Repairing your pool heater after a storm

Repair your Swimming Pool Heater after a Storm

Repairing Your Pool Heater after a Storm Pool heaters undergo numerous problems due to the storms, which can result in a number of issues. From electrical shortages to hail, anything can cause problems for your pool heater. Frequently, we get enquiry from people asking – How to repair the pool heater? The first thing that you should do is to identify the particular problem and then look if you can solve the problem yourself or get the assistance of a professional.

Kindly Note: Never try to open the parts of your pool heater and refrain from performing any electrical work yourself. Right away, call a professional technician if you think the issue is an electrical or internal one.

If you discover that your pool heater is not working properly after a storm, there are certain things you should be checking to start with.

Brownouts Similar to blackout, but houses still tend to obtain a certain amount of electricity. You’ll perhaps observe that your lights come on and your

devices that require low energy start functioning, but your pool heater may not start. During and directly after a storm, brownouts normally happen.

You can probably inspect for these by looking at the streetlights and your neighbours’ homes – Now, if they have lights but they’re dim, then it’s almost a power grid problem, which is not isolated to your particular home.

However, you should verify your local energy distributor’s website to obtain any new updates. In case you’ve experienced a brown out, your heater should be working properly once the brownout issue is rectified.

Power Inputs Safety switchboard should be checked. It might not be the case, but we have come across some instances where customers just observed a few days after the storm and missed to verify their safety switch or forgot to reset the tripped safety switch. It may be uncommon, but it’s simple to check, which can save service charges in case it happens to be the problem. It may sound crazy, but you need to inspect all switches that connect to the controller are switched on, which includes power point, switchboard, and on the device itself – all simple fixes, which can increase your time in a heated pool.

Hail & Storm Damage In case, you have witnessed hail damage, you may have observed that your pool is not starting or heating, or is malfunctioning. This can often happen when hail damage hits the equipment that is installed on the roof.

Additionally, it can happen if your controller gets struck. As the hail damage is normally caused from physical power and your heater may be damaged, it is recommended not to operate the heater unless it is examined by a professional. This is particularly relevant for the solar heaters in which water flows through a series of pipes located on the roof. It can result in leakage if damaged solar heater is operated, which is not the right thing to do when the equipment is installed on the roof. So, never operate damaged solar heater.

Just let your pool heater to function for a few hours Suppose, you don’t face any of the issues mentioned above and that your pool heater is working perfectly, then you may provide the heater a few hours to heat up after a storm. One thing to observe is that rainwater that comes inside the pool at the time of a storm intermingled with the fact that the Sun is normally blocked (applies particularly for solar pool heaters), will typically cool off your pool in a natural way. This functions against the heater and, if you have switched off your pool heater in the anticipation of the storm, you require providing it sometime so that it can heat up your pool once again.

Source: http://www.thermopools.com.au/blog/repairing-your-pool-heater-after-astorm/ **********