ACA STANDARDS UPDATE
Search by subject – Metallurgy – Iron and steel products – 4 results ASTM C1582/C1582M-11
Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
ASTM G180-07
Standard Test Method for Initial Screening of Corrosion Inhibiting Admixtures for Steel in Concrete
UNE 112010:2011
Corrosion Of Concrete Reinforcement Steel - Chloride Determination For In-Service Concrete
UNE 112011:2011
Corrosion Of Concrete Reinforcement Steel - Determination Of The Carbonation Depth For In-Service Concrete
Search by subject – Civil Engineering – Bridge construction – 1 result AASHTO TF 32:1992
Task Force 32 Report - Manual For Corrosion Protection Of Concrete Components In Bridges
Table 2. New standards, amendments or drafts for AS, AS/NZS, EN, ANSI, ASTM, BSI, DIN, ETSI, JSA, NSAI and Standards or Amendments for ISO & IEC PUBLISHED between 1 November 2011 and 25 January 2012 Key word search on ‘durability’ – 3 citations found 2 from AS AS/NZS DIN EN ISO 12543-4 (2011-12)
Glass in building - Laminated glass and laminated safety glass - Part 4: Test methods for durability (ISO 12543-4:2011)
DR AS 3706.11 CP
Geotextiles - Methods of test - Part 11: Determination of durability - Resistance to degradation by light, heat and moisture
DR AS 3706.13
Geotextiles - Methods of test - Part 13: Determination of durability - Resistance to certain microbiological agents
Key word search on ‘corrosion’ or ‘corrosivity’ or ‘corrosive’; but not ‘anodizing’ or ‘anodize(d)’ – 15 citations found; none from AS or AS/ASNZ 11/30249422 DC BS EN 15280.
Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines
11/30254168 DC BS EN 10088-3.
Stainless steels. Part 3. Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resisting steels for general purposes
BS 7870-3.12:2011
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated combined neutral and earth copper wire concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-3.22:2011
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated split concentric cables with copper or aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS 7870-3.50:2011
LV and MV polymeric insulated cables for use by distribution and generation utilities. Specification for distribution cables of rated voltage 0.6/1 kV. XLPE insulated , copper wire waveform or helical concentric cables with solid aluminium conductors, having low emission of smoke and corrosive gases when affected by fire
BS EN 4540:2011
Aerospace series. Bearings, spherical plain, in corrosion resisting steel with self-lubricating liner elevated load under low oscillations. Technical specification
DIN 81249-1 (2011-12)
Corrosion of metals in sea water and sea atmosphere - Part 1: Terms and Definitions, basic information; Text in German and English
DIN 81249-2 (2012-01) (Draft)
Corrosion of metals in sea water and sea atmosphere - Part 2: Free corrosion in sea water; Text in German and English
DIN EN 4687 (2012-01) (Draft)
Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application; German and English version FprEN 4687:2011
DIN EN 4688 (2012-01) (Draft)
Aerospace series - Paints and varnishes - Corrosion inhibiting two components cold curing primer for military application; German and English version FprEN 4688:2011
DIN EN 4704 (2011-12) (Draft)
Aerospace series - Tartaric-Sulphuric-Acid anodizing of aluminium and aluminium wrought alloys for corrosion protection and paint pre-treatment (TSA); German and English version FprEN 4704:2011
I.S. EN 4540:2011
Aerospace Series - Bearings, Spherical Plain, in Corrosion Resisting Steel With Self-lubricating Liner Elevated Load Under low Oscillations - Technical Specification
IEC 61701 Ed. 2.0 (Bilingual 2011)
Salt mist corrosion testing of photovoltaic (PV) modules
ISO/FDIS 21608
Corrosion of metals and alloys - Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials
JIS C 60695-5-1:2011
Fire hazard testing - Part 5-1: Corrosion damage effects of fire effluent - General guidance
Key word search on ‘paint’ and or ‘coating’; but not ‘anodizing’ or ‘anodize(d)’ or corrosion – 77 Publications found; none from AS or AS/NZS. ISO 11127-3:2011
Preparation of steel substrates before application of paints and related products - Test methods for non-metallic blastcleaning abrasives - Part 3: Determination of apparent density
11/30237853 DC BS ISO 16482-1
Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Part 1. Oven method
11/30237856 DC BS ISO 16482-2
Binders for paints and varnishes. Determination of the non-volatile-matter content of aqueous rosin-resin dispersions. Part 2. Microwave method
BS EN 4159:2011
Aerospace series. Paints and Varnishes. Determination of resistance to microbial growth
February 2012 www.corrosion.com.au p.27