SYSTEM SETUP & OPERATION
USER’S GUIDE
4.5.1.2 Extend the Telescopic Overhead Spooling Arm The overhead spooling arm is telescopic. Ensure that it is in the work position (extended) before beginning wireline operations. IMPORTANT: This procedure is easiest to perform with two workers. Have one stationed inside of the Recorder Cabin at the operator control panel, and the other stationed in the drawworks area.
1. In the drawworks area, remove the pins securing the measuring head to its cradle.
2. In the Recorder Cabin, from the Left-Hand Control Panel, check the system AIR PRESSURE gauge to ensure there is air pressure. 3. Slowly turn the OVERHEAD SPOOLER control towards the RAISE position to lift the arm out of the measuring head bracket.
MN-161 REV 0 60
Š LEE SPECIALTIES, 2016