Sykes-Pickavant May - August 2018 Promotional Brochure

Specialist Tool Solutions

New Products & SPECIAL OFFERS

may to

august

2018

Featuring the New & Exclusive

hub pulling star buy

HYDRAULIC HUB PULLER KIT

085300SP

8 tonne

Consists of manual and hydraulic components Includes:

• 08530800 - Specially designed extra-wide hub puller plate - 8 Tonne Hydraulic Ram c/w nose piece & 2” • 150000V2 extension • 087580-05 - Mechanical Screw - 1 1/2” whit • 08530700 - Slide Hammer - 5/8” UNF x 1.6kg • 08531270 - Adaptor for Slide Hammer

£225.00 HYDRAULIC & MECHANICAL HUB PULLER KIT

12730600

FOR USE IN 3, 4 OR 5 LEG COMBINATIONS

use on a variety of wheel stud pattern applications - 4, 5, 6 stud hubs, with pitch £229.95 • For circle up to 203mm • SP hydraulic ram allows for smooth, progressive application of up to 8 tonnes of force heavy duty force screw with impact handle where shock action is required to • Includes ‘break’ stubborn hubs • Leg Reach: 158mm • Stud Hole Diameter: 15.8mm

new TO

HEAVY DUTY 9KG SLIDE HAMMER

08583200

UPGRADE OPTION - THREAD ADAPTOR SET adaptor tool, M18 x • 11.5x system 08583600 with mounting bore (jointed

RANGE

£129.95

£279.00

• •

Suitable for removing injectors, wheel hubs, supporting joints etc. with relevant accessories

• • • •

8 tonne (approx.) maximum force Loosens even the tightest connections; pressed or rusted in

Mounting unit for Heavy Duty Slide Hammer - 08583200

For driving out components and straightening jobs on bodywork with extra tough heavy-duty design and practical handles Weight: 9kg

•

Length: 770mm

•

•

Connection Thread: M18 x 1.5

UNIVERSAL HUB PULLER & DRIVE SHAFT KIT

Supplied with 4 x commonly used slide hammer adaptors

£1195.00

08535000

•

connection) for universal hooks, double extractor hooks, bow hooks, bodywork pull clamps etc. Suitable for Müller /Klann /KS /Pichler 1 x system adaptor tool, M18x1.5/1-1/2 inch x 16 for wheel hub puller. Suitable for Müller /KS /Pichler

1 x universal adaptor with ball joint, M18x1.5, for use between the slide hammer and the tool, enables work in hard-to-reach places. Suitable for all systems 1 x system adaptor tool, M18 x 1.5/M22x2.0, for wheel hub puller. Suitable for Facom

NEW

Universal kit for pressing out, pulling in and separating drive shafts as well as disassembling/assembling wheel hubs

for vehicles such as SUVs & transporters with an • Suitable M14 wheel attachment and bolt circle of up to ø 136mm anti-swivel puller is suitable for common nuts and • The bolt-secured drive shafts (e.g. VW / Audi) Can be used with: 150000V2 - 8 Tonne Ram 180000V2 - 10 Tonne Ram 08530900 - Slide Hammer 12731100 - Shock Handle 08583200 - Slide Hammer

• • • • •

www.sykes-pickavant.com

1

01543 679900

suspension “take the press to the vehicle”

UNIVERSAL PRESS FRAME C/W 12 TONNE HYDRAULIC RAM 187000V2

or

UNIVERSAL C-CLAMP 18780500

£309.95 Land Rover Swivel Ball Joint Adaptor Set

£219.95 £289.95

Land Rover Bush Press Kit

18771000

18775000

18777100 Front Lower Kit

18777200

£199.95

£139.95

Opel Movano / Renault Master / Nissan Interstar - UPPER Ball Joint Adaptor Set

Opel Movano / Renault Master / Nissan Interstar - LOWER Ball Joint Adaptor Set

187502V3

187503V3

£99.95 Adaptor Ring

18780400

187502V3 + 187503V3 only for use with 187000V2 Press Frame

£219.95 18777300 Rear Lower Kit

Land Rover Discovery 3 & 4 Suspension Bush Master Kit

18777000

18777400

Front Upper Kit

Rear Upper Kit

£174.95

£174.95

Mercedes Sprinter Ball Joint Tool Adaptor Set

187403V3

£699.95 Ford Transit Lower Arm Bush Tool

08269000

£99.95 £99.95

£209.95

Multi-application Step Plate

18775100

£99.95

Fiesta & Focus Bush Kit

Fiesta Bush Adaptor Set

18732500

18732100 Focus Bush Adaptor Set

£24.95

XS Sleeve Kit Master

18732200

£31.95

Car / LCV Sleeve Kit

08786500

08780000

£335.00

£379.00

£99.95 SUV / LCV Sleeve Kit

08790000

£715.00 2

£309.95 Commercial Sleeve Kit

08797500

Upgrade Kit From 08790000 to 08797500

£1145.00

£495.00

08795000

SALES@sykes-pickavant.com

suspension FIESTA MARK VI REAR BUSH KIT

ASTRA H / ZAFIRA REAR AXLE BUSH KIT

08730500

08512800

£189.95

£189.95

To remove and install the rear axle body bush on the vehicle Suitable For: Astra H (L48) ‘04- / Astra GTC (L08) ‘05- / Astra H Box (L70) ‘04- / Astra Estate (L35) ‘04- / Astra Saloon (L69) ‘07- / Astra TwinTop (L67) ‘05- / Meriva B ‘10- / Zafira B (A05) ‘05-

For the installation and removal of the rear axle body mounting bush found on Fiesta Mark VI 2008 onwards

FORD & VOLVO REAR WISHBONE / TRAILING ARM BUSH TOOL KIT

087304V2

NEW

on vehicle INTERNAL COIL SPRING COMPRESSOR 084500V2 solution

£419.00

SAVE: £50.00

£199.95

SPECIAL JAW DESIGN

and safe handling of springs on cars • Innovative with wishbone and multilink suspension only tool on the market capable of handling • The among others VW Touran, Citroën C3, Skoda

LIST PRICE: £249.95

Octavia, and Peugeot 107

ultra compact design makes it possible to • The use the tool for cars with a small hole in the rear spring control arm down to ø30 mm

innovative angled shape of the jaws • The provides a high degree of functionality and improves safety

with a unique safety • Comes key torque, which makes

• it easier, safer and more convenient to position the One person operation • tool correctly inside the spring Applications safety key prevents • The Mondeo / Mondeo Estate ‘07-, S-Max & Galaxy ‘06overload and thereby improves • Ford: safety • Volvo: XC70 & V70 ‘07-, XC60 ‘08-, S60 & V60 ‘10SUSPENSION WEAR INDICATOR 08085000 UNIVERSAL SUSPENSION ARM LEVER An innovative tool for detecting detecting faults in: 08080000 • -ForWheel suspension and axle joint wear bearings Updated kit now also capable of installing & removing the longer bush as fitted onto the nearside of newer model Volvo cars

- Suspension joints and suspension struts - Stabilizers, bushes and balljoints - Steering gear and links

SUITABLE FOR PRE MOT TESTING

£69.95

SAVE: £34.00

£165.95 LIST PRICE: £199.95

tool creates a rocking • The motion in any direction (forward

•

For lowering of the suspension arms and separation of suspension components

angle, side angle etc.) in order to detect movement in steering and suspension components

effort required, due to unique • Reduced design using leverage and body weight • Adjustable swing point allows for variable LH & RH applications

Recommended for use on four post lift or on floor

www.sykes-pickavant.com

3

01543 679900

suspension VW ALLOY 4 LINK SUSPENSION BOLT REMOVER SET

08041000

SAVE: £8.00

£33.95 LIST PRICE: £41.95

tool to use with • Simple ‘Vibro-Impact’ air hammer (90206000) when bolt ends protrude from housing

guides the impact end to free off and • Sleeve push bolt through the housing adaptor for removing bolts deep in • Extension the housing be used in conjunction with 08485000 • Can Hub Clamp Spreader Tool

3-SIZE BALL JOINT SEPARATOR

08065000

4 WAY BALL JOINT SEPARATOR - CAR / LCV APPLICATIONS

080500V2

SAVE: £13.00

£64.95 4-way lever design allows for a wide • Unique variety of applications are available, by removing the pin • 4andoptions selecting any of the 4 positions slim jaw fork design • Tapered, with tough, black epoxy coating Opening: • Jaw 24 / 30 / 40 / 45mm options • Jaw Throat Width: 19mm • Jaw Throat Depth: 30mm • Drop forged rugged, flat design with 3 interchangeable forks are attached to the centre screw to allow continuous £172.95 • Forks adjustment within the jaw capacity range an internally operated drive spindle (M24) and an • Features elongated recess in the forks, providing a safe & secure operation • Jaw capacity range: 30 - 65mm • 3 x fork sizes: 24, 27 and 31mm for use on vehicles: Audi / VW (A3, A4 and A6 with double • Ideal wishbone), BMW & Mercedes-Benz LIST PRICE: £77.95

NEW

UNIVERSAL WHEEL BEARING KIT

08145000 BEARING REMOVAL

£649.00

BEARING INSTALLATION HUB INSTALLATION

Complete set for mounting and dismounting wheel bearings and for assembling hubs

large number of pressure bushes and centering washers in this kit makes it ideal for • The a wide range of applications upon cars, vans and transporters • Guarantees safety and accuracy at all stages of the working operation ideal for use with a press machine; suitable for wheel bearings, silent bearings, • Also bushes, washers, hubs etc.

• The special design of the components provides installation without damage is placed on the outside of the bearing ring for bearing installation and the • Pressure inside for hub installation

UNIVERSAL BEARING RING PULLER

08100000

£229.95 LIST PRICE: £279.95

the removal of bearings, • For races, sleeves etc. the need for • Removes cutting tools – greatly reduces time required

patented design – • Unique specially designed cutting edges

‘cut’ and are pressed • Legs into the radius behind the ring

/ Tight’ pulling • ‘Loose principle - force is applied

•

INDUCTION HEATER +

96040000

SAVE: £50.00

evenly around the ring

Suitable for all kinds of bearings / rings – 40-60mm

Applications Include: ABS Sensors Brake Bleeder Nuts Exhaust System Heat Treating Inline Connectors Metal Fabrication O2 / DPF Sensors Truck Bed Bolts Body Panel Dents Tie Rod / Ball Joint Ends Suspension Components Steering Components U-Bolts

• • • • • • • • • • • • •

£595.00

KIT CONTENTS

• • •

1 x Coil

1 x String 1x Bearing Buddy

two year warranty

Generates ‘Invisible Heat’ to release corroded and thread locked metal components without the danger of an open flame

• Angled design with trigger • Coil Twist Lock™ • LED usage indicator 4

• Fault override delay • User controlled LED light switch • Fan operation enhancements

SALES@sykes-pickavant.com

WORKSHOP presses ‘SILVER SERIES’ HYDRAULIC WORKSHOP PRESSES AVAILABLE IN 4 RATINGS: 15T, 20T, 30T & 50T

best selling

models

PART NO.

RATING

HEIGHT (mm)

WIDTH (mm)

DEPTH (mm)

BED DEPTH (mm)

RANGE

WEIGHT (kg)

PRICE

53436000

15T

1930

920

650

170

85 - 950

150

£679.00

53436200

20T

2030

940

650

180

65 - 1030

165

£799.00

53436400

30T

2060

1120

650

200

115 - 1020

230

£1150.00

53436500

50T

2290

1220

650

210

70 - 1065

370

£1899.00

Range of Hydraulic Workshop Presses equipped with a two-speed manual pump, overload safety valve, automatic ram return system & V blocks duty steel frame • Heavy Automatic arm return

• Manufactured in the EU • Two speed pump • Pressure gauge •

over-travel limit stop • Piston Overload • V blocks safety valve • Winch for table* • *For models 53436400 & 53436500

N.B. For deliveries made outside UK Mainland, an additional carriage charge will apply / Other sizes of press are available - Contact Customer Services or visit www.sykes-pickavant.com for details

60 - 100 TONNE HAND OPERATED & ELECTRO-HYDRAULIC PRESSES ARE ALSO AVAILABLE - SEE WEBSITE FOR DETAILS

UNIVERSAL PRESS RING 53452200

new

press support block 08770000

bestseller

£79.95

for use with press block - 08770000

£229.00

A quick solution to assist the bearing to be pressed out on a wide range of common hubs

large void for holding hubs and pressing out wheel • Ideal bearings diameter sits across the press allowing for large hubs • Large to be placed on the press ring alternative to V blocks and old bearing casings • Useful for use on 30 or 50 tonne rated presses • Suitable Dimensions: • Weight: 7.8kg160mm (h) x 179mm (ø) •

www.sykes-pickavant.com

Universal Press Support Block

bearings on a variety of suspension arms • Press point contact for perfect, safe support • Three Adjustable height anvil bolts • Swivel element for added versatility • Numbered system recording specific applications • Suitable for use withforpresses up to 30T •

5

01543 679900

SUSPENSION WORKSTATIONS our workstations evolve as and when required PNEUMATIC COIL SPRING COMPRESSOR WORKSTATION 385800SP MARKET LEADING MODEL

ARM EXTENDER - PAIR

385800-60

UPPER JAW SET

SWIVEL JAWS - PAIR

38480200

385800-61

£46.95

SAVE: £100.00

heavy duty

£1795.00 LIST PRICE: £1895.00

Universal piece of equipment for assembling and disassembling struts and coil springs on cars, 4WDs and LCVs switch prevents • Safety operation when gates are open

strut vice with • Adjustable 4 x setting options jaws/ • Interchangeable vice to suit different

£79.95

onto between original • Mounts £154.95 • Mounts top arms in top arm and jaw attachment place of standard top jaws & high compression and to extend the length of contacts directly onto spring • For • Use close coil springs (Toyota / the top spring mounting jaw Jaw ‘floats’ to follow changes position • in spring angle / profile during Honda etc.) be used singly to compression • Can provide 10mm extension on left and right handed or as a pair for 2 x 10mm • Works coil springs when used with extension

brackets below

MERCEDES BRACKETS

38481000

38480800

38480900 £79.95

£79.95 £79.95 Suitable for: Front Springs

springs

double depth • Unique front plate • Length of travel: 330mm to 2452kg of force (at • Up 10 bar) arms & jaws adjust • Top and lock to secure spring • Automatic jaw levelling • 4 x floor mounting holes 2 x standard • Includes brackets: 78-130mm and 105-182mm

INCLUDES FREE ADAPTOR BRACKET SET (38780100) MECHANICAL COIL SPRING COMPRESSOR WORKSTATION 38680000 ideal for mobile use

Suitable for: Rear Springs

Suitable for: Front Springs

BMW SPECIAL BRACKET

LEFTWARDS SPECIAL BRACKET

ML Class 163 • Mercedes 1997-2005

38481600 £99.95

Base Coupe 2-Door • BMW 2003 - 2011 Sedan 4-Door 2003 • Base - 2011 Sport Utility • xDrive30i 4-Door 2007 - 2010 Sport Utility 4-Door • 3.0si 2007 - 2008

power mechanical • High spindle allows for the

application of up to 1600kg of compression force onto contained spring

main spindle achieves a • Long large 420mm stroke by easy access • Powered 19mm hex drive on top of tool

• £895.00

directly onto main spindle and can be used with either hand tools or impact air tools Includes adjustable vice clamp

38481100 £99.95

£126.95 For Leftwards Front Spring Applications (between 105 - 187mm) Including Nissan Qashqai (J10 2006 - 2013), Renault Koleos and Laguna

Suitable for:

• Nissan Qashqai (J11 2014 - )

JAW HOLDER

DOUBLE DEPTH STRUT VICE 38580000 COVER

38480700

NISSAN SPECIAL BRACKET

38480600

Suitable for:

with Heavy Duty • Fitted Mechanical Components

instead of Pneumatics - Ideal for mobile use or where air supply is not practical

C Class (W205) • Mercedes 2015 onwards

C Class (W204) • Mercedes 2008-2014 E Class Coupe • Mercedes (W207 / C207) 2009 onwards

38580200

3858COVER £37.95

£125.95

£99.95

protection of the • For use with extra long strut 38580000 Coil Spring • For assemblies Compressor Workstation when not in use • Chrysler Voyager

COIL SPRING CLAMP

use with 3858 and 3868 • For workstation brackets 3 x hanging hooks • Includes and 4 x slots for brackets a tidy and safe • Provides storage solution

to secure coil spring into lower bracket for use • Tool with the SP range of suspension workstations to hold the coil spring still during initial • Designed compression and restrict twisting through the

38580400

£52.95

bracket

• Rubber dipped to prevent scratching the coil spring

MIRROR

£29.95

385800-50

Adjustable upper mirror for better centering of the shock absorber cap during assembly and operation with any of our workstations • Compatible • Magnet attachment

6

SALES@sykes-pickavant.com

torque Motorq Professional Torque WrenchES • • • • • • •

Accurate to ±3% of reading which meets and exceeds ISO6789:2003 60% larger scale for better visibility and improved accurate setting

MADE IN THE UK

Scale adjusts 40% faster and the effort required to adjust is reduced Improved serviceability means longer life and reduced ownership costs Superior, ergonomic handle and shape - Soft-feel, high grip material and more comfortable to use

TIMESTRIP

®

Now includes a push/pull type lock for faster use; the coloured band on the lock Our new torque wrenches feature the Timestrip® which provides a visual clearly shows that the wrench is unlocked indication when the wrench is due for New Timestrip® Feature - Torque wrenches should be calibrated once a year re-calibration and has 3, 6, 9 and 12 as a minimum, more frequently in harsh environments and with high levels of month graduations usage

‘Motorq 20’ - 3/8” Push-Thru Torque Wrench

80002000

push thru sq dr • 3/8” Length: • Supplied210mm in poly tube •

- 20 Nm / 40 - 180lbs.in • 4Weight: 0.36kg •

80105000

push thru sq dr - 50 Nm / 7.5 - 37.5lbs.ft • 3/8” • 10Weight: Length: 335mm 0.7kg • Supplied in blow moulded box• •

‘Motorq 100’ - 1/2” Push-Thru Torque Wrench

80110000

push thru sq dr - 100 Nm / 15 - 75lbs.ft • 1/2” • 20Weight: Length: 387mm 0.94kg • Supplied in blow moulded box• •

‘Motorq 200’ - 1/2” Push-Thru Torque Wrench

80120000

push thru sq dr - 200 Nm / 30 - 150lbs.ft • 1/2” • 40Weight: 470mm 1.07kg • Length: • • Supplied in blow moulded box

‘Motorq 300’ - 1/2” Push-Thru Torque Wrench

80130000

push thru sq dr - 300 Nm / 50 - 220lbs.ft • 1/2” • 60Weight: 593mm 1.42kg • Length: • • Supplied in blow moulded box

‘Motorq 340’ - 1/2” Push-Thru Torque Wrench

80134000

push thru sq dr - 340 Nm / 50 - 250lbs.ft • 1/2” • 60Weight: Length: 685mm 1.48kg • Supplied in blow moulded box• •

‘Motorq 340’ - 3/4” STEPPED Torque Wrench

80140000

sq dr (uses stepped convertor) • 3/4” in blow moulded box Length: 686mm • Supplied • Weight: 1.93kg 80 400 Nm / 60 - 300lbs.ft • •

www.sykes-pickavant.com

PUSH-THRU HEAD

£117.95 4 - 20 Nm

N.B Time strip not included with this model

‘Motorq 50’ - 3/8” Push-Thru Torque Wrench

ALSO FEATURES PROFESSIONAL SCALE

£142.50 10 - 50 Nm

£142.50 20 - 100 Nm

£158.50 40 - 200 Nm

£174.75 60 - 300 Nm

£188.50 60 - 340 Nm

£261.50 80 - 400 Nm 7

01543 679900

silbertool® silbertool thread reformer ®

Our new range of External Thread Reform Tools use innovative non-cutting technology to return threads from M5 – M110 back to their original shape

• • • • • •

NEW

Allows original parts to be reused rather than replaced Works on all types of thread including metric, fine and imperial with compatible rollers No external energy source is required; process is completed by hand Threads aren’t weakened during the reforming process; cold hardening leaves the thread 39% harder than those which have been cut

WATCH THE VIDEO

Threads reformed with the Silbertool® withstand the same static and dynamic loads as a new undamaged thread, with a higher fatigue endurance limit

+

The finished surface is smoother than if cut which reduces the chance of corrosion and improves thread lifespan

Roller packs must be used with the thread reformer; available in sets of 3, they are interchangeable and available to purchase separately

THREAD REFORMER OPTIONS

01421600 M5 - M16

01423600 M10 - M36

£147.00 MAIN ASSEMBLY* * Rollers required but not included

£379.00

POPULAR COMPATIBLE ROLLERS FOR THE 01421600 014216-304 Metric 1.00mm

014216-305 Metric 1.25mm

£39.00 PER ROLLER PACK

014216-306

MORE ROLLER PACKS HERE

Metric 1.50mm

* Rollers required but not included

WATCH THE VIDEO HERE

POPULAR COMPATIBLE ROLLERS FOR THE 01423600 014236-203

014236-206

Metric 1.00mm

Metric 1.75mm

014236-204

014236-207

Metric 1.25mm

Metric 2.00mm

£66.00 PER ROLLER PACK

014236-205

MORE ROLLER PACKS HERE

Metric 1.50mm

01426000 M10 - M60

£479.00

MAIN ASSEMBLY*

WATCH THE VIDEO HERE

MAIN ASSEMBLY*

01431100 M50 - M110

£759.00

* Rollers required but not included

WATCH THE VIDEO HERE

MAIN ASSEMBLY* * Rollers required but not included

WATCH THE VIDEO HERE

Perfect for truck axles due to large thread diameter accommodation

POPULAR COMPATIBLE ROLLERS FOR THE 01426000 & 01431100 014311-104

014311-106

014311-108

Metric 1.25mm

Metric 1.75mm

Metric 2.50mm

014311-105

014311-107

Metric 1.50mm

Metric 2.00mm

014311-109 PER ROLLER PACK

£119.00

Metric 3.00mm

01426000 & ROLLER PACKS

8

01431100 & ROLLER PACKS

SALES@sykes-pickavant.com

WORKSHOP EQUIPMENT

53403500

FORTRON INJECTOR MAX £2149.00

The Fortron Injector Max Machine provides a simple and effective method of cleaning both petrol and diesel fuel systems without the removal of injectors from the vehicle Cleans the complete fluid systems without disturbing / removing any key components Includes comprehensive adaptor set and OTHER MACHINES, FLUIDS AND ACCESSORIES HERE! Injector Max Fluids - Petrol & Diesel Operates using compressed air Multi Functional - Cleans fuel injectors, fuel lines, fuel pumps, combustion chambers and throttle body systems Removes all deposits from the fuel system without damaging the engine, fuel pump and fuel lines New technology Injector Max system cleaning fluids are suitable for all vehicles including the latest style common rail diesel engines - Made in Britain to be compatible with European fuels and recognised bio-diesels

• • • • • •

FOR CARS SUFFERING WITH LACK OF POWER, ROUGH IDLE OR POOR FUEL ECONOMY

INCLUDES

BENEFITS INCLUDE:

Comprehensive adaptor set

IMPROVED MPG

: S E D U L C N I

IMPROVED POWER LOWER EMISSIONS

INCLUDES

:

Access to the Fortron-Zone Forum Share and gain knowledge

INCLUDES

:

CO2 FREE leaflet dispenser & Injector Max leaflets

SMOOTHER PERFORMANCE

www.sykes-pickavant.com

:

9

Listing on the Injector Max Garage Directory As featured on our website

01543 679900

new and exclusive

ARRANTY TWO YEAR W

53400300 SAVE: £200

SPECIAL INTRODUCTORY PRICE £3295.00 LIST PRICE: £3495.00

• Promotes efficient engine operation with a cleaner engine • Hydrogen runs into the combustion engine’s air inlet system whilst running • Portable machine - enables use away from the normal garage environment Voltage Operation - works off the vehicle’s battery at a safe low • Low voltage when the engine is running • Easy to use - no or little disassembly of the engine required • Low maintenance - made in the UK • Fixed HHO supply • Two year warranty MADE IN THE UK

WATCH THE VIDEO HERE!

approx.10 minutes into operation

approx. 30 minutes into operation

after operation

Initial indication of carbon deposits being cleared; visible in exhaust smoke

As deposits burn off, exhaust smoke already begins to appear cleaner

Internal build up is expelled leaving the vehicle with a cleaner engine

10

SALES@sykes-pickavant.com

hgv Motorq Heavy Duty Torque WrenchES - break back style ‘Motorq 340’ - 1/2” Push-Thru Heavy Duty Torque Wrench

MADE IN THE UK

80134500

1/2” push-thru sq dr • 80 - 340 Nm / 60 - 250lbs.ft • Length: 783.5mm • • Weight: 3.00kg

SAVE: £51.50

£275.00

80 - 340 Nm

LIST PRICE: £326.50

‘Motorq 400’ - 3/4” Push-Thru Heavy Duty Torque Wrench

80040000

push-thru sq dr • 150 - 700 Nm / 100 - 500lbs.ft • 3/4” • Length: 1150mm • Weight: 6.30kg

£428.50

150 - 700 Nm

‘Motorq 500’ - 3/4” Push-Thru Heavy Duty Torque Wrench

80050000

3/4” push-thru sq dr • 300 - 1000 Nm / 200 - 750lbs.ft • Length: 1475mm • • Weight: 7.30kg

£439.95

300 - 1000 Nm

‘Motorq 550’ - Stepped 3/4” to 1” Heavy Duty Torque Wrench

80055000

Dr (uses ¾” to 1” stepped convertor) • 1”700Sq.- 1500 Nm / 500 - 1000lbs.ft • Length: 1475mm • Weight: 10.40kg •

£659.50

300 - 1000 Nm

‘Motorq’ Heavy Duty Torque Multiplier

80065500

1” Impact Wrench - long anvil ®

90204500

£702.95

only 6.8kg

£749.00 UP TO 3100nM

twin hammer mechanism • Powerful 4 step power • Smart designcontrol ergonomically designed handle • Single-switchand can be changed for easy forward or reverse operation • Easily adjustable regulator • Can be configuredtorque for right and left handed use • Lightweight magnesium composite housing • 190mm long anvil •

• with conventional torque wrenches for heavy duty applications • Use Supplied reaction bars, in plastic storage case • After-saleswithservice • Input Drive: 3/4” sq available • Max Input: 540 Nm dr / 36mm hex Output: 2700 Nm • Output Drive: 1” • Max Weight: 4:5 • • Single stage epicyclic gears, producing a 5 : 1 multiplication ratio

www.sykes-pickavant.com

11

01543 679900

hgv XL Cooling System Pressure Test Kit

Ball Joint Separator - HGV

331400V2

08070000

£299.95 Applications Include: Bova, Case, Caterpillar, County, DAF, Dart, David Brown, Denis, Deutz-Fahr, ERF, Fendt, Ford, Iveco, JCB, John Deere, Komatsu, Leyland Marshall, MAN, Massey Ferguson, Mercedes-Benz, Neoplan, New Holland, Optare, Renault, Scania, Volvo construction and agricultural vehicles Includes:

• • •

Metal bodied hand pump with pressure dual gauge & quick-release fitting Hose Assembly c/w quick-release fitting 10 x Reservoir & Radiator pressure caps

Note: Full application details can be found on our website: www.sykes-pickavant.com

HGV SPLIT BUSH KIT - master 18797000

• •

£147.95

Strengthened fork and lever, allows for greater force to be applied Jaw opening capacity 70mm, jaw width 36mm

12 Tonne Hydraulic Ball Joint Separator 180700V2

£294.95

Updated kit now uses power from the SP 12 tonne hydraulic ram

•

Hydraulic version of the 08070000 HGV Ball Joint Separator

Specification:

• • •

Jaw Opening: 70mm Jaw Throat Width: 36mm Jaw Throat Depth: 50mm

BESTSELLER HGV HUB PULLER KIT

available 1st july 21027500

£449.00

£769.00

For the removal and installation of split / spring eye bushes on HGV vehicles

Uses a unique clamping system and a series of shells for • a range of bush sizes from 56mm Dia to 75mm Dia. • When used with a hydraulic pump (20017000) the kit allows the operator to work in a limited access environment and so reduce the amount of disassembly work required Applications

Shell 5 (65mm) - Mercedes Benz Actros, Atego

Shell 1 (75mm) - Mercedes Benz

Shell 6 (63mm) - DAF

Shell 2 (70mm) - MAN

Shell 7 (60mm) - Mercedes Benz / IVECO Eurostar

Shell 3 (68mm) - MAN Front Spring Shell 4 (66mm) - IVECO Eurostar

Universal wheel HUB extractor

• • •

Variable for pitch circle diameter up to 300mm To suit wheel stud sizes commonly found on DAF, MAN, MERC & RENAULT models Contains 5 x thread adaptor pairs; - M18 x P1.5 x 65mm/L

- M24 x P.15 x 65mm/L

Shell 8 (58mm) - Mercedes Benz / Volvo

- M20 x P1.5 x 65mm/L

- M30 x P.15 x 65mm/L

Shell 9 (56mm) - IVECO Eurostar

- M22 x P.15 x 65mm/L

Wheel Hub Grinder 90mm 1 Holder + 1 Disc HGV wheel stud grinder - alu body 66193000

£89.95

90mm

66198000

Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts corrosion is quickly and easily removed

Special grinder for cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)

• • • 66193200 2pc. spare discs for 66193000

Grinding Diameter: 200mm

£112.00

Internal Diameter: 90mm Max. Speed: 1000rpm

2pc.

£59.95

NEW

66198100 5pc. standard spare discs for 66198000

12

£29.00

5pc.

66198200 5pc. rough spare discs for 66198000

holder, 5 x 56mm • 1standard discs & 5 x 56mm rough discs

£39.00

5pc.

SALES@sykes-pickavant.com

FLUID HANDLING & built in new PRINTER database INCLUDED

premium atf machine 350820SP PREMIUM ATF MACHINE

• Zero Cross-Contamination - cleans the circuit with just 1 litre of oil and prevents £3295.00 • cross-contamination between different ATF oils Recirculation Function - prevents any over-pressure related damage • Automatic ATF Temperature Measurement - allows for flushing to start • Automatic automatically when oil conditions are ideal Flow Direction - provided by the pressure sensors • Automatic Pumps Flow-Rate Control - adapts the flushing speed to the transmission characteristics • Fully Automatic Operation - via in-built updatable vehicle database • Instructional Database - provides complete instructions for ATF flushing operation; oil grade, capacity, service points, connections • & adaptor information Pump Machine - for faster flushing control even on tricky transmissions • Twin New Oil Tanks - can easily be interchanged with quick change coupler • Dedicated Function Feature and Probe - allows oil changing via dipstick tubes where service can only be done through the oil refill • Dipstick hole as well as power steering fluid change Function - speeds up used ATF discharge in case of transmission equipped with low flow-rate pump • Boost Printer • and Additive Cannister - provided as standard Automatic Operation - via control panel with large LCD colour screen

REQUIRES ADAPTOR KIT 35083000 ADAPTOR KIT 1

£595.00

Applications Include: GM, Fiat, Ford, Jeep, Chrysler, Saab, Mercedes, BMW, Jaguar, Volvo, Land Rover, VW, Rover, Opel, Alfa Romeo* Standard model also available - part number 35081000

35083100 ADAPTOR KIT 2

adaptors also available separately See website for options

Applications Include:

product of the year 2018

Volvo, PSA Group, Renault, Jeep, Mitsubishi, GM, Suzuki, Toyota, Saab, Mercedes, Ssangyong, Audi, VW, BMW,

£595.00

Jaguar, Nissan, Daihatsu, Suzuki, Fiat, Lancia, Ford, Porsche, Alfa Romeo, Cadillac, Land Rover, Chrysler* *Model restrictions apply, see website for full application list

ADBLUE TRANSPORTATION TANKS

AVAILABLE IN 68L & 110L TANK SIZES

®

• For transportation and refuelling of AdBlue® equipped vehicles for car, van, light commercial, agricultural, construction and heavy commercial • Ideal workshops • Impact resistant polyethylene tank, UV stabilised and equipped with wheels suitable for easy transportation • Horizontal filling operation • Vented filling plug PART NO.

DESCRIPTION

TYPE

HOSE

TANK EMPTY WEIGHT

PRICE

36610100

AdBlue® Transport Tank - 68L Manual Pump

Plastic manual rotary pump with plastic manual nozzle

4m EPDM

11kg

£419.95

36610500

AdBlue® Transport Tank - 68L 12v DC Pump

12v DC pump - 30L/Min with plastic manual nozzle

4m EPDM

16kg

£624.95

36611000

AdBlue® Transport Tank - 110L 12v DC Pump

12v DC pump - 30L/Min with “Piusi” digital nozzle

3m EPDM

12kg

£1095.95

Fuel Extractor / Retriever Pneumatic Oil Extractors 36600500

£499.00

stainless steel 45l tank Applications:

fuel • Retrieve following a filling

error or removal of tank sender unit, changing or checking the fuel gauge, rinsing the fuel tank during body work etc.

via tank • Emptying filler neck or fuel lines

www.sykes-pickavant.com

Designed to meet the requirements of the modern workshop as well as health & safety issues / extract • Remove waste fluids or oil

53390000 PNEUMATIC OIL EXTRACTOR

£289.00

from an engine

best at oil • Works temp between 4060° with suction speeds of up to 6 litres per minute

•

Combined volume capacity of 90 litres (70L tank & 20L drain bowl)

pressure • Working 8-10 Bar by • Powered compressed air

13

Both Include:

• Adaptors for BMW,

Mercedes, VW and Citroen

•

4 x 700mm nylon tube probes with internal spring steel anti-kink wires

x 700mm • 2steel probes

53390500 PNEUMATIC OIL EXTRACTOR WITH 9 LITRE INSPECTION CHAMBER

£345.00 IDEAL FOR VEHICLES WITHOUT A SUMP PLUG 53390500 Includes:

• Inspection chamber to

ensure the suction feature is working correctly

• Anti-splash device WARNING: Do not use with corrosive or flammable products

01543 679900

air tools 1/4” - 3/4” available

IMPACT WRENCHES

design and ergonomically designed handle be configured for right and left handed use • Smart • Can Single-switch can be changed for easy forward or reverse operation Lightweight composite housing • Easily adjustable torque regulator • 3 step powermagnesium control • •

1/4”

3/8”

90203500

1/2”

1/2”

3/4”

COMPACT SIZE LOW AIR CONSUMPTION UP TO 90NM

7 VANES FOR EXTRA POWER UP TO 680NM

ULTRA SHORT BODY UP TO 680NM

7 VANES FOR EXTRA POWER UP TO 1600NM

ONLY 3.2KG UP TO 2600NM

£149.00

£209.00

£189.00

£219.00

£525.00

90202500

RUBBER BOOTS HELPS PROTECT IMPACT WRENCH FROM ACCIDENTAL DAMAGE FOR USE WITH 90201500 & 90202500

£15.95 90201100

90201000

UNIVERSAL AIR SWIVEL JOINT INLET 90220000 £19.95

90215000

• • •

For servicing air tools Includes: 1 x bottle of air tool oil 1 x tube of air tool grease Applicator nozzle Grease press

£21.95

FEATURES INTERNAL MEMBRANE *Impact wrench not included

90202100

FOR USE WITH 90202000

£20.95

COMBINED DEAL MICRO DIE GRINDER & BIT SET 902130SP

£199.00

• • • • •

2 x 360° rotation

Industrial quality Heat treated connecting screw

90210000

SIGNAL HOSE - 10MM (3/8”)

FOR USE WITH 90201000

Abrasion resistant outer cover

£34.95

Internal membrane prevents kinking & hardening High-visibilty hose to reduce trip hazard Working temp range: -40°c to +65°c Working pressure: 300psi

special

Break pressure: 1000psi Length: 10 metres

N.B. Hose supplied without fittings

90213500

offer

+

• •

MICRO DIE GRINDER BIT SET (5 PACK)

£89.00 • •

IDEAL FOR CUTTING SEIZED COMPONENTS, EXHAUST FITTINGS & LOCKING WHEEL NUTS

For use with Micro Die Grinder (90213000) Contains five shaped ends suitable for precision work

PART NO.

The latest generation mini composite device for small / fine grinding and milling - Includes 90213000 Micro Die Grinder & 90213500 5 pc. Bit Set

• • • • •

90202000

AIR TOOL SERVICE & LUBRICATION KIT

• • • •

90201600

£18.95

90201300

Ideal for use in confined spaces Provides perfect handling due to the ‘Bionigrip’ surface Minimal vibration and low noise Powerful mini device for small / fine grinding & milling 1/8” drive / 70,000 rpm

14

IMAGE

ALSO AVAILABLE - PACKS OF 3 LENGTH

DIAMETER

PRICE

902135-01

40mm

3mm

£53.95

902135-02

33mm

3mm / Sphere - 4mm

£54.95 £53.95

902135-03

40mm

3mm

902135-04

40mm

3mm

£53.95

902135-05

40mm

3mm

£53.95

SALES@sykes-pickavant.com

WHEELS special offer also available

inner rim cleaner 66195500

£54.95

66195500 INNER RIM CLEANER + WHEEL HUB GRINDING ATTACHMENT PACK For cleaning the wheel centring device and the attachment face between the wheel and hub, removes stubborn corrosion residues quickly and easily (3 - 25 second processing time per hub)

75mm

661922SP

For the optimal cleaning of the inner wheel contact surface

• • • • • • •

661927SP

160mm diameter Prevents corrosion related distortion of wheel bolt tightening torque Completely removes burnt in corrosion To be used only on the inside of an aluminium rim, particularly the inner area prior to wheel balancing The porous abrasives and cup shaped grinding plate ensures minimal dust Discs are attached with velcro, making them easy to replace Optimized for the latest wheel rims with an internal diameter of 75mm

+ +

SAVE: £6.95

£105.95 LIST PRICE: £112.90

3pc.

75mm

SAVE: £6.95

£106.95

ideal for bmw

LIST PRICE: £113.90

3pc.

BESTSELLER

wheel stud grinder - alu body 66194000

60mm

Special Grinder used to clean the wheel rim contact surface, designed for vehicles with stud bolts - corrosion is quickly and easily removed

£69.95

•

1 holder, 6 x 60mm discs & 5 x 40mm discs supplied

SPARE DISC PACKS ALSO AVAILABLE

66194200

£26.95

40mm

5pc.

60mm

66194300

£28.95

5pc.

5pc. 40mm spare discs for 66194000 5pc. 60mm spare discs for 66194000

CARBIDE SCRAPER KIT

UNIVERSAL TRIM TOOL

67000200

£69.95

TYRE TREAD DEPTH GAUGE

68010100

03280000

£9.95

£6.49

For use on gaskets, corrosion on brakes, paint and glue in hard to reach areas and carbon on the exhaust manifold Universal tool for the removal of unwanted build ups

• • •

Double edged blade gives you the ability to use the tool on both sides as a push or pull tool Ergonomically designed to fit comfortably in your hand High quality carbide tips give the tool a longer lifespan

www.sykes-pickavant.com

• • • • • •

Versatile tool with many uses Aids with the removal of rear cluster lights Can be used for removing stuck wheel weights or trim Ideal for removing door panels Ergonomic edge 3 sided blade

15

• • •

MOT approved gauge complete with pocket clip Measures 0 – 26mm in 1mm increments Inc. 1.6mm depth measurement for MOT regulations

01543 679900

WORKSHOP TOOLS

NEW GUARANTEED Unbreakable*

MECHANICS VICE - FIXED BASE • • • • •

High quality, heavy duty construction provides years of trouble free use

SWIVEL BASE FOR MECHANICS VICE

*Excluding jaws & handle

•

CNC machined components for excellent fit and durability Hardened and tempered finely ground jaws for superior grip Scratch resistant hammered blue finish Replacement parts available including jaws and handle

•

Lockable to most convenient angle Compatible with Mechanics Vice

SIZE (INCH)

JAW WIDTH (MM)

JAW OPENING (MM)

THROAT DEPTH (MM)

PRICE

PART NO.

COMPATIBLE VICE

PRICE

53320400

4”

102

132

74

£59.95

533204-B

53320400

£9.55

53320600

6”

153

206

95

£99.95

533206-B

53320600

£15.84

53320800

8”

203

225

105

£139.95

533208-B

53320800

£18.25

AIR/WATER

•

Allows 360° rotation of Mechanics Vice for better access

PART NO.

BESTSELLER

RETRACTABLE HOSE REELS • • •

•

AIR only

• • • • • • •

Spring driven retractable hose reel c/w wall mounting brackets Polypropylene case Suitable for compressed air or cold water up to 17 bar working pressure Heavy duty rubber air / water hose to ISO EN 2398 standard

Compact design PVC hose 180 degree pivoting wall bracket Polypropylene case Brass swivel assembly 53399600 - Suitable for compressed air up to 10 bar working pressure 53399700 - Suitable for compressed air up to 20 bar working pressure

PART NO.

SIZE

CONNECTION

LIST PRICE

OFFER PRICE

PART NO.

SIZE

CONNECTION

LIST PRICE

OFFER PRICE

53399000

20m x 10mm

3/8”

£279.95

£199.95

53399600

9m x 8mm

1/4”

£105.95

£74.95

53399100

18m x 12mm

1/2”

£279.95

£199.95

53399700

15m x 10mm

1/4”

£105.95

£89.95

HYBRID ULTRACAPACITOR BATTERY BOOSTER

NEW

341300SP

861002SP1

£395.00

• • • • • • • • • •

+

12v 1300 amp lightweight, compact & powerful Ultracapacitor Booster Pack with backup lithium battery Easy & Quick Recharge: hybrid technology allows booster to be charged from the vehicle’s battery or if highly discharged the backup lithium battery can be used instead, this takes 1 4 minutes depending on method used 10,000 Cycles / 10 Year Life Span Operating Temperature Range: -40°C +65°C Override Mode to start engine without any battery mounted Glow Mode for cold start of diesel engine Protection against short-circuits and reverse polarity Digital display shows capacitor charging level and vehicle’s battery voltage Rotomolded case with lifetime warranty Fully insulated Heavy-Duty curved clamps

hurry! limited stock available

SYKES-PICKAVANT EXCLUSIVE OFFER

£385.00

R TWO YEA

TY WARRAN

INCLUDES FREE ACCU-SMART WORTH £52.95 INCLUDES LIFETIME CASE WARRANTY & 2 YEAR BATTERY WARRANTY

Pro-Start 800 Booster Pack with Free 12v 4 Amp Accu-Smart Battery Charger

• 12v Pro-Start 800 Booster Pack with 800 cranking amps and 2370 peak amps • AGM internal batteries • Double insulated starting cables – 1.30/1.35 mtrs length • Illuminated voltmeter indicates booster charge level, booster and alternator function • Curved jaw clamps, fully insulated • Single-piece, shock resistant, moulded case

896124SP - Accu-Smart 12v 4 Amps Battery Charger

• Suitable for Wet (Lead Acid), AGM, Gel & Fleece type batteries 16

SALES@sykes-pickavant.com

Braking 12v Automatic Brake Bleeder

240v Electric Brake Bleeder

man operation for brake & clutch • One bleeding power OFF when min level reached • Auto Includes • screw typealuminium SP Euro cap - angled polarity warning • Reverse Stainless body • Pump c/wsteel auto off valve • 5L reservoir / 4mshut cable • 0 to 6 bar • ABS compatible •

man operation for brake & clutch • One bleeding resistant housing • Impact Long supply hose (3.2m) allows • for use with vehicle raised on a ramp Includes aluminium SP Euro cap - angled • screw type 10kg • Weight: bar • 0ABSto 6compatible •

343001V2

34400500

£529.00

£699.00

Flaremaster2 Brake Pipe Flaring Tool The Original Hand Held Automotive Brake Pipe Flaring Tool

02725000 Flaremaster2 Brake

02729500

Pipe Flaring Kit - 4.75mm

SAVE: £28.50

£140.50 chuck for • Quick-release LIST PRICE: £169.00 positive engagement of the punch

coarse thread • Fast-turn on hydraulic ram, for quick assembly

bolt with swivel pin, • Locking for fast tightening dies, held in • Inter-changeable place by magnets Enhanced bridge unit for • greater strength Re-designed, • handle ergonomic,

IN SITU SOLUTION

Flaremaster2 - Kit with Compatible Tools

£170.00 - Flaremaster2 • 02725000 LIST PRICE: £204.00 - Brake Pipe Aid Plier • 02160000 - Telescopic Pipe Tube Cutter: 3-32mm • 02210000 02730000 - Pipe Deburring Tool: 3.2-16mm •

moulding, for greater comfort

SAE & DIN single • Creates and double flares (4.75mm & 3/16” pipe)

BRAKE PIPE FLARING TOOLS - Combined DEAL 660926SP

for pipe • Adjustable diameters: 3-16mm

BRAKE PIPE COATING REMOVAL TOOL

(1/8”-5/8”)

protective • Allows nylon coating (seen in particular VAG and GM models) to be removed prior to flaring the brake pipe

‘bad • Prevents flares’ which occur when brake pipe is flared with coating on which can lead to leakage

BEFORE

WITHOUT USING TOOL

www.sykes-pickavant.com

SAVE: £34.00

Includes:

AFTER

USING TOOL

17

special

offer

+

NEW

COATED BRAKE PIPE DIES

02720300

GRIP TEXTURE

SAVE: £9.95

£39.95 LIST PRICE: £49.90

pipe • Enables to be flared

without puncturing plastic coating

textured • New design allows

coated brake pipe to be easily gripped

01543 679900

Braking Air Assisted Caliper Piston Wind Back Tool Kit Brake Caliper Cleaning Files 03614000

Scraping file for removal of course residue on brake calipers

scraping surface saves time and is more • Special effective than standard files because the coarse tooth

operated ram applies pressure • Air to the caliper piston, while the

design will not clog

handle is rotated by hand

• – works on both RH • Reversible and LH applications be used on Wind Back and • Can Push Back pistons with nine adaptors • Supplied which cover a wide range of

Easy to use – works on standard workshop air supply

03620100

SAVE: £7.00

£29.95 LIST PRICE: £36.95

popular vehicles (applications list included)

03620200

supplied with 3/8” converter • Also to use with adaptors from manual

SAVE: £7.00

£31.95 LIST PRICE: £38.95

SAVE: £15.00

£89.95

kit (03619200)

LIST PRICE: £104.95

SPECIAL EXTRA SLIM MODEL FOR JAPANESE VEHICLES

‘270’ Series Brake Pipe Flaring Tools Speed, Accuracy and Reliability & imperial pipe sizes 02700100 • Metric From 3/16” to 1/2” £165.00 • From 4.75mm to 12mm BRAKE PIPE FLARING KIT • Produces both Convex and • Double Lap flares to SAE and DIN • SAVE: £34.00

LIST PRICE: £199.00

Suitable for brake pipe sizes:

SAE Single & Double Lap flares - 3/16” & 4.75mm

02700800

standards

SAVE: £55.00

‘ Dial-a-Size’ Turret design BRAKE PIPE FLARING KIT • Unique Lever cam • flaring operation for quick • punch extraction from • Automatic flare • Screw clamp for accurate die • alignment 02700900 BRAKE PIPE FLARING KIT of kits available to suit • Variety requirements components available • • All individually •

£275.00 LIST PRICE: £330.00

Suitable for brake pipe sizes:

SAE Single and Double flares - 3/16, 1/4, 5/16, 3/8, 1/2”, 4.75, 6, 8, 10, 12mm DIN Single flares - 4.75mm SAVE: £40.00

£190.00 LIST PRICE: £230.00

Suitable for brake pipe sizes:

SAE Single and Double flares - 3/16, 1/4”, 4.75, 6mm DIN Single flares - 4.75mm

66092500

MINI PIPE TUBE CUTTER 3 - 25MM

BRAKE PIPE CORROSION TOOL SAVE: £3.20

SAVE: £1.50

£15.75

£7.45

LIST PRICE: £18.95

LIST PRICE: £8.95

• •

BRAKE PIPE AID PLIERS

SAVE: £5.45

£26.50 LIST PRICE: £31.95

One-hand operation, ideal for on-the-vehicle working Suitable for use on pipes from 3 - 25mm

• • • •

02160000 For forming tight bends in brake and clutch pipes Ideal for use in restricted space and for use on-the-vehicle Can also be used for quick tube nut thread alignment and as a guide when cutting tube For 3/16” or 4.75mm pipe

• •

02340000 This tool has been especially designed to allow the user to inspect brake pipes for corrosion, both quickly and easily It features two scraper areas on the head of the tool, which allows the user to remove dirt and corrosion from the pipes, and thereby be able to effectively examine the condition of the pipes

02730000 PIPE DEBURRING TOOL - 3.2-16MM Essential tool when preparing flare copper • brake pipe, to avoid the risk of toswarf in the £8.25 pipe ended tool for the deburring of Brake • Double & Fuel Pipes when preparing ends for use on all types of copper, steel and brass • Works pipes • Pipe Sizes: 1/8” (3.2mm) to 5/8” (16mm) SAVE: £1.74

LIST PRICE: £9.99

18

SALES@sykes-pickavant.com

pullers Slide Hammers & Split Collet Extractors components quickly and efficiently when conventional pullers cannot be used • E Rxtract emoves bearings, oil seals etc.

• 09580100

09580200 12-30mm

6.5 -12mm

09580000

£486.95 £114.95

09580300

09580400 8.5 -22mm

£259.95

fast fit MICRO PULLER

6.5 -60mm

£148.95

30-60mm

FIND OUT MORE HERE!

£177.95

08215000 4 WAY MINI PULLER

08245000

£65.95

• • • • • • •

For rapid removal of small bearings Covers a wide range of automotive and engineering applications including: alternators/generators, domestic appliances, power tools and pumps Self-centring force screw with ‘T’ bar and 13mm hexagon drive

• • • • •

Drop forged legs with independent leaf springs Securing collar tightens under load for positive, non slip pulling action Suitable for ISO referenced bearings 1 tonne capacity

£46.95

Ideal for windscreen wiper arms

Unique 4 way design allows for 4 different jaw widths to be selected Reversible and interchangeable legs Removable centrepiece for wider application coverage Capacity from 19-36mm

mechanical Twin/Triple Leg Puller Kit Hydraulic Twin/Triple Leg Puller Kit 14500300

£173.95

4 tonne removing gears, races, bearings and • For sprockets on automotive / industrial

• • • •

applications

Makes 3 different twin/triple leg pullers Spread: 50 - 150mm Reach: 150mm Supplied in cardboard box

• • • • • •

15500300

For removing gears, races, bearings and sprockets on automotive / industrial applications

£212.95

8 tonne

Makes 3 different twin/triple leg pullers Spread: 75 - 150mm Reach: 150mm Supplied in cardboard box Also available in metal case as p/n 15500000

MADE IN THE UK

www.sykes-pickavant.com 01543 679900 Sykes-Pickavant Ltd, Unit 4 Cannel Road, Burntwood Business Park, Burntwood, Staffordshire, WS7 3FU. United Kingdom Tel: +44 (0) 1543 679900 Fax: +44 (0) 1543 679901 e-mail: sales@sykes-pickavant.com www.sykes-pickavant.com ALL PRICES QUOTED EXCLUDE VAT & ARE SUBJECT TO AVAILABILITY - E&OE PRICES VALID UNTIL 31ST AUGUST 2018 - REF: SP218GBP COPYRIGHT 2018 - SYKES-PICKAVANT LTD. ALL RIGHTS RESERVED

Distributor Stamp: