Functions of Spreader Beam Given the regularity with which spreader beams are used on-site, many are familiar with the functional and structural distinctions between spreader beams and barely lifting beams. Here are few lesser-known facts about Spreader Beam. Modular
spreader
beams
provide
the
very
convenient portability While lifting beams need significant space for shipping and storage, a telescopic shaft may reach 40' while requiring no more than 23'. In contrast to a modular beam constructed of four middle parts (struts), your optimum length requires just ten feet of space. This means that although a standard vehicle may carry your spreader, a large flatbed is necessary to convey the lifting beam and telescoping boom. The capacity of a beam is limited. Spreader beams made of modular components are possibly being placed in any configuration. A square or rectangular pattern Specific projects need many pick-up locations spread across an extensive range, typically requiring two cranes or a series of spreader beams stacked one on top of the other, using massive amounts of headroom. Modular spreaders may be constructed in this configuration, dubbed a CMOD, which needs just one overhead heaving point and requires much less headroom. On average, spreader beams are three to four times lighter and smaller than steel lifting beamsSpreader beams constructed to withstand compressive pressures rather than bending forces need much less space to build, but are also more vulnerable to abuse. Attempting to increase the number of pick spots in the middle of the beam is a common abuse. Spreader beams minimize the danger of the load being damaged -