Standards Update
10/30200337 DC BS EN ISO 13129
Paints and varnishes. Electrochemical measurement of the protection provided to steel by paint coatings. Current interrupter (CI) technique, relaxation voltammetry (RV) or DC transient (DCT) measurements
BS EN ISO 10890:2010
Paints and varnishes. Modelling of biocide release rate from antifouling paints by mass-balance calculation
BS EN ISO 15234:2010
Paints and varnishes. Testing of formaldehyde-emitting coatings and melamine foams. Determination of the steady-state concentration of formaldehyde in a small test chamber
BS EN 2434-001:2010
Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Basic requirements
BS EN 2434-002:2010
Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High chemical resistance
BS EN 2434-003:2010
Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Flexible and high fluid resistance for interior
BS EN 2434-004:2010
Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. High flexibility
DIN EN 2434-001 (2010-12)
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 001: Basic requirements; German and English version EN 2434-001:2010
DIN EN 2434-002 (2010-12)
STANDARDS LISTING BY SUBJECT, RELATING TO CONCRETE AND CORROSION. Construction materials and building; Structures of buildings BS EN 990:2002 DIN EN 990 (2003-01) NF EN 990:2003 NS EN 990 Ed. 2 (2002) ONORM EN 990:2003 SS EN 990 Ed. 2 (2002) UNE EN 990:2003
Test Methods For Verification Of Corrosion Protection Of Reinforcement In Autoclaved Aerated Concrete And Lightweight Aggregate Concrete With Open Structure
PN 82/B-01801:1982
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Basic Design Principles
PN 86/B-01802:1986
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Terms And Definitions
PN 86/B-01810:1986
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 002: High chemical resistance; German and English version EN 2434-002:2010
Protection Against Corrosion In Building - Protective Properties Of Concrete Referring To Reinforcing Steel Electrochemical Tests
PN 86/B-01811:1986
DIN EN 2434-003 (2010-12)
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 003: Flexible and high fluid resistance for interior; German and English version EN 2434-003:2010
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Material And Structural Protection - Specifications
PN 88/B-01807:1988
DIN EN 2434-004 (2010-12)
Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Part 004: High flexibility; German and English version EN 2434-004:2010
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Principles Of Diagnostics For Structures
GOST 28574:1990
ISO 12690:2010
Metallic and other inorganic coatings - Thermal spray coordination - Tasks and responsibilities
Corrosion Protection In Construction - Concrete And Reinforced Concrete Constructions - Methods Of The Protection Covers Adhesion Testing
ISO 14921:2010
Thermal spraying - Procedures for the application of thermally sprayed coatings for engineering components
GOST 28575:1990
Corrosion Protection In Construction - Concrete And Reinforced Concrete Constructions - Test Of Protection Covers From Steam Penetration
ISO 3613:2010
Metallic and other inorganic coatings - Chromate conversion coatings on zinc, cadmium, aluminium-zinc alloys and zinc-aluminium alloys - Test methods
PN 88/B-01808:1988
Protection Against Corrosion In Building - The Principles Of The Determination Of Scars In The Coatings Protecting Steel And Reinforced Concrete Structures
ISO 9717:2010
Metallic and other inorganic coatings - Phosphate conversion coating of metals
PN 91/B-01813:1991
IEC 60664-3 Amd.1 Ed. 2.0 Cor.1 (Bilingual 2010)
Corrigendum 1 to amendment 1 - Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Superficial Protective Measures - Principles And Choice
PN 92/B-01814:1992
I.S. EN ISO 28762:2010
Vitreous and Porcelain Enamels - Enamel Coatings Applied to Steel for Writing Surfaces - Specification
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Test Method For Adherence Protective Coatings
I.S. EN ISO 8130-1:2010
Coating Powders - Part 1: Determination of Particle Size Distribution by Sieving
PN 92/B-01815:1992
I.S. EN ISO 8130-10:2010
Coating Powders - Part 10: Determination of Deposition Efficiency
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Test Methods For Water Vapour Permeability Of Protective Coatings
I.S. EN ISO 8130-11:2010
Coating Powders - Part 11: Inclined-plane Flow Test
ASTM G109-07
Standard Test Method for Determining Effects of Chemical Admixtures on Corrosion of Embedded Steel Reinforcement in Concrete Exposed to Chloride Environments
I.S. EN ISO 8130-12:2010
Coating Powders - Part 12: Determination of Compatibility
I.S. EN ISO 8130-13:2010
Coating Powders - Part 13: Particle Size Analysis by Laser Diffraction
Products And Systems For The Protection And Repair Of Concrete Structures - Definitions, Requirements, Quality Control And Evaluation Of Conformity - Part 7: Reinforcement Corrosion Protection
I.S. EN ISO 8130-2:2010
Coating Powders - Part 2: Determination of Density by gas Comparison Pyknometer (referee Method)
I.S. EN ISO 8130-3:2010
Coating Powders - Part 3: Determination of Density by Liquid Displacement Pyknometer
I.S. EN ISO 8130-4:2010
Coating Powders - Part 4: Calculation of Lower Explosion Limit
BS EN 1504-7:2006 DIN EN 1504-7 (2006-11) I.S. EN 1504-7:2007 NBN EN 1504-7:2007 NEN EN 1504-7:2006 NF EN 1504-7:2006 NS EN 1504-7 Ed. 1 (2006) PN EN 1504-7:2007 SS EN 1504-7 Ed. 1 (2006) UNE EN 1504-7:2007 UNI EN 1504-7:2007
Key word search on ‘cathode’ or 'cathodic' - 2 corrosion related Standard Publications found,
UNE 112010:1994
Assembly Corrosion - Chloride Determinations For In Service Concrete
10/30234726 DC BS EN 12496
Galvanic anodes for cathodic protection in seawater and saline mud
UNE 112011:1994
Assembly Corrosion - Determination Of The Carbonatation Depth For In Service Concrete
10/30234732 DC BS EN ISO 13174
Cathodic protection of harbour installations
Products And Systems For The Protection And Repair Of Concrete Structures - Test Methods - Corrosion Protection Test
Determination Of The Bond Behaviour Between Reinforcing Steel And Autoclaved Aerated Concrete By The Beam Test - Part 2: Long Term Test
Key word search on 'galvanize' or ‘galvanized’ or 'galvanizing’ –1 Standard Publications found; 10/30234726 DC BS EN 12496
Galvanic anodes for cathodic protection in seawater and saline mud
ISO/FDIS 2106.2
Anodizing of aluminium and its alloys - Determination of mass per unit area (surface density) of anodic oxidation coatings - Gravimetric method
BS EN 15183:2006 DIN EN 15183 (2006-11) I.S. EN 15183:2007 NEN EN 15183:2006 PN EN 15183:2007 NF EN 15183:2007 UNE EN 15183:2007 (R2010) UNI EN 15183:2007
ISO/FDIS 8994.2
Anodizing of aluminium and its alloys - Rating system for the evaluation of pitting corrosion - Grid method
NF EN 12269-2:2010
BS EN ISO 2143:2010
Anodizing of aluminium and its alloys. Estimation of loss of absorptive power of anodic oxidation coatings after sealing. Dye-spot test with prior acid treatment CD-ROM
Construction materials and building; Construction materials
BS EN ISO 6719:2010
Anodizing of aluminium and its alloys. Measurement of reflectance characteristics of aluminium surfaces using integrating-sphere instruments
PN 82/B-01801:1982
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Basic Design Principles
BS EN ISO 7668:2010
Anodizing of aluminium and its alloys. Measurement of specular reflectance and specular gloss of anodic oxidation coatings at angles of 20 degrees, 45 degrees, 60 degrees or 85 degrees
PN 86/B-01802:1986
Protection Against Corrosion In Building - Concrete And Reinforced Concrete Structures - Terms And Definitions
PN 86/B-01810:1986
Protection Against Corrosion In Building - Protective Properties Of Concrete Referring To Reinforcing Steel Electrochemical Tests
Key word search on 'anode' or ‘anodes’ or ‘anodic’ – 1 Standard Publications found; 10/30234726 DC BS EN 12496
Galvanic anodes for cathodic protection in seawater and saline mud
Key word search on 'anodizing’ or ‘anodize(d)’ –5 Standard Publications found relating to aluminium and its anodizing; none from AS/NZS;
Key word search on 'corrosion' and 'concrete' or ‘concrete’ and ‘coatings’ - 0 Standard Publications found.
16 Corrosion & Materials
www.corrosion.com.au
Vol 36 No 1 February 2011
17