Page 1

SVECOM PRODUCTS FOR TISSUE AND PAPER Products presentation


SVECOM-PE PRODUCTS FOR THE TISSUE AND PAPER INDUSTRY MULTIPLE BLADDER PNEUMATIC EXPANSION SHAFT NON EXPANDING SHAFTS HANDLING EQUIPMENT


MULTIPLE BLADDER PNEUMATIC EXPANSION SHAFT


THE 640/PQL PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT


THE 640/PQL PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT The PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT Model 640/PQL from SVECOM is the air shaft preferred by machine manufacturers for winding of jumbo rolls of tissue and paper. There is no need for the dozens or even hundreds of heavy and expensive reel spools presently used to wind, store, or transport the rolls. Only 3 or 4 640/PQL shafts are needed to run non-stop.


THE 640/PQL PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT

The 640/PQL model is supplied complete with bearing housings and coupling ends, can be built with any diameter and length.


THE 640/PQL PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT The 640/PQL Pneumatic Multiple Bladder Shaft with independent valves is the TISSUE and PAPER Industry standard. OEMs (Original Equipment Manufacturers) that supply machines to this market as well as the leading tissue manufacturers are all using SVECOM Series 640/PQL Expanding Shafts in conjunction with our Handling Systems.


THE 640/PQL PNEUMATIC MULTIPLE BLADDER EXPANDING REEL SPOOL SHAFT All expanding shafts are always balanced to the most critical tolerances for minimal machine vibration, allowing the fastest winding speeds possible..

Less vibration and higher speed mean budget savings with increased production, a higher quality product with fewer web breaks, and less wear on the machine


6 GOOD REASONS TO USE OUR MULTIPLE BLADDER SHAFT IN YOUR LINE 1.

No vibration at highest speed , Pneumatic Multiple Bladder Shafts with centring ledges have the ability to centre the core on the diameter before gripping it.

2.

All expanders have spring clips and the durable urethane rubber bladders.

3.

Each bladder has its own Internal Check Valve for guaranteed expansion. If one bladder fails, the rest remain inflated.

4.

If one bladder leaks it is easy to locate and to repair in 10-15 minutes: what you need is only a set of hex wrenches, scissors and the spare part kit.

5.

The shaft has three air ports on the body: • The first one is used to first inflate the centring ledges; • A second one is used to inflate the rubber gripping ledges • The third valve is used to deflate all of the ledges at once (cost effective single valve design is available on request)

6.

All shafts are dynamically balanced up to Grade G-1.6.


NON EXPANDING SHAFTS


NON EXPANDING SHAFTS


CRHOME PLATED AND GRINDED CYLINDER


RUBBER COVERED ROLLERS


SPECIAL CONSTRUCTION ROLLERS


HANDLING EQUIPMENT


HANDLING SYSTEM MODELS

MOD. 50 MOD. 100 MOD. 190 MOD. 200 MOD. 250 MOD. 260 MOD. 400 MOD. 440 HYDRAULIC ELEVATOR TILTING BASE


SHAFT PULLER MOD. 50 SIMPLE DESIGN MANUAL CORE HANDLING


SHAFT PULLER MOD. 100 SIMPLE DESIGN MANUAL CORE HANDLING


SHAFT PULLER MOD. 100 WITH TABLE

SHAFT PULLER MOD. 100 WITH TABLE AND FANCES INSTALLED


SHAFT PULLER MOD. 100 FULL OPTIONALS DESIGN AUTOMATIC CORE HANDLING AND AUTOMATIC INFLATION/DEFLATION CORES - 3” – 6 “


SHAFT PULLER MOD. 100 FULL OPTIONALS DESIGN AUTOMATIC INFLATION/DEFLATION

AUTOMATIC CORE HANDLING - 3” – 6 “ – 12” -


SHAFT PULLER MOD. 100 FULL OPTIONALS DESIGN AUTOMATIC INFLATION/DEFLATION

AUTOMATIC CORE HANDLING - 3” – 6 “ – 16”-


SHAFT PULLER MOD. 190 MANUAL CORE HANDLING WITH TROLLEY AND WRAPPING LINE IN FRONT OF A TISSUE MACHINE AND CONNECTED TO THREE REWINDERS AND A CONVERTING LINE


BETWEEN SLITTER REWINDER AND TISSUE MACHINE IN CONNECTION WITH A CONVERTING LINE


SHAFT PULLER MANUAL CORE HANDLING MOD. 200

• Start winding in paper core without modify your P/T machine ! •The most sold model • Easy maintenance • Fast installation • One plug connection • Power control and hydraulic power on board • Can be placed everywhere


BESIDE A WALL BETWEEN MACHINES


BETWEEN TISSUE MACHINE AND SLITTER REWINDER


BEFORE INSTALLATION


AFTER INSTALLATION

• Start winding in paper core without modify your P/T machine! •The most sold model • Easy maintenance • Fast installation • One plug connection • Power control and hydraulic power on board • Can be placed everywhere


SHAFT PULLER SIMPLE DESIGN MANUAL CORE HANDLING MOD. 250


SHAFT PULLER SIMPLE DESIGN MANUAL CORE HANDLING MOD. 260


SHAFT PULLER SIMPLE DESIGN MANUAL CORE HANDLING MOD. 260


SHAFT PULLER SIMPLE DESIGN MANUAL CORE HANDLING MOD. 400

• Shaft puller • Aut. inflation/deflation • Hydraulic elevator • Tilting table • Power control cab. • Control panel


SHAFT PULLER MOD. 400 WITH TABLE

SHAFT PULLER MOD. 400 WITH TABLE AND INSTALLED FENCES


SHAFT PULLER FULL OPTIONAL DESIGN AUTOMATIC CORE HANDLING AND AUTOMATIC INFLATION/DEFLATION MOD. 400

• Shaft puller • Aut. Inflation/deflation • Core pusher • Core magazine • Hydraulic elevator • Tilting table • Power control cab. • Control panel • Hydraulic unit


SHAFT PULLER FULL OPTIONAL DESIGN AUTOMATIC CORE HANDLING AND AUTOMATIC INFLATION/DEFLATION MOD. 400 • Shaft puller • Aut. inflation/deflation • Core pusher • Core magazine • Hydraulic elevator • Tilting table • Roll stopper • Power control cab. • Control panel • Hydraulic unit


SHAFT PULLER FULL OPTIONAL DESIGN AUTOMATIC CORE HANDLING AND AUTOMATIC INFLATION/DEFLATION MOD. 400 • Shaft puller • Aut. Inflation/deflation • Core pusher • Core magazine • Hydraulic elevator • Tilting table • Central Tilting Strock • Power control cab. • Control panel • Hydraulic unit


SHAFT PULLER MOD. 400 FULL OPTIONAL WITH TABLE AND INSTALLED FENCES


SHAFT PULLER MOD. 440 WITH TABLE AND INSTALLED FENCES


SHAFT PULLER MOD. 440 WITH TABLE AND INSTALLED FENCES


SHAFT PULLER MOD. 400 WITH TABLE AND INSTALLED FENCES


SHAFT PULLER MOD. 440 FULL OPTIONAL WITH INSTALLED TABLE


SHAFT PULLER MOD. 440 FULL OPTIONAL WITH TABLE


SINGLE CROSS PLATFORMS


SINGLE CROSS PLATFORM

NO LIMIT IN DIMENSION AND LIFTING WEIGHT


DOUBLE CROSS PLATFORM

NO LIMIT IN DIMENSION AND LIFTING WEIGHT


WRAPPING MACHINE MOD. 300


MANUAL AND BATTERY TROLLEYS MOD. 405


MANUAL AND BATTERY TROLLEY MOD. 410

Svecom products  

Presentation of Svecom wide range of products

Read more
Read more
Similar to
Popular now
Just for you