MATERIAL SAFETY D A T A S H E E T A Z E K® TRIMBOARDS
1. PRODUCT IDENTIFICATION MANUFACTURING SITE: ADDRESS: TRADE NAME: SYNONYMS: CAS NUMBER(S): TELEPHONE NO.:
Vycom Corporation 801 Corey Street, Moosic, PA 18507 Polyvinyl Chloride (PVC, Vintec I, Vintec II, Celtec, AZEK®.) sheet and trim. Vinyl Polymers 9002-86-2 (570) 346-8254
2. COMPONENTS A N D HA Z A R D CLASSIFICATION PVC Polymer: Inert Fillers:
70 - 95% 0 - 30%
Heat Stabilizer: Lubricants:
0 - 2% 0 - 4%
Process Aids: Impact Modifiers: Colorants: Chemical Blowing Agents:
0 0 0 0
-
2% 10% 2% 1%
CaCO3, TiO2 Organotin Compounds Calcium Stearate; Parafin, Polyethylene, Polyamide compounds, or Esters Acrylic compounds CPE, ABS, MBS or Acrylic Compounds Organic and Inorganic Azo Compounds or Sodium Bicarbonate
This product is an article as defined in 29 CFR 1910.1200. It will not result in exposure to hazardous chemicals under normal conditions of use. This product is not subject to the reporting requirements of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of 1986 and 40 CFR Part 372.
3. PHYSICAL D A T A BOILING POINT (˚F): SPECIFIC GRAVITY (H20=1): VAPOR PRESSURE (mm Hg.): MELTING POINT: SOLUBILITY IN WATER: VAPOR DENSITY: APPEARANCE AND ODOR:
Solid 0.45 - 1.4 Solid Decomposes before melting Solid Solid Finished Sheet.
4. FIRE A N D EXPLOSION D A T A FLASH POINT (TEST METHOD): AUTOIGNITION TEMPERATURE: FLAMMABLE LIMITS IN AIR. % BY VOL. LOWER: UPPER: EXTINGUISHING MEDIA: SPECIAL FIRE FIGHTING PROCEDURES:
UNUSUAL FIRE AND EXPLOSION HAZARD:
Not applicable Not applicable Not applicable Not applicable Water spray(fog), foam, dry chemical, or CO2 Cool exposed equipment with water spray. Use selfcontained breathing apparatus if fighting fire in confined spaces. PVC evolves hydrogen chloride, carbon monoxide, and other toxic gases when burned. Exposure to combustion products may be fatal and should be avoided.
Page 1 of 4