-054

3.31

702-0D77-650

3.51

729-0K71-054

2.15

954-0E10-650

3.79

701-0DS4-054

3.31

702-0D81-650

3.55

825-7561

1.21

954-0E11-650

3.81

701-0DT0-054

3.31

702-0D83-650

3.55

827-4013

1.10

954-0E12-650

3.83

701-0DT1-054

3.31

702-0D87-650

3.55

827-4130

1.10

954-0E13-050

3.75

701-0DT4-054

3.31

702-0D89-650

3.55

827-6201

1.10

954-0E14-650

3.81

701-0E32-650

3.39

702-0D97-650

3.55

827-6202

1.10

954-0E15-650

3.83

701-0E52-650

3.37

702-0DK0-054

3.47

915-0007-050

3.87

954-0E16-050

3.73

701-0E54-650

3.37

702-0DK1-054

3.47

915-0012-050

3.87

954-0E17-050

3.73

701-0E58-650

3.37

702-0DK4-054

3.47

915-0032-050

3.87

954-0U81-050

3.75

701-0E60-650

3.37

702-0DL0-054

3.47

915-0320

3.167

972-0420

2.19

701-0E64-650

3.37

702-0DL1-054

3.47

915-0X59

3.167

972-0X19

2.21

701-0E66-650

3.37

702-0DL4-054

3.47

915-0Z85-050

3.87

972-0X34

701-0US0-054

3.33

702-0E18-650

3.55

915-0Z96-050

3.87

973-4451

701-0US1-054

3.33

702-0E51-650

3.53

915-4175

3.167

972-4564

2.19

701-0US4-054

3.33

702-0E53-650

3.53

915-4183

3.167

972-4565

2.19

701-0UT0-054

3.33

702-0E57-650

3.53

915-7016-380

3.87

972-4566

2.19

701-0UT1-054

3.33

702-0E59-650

3.53

915-7022-380

3.87

973-0M99

2.25

701-0UT4-054

3.33

702-0E63-650

3.53

915-7105-050

3.87

973-0X35

2.23

702-0A95-650

3.59

702-0E65-650

3.53

915-7109-050

3.87

973-0X39

2.27

702-0A97-650

3.59

702-0EK0-054

3.61

926-0A26-050

3.151

973-0X95

2.27

702-0AK0-054

3.45

702-0EK1-054

3.61

926-0A27-050

3.151

973-4125

2.27

702-0AK1-054

3.45

702-0EK4-054

3.61

950-0464-050

3.143

973-4126

2.27

702-0AK4-054

3.45

702-0EL0-054

3.61

950-0465-050

3.143

973-9018

2.29

702-0AL0-054

3.45

702-0EL1-054

3.61

950-0466-050

3.143

973-9060

2.31

702-0AL1-054

3.45

702-0EL4-054

3.61

950-0T26-050

3.141

702-0AL4-054

3.45

702-0FK0-054

3.61

950-0T27-050

3.105

702-0B07-650

3.57

702-0FK1-054

3.61

951-0F15-650

2.17

2.21 2.23, 2.25

5.12

Titus Group

Published on Jul 12, 2018

Titus Furniture Fittings Systems 2018

Our comprehensive catalogue of cabinet connectors, concealed hinges, furniture damping systems and more.

Titus Furniture Fittings Systems 2018

Published on Jul 12, 2018

Our comprehensive catalogue of cabinet connectors, concealed hinges, furniture damping systems and more.

titusplus

Go explore