Am690uu0011 dual openhole packoff electronic copy by The Alberta Writer

DUAL OPENHOLE PACKOFF ASSEMBLY NUMBER: AM690UU0011

USER ’S GUIDE

Revision Information Revision Rev 0

Date Released March 2016

Description of Changes Changes to document layout

SME(s)/Reviewer(s)/Approver(s) Melvin Enriquez

Disclaimer Lee Specialties has made every effort to ensure that this document contains accurate and current information. This document is intended to be used in conjunction with a complete training program and on-site supervision. Lee Specialties does not warrant or guarantee that the information contained herein is either complete or accurate in every respect. The reader hereby protects, indemnifies and holds harmless Lee Specialties together with its officers, employees and agents from and against all liability for personal injury, death or property damage to any person arising directly or indirectly from the use by the reader of the information contained in the document.

Contact Information If you have any questions that are not covered by the contents of this manual please let us know:

Head Office & Manufacturing - CANADA

Main Office & Manufacturing - USA

7883 Edgar Industrial Way, Red Deer, Alberta, Canada T4P 3R2

5119 Hiltonview Drive. P.O. Box 691693, Houston TX 77086 USA

Telephone: 1.403.346.4487

Telephone: 1.281.519.1719

Fax: 1.403.347.3312

Fax: 1.281.587.0865

Business Hours: Monday to Friday, 08:00 16:00 (Mountain Standard Time - MST)

Business Hours: Monday to Friday, 08:00 - 16:00 (Central Daylight Time - CDT)

General information: info@leespecialties.com (24-hour service)

General information: infousa@leespecialties.com (24-hour service)

website: www.leespecialties.com

Confidential This document and the proprietary information herein are the property of Lee Specialties. It shall not be disclosed nor copied, in whole or in part, without the written consent of Lee Specialties. Unauthorized transmission, reproduction, transcription, or retrieval system storage in any form is prohibited.

USER’S GUIDE

TABLE OF CONTENTS

Table of Contents Section 1: About This Document .................................................................................. 1 1.1 Video Tutorial for the 3D Tool Bar......................................................................................... 1

Section 2: Safety ............................................................................................................. 2 Section 3: Description & Specifications ....................................................................... 4 3.1 Description .............................................................................................................................. 4 3.1.1 Interactive 3D Model........................................................................................................ 5 3.2 Specifications.......................................................................................................................... 6

Section 4: Product Installation & Operation................................................................. 7 4.1 Pre-Operation Assembly ........................................................................................................ 7 4.2 Pressure Testing ..................................................................................................................... 8 4.3 Function Testing ..................................................................................................................... 8 4.4 Operation. ................................................................................................................................ 9 4.5 Dual Openhole Packoff Seal Housing Transfer.................................................................... 9

Section 5: Maintenance & Troubleshooting ............................................................... 13 5.1 Maintenance Required During Operation ........................................................................... 13 5.2 Maintenance Required After Each Job ............................................................................... 13 5.3 Disassembly .......................................................................................................................... 14 5.3.1 Removal of the Seal Housing Sub................................................................................. 15 5.3.2 Disassembly of the Seal Housing Sub-Assembly.......................................................... 17 5.3.3 Disassembly of the Main Assembly ............................................................................... 21 5.4 Assembly ............................................................................................................................... 26 5.5 Troubleshooting.................................................................................................................... 37

Appendix A: Technical Information ...........................................................................A-1 Accessories List.........................................................................................................................A-2 Spare Parts ................................................................................................................................A-2 Line Size Reference Table ........................................................................................................A-2 Technical Drawings ...................................................................................................................A-2

REV 0 III

USER’S GUIDE

DUAL OPENHOLE PACKOFF

Section 1: About This Document This document contains the following information for the Dual Openhole Packoff:  System/product description and specifications  General safety information  Installation and use information  Maintenance schedules and procedures  Technical drawings with parts information

1.1 Video Tutorial for the 3D Tool Bar Watch the short video to learn how to use the tool bar associated with the interactive 3D model located in “Section 3: Description & Specifications”. Click on the LOADING image below to start the video. For best results, maximize the width of the PDF file you are viewing. See heading “3.1.1 Interactive 3D Model” on page 5.

REV 0 1

USER’S GUIDE

DUAL OPENHOLE PACKOFF

Section 2: Safety All personnel must be aware of the dangers related to the operation and maintenance of well site equipment, as well as to site-specific hazards. The following are critical to well site safety:  The wearing of personal protective equipment (PPE)  Regular safety orientations  Correct use and handling of lifting equipment Hydraulics

Pressurized hydraulic systems store energy capable of exerting extreme force. Serious injuries or even death can occur as a result of improper use or mishandling of such equipment. To minimize the dangers of equipment operation and maintenance:  Perform all required pre-start checks and inspections  Ensure that all lines and hoses are connected correctly to prevent any unintended operation of the equipment  Shut down the equipment and release pressure from the system before performing any kind of maintenance or disconnecting any hydraulic lines  Never use your hands to try and detect a pinhole leak. Always use a piece of wood or cardboard, and wear safety glasses, a face shield, or both The following safety notices have been added to this manual, however these notices do not replace proper training on equipment or well site safety procedures.

REV 0 2

USER’S GUIDE

SAFETY

Environmental

Some of the fluids used in the operation and maintenance of the equipment can be harmful to the environment if not handled correctly. To minimize risk to the environment:  Dispose of waste fluids in accordance with applicable guidelines and regulations  Clean up spilled fluids in accordance with applicable guidelines and regulations  Report spills in accordance with applicable guidelines and regulations to the appropriate authorities Symbol

Definition

DANGER! This symbol and paragraph indicate a risk of serious injury or death to personnel.

WARNING! This symbol and paragraph indicate a risk of severe damage to equipment.

CAUTION: This symbol and paragraph indicate a risk of moderate injury to personnel or damage to equipment.

IMPORTANT: This symbol and paragraph indicate a piece of important information.

NOTE: This paragraph indicates useful information that will allow the user to complete tasks quickly and efficiently.

REV 0 3

USER’S GUIDE

DUAL OPENHOLE PACKOFF

Section 3: Description & Specifications 3.1 Description Figure 3-1: Dual Openhole Packoff

1. Top Line Guide 2. Swivel Hoist Ring 3. Locking Screw

4. Needle Valve & Hydraulic Input 5. 2 in. 1502 Hammer Union

The Lee Specialties, Dual Openhole Packoff is designed to seal around a static wireline cable and is installed on top of a BOP or a shooting nipple. The Dual Openhole Packoff also allows for extra riser/lubricator sections to be safely added to the pressure control stack as required, such as when the well takes a “kick” (is introduced to unexpected pressure). It is also a means of equalizing pressure between the well and the pressure control stack for safe extraction of a tool string. Some of the Packoff’s components are split or slotted to facilitate assembly and operations. After the initial wireline run, the Seal Housing Sub assembly can be lifted by way of the cable head. The Seal Housing Sub remains around the cable while tools are laid down. An air injection line cleaner and line lubrication ports are integral to the top line guide. A hydraulic hand pump is required to operate the Packoff. © LEE SPECIALTIES, 2016

REV 0 4

USER’S GUIDE

DESCRIPTION & SPECIFICATIONS

3.1.1 Interactive 3D Model Click on the image below to see an interactive 3D model. You can use this model to see how the Dual Openhole Packoff works and to order replacement parts. See heading heading “1.1 Video Tutorial for the 3D Tool Bar” on page 1 for a tutorial on how to use the 3D tool bar.

REV 0 5

USER’S GUIDE

DESCRIPTION & SPECIFICATIONS

3.2 Specifications The Dual Openhole Packoff is designed for standard service unless otherwise requested. Please specify line size, connection type, and the diameter that you require when ordering your Dual Openhole Packoff.

SPECIFICATIONS Part Number*

AM690UU0011-XXXX

Part Description

Dual Open-Hole Packoff

Working Pressure

3,000 PSI (20.6 MPa)

Test Pressure

6,000 PSI (41.3 MPa)

Temperature Rating

-20–250°F (-29–121°C)

Inside Diamater

6.375 in. (6.75 in. riser ID)

Weight

381 lb (172.82 kg)

Top Connection

Type-H 9.00 in. -4 (7.50 in.) quick union

Bottom Connection

Type-H 9.00 in. -4 (7.50 in.) quick union

Total Length

43 in. (109.22 cm)

Makeup Length

38.5 in. (97.79 cm)

Well Service

Standard WARNING: This product is not designed for servicing sour wells!

*. The “XXXX” ending in the part number represents wireline diameter in thousandths of an inch. See the “Line Size Reference Table” on page A-2 in “Appendix A: Technical Information” for specific line size part numbers.

REV 0 6

USER’S GUIDE

DUAL OPENHOLE PACKOFF

Section 4: Product Installation & Operation NOTE: Use the technical drawings found in “Appendix A: Technical Information” or the 3D model found in heading “3.1.1 Interactive 3D Model” on page 5 to view part locations and information.

4.1 Pre-Operation Assembly The Dual Openhole Packoff is designed to seal around a static wireline cable and is placed above a BOP or a shooting nipple. NOTE: When you assemble the pressure control stack at the job site, keep all parts clean and protected. Use a piece of wood or other suitable material to keep components off the ground. Install components in the following order: 1. Insert the wireline cable through the top of the Seal Housing Sub (PM690UU0060) and push the cable through the line rubbers and out through the bottom of the assembly. 2. Install the Bottom Line Guide (PM690UU0042), the line rubbers, and the Top Line Guide (PM690UUUU0047) into the union and thread it into the cylinder cap until the Top Line Guide seats over the piston. 3. Continue to thread the line through the other components of the pressure control stack as required. 4. Connect the Dual Openhole Packoff to the equipment below it.

REV 0 7

USER’S GUIDE

PRODUCT INSTALLATION & OPERATION

4.2 Pressure Testing DANGER! When pressure testing the Dual Openhole Packoff, all plugs and connections must have a pressure rating that meets or exceeds 3000 PSI (20.7 MPa). Connections and plugs rated lower than 3000 PSI can result in the plugs and connections shearing and becoming projectiles, which could result in injury or death. IMPORTANT: Follow your organization’s operating requirements and the requirements of local laws, policies, and regulations when pressure testing the Dual Openhole Packoff.

4.3 Function Testing The following procedure explains how to function test the Dual Openhole Packoff. IMPORTANT: The following test procedure does not supersede your organization’s operating requirements. Nor does this test procedures supersede the requirements of local laws, policies, or regulations. Required Parts: 

Test Rod (Lee part number: PM655UU0381)

1. Thread the bottom nut over the Test Plug (PM655UU00381). 2. Plug the two inch figure 1502 side port. 3. Thread in the test rod. NOTE: Select the correct test rod size by matching it to the size of the line rubber (see the “Line Size Reference Table” heading in Appendix A: Technical Information on page A-2) for more information.) 4. Connect a hand pump to the hydraulic input that is located under the Needle Valve. 5. Open the Needle Valve. 6. Use the hand pump to function the Dual Openhole Packoff closed and open.

REV 0 8

USER’S GUIDE

PRODUCT INSTALLATION & OPERATION

4.4 Operation. Use this procedure when the wireline is not moving. 1. Install the Dual Openhole Packoff as required in the pressure control stack. NOTE: Installation is usually above a BOP or a shooting nipple. 2. Connect a hydraulic hose between the Dual Openhole Packoff input connector (located under the Needle Valve) and a hand pump. 3. At the hand pump, turn the thumbscrew clockwise. This enables the hand pump to build pressure. 4. Stroke the pump handle to apply enough pressure to the line rubbers to form a secure seal around the wireline cable. 5. When you are ready to continue operations, turn the thumbscrew counter-clockwise to release pressure on the line rubbers.

4.5 Dual Openhole Packoff Seal Housing Transfer Use this procedure when lubricators/risers need to be added during operations. Required Tools:  

Ratcheting wrench 3/4 inch socket for Lockdown Screws

1. Ensure that the Dual Openhole Packoff (lower packoff) is engaged.

REV 0 9

USER’S GUIDE

PRODUCT INSTALLATION & OPERATION

2. Cut the wireline cable making sure that is of a sufficient length to exit the top of the Upper Packoff while leaving enough length to connect a lifting device to the top of the cable. 3. Thread the wireline cable through the pressure control stack and through the Upper Packoff.

4. Function the Upper Packoff closed. 5. Equalize pressure between the top and bottom section of the Lower Packoff by releasing the Bottom Packoff seal. NOTE: Other ways of equalizing pressure may be used.

REV 0 10

USER’S GUIDE

PRODUCT INSTALLATION & OPERATION

6. Close the Lower Packoff needle valve.

7. Once pressure is equalized, use a 3/4 inch socket to disengage all four Lockdown screws by turning them counter-clockwise.

REV 0 11

USER’S GUIDE

PRODUCT INSTALLATION & OPERATION

8. Lift the tool string together with the Seal Housing Sub. CAUTION: Do not use an impact wrench on the Lockdown Screws. Using an impact can result in stripped threads.

REV 0 12

USER’S GUIDE

DUAL OPENHOLE PACKOFF

Section 5: Maintenance & Troubleshooting Follow maintenance schedules closely to help ensure safety and tool functionality.

5.1 Maintenance Required During Operation 



Inspect the Dual Openhole Packoff line rubbers at every opportunity. Replace them if they are damaged or worn. Inspect the upper and lower line guides every tenth run. Replace them if they are damaged or worn. CAUTION: A misaligned wireline cable can cause uneven wear to the line guides.

5.2 Maintenance Required After Each Job 

 

Disassemble the Dual Openhole Packoff and clean all parts. Inspect for wear and corrosion. Replace all seals. Inspect the body paint and repair if necessary. NOTE: Paint helps to prevent corrosion and deterioration.

REV 0 13

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5.3 Disassembly Personal Protective Equipment: 

Safety gloves Safety glasses



Steel-Toed safety boots



Notes    

Set the assembly upright on an even and clean working area. It is ideal to have a stump to facilitate this procedure. Disassemble and clean the Packoff after each job. If you must disassemble the Packoff at the job site, keep all parts clean and protected. Use a piece of wood or other suitable material to keep components off the ground.

Tools Required          

Open-Hole Packoff Tool, P/N: PM690MI0065 Allen Key set 15/16” wrench 3/4” wrench O-ring pick Strap wrench Chain vise Sling Rubber mallet Pry bar DANGER! NEVER perform any maintenance, repair, or troubleshooting procedures while the equipment is under pressure.

REV 0 14

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5.3.1 Removal of the Seal Housing Sub 1. Use a 3/4 in. socket and ratchet to disengage all four Lockdown Screws (PM690UU0061) securing the Seal Housing Sub (PM690UU0060) to the Top Sub (PM690UU0059).

2. Using an Allen key, remove the screws securing the Top Line Guide assembly (PM690UU0009 & PM690UU0010) and remove the Line Guide.

3. Attach the Open-Hole Packoff extractor tool (PM690UU0065).

REV 0 15

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

4. Slightly loosen the Retaining Nut (PM690UU0051) to create enough clearance to retract the Seal Housing Sub. 5. Tighten down the screws on the Extractor Tool to pull out the Seal Housing assembly.

6. Repeat steps 4 and 5 until the Seal Housing Sub is fully retracted with the seal disengaged.

7. Unthread and remove the Retaining Nut (PM690UU0051).

REV 0 16

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

8. Lift the Seal Housing Sub assembly up and out of the main assembly.

5.3.2 Disassembly of the Seal Housing Sub-Assembly 1. Secure the Seal Housing Sub Assembly in a chain vise. Use rag as a cushion so that the chain does not damage the surface.

REV 0 17

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

2. Attach the Extractor/Packoff Tool (PM690UU0065).

3. Using the Openhole Packoff Tool, remove the Top Line Guide Retainer (PM690UU0046). 4. Remove the Hard Rubber insert (PM679UU0042-XXXX).

REV 0 18

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5. Remove the Rubber Ring (PM690UU0012).

6. Remove the Bottom Line Guide (PM690UU0043-XXXX).

7. Remove the Bottom Guide Weldment (PM690UU0055).

REV 0 19

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

8. Remove the Elastomer retainer (PM690UU0048).

9. Remove the Energizing Elastomer (PM690UU0038).

10. Inspect all the components for wear, corrosion and damage. Replace parts as required. WARNING! Do not re-use O-rings as it is difficult to correctly gauge damage and wear. Doing so may compromise the integrity of the seal.

REV 0 20

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5.3.3 Disassembly of the Main Assembly 1. Using an Allen key, remove the socket head cap screws securing the four Lockdown Pin Retainers (PM690UU0062) to the Top Sub (PM690UU0059).

2. Carefully, use a pry bar to remove all four of the Lockdown Pin Retainers from the Top Sub. CAUTION: Be careful not to damage the sealing surface of the retainer.

REV 0 21

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

3. Place each of the Lockdown Screw Retainers into a vise and then disassemble the Lockdown Screws (PM690UU0061). Inspect the Screws and the Retainers for damage and wear, replace as necessary.

4. Secure the main assembly in a chain vise. NOTE: Make sure to use a vise capable of handling the assembly’s weight of 381 lb (127.8 kg).

REV 0 22

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5. Use an Allen key, to remove the bottom union nut collar set screws (PM950SB0037-16-037).

6. Remove the bottom union Stop Collar nut (PM655UU0061).

7. Remove the bottom union nut (PM655UU0014).

REV 0 23

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

8. Secure the Bottom Sub in a vise and unthread the Top Sub (PM690UU0059) from the Bottom Sub (PM690UU0063).

9. Carefully remove the Top Sub from the vise and set it upright on a workbench. 10. Carefully remove the four cap screws securing the Guard (PM690UU0064) to the Top Sub.

REV 0 24

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

11. Slide the Guard down and off of the Top Sub.

12. Remove the Needle Valve (PM515SD0034) and valve fittings.

13. Remove the Hoist Rings (PM810UU0031).

14. Inspect all components for wear, corrosion, and damage. Replace damaged components as required.

REV 0 25

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5.4 Assembly Notes    

Assemble all components that shows no sign of damage or excessive wear Replace all O-rings. Never re-use O-rings Lubricate O-rings and all sealing surfaces for smooth assembly. Apply an anti-seize/thread compound to all threaded connections. IMPORTANT: Refer to the technical drawing(s) in “Appendix A: Technical Information” for component information/location.

1. Install and position all O-rings and backup O-rings as per the technical the drawings. 2. Use an Allen key to screw the two Hoist Rings (PM810UU0031) into the Top Sub (PM690UU0059).

Use cap screws with flat and lock washers to attach the Pin Guard (PM690UU0064) to the Top Sub.

REV 0 26

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

4. Secure the Top Sub in a chain vise.

5. Insert an O-ring (PM933RG2367) into the Top Sub and then use a strap wrench to thread the Bottom Sub (PM690UU0063) into the Top Sub. NOTE: Using a pipe support for the Bottom Sub will facilitate assembly.

6. Assemble the nut (PM655UU0014) and nut stop collar (PM655UU0061) to the bottom sub.

REV 0 27

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

7. Secure the Stop Collar using an Allen key to install the four set screws.

8. Insert the two inch figure 1502 seal (PM934RG0005) in the side port.

9. Carefully remove the assembly from the vise then place it upright on even ground. NOTE: It is ideal to secure the assembly on a stump. 10. Insert an O-ring (PM933RG2223) on to the Pin Retainer stump and insert an O-ring in the Pin Retainer channel; now assemble the Lockdown Pin Retainer (PM690UU0062) and the Lockdown Screw (PM690UU0061).

REV 0 28

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

11. Attach the Lockdown Screw sub-assembly to the Top Sub using two Cap screws.

12. Ensure that the Lockdown Screws are in the retracted position and are clear of the bore.

13. Attach the Needle Valve (PM515SD0034) and the hydraulic fittings to the Top Sub.

REV 0 29

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

14. Assemble the Seal Housing Sub assembly. a. Secure the Seal Housing Sub (PM690UU0060) in a chain vise. NOTE: Use rag to prevent damaging the contact surface.

b. Install O-ring (PM933RG2438) between two backup O-rings (PM933RD8438).

REV 0 30

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

c. Install O-ring (PM933RG2436) between to backup O-rings (PM933RD8436).

d. Insert the Energizing Elastomer (PM690UU0038) into the Seal Housing Sub.

e. Insert the Sealing Elastomer Retainer (PM690UU0048) with the Oring (PM933RG2350) into the Housing Sub.

remove the housing sub from the vise.

REV 0 31

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

15. Insert the Housing Sub into the Top Sub using the alignment guide marks. This ensures that the Lockdown Screws are aligned with their associated threaded holes. NOTE: You may need to use a rubber mallet to tap the Housing Sub in to position.

16. Tighten all four Lockdown Screws to secure the Housing Sub in position.

REV 0 32

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

17. Insert the Bottom Guide Weldment (PM690UU0055).

18. Install the Bottom Line Guide (PM690UU0043-XXXX).

REV 0 33

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

19. Insert the Packoff Rubber Ring (PM690UU0012).

20. Insert the Packoff Hard Rubber (PM679UU0042-XXXX) in to the Rubber Ring.

REV 0 34

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

21. Use an Allen key and four cap screws to secure the Top Line Guide Retainer (PM690UU0046) to the Top Line Guide (PM690UU0047).

22. Using the Openhole Packoff Assembly Tool (PM690UU0065), tighten the Top Line Guide Retainer (assembled in the step above) into the Seal Housing Sub and tighten the nuts until the end surfaces are flush.

REV 0 35

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

23. Using four cap screws, install the Top Line Guide (PM690UU0009 and PM690UU0010) to the Top Line Guide Retainer (PM690UU0046).

24. Thread the Retaining Nut (PM690UU0051) on to the Top Sub.

25. Thread the line lubrication fittings into the sides of the Top Line Guide.

REV 0 36

USER’S GUIDE

MAINTENANCE & TROUBLESHOOTING

5.5 Troubleshooting PROBLEM No noticeable resistance against line rubbers when functioned with the hydraulic hand pump. Loss of hand pump hydraulic oil.

Hydraulics are operating correctly, but a seal cannot be achieved.

POSSIBLE CAUSE(S)   

POSSIBLE SOLUTION(S)

Hand pump is malfunctioning Check the hand pump for damage Needle valve is not open and replace as necessary. Hand pump requires hydraulic Ensure that the needle valve is oil fully open. Add hydraulic oil to the hand pump reservoir.



The Energizing Elastomer (PM690UU0038) is not compressing properly causing the hydraulic oil to leak out of the system

Tighten the Top Line Guide Retainer (PM690UU0046) using the Openhole Packoff Tool (PM690UU0065), tighten the Top Line Guide Retainer into the Seal Housing Sub until the end surfaces are flush.

Wrong size of line rubber is installed Excessively worn line rubber

Replace the line rubber with the correctly sized rubber for the line in use. Replace the worn line rubber with a new line rubber.

REV 0 37

USER’S GUIDE

TECHNICAL INFORMATION

Appendix A: Technical Information

This appendix contains the following information for the Dual Openhole Packoff: 

Spare parts list



Assembly part number/line size reference table



Technical drawings

REV 0 A-1

USER’S GUIDE

TECHNICAL INFORMATION

Accessories List Part Description

Part Number

Hand Pump

AM813UU0038

Hydraulic Hose

AM506-A04-01010300Q1MF

Lub C-Wrench (ID = 10.0 in.)

PM652UU1515-100A

Seal Housing Extractor/Assembly Tool

PM690UU0065

Test Cap

AM655UU0265

Test Plug

PM655UU00381

Spare Parts Part Description

Part Number

Bottom Line Guide*

PM690UU0043-XXXX

Top Line Guide

PM690UU0047-XXXX

Two-Piece Hard Rubber

PM679UU0042-XXXX

Packoff Rubber Ring

PM690UU0012

Packoff Energizing Elastomer

PM690UU0038

Two in. Figure 1502 Seal

PM934RG0005

Seal Kit

AM690RK0011

*. The “XXXX” ending in the part number represents wireline diameter in thousandths of an inch. See the reference table below for specific line size part numbers.

Line Size Reference Table Line Size (in inches)

XXXX Size Designation

Part Number

1/4

0250

AM690UU0011-0250

9/32

0281

AM690UU0011-0281

5/16

0313

AM690UU0011-0313

3/8

0375

AM690UU0011-0375

7/16

0438

AM690UU0011-0438

15/32

0469

AM690UU0011-0469

Technical Drawings The technical drawings show all parts, including O-rings and back-up rings. The technical drawings are located on the following pages. © LEE SPECIALTIES, 2016

REV 0 A-2

AM690UU0011-XXXX REV 0 ITEM QTY PART NUMBER 1 1 PM690UU0059 2 1 PM690UU0060 3 1 PM690UU0063 4 1 PM690UU0051 5 1 PM655UU0014 6 1 PM655UU0061 7 1 PM655UU0110 8 4 PM690UU0061 9 4 PM690UU0062 10 1 PM690UU0038 11 1 PM690UU0012 12 1 PM690UU0048 13 1 PM679UU0042−XXXX 14 1 PM690UU0046 15 1 PM690UU0047−XXXX 16 1 PM690UU0043−XXXX 17 1 PM690UU0055 18 1 PM690UU0010 19 1 PM690UU0009 20 1 PM690UU0064 21 4 PM933RG2215 22 4 PM933RG2223 2 23 PM933RG2367 24 1 PM933RG2350 25 1 PM933RG2438 26 2 PM933RD8438 27 1 PM933RG2436 28 2 PM933RD8436 29 1 PM934RG0005 30 1 PM512UU0002 31 2 PM512UU0001 32 2 PM553SD4A/4A 33 8 PM951MS050−13−150 34 10 PM951SB025−20−062 35 4 PM951SB037−16−125 36 4 PM950SB037−16−037 37 4 PM952MS063−11−125 38 4 PM954MS063 39 4 PM953MS063 40 1 PM515SD0034 41 1 PM553UU0753 42 2 PM810UU0031 43 1 PM553SD8B−4A

DESCRIPTION Dual Openhole Packoff 3K 6.375" Type H 9.0"−4(7.5") Top Sub Dual Openhole Packoff 3K Seal Housing Sub Dual Openhole Packoff 3K 6.375" Type H 9"−4(7.5") Bottom Sub Retaining Nut NUT 5K 6−5/8" H 9.0"−4(7.5") NUT 5K 6 5/8" Type H 9.00"−4(7.50") Stop Collar TP 5K 6−5/8" H 9.0"−4 (7.5") Pin Dual Openhole Packoff Lockdown Screw Dual Openhole Packoff Lockdown Pin Retainer Open Hole Packoff Energizing Elastomer Open Hole Packoff Rubber Ring Sealing Elastomer Retainer 2 Piece "Hard" Rubber Top Line Guide Retainer Open Hole Packoff Top Line Guide Open Hole Packoff Bottom Line Guide Open Hole Packoff Bottom Guide Weldment Open Hole Packoff − Top Line Guide Screw Side Open Hole Packoff − Top Line Guide Hole Side Dual Openhole Packoff Guard − Weldment O−Ring HSN 80 2−215 O−Ring HSN 80 2−223 O−Ring HSN 80 2−367 O−Ring HSN 80 2−350 O−Ring HSN 80 2−438 Backup O−Ring Nitrile 90 8−438 O−Ring HSN 80 2−436 Backup O−Ring Nitrile 90 8−436 2" Weco 1502 Rubber Seal Fitting Hyd Coupler 1/4" Female Parker x FNPT Fitting Hyd Coupler 1/4" Male Parker x FNPT Adapter, Nipple 1/4"NPT Male x 1/4"NPT Male (Parker) Socket Head Cap Screw 1/2"−13 UNC x 1.5" A574 *Varies* Cap Screw 3/8−16 UNC x 1.25" SS SetScrew 3_8−16 UNCx0.375 5/8 −11 X 1.25 UNC GR 8 HEX HEAD CAPSCREW 5/8" GR8 Lockwasher 5/8" GR8 Flatwasher Needle Valve 10K 1/2" MNPT x 1/2" FNPT Angle SS Straight 4K #8MNPT x #4MNPT Steel Hex Swivel Hoist Ring Crosby HR−125 #1016887 WLL 800 lbs Fitting 15K 1/2" FNPT x 1/4" MNPT SS

7 6 5

20 33

22 1

29 39

41 40

SEAL HOUSING SUB SEE "PAGE 2"

Material Spec:

34 31 35

Dual Openhole Packoff 3K 6.375" Type H 9.0"-4(7.50") Drawing:

19 32

7739 Edgar Industrial Way Red Deer, Alberta Canada T4P 3R2 Ph # (403) 346-4487

Lee Specialties

Process Spec:

Revision:

AM690UU0011-XXXX

Sheet:

1 of 2

Designer: MSE Date: 3/4/2015 Status: Released Appr'd By: GF Approved Date: 12/1/2015 Weight: 382 lbmass Drawn By: Checked By: GF MSE Check Date: 12/1/2015 0 Prototype 11/24/2015 MSE Unless Otherwise Indicated: All Dimensions in Inches. 125 rms Finish Min. REV. DESCRIPTION DATE APPROVED Decimal Tolerances: x.xxx `0.005 Concentricity: 0.005 TIR REVISION HISTORY x.xx `0.01 Fractional Tolerances: `1/16 Exclusive Property Of Lee Specialties Considered Confidential And May Not Be Copied Or Reproduced Without Written Consent Of Lee Specialties Limited Lee Rev 9 Ledger

AM690UU0011-XXXX REV 0 ITEM QTY PART NUMBER 10 1 PM690UU0038 11 1 PM690UU0012 12 1 PM690UU0048 13 1 PM679UU0042−XXXX 14 1 PM690UU0046 15 1 PM690UU0047−XXXX 16 1 PM690UU0043−XXXX 17 1 PM690UU0055 24 1 PM933RG2350 25 1 PM933RG2438 26 2 PM933RD8438 27 1 PM933RG2436 28 2 PM933RD8436 34 10 PM951SB025−20−062

DESCRIPTION Open Hole Packoff Energizing Elastomer Open Hole Packoff Rubber Ring Sealing Elastomer Retainer 2 Piece "Hard" Rubber Top Line Guide Retainer Open Hole Packoff Top Line Guide Open Hole Packoff Bottom Line Guide Open Hole Packoff Bottom Guide Weldment O−Ring HSN 80 2−350 O−Ring HSN 80 2−438 Backup O−Ring Nitrile 90 8−438 O−Ring HSN 80 2−436 Backup O−Ring Nitrile 90 8−436 *Varies*

12 24

15 14

Material Spec:

7739 Edgar Industrial Way Red Deer, Alberta Canada T4P 3R2 Ph # (403) 346-4487

Lee Specialties

Process Spec:

SEAL HOUSING SUB-ASSEMBLY Dual Openhole Packoff 3K 6.375" Type H 9.0"-4(7.50") Drawing:

Revision:

AM690UU0011-XXXX

Sheet:

2 of 2

AM690UU0011-XXXX REV 0 DUAL OPENHOLE PACKOFF ASSEMBLY PART NUMBER LINE SIZE 15/32" AM687WA0011-0469 AM687WA0011-XXXX

NOTE: THE "XXXX" IN THE PART/ASSEMBLY NUMBER REPRESENTS THE LINE SIZE IN THOUSANDTHS OF AN INCH. ADDITIONAL NOTE: THIS DUAL OPENHOLE PACKOFF LUBRICATOR AM650UU0037-XXXX AND UPPER OPENHOLE PACKOFF AM679UU0068-XXXX.

15 .3

.6 18

TOP LINE GUIDE/ENTRY (WITH LUBRICATION AND LINE CLEANING PORTS) A SEAL HOUSING SUB-ASSEMBLY Ø6.745 9.0 - 4 TPI FULL ACME

NEEDLE VALVE LOCKDOWN SCREW

ACCESSORIES: 1. HAND PUMP, P/N: AM813UU0038 2. HYDRAULIC HOSE, P/N: AM506-A04-0101-0300-Q1MF 3. LUB C-WRENCH, ID=10.0", P/N: PM652UU1515-100A 4. SEAL KIT, P/N: AM690RK0011 n6.38

HYDRAULIC INPUT FOR PACKOFF OPERATION

n1.50

n6.75

2" FIGURE 1502 HAMMER UNION

9.0 - 4 TPI FULL ACME

SEAL HOUSING SUB-ASSEMBLY

TEST INSTRUCTIONS: 1. HYDROSTATIC BODY TEST 1.1 ASSEMBLE THE COMPONENTS IN THE PARTS LIST TOGETHER EXCLUDING THE RETAINING NUT AND THE SEAL HOUSING SUB-ASSEMBLY; 1.2 USE THE TEST/NIGHT CAP AND TEST PLUG BELOW: 1.2.1 TEST CAP, P/N: AM655UU0265 1.2.2 NIGHT CAP, P/N: AM655UU0145 1.2.3 TEST PLUG, P/N: PM655UU0381 1.3 FOLLOW THE PRESSURE TEST PROCEDURE W.I. 44.0. (HYDROSTATIC BODY TEST TO 6000 PSI) 2. PACKOFF FUNCTION TEST 2.1 ASSEMBLY ALL THE COMPONENTS IN THE PARTS LIST; 2.2 USE THE PROPER SIZE TEST ROD AND TEST PLUG, PM655UU0381; 2.3 CONNECT THE HYDRAULIC HAND PUMP AND HOSE LISTED IN THE ACCESSORY LIST; 2.4 PRESSURE TEST TO THE RATED WORKING PRESSURE, 3000 PSI.

Material Spec: Process Spec:

A SECTION B-B

WP 3K TP 6K

SECTION A-A

7739 Edgar Industrial Way Red Deer, Alberta Canada T4P 3R2 Ph # (403) 346-4487

Lee Specialties

Dual Openhole Packoff 3K 6.375" Type H 9.0"-4(7.50") Drawing:

n9.8

Revision:

AM690UU0011-XXXX

Sheet:

1 of 2

Designer: MSE Date: 3/4/2015 Status: Released Appr'd By: GF Approved Date: 12/1/2015 Weight: 381 lbmass Drawn By: MSE Checked By: GF Check Date: 12/1/2015 0 Prototype 11/24/2015 MSE Unless Otherwise Indicated: All Dimensions in Inches. 125 rms Finish Min. REV. DESCRIPTION DATE APPROVED Decimal Tolerances: x.xxx `0.005 Concentricity: 0.005 TIR Fractional Tolerances: `1/16 x.xx `0.01 Exclusive Property Of Lee Specialties Considered Confidential And May Not Be Copied Or Reproduced Without Written Consent Of Lee Specialties Limited Lee Rev 9 Ledger

REVISION HISTORY

C 8 21

9 22

SECTION D-D

DESCRIPTION Dual Openhole Packoff 3K 6.375" Type H 9.0"−4(7.5") Top Sub Dual Openhole Packoff 3K Seal Housing Sub Dual Openhole Packoff 3K 6.375" Type H 9"−4(7.5") Bottom Sub Dual Openhole PAckoff Retaining Nut NUT 5K 6−5/8" H 9.0"−4(7.5") NUT 5K 6 5/8" Type H 9.00"−4(7.50") Stop Collar TP 5K 6−5/8" H 9.0"−4 (7.5") Pin Dual Openhole Packoff Lockdown Screw Dual Openhole Packoff Lockdown Pin Retainer Open Hole Packoff Energizing Elastomer Open Hole Packoff Rubber Ring Sealing Elastomer Retainer 2 Piece "Hard" Rubber Top Line Guide Retainer Open Hole Packoff Top Line Guide Open Hole Packoff Bottom Line Guide Open Hole Packoff Bottom Guide Weldment Open Hole Packoff − Top Line Guide Screw Side Open Hole Packoff − Top Line Guide Hole Side Dual Openhole Packoff Guard − Weldment O−Ring HSN 80 2−215

PART NUMBER SK ITEM QTY 22 4 PM933RG2223 2 PM933RG2367 23 24 1 PM933RG2350 25 1 PM933RG2438 26 2 PM933RD8438 27 1 PM933RG2436 28 2 PM933RD8436 29 1 PM934RG0005 30 1 PM512UU0002 31 2 PM512UU0001 2 PM553SD4A/4A 32 33 8 PM951MS050−13−150 34 10 PM951SB025−20−062 35 4 PM951SB037−16−125 36 4 PM950SB037−16−037 37 4 PM952MS063−11−125 38 4 PM954MS063 39 4 PM953MS063 40 1 PM515SD0034 41 1 PM553UU0753 42 2 PM810UU0031 X

DESCRIPTION O−Ring HSN 80 2−223 O−Ring HSN 80 2−367 O−Ring HSN 80 2−350 O−Ring HSN 80 2−438 Backup O−Ring Nitrile 90 8−438 O−Ring HSN 80 2−436 Backup O−Ring Nitrile 90 8−436 2" Weco 1502 Rubber Seal Fitting Hyd Coupler 1/4" Female Parker x FNPT Fitting Hyd Coupler 1/4" Male Parker x FNPT Adapter, Nipple 1/4"NPT Male x 1/4"NPT Male (Parker) Cap Screw 1/2"−13 UNC x 1.5" A574 *Varies* Cap Screw 3/8−16 UNC x 1.25" SS SetScrew 3_8−16 UNCx0.375 5/8 −11 X 1.25 UNC GR 8 HEX HEAD CAPSCREW 5/8" GR8 Lockwasher 5/8" GR8 Flatwasher Needle Valve 10K 1/2" MNPT x 1/2" FNPT Angle SS Straight 4K #8MNPT x #4MNPT Steel Hex Swivel Hoist Ring Crosby HR−125 #1016887 WLL 800 lbs

SK X X X X X X X

18 34

32 31 14

13 12 11 26

D E

10 1

2 41 16 30 29

3 28

38 20

39 23

37 36

DETAIL F 5

Material Spec: Process Spec:

7739 Edgar Industrial Way Red Deer, Alberta Canada T4P 3R2 Ph # (403) 346-4487

Lee Specialties

WP 3K TP 6K

Dual Openhole Packoff 3K 6.375" Type H 9.0"-4(7.50")

Drawing:

SECTION E-E

SECTION C-C

Revision:

AM690UU0011-XXXX

Sheet:

2 of 2

REVISION HISTORY

CANADA - Head Office & Manufacturing 7883 Edgar Industrial Way, Red Deer, AB, CANADA T4P 3R2 Tel: 1.403.346.4487 Fax: 1.403.347.3312 sales@leespecialties.com

USA - Main Office & Manufacturin

g 5119 Hiltonview Drive, P.O. Box 691693 Tel: 1.281.519.1719 800 number: 1.866.243.9705 Fax: 1.281.587.0865 Houston, TX, USA 77086 sales@leespecialties.com

USA - Rentals Yorktown, TX 78164 USA - Tel: 1.361.564.2907 Youngsville, LA 70592-5576 USA - Tel: 1.337.856.0070

ÂŠ Lee Specialties 2016