RETICLE GUIDE
INTRO TO SFP
A second focal plane (SFP) scope means the reticle is placed behind the magnification lens. The advantage of a SFP optic is the reticle always remains the same size as you shift through magnification. When shooting with this SFP scope, be aware that the listed reticle subtensions used for estimating range and holdover are only accurate at the highest magnification.
GUERRILLA DOT BDC
The Guerilla Dot BDC is versatile across multiple platforms, calibers, and situations. Delivering fast and accurate target acquisitions with the near 1x view, while also presenting various holdovers for mid-range engagements.
Designed for the AR platform utilizing 5.56 NATO trajectory.
Based on the following ballistics parameters:
•Lake City/Federal 5.56 NATO
•55gr FMJ/CM193
•Ballistic Coefficient: .243
•Muzzle Velocity: 3,101
•Barrel Length: 16”
The Guerilla Dot BDC also includes holdovers for 7.62X51/.308 Win.
Based on the following ballistics parameters:
• Hornady .308 Win 155gr
• Ballistic Coefficient: .435
• Muzzle Velocity: 2,865 fps
5.56 NATO 55GR FMJ; BASED ON 50/200 YARD ZERO
Bullet drop subtensions are designed to work with the optic at the highest magnification. The center dot and its corresponding zeros can be used at any magnification.
BULLET DROP COMPENSATION
.308 WIN/7.62X51 155GR; BASED ON 50/200 YARD ZERO
Bullet drop subtensions are designed to work with the optic at the highest magnification. The center dot and its corresponding zeros can be used at any magnification.
2 MOA Center Dot/50-100 YDS
A
Outside Diameter 23 MOA
B
Inside Diameter 19 MOA
9.5 MOA1 MOA Center Dot/50-100 YDS
A
Outside Diameter 23 MOA
B
Inside Diameter 19 MOA
9.5 MOARAPID RANGING
The Guerrilla Dot BDC can be used to estimate distance to target based upon various reference points.
BFO RETICLE
Based on Minute of Angle (MOA) subtensions, the BFO (Bright Fiber Optic) is calibrated using angular measurements that are derived from degrees and minutes. These angular measurements are then used to estimate range and correct bullet drop in riflescopes, with 1 MOA corresponding to 1.05" for every 100 yards, or 29.1mm.
0.9 MOA Center Dot/50 -100 YDS
2.5 MOA
1.1 MOA Line
50 MOA
5 MOA INCREMENTS
4 MOA
2 MOA
5 MOA
30 MOA
20 MOA
0.6 MOA Center Dot/50 -100 YDS
2.5 MOA
0.8 MOA Line
50 MOA
5 MOA INCREMENTS
3 MOA
2 MOA
5 MOA
30 MOA
20 MOA
MOA RANGING
Ranging with MOA is very easy and effective by simply knowing the size of the target in inches. If you cannot determine the size of the target, use a nearby object.
Target Size (inches) x 95.5 = Range (Yards)
Measured MOAs
Target Size (cm) x 34.38 = Range (Meters)
Measured MOAs
RANGING EXAMPLES
To range with the BFO reticle, simply use the 5 MOA markings on windage or elevation to size the target.