Your design or we will design. Full Color/Full Bleed. Clear Plastic Cover on the face of Button . Buttons are used for many occasions and many reasons. Buttons are used for Campaigning, Fund raising, Promotional Events, etc. Bulk Packaging.
Setup Fee: $20(V)
Repeat Setup Fee: $10(V)
Personalization: $1.00(R)
Photograph: $5(R) PMS Match: $35(V) per color. First time only. Approx. Weight: 2 lbs./100
NAME BADGES - FULL COLOR - FULL BLEED– ALUMINUM
UN4460
Base Color: All name badges begin with a white background. The base color of the entire badge can be covered with a different background color if desired.
DYE SUBLIMATED BADGES
Dye sublimated badges can be made very colorful and designed to suit your organization’s image. The dye will not wash out or scratch off under normal usage. The shelf life of Dye Sublimated Badges is approximately one and one-half years before the colors begin to fade.
MATERIAL
.025” thick white aluminum
Rectangle Badge Corners: 1/8” Radius Corners
FULL BLEED - FULL COLOR
All colors, tints, and full bleed available.
Pricing includes: personalization, positions, departments, etc., which can be different from one badge to the next.
RGB Colors are normally used. If customer’s design is RGB or CMYK, the badge will be made to your design and colors. If a PMS color is specified the PMS Color Match Fee will apply.
Badge pricing does not include back attachment. See Pages 811 & 812 for badge attachment options and prices.
Setup Fee: $50.00(V)
Repeat Setup Fee: $5.00(V)
Approx Weight: 1/2 oz.
PMS Color Match Fee: $35(V) per color. First job only.
Photo: $5.00(R)
Personalization: N/C
Note: UN4463 is a discontinued item with a limited quantity available.
UN4467
NAME BADGES - FULL COLOR - FULL BLEED– ALUMINUM
DYE SUBLIMATED BADGES
Dye sublimated badges can be made very colorful and designed to suit your organization’s image. The dye will not wash out or scratch off under normal usage. The shelf life of Dye Sublimated Badges is approximately one and one-half years before the colors begin to fade.
MATERIAL
.045” thick silver finished aluminum.
Rectangle Badge Corners: 1/8” radius
FULL BLEED - FULL COLOR
All colors, tints, and full bleed available.
Pricing includes: personalization, positions, departments, etc., which can be different from one badge to the next.
RGB Colors are normally used. If customer’s design is RGB or CMYK, the badge will be made to your design and colors. There is no PMS color matching on silver dye sub badges.
Badge pricing does not include back attachment. See Pages 811 & 812 for badge attachment options and prices.
Setup Fee: $50.00(V) Approx Weight: 1/2 oz. Photo: $5.00(R)
Repeat Setup Fee: $5.00(V) Personalization: N/C
UN5950 2” x 3” Gloss Silver
NAME BADGES - FULL COLOR - FULL BLEED
Oval 1-1/2” x 3”
Travel Insurance?
Call: Stacey Combs 458-435-2278
Rectangular 1” x 3”
Pricing includes personalization, positions, departments, etc., that can be different from one badge to the next.
MATERIAL
.090” thick PVC.
DYE SUBLIMATED BADGES
Dye sublimated badges can be made very colorful and designed to suit your organization’s image. The dye will not wash out or scratch off under normal usage. The shelf life of Dye Sublimated Badges is approximately one and one-half years before the colors begin to fade.
Rectangle Badge Corners: Rectangle Badges have 1/8” corner radii.
All colors, tints, and full bleed available.
Rectangular 2” x 3”
RGB Colors are normally used. If customer’s design is RGB or CMYK, the badge will be made to your design and colors. If a PMS color is specified the PMS Color Match Fee will apply.
Badge pricing does not include back attachment. See Pages 811 & 812 for badge attachment options and prices.
Setup Fee: $50.00(V)
Repeat Setup Fee: $5.00(V)
Approx Weight: 1 oz.
PMS Color Match Fee: $35(V) per color. First job only.
Photo: $5.00(R)
Personalization: N/C
CUSTOM LUGGAGE & SPORT BAG TAGS
Back Amanda Burns 123 Oak Drive Richmond, FL 800-555-5555
Full Color custom designed Luggage and Sport Bag identification tags make your baggage easily recognizable. Excellent for Team Bags. Made of durable plastic to withstand everyday use. A pre-cut slot accepts luggage tag straps. Straps are priced separately at the bottom of this page.
Setup Fee: $50(V)
Repeat Setup Fee: $25(V)
PMS Color Match: $35(V) Personalization: $3(V)
Photo: $5(R)
Price includes an imprint on both sides.
210D Leather Strap
220D Plastic Strap
ACRYLIC CLEAR POCKET BADGES
APB10
Badge Only-No Plates
Normal production time applies. Minimum of two. (Setup fee does not apply).
Approximate size:
Front Length: 4”
Width: 2-3/4”
Pocket Insert: 3” long
Acrylic is 1/8” Thick
Personalized Clear Pocket Badges
APB11
1 Engravable Plate
Approx. 2-1/2” x 1/2” Plate is made from Duets Laser XT material.
APB11 & APB12
Customer to supply the Badge or emblem to be attached to the front. Back of emblem must be flat and free of attachments.
Setup Fee:
APB12
2 Engravable Plates
Approx. 2-1/2” x 1/2” Plates are made from Duets Laser XT material.
GEORGE SMITH
JOHN ROBINSON
CUSTOM LASER ENGRAVED NAME BADGES
LASER ENGRAVED PERSONALIZED BADGES
A large selection of color combinations are available including wood grain and granite. The customer selects the font, color combination, and shape.
Lynn Ripley
FRAMES FOR THE OVAL LOL SERIES ARE ON PAGE 809
Engrave Area: 2” x 3”
MATERIAL
See page G01 & G02 for color combinations. .060” (1/16”) thick. PVC. All rectangular badges will have square corners and beveled edges unless specified otherwise.
If requested, the rectangular badge is available with a 1/8” radius on the corners. The rounded corner rectangular badge will not be beveled.
The oval shaped and pocket badges will not be beveled.
BADGE ATTACHMENTS
Badge pricing does not include a back attachment. See Pages 811 & 812 for badge attachment options and prices.
NOTE: Pin Attachments will be glued.
Custom shapes and sizes will be quoted upon request.
The average name badge magnet has a magnetic strength rating of 2500 to 3000. The magnetic strength of the MP313 is 9340.
Swivels Foam Adhesive 1-1/8” Long 1/2” x 2-3/4” Clear Strap
Three Post Plastic covered Rounded Corners Size: 1/2”
Bulldog Clip
Bulldog Clip with Strap
(R)
Bulldog clip with strap can be used with Laser Engraved Materials.
MP313
NAME BADGE LANYARDS
Polyester Lanyard with Bulldog Clip
Made of 1/2” polyester with a metal bulldog clip for easily attaching a photo ID or vinyl badge holder. The lanyard is 17” down the side, or 34” end to end.
Light Blue is also available.
The L601 is a discontinued item with a limited quantity
Lanyards will be shipped unattached.
Lanyards with Hooks
1/2” x 20” long Lanyard with hook and adjustable ball.
Lanyards will be shipped unattached.
White Purple
Yellow Orange Black Royal Blue Green Red
JD201D is a discontinued item with a limited quantity available.
Note: Laser Engraving directly on the desk wedge is not an option. The Piano Finish melts and ruins the Wedge.
ACRYLIC NAME BARS
Setup Fee: $50(V) Approx Weight: 0.9 lbs
Repeat Setup Fee: $25(V) Personalization: $3(V)
W280
Genuine Walnut
8-1/2” Long
RW8W
Walnut Wrap 8” Long
DESK WEDGES
End Profile
The BKZ10K is a discontinued item with a limited quantity available
Note:
Marble Desk Wedged are cut from large marble blocks. No two Marble Desk Wedges have the same color pattern. Some wedges will show the grain and minor chipping may be visible from the manufacturing process.
W281
Genuine Walnut 10-1/2” Long
RW10W
Walnut Wrap 10” Long
RW10
Rosewood 10” Long
RW10K
Ebony 10” Long
BKZ10K
Black Marble 10” Long
Face Height: 2-1/4”
All Desk Wedges on this page have a Piano Finish and include laser engraved plate NP8 or NP10. Other Plate Options: Add $1.00(V) per plate
A. Full Color Dye Sublimated Plate (.020 thick) B. Laser Engraved Plastic Plate (.060 thick). Page G01 & G02
Plate Size:
1-3/4” x 7-1/2” (8” Wedge)
1-3/4” x 9-1/2” (10” Wedge)
Setup Fee: $40.00 (V)
Approx Weight: 0.7 lbs.
Repeat Setup Fee: $20.00(V) Personalization: N/C
NP8 & NP10 Black with gold borderEngraves Gold
(R)
CUSTOM LASERED LEATHERETTE DESK WEDGES
LLW328A 8-3/4” x 1-7/8” H x 2-3/4” W Black
Engraves Vegas Gold Engrave area: 2-1/4” x 8”
LLW3210A
10-3/4” x 1-7/8” H x 2-3/4” Black Engraves Vegas Gold Engrave area: 2-1/4” x 10”
LLW428 8-3/4” x 1-7/8” H x 2-3/4” W Rawhide
Engraves Black Engrave area: 2-1/4” x 8”
LLW528 8-3/4” x 1-7/8” H x 2-3/4” W Gray Engraves Black Engrave area: 2-1/4” x 8”
LLW4210 10-3/4” x 1-7/8” H x 2-3/4” Rawhide
Engraves Black Engrave area: 2-1/4” x 10”
LLW5210 10-3/4” x 1-7/8” H x 2-3/4” Gray Engraves Black Engrave area: 2-1/4” x 10”
****LLW1310****
10-3/4” x 1-7/8” H x 2-3/4”
Business Card Holder Light Brown
Engraves Black
Engrave area: 2-1/4” x 10”
****LLW3310**** 10-3/4” x 1-7/8” H x 2-3/4”
Business Card Holder Black
Engraves Athletic Gold Engrave area: 2-1/4” x 10”
****LLW1310 and LLW3310 are discontinued items with a limited quantity available.
LLW3310A
10-3/4” x 1-7/8” H x 2-3/4”
Business Card Holder Black
Engraves Vegas Gold Engrave area: 2-1/4” x 10”
LLW4310
10-3/4” x 1-7/8” H x 2-3/4”
Business Card Holder Rawhide
Engraves Black Engrave area: 2-1/4” x 10”
LLW5310
10-3/4” x 1-7/8” H x 2-3/4”
Business Card Holder
Gray
Engraves Black Engrave area: 2-1/4” x 10”
Laserable Leatherette offers the look and feel of genuine leather at a fraction of the cost.
Price includes laser engraving. Individually packaged.
