Insize Catalogue

NAV Imports Australia Pty Ltd

METALTECH

Metals Product Catalogue Version 1 NAV Imports Australia Pty Ltd 5-6 Ormsby Place, Wetherill Park NSW 2164 P: (02) 9757 1751 | F: (02) 9757 1757 E: sales@navimportsaustralia.com.au W: www.navimportsaustralia.com.au

www.navimportsaustralia.com.au

Introduction Welcome to our new Insize, Metaltech Grip and Pittsburg catalogue containing over 500 products. This catalogue demonstrates our comprehensive, growing range and will prove to be of a great assistance when ordering our products.

Products are listed by major sections. Please note that specifications and details as shown are believed to be correct and subject to commercial tolerances at the time of printing. However, there are some occasions beyond our control, where we reserve the right to offer goods of similar quality or in alternative packaging.

Update sheets will be issued regularly for new product releases to keep this catalogue continually up to date, and your feedback on our products and services is always valued and welcomed.

This catalogue replaces all previous catalogues.

Insize, Metaltech, Grip & Pittsburg Warranty Terms and Conditions Insize & Metaltech products are warranted against defects in workmanship and materials and will be repaired or replaced free of charge.

This warranty in no way covers modified, abused, neglected or excessively worn products as a result of misuse or general wear and tear. Any product subject to a claim must be assessed by a NAV Imports distributor and/or representative and if the claim is accepted, the product will be repaired or replaced free of charge.

In the event that the accepted product cannot be repaired or replaced, a credit will be raised for the full amount of the purchase.

NAV Imports Aust. Pty Ltd places responsibility on the distributor to use knowledge and judgment as to the approval or replacement of the defective product should it occur.

Any product claimed for warranty must be returned to NAV Imports warehouse where possible at retailers’ expense (freight charges will be reimbursed if product is deemed to be faulty) and subject to negotiation for evaluation with appropriate paperwork and date of supply.

Returns will not be accepted without prior notice.

Most products are covered by 12 months warranty from date of resellers’ sale with the exception of the following; Please note: Consumable and products subject to wear and tear such as cutting tools, pilot pins, grinding wheels, drills etc are NOT covered by warranty. Repairs, tampering or modification carried out by unauthorised personnel will void all warranty.

2

www.navimportsaustralia.com.au

METALTECH Contents: Introduction......................................................................................................................................................Page 2 Insize, Metaltech, Grip & Pittsburg introduction Warranty Terms and Conditions......................Page 2 Jobber Drills & Drill Sets...............................................................................................................................Page 4 - 6 Jobber Drills & Turning Tool Sets...............................................................................................................Page 7 Left hand, Drill Set and End Mills...............................................................................................................Page 8 Bi - Metal Holesaws and Arbors...................................................................................................................Page 9 Core Drill and Broach Cutters......................................................................................................................Page 10 Insize Carbide Burrs.......................................................................................................................................Page 11 Insize Carbide Burrs & Torsion Philips Bit Sets......................................................................................Page 12 Insize Step Drills & Countersinks...............................................................................................................Page 13 Insize SDS Drills...............................................................................................................................................Page 14 Insize Bench Drill and Pedestial Drill Presses.........................................................................................Page 15 Bench Drill and Pedestial Drill Presses & Keyless Chucks..................................................................Page 16 Chuck Arbors, Drill Sleeves & Insize Live Centres.................................................................................Page 17 Pittsburg Fans...................................................................................................................................................Page 18 Metaltech Metal Working Machines...........................................................................................................Page 19 - 25 Manual Sheet Metal Slip Rolls......................................................................................................................Page 21 Metaltech Welding Machines.......................................................................................................................Page 26 - 27 Metaltech Welding Accessories...................................................................................................................Page 28 Metaltech Industrial Bench Grinders and Disc Sander........................................................................Page 29 The Metaltech Industrial Belt, Disc Sander & Wet Sharpener.............................................................Page 30 Industrial Sandblasting Cabinets................................................................................................................Page 31-32 Metaltech Industrial Sandblaster Cabinet & Accessories.....................................................................Page 33 Sand & Soda Blasters.......................................................................................................................................Page 34 Metaltech 7 Gallon Portable Soda Blaster..................................................................................................Page 35 Metaltech Replacement Nozzle Sets...........................................................................................................Page 36 Deadman Safety Gun, Replacement Nozzles & Sandblaster Accessories.........................................Page 37 Garnet Mesh, Glass Beads & Sodium Bicarbonate Soda .......................................................................Page 38 Sandblaster Accessories.................................................................................................................................Page 39-40 Grip Castors and Wheels................................................................................................................................Page 41-56 Grip Material Handling Equipment.............................................................................................................Page 57 Grip Material Handling, Measuring & Engineering Equipment..........................................................Page 58 Grip Cutting, Measuring & Engineering.....................................................................................................Page 59-63 Index - List of items..........................................................................................................................................Page 64-68

3

www.navimportsaustralia.com.au

Jobber Drills & Drill Sets Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter.

Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood.

Drills are manufactured to comply to DIN338 standard. Set supplied in display case.

Jobber Drill Sets Metric Part No. IN0001

IN0002

Jobber Drill Sets Fractional

Product Name

Sizes

Barcode

19 Pc Drill Bits Set

1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5 and 10mm

9335319022537

25 Pc Drill Bits Set

1, 1.5, 2, 2.5, 3, 3.5, 4, 4.5, 5, 5.5, 6, 6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 10.5, 11, 11.5, 12, 12.5 and 13mm

9335319022544

Part No.

Product Name

Sizes

Barcode

IN0101

21 Pc Drill Bits Set

1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64 and 3/8”

9335319022889

29 Pc Drill Bits Set

1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4, 17/64, 9/32, 19/64, 5/16, 21/64, 11/32, 23/64, 3/8, 25/64, 13/32, 27/64, 7/16, 29/64, 15/32, 31/64 and 1/2”

9335319022896

IN0102

1/2" REDUCED SHANK DRILL BIT SET

Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood.

Drills are manufactured to comply to DIN338 standard. Sets supplied in metal storage case.

1/2" Reduced Shank Drill Bit

Jobber Drill Sets Metric / Fractional

4

Diameter

Qty per Pack

Barcode

IN0035

13mm

1

9335319022803

IN0037

14mm

1

9335319022810

IN0038

15mm

1

9335319022827

IN0039

16mm

1

9335319022834

IN0041

18mm

1

9335319022841

IN0043

20mm

1

9335319022858

IN0045

22mm

1

9335319022865

IN0048

25mm

1

9335319022872

1/2" Reduced Shank Drill Bit Part No.

Diameter

Qty per Pack

Barcode

IN0140

9/16"

1

9335319023206

13, 14, 15, 16, 18, 20, 22 and 25mm

IN0141

5/8"

1

9335319023213

IN0142

11/16"

1

9335319023220

9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16 and 1”

IN0143

3/4"

1

9335319023237

IN0144

13/16"

1

9335319023244

IN0145

7/8"

1

9335319023251

IN0146

15/16"

1

9335319023268

IN0147

1"

1

9335319023275

Part No.

Product Name

Sizes

IN0003

8 Pc Reduced Shank Drill Bits Set Metric 8 Pc Reduced Shank Drill Bits Fractional

IN0103

Part No.

www.navimportsaustralia.com.au

Jobber Drills & Drill Sets Bright finish, HSS M2 grade drill bits are precision ground with a 135 degree split point for self-starter. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard. Supplied in hang cell case.

Jobbers Drills Metric

Jobbers Drills Fractional

Part No.

Diameter

Qty per Pack

Barcode

Part No.

Diameter

Qty per Pack

Barcode

IN0011

1mm

10

9335319022568

IN0111

1/16”

10

9335319022919

IN0012

1.5mm

10

9335319022575

IN0112

5/64”

10

9335319022926

IN0013

2mm

10

9335319022582

IN0113

3/32”

10

9335319022933

IN0014

2.5mm

10

9335319022599

IN0114

7/64”

10

9335319022940

IN0015

3mm

10

9335319022605

IN0115

1/8”

10

9335319022957

IN0016

3.5mm

10

9335319022612

IN0116

9/64”

10

9335319022964

IN0017

4mm

10

9335319022629

IN0117

5/32”

10

9335319022971

IN0018

4.5mm

10

9335319022636

IN0118

11/64”

10

9335319022988

IN0019

5mm

10

9335319022643

IN0119

3/16”

10

9335319022995

IN0020

5.5mm

10

9335319022650

IN0120

13/64”

10

9335319023008

IN0021

6mm

10

9335319022667

IN0121

7/32”

10

9335319023015

IN0022

6.5mm

5

9335319022674

IN0122

15/64”

10

9335319023022

IN0023

7mm

5

9335319022681

IN0123

1/4”

5

9335319023039

IN0024

7.5mm

5

9335319022698

IN0124

17/64”

5

9335319023046

IN0025

8mm

5

9335319022704

IN0125

9/62”

5

9335319023053

IN0026

8.5mm

5

9335319022711

IN0126

19/64”

5

9335319023060

IN0027

9mm

5

9335319022728

IN0127

5/16”

5

9335319023077

IN0028

9.5mm

5

9335319022735

IN0128

21/64”

5

9335319023084

IN0029

10mm

5

9335319022742

IN0129

11/32”

5

9335319023091

IN0030

10.5mm

1

9335319022759

IN0130

23/64”

5

9335319023107

IN0031

11mm

1

9335319022766

IN0131

3/8”

5

9335319023114

IN0032

11.5mm

1

9335319022773

IN0132

25/64”

5

9335319023121

IN0033

12mm

1

9335319022780

IN0133

13/32”

1

9335319023138

IN0034

12.5mm

1

9335319022797

IN0134

27/64”

1

9335319023145

IN0035

13mm

1

9335319022803

IN0135

7/16”

1

9335319023152

IN0136

29/64”

1

9335319023169

IN0137

15/32”

1

9335319023176

IN0138

31/64”

1

9335319023183

IN0139

1/2”

1

9335319023190

5

www.navimportsaustralia.com.au

Jobber Drills & Drill Sets Bright finish, HSS M2 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood.

Drill in accordance with DIN338 standard.

HSS M2 Drill Bit Single (Blister Card) Part No.

HSS M2 Drill Bit Twin Pack (Blister Card)

Diameter

Qty per Pack

Barcode

IN0070

3.2mm

1

93335319028768

IN0071

3.5mm

1

9335319028126

4mm

1

9335319028133

Part No.

Diameter

Qty per Pack

Barcode

IN0065

1mm

2

9335319028072

IN0072

IN0066

1.5mm

2

9335319028089

IN0073

4.2mm

1

93335319028775

IN0067

2mm

2

9335319028096

IN0074

4.5mm

1

9335319028140

IN0068

2.5mm

2

9335319028102

IN0075

5mm

1

9335319028157

IN0069

3mm

2

9335319028119

IN0076

5.5mm

1

9335319028164

IN0077

6mm

1

9335319028171

IN0078

6.5mm

1

9335319028188

IN0079

7mm

1

9335319028195

IN0080

7.5mm

1

9335319028201

IN0081

8mm

1

9335319028218

IN0082

8.5mm

1

9335319028225

IN0083

9mm

1

9335319028232

IN0084

9.5mm

1

9335319028249

IN0085

10mm

1

9335319028256

Dark matt finish, HSS Cobalt 5% M35 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood. Drill in accordance with DIN338 standard.

Cobalt HSS Drill Bit Single (Blister Card) Cobalt HSS Drill Bit Twin Pack (Blister Card)

Part No.

Part No.

Diameter

Qty per Pack

Barcode

IN0213

IN0201

1mm

2

9335319028263

IN0214

IN0202

1.5mm

2

9335319028270

IN0215

Qty per Pack

Barcode

6mm

1

9335319028362

6.5mm

1

9335319028379

7mm

1

9335319028386

IN0203

2mm

2

9335319028287

IN0216

7.5mm

1

9335319028393

IN0204

2.5mm

2

9335319028294

IN0217

8mm

1

9335319028409

IN0205

3mm

2

9335319028300

Cobalt HSS Drill Bit Single (Blister Card)

6

Diameter

IN0218

8.5mm

1

9335319028416

IN0219

9mm

1

9335319028423

IN0220

9.5mm

1

9335319028430

IN0221

10mm

1

9335319028447

IN0222

10.5mm

1

9335319028454 9335319028461

IN0223

11mm

1

Part No.

Diameter

Qty per Pack

Barcode

IN0224

11.5mm

1

9335319028478

IN0207

3.5mm

1

9335319028317

IN0225

12mm

1

9335319028485

IN0208

4mm

1

9335319028324

IN0226

12.5mm

1

9335319028492

IN0209

4.2mm

1

93335319028799

IN0227

13mm

1

9335319028508

IN0210

4.5mm

1

9335319028331

IN0211

5mm

1

9335319028348

IN0212

5.5mm

1

9335319028355

www.navimportsaustralia.com.au

Jobber Drills & Turning Tool Sets Bright finish, HSS M2 drill bits are precision ground with 135 degree split point for self-starter. Flute Type 30 Degree Helix. Quick and efficient swarf clearance allows clog-free precision drilling. Ideal for use on metals, plastics and wood.

Drill in accordance with DIN340 standard.

HSS M2 Long Series Drill Bit Twin Pack (Blister Card) Part No.

Diameter

Barcode

IN0402

2x85mm

9335319028515

IN0403

2.5x95mm

9335319028522

IN0404

3.0x100

9335319028539

HSS M2 Long Series Drill Bit Single Pack (Blister Card)

Turning Tool Sets

7Pc Metal Lathe Tool Set Item No:

MTLT710

Specifications Indexable tungsten tools on 10mm square bodies Kit Contents: 1 x right hand Parting Tool 1 x Threading Tool 1 x right hand Roughing Turning Tool 1 x left hand 90ยบ Turning Tool 1 x right hand 90ยบ Turning Tool 1 x straight Profile Turning Tool 1 x right hand Profile Turning Tool

Part No.

Diameter

Barcode

IN0405

3.5x112mm

9335319028546

IN0406

4x119mm

9335319028553

IN0407

4.5x119mm

9335319028560

IN0408

5x132mm

9335319028577

IN0409

5.5x139mm

9335319028584

IN0410

6x139mm

9335319028591

IN0411

6.5x148mm

9335319028607

IN0412

7.0x156mm

9335319028614

IN0413

7.5x156mm

9335319028621

IN0414

8.0x165mm

9335319028638

IN0415

8.5x165mm

9335319028645

IN0416

9.0x175mm

9335319028652

IN0417

9.5x175mm

9335319028669

IN0418

10.0x184mm

9335319028676

IN0419

10.5x184mm

9335319028683

IN0420

11.0x195mm

9335319028690

IN0421

11.5x195mm

9335319028706

IN0422

12.0x205mm

9335319028713

IN0423

12.5x205mm

9335319028720

IN0424

13.0x205mm

9335319028737

9Pc Metal Lathe Tool Set Barcode:

Item No:

MTLT912

Specifications

Barcode:

Indexable tungsten tools on 12mm square bodies. Supplied in hand carry case Kit Contents: 1x Turning, Facing, Boring tool, (PSSNR) 2x Facing, Boring Bars, (PWUNR, PWKNR) 1x Internal Tthreading Tool, (LN) 1x External Threading tool, (LW) 1x Parting,Grooving Tool, (QA) 3x Various Angle Turning Tools, (PSSNR, PSBNR, PWGNR) 1x Allen Key 1x Screwdriver 1x Wooden Case

7

www.navimportsaustralia.com.au

Left hand, Drill Set and End Mills Left hand drill bits are primarily used for drilling out jammed or rusted bolts, studs etc. They will sometimes cause the thread to "walk out". The principle is the same as "screw extractors� or “Ezy-outs". Bright finish, HSS M2 grade drill bits are precision ground with a 118 degree split point. Quick and efficient swarf clearance allows clog-free precision drilling.

Ideal for use on metals, copper, plastics and wood. Drills are manufactured to comply to DIN338 standard.

Sets are supplied in heavy duty case.

Left Hand Drill Bit Set Part No.

IN0004

Product Name 15 Pc HSS M2 Left Hand Drill Bit Set

HSS M2 Pilot Drill Bit Sizes Sizes: 1.5, 2, 3, 4, 4.5, 5.5, 6, 7, 7.5, 8.5, 9.5,10, 11,11.5 and 12.5 mm.

Barcode

Part No.

Size

Barcode

IN0063

6.35 x 75mm

9335319001808

9335319008531

HSS M2 End Mill and Slot Drill Sets. Suitable for small workshops and hobby work manufactured from high speed steel with finite coated finish. Mill cutter with a range of both slot drills and mills.

20 Pc HSS M2 End Mill and Slot Drill Set

8

Product No.

Slot Drill Sizes

End Mill Sizes

GEM20

3, 4, 5, 6, 8, 10, 12, 14, 18 and 20mm

3, 4, 5, 6, 8, 10, 12, 14, 18 and 20mm

Barcode

9335319001419

12Pc HSS M2 End Mill and Slot Drill Set Product No.

Slot Drill Sizes

End Mill Sizes

Barcode

IN-12

3,4,6,8,10 & 12mm

3,4,6,8,10 & 12mm

9335319025248

www.navimportsaustralia.com.au

Bi - Metal Holesaws and Arbors Bi - Metal HSS Holesaws are ideal for cutting Cast Iron, Non-ferrous materials, wood, nail embedded wood, and plastic.

Cutting Depth: 38mm (1-1/2”). Variable Pitch Teeth to reduce harmonic vibration and helps make precision cuts.

8% Cobalt content gives longer life.

Bi - Metal HSS Holesaws

Bi - Metal HSS Holesaws

Part No.

Size

Thread

Barcode

Part No

Size

Thread

Barcode

INBMHS14

14mm

1/2"

9335319027037

INBMHS64

64mm

5/8"

9335319027358

9335319027075

INBMHS65

65mm

5/8"

9335319027365

67mm

5/8"

9335319027372

INBMHS16

16mm

1/2"

INBMHS17

17mm

1/2"

9335319027082

INBMHS67

INBMHS19

19mm

1/2"

9335319027099

INBMHS68

68mm

5/8"

9335319027389

70mm

5/8"

9335319027396

INBMHS20

20mm

1/2"

9335319027105

INBMHS70

INBMHS21

21mm

1/2"

9335319027112

INBMHS73

73mm

5/8"

9335319027402

INBMHS76

76mm

5/8"

9335319027419

INBMHS22

22mm

1/2"

9335319027129

INBMHS24

24mm

1/2"

9335319027136

INBMHS79

79mm

5/8"

9335319027426

INBMHS83

83mm

5/8"

9335319027433

INBMHS25

25mm

1/2"

9335319027143

INBMHS27

27mm

1/2"

9335319027150

INBMHS86

86mm

5/8"

9335319027440

89mm

5/8"

9335319027457 9335319027464

INBMHS29

29mm

1/2"

9335319027167

INBMHS89

INBMHS30

30mm

1/2"

9335319027174

INBMHS92

92mm

5/8"

9335319027181

INBMHS95

95mm

5/8"

9335319027471

INBMHS98

98mm

5/8"

9335319027488 9335319026962

INBMHS32

32mm

5/8"

INBMHS33

33mm

5/8"

9335319027198

INBMHS35

35mm

5/8"

9335319027204

INBMHS102

102mm

5/8"

9335319027211

INBMHS105

105mm

5/8"

9335319026979

108mm

5/8"

9335319026986

111mm

5/8"

9335319026993 9335319027006

INBMHS37

37mm

5/8"

INBMHS38

38mm

5/8"

9335319027228

INBMHS108

INBMHS40

40mm

5/8"

9335319027235

INBMHS111

INBMHS41

41mm

5/8"

9335319027242

INBMHS114

114mm

5/8"

9335319027259

INBMHS121

121mm

5/8"

9335319027013

127mm

5/8"

9335319027020 9335319027044

INBMHS43

43mm

5/8"

INBMHS44

44mm

5/8"

9335319027266

INBMHS127

INBMHS46

46mm

5/8"

9335319027273

INBMHS140

140mm

5/8"

INBMHS48

48mm

5/8"

9335319027280

INBMHS146

146mm

5/8"

9335319027051

INBMHS152

152mm

5/8"

9335319027068

INBMHS51

51mm

5/8"

9335319027297

INBMHS52

52mm

5/8"

9335319027303

INBMHS54

54mm

5/8"

9335319027310

INBMHS57

57mm

5/8"

9335319027327

INBMHS59

59mm

5/8"

9335319027334

INBMHS60

60mm

5/8"

9335319027341

Arbor for Bi-Metal Hole Part No.

Size

Shank Size

Barcode

INAR1430

Saw Sizes 14-30mm

3/8" HEX

9335319001808

INAR32200

Saw Sizes 32-200mm

7/16" HEX

9335319001815

9

www.navimportsaustralia.com.au

Core Drill and Broach Cutters HSS broach cutters are used on portable magnetic base drills. Industrial grade high speed steel precision manufactured. Peripheral cutting with no dead points provide smooth efficient cuts. Superior tooth geometry provides single pass, timely cutting without the need of a pilot hole. Standard 19mm multi - shank universal mounting fitment.

HSS Broach Cutter

HSS Broach Cutter

Part No.

Size

Drill Depth

Shank Size

Barcode

Part No.

Size

Drill Depth

Shank Size

Barcode

IN-1250

12mm

50mm

19mm

9335319026726

IN-1225

12mm

25mm

19mm

9335319026719 9335319026733

IN-1450

14mm

50mm

19mm

9335319025781

IN-1425

14mm

25mm

19mm

IN-1650

16mm

50mm

19mm

9335319025798

IN-1625

16mm

25mm

19mm

9335319026740

IN-1850

18mm

50mm

19mm

9335319025804

IN-1825

18mm

25mm

19mm

9335319026757

IN-2050

20mm

50mm

19mm

9335319025811

IN-2025

20mm

25mm

19mm

9335319026764

IN-2250

22mm

50mm

19mm

9335319025828

IN-2225

22mm

25mm

19mm

9335319026771

IN-2450

24mm

50mm

19mm

9335319025835

IN-2425

24mm

25mm

19mm

9335319026788

IN-2525

25mm

50mm

19mm

9335319026795

IN-2525

25mm

25mm

19mm

9335319026795

IN-2550

25mm

50mm

19mm

9335319026801

IN-2625

26mm

25mm

19mm

9335319026818

IN-2650

26mm

50mm

19mm

9335319026825

IN-2825

28mm

25mm

19mm

9335319026832

IN-2850

28mm

50mm

19mm

9335319026849

IN-3025

30mm

25mm

19mm

9335319026856

IN-3050

30mm

50mm

19mm

9335319026863

IN-3225

32mm

25mm

19mm

9335319026870

IN-3225

32mm

50mm

19mm

9335319026870

IN-3325

33mm

25mm

19mm

9335319026894

IN-3250

32mm

50mm

19mm

9335319026887

IN-3425

34mm

25mm

19mm

9335319026917

IN-3350

33mm

50mm

19mm

9335319026900

IN-3450

34mm

50mm

19mm

9335319026924

IN-3650

36mm

50mm

19mm

9335319026931

IN-3850

38mm

50mm

19mm

9335319026948

IN-4050

40mm

50mm

19mm

9335319026955

7Pc 25mm Deep Cut Broach Cutter Set Part No.

Specifications

Barcode

BOH-071925

6 - Piece Set (14, 16, 18, 20, 22 & 24mm) with 19mm universal shank, 25mm depth of cut.Supplied in plastic carry case. Includes: 1 x 6.35mm (1/4”) locating pin.

9335319001853

Locating Pins Magnetic Base Core Drill Part No.

Size

Watt

BOH-32

up to 32mm

1550

BOH-42

up to 42mm

1700

10

Capable, Tough, Accurate, Powerful and Reliable the Bohrer is in a class of it's own, specifically designed in Germany with safe heavy duty use in mind.

Part No.

Size

Drill Depth

Barcode

IN-635103

Ø6.34mm

103mm

9335319008012

IN-63577

Ø6.34mm

77mm

9335319028041

www.navimportsaustralia.com.au

Insize Carbide Burrs Insize Carbide Burrs are manufactured to industrial Quality Standards. They are suitable for Steel, Cast Iron, Brass, Copper, Aluminium, Non Ferrous Metals and plastic. The stock removal is rapid in both hard and soft materials due to the double cut style. All Burrs have a 6mm shank. Used in air and electric die grinders. Individual burrs are supplied in hang cell packaging with barcodes.

IN-05106 5Pc Tungsten Carbide Burrs Set Set Contents: INSB-3

Cylindrical With End Cut Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Peripheral and Face Milling.

INSC-3

Cylindrical Ball Nose Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Surface Milling and Contouring.

INSF-3

Tree Shape with Radius End Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Application - Narrow Contouring.

INSG-3

Tree Shape with Pointed End Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Applications - Milling, Narrow Contouring and Acute Angle Milling.

INSL-3

Taper Radius End Size: 10 x 25 x 65mm (Diameter x Cutting Length x Total Length) Applications - Narrow Contouring and Surface Machining.

Individual Carbide Burrs Double Cut Cylindrical Shape Carbide Burr Double Cut Application - Deburring.

INSA-2 INSA-3 INSA-5

Size 8 x 20 x 65 mm (Diameter x Cutting Length x Total Length) Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)

Cylindrical Shape Carbide Burr Double Cut With End Cut Applications - Peripheral Milling and Face Milling.

INSB-3 INSB-5

Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)

Cylindrical Ball Nose Shape Carbide Burr Double Cut Applications - Surface Milling and Contouring.

INSC-2 INSC-3 INSC-5

Size: 8 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size: 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size: 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)

Ball Shape Carbide Burr Double Cut Applications - Hole Deburring, Contouring and Build-Up Welding Preparation.

INSD-2 INSD-3 INSD-5

Size: 8 x 7 x 52mm (Diameter x Cutting Length x Total Length) Size: 10 x 9 x 54mm (Diameter x Cutting Length x Total Length) Size: 12 x 10 x 56mm (Diameter x Cutting Length x Total Length)

Oval Shape Carbide Burr Double Cut Application - Contouring.

INSE-3

Size 10 x 16 x 61mm (Diameter x Cutting Length x Total (Length)

Tree Shape with Radius End Carbide Burr Double Cut Application - Narrow Contouring.

INSF-3 INSF-5

Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length) Size 12 x 25 x 70mm (Diameter x Cutting Length x Total Length)

11

www.navimportsaustralia.com.au

Insize Carbide Burrs & Torsion Philips Bit Sets Insize Carbide Burrs are manufactured to industrial Quality Standards. They are suitable for Steel, Cast Iron, Brass, Copper, Aluminium, Non Ferrous Metals and plastic. The stock removal is rapid in both hard and soft materials due to double cut style. All Burrs have a 6mm shank. Used in air and electric die grinders. Individual burrs are supplied in hang cell packaging with barcodes.

Tree Shape with Pointed End Carbide Burr Double Cut Applications - Milling, Narrow Contouring and Acute Angle Milling.

Flame Shape Carbide Burr Double Cut Applications - Contouring and Milling.

Taper with Radius End Carbide Burr Double Cut Applications - Narrow Contouring, Surface Machining and Surface.

Pointed Cone Shape Carbide Burr Double Cut Applications - Narrow Contouring, Surface Machining.

Inverted Taper Carbide Burr Double Cut Applications - Removing and Deburring

INSG-3

Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)

INSH-2 INSH-5

Size 8 x 20 x 63 mm (Diameter x Cutting Length x Total Length) Size 12 x 32 x 76mm (Diameter x Cutting Length x Total Length)

INSL-3

Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)

INSM-3

Size 10 x 20 x 65mm (Diameter x Cutting Length x Total Length)

INSN-1

Size 6 x 52 x 52mm (Diameter x Cutting Length x Total Length)

Insize Torsion Philips Bit Sets are used in cordless power impact screwdrivers.

Manufactured from S3 grade steel with a unique inbuilt torsion zone that delivers the ability to absorb 3 times the shock of a normal screwdriver bit. Their precision fit #2 tip prevents slippage, wobble and provides longer service life.

2Pc PH2x150mm Torsion Philips Bit Set Part No.

Specifications

INPH2150

1/4" hex shank #2 Phillips 150mm(6") length

10 Pc#2 Torsion Power Impact Driver Bits

5 Pc#2 Torsion Power Impact Driver Bits

Part No.

Specifications

Part No.

Specifications

INPH2251

1/4" Hex shank #2 Phillips 25mm (1") length

INPH2505

1/4" hex shank #2 phillips 50mm (2") length

12

www.navimportsaustralia.com.au

Insize Step Drills & Countersinks Insize step drills have multipurpose use. These step drills are designed for drilling and deburring repetitive holes in Aluminium, Brass, Copper, Steel, Plastic, Plexiglas, laminates and many other thin materials. Insize step drills are used by sheet metal workers, auto mechanics, electricians and the serious handyman. Manufactured from premium quality high speed steel with a double fluted ground cutting edge.

3 Pcs HSSM2 Straight Flute Step Drill Set Part No.

Product Name

Barcode

INSD-03

3 Pcs HSSM2 Straight Flute Step Drill Set

9335319027495

INSD4-12

Size: 4 - 12mm

9335319027501

INSD4-20

Size: 4 - 20mm

9335319027518

INSD4-32

Size: 4 - 32mm

9335319027525

Insize Countersinks are made from 100% M42 Cobalt High Speed Steel. They are used for countersinking, holes and deburring in a wide variety of materials including ferrous and non-ferrous metals. The triple wide angled fluted design is self-centering allowing the user to provide a heavy chamfer in the entrance of a drilled hole. This heavy chamfer may also be required to allow the correct seating of a countersink head screw or to provide the lead in for a second machining operation such as tapping. It can be used on medium hard materials and has the ability to be resharpened.

6 Pcs 3 Flute HSSM2 Countersink Set Part No.

Product Name

Shank Size

Barcode

INSTCS1

6 Pcs 3 Flute HSSM2 Countersink Set

5,6,7,8,10mm

9335319027679

INSTCS06

Size: 3 - 6.3 mm

5mm

9335319027655

INSTCS08

Size: 3 - 8.3 mm

6mm

9335319027662

INSTCS10

Size: 3 - 10.4 mm

6mm

9335319027686

INSTCS12

Size: 3 - 12.4 mm

8mm

9335319027693

INSTCS16

Size: 3 - 16.5 mm

10mm

9335319027709

INSTCS20

Size: 3 - 20.5 mm

10mm

9335319027716

13

www.navimportsaustralia.com.au

Insize SDS Drills SDS - Plus Rotary Hammer Drill Bits Insize SDS - Plus Rotary Hammer Drill Bits are manufactured using high quality industrial grade 40 chrome vanadium steel. They comply to DIN8035 standard. Ideal for use on natural and artifical stone, masonry, brickwork and re-enforced concrete.

SDS PLUS

SDS-plus Rotary Hammer Drill Bit Part No.

Size

Barcode

INSP10160

10 x 160mm

9335319026047

INSP10210

10 x 210mm

9335319026054

INSP12160

12 x 160mm

9335319026061

INSP12210

12 x 210mm

9335319026078

INSP14260

14 x 260mm

9335319026085

INSP16260

16 x 260mm

9335319026092

INSP18260

18 x 260mm

9335319026108

INSP20260

20 x 260mm

9335319026115

INSP5110

5 x 110mm

9335319026122

INSP5160

5 x 160mm

9335319026139

INSP55110

5.5 x 110mm

9335319026146

INSP6160

6 x 160mm

9335319026153 9335319026160

INSP65160

6.5 x 160mm

INSP65210

6.5 x 210mm

9335319026177

INSP8160

8 x 160mm

9335319026184

INSP8210

8 x 210mm

9335319026191

Features: • Blisteringly fast penetration • 30% faster than the average SDS plus drill bit • Quad cutting edge provides four carbide cutting surfaces • Double spiral flutes give a more efficient removal of drilled stock extending drill life • Brazed tip to ensure a perfect bond between tip and body

SDS - Max Rotary Hammer Drill Bits Insize SDS max rotary hammer drill bits are manufactured using high quality industrial grade 40 chrome vanadium steel. They comply to DIN8035 standard. Ideal for use on natural and artificial stone, masonry, brickwork and re-enforced concrete.

SDS MAX

SDS - Max Rotary Hammer Drill Bit Part No.

Size

Barcode

INSM16400

16 x 400mm

9335319027532

INSM16600

16 x 600mm

9335319027549

INSM18400

18 x 400mm

9335319027556

INSM18600

18 x 600mm

9335319027563

INSM20400

20 x 400mm

9335319027570

INSM20600

20 x 600mm

9335319027587

INSM22400

22 x 400mm

9335319027594

INSM22600

22 x 600mm

9335319027600

INSM25400

25 x 400mm

9335319027617 9335319027624

INSM25600

25 x 600mm

INSM28400

28 x 400mm

9335319027631

INSM28600

28 x 600mm

9335319027648

14

FEATURES • Blisteringly fast penetration • 30% faster than the average SDS max drill bit • Quad cutting edge provides four carbide cutting surfaces • Double spiral flutes give a more efficient removal of drilled stock extending drill life • Brazed tip to ensure a perfect bond between tip and body

www.navimportsaustralia.com.au

Insize Bench Drill and Pedestial Drill Presses

IN4120 Bench Drill Press 20mm Type

IN4120

Barcode: 9335319026283

Bench

Features

Motor

750W/1HP 240v-3.6Amp

Chuck Size

3-16mm B16

Drilling Capacity (max.)

20mm

Spindle Travel

82mm

Spindle Taper

2MT

Quill Diameter

47mm

Collar Diameter

55mm

Spindle Speed Steps

16

Spindle Speed Range

220-2840rpm

Swing

360mm

Working Table

290 x 290mm

Base Plate

460 x 280mm

Column Diameter

72mm

Emergency Stop NVR Safety Switch

Yes

Micro switch on Pulley Guard

Yes

Chuck Guard

Yes

Overall Height

990mm

Weight

57/53kg

Packing Dimension (Shipping)

820 × 500 × 290mm

• Heavy duty quality casting, main body 1 piece construction.

• Main column tube thick walled giving greater rigidity.

• Efficient and smooth V belt drive system with adjustable spindle speeds.

• Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds.

• Belt tensioning lever quick action type.

• Work table slotted in base to allow rigid mounting of work.

• Left and right tilt work table, rotation to 45% with gauge.

• Heavy duty rack and pinion work table height adjustment with locking lever.

• Industrial duty 3 piece drilling lever with depth stop.

• Safety drilling chuck guard, adjustable with flip up screen.

• No Voltage Release Safety Switch.

• Quality copper wound 240 volt fan cooled, aluminium finned electric motor.

• 16 Spindle Speed: 220, 310, 350, 470, 480, 500, 640, 680, 700, 750, 1270, 1370, 1520, 1910, 2040 & 2840 RPM Includes: • 16mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills

IN5120 Pedestal Drill Press 20mm Type

Barcode: 9335319026290

Pedestal

Features

Motor

750W/1HP 240v-3.6Amp

Chuck Size

3-16mm B16

Drilling Capacity (max.)

20mm

Spindle Travel

82mm

Spindle Taper

2MT

Quill Diameter

47mm

Collar Diameter

55mm

Spindle Speed Steps

16

Spindle Speed Range

220-2840rpm

Swing

360mm

Working Table

290 x 290mm

Base Plate

460 x 280mm

Column Diameter

72mm

Emergency Stop NVR Safety Switch

Yes

Micro switch on Pulley Guard

Yes

Chuck Guard

Yes

Overall Height

1580mm

Weight

65/61kg

Packing Dimension (Shipping)

1150 x 500 x 300mm

• Heavy duty quality casting, main body 1 piece construction.

• Main column tube thick walled giving greater rigidity.

• Efficient and smooth V belt drive system with adjustable spindle speeds.

• Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds.

• Belt tensioning lever quick action type.

• Work table slotted in base to allow rigid mounting of work.

• Left and right tilt work table, rotation to 45% with gauge.

• Heavy duty rack and pinion work table height adjustment with locking lever.

• Industrial duty 3 piece drilling lever with depth stop.

• Safety drilling chuck guard, adjustable with flip up screen.

• No Voltage Release Safety Switch.

• Quality copper wound 240 volt fan cooled, aluminium finned electric motor.

• 16 Spindle Speeds: 220,310,350,470,480, 500,640,680,700,750,1270,1370,1520,1910, 2040 & 2840 RPM Includes: • 16mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills

IN5120

15

www.navimportsaustralia.com.au

Bench Drill and Pedestial Drill Presses & Keyless Chucks IN5125 Pedestal Drill Press 25mm Type

IN5125

Pedestal

Motor

750W/1HP 240v-3.6Amp

Chuck Size

5-20mm B22

Drilling Capacity (max.)

25mm

Spindle Travel

82mm

Spindle Taper

3MT

Quill Diameter

47mm

Collar Diameter

65mm

Spindle Speed Steps

12

Spindle Speed Range

280-2380rpm

Swing

360mm

Working Table

290 x 290mm

Base Plate

460 x 280mm

Column Diameter

80mm

Emergency Stop NVR Safety Switch

Yes

Micro switch on Pulley Guard

Yes

Chuck Guard

Yes

Overall Height

1580mm

Weight

71/67kg

Packing Dimension (Shipping)

1150 x 500 x 300mm

IN5132 Pedestal Drill Press 32mm Type

IN5132

Pedestal

Motor

1100W/1.5HP240v-7Amp

Chuck Size

5-20mm B22

Drilling Capacity (max.)

32mm

Spindle Travel

120mm

Spindle Taper

4MT

Quill Diameter

62mm

Collar Diameter

75mm

Spindle Speed Steps

12

Spindle Speed Range

150-2450rpm

Swing

438mm

Working Table

470 x 420mm

Base Plate

580 x 430mm

Column Diameter

92mm

Emergency Stop NVR Safety Switch

Yes

Micro switch on Pulley Guard

Yes

Chuck Guard

Yes

Overall Height

1700mm

Weight

130/120kg

Packing Dimension (Shipping)

1430 x 660 x 330mm

Barcode: 9335319026306 Features • Heavy duty quality casting, main body 1 piece construction.

• Main column tube thick walled giving greater rigidity.

• Efficient and smooth V belt drive system with adjustable spindle speeds.

• Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds.

• Belt tensioning lever quick action type.

• Work table slotted in base to allow rigid mounting of work.

• Left and right tilt work table, rotation to 45% with gauge.

• Heavy duty rack and pinion work table height adjustment with locking lever.

• Industrial duty 1 piece cast-iron drilling lever with depth stop.

• Safety drilling chuck guard, adjustable with flip up screen.

• No Voltage Release Safety Switch.

• Quality copper wound 240 volt fan cooled, aluminium finned electric motor.

• 12 Spindle Speeds: 280,420,440,550,620, 660,1150,1180,1400,1550 ,1830 & 2380RPM Includes: • 20mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills

Barcode: 9335319026313 Features • Heavy duty quality casting, main body 1 piece construction.

• Main column tube thick walled giving greater rigidity.

• Efficient and smooth V belt drive system with adjustable spindle speeds.

• Micro safety switch fitted to pulley guard to ensure “non start “ when changing spindle speeds.

• Belt tensioning lever quick action type.

• Work table slotted in base to allow rigid mounting of work.

• Left and right tilt work table, rotation to 45% with gauge.

• Heavy duty rack and pinion work table height adjustment with locking lever.

• Industrial duty 1 piece cast-iron drilling lever with depth stop.

• Safety drilling chuck guard, adjustable with flip up screen.

• No Voltage Release Safety Switch.

• Quality copper wound 240 volt fan cooled, aluminium finned electric motor.

• 12 Spindle Speeds: 150, 240, 270, 330, 430, 470, 830, 1030, 1270, 1430, 1790 & 2450 RPM. Includes: • 20mm keyed drill chuck and arbor • Chuck key to suit • Drill drift tool to remove drill chuck or taper shank drills

Insize Precision Keyless Chucks are quality industrial grade precision manufactured to a true running accuracy of 0.05mm. Industrial knurled finish, self-tightening feature automatically increases gripping pressure proportionally to prevent tool shank slippage. Optimum quality low sheen finish.

Keyless Chucks

16

Part No.

Model

Capacity

Dimension

Barcode

INJO113

B16

1-13mm

44 x 94.5mm

9335319026528

INJO116

B18

1-16mm

51 x 112mm

9335319026535

www.navimportsaustralia.com.au

Chuck Arbors, Drill Sleeves & Insize Live Centres Insize Drill Chuck Arbors are made from quality industrial hardened steel. Ground finish for high precision and true running accuracy. Used to mount a drill chuck or any other tool which has a female tapered shank.

Insize Drill Chuck Arbors Part No.

Size

Capacity

Barcode

INMS2B16

MT2

B16

9335319026382

INMS2B18

MT2

B18

9335319026399

INMS2JT2

MT2

JT2

9335319026405

INMS2JT3

MT2

JT3

9335319026412

INMS2JT6

MT2

JT6

9335319026429

INMS3B16

MT3

B16

9335319026436

INMS3B18

MT3

B18

9335319026443

INMS3JT3

MT3

JT3

9335319026450

INMS3JT4

MT3

JT4

9335319026467

INMS3JT6

MT3

JT6

9335319026474

Insize Morse Taper Drill Sleeve are made from quality industrial grade hardened steel. Precision ground both internally and externally for true running accuracy. Permanent marking of size on the tang ensures accuracy and convenient use.

Insize Morse Taper Drill Sleeve Item No:

Size

Outside Taper

Inside Taper

Barcode

INR2x1

2MT x 1MT

2MT

1MT

9335319003703

INR3x2

3MT x 2MT

3MT

2MT

9335319003710

INR4x2

4MT x 2MT

4MT

2MT

9335319026368

INR4x3

4MT x 3MT

4MT

3MT

9335319026375

Insize Triple Bearing Precision Live Centre Triple Bearing Precision Live Centre Part No.

Taper

Length (mm)

Diameter (mm)

Maximum RPM

Barcode:

INMT2

MT2

132

40

4000

9335319026566

Features: • Quality industrial assembly with 3 preloaded, anti friction ball bearings to avoid starting loads.

• Suitable for middle and high speeds.

• Quality industrial grade alloy steel, heat treated shaft (HRC 60°+_2°).

• Precision ground for high quality and true running accuracy.

• Run out accuracy within .0002” (0.005mm).

• 60° middle centre angle.

Insize Medium Duty Live Centre Medium Duty Live Centre Item No:

Taper

Length (mm)

Diameter (mm)

Maximum RPM

Barcode:

GMT2

MT2

145

45

5000

9335319026702

Features: • Quality assembly with ball bearing and plain thrust bearing.

• Suitable for medium speed.

• Quality industrial grade alloy steel, heat treated shaft (HRC 60°+_2°).

• Precision ground for high quality and true running accuracy.

• Run out accuracy within 0.01mm.

• 60° middle centre angle.

17

www.navimportsaustralia.com.au

Pittsburg Fans Pittsburgh Fans are manufactured to industrial quality standards with copper wound electric motors and heavy duty hardware. They are effective for removal of waste gas odourised air, air circulation and ventilation in confined spaces as well as equipment cooling.

750mm Industrial Pedestal Fan Part No.

Specifications:

PFS-75

• 240V/10amp/280watt copper wound motor, 1350rpm • Adjustable height (min/max) 1560-1900mm.

• 750mm Blade Diameter.

• 290 cub m/min air flow.

• 3-speed control.

• Fixed or Oscillates to 90º • Strong Powder coated safety guard.

• Heavy-duty rubber filled non slip four leg base.

Barcode

9335319026269

450mm Floor & Desk Fan Part No.

Specifications:

PFE-45

• 240V/10amp/165watt copper wound motor, 1350rpm.

• 450mm Blade Diameter.

• 124 cub m/min air flow.

• 3-speed button type control.

• Chrome safety guard.

Barcode

9335319026252

750mm Industrial Wall Mount Fan Part No.

Specifications:

PFB-75

• 240V/10amp /280watt copper wound motor, 1350rpm.

• 750mm Blade Diameter.

• 290 cub m/min air flow.

• 3-speed control.

• Fixed or Oscillates to 90º.

• Strong Powder coated safety guard.

Barcode

9335319026245

Portable Blower Fans Part No.

Specifications:

Barcode

PVF300

• Heavy Duty Industrial grade, low noise 240V/10AMP/50HZ/550 Watt high efficiency copper wound • electric motor. Air Flow • 65cum./min @2800rpm. Single speed Push Button switching.

9335319026207

PVF400

• Heavy Duty Industrial grade, low noise 240V/10AMP/50HZ/1100Watt high efficiency copper wound • electric motor. Air Flow • 128cum./min @2800rpm. Single speed Push Button switching.

9335319026214

Adjustable and Moveable Ventilation Blower Fan Part No.

Specifications:

PVF500

• 2 HP/1500 watt, 240Volt, • 50Hz, motor • Single Speed: 2800rpm • 160 M3/Min Air Flow 500mm (20”) Metal Blower; Weight: 41kg

PVF600

18

• 3 HP/2250 watt, 240Volt, • 50Hz, motor • Single Speed: 1600rpm • 320 M3/Min Air Flow 600mm (24”) • Metal Blower; Weight: 78kg

Ducting Hose Barcode

9335319026641

9335319026658

Part No.

Specifications:

PBR1012

300mm Diameter x 10M Flexible ducting Hose

Barcode 9335319026221

PBR1016

400mm Diameter x 10M Flexible ducting Hose

9335319026238

PBR1020

500mm Diameter x 10M Flexible ducting Hose

9335319026665

PBR1024

600mm Diameter x 10M Flexible ducting Hose

9335319026672

www.navimportsaustralia.com.au

Metaltech Metal Working Machines Metaltech Metal Machines are industrial grade multifunction sheet metal working machines that have the versatility to handle 3 separate functions. They can bend, roll and shear sheet metal via their unique single handle operation.

The ideal workmate for the professional engineer's workshop or serious home handyman alike.

3 in 1 Shear, Brake & Roll Sheet Metal Working Machines Part No.

Specifications:

MTBRS305

• Maximum material thickness, 1.0mm (sheet metal), 1.5mm (aluminium) • Maximum length: 305mm • Roller diameter: 38mm • Minimum roll diameter: 38mm ID • Overall dimensions: (L x W x H) • 540 × 280 × 370 mm • Weight(nett): 45kg

MTBRS760

• Maximum material thickness 1.00mm (sheet metal), 1.5 mm (aluminium) • Maximum length: 760mm • Roller diameter: 38mm • Minimum roll diameter: 38mm ID • Overall dimensions: (L x W x H) • 1020 x 480 x 690 mm • Weight (nett): 135kg

MTBRS1016

• Maximum material thickness 1.0mm (sheet metal), 1.5mm (aluminium) • Maximum length: 1016mm • Roller diameter: 43mm • Minimum roll diameter: 43mm ID • Overall dimensions: (L x W x H) • 1280 × 600 × 750 mm • Weight (nett): 245kg

1320mm Sheet Metal Foot Shear Part No.

MTFS1320

Features:

Specifications:

Sturdy cast iron frame with truss bars for added stability.

Ideal for precise shearing of mild steel up to 16 gauge, as well as plastic, zinc, aluminum, brass, copper and lead.

Shear bed is precision ground for an accurate working surface.

Double locking back-gauges have embossed scales and wheels for fine adjustments.

Safety features include positive pedal stops and transparent finger guards.

Precision tool steel blades.

Includes table gauges and front mounted extension arms for holding larger pieces of material.

• Cutting length: 1320mm/52” • Capacity (mild steel): • 1.5mm/16 gauge • Back gauge range: 904mm/35” • Front gauge range: 320mm/12 ½” • Overall dimensions: 1670(L)x820(W)x1190(H)mm

• Net Weight: 430kg/480kg • Packing size: 1660x755x1165mm

Metaltech Type Pan Brake is large, quality pan brake. It has compression spring for top beam counterbalance, cam lock and rebound spring for bending beam counterbalance. Bow handle is also present for bending beam rotation.

Metaltech Type Pan Brake Part No. MTPB1270E

Specifications: • Bending Length: 1260mm • Folding Thickness For Mild Steel: 2mm • Max Folding Angle: 138 degree • Dimensions: 1600x950x1200mm

19

www.navimportsaustralia.com.au

Metaltech Metal Working Machines Metaltech Deluxe Bench Top Pan is large, robust, industrial quality pan brake for manual bending of mild steel sheet metal. It has 16 removable individual forming fingers for bending of pans or boxes. Precision machine finished bending bed and material thickness is compensated by adjustable clamp blade.

METALTECH

Metaltech Deluxe Bench Top Pan Brake Part No.

MTPB1220

Specifications: • 16 removable forming fingers, widths: • 5 × 51mm, 6 x 76mm and 5 x 101mm • Maximum bending thickness capacity: mild steel 1.2mm • Maximum material length capacity: 1220mm • Overall dimensions: (L x W x H) 1520 × 320 × 530 mm • Weight (nett): 175kg

Metaltech Bench Top Pan Brake for bending of mild steel sheet metal. Multiple forming finger widths for bending pans or boxes. Precision machine, finished bending bed and material thickness is compensated by adjustable clamp blade.

METALTECH

Metaltech Bench Top Manual Pan Brake Part No.

MTPB610

Specifications: • Multiple forming finger widths: (26, 51, 76,203 and 254mm) • Maximum bending thickness capacity: mild steel 1.0mm • Maximum material length capacity: 600mm • Overall dimensions: (L x W x H) 800 × 270 × 365mm • Weight (nett): 44kg

Manual Pan and Box Folder has fully welded plate construction with heavy duty counterweights and cavity. This allows trouble free forming with a fast, smooth and easy operation via spring loaded handles. The bending blade is hardened and precision ground.

Manual Pan and Box Folder 1295mm Part No.

MTPB1295

Specifications: • Capacity: 2.5mm/12 gauge • Bending Length: 1295mm • Maximum Lift of Beam: 32mm • Beam Adjustment: 25mm • Bending Angle: 0 to 135 Degree • Finger Sizes: 3, 4, 5 and 20"

METALTECH Metaltech 300mm sheet Metal Vice Held Press Brake Type Folder easily folds metal up to 1.6mm or shorter lengths up to 2.5mm. Great little versatile tool for those small jobs. Conveniently clamps into any bench vice for a quick use.

Barcode: 9335319006674

300mm Metaltech Manual Sheet Metal Folder Part No.

81140

METALTECH

20

Specifications: • 300mm Max Width • 4 removable segment fingers: 25mm, 50mm, 75mm and 150mm • Quality Made Product • Maximum Sheet Thickness 1.6mm (will fold up to 2.5mm in short widths)

www.navimportsaustralia.com.au

Manual Sheet Metal Slip Rolls Metaltech 300mm Manual Sheet Metal Roller is a leader in its class. It can easily roll mild steel sheets up to 1.6mm in thickness. The unit conveniently clamps into any bench vice giving absolute versatility. The top roller is able to be adjusted to different heights. It can also be removed for different types of tasks. Two of the rollers feature five different sizes of wire grooves.

Barcode: 9335319006681

Metaltech 300mm Manual Sheet Metal Roller Part No.

81150

Specifications: • 300mm Roller Length • 30mm Roller Diameter • Lift out roller • Quality Made Product • Brass Roller Bushes • Maximum Sheet Thickness 1.6mm • (will roll up to 2.5mm in short widths) • Maximum Rod Thickness 5mm • Can be used with any type of pliable metal (eg.Stainless Steel, Mild Steel, Aluminium, Copper Etc.)

Heavy cast iron construction with front mounted handle for easy placement and release of work. Precision turned tool steel rolls with wire grooves are ground and polished to offer accuracy and stability. Hardened steel gearing. Large roll adjusting screws facilitate lifting the upper roll for easy removal of material.

METALTECH

610mm Manual Sheet Metal Slip Roll Part No. MTSP610

METALTECH

Specifications: Max Length: 610mm/24”. Capacity(mild steel): 1mm/20 gauge Roller diameter: 38mm/1-1/2”.

Rod/Wire Grooves diameter: 3/16", 1/4", & 5/16" Shipping Dimensions: 950(L)x270(W)x380(H)mm. Weight: 37kg

1050mm Manual Sheet Metal Slip Roll Part No.

MTSP1050

Specifications: Max Length: 1050mm/40”. Capacity(mild steel): 1mm/20 gauge Roller diameter: 50mm/2”.

Rod/Wire Grooves diameter: 3/16", 1/4", & 5/16" Shipping Dimensions:1480(L)x350(W)x500(H)mm. Weight: 86kg

1270mm Manual Sheet Metal Slip Roll Part No.

MTSP1270

Features:

Specifications:

Heavy cast iron construction with front mounted handle for easy placement and release of work piece.

Precision-turned tool steel rolls with wire grooves are ground and polished to offer accuracy and stability.

Hardened steel gearing.

Large roll adjusting screws facilitate lifting the upper roll for easy removal of material.

• Maximum length: 1270mm/50” • Capacity(mild steel): 1.5mm/16 gauge • Diameter of Rolls: 75mm • Minimum forming radius: 38mm/1 ½” • Dimensions: • 1830(L)x355(W)x406(H)mm • Net Weight: 230kg/251kg • Packing size: 1750 x 430 x 565mm

METALTECH

21

www.navimportsaustralia.com.au

Metaltech Metal Working Machines Manual Shearing Machine is used for manual mechanical cutting of metals and other materials like Aluminium, Brass, Copper, Lead, Mild Steel, plastic and Zinc.

Barcode: 9335319006698

Metaltech Manual Shearing Machine 150mm

METALTECH

Part No.

81200

Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety.

High quality chrome carbon steel blade (150mm /6”).

Adjustable material thickness clamp.

Long rubberized handle for maximum leverage.

Satin hammer tone finish for corrosion resistance.

Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 8mm Cutting length with 1.2mm thickness 140mm

Barcode: 9335319006704

Metaltech Manual Shearing Machine 200mm Part No.

81210

Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety.

High quality chrome carbon steel blade(200mm/8”).

Adjustable material thickness clamp.

Long rubberized handle for maximum leverage.

Satin hammer tone finish for corrosion resistance.

Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 10mm Cutting length with 1.2mm thickness 165mm

Barcode: 9335319006711

Metaltech Manual Shearing Machine 300mm Part No.

81220

Features: Heavy duty steel fabricated construction with 4 mounting holes for stability and safety.

High quality chrome carbon steel blade(300mm /12”) Adjustable material thickness clamp.

Long rubberized handle for maximum leverage.

Satin hammer tone finish for corrosion resistance.

Specifications: WORKING CUTTING CAPACITY: Plate soft mild steel 70 x 6mm Round soft mild steel 10mm Cutting length with 1.2mm thickness 265mm

Metaltech bending brake bends materials up to 17 gauge steel (1.4mm) and makes up to 90 degree bends.

Ability to bend up to 750mm wide. Bending brake allows the user to make adjustments quickly using a protractor.

METALTECH

Barcode: 9335319009583

Metaltech Bending Brake 750mm Specifications:

81120

22

Bend materials up to 17 gauge steel (1.4mm) and makes up to 90 degree bends.

Bends material up to 750mm wide.

Designed for bench top mounting using 4 each 3/8" diameter bolts.

Make adjustments quickly using a protractor.

Packing Size: 930 x 190 x 80mm

www.navimportsaustralia.com.au

Metaltech Metal Working Machines Convenient, bench top universal steel benders sre designed for accurate hot and cold bending and shaping of various metal stock. Simply mount on a sturdy bench via the 4 mounting holes and you are ready to be creative. Ideal for flat, round, square or angled steel the “Metaltech" universal steel bender is an essential piece of equipment for the professional fabrication shop, farm workshop, or serious home handyman.

Metaltech Bench Top Universal Steel Bender Part No.

MTUB-100

Specifications: Precise bending range from 0 to 120° Flat steel: 100 x 5mm (cold); 100 × 10 mm (warm) Round steel: 18 mm (cold); 20 mm (warm) Square steel: 16 x 16 mm (cold); 20 × 20 mm (warm) Angle steel: 60 x 8 mm (cold, only with pre-notch); 100 × 10 mm (warm, only with pre-notch) Weight(nett): 32kg

METALTECH

Industrial Bench Top Universal Steel Bender Part No.

MTUB-100A

Specifications: Precise bending range from 0 to 120° Flat steel: 100 x 7 mm (cold ); 100 × 12 mm (warm) Round steel: 20 mm (cold ); 22 mm (warm) Square steel: 20 x 20 mm (cold); 22 × 22 mm (warm) Angle steel: 75 × 8 mm (cold, only with pre-notch); 100 × 12mm (warm, only with pre-notch) Weight(nett): 36 kg

METALTECH

Manual Tube Bender bending kit has everything that you need to make smooth bends. Simply mount the cast iron base onto your bench top or clamp it into a vice, and you are ready to bend 3/8, 1/2, 5/8, 9/16, 3/4, or 7/8 inch round, and 3/4 or 1 inch square tubing. This bending kit includes the base, extension handle, dies and a storage case.

Manual Tube Bender - Round & Square Part No.

Specifications:

MTTB22

Suitable for 1.2mm wall thickness in mild steel Includes round formers 3/8",1/2",9/16",5/8",3/4",7/8" Includes square formers 3/4" & 1"

METALTECH

23

www.navimportsaustralia.com.au

Metaltech Metal Working Machines All Industrial Duty Swivel Head Metal Cutting Band Saws have a heavy duty 240v/50hz 1100 watt highly efficient copper wound electric motor with long service life. Equipped with a no voltage release safety switch quality cast iron frame and bed, built in cooling system, ball bearing blade guides and 3 speed belt adjustment helps cut a wide range of materials. Hydraulic cylinder for automatic feed is fully adjustable with a automatic Shut Off switch.

Barcode: 9335319029994

Metal Cutting Band Saw - 370 Watt Product No. MTBS115

METALTECH

• Motor - 240v/370watt.

• Automatic electric cut of switch.

• Adjustable length stop for repetition job.

• Table working height • 3 Speed pulley drive: 20, 30, 50 meter per min.

• Max cutting cap: @90 degrees, round 110mm, rectangular 100X150mm • Max cutting cap: @45 degrees, round 100mm, rectangular 85X65mm • Blade size: L1640mm • Blade teeth: 10-14 TPI • Blade thickness: 0.65mm • Blade width: 13mm • Saw arch tilting range: 0-45 degree • Packing size: 965X410X500mm

Barcode: 9335319006261

Metal Cutting Band Saw - 750 Watt Product No. MTBS181 • Motor - 750watt • Blade Speed: 34, 41, 59 & 98 meter per min • Max cutting cap: round 180mm, square 180X305mm • Blade size: L2360mm, • Blade size teeth: 4-6 TPI • Blade size thickness: 0.9mm • Blade size width: 19mm • Saw arch tilting range: 0-45 degrees • Packing size: 1250X440X1080mm

METALTECH

Barcode: 9335319026320

Industrial Duty Swivel Head Metal 205 X 215mm Product No. MTBS8S Specifications:

METALTECH 24

Motor

240V / 50HZ 1100watt

Blade Size

2360mm x 20mm x 0.9mm

Blade Speeds

24, 41, 61, 82m/Min

Bow Swivel

-45º - +45º

Cutting Capacity at 0º Round Stock

205mm

Cutting Capacity at 0º Square Stock

205 x 215mm

Cutting Capacity at 45º round stock

135mm

Cutting Capacity at 45º Square Stock

205 x 115mm

Weight Net/Gross

165/200kgs

Packing Size

1230 x 650 x 820

www.navimportsaustralia.com.au

Metaltech Metal Working Machines Metaltech Heavy Duty Roller Stands are often used with bandsaws, cold saws and general workshop goods handling.

Metaltech Heavy Duty Roller Stand Part No.

MTRSF52

Metaltech Heavy Duty Roller Stand

Specifications:

Barcode:

• (1*)Maximum static load capacity: 500kg • (2*)Maximum working load capacity: 360kg • Packaged dimensions: 515(L)x515(W)x95(H)mm • Weight(net): 16kg

9335319026337

(1*)Maximum static load capacity is the maximum load that can be held in a fixed static position. This is also determined by the locking or mounting position of the stand.

(2*)Working load capacity refers to: maximum load that can be held whilst mooving on the roller/s.

Part No.

MTRSV52

Specifications:

Barcode:

• (1*)Maximum static load capacity: 500kg • (2*)Maximum working load capacity: 360kg • Height adjustment: 580-970mm • Packaged dimensions: 515(L)x515(W)x95(H)mm • Weight(net): 17kg

9335319026559

(1*)Maximum static load capacity is the maximum load that can be held in a fixed static position. This is also determined by the locking position of the stand.

(2*)Working load capacity refers to: maximum load that can be held whilst moving on the roller/s.

Metaltech Heavy Duty Roller Stands are often used with bandsaws, cold saws and general workshop goods handling.

Metaltech Heavy Duty Roller Stand (2 meter) Part No.

MTRST607

Specifications: • Capacity 800kg • Height adjustment 580-1030mm.

• Bearing rollers 60mm.

• Easy leveling adjustment facility on feet

Metaltech Heavy Duty Roller Stand (1 meter) Barcode:

9335319026351

Part No.

MTRST604

Specifications: • • • •

Capacity 800kgs.

Height adjustment 580-1030mm.

Bearing rollers 60mm.

Easy leveling adjustment facility on feet.

Barcode:

9335319026559

25

www.navimportsaustralia.com.au

Metaltech ARC/TIG Welding Machines Metaltech ARC/TIG Welding Machines are suitable for high quality ARC/TIG welds on materials like Steel, Stainless Steel, Copper and Bronze. These machines are packed with features that make them suitable for light industrial, site repair and maintenance applications and come with all the accessories needed for the job.

Barcode: 9335319007749

ACCESSORIES INCLUDED:

• 300A Earth Lead & Arc Lead x 2.8M • Cable, length: 2.8M • Quick connector plug: 10-25, 2pcs • Mask & Brush • Operations Manual

N11093

MTVO140 - Metaltech140 Digital Inverter Welder FEATURES:

SPECIFICATIONS:

• Latest IGBT inverter technology.

• 140A MMA (stick electrode) • Hot start (improves electrode starting) • Excellent arc stability with all electrodes • DC Scratch TIG - Scratch Arc Ignition • Thermal overload protection • IP21S rating for environmental/safety protection • Generator compatible (recommend 6.5 KVA minimum) • Fitted with and approved to use domestic 10 Amp plug • 1 year limited warranty

Input Voltage: 240V 50HZ (+-15%) 10 Amp plug Rated Input Power: 4.1kW ieff Amps: 10A Rated Output: 140A/25.6V Welding Current Range: 10-140A No Load Voltage: 78 Duty Cycle: 40ºC - MMA 15% @ 140 Amps Dimensions: 295 x 135 x 270mm Weight(nett): 4Kg Approved to Australian Standard MTVO140

ACCESSORIES INCLUDED: • 300A Earth Lead & Arc Lead set x 2.8M • Cable, length: 2.8M • Quick connector plug: 10-25, 2pcs • Mask & Brush • Operations Manual

N11093

Barcode: 9335319007930

MTVO180 - Metaltech180 Digital Inverter Welder FEATURES:

SPECIFICATIONS:

• Latest IGBT inverter technology.

• 180A MMA (stick electrode) • Hot start (improves electrode starting) • Excellent arc stability with all electrodes • DC Scratch TIG - Scratch Arc Ignition • Thermal overload protection • IP21S rating for environmental/safety protection • Generator compatible (recommend 6.5 KVA minimum) • Fitted with and approved to use domestic 15 Amp plug • 1 year limited warranty

Input Voltage 240V 50HZ (+-15%) 15 Amp plug Rated Input Power 6.2kW ieff AMPS: 13.1A Rated Output: 180A/27.2V Current Range: 10-180A No Load Voltage: 78 Duty Cycle 40ºC - MMA 15% @ 180 Amps Dimensions: 295 x 135 x 270mm Weight(nett): 4.2Kg Approved to Australian Standard MTVO180

MTPLASCUT40 Metaltech 40 Inverter Plasma Cutter The Metaltech plasma cutter efficiently cuts any electrically conductive material like steel, aluminium, stainless steel, copper or brass up to a thickness of 12mm. For use in fabrication, automotive repair, industrial construction and scrapping applications.

ACCESSORIES:

• High-quality Plasma Torch and Cable: 4M • Earth Clamp and Cable: 3M • Air Regulator and Fitting

N11093

MTPLASCUT40 - Metaltech40 Inverter Plasma Cutter FEATURES:

SPECIFICATIONS:

• Latest Inverter Technology • Light industrial application • Strong metal housing • Tolerant to variable power supply • Suitable to cut all electrically conductive materials • HF Contact Arc Start • Tip can be contacted and dragged on cutting material • Light weight compact and portable • 1 year limited warranty

Input Voltage: 240V 50HZ (+-15%) 10 Amp plug Current Range: 15-35 Amp Duty Cycle (40°C, 10min): 30% @ 35A Rated input current: 21A Input Capacity: 5kW Max Load Voltage: 250V Max Cutting Thickness(mm): 10 Clean/12 Severance Dimensions: 460 x160 x 320mm Weight: 11.6Kg Approved to Australian Standard

SAFETY PRECAUTIONS:

PROPER EYE PROTECTION, LEATHER GLOVES, APRON AND JACKET ARE RECOMMENDED TO PREVENT BURNS FROM SPARKS OR DEBRIS.

26

MTPLASCUT40

www.navimportsaustralia.com.au

Metaltech Mig Welding Machines Metaltech Mig Welding Machines are suitable for high quality Mig welds on materials like Steel, Stainless Steel, Copper and Bronze. The burnback adjustment leaves the wire ready for the next weld. These machines come with all welding accessories necessary for the job and are suitable for light fabrication, maintenance and repairs.

ACCESSORIES INCLUDED: • Operations Manual • Euro Torch Connector and 300A earth clamp lead; 3M • Copper cable length: 3M • Gas Hose 2M • 450g Gasless Wire • 500g Solid Wire • Solid Wire V Roller • Knurled Roller Flux Core • Handle & Handle-cap • 2 Handle Screws • 2 Gas Hose clamps • Contact Tips (0.6, 0.8, 0.9)

N11093

Barcode: 9335319007725

- Metaltech140 Gas/Gasless MIG FEATURES:

SPECIFICATIONS:

• 120 Amp Gas or Gasless MIG(GMAW) • Euro Torch Connector • Spool Gun Ready - Suits 1 and 5kg spools • Connector Earth Lead(3 Metre) • Thermal Overload Protection • Six Step Output Control • Fan Cooling • MIG Torch with curved neck and hanging hook • 1 Year Limited Warranty • Variable Wire Speed Control

Input Voltage 240V 50HZ (+-15%) 10 Amp plug Max input effective Amps: 24A(+/-2A) Rated Input Power: 7.5kW Duty Cycle @ 40°C MIG: 10% @ 120A(+/-5%) Output Current Range: MIG: 35-120 Amps 6 Steps ieff MIG: 7.9A(+/-2.5A) Power factor: 0.67 Protection Class: IP21S Insulation Class: H MIG Wire Diameter Range: 0.6-0.8mm solid wire 0.6-0.9mm flux core wire For use with generators: Yes Dimensions: 485 x 205 x 320mm Weight(nett): 28Kg Approved to Australian Standard

MTMIG140

ACCESSORIES INCLUDED: • Operations Manual • Euro Torch Connector and 300A earth clamp lead; 3M • Copper cable length: 3M • Gas Hose 2M • 450g Gasless Wire • 500g Solid Wire • Solid Wire V Roller • Knurled Roller Flux Core • Handle & Handle-cap • 2 Handle Screws • 2 Gas Hose clamps • Contact Tips (0.6, 0.8, 0.9)

N11093

Barcode: 9335319007756

MTMIG180 - Metaltech180 Gas/Gasless MIG FEATURES:

SPECIFICATIONS:

• 180 Amp Gas or Gasless MIG(GMAW) • Euro Torch Connector • Spool Gun Ready - Suits 1 and 5kg spools • Connector Earth Lead (3 Metre) • Thermal Overload Protection • Six Step Output Control • Fan Cooling • MIG Torch with curved neck and hanging hook • 1 Year Limited Warranty • Variable Wire Speed Control

Input Voltage: 240V 50HZ (+-15%) 15 Amp plug Max input effective Amps: 38A(+/-2A) Rated Input Power: 7.5kw Duty Cycle @ 40°C (AS/NZ60974) MIG:10% @ 180A(+/-5%) Output Current Range MIG: 40-180 Amps 6 Steps ieff MIG: 12.5A ieff Max. MIG: 38A Power factor: 0.67 Protection Class: IP21S Insulation Class: H MIG Wire Diameter Range: 0.6-0.9mm solid wire 0.6-0.9mm flux core wire Thermal Overload Protected: Yes For use with generators: Yes Dimensions: 485 x 205 x 320mm Weight(nett): 32Kg Approved to Australian Standard

MTMIG180

27

www.navimportsaustralia.com.au

Metaltech Welding Accessories Metaltech Welding Accessories

METALTECH

Arrow Magnetic Welding Holder Small Part No.

Specifications:

Strong, powerful magnet encased in durable steel.Excellent for holding pipe and metal in an up right position. Used for welding, soldering, and assembly.

Barcodes 85080

Capacity - 25 lbs (11.25kg)

9335319006971

85100

Capacity - 50 lbs (22.5kg)

9335319006988

85120

Capacity - 75 lbs (33.75kg)

93353119004601

Magnetic Ground Block Part No. 85245

Specifications: Quickly grounds arc welders when welding ferrous metals.

Magnet grounds to surface to clamp.

Size: 100mm diameter

Barcode 9335319004632

Mig Welding Pliers Part No.

85240

Specifications: Drop forged carbon steel. Spring loaded for easy operation.

Use as a wire cutter for trimming mig wire or use the small and large holes to hold mig tips.

Comfortable handle for extra gripping power.

Size: 9� / 225mm

Barcode

9335319004625

Mig Welding Pliers Part No.

85238

Specifications: Manufactured from drop-forged heat treated steel Long, flat jaws ideal for holding and manipulating hot work pieces Ergonomic, double dipped cushion grip handles Overall length: 200mm (8") Jaw width: 87.5mm (3.5") Weight(nett): 400g

Barcode

9335319006179

Welders Chipping Hammer Part No.

85171

Specifications: Manufactured from drop-forged heat treated steel with heavy duty, spring loaded, ergonomic handle to reduce vibration when striking and cleaning up welding jobs.

Hardened double ended head with both chisel and point.

Weight(nett): 365g

Barcode

9335319020618

Barcode: 9335319004175

Deluxe Welding Cart Part No.

85167

28

Specifications: Top Tray - 450mm (L) x 290mm (W) Middle Tray - 380mm (L) x 290mm (W) Bottom Tray - 450mm (L) x 290mm (W) Back bottom Tray - 250mm (L) x 290 (W) Overall height - 700mm Capacity: 100lb / 45 kg

www.navimportsaustralia.com.au

Metaltech Industrial Bench Grinders and Disc Sander Metaltech Industrial Bench Grinders are manufactured from the highest quality, heavy duty components. This ensures reliability, dependability and a long life under all applications.

N11093

Barcode: 9335319029048

MTBG625L Metaltech 150mm Industrial Bench Grinder FEATURES: • 240 volt/50hz, 450 watt copper wound induction motor with 10Amp plug • No voltage release magnetic safety switch • Industrial grade, adjustable protective eye shields included • Cast aluminium, fully adjustable tool rests, 1 with sharpening angle guide plate • Built in 12 volt, 10 watt work light • Built in coolant tray • Wheel dressing tool included • Pre-loaded, sealed bearings(no end play) for superior accuracy

Specifications: • No load speed: 2850 rpm • Grinding wheel size and grit: 150 x 25 mm (1) coarse #36 grit, (1) medium #60 • Shaft diameter(grinding wheel bore): 12.7mm (1/2") • Wheel locking nut thread size: M12 x 1.75 pitch • Weight(nett): 11.5kg

Barcode: 9335319006247

N11093

MTBG825L METALTECH 200MM INDUSTRIAL BENCH GRINDER Features: • 240 volt/50hz, 750 watt copper wound induction motor with 10Amp plug • No voltage release magnetic safety switch • Industrial grade, adjustable protective eye shields included • Cast aluminium, fully adjustable tool rests, 1 with sharpening angle guide plate • Built in 12 volt, 10 watt work light • Built in coolant tray • Wheel dressing tool included • Pre-loaded, sealed bearings(no end play) for superior accuracy

Specifications: • No load speed: 2850 rpm • Grinding wheel size and grit: 200 x 25mm (1) coarse #36 grit and medium #60 grit • Shaft diameter(grinding wheel bore): 16mm (5/8") • Wheel locking nut thread size: M16 x 2.0 • Weight(nett): 19kg

The Metaltech Industrial Disc Sanders are manufactured from the highest quality, heavy duty components.

This ensures reliability, dependability and long life under all applications.

N11093

Barcode: 9335319006322

MTDS300 Metaltech 300mm Industrial Disc Sander Features: • 240 volt/50hz 900 watt induction motor with direct drive and 10Amp plug • Table mounted 120° mitre guide included • Adjustable table with 90° quick set design • Strong iron motor base with 52mm dust port for connection direct to a workshop dust extractor(not included) • 435 x 210mm aluminium side work table tilts from 0 to 45 ° • Manual brake quick disc stop after power off

Specifications: • No load speed: 2850 rpm • Disc size: 305mm • Weight(nett): 30kg

29

www.navimportsaustralia.com.au

The Metaltech Industrial Belt, Disc Sander & Wet Sharpener The Metaltech Industrial Belt and Disc Sander is designed for bench top application. Manufactured from the highest quality industrial components for use by the professional or serious handyman.

N11093

Barcode: 9335319029055

MTBDS46 Metaltech Industrial Belt And Disc Sander Features: • 240 volt/50hz copper wound 550 watt continuous load electric motor with 10 Amp plug • Strong cast iron base • Belt table can be used both vertically and horizontally • Quick belt replacement mechanism with easy belt tracking control • Aluminium work table tilt 0 - 45°, sanding belt table 0- 90°

Specifications: • No load speed: 2850 rpm • Sanding disc size: 150mm • Sanding belt size: 100 x 914mm • Belt speed: 7.3 Meters/per sec • Weight(nett): 19.5

To achieve a professional sharpening result and maintain a long lasting sharpened edge the wet sharpening process is essential. The need to maintain the temper of the steel can only be made possible during the process of sharpening the blade if it is not overheated. The Metaltech professional wet sander is the answer to solve this problem as it maintains the temperature of the steel, at a uniform rate, thereby retaining the steel temper. T his results in not only a more professional sharpening job, but a longer lasting one as well.

N11093

Barcode: 9335319028843

MTWS250 250mm Metaltech Professional Wet Sharpener Features: • Unique 240 volt/50hz 180 watt copper wound, twin direction running electric motor • K220 grit aluminium oxide grindstone • Leather honing wheel for the professional finish and to maintain longevity • Built in cooling water reservoir • Universal tool support and angle guide included

Specifications: • Overall dimensions: 395 x 375 x 370mm • No load speed: 95 rpm(twin direction) • Grinding stone size: 250 x 50 x 12mm • Leather honing wheel size: 200 x 30 x 12mm • Weight(nett): 17.5kg

An ideal accessory for your bench grinder. For the safe and practical mounting of bench grinders not only to free up bench space, but to create a safe, neat and self-contained grinding section in the workshop.

MTBGS910 Metaltech Delux Bench Grinder Stand Features: • Ultra-strong cast iron base, fully floor mountable • Suits both 150mm and 200mm bench grinders • 315 x 250 mm metal table with elongated mounting holes suits most brands of grinders • Adjustable working heights from 710 - 910mm • Handy spare grinding wheel holders • Coolant and parts tray

Specifications: • Overall dimensions: 278 x 245 x 740mm • Table dimensions: 315 x 250mm • Mounting hole centres: 190 to 325mm • Weight(nett): 10.5kg

30

www.navimportsaustralia.com.au

Industrial & Vertical Sandblasting Cabinets Barcode: 9335319003772

Industrial Sandblaster Cabinet Part No.

Features & Specifications: Bench top design sandblasting cabinet for general blasting of materials when space is limited and still no mess is required.

Features: • Pistol- grip blasting gun with interchangeable ceramic nozzles • Powder coated steel construction, rugged and portable • Single acrylic windowed door/lid hinged with metal brace • Fluorescent lighting system

15100

Specifications: • Approximate inside cabinet size (LxWxH)590x500x300-360mm • Floor space with door/lid open (LxWxH)700x500x930mm • Minimum free air delivery required 254L/min @100 PSI at the machine entry point.

• Vacuum extraction and filter system recommended but not included • Weight(nett): 19KG

Barcode: 9335319006803

Vertical Sandblasting Cabinet Part No.

Features & Specifications: Freestanding sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.

15115

Features: • Pistol- grip blasting gun with interchangeable ceramic nozzles • Transparent viewing screen with replaceable film, gloves and gun • Single hinged side door with safety interlock for easy access • Powder coated steel construction • Fluorescent lighting system Specifications: • Approximate inside cabinet size: (LxWxH) 835x 510x 360-550mm • Floor space with door open: (LxWxH) 1430x 580x 1400mm • Minimum free air delivery required: 340l/ min @100 PSI at the machine entry point • Vacuum extraction and filter system recommended but not included • Weight(nett): 50kg

Barcode: 9335319007312

Industrial Sandblaster Cabinet Part No.

15350

Features & Specifications: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Tempered glass viewing screen with replacement shields, gloves and gun • Two hinged side doors with safety interlocks for easy access • Underbelly hopper stores and recirculates blast media • LED control panel • Powder coated steel construction • Built in vacuum and filter system • Fluorescent lighting system • Includes air regulator • Approximate inside cabinet size: (LxWxH) 940x600x340-580mm(with doors closed) • Floor space with doors open (LxWxH) 2070x970x1650mm • Minimum free air delivery required 340L/ min @100 PSI at the machine entry point • Weight(nett): 105kg

31

www.navimportsaustralia.com.au

Industrial Sandblasting Cabinet Barcode: 9335319007329

Industrial Sandblaster Cabinet Part No.

Features & Specifications: Freestanding industrial style sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.

15420

Features: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot valve assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/ lid with gas struts, two safety locks and two side doors • Built in vacuum and filter system • Includes air regulator • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media Specifications: • Approximate inside cabinet size: (LxWxH) 1200x 600x 340- 570mm with doors/lid closed • Floor space with doors/ lid open: • (LxWxH) 2340x 950x 1650mm • Minimum free air delivery required: 680L/min @100 PSI at the machine entry point • Weight(nett): 165kg

Barcode: 9335319009668

Industrial Sandblasting Cabinet Part No.

Features & Specifications: Freestanding sandblasting cabinet for general blasting of materials in the enclosed cabinet with no mess.

15990

Features: • Industrial quality pistol- grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot value assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/lid with gas struts and two safety locks • Built in vacuum and filter system • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media Specifications: • Approximate inside cabinet size (LxWxH)1175x885x625- 845 mm with door/lid closed • Floor space with doors/lid open (LxWxH) 1320x1200x2170mm • Minimum free air delivery required 680L/M @100 PSI at the machine entry point • Weight(nett): 175kg

32

www.navimportsaustralia.com.au

Metaltech Industrial Sandblaster Cabinet & Accessories MTSBC880 Metaltech 880 Litre Industrial Sandblaster Cabinet with Paralleled Working Position FEATURES:

• Industrial quality pistol - grip blasting gun with interchangeable ceramic nozzles • Extra heavy duty foot valve assembly allows pedal operation and media delivery • Powder coated steel construction • Heavy duty windowed door/ lid with gas struts, two safety locks & two side doors • Built in vacuum and filter system • Includes air regulator • Fluorescent lighting system • Underbelly hopper stores and recirculates blast media

SPECIFICATIONS:

• Approximate inside cabinet size (LxWxH) 600 x 1950 x 340- 570mm with doors/lid closed • Floor space with doors/lid closed (LxWxH) 991 x 2000 x 1738mm • Minimum free air delivery required 680L/min @ 100 PSI at the machine entry point • Weight(nett): 155kg

VACUM MOTOR AND AIR FILTER

PRESSURE GAUGE AIR REGULATOR

HAND HELD BLAST GUN

FOOT PEDAL OPERATION

2060(w)mm

991(w)mm

680(w)mm 1738(h) 1531(h)

675(w)mm

MTSBH1 Metaltech Sandblaster Hood Media Mask FEATURES:

• Heavy-duty durable fabric with synthetic leather construction • Adjustable internal helmet for added comfort • Large 120 x 60mm acrylic viewing plate for maximum visibility and protection • Reinforced side ventilation panels for increased air flow • Internal heavy duty hard hat for additional protection

33

www.navimportsaustralia.com.au

Sand & Soda Blasters Ideal for situations where rust and paint removal is required on multiple surfaces. For Sandblasting materials on the move. These portable kits provide versatility and maneuverability to take on small and large jobs alike.

Barcode: 9335319004199

10(38lt) Gallon Portable Sandblaster Kit Part No.

15009

Features & Specifications: • “Ready to Blast” kit includes safety mask, thread tape, sand funnel and 4 ceramic nozzle tips (2.4,2.7,3.2 and 3.6mm) • Hose length 300cm with hand held 13mm media delivery nozzle • Heavy duty fully welded, powder coated tank and frame with rubber grip handles • 5” heavy duty rubber wheels give the unit complete mobility • Minimum free air delivery required 340L/ min @90 PSI at the machine entry point • Media use 30-80 KG @ 125PSI (dependant on nozzle size) • Weight (nett) 23KG • Spare nozzle 4 pack (part no: 10460) (1 of EA 1.8, 2.3, 2.8 and 3.3mm)

Barcode: 9335319006780

20(76lt) Gallon Portable Sandblaster Kit Part No.

Features & Specifications:

15020

• “Ready to Blast” kit includes safety mask, thread tape, sand funnel and 4 ceramic nozzle tips (2.0, 2.5, 3, 3.5mm) • Hose length 300cm with dead man media delivery nozzle • Heavy duty fully welded, powder coated tank and frame with rubber grip handles • 5” heavy duty rubber wheels give the unit complete mobility • Minimum free air delivery required 10 LFM @90 PSI at the machine entry point • Media use 30- 80kg @125 PSI (Dependant on nozzle size) • Weight(nett):26kg • Spare nozzle 4 pack (part no: 15020N) (1 of EA 2.0, 2.5, 3 and 3.5mm)

Barcode: 9335319002119

28 Gallon Vacuum Sandblaster Part No.

Features & Specifications:

15025

Features: • Built in powerful 1200 Watt vacuum motor • Unique system separates abrasives from debris and recycles abrasive media for reuse.

• 105 litre/ 28 gallon heavy duty welded powder coated tank • Extremely maneuverable and efficient 6” rear wheels and swivel front castors.

• 240V 1200 watt vacuum motor • Tank size 41” (1030mm) x 15” (375mm) diameter • Minimum free air delivery required 640L/min @ 115 PSI at the machine entry point • Air inlet 1/2 NPT • Weight(nett): 32KG

Barcode: 9335319018646

76 Litre Dual Tank Abrasive/Soda Blaster Part No.

15005

Features & Specifications: • Each tank will hold 100lbs of media • Heavy duty fully welded, powder coated tanks and frame • Unique mixing value allows a change from soda to abrasive media at the flick of the valve • 300cm length hose with hand held media delivery nozzle • Minimum free air delivery required, 340L/min @120 PSI at the machine entry point • Weight(nett): 38KG

34

www.navimportsaustralia.com.au

Metaltech 7 Gallon Portable Soda Blaster MTSB07G Metaltech 7 Gallon (26.5Lt) Portable Soda Blaster APPLICATION:

Soda (bicarbonate of soda-based media) blasting is a low-impact, Eco-friendly way to clean a variety of surfaces. It facilitates a chemical free stripping of rust, paint, mould and even graffiti with minimum harm to the original surface material. It is even suitable for most fibreglass surfaces.

This lightweight, robust and portable unit is suitable for both the professional and serious home handyman by delivering versatility and maneuverability to take on small and large jobs alike.

FEATURES:

• Heavy duty, fully welded steel construction with powder coated finish to tank and frame for corrosion resistance.

• 40 lb tank capacity.

• 6” heavy duty rubber wheels give the unit complete mobility • Unique dual adjustable, hand held nozzle with replaceable ceramic tips, enables both media and air pressure delivery to be adjusted precisely.

• Air pressure regulator with inbuilt moisture trap included.

AIR REGULATOR MEDIA REGULATOR

SPECIFICATIONS:

• Minimum free air delivery required 280 Lt / min @ 90 psi • Working pressure 35 - 90 psi • Delivery nozzle hose length 1500mm • Single packed carton dimensions (L x W x H) 680 x 265 x 345 mm • Weight (nett) 13kg

335mm

795mm

SODIUM BICARBONATE MEDIA ONLY

328(w)mm

MTSB01 Metaltech Hand Held Soda Blaster

400(w)mm

FEATURES:

Heavy duty polypropylene resin and steel construction Ergonomically lightweight one handed operation with air pressure control 5mm replaceable, adjustable metal nozzle allows narrow or wide pattern for media delivery 1 litre tank capacity

SPECIFICATIONS:

Minimum free air delivery required: 8.5 Cfm @ 90psi Working pressure: 35 - 90 psi Packaged dimensions (L X W X H): 290 × 95 × 200mm Weight packaged(nett): 1/2 kg

35

www.navimportsaustralia.com.au

Metaltech Replacement Nozzle Sets Metaltech Nozzle Sets are used to replace worn or damaged nozzles on sandblaster guns and valves. These sets are designed for efficent sandblasting, with liquid or air cleaning of parts or surfaces.

4Pc Replacement Nozzles To Suit 15009 Part No. 10460

Specifications: Sizes - 2.4, 2.7, 3.2 and 3.6mm Suits: 15009 - 10 Gallon Portable Sandblaster Kit

4Pc Sandblasting Ceramic Nozzles to Suit 15420 and 15990 Part No.

10469

Specifications: Abrasives which can be used are; Garnet, Glass beads, Aluminium oxide and Walnut shell.

Suits: • 15420 & 15990- Industrial Sandblaster Cabinet • Sizes: 6mm, 7mm • Nozzle length: 35mm X 21mm diameter.

• Two of each sizes in one pack

4 Pc Ceramic Nozzles To Suit 15020 & 15005 Part No. 10462

Specifications: Ideal replacement nozzles for: • 15020 - 20 Gallon Portable Sandblaster Kit • 15005 - 76 Litre Dual Tank Abrasive/Soda Blaster • Nozzle sizes: 2 mm, 2.5 mm, 3 mm and 3.5 mm

10470-2Pc 6mm Sandblasting Ceramic Nozzles for 15420 & 5990 10471-2Pc 7mm Sandblasting Ceramic Nozzles for 15420 & 15990 Part No.

Ceramic Nozzle to Suit 15025 Part No. 10464

Specifications:

Part No.

10466

36

10470

10471

Abrasives which can be used are; Garnet,Glass beads, Aluminium oxide, Walnut shell Suits: 15420 & 15990- Industrial Sandblaster Cabinet Sizes: 6mm, 7mm Nozzle length: 35mm X 21mm diameter Two in a pack.

This Ceramic Nozzle Set is used to replace worn or damaged nozzles on a sandblaster guns and valves.

To suit 15025 - 28 Gallon Vacuum Sandblaster

4 Pc Ceramic Nozzle Set to Suit 15100, 15115 and 15350 Specifications: Durable ceramic construction.

Ideal replacement nozzles for: • 15100 - Bench Top Sandblasting Cabinet • 15115 - Vertical Sandblasting Cabinet • 15350 - Industrial Sandblaster Cabinet • Nozzle Sizes: 4.5,5,6 & 7mm

Specifications: Abrasives which can be used are; Garnet, Glass beads, Aluminium oxide and Walnut shell.

Suits: • 15420 & 15990- Industrial Sandblaster Cabinet • Sizes: 6mm, 7mm • Nozzle length: 35mm X 21mm diameter • Two in a pack.

Metaltech 2 Piece Soda Blaster Replacement Nozzle Set Part No.

Specifications:

10472

• Metaltech 2 Piece Soda Blaster Replacement Nozzle Set • Two replacement ceramic nozzles • To suit MTSB07G - Metaltech 7 Gallo Portable Soda Blaster • Sizes 2.0mm and 2.5mm

www.navimportsaustralia.com.au

Deadman Safety Gun, Replacement Nozzles & Sandblaster Accessories The Metaltech Sandblasting Deadman Safety Gun is the gun you need when safety is your top priority.

The gun switches off once the trigger is released to prevent accidents in the event of the operator losing control of the unit. It also assists in conserving media as there's no need to switch off the air pressure at the cabinet or blasting pot.

Just release the trigger and the gun stops spraying.

Air Sand Blasting Deadman Gun w/4 Ceramic Nozzles Tips Part No.

10520

Specifications: • Fast on/off • Spring loaded paddle trigger • Conserves media and reduces mess • Nonslip vinyl grip • Nozzle sizes: 2 mm, 2.5 mm, 3 mm and 3.5 mm • Air inlet: 1/4'' NPT • Blocks and seals the grit flow immediately when the handle is released.

• Fits Most Pressure & Cabinet Sandblasters • Adaptor may be needed to fit some models of sand blaster

Rubber Pad To Suit 10520 Part No. 15020PAD

Specifications: Replacement Rubber Pad to suit: • 10520 - Air Sand Blasting Deadman Gun W/4 Ceramic Nozzles Tips

Quality, genuine spare part replacement sandblaster guns.

Replacement Sandblaster Gun To Suit 15100 Part No. 10530

Specifications: To suit: 15100 - Bench Top Sandblasting Cabinet 15115 - Vertical Sandblasting Cabinet (replacement nozzles not included).

Siphon Feed Abrasive Blasting Kit Part No. 10542

Specifications: Air consumption: 8CFM Inlet: 1/4" NPT (fitting supplied) Weight(net): 1.5kg

Replacement Sandblaster Gun for 15350, 15420, 15990 Part No. 10535

Specifications: To suit: 15100 - Bench Top Sandblasting Cabinet 15115 - Vertical Sandblasting Cabinet (replacement nozzles not included).

37

www.navimportsaustralia.com.au

Garnet Mesh, Glass Beads & Sodium Bicarbonate Soda Garnet Mesh Grit 25kg & 1000kg Specifications: Used in suction guns, pressure pots, sandblasting cabinets etc for the removal of rust, paint and mill space on metal, wood plastic and many more surfaces. Ideal for preparing surface for painting or priming. Grade garnet free of Airborne Silica.

15000

30-60 GRIT 25KG

15003

30-60 GRIT 1000KG (TONNE)

Glass Beads are used for sandblasting to clean any surface on products such as metal, wood, plastic & many more.

Ideal for removal of rust & paint ready for repainting.

Glass Beads 106-300 Micron 25kg Part No.

15001

Specifications: Glass Beads Use: • Sandblast Cabinets • Pressure Pots • Suction Guns • Glass Beads Removal of Rust/Paint • Grade; Medium No.4/106-300 Micron/Inda • Weight 25kg

Soda Blasting Equipment uses the soda as abrasive and is most cost effective way to remove the stains and dirt from the objects without damaging their original shape. Sodium Bicarbonate is most commonly used for removing paint from thin or precious materials like alloy, aluminium etc. The sodium bicarbonate used for industrial soda blasting is a larger granule than the type that is in your kitchen. Soda Bi Carbonate explodes on surface impact and turns into powder.

Baking soda is softer than other sand blasting abrasives.

Barcode: 9335319005004

Sodium Bicarbonate Ultra Coarse Soda Part No.

15002

38

Specifications: Soda blasting is environmentally friendly. Sandblasting with soda is completely harmless and highly effective in removing paint to prepare the surface for painting.

Soda blasting Blast Media Use: • Sandblast Cabinets • Pressure Pots • Suction Guns • Glass Beads Removal of Rust/Paint • Grade; Ultra course

www.navimportsaustralia.com.au

Sandblaster Accessories

Vacuum Motor To Suit 15025 Part No. 15025#33

Blast Gun Body To Suit 15025

Specifications:

Part No.

Specifications:

Vacuum Motor To Suit 15025 - 28 Gallon Vacuum Sandblaster

15025#9

Blast Gun Body to suit 15025 - 28 Gallon Vacuum Sandblaster

Blast Head To Suit 15025

Brush Head to Suit 15025

Part No.

Specifications:

Part No.

Specifications:

15025#8

Blast Head to suit 15025 - 28 Gallon Vacuum Sandblaster

15025#7

Brush Head to suit 15025 - 28 Gallon Vacuum Sandblaster

Quality, genuine spare part replacements to suit Metaltech Sandblasters.

Adaptor to Suit 15100 Part No. 15100A

Fluro Light to Suit 15100 Specifications:

Adaptor to suit 15100 - Bench Top Sandblasting Cabinet

Part No. 15100F

Specifications: Fluro Light to suit 15100 - Bench Top Sandblasting Cabinet

These Heavy duty sandblast gloves are manufactured to the highest quality from latex & are designed specifically to protect your hands while operating any sandblasting cabinet.

Sandblasting Gloves to Suit 15100 & 15115 Part No. 15100G

Specifications: Glove Dimensions, Length: 450mm Diameter Opening: 160mm ID Glove Thickness: 1mm

Sandblasting Gloves to Suit 15350 & 15420 Part No. 15350G

Specifications: Glove Dimensions Length: 600mm Diameter Opening: 200mm ID Glove Thickness: 1mm

39

www.navimportsaustralia.com.au

Sandlblaster Accessories Quality, genuine spare part replacements to suit Metaltech Sandblasters.

Sandblasting Gloves to Suit 15100 & 15115 Part No. 15100G

Specifications: Glove Dimensions, Length: 450mm Diameter Opening: 160mm ID Glove Thickness: 1mm

Sandblasting Gloves to Suit 15350 & 15420 Part No. 15350G

Specifications: Glove Dimensions Length: 600mm Diameter Opening: 200mm ID Glove Thickness: 1mm

Protective Work Shield Film Part No.

Specifications: Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet.

15100W

Used for: 15100 - Bench Top Sandblasting Cabinet Size: 400(w) x 300mm

15115W

To suit: 15115 - Vertical Sandblasting Cabinet Size: 550(w) x 250mm

Protective Work Shield Film to Suit 15990 Part No.

Specifications:

Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet.

15990W

Protective Work Shield Film to Suit 15420 & 15350

Barcode: 9335

Part No.

Hose to Suit 15420 Part No. 15420H

To suit: 15990 - Industrial Sandblasting Cabinet Size:660(w) x 300mm

Features & Specifications: Hose to suit: 15420 - Industrial Sandblaster Cabinet

Specifications: Protective work shields are used to protect Perspex and glass from abrasive media used in sand blasting cabinet.

15420W

To suit: • 15350 - Industrial Sandblaster Cabinet • 15420 - Industrial Sandblaster Cabinet • Sizes: 550(w) x 250mm and 595(w) x100mm

Grip Replacement Foot Pedal Assembly Part No.

Specifications:

15350FP

Quality, genuine spare part replacement foot pedal assembly to suit: 15350 - Industrial Sandblaster Cabinet 15420 - Industrial Sandblaster Cabinet 15990 - Industrial Sandblasting Cabinet MTSBC880 - Metaltech 880 Litre Industrial Sandblaster Cabinet

40

Valve And Gauge to Suit 15420 Part No. 15420V

Specifications: Valve and Gauge to suit: 15420 - Industrial Sandblaster Cabinet

www.navimportsaustralia.com.au

Grip Castors and Wheels AAA RED SERIES EXTREME HEAVY DUTY fabricated steel componentry with black zinc finish for corrosion resistance. Cast iron double ball bearing core centered wheel with moulded polyurethane outer. Suitable for mobile platforms, heavy machinery, warehouse equipment, transport and logistics applications that require the shock protection of the moulded polyurethane outer and a towable option.

POLYURETHANE CAST IRON WHEEL CASTORS(FIXED)

GRIP INDUSTRIAL AAA RED SERIES

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150x50

1000

206

149x110x8

113x70

25x13(S*)

200x63

1400

264

174x174x10

140x140

15(R*)

CASTOR

Diameter (mm)

41948 41949

Bearings

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41948

16

8

41949

16

10

POLYURETHANE CAST IRON WHEEL CASTORS(SWIVEL)

GRIP INDUSTRIAL AAA RED SERIES

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150x50

1000

206

43

149x110x8

113x70

25x13(S*)

200x63

1400

264

56

174x174x10

140x140

15(R*)

CASTOR

Diameter (mm)

41950 41952

Bearings

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41950

16

8

41952

16

10

POLYURETHANE CAST IRON WHEEL CASTORS(SWIVEL/BRAKE)

GRIP INDUSTRIAL AAA RED SERIES

OUTSIDE DIAMETER WIDTH

BALL BEARINGS

ROLLER BEARING

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150x50

1000

206

46

149x110

113x70

25x13(S*)

200x63

1400

264

59.5

174x174

140x140

15(R*)

CASTOR

Diameter (mm)

41953 41954

Bearings

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41953

16

8

41954

16

10

AXLE ON WHEEEL ONLY

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

41

www.navimportsaustralia.com.au

Grip Castors and Wheels AAA GREY SERIES EXTREME HEAVY DUTY fabricated steel componentry with black zinc finish for corrosion resistance. Full cast iron, double ball bearing core centered wheel. Suitable for use on automotive assembly lines, aviation trolleys and in production manufacturing plants.

CAST IRON WHEEL CASTORS(FIXED)

GRIP INDUSTRIAL AAA GREY SERIES

CASTOR

Diameter (mm)

41961 41963

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150x50

1400

206

149x110x8

113x70

25x13(S*)

200x63

1600

264

174x174x10

140x140

15(R*)

Bearings

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41961

16

8

41963

16

10

CAST IRON WHEEL CASTORS(SWIVEL)

GRIP INDUSTRIAL AAA GREY SERIES

CASTOR

Diameter (mm)

Bearings

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm) (mm)

41964

150x50

1400

206

43

149x110x8

113x70

25x13(S*)

41966

200x63

1600

264

56

174x174x10

140x140

15(R*)

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41964

16

8

41966

16

10

CAST IRON WHEEL CASTORS(SWIVEL/BRAKE)

GRIP INDUSTRIAL AAA GREY SERIES

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150x50

1400

206

43

149x110x8

113x70

25x13(S*)

200x63

1600

264

59.5

174x174x10

140x140

15(R*)

CASTOR

Diameter (mm)

41967 41968

Bearings

CASTOR

Axle Diameter(mm)

Component Bracket Thickness(mm)

41967

16

8

41968

16

10

AAA BLACK SERIES Heavy duty gal plated fabricated steel componentry with full cast iron, fitted grease nipple, solid roller bearing wheel. Ideal for external skip and general rubbish bin applications.

GRIP INDUSTRIAL BLACK SERIES CASTOR WITH FULL CAST IRON WHEEL(SWIVEL)

43022

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

102x50

300

135

20

115x100

85x73

20x11(S*)

152x50

600

189

31

115x100

85x73

20x11(S*)

CASTOR

Diameter (mm)

43022 43032

Bearings

43032

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

42

www.navimportsaustralia.com.au

Grip Castors and Wheels CASTOR WITH FULL CAST IRON WHEEL(FIXED)

43021

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

102x50

300

135

115x100

85x73

20x11(S*)

152x50

600

189

115x100

85x73

20x11(S*)

CASTOR

Diameter (mm)

43021 43029

Bearings

43029

RED SERIES 1 Gal plated fabricated steel componentry with cast iron, fitted grease nipple, roller bearing core centred wheel with moulded polyurethane outer.

PU MOULDED CAST IRON WHEEL CASTOR(FIXED)

GRIP INDUSTRIAL RED SERIES 1

GRIP INDUSTRIAL RED SERIES 1

GRIP INDUSTRIAL RED SERIES 1

GRIP INDUSTRIAL RED SERIES 1

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x50

230

135

115x100

85x73

20x11(S*)

125x50

280

159

115x100

85x73

20x11(S*)

CASTOR

Diameter (mm)

43037 43016

Bearings

43039

152x50

360

189

115x100

85x73

20x11(S*)

43041

200x50

480

235

115x100

85x73

20x11(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

PU MOULDED CAST IRON WHEEL CASTOR(SWIVEL) CASTOR

Diameter (mm)

43036

100x50

230

135

20

115x100

85x73

20x11(S*)

43033

125x50

280

159

20

115x100

85x73

20x11(S*)

43038

125x50

360

189

31

115x100

85x73

20x11(S*)

43040

200x50

460

235

39.5

115x100

85x73

20x11(S*)

Bearings

PU MOULDED CAST IRON WHEEL CASTOR(SWIVEL/BRAKE) CASTOR

Diameter (mm)

43035

100x50

Bearings

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

230

135

20

115x100

85x73

20x11(S*)

43034

125x50

280

159

20

115x100

85x73

20x11(S*)

43039A

152x50

360

189

31

115x100

85x73

20x11(S*)

100MM PU MOULDED CAST IRON REPLACEMENT WHEEL CASTOR

Diameter (mm)

Roller Bearings

MAX.* Load Cap.

Hub

Bore Diameter(mm)

Width (mm) 52160

100x50

230

62.5

13

52161

125x50

280

62.5

13

52162

152x50

400

62.5

13

52163

200x50

500

62.5

13

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

43

www.navimportsaustralia.com.au

Grip Castors and Wheels RED SERIES 2 Gal plated fabricated steel componentry with polypropylene core centred, roller bearing wheel with moulded polyurethane outer.

GRIP INDUSTRIAL RED SERIES 2

PU CASTOR MOULDED PP CORE(R)(FIXED) CASTOR

Diameter (mm)

Bearings

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

42091

100x50

230

135

115x100

85x73

20x11(S*)

42094

125x50

250

159

115x100

85x73

20x11(S*)

42097

125x50

300

189

115x100

85x73

20x11(S*)

PU CASTOR MOULDED PP CORE(R) (SWIVEL)

GRIP INDUSTRIAL RED SERIES 2

GRIP INDUSTRIAL RED SERIES 2

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x50

230

135

20

115x100

85x73

20x11(S*)

42095

125x50

250

159

30

115x100

85x73

20x11(S*)

42098

152x50

300

189

31

115x100

85x73

20x11(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

CASTOR

Diameter (mm)

42092

Bearings

PU CASTOR MOULDED PP CORE(R) (SWIVEL/BRAKE) CASTOR

Diameter (mm)

42093

100x50

200

135

20

115x100

85x73

20x11(S*)

42096

125x50

250

159

30

115x100

85x73

20x11(S*)

42099

152x50

300

189

31

115x100

85x73

20x11(S*)

Bearings

RED SERIES 3 Black baked enamel finished fabricated steel componentry with steel core centred, solid rubber outer wheel with double ball bearings.

GRIP INDUSTRIAL RED SERIES 3

GRIP INDUSTRIAL RED SERIES 3

RUBBER STEEL CORE CASTOR(FIXED) CASTOR

Diameter (mm)

42087 42089

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

160x50

150

192

115x100

85x73

20x11(S*)

206x58

235

238

115x100

85x73

20x11(S*)

Bearings

RUBBER STEEL CORE CASTOR(SWIVEL) MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

160x50

150

192

31

115x100

85x73

20x11(S*)

206x58

235

238

39.5

115x100

85x73

20x11(S*)

CASTOR

Diameter (mm)

42088 42090

Bearings

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

44

www.navimportsaustralia.com.au

Grip Castors and Wheels RED SERIES 4 Pressed steel, gal plated componentry with aluminum core centred, ball bearing wheel with moulded polyurethane outer and 2 piece dust cover.

PU MOULDED ALUMINIUM CORE CASTOR(FIXED)

GRIP INDUSTRIAL RED SERIES 4

CASTOR

Diameter (mm)

41994 41997

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

160x50

150

192

115x100

85x73

20x11(S*)

125x38

250

154

105x88

80x60

9x10.5(S*)

Bearings

PU MOULDED ALUMINIUM CORE CASTOR(SWIVEL)

GRIP INDUSTRIAL RED SERIES 4

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

200

128

36

106x86

80x60

9.5x11.5(S*)

125x38

250

153

39

106x86

80x60

9.5x11.5(S*)

CASTOR

Diameter (mm)

41995 41998

Bearings

PU MOULDED ALUMINIUM CORE CASTOR(SWIVEL)

GRIP INDUSTRIAL RED SERIES 4

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

200

128

40

106x86

80x60

9.5x11.5(S*)

125x38

250

153

39

106x86

80x60

9.5x11.5(S*)

CASTOR

Diameter (mm)

41996 41999

Bearings

PU MOULDED PP CORE(B) CASTOR(FIXED)

GRIP INDUSTRIAL RED SERIES 4

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

200

154

105x87

80x60

9x10.5(S*)

125x38

200

154

106x87

80x60

9x10.5(S*)

CASTOR

Diameter (mm)

41988 41991

Bearings

PU MOULDED PP CORE(B) CASTOR (SWIVEL)

GRIP INDUSTRIAL RED SERIES 4

OUTSIDE DIAMETER WIDTH

BALL BEARINGS

ROLLER BEARING

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

150

128

36.5

106x86

80x60

9.5x13.5(S*)

125x38

200

153

39

106x86

80x60

9.5x13.5(S*)

CASTOR

Diameter (mm)

41989 41992

AXLE ON WHEEEL ONLY

Bearings

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

45

www.navimportsaustralia.com.au

Grip Castors and Wheels PU MOULDED PP CORE(B) CASTOR(SWIVEL/BRAKE)

GRIP INDUSTRIAL RED SERIES 4

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

150

128

40

106x86

80x60

9.5x13.5(S*)

125x38

200

153

39

106x86

80x60

9.5x13.5(S*)

CASTOR

Diameter (mm)

41990 41993

Bearings

100MM PU MOULDED CAST IRON REPLACEMENT WHEEL

GRIP INDUSTRIAL RED SERIES 4

CASTOR

Diameter (mm)

Ball Bearings

MAX.* Load Cap.

Hub

Bore Diameter(mm)

Width (mm) 52164

100x36

2000

51

10

52165

125x38

3000

51

10

Hub

Bore Diameter(mm)

100MM PU MOULDED PP CORE REPLACEMENT WHEEL

GRIP INDUSTRIAL RED SERIES 4

CASTOR

Diameter (mm)

Ball Bearings

MAX* Load Cap.

Width (mm)

OUTSIDE DIAMETER WIDTH

BALL BEARINGS

ROLLER BEARING

52169

100x36

150

51

10

52170

125x38

200

51

10

AXLE ON WHEEEL ONLY

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

46

www.navimportsaustralia.com.au

Grip Castors and Wheels BLUE SERIES 1 GAL PLATED PRESSED STEEL componentry with one piece hard nylon castor wheel with quality tapered roller bearings with 2 piece dust covers.

Durable and economical castors suitable for use on smooth surfaces in multipurpose applications.

BLUE NYLON CASTOR(FIXED)

GRIP INDUSTRIAL BLUE SERIES 1

CASTOR

Diameter (mm)

41978 41983

MAX.* Load Cap.

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

200

129

105x87

80x60

9x10.5(S*)

125x38

250

154

106x87

80x60

9x10.5(S*)

Bearings

BLUE NYLON CASTOR(SWIVEL)

GRIP INDUSTRIAL BLUE SERIES 1

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x36

200

128

36.5

106x86

80x60

9.5x13.5(S*)

125x38

250

153

39

106x86

80x60

9.5x13.5(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

CASTOR

Diameter (mm)

41979 41984

Bearings

BLUE NYLON CASTOR(SWIVEL/BRAKE)

GRIP INDUSTRIAL BLUE SERIES 1

CASTOR

Diameter (mm)

41980

125x38

250

153

39

106x86

80x60

9.5x13.5(S*)

41985

125x38

250

153

39

106x86

80x60

9.5x13.5(S*)

Bearings

BLUE NYLON CASTOR(SWIVEL)

GRIP INDUSTRIAL BLUE SERIES 1

MAX.* Load Cap.

Height (mm)

Offset (mm)

Bolt Hole Sp*(mm)

100x36

200

125

36

12.5

125x38

250

150

39

12.5

MAX.* Load Cap.

Height (mm)

Offset (mm)

Bolt Hole Sp*(mm)

CASTOR

Diameter (mm)

41981 41986

Bearings

BLUE NYLON CASTOR(SWIVEL/BRAKE)

GRIP INDUSTRIAL BLUE SERIES 1

CASTOR

Diameter (mm)

41982

100x36

200

125

40

12.5

41987

125x38

250

150

39

12.5

Bearings

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

47

www.navimportsaustralia.com.au

Grip Castors and Wheels BLUE SERIES 2 Gal plated pressed steel componentry with nylon core centred blue elastic rubber outer wheels(non marking) with quality roller bearings.

Ideal for hospital and shopping centre applications.

GRIP INDUSTRIAL BLUE SERIES 1

100MM BLUE ELASTIC RUBBER WHEELS CASTOR

Diameter (mm)

Roller Bearings

MAX.* Load Cap.

Bore Diameter

Hub Width (mm)

52050

100x32

100

38

12

52051

125x36

150

44

12

52052

160x50

200

58

20

52053

200x50

280

58

20

BLUE ELASTIC RUBBER CASTOR(FIXED)

GRIP INDUSTRIAL BLUE SERIES 2

CASTOR

Diameter (mm)

43001

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x32

100

121.5

102x84

72x60

9x14(S*)

43005

125x36

150

147

102x84

72x60

9x14(S*)

42063

160x50

200

192

130x95

103x73

19x16(S*)

42067

200x360

280

233

130x95

103x73

19x16(S*)

Bearings

BLUE ELASTIC RUBBER CASTOR(SWIVEL)

GRIP INDUSTRIAL BLUE SERIES 2

CASTOR

Diameter (mm)

43002

Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x32

100

121.5

32

102x84

73x60

9x14(S*)

43004

125x36

150

147

35

102x84

73x60

9x14(S*)

42062

160x50

200

192

50

131x104

105x77

11x16(S*)

42068

200x50

280

233

52

131x104

105x77

11x16(S*)

Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

Bearings

BLUE ELASTIC RUBBER CASTOR(SWIVEL/BRAKE)

GRIP INDUSTRIAL BLUE SERIES 2

CASTOR

Diameter (mm)

43003

100x32

100

121.5

32

102x84

73x60

9x14(S*)

43006

100x36

150

147

35

102x84

73x60

9x14(S*)

42064

160x50

200

192

50

131x104

105x80

11x16(S*)

42069

200x50

280

233

52

131x104

105x77

11x16(S*)

Bearings

100MM BLUE NYLON WHEELS REPLACEMENT WHEELS

GRIP INDUSTRIAL BLUE SERIES 1

CASTOR

Diameter (mm)

Ball Bearings

Load Cap.

Hub

Bore Diameter(mm)

Width (mm) 52173

100x36

200

51

10

52174

125x38

250

51

10

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

48

www.navimportsaustralia.com.au

Grip Castors and Wheels BLACK SERIES 1 Grip industrial black series castor wheels feature precision ball and roller bearing technology coupled with quality fabricated and pressed steel componentry.

RUBBER MOULDED IRON WHEEL CASTOR(FIXED)

GRIP INDUSTRIAL BLACK SERIES 1

CASTOR

Diameter (mm)

42078

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x50

150

135

115x100

85x73

20x11(S*)

42081

125x50

180

159

115x100

85x73

20x11(S*)

42084

125x50

180

159

115x100

85x73

20x11(S*)

Bearings

RUBBER MOULDED IRON WHEEL CASTOR(SWIVEL) MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x50

150

135

20

115x100

85x73

20x11(S*)

42082

125x50

180

159

30

115x100

85x73

20x11(S*)

42085

150x50

250

189

31

115x100

85x73

20x11(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

CASTOR

Diameter (mm)

42079

Bearings

RUBBER MOULDED IRON WHEEL CASTOR(SWIVEL) CASTOR

Diameter (mm)

42080

100x50

150

135

20

115x100

85x73

20x11(S*)

42083

125x50

180

159

30

115x100

85x73

20x11(S*)

42086

150x50

250

189

31

115x100

85x73

20x11(S*)

Bearings

BLACK SERIES 2 Gal plated pressed steel componentry with steel core centred black rubber moulded wheels with quality roller bearings. General purpose light industrial, commercial and home applications.

RUBBER MOULD STEEL CORE CASTOR(FIXED)

GRIP INDUSTRIAL BLACK SERIES 2

OUTSIDE DIAMETER WIDTH

BALL BEARINGS

ROLLER BEARING

CASTOR

Diameter (mm)

43017

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

75x20

50

94

70x62

53x40

8.5x11(S*)

43024

100x30

70

121.5

100x85

72x60

9x14(S*)

43025A

125x37

100

147

104x83

72x60

9x14(S*)

43027

160x40

145

195

130x95

103x73

11x16(S*)

43031

200x50

185

235

130x95

103x73

11x16(S*)

AXLE ON WHEEEL ONLY

Bearings

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

49

www.navimportsaustralia.com.au

Grip Castors and Wheels RUBBER MOULD STEEL CORE CASTOR(SWIVEL)

GRIP INDUSTRIAL BLACK SERIES 2

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

75x20

50

94

28

70x58

54x41

8.5x11(S*)

43023

100x30

70

121.5

32

102x84

73x60

9x14(S*)

43025B

125x37

100

147

35

102x84

73x60

9x14(S*)

43026

160x40

145

195

52

131x104

105x80

11x16(S*)

43030

200x50

185

235

52

131x104

105x80

11x16(S*)

CASTOR

Diameter (mm)

43015

Bearings

RUBBER MOULD STEEL CORE CASTOR(SWIVEL/BRAKE)

GRIP INDUSTRIAL BLACK SERIES 2

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

75x20

50

94

28

70x58

54x41

8.5x11(S*)

43025

100x30

70

121.5

32

102x84

73x60

9x14(S*)

43025C

125x37

100

147

35

102x84

73x60

9x14(S*)

43028

160x40

145

195

52

131x104

105x80

11x16(S*)

CASTOR

Diameter (mm)

43018

Bearings

BLACK SERIES 3 Gal plated pressed steel componentry with piece rubber only wheels and plain axel shafts. Light duty applications.

PLAIN BEARING RUBBER SWIVEL CASTOR(POLYPROPYLENE)

GRIP INDUSTRIAL BLACK SERIES 3

Diameter (mm)

42054

2x50x17

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

80

71

32

60x60

43x43

13x6.3(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

30

65

21

58x48

46x35

6.3(R*)

Bearings

PLAIN BEARING RUBBER WHEEL CASTOR(SWIVEL)

GRIP INDUSTRIAL BLACK SERIES 3

OUTSIDE DIAMETER WIDTH

CASTOR

BALL BEARINGS

ROLLER BEARING

CASTOR

Diameter (mm)

43010

50x22

AXLE ON WHEEEL ONLY

Bearings

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

50

www.navimportsaustralia.com.au

Grip Castors and Wheels CHROME SERIES 1 Chrome plated pressed steel componentry with grey polypropylene core centred thermoplastic rubber wheels(non marking) with quality ball bearings and 2 piece dust cover.

GREY TPR CASTOR(SWIVEL)

GRIP INDUSTRIAL CHROME SERIES 1

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

BoltHole Sp*(mm)

Hole Size (mm)

80x32

100

114

28.5

92x64

75x45

♦ (R*/S*)

42074

100x32

130

138

35

92x64

75x45

♦ (R*/S*)

42076

125x32

150

161

33.7

92x64

75x45

♦ (R*/S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

CASTOR

Diameter (mm)

42072

Bearings

♦ 8.5/8.5x11

GRIP INDUSTRIAL CHROME SERIES 1

GREY TPR CASTOR (SWIVEL/BRAKE) CASTOR

Diameter (mm)

42073

80x32

100

114

30.5

92x64

75x45

♦ (R*/S*)

42075

100x32

130

138

35

92x64

75x45

♦ (R*/S*)

42077

125x32

150

161

28

92x64

75x45

♦ (R*/S*)

Bearings

♦ 8.5/8.5x11

GREY SERIES 1 Nickel plated pressed steel componentry with steel core centred, grey coloured thermoplastic rubber wheels with quality roller bearings.

GRIP INDUSTRIAL GREY SERIES 1

GRIP INDUSTRIAL GREY SERIES 1

GRIP INDUSTRIAL GREY SERIES 1

GREY STEEL CORE CASTOR(FIXED) CASTOR

Diameter (mm)

Bearings

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

43051

75x20

50

94

70x62

53x40

8.5x11(S*)

43054

100x30

70

121.5

100x85

72x60

9x14(S*)

43057

125x37

100

147

100x85

72x60

9x14(S*)

GREY STEEL CORE CASTOR(SWIVEL) MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

75x20

50

94

28

70x58

54x41

8.5x11(S*)

43055

75x20

70

121.5

32

102x84

73x60

9x14(S*)

43058

125x37

100

147

35

102x84

73x60

9x14(S*)

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

CASTOR

Diameter (mm)

43052

Bearings

GREY STEEL CORE CASTOR(SWIVEL/BRAKE) CASTOR

Diameter (mm)

43053

72x50

50

94

28

70x58

54x41

8.5(R*)

43056

100x30

70

121.5

32

102x84

73x60

9x14(S*)

43059

125x37

100

147

35

102x84

73x60

9x14(S*)

Bearings

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

51

www.navimportsaustralia.com.au

Grip Castors and Wheels GREY SERIES 2(INSTITUTIONAL) Nickel plated pressed steel componentry with grey polypropylene core centred thermoplastic rubber wheels(non marking) with quality ball bearings and 2 piece dust cover.

GREY INSTITUTIONAL CASTOR(FIXED)

GRIP INDUSTRIAL GREY SERIES 2

MAX.* LoadCap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

50x20

40

69.5

60x60

43x43

13x6.3(S*)

42004

75x25

70

100

60x60

43x43

13x6.3(S*)

42008

100x27

100

134

76x76

55x55

15.5x8.5(S*)

42012

125x27

130

157

76x76

55x55

15.5x8.5(S*)

CASTOR

Diameter (mm)

42000

Bearings

GREY INSTITUTIONAL CASTOR(SWIVEL)

GRIP INDUSTRIAL GREY SERIES 2

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

50x20

40

69.5

24

60x60

43x43

13x6.3(S*)

42005

75x25

70

100

28

65x65

48x48

12x6.3(S*)

42009

100x27

100

134

37

76x76

55x55

15.5x8.5(S*)

42013

125x27

130

157

45

76x76

55x55

15.5x8.5(S*)

CASTOR

Diameter (mm)

42001

Bearings

Hole Size (mm)

GREY INSTITUTIONAL CASTOR WITH PP CORE(SWIVEL/BRAKE)

GRIP INDUSTRIAL GREY SERIES 2

GRIP INDUSTRIAL GREY SERIES 2

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

50x20

40

69.5

24

60x60

43x43

13x6.3(S*)

42006

75x25

70

100

28

60x60

43x43

13x6.3(S*)

42010

100x27

100

134

37

76x76

55x55

15.5x8.5(S*)

42014

125x27

130

157

45

76x76

55x55

15.5x8.5(S*)

CASTOR

Diameter (mm)

42002

Bearings

GREY INSTITUTIONAL CASTOR(SWIVEL/BRAKE) MAX.* Load Cap.

Height (mm)

Offset (mm)

Bolt Hole Sp*(mm)

50x20

40

69.5

24

12.5

42007

75x25

70

100

28

12.5

42011

100x27

100

134

37

12.5

42015

125x27

130

157

45

12.5

CASTOR

Diameter (mm)

42003

Bearings

GREY SERIES 3 Nickel plated pressed steel componentry with grey polypropylene centred wheels with moulded dark grey rubber outers, plain axel shafts light duty applications.

GRIP INDUSTRIAL GREY SERIES 3

52

GREY TPR CASTOR(SWIVEL) CASTOR

Diameter (mm)

42055

2x50x20

Bearings

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

70

70

32

60x60

43x43

13x6.3(S*)

www.navimportsaustralia.com.au

Grip Castors and Wheels WHITE SERIES 1 Gal plated, pressed steel componentry with white polypropylene core centred, moulded polyurethane shock absorbent insert and white polypropylene outers with quality roller bearings. Ideal for internal use where the load is sensitive and needs cushioning.

PP SANDWICH CASTOR(FIXED)

GRIP INDUSTRIAL WHITE SERIES 1

CASTOR

Diameter (mm)

42056 42058

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x32

100

121.5

102x84

73X60

9X14(S*)

125x35

180

146

102x84

73X60

9X14(S*)

Bearings

PP SANDWICH CASTOR (SWIVEL)

GRIP INDUSTRIAL WHITE SERIES 1

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

100x32

110

128

39

100x8

80X60

13X9(S*)

125x35

150

152

35

100x80

80X60

13X9(S*)

CASTOR

Diameter (mm)

42057 42059

Bearings

WHITE SERIES 2 Gal plated pressed steel componentry with white polypropylene core centred, white nylon outer and plain axel shafts stock bearings. Lightweight duty, home use applications.

NYLON PP CORE CASTOR(FIXED)

GRIP INDUSTRIAL WHITE SERIES 2

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

75x23.5

90

100

100x59

80.5x40

8.4(R*)

100x30

145

132

100x59

80.5x40

8.4(R*)

Diameter (mm)

43007 43011

Bearings

PLAIN BEARING RUBBER WHEEL CASTOR(SWIVEL)

GRIP INDUSTRIAL WHITE SERIES 2

OUTSIDE DIAMETER WIDTH

MAX.* Load Cap.

CASTOR

BALL BEARINGS

ROLLER BEARING

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

75x23.5

90

100

28

65x65

48x48

12x6.3(S*)

100x30

145

134

37

76x76

55x55

15.5x8.5(S*)

CASTOR

Diameter (mm)

43008 43012

AXLE ON WHEEEL ONLY

Bearings

Hole Size (mm)

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

53

www.navimportsaustralia.com.au

Grip Castors and Wheels SILVER SERIES 1 Quality 2 piece, gal plated, pressed steel, some greasable, rims fitted with flange style ball bearings and lightweight polyurethane foam filled puncture proof tyres.

260MM PU RUBBER FOAM FILLED PUNCTURE PROOF OFFSET WHEEL

GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 1

WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Rim

Tyre Size

52102

260x78

3/4" offset

180

Ball Bearing

Two piece

4.10 x 3.50-4

52108

260x78

5/8" offset

180

Ball Bearing

Two piece

4.10 x 3.50-4

260MM PU RUBBER FOAM FILLED PUNCTURE PROOF OFFSET WHEEL

GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 1

WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Rim

Tyre Size

52101

260

3/4" offset

136

Ball Bearing

Two piece

4.10/3.50-4

52106

260

5/8" offset

136

Ball Bearing

Two piece

4.10/3.50-4

SILVER SERIES 2 Quality 2 piece, gal plated, pressed steel rims with flange style ball bearings and pneumatic rubber tubed tyres.

260MM PNEUMATIC OFFSET WHEEL

GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 2

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Rim

Tyre Size

52103

260

3/4" offset

136

Ball Bearing

Two piece

4.10 x 3.50-4

52105

260

5/8" offset

136

Ball Bearing

Two piece

4.10/3.50-4

260MM PNEUMATIC OFFSET WHEEL

GRIP INDUSTRIAL SILVER SERIES REPLACEMENT WHEELS 2

OUTSIDE DIAMETER WIDTH

WHEEL

BALL BEARINGS

ROLLER BEARING

WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Rim

Tyre Size

52104

260

5/8" Centered

136

Ball Bearing

Two piece

4.10 x 3.50-4

AXLE ON WHEEEL ONLY

BOLT HOLE SP(mm) Spacing

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

54

www.navimportsaustralia.com.au

Grip Castors and Wheels BLACK SERIES WHEELS Gal plated fabricated steel componentry with steel core centred, double ball bearing wheel and pneumatic and foam rubber(non flat) tyres. Ideal for external, rough terrain extreme duty applications.

PNEUMATIC WHEEL CASTOR(FIXED)

GRIP INDUSTRIAL BLACK SERIES CASTOR WHEELS

WHEEL

Diameter (mm)

42070

260x90

Bearings

MAX.* Load Cap.

Height (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150

300

115x100

85X73

20x11(S*)

PNEUMATIC WHEEL CASTOR(SWIVEL)

GRIP INDUSTRIAL BLACK SERIES CASTOR WHEELS

260x90

MAX.* Load Cap.

Height (mm)

Offset (mm)

Base Plate (mm)

Bolt Hole Sp*(mm)

Hole Size (mm)

150

300

50

115x100

85x73

20x11(S*)

GRIP INDUSTRIAL BLACK SERIES REPLACEMENT WHEELS D

F TH R E A UR

Bolt Hole Sp*(mm)

Hole Size (mm)

260x90

150

300

115x100

85x73

20x11(S*)

260x90

150

300

41976

41977

Bearings

50

115x100

85x73

20x11(S*)

ONE PIECE STEEL RIM FLAT FREE WHEEL WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Boss size (mm)

Tyre tread pattern

Tyre Size

52120

400

25mm steel Centered

180

Ball Bearing

99

Knobby

4.80/4.00-80

ONE PIECE STEEL RIM FLAT FREE WHEEL WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Boss size (mm)

Tyre tread pattern

Tyre Size

52121

400

25mm steel Centered

180

Ball Bearing

98

Turf

16 x 650-10

MO A

N D T HR E

OB N

BY TH R E

AD

F TH R E A UR

AD

AY THR E HW

D

HI

Base Plate (mm)

AD

G

Height (mm)

Diameter (mm)

K

D EA

BBY THR NO

MAX.* Load Cap.

WHEEL

DI

GRIP INDUSTRIAL BLACK SERIES REPLACEMENT WHEELS K

42071

Bearings

T

41977

T

Diameter (mm)

PUNCTURE PROOF FOAM RUBBER CASTOR WHEEL(FIXED & SWIVEL)

GRIP INDUSTRIALBLACK SERIES CASTOR WHEELS

41976

WHEEL

55

www.navimportsaustralia.com.au

Grip Castors and Wheels RED SERIES WHEELS Red coloured, baked enamel finished 1 piece pressed steel core centred, quality flange style ball bearing, fitted rim with pneumatic rubber tubed tyre.

400MM ONE PIECE STEEL RIM PNEUMATIC WHEEL

GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS

WHEEL

Diameter (mm)

Axle Diameter/Type

MAX.* Load Cap.

Bearing

Tyre tread pattern

Tyre Size

52107

400

25mm steel centered

136

Ball Bearing

Turf

16 x 4.50 x 8

52110

400

25mm steel centered

200

Ball Bearing

Turf

16 x 6.50-8

52111

400

20mm centered

136

Ball Bearing

Turf

4.50 x 4-8

RED SERIES WHEELS Steel centred plastic core rim, quality flange style ball bearings and pneumatic rubber tubed tyre.

GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS

400MM PLASTIC RIM PNEUMATIC WHEEL

WHEEL

Diameter (mm)

Axle Diameter/ Type

MAX.* Load Cap.

Bearing

Tyre tread pattern

Tyre Size

52109

400

25mm steel centered

200

Ball Bearing

Turf

16 x 6.50-8

RED SERIES WHEELS Steel centred plastic core rim, quality flange style ball bearings and pneumatic rubber tubed tyre.

150MM STEEL RIM SEALED RUBBER WHEEL

GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS

WHEEL

Diameter (mm)

Axle Diameter/ Type

Bearing

Tyre tread pattern

Tyre Size

52097

150

1/2” steel centered

Flange Bearing

Diamond

2.50 - 4

320MM TWO PIECE STEEL RIM PNEUMATIC OFFSETWHEEL

GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS

WHEEL

Diameter (mm)

Axle Diameter/ Type

Bearing

Tyre tread pattern

Tyre Size

52099

320

1” steel centered

Ball Bearing

Turf

13 x 5.00-6

200MM TWO PIECE STEEL RIM PNEUMATIC WHEEL Axle Diameter/ Type

Bearing

Tyre tread pattern

Tyre Size

52100

200

5/8” centered

Ball Bearing

Turf

2.50 - 4

N D T HR E

K

DI

MO A

OB N

BY TH R E AD

F TH R E A UR

AD

AY THR E HW

D

HI

Diameter (mm)

AD

G

WHEEL

T

GRIP INDUSTRIAL RED SERIES REPLACEMENT WHEELS

* MAX. LOAD CAPACITY IS THE MAXIMUM LOAD THE WHEEL/CASTOR CAN HOLD IN A STATIC POSITION. TO EQUATE RECOMMENDED WORKING CAPACITY A 20% REDUCTION FROM THE MAXIMUM LOAD FIGURE IS REQUIRED. Sp* REFERS TO BOLT HOLE SPACING(mm). (R*) ROUND HOLE SIZE(mm) (S*) SLOTTED HOLE SIZE(mm)

56

www.navimportsaustralia.com.au

Grip Material Handling Equipment

HAND PALLET TRUCKS For the safe, efficient and stable lifting and maneuvering of heavy objects and materials, including pallets and skips in the warehouse, dock, building sites and general material handling areas.

PART NO.

Lifting Capacity

Fork Length

Lifting Height(mm)

51800

2500Kg

1150mm

51805

2000Kg

1150mm

PART NO.

FORK WHEELS

51800

Double

51805

Single

MIN.

MAX.

70

195

70

195

Width between Forks

Weight

380mm

65Kg

380mm

65Kg

150 & 300KG PLATFORM TROLLEY Heavy duty tubular steel platform trolleys folds flat for easy transportation and storage. Two heavy duty fixed castors and two swivel castors with ball bearings ensure a smooth roll.

PART NO.

Maximum Capacity

Dimensions

52003

150Kg

475mm(W) x 720mm(L)

52005

300Kg

870mm (W) x 590mm (L)

200 & 300KG PLATFORM HAND TROLLEY Deck is made from durable hardened plastic & and the ergonomically designed handle folds down for easy storage. Trolleys are mounted on 2 fixed & 2 swivel 125mm castors.

PART NO.

Maximum Weight

Height From Floor

Low Noise Castor

Deck Size

52004

200Kg

150mm

100mm

720 x 485mm

52006

300Kg

190mm

125mm

900 x 600mm

GD600 - TRAILER DOLLY The ideal solution for the easy movement of light weight trailers such as box, Jet Ski and a small boat.

PART NO.

Maximum Capacity

Packaged Weight

Low noise Castor

Overall Dimensions

GD600

270Kg

11.5Kg

100mm

1310mm x 680mm

57

www.navimportsaustralia.com.au

Grip Material Handling, Measuring & Engineering Equipment 500 & 150KG SCISSOR LIFT HYDRAULIC TABLE CARTS Rugged all steel cart features a foot operated hydraulic pedal.

Adjustable lowering speed control. Move heavy parts without straining your back.

PART NO.

Load Capacity

Table size

52011

500Kg

855 x 500mm

52013

150Kg

855 x 500mm

Lifting Height (mm)

Castors

MIN.

MAX.

340

900

MIN.

MAX.

340

900

Four 125mm castors, 2 locking swivel castors on rear.

Two stationary castors - 125mm Two locking swivel castors - 125mm

350KG DOUBLE SCISSOR LIFT HYDRAULIC TABLE CART Rugged all steel cart features a foot operated hydraulic pedal. Adjustable lowering speed control. Move heavy parts without straining your back.

PART NO.

Load Capacity

Table size

52015

350Kg

910x 500mm

Lifting Height (mm)

Castors

MIN.

MAX.

350

1300

Two stationary castors - 125mm Two locking swivel castors - 125mm

STAINLESS STEEL RULERS Heavy duty professional quality metric & imperial stainless steel rules have conversion table on the back.

29475 29477, 29480

PART NO.

Weight

Size

29475

55g

300mm

29477

150g

1000mm

29480

350g

600mm

HD COMBINATION SQUARE 300mm Professional quality. Satin chrome finished ruler. Baked enamel finished protractor. Leveled square head. Use as centre head, outside try square, depth gauge, scriber, 90 degree & 45 degree level, inside try square and meter.

PART NO.

Weight

Size

Specifications:

30184

400g

300mm

Markings for inches, centimetres & millimeters.

STAINLESS STEEL PROTRACTOR 150mm Professional quality. Satin chrome finished ruler. Baked enamel finished protractor. Leveled square head. Use as centre head, outside try square, depth gauge, scriber, 90 degree & 45 degree level, inside try square and meter.

58

PART NO.

Weight

Size

59160

140g

150mm

www.navimportsaustralia.com.au

Grip Cutting Measuring & Engineering 6 PIECE TELESCOPIC INSIDE MEASURING GAUGE SET Used in engineering machine shops and engine building processes in conjunction with micrometres to accurately measure inside holes or bores from small to large diameters. Can also be used to help diagnose “out of roundness “of bores.

PART NO.

59140

Features:

Specifications:

• Stainless satin hardened chrome plated steel construction • Knurled handles for secure grip • Uniform spring tension, self-cantering plungers for accurate readings • Contact point precision ground and hardened • Supplied in soft plastic pouch to prevent corrosion damage and provide safe storage when not in use

• Overall measurement range: 8 - 150mm • (6 pieces) 8-12.7mm, 12.7 - 19mm, 19 - 32mm, 32-54mm, 54-90mm, 90 -150mm

8 PIECE DOUBLE CUT ROTARY BURR SET Manufactured from precision ground, heat treated carbide steel. Cutting surfaces are double cut for efficient stock removal on both soft and hard materials. Convenient 8 piece set with 4 different shapes, 2 sizes of each, presented in a handy blow moulded storage case.

PART NO.

86470

Weight

Specifications: • Shank size(all burrs): 1/4" diameter • Contents(8 piece set): 2 x ball shape • (1 x 1/4" diameter and 1 x 3/8" diameter) • 2 x cylindrical shape (1 x 1/2" x 1" and 1 x 3/8" x 3/4") • 2 x tree shape radius end (1 x 3/8" x 3/4" and 1 x 1/2" x 1") • 2 x cylindrical ball nose • (1 x 3/8" x 3/4" and 1 x 1/4" x 5/8")

324g

4 PC LONG REACH DOUBLE CARBIDE BURR SET 1pc cylindrical shape 3/8" X 3/4". 1pc ball shape 3/8". 2 x tree shaped radius ends 3/8", 3/4" shank size: 1/4" PART NO.

Weight

35116

120g

Specifications: • 1pc cylindrical shape 3/8" X 3/4".

• 1pc ball shape 3/8". 2 x tree shaped radius ends • 3/8", 3/4" shank size: 1/4"

5 PIECE IMPERIAL REDUCED SHANK DRILL BIT SET Industrial dark blue finished, HSS reduced shank drill set for multipurpose use by engineering shops or the serious home handyman alike.

PART NO.

Features:

Specifications:

35295

• Manufactured from high speed steel with dark blue industrial finish • Reduced 1/2" shank throughout size range • Most effective if used at low drill speeds • Single spiral flute for effective stock removal • Wooden, foam lined, double hinged storage box included

• Overall dimensions (L xWxH) 180 × 160 × 40mm • Individual sizes: 9/16”, 5/8”, 3/4”, 7/8” & 1" • Weight(nett): 1.5 kg

59

www.navimportsaustralia.com.au

Grip Cutting Measuring & Engineering 10 PIECE METRIC MORSE TAPER 2 DRILL BIT SET Industrial dark blue finished, HSS Morse taper number 2 shank drill set for multipurpose use by engineering shops or the serious home handyman alike.

PART NO.

Features:

Specifications:

35300

• Manufactured from high speed steel with dark blue industrial finish • Morse taper number 2 shank fitting throughout size range • Single spiral flute for effective stock removal • Most effective if used at low drill speeds • Wooden, foam lined, double hinged storage box included

• Overall dimensions: • (L x W x H) 310×280×40 mm • Individual sizes: 14.5, 15, 16, 17, 18, 19, 20, 21, 22 & 23 mm • Weight(nett): 3.8 kg

3 PC METRIC STEP DRILL SET Grip step drills have multipurpose use. Designed for drilling and deburring repetitive holes in aluminium, brass, and copper, steel, plastic, plexiglass, laminates and many other thin materials. Used by sheet metal workers, auto mechanics, electricians and serious home handyman.

PART NO.

Features:

Specifications:

35324

• Manufactured from drop-forged high speed steel with a titanium coating • 1/4"hex, quick change, impact grade shank for fitment to multiple use chucks or drill presses • Straight cut 2 flute design for fast and smooth cuts with efficient stock removal • Size depth graduations marked in flutes • Aluminium, hinged, foam filled storage case included

• Drill sizes: 4 - 12 mm, 4 - 20 mm, 4 - 32 mm, 2mm increments, 2mm increments, 2mm increments • Shank sizes:(all) 1/4" hex, quick change, impact grade • Weight(nett) including case: 160g

3 PIECE METRIC SPIRAL FLUTE STEP DRILL SET Grip step drills have multipurpose use. Designed for drilling and deburring repetitive holes in aluminium, brass, and copper, steel, plastic,plexiglass, laminates and many other thin materials. Used by sheet metal workers, auto mechanics, electricians and serious home handyman.

PART NO.

Features:

35325

• Manufactured from fully polished drop forged high speed steel, heat treated for durability • Precision ground round shanks in 6, 8 and 10mm diameters • Single spiral flute design for fast, efficient stock removal • Size depth graduations marked in flutes • Quality pressed metal storage case included

Specifications: • Drill sizes: 2 - 12mm (2mm increments); 4 - 20mm(2mm increments); 4 - 30mm(2mm increments) • Shank sizes: 6mm (round), 8mm (round), 10mm (round) • Weight (nett) including case: 160g

15 PC BI METAL HOLE SAW KIT Manufactured from hardened steel with cutting edge weld to a tough alloy steel body. Can be used to cut circular holes in steel, brass, cast iron, aluminium, wood and plastic. Convenient blow mold case.

60

PART NO.

Weight

42044

1.9Kg

Size Size: 19, 22, 25, 32, 35, 38, 44, 51, 57, 64 and 76mm.

www.navimportsaustralia.com.au

Grip Cutting Measuring & Engineering 131 PC METRIC THREAD AND HELICOIL REPAIR KIT PART NO.

53200

Features:

Specifications:

• Ideal for repairing damaged or stripped internal threads.

• Protects tapped threads against wear and damage.

• Includes drill bits, thread taps, insert installations and lug breaking tools

• 5 Installation Tools, 5 Break Pin Tools, 5 Twist Drills, 1 Hex Key, 5 Taps and 110 Wire Thread Inserts • M5x0.8x6.7mm • M6x1.0x10.8mm • M8x1.25x10.8mm • M10x1.5x13.5mm • M12x1.75x16.3mm

25 PC METRIC THREAD AND HELICOIL REPAIR KIT PART NO.

53205

53210

53215

Features:

Specifications:

• Ideal for repairingdamaged or stripped internal threads.

• Protects tapped threads against wear and damage.

• Includes drill bits, thread taps, insert installations and lug breaking tools

• 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M5x0.8x6.7mm • 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M6x1.0x10.8mm • 1 Installation Tool, 1 Break Pin Tool, 1 Twist Drill, 1 Hex Key, 1 Tap and 20 Wire Thread Inserts • Sizes: M8x1.25x10.8mm

40PC TUNGSTEN STEEL TAP & DIE SET METRIC Heavy duty heat treated alloy steel construction and rust-resistant satin finish.

Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.

Specifications:

53260

• Consists of national coarse, national fine & pipe combination thread.

• Contains one Tap & Die in the following sizes - 3x0.5, 3x0.6, 4x0.7, 4x0.75, 5x0.8, 5x0.9, 6x1.0, 6x0.75, 7x1.0, 7x0.75, 8x1.25, 8x1.0, 10x1.25, 10x1.5, 12x1.75, 12x1.5, 1/8 pt.

• Includes long handle adjustable tap wrench, Die handle, T type handle tap wrench, Flat screwdriver & screw pitch gauge.

• Comes in black metal case.

53262

• Consists of national coarse, national fine & pipe combination thread.

• Contains one Tap & Die in the following sizes - 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4-20, 1/4-28, 5/16-18, 5/16-24, 3/8-16, 3/8-24, 7/16-14, 7/16-20, 1/2-13, 1/2-20,1/8 NPT-27 • Includes long handle adjustable tap wrench, Die handle, T type handle tap wrench, Flat screwdriver & screw pitch gauge.

• Comes in black metal case.

45PC TUNGSTEN STEEL TAP & DIE SET METRIC/SAE Heavy duty heat treated alloy steel construction and rust-resistant satin finish.

Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.

Specifications:

53280

• Contains one Tap & Die in each of the following sizes - 1-1/2" OD, 6x1.0, 6x0.75, 8x1.25, 8x1.0, 10x1.5, 10x1.25, 12x1.75, 12x1.5, 14x2.0, 14x1.5, 16x2.0, 16x1.5, 18x2.5, 18x1.5, 2" OD, 20x2.5, 20x1.5, 22x2.5, 22x1.5, 24x3.0, 24x1.5.

• Includes 2 tap wrenches 3-12.5mm & 6-25mm.

• 2x50mm diameter die stock with 38mm adaptor & 3mm mini flat screwdriver.

• Comes in black metal case.

PART NO.

53300

Specifications: • Contains one Tap & Die in each of the following sizes - 10UNF 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" • 10UNC 1/4", 5/16", 3/8", 7/16", 1/2", 9/16", 5/8", 3/4", 7/8", 1" • Includes 2 tap wrenches, 2" Die handle OD with Adaptor, screwdriver.

• Comes in black metal case.

61

www.navimportsaustralia.com.au

Grip Cutting Measuring & Engineering 110PC TAP & DIE SET Heavy duty heat treated alloy steel construction and rust-resistant satin finish.

Precision machined to exacting standards. Rockwell hardness of 58-61 HRC. PART NO.

53302

Specifications: • UNC mm: 4x40 - 12x24TPI • UNC SAE: 1/4"x20-3/4"x16TPI • UNF mm: 10 x 32TPI • UNF SAE: 1/4"x28-3/4"x16TPI • UNS: 1/4" x 24 & 1/4" x 40TPI • Metric: 6 x 1.0 - 18 x 1.5 • Pitch NPT: 1/8" x 27 & 1/4" x 18TPI • 2 tap wrench, 1 T type tap wrench and 2 die handles.

1" IMPERIAL & 0-25MM METRIC DIAL INDICATOR Used in precision engineering machine shops and engine building processes for accurate measurements of deck clearances , straightness of shafts ,run out or other measurements that involve distances between two surfaces or small amounts of component travel . Can be easily mounted on a magnetic base accessory (GRIP Part No 59120) for a more ergonomic operation with greater accuracy.

PART NO.

Specifications:

59100

• Bezel diameter: 58mm • Measurement range: 0 - 1" • Increments of measurement: .0001

59101

• Bezel diameter: 58mm • Measurement range: 0 - 25mm • Increments of measurement: 0.01mm

ADJUSTABLE DIAL INDICATOR MAGNETIC BASE Used for the mounting of a dial indicator so accurate measurements of deck clearances, straightness of shafts, run out or any other measurements that involve distances between two surfaces or small amounts of component travel can be more ergonomically taken.

PART NO.

59120

Features:

Specifications:

• Non-marring magnetic base with on/off release • Strong magnet with 60kg holding capacity • Main clamp pole 3/8" diameter for stability • Thumb screw adjustable arms allow precision measurements in any position

• Magnet; commercial grade with on/off release 60kg holding capacity • Main clamp upright pole diameter; 3/8" (9.5mm)

0-25MM METRIC EXTERNAL MICROMETRE SCREW GAUGE Used for the precise measurement of components or thicknesses between two faces with metric analogue scale and a measuring range of 0 - 25mm.

PART NO.

59080

Specifications: • Measurement range; 0-25mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included

25-50MM METRIC EXTERNAL MICROMETRE SCREW GAUGE Used for the precise measurement of components or thicknesses between two faces with metric analogue scale and a measuring range of 0 - 25mm.

PART NO.

59081

62

Specifications: • Measurement range; 25-50mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included

www.navimportsaustralia.com.au

Grip Cutting Measuring & Engineering 4 PC(0-100MM) METRIC MICROMETRE SCREW GAUGE SET Used for the precise measurement of components or thicknesses between two faces. 4 piece set with metric analogue scales and a measuring range of 0 - 100mm.

150MM & 200MM DIGITAL VERNIER CALIPER Used for a wide variety of accurate, precision measuring applications.

PART NO.

Features:

Specifications:

59085

• Satin finish with black micro fine graduations (0.01mm) • Hammer tone finished cast frames • Knurled finger thimble ratchet stop adjustment • One handed operation with thumb lock lever • Hardened carbide measuring faces • Supplied in wooden, hinged lid case with EVA foam tray to prevent corrosion damage and provide safe storage when not in use

• Measurement ranges (4 piece); 0-25mm, 25-50mm, 50 - 75mm, and 75 - 100mm • Measurement face size; 6.5mm, flatness 0.0008mm • Calibrating adjustment spanner and precision thickness wedges included

PART NO.

Features:

Specifications:

• Quality hardened stainless steel manufacture with satin finish • Micro fine black graduations and battery powered high resolution display screen • Sliding surfaces are raised to prevent defacement wear of graduations • Measurement faces are precision ground and lapped for extreme accuracy • 4 -way jaws provide outside, inside, depth and step measurements • Supplied in hard cover plastic case to prevent corrosion damage and provide safe storage when not in use

• Length / range: • 0 - 150mm (6") • Push button display: on/off/Zero/Metric/inch • Resolution: 0.01mm / 0.0005" • Battery: Supplied

59020

59021

6"/150MM VERNIER CALIPER Used for a wide variety of accurate, precision measuring applications.

Can be read in both inch and metric scales.

PART NO.

59023

8"/200MM VERNIER CALIPER WITH FINE ADJUSTMENT Used for a wide variety of accurate, precision measuring applications.

Can be read in both inch and metric scales.

PART NO.

59024

59025

300MM DIAL VERNIER CALIPER METRIC Used for a wide variety of accurate, precision measuring applications.

• Length/range: 0 - 200mm (8 “) • Push button: on/off/ Zero/Metric/inch • Resolution: 0.01mm/0.0005" • Battery: Supplied

Features: • Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measurement faces are ground and lapped for extreme accuracy • 4 - Way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Supplied in plastic case to prevent corrosion damage and provide safe storage when not being used

Features: • Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measuring faces are ground and lapped for extreme accuracy • 4 - way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Fine adjustment mechanism • Supplied in plastic case to prevent corrosion damage and provide safe storage

Specifications:

• Length: 0 - 150mm (6") • Reading: 0.05mm + 1/128 in

Specifications:

• Length: 0 - 200mm (8”) • Reading: 0.05mm + 1/128in

• Length: 0 - 300mm (12”) • Reading: 0.05mm + 1/128in

PART NO.

Features:

Specifications:

59060

• Quality hardened stainless steel manufacture • Satin finish with micro fine black graduations for easy, precise reading • Measuring faces are ground and lapped for extreme accuracy • 4 - way jaws provide outside, inside, depth and step measurements • Sliding surfaces are raised to prevent defacement wear of graduations • Fine adjustment mechanism • Supplied in plastic case to prevent corrosion damage and provide safe storage • Shock proof

• Length: 0 - 300mm • Reading: 0.01mm Increments on Dial and 1.0mm on Vernier Body

63

www.navimportsaustralia.com.au INDEX - LIST OF ITEMS Item No:

Page No:

IN0001 4 IN0002 4 IN0003 4 IN0103 4 IN0101 4 IN0102 4 IN0035 4 IN0037 4 IN0038 4 IN0039 4 IN0041 4 IN0043 4 IN0045 4 IN0048 4 IN0140 4 IN0141 4 IN0142 4 IN0143 4 IN0144 4 IN0145 4 IN0146 4 IN0147 4 IN0011 5 IN0012 5 IN0013 5 IN0014 5 IN0015 5 IN0016 5 IN0017 5 IN0018 5 IN0019 5 IN0020 5 IN0021 5 IN0022 5 IN0023 5 IN0024 5 IN0025 5 IN0026 5 IN0027 5 IN0028 5 IN0029 5 IN0030 5 IN0031 5 IN0032 5 IN0033 5 IN0034 5 IN0035 5 IN0111 5 IN0112 5 IN0113 5 IN0114 5 IN0115 5 IN0116 5 IN0117 5 IN0118 5 IN0119 5 IN0120 5 IN0121 5 IN0122 5 IN0123 5 IN0124 5 IN0125 5

64

Item No: Page No: IN0126 5 IN0127 5 IN0128 5 IN0129 5 IN0130 5 IN0131 5 IN0132 5 IN0133 5 IN0134 5 IN0135 5 IN0136 5 IN0137 5 IN0138 5 IN0139 5 IN0065 6 IN0066 6 IN0067 6 IN0068 6 IN0069 6 IN0201 6 IN0202 6 IN0203 6 IN0204 6 IN0205 6 IN0207 6 IN0208 6 IN0209 6 IN0210 6 IN0211 6 IN0212 6 IN0070 6 IN0071 6 IN0072 6 IN0073 6 IN0074 6 IN0075 6 IN0076 6 IN0077 6 IN0078 6 IN0079 6 IN0080 6 IN0081 6 IN0082 6 IN0083 6 IN0084 6 IN0085 6 IN0213 6 IN0214 6 IN0215 6 IN0216 6 IN0217 6 IN0218 6 IN0219 6 IN0220 6 IN0221 6 IN0222 6 IN0223 6 IN0224 6 IN0225 6 IN0226 6 IN0227 6 IN0402 7

Item No:

Page No:

IN0403 7 IN0404 7 IN0405 7 IN0406 7 IN0407 7 IN0408 7 IN0409 7 IN0410 7 IN0411 7 IN0412 7 IN0413 7 IN0414 7 IN0415 7 IN0416 7 IN0417 7 IN0418 7 IN0419 7 IN0420 7 IN0421 7 IN0422 7 IN0423 7 IN0424 7 MTLT710 7 MTLT912 7 IN0004 8 GEM20 8 IN0063 8 IN-12 8 INBMHS14 9 INBMHS16 9 INBMHS17 9 INBMHS19 9 INBMHS20 9 INBMHS21 9 INBMHS22 9 INBMHS24 9 INBMHS25 9 INBMHS27 9 INBMHS29 9 INBMHS30 9 INBMHS32 9 INBMHS33 9 INBMHS35 9 INBMHS37 9 INBMHS38 9 INBMHS40 9 INBMHS41 9 INBMHS43 9 INBMHS44 9 INBMHS46 9 INBMHS48 9 INBMHS51 9 INBMHS52 9 INBMHS54 9 INBMHS57 9 INBMHS59 9 INBMHS60 9 INBMHS64 9 INBMHS65 9 INBMHS67 9 INBMHS68 9 INBMHS70 9

www.navimportsaustralia.com.au

INDEX - LIST OF ITEMS Item No: Page No: INBMHS73 9 INBMHS76 9 INBMHS79 9 INBMHS83 9 INBMHS86 9 INBMHS89 9 INBMHS92 9 INBMHS95 9 INBMHS98 9 INBMHS102 9 INBMHS105 9 INBMHS108 9 INBMHS111 9 INBMHS114 9 INBMHS121 9 INBMHS127 9 INBMHS140 9 INBMHS146 9 INBMHS152 9 INAR1430 9 INAR32200 9 IN-1250 10 IN-1450 10 IN-1650 10 IN-1850 10 IN-2050 10 IN-2250 10 IN-2450 10 IN-2525 10 IN-2550 10 IN-2650 10 IN-2850 10 IN-3050 10 IN-3225 10 IN-3250 10 IN-3350 10 IN-3450 10 IN-3650 10 IN-3850 10 IN-4050 10 BOH-32 10 BOH-42 10 IN-1225 10 IN-1425 10 IN-1625 10 IN-1825 10 IN-2025 10 IN-2225 10 IN-2425 10 IN-2525 10 IN-2625 10 IN-2825 10 IN-3025 10 IN-3225 10 IN-3325 10 IN-3425 10 BOH-071925 10 IN-635103 10 IN-63577 10 INSA-2 11 INSA-3 11 INSA-5 11

Item No: Page No: INSB-3 11 INSB-5 11 INSC-2 11 INSC-3 11 INSC-5 11 INSD-2 11 INSD-3 11 INSD-5 11 INSE-3 11 INSF-3 11 INSF-5 11 INPH2150 12 INPH2251 12 INSG-3 12 INSH-2 12 INSH-5 12 INSL-3 12 INSM-3 12 INSN-1 12 INPH2505 12 INSD-03 13 INSD4-12 13 INSD4-20 13 INSD4-32 13 INSTCS1 13 INSTCS06 13 INSTCS08 13 INSTCS10 13 INSTCS12 13 INSTCS16 13 INSTCS20 13 INSP10160 14 INSP10210 14 INSP12160 14 INSP12210 14 INSP14260 14 INSP16260 14 INSP18260 14 INSP20260 14 INSP5110 14 INSP5160 14 INSP55110 14 INSP6160 14 INSP65160 14 INSP65210 14 INSP8160 14 INSP8210 14 INSM16400 14 INSM16600 14 INSM18400 14 INSM18600 14 INSM20400 14 INSM20600 14 INSM22400 14 INSM22600 14 INSM25400 14 INSM25600 14 INSM28400 14 INSM28600 14 IN4120 15 IN5120 15 IN5125 16

Item No: Page No: IN5132 16 INJO113 16 INJO116 16 INMS2B16 17 INMS2B18 17 INMS2JT2 17 INMS2JT3 17 INMS2JT6 17 INMS3B16 17 INMS3B18 17 INMS3JT3 17 INMS3JT4 17 INMS3JT6 17 INR2x1 17 INR3x2 17 INR4x2 17 INR4x3 17 INMT2 17 GMT2 17 PFS-75 18 PFE-45 18 PFB-75 18 PVF300 18 PVF400 18 PVF500 18 PVF600 18 PBR1012 18 PBR1016 18 PBR1020 18 PBR1024 18 MTBRS305 19 MTBRS760 19 MTBRS1016 19 MTFS1320 19 MTPB1270E 19 MTPB1220 20 MTPB610 20 MTPB1295 20 81140 20 81150 21 MTSP610 21 MTSP1050 21 MTSP1270 21 81200 22 81210 22 81220 22 81120 22 MTUB-100 23 MTUB-100A 23 MTTB22 23 MTBS115 24 MTBS181 24 MTBS8S 24 MTRSF52 25 MTRST607 25 MTRSV52 25 MTRST604 25 MTPLASCUT40 26 MTVO140 26 MTVO180 26 MTMIG140 27 MTMIG180 27

65

www.navimportsaustralia.com.au INDEX - LIST OF ITEMS

Item No: Page No: 85080 28 85100 28 85120 28 85245 28 85240 28 85238 28 85171 28 85167 28 MTBG625L 29 MTBG825L 29 MTDS300 29 MTWS250 30 15100 31 15115 31 15350 31 15420 32 15990 32 MTSBC880 33 MTSBH1 33 15009 34 15020 34 15025 34 15005 34 MTSB07G 35 MTSB01 35 10460 36 10462 36 10464 36 10466 36 10469 36 10470 36 10471 36 10472 36 10530 37 10520 37 15020PAD 37 10542 37 10535 37 15000 38 15003 38 15001 38 15002 38 15025#33 39 15025#8 39 15100A 39 15100G 39 15025#9 39 15025#7 39 15100F 39 15350G 39 15100G 40 15420H 40 15350FP 40 15350G 40 15100W 40 15115W 40 15990W 40 15420W 40 15420V 40 41948 41 41952 41 41948 41

66

Item No: Page No: 41952 41 41949 41 41953 41 41949 41 41953 41 41950 41 41954 41 41950 41 41954 41 41961 42 41966 42 41961 42 41966 42 41963 42 41967 42 41963 42 41967 42 41964 42 41968 42 41964 42 41968 42 43022 42 43032 42 43021 43 43029 43 43037 43 43016 43 43039 43 43041 43 43036 43 43033 43 43038 43 43040 43 43035 43 43034 43 43039A 43 52160 43 52161 43 52162 43 52163 43 42091 44 42094 44 42097 44 42092 44 42095 44 42098 44 42093 44 42096 44 42099 44 42087 44 42089 44 42088 44 42090 44 41994 45 41997 45 41995 45 41998 45 41996 45 41999 45 41988 45 41991 45 41989 45

Item No: Page No: 41992 45 41990 46 41993 46 52164 46 52165 46 52169 46 52170 46 41978 47 41983 47 41979 47 41984 47 41980 47 41985 47 41981 47 41986 47 41982 47 41987 47 52050 48 52051 48 52052 48 52053 48 43001 48 43005 48 42063 48 42067 48 43002 48 43004 48 42062 48 42068 48 43003 48 43006 48 42064 48 42069 48 52173 48 52174 48 42078 49 42081 49 42084 49 42079 49 42082 49 42085 49 42080 49 42083 49 42086 49 43017 49 43024 49 43025A 49 43027 49 43031 49 43015 50 43023 50 43025B 50 43026 50 43030 50 43018 50 43025 50 43025C 50 43028 50 42054 50 43010 50 42072 51 42074 51

www.navimportsaustralia.com.au

INDEX - LIST OF ITEMS Item No: Page No: 42076 51 42073 51 42075 51 42077 51 43051 51 43054 51 43057 51 43052 51 43055 51 43058 51 43053 51 43056 51 43059 51 42000 52 42004 52 42008 52 42012 52 42001 52 42005 52 42009 52 42013 52 42002 52 42006 52 42010 52 42014 52 42003 52 42007 52 42011 52 42015 52 42055 52 42056 53 42058 53 42057 53 42059 53 43007 53 43011 53 43008 53 43012 53 52102 54 52108 54 52101 54 52106 54 52103 54 52105 54 52104 54 42070 55 42071 55 41976 55 41977 55 52107 55 52110 55 52111 55 52109 55 52120 55 52121 55 52097 56 52099 56 52100 56 51800 57 51805 57 52003 57 52004 57

Item No: Page No: 52005 57 52006 57 GD600 57 52011 58 52013 58 52015 58 29475 58 29477 58 29480 58 30184 58 59160 58 59140 59 86470 59 35116 59 35295 59 35300 60 35324 60 35325 60 42044 60 53200 61 53205 61 53210 61 53215 61 53260 61 53262 61 53280 61 53300 61 53302 62 59100 62 59101 62 59120 62 59080 62 59081 62 59085 63 59020 63 59021 63 59023 63 59024 63 59025 63 59060 63

67

NAV Imports Australia Pty Ltd

METALTECH

NAV Imports Australia Pty Ltd 5-6 Ormsby Place, Wetherill Park NSW 2164 P: (02) 9757 1751 | F: (02) 9757 1757 W: www.navimportsaustralia.com.au

Designed by NAV IMPORTS © Australia 2017