Advantages Of CNC Machining

Downloaded from: justpaste.it/48yo2

Advantages Of CNC Machining Anyone looking to have something manufactured has several different options. They can choose to have it laser cut, hand made, punched or machined. In fact it is CNC machining London that provides the best option for anyone looking for very accurate and high quality components. In this article we will look at the reasons why you should use CNC machinery.

Highly Accurate Most CNC methods of production work in two ways. The most popular method of manufacturing these days is either using a CNC punch profiler, or a CNC laser cutter. Both of these will cut components out of a flat sheet of metal. This allows you to create accurate components, however you have no control over the thickness of the sheet.

The thickness of the sheet can vary over the whole sheet. This can make it difficult to cut exactly the same component, even if you are cutting it from the same sheet. CNC machining centres can be used to machine a part out of a solid block of metal. This allows all of the dimensions of the product to made to accurate specifications.

Combining Laser Cutting with Machining The only problem with CNC machining is that it can be quite expensive. This is because there is a lot of wasted excess materials when a component has to be cut out of a block or bar of

metal. A cheaper alternative would be to get the component laser cut. The component could be cut a few millimetres larger than required and then the machine tool could be run around the outside of the profile to make sure it is within the required measurements. Having a component cut out of 12mm sheet steel and then reducing it to 10mm with a machining centre is simple and will create an accurate component cheaper than cutting it all using machining.

Most manufacturers will utilise both laser cutting and machining together to reduce costs and improve efficiency.

High Quality CNC machining is an extremely important in creating high quality finishes. There won't be any distortion caused by excess heat in the process of cutting the product.This method of production will also leave a perfectly clean edge without burrs or damage to the product.

Anyone interested in purchasing high quality and accurate components should consider machining as their manufacturing option of choice. This is perfect for producing cogs and gears which mesh together, or highly accurate components for the medical industry.

Swordfish Works are laser cutting London specialists based in Hoxton, offering full laser cutting, CNC machining, CNC routing, knife cutting services from our workshop in Shoreditch, East London. We work with sophisticated laser cutting equipment, cutting & engraving plastic, wood, leather, acrylic & much more.

Original Source: Advantages Of CNC Machining London