Architecture+Interior

ARC H IT ECTUR A L

EN GIN EERIN G

Sanaz Amirjani

P O RT FOL IO

2023

SANAZ AMIRJANI A r ch i te ct P r o j e ct m a n a g e r Email: Mobile: Linkedin:

sanaz.amirjani@gmail.com +39 340 265 0 495 +31 68 4274276 Click here

INDEX 1 SOFTWARE COMPANY Workplace design for an international IT company

2 SERIO HEIGHT Residential complex for Students and Bocconi university staff residence

3 ROMA HOUSE Luxurious Residential Building Design

4 DUBLIN CAMPUS 23.8 ha of master plan and builing of center for creative design Dublin university future campus

Sanaz Amirjani

D.o.B: 23/07/1987

Building and Architectural Engineer

Email: sanaz.amirjani@gmail.com

Graduated in Master of Building and architectural engineering at Politecnico di Milano with a focus on sustainability and green energy and a wide experience gained in international architecture and construction firms. Managing architectural and design projects with the aim of transforming the built environment into more energy efficient systems. Qualified with a holistic knowledge of design strategies and cutting edge building technologies and methodologies.

Education Mar2017-Oct 2020

Workshops Master of Science, Building and Architectural Engineering Politecnico Di Milano , construction engineering department Milan (Lecco Campus), Italy Thesis subject: Future development of Dublin University Campus, design of intrinsic Master plan (335,000 m2) and a Net zero energy building for the centre of creative design (8000 m2).

An eco-friendly building with renewable and efficient energy solutions, affirming sustainable values, integrated with energy-saving, green technologies and response to changes of climatic conditions and energy demands of its users with technologies like Solar PVs, Geo-thermal energy systems ,HVAC systems and materials.

Sep 2009-Feb 2012

Bachelor of Engineering, Architectural Engineering University of Ahvaz Ahvaz, Iran Thesis subject: Design of A faculty of Architecture in Ahvaz/Iran with technological approaches and energy efficient solutions respecting campus environment and bio diversity.

Sep 2006-Sep 2008

Associate degree, Architectural drawing Azad University of Tehran Tehran, Iran

Certificates 2023 2020 2019 2017 2012

Prince2-Project management Foundation and practitioner BIM application for engineeres - National Taiwan University Augmented reality application for architects - Politecnico di Milano IELTS C1 Level - Tehran IELTS institute Revit Architecture -Tehran Institute of Technology

Augmented and virtual reality for architecture and civil engineering Politecnico di Milano Development of an architectural project scene in unity program and application of Oculus devices for an architectural exhibition in Politecnico Di Milano

Future ways of living 3- Media and Entertainment George Brown college Toronto Design and consultancy of a sustainable future based vision for Media and entertainment sector for year of 2050, aiming to investigate and visualize the past and present forces shaping future which inform an understanding of sustainablity.

Experience Nov 2022- Present

Architect - Project Manager Drees & Sommer Netherlands / Rotterdam, The Netherlands • • • • • •

Responsible of project development from start to hand over Coordinating and managing project tasks and deliverables Point of contact with clients for project progress and timelines Designing office for highend international brands Cost and time management Construction site visits to follow actual progress of the project

•

Projects:

Oct 2020-Apr 2022

- BMW Group - KnowBe4 - Atalmedial

- Drees and sommer Eindhoven office - Global switch

Architectural Engineer Vega Engineering/Milan, Italy • • • • • • •

Apr 2011-Feb 2017

Participating in all phases of design, conceptual design to final stages of construction Designing buildings of different scales such as residential, villas, public buildings, shops, hotels,...

Providing technical detailing of structure and architectural drawings Preparation of municipality drawings and documents for building permits 3D modelling and rendering, from concept to final renders of the building Assisting project manager with reports, timetables and providing inputs for meetings with clients and preparation of daily schedules and work coordination Attending client meetings and consulting them for design, material choices and financial advices

Architectural Engineer Arastoo Group- Construction Company / Tehran, Iran • • • • • • • • •

Apr 2010- Jun 2010

Designing high-end residential, commercial and mixed-use buildings Providing materials list , cost estimation and construction drawings to comply with the project budget Ensuring consistency of MEP drawings with architectural plan Coordinating structural engineers to solve technical problems conflicting architecture design Contributing to construction development with preparation of foundation plans Preparing of drawings with specific building codes for building permit Creating 2D drawings for floor plans of residential and mixed-use buildings Designing of façade with technical details Creating landscape design and interior planning of high-end residential buildings

Trainee Pars Veresk Construction Company / Ahvaz, Iran • • •

Collaborating on design and planning of a refurbishment project Providing materials list, cost estimation and site analysis Responsible for construction reports and drafts

Skills AutoCAD(2D&3D) BIM Revit Indesign Photoshop Office Grasshopper Illustrator Unity QGis Sketchup Rhino Sefaira Excel Lady bug

Languages Farsi English Italian Dutch Arabic

Native Fluent Intermediate Basic Basic

Hobbies Pilates, Friends, Photography, Running, Traveling, Dancing, Meditation, Painting,

Contact me NL +31 684274276

IT +39 3402650495 sanaz.amirjani@gmail.com

O F F I C E D E S I G N INTERNATIONAL SOFTWARE COMPANY - WORKPLACE DESIGN

DREES & SOMMER NETHERLANDS Y. 2023 Supervised by Pim Prins Central Park / Utrecht- The Netherlands

Softwares •

Autocad, Revit, Sketchup, Photoshop, Illustrator,Excel

Main Roles • • • •

Interior designer Project manager Collaboration with team members from conceptual design to final stages of the project Preparation of 2D plans (Autocad ) and 3D modelling (Autocad+ Sketchup)

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

C O N C E P T S flexibility of workspace was the main concept for design.Office space was designed according to the company’s requirement.

Collaboration spaces, focus workstations, different spaces for team work and spaces for recharge of the employes and relaxation areas were all consideres in the design of the space.

Different types of work zones gives the employee the freedom to choose where they want to work .

Various furniture for group activities, different size of meeting rooms and open meeting rooms.

Quiet zones towards the right side of the building, vibrate zones towards the left side and near the existing void was designed.

Vibrant zones: Reception, breakout, meeting spaces, game room lockers and wardrobe. collaboration zones: informal meeting rooms, brain storm space, collaboration space , work space and phone boots Quiet zones , enclosed offices and work spaces.

8

9

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

K I T C H E N E T T E Use of orange color for the service areas that brings more life and at the same time matches with the brand identity of the company gives a perfect contrast with gray and wood used in joinery and chairs.

PET FELT dark green aqustic panels from quadrat was used to give a contrast and vibrant look to the orange floor.

Same color of laminated oak wood was used for joinery and reception area and other wooden furniture in the office.

10

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

S U S T A I N A B I L I T Y

E N G I N E E R I N G

The majority of the world’s GHG emissions come from cities. Initiated by the C40 Cities Climate Leadership Group and made possible thanks to the support of Climate KIC, Reinventing Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented site by C40 competition had the aims to achieved as follow with design of 2500 m2 student residence for Bocconi university and 1500 m2 for staff residentials.

• Building energy efficiency and supply of clean energySustainable materials management and circular economy • Resilience and adaption • Green growth and smart Cities • Biodiversity, urban re-vegetation and agriculture venting Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented

A R C H I T E C T U R E

11

R E C E P T I O N

12

A R C H I T E C T U R E S U S T A I N A B I L I T Y

Wooden joinery are decorated by a natural look of lyon ash and unilin carrara frosted white for the uniqueness of reception desk as the first view of the office space .

E N G I N E E R I N G

A R C H I T E C T U R E

W O R K

S U S T A I N A B I L I T Y

E N G I N E E R I N G

S T A T I O N

Dark orange from Quadrat remix products were used and installed as an aqustic panel in the work zone.

14

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

S U S T A I N A B I L I T Y

E N G I N E E R I N G

The majority of the world’s GHG emissions come from cities. Initiated by the C40 Cities Climate Leadership Group and made possible thanks to the support of Climate KIC, Reinventing Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented site by C40 competition had the aims to achieved as follow with design of 2500 m2 student residence for Bocconi university and 1500 m2 for staff residentials.

• Building energy efficiency and supply of clean energySustainable materials management and circular economy • Resilience and adaption • Green growth and smart Cities • Biodiversity, urban re-vegetation and agriculture venting Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented

A R C H I T E C T U R E

15

S E R I O H E I G H T Residential complex for Students and Bocconi university staff residence

Sustainable Building Technology Course+ Architectural Design Politecnico di Milano / A.Y. 2019 Supervised by Arch. Filopo Pagliani, Roberto Francieri, Gabriele Masera and Matteo Brasca / Via Serio/ Milan- Italy

Softwares •

Autocad, Revit, Sketchup, Sefaira, 3Ds Max, Grasshopper, Naviswork, Ladybug, Photoshop, Illustrator

Main Roles • • • • • • • •

Collaboration with team members from conceptual design to final stages of the project Preparation of 2D plans (Autocad + Revit) and 3D modelling (Revit + Sketchup) Post production using Photoshop BIM 4D modelling (Naviswork) Time Liner simulation Preparation of Management documents (BIM) LOD. EIR, PLQ, Grantt chart, Quantity schedules Energy analysis (Sefaira + Ladybug) Technological Detailing Structural and facade design

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

S E R I O H E I G H T The majority of the world’s GHG emissions come from cities.

Initiated by the C40 Cities Climate Leadership Group and made possible thanks to the support of Climate KIC, Reinventing Cities is a global competition that seeks to transform underutilized sites through sustainable and community-focused projects to drive decarbonised and resilient urban regeneration. Represented site by C40 competition had the aims to achieved as follow with design of 2500 m2 student residence for Bocconi university and 1500 m2 for staff residentials.

• Building energy efficiency and supply of clean energySustainable materials management and circular economy • Resilience and adaption • Green growth and smart Cities • Biodiversity, urban revegetation and agriculture Within this neighborhood the Milanese approach of considering a courtyard is highly employed.

18

DESIGN PROCESS

Articulating S/V ratio and energy consumption regarding the changes. We started from a 0,45 ratio. Arriving to 0,58 we noticed an increase of 6% of the EUI.

SOCIAL AND ISOLATION MODE

To achieve a better solution for interaction, common spaces along side student rooms was designed.

MAXIMUM INTERACTION

To have more interaction among students to enjoy their everyday life, connecting spaces vertically and horizontally was introduced.

MASTERPLAN

VIA SERIO

V IA CO N D IN O

V IA A M P O L A

19

S E R I O H E I G H T COURTYARD Serio residence offers to the residents the choices of privacy complemented with the connections. To promote a sense of belonging and community around the private court space, we designed communal activities.

Shaded gardens are adopted within the private court. Seating are also oriented towards a central focal point to remind the occupants to interact with the residents even while they enjoy private time.

Thus the students and the Milanese families may meet, communicate and interact around the very object that sort to divide them. Now after the initial interaction over the canal residents are further granted the opportunity to meet on the canal.

20

STUDENT RESIDENTIAL

21

S E R I O H E I G H T CONSTRUCTION DRAWING- Section A-A

V.J.12

V.J.17

I.C.01

V.J.14

V.J.13

+11,80

V.C.01

H.P.02

H.C.02

V.P.01

V.J.07

+8,10

H.P.01

V.P.01

V.C.02

V.P.01

V.J.06 H.P.02

V.J.15

V.J.05

B

V.J.19 H.P.01

+4,50

B A

V.J.02 H.C.03

22

+0,00

CONSTRUCTION DRAWING: SECTION A-A - SCALE 1 : 50

A

CV01

CAV

IN01

SR01

AS01

CV05

IN02

SP04

WL01

SP01

SL01

IN05

SB01

SP03 IN01 LBE CAV IN02

CV01 CAV IN01 SR01 AS01 IN02 SP01 IN01 CAV IN02 SP01 SS01 CV02

VERTICAL CLOSURE 01 covering layer ventilated cavity insulation layer strengthening layer atmospheric effects seal layer insulation layer support layer insulation layer cavity insulating layer support layer steam seal layer covering layer

CV05 SP04 WL01 SL01 IN05 SB01 SP03 LBE IN02 CV02

HORIZONTAL PARTITION 02 covering layer support element water seal layer sloped layer insulation layer sliding-block layer load-bearing layer load-bearing element acoustic insulation layer covering layer

IN02 CV02 SP01

CV02

SP06

SP05

IN07

IN06

SP04

SE02

CO02

GR

FL02

WC01

WL02

SL01

IN05

SB01

SP03 LBE

SP07

WV01

IN08

LB01

IN04

NOTES Steel beam IPE 270 Steel plate welded on the main beam, 140 mm long, th. 3 mm Wooden skirting board Border steal beam: UPN 180 Steel L profile, 100 x 100 mm Covering layer composed by glued fibercement panel

LBE

SP02

IN02

CV02

CO02 SE02 SP04 IN06 IN07 SP05 SP06 IN08 WV01 SP07 LBE

INCLINED CLOSURE 01 coated layer separation layer support layer insulation and ventilated layer insulation layer supporting and coating layer secondary support layer insulation layer water vapour barrier layer supporting and coating layer load bearing element

GR FL02 WC01 WL02 SL01 IN05 SB01 SP03 LB01 IN04 LBE SP02 IN02 CV02

HORIZONTAL CLOSURE 02 filling gravel filtering layer water collection layer water leakage layer sloped layer insulation panel sliding-block layer support layer load-bearing layer insulation layer load-bearing element support layer acoustic insulation layer covering layer

A B C D E F

VERTICAL CLOSURE 01 | EXTERNAL VENTILATED WALL CV01 CAV IN01 CV01

CAV

SR01

IN01

SR01

AS01

AS01 IN02

IN02

SP01

SP01

IN01

IN01

IN02

CAV IN02

SP01

SS01

CV02

SP01 SS01 CV02

covering layer: fiber-cement sheet, 60x60x2cm ventilated cavity, th. 5cm insulation layer: double rigid stone wood panel, applied with synthetic resin sticker, density 70kg/m3, λ = 0.035 W/m2K, 100x60cm, th. 6+6cm (type Rockwool) strengthening layer: cement fiber-reinforced panel, 120x90cm, th. 1.25cm (type Aquapanel Kanuf) thermostatic effects seal layer: transpiration polyethylene-fiber membrane, th. 0.18cm (type Tyvek) insulation layer: single glass wood panel, 140x60cm, density 70kg/m3, λ = 0.038 W/ m2K, 100x60cm, th. 4cm (type Rockwool) support layer: zinc-coated steel C-profile, 5x7cm, th. 0.06cm insulation layer: single rigid stone wood panel, applied with synthetic resin sticker, density 70kg/m3, λ = 0.035 W/m2K, 100x60cm th. 4cm (type Rockwool) cavity, th. 3cm: (in the view, plasterboard clamp that links the structures 22x20x1.25cm) insulation layer: single glass wood panel, 140x60cm, density 70kg/m3, λ = 0.038 W/ m2K, 100x60cm, th. 6cm (type Rockwool) support layer: zinc-coated steel C-profile, 5x7cm, th. 0.06cm steam seal layer: aluminum micro-sheet, th. 15 μm covering layer: painted gypsum-covered double panel, 120x200cm, th. 1.25+1.25cm

VERTICAL JOINT 09 | HORIZONTAL PARTITION 01 - VERTICAL CLOSURE 0101

LB01

IN03

FA01

RA01

CV03

SR01 IN01 CAV CV01

CV02

IN02

SP02

CV03 RA01 FA01 IN03 LB01 ST01 SP02 IN02 CV02

HORIZONTAL PARTITION 01 covering layer radiative layer facilities integration layer clomping insulation layer load-bearing layer strength layer support layer acoustic insulation layer covering layer

CV01 CAV IN01 SR01 AS01 IN02 SP01 IN01 CAV IN02 SP01 SS01 CV02

VERTICAL CLOSURE 01 covering layer ventilated cavity insulation layer strengthening layer atmospheric effects seal layer insulation layer support layer insulation layer cavity insulating layer support layer steam seal layer covering layer

LBE

A B C D E F

G H

NOTES Border steel beam: UPN 180 Steel tubular profile, 100 x 50 mm, Steel L profile 120 x 40 mm , th. 3 mm French-door with triple glass U=0,6 W/m2K Steel L profile 100 x 100 mm , th. 3 mm Steel tubular profile, 200 x 60 mm, filled with insulated material and fixed in the concrete with screws in the steel L profile welded on the tubular profile Copper foil screwed in the frame of the windows and layed on the cellular glass element French-door with triple glass U=0,6 W/m2K

E N G I N E E R I N G

CAV

U = 0.14 W/m2K

NOTES Steel profile that supports the water collection system Copper water collection element Supporting wooden element for the water collection, th. 2 cm Steel L profile, 70 x 70 mm Copper foil fixed by ‘‘clip’’ Tuff block 25 x 10 cm’ Wooden beam 22 x 40 cm

S U S T A I N A B I L I T Y

SS01

A B C D E F

VERTICAL JOINT 13 | INCLINED CLOSURE 01 - HORIZONTAL CLOSURE 0201

A R C H I T E C T U R E

VERTICAL JOINT 24 |VERTICAL CLOSURE 01 - HORIZONTAL PARTITION 0201

S E R I O H E I G H T HORIZONTAL JOINT 04 | VERTICAL CLOSURE 01 - SHADING WALL CV02

VERTICAL CLOSURE 01 SS01

CV01

SP01

CAV IN01 SR01

IN02

AS01 IN02

CAV

SP01 IN01

SP01

IN01 CAV IN02 SP01 SS01

IN02

CV02

cladding: porcelain stoneware slab ventilated cavity insulation: double rigid stone wool panel strengthening: cement fiber-cement panel atmospheric effects seal layer insulation: single glass wool panel support: zinc-coated steel C-profile insulation layer: stone wool panel cavity insulating: single glass wool panel support: zinc-coated steel C-profile steam seal: aluminium m crosheet covering: painted gypsum-covered panels NOTES

AS01

SR01

IN01

CAV

CV01

24

A B

Steel pillar: HEB 220 Steel L profile 80 x 60 mm welded to tubular steel profile

CV03 RA01

VERTICAL JOINT 23 |HORIZONTAL PARTITION 01 - VERTICAL CLOSURE 01

FA01 IN03 LB01 ST01 SP02 LB01

IN03

FA01

RA01

CV03 CV01 CAV

IN02 CV02

SR01 AS01

VERTICAL CLOSURE 01 CV01

IN02

CAV IN01

SP01

SR01

IN01

AS01 IN02

CAV IN02

SP01

SP01

IN01

SS01 CV02

CAV IN02 SP01

CV02

NOTES A B CV02

IN02

SP02

LBE

C

Steel beam IPE 270 Steel plate welded on the main beam, 140 mm long, th. 3 mm Wooden skirting board

E N G I N E E R I N G

SS01

cladding: porcelain stoneware slab ventilated cavity insulation: double rigid stone wool panel strengthening: cement fi er-cement panel atmospheric effects seal layer insulation: single glass wool panel support: zinc-coated steel C-profile insulation layer: stone wool panel cavity insulating: single glass wool panel support: zinc-coated steel C-profile steam seal: aluminium m crosheet covering: painted gypsum-co ered panels

S U S T A I N A B I L I T Y

IN01

covering: parquet radiative heating with preshaped polystyrene panel facilities integration: perlite screed clomping insulation: sbr rubber load-bearing: corrugated sheet with reinforced concrete IPE 270 support: double c-profiles structure acoustic insulation: glass wool panel covering: painted gypsum-co ered panels

A R C H I T E C T U R E

HORIZONTAL PARTITION 01

S E R I O H E I G H T To better understand the behavior of our building and the incidence of transparent elements, we first studied the south façade and after the north one. In order to understand the best window/floor ratio for our energetic performance we ran many simulations adding and modifying windows on the south façade, starting from a minimum value of 0,125 (given from the Italian law) and arriving to a 0,5 W/F ratio.

The best energetic result is reached with a W/F ratio of 0,125, U value of 0,6 W/m2K and g value of 0,45. he results show that, in terms of EUI (Energy Use Intensity) the best result is obtained with the south windows (U=0,6 W/ m2K and g=0,45) and a W/F ratio of 0,125. Meanwhile, in terms of heating, the best result is obtained with a W/F ratio of 0,25 and the same thermal properties.

26

OPAQUE TASK

CLADDING SYSTEM EXPOSED VIEW CV01

RA01

CONSTRUCTION PROCESS

LB01

FA01 IN03

1. Fix the U profile to the strenghtening layer ( Aquapanel Knauf) with screws.

D C

A B

CAV02 IN02 IN01 IN02 SR01 IN01 CV01 CAV

CV03 RA01 FA01 IN03 LB01 ST01 SP02 IN02 CV02

HORIZONTAL PARTITION 01 covering layer radiative layer facilities integration layer clomping insulation layer load-bearing layer strength layer support layer acoustic insulation layer covering layer

CV01 CAV IN01 SR01 AS01 IN02 SP01 IN01 CAV IN02 SP01 SS01 CV02

VERTICAL CLOSURE 01 covering layer ventilated cavity insulation layer strengthening layer atmospheric effects seal layer insulation layer support layer insulation layer cavity insulating layer support layer steam seal layer covering layer

A B C D

NOTES Steel beam IPE 270 Steel plate welded on the main beam, 140 mm long, th. 3 mm Steel tubular profile, 160 x 60 mm, filled with insulated material Steel L profile welded on the tubular profile, 250 x 80 mm, th. 3 mm

2. Fix the omega profile to the U profile with screws. The distance between the substructurev depends on the dimension of the panel.

3. Fix the hooks on the omega profile with screws. The distance between the hooks depends on the dimension of the panel.

4. Fix the panel on the hooks. The cavities in the upper and lower part of the panel allows the hook to sustain it without screws.

CV01 CAV IN01 SR01

FA01

IN03

LB01

RA01 CV01

D C

A B

CV02 IN02 CAV IN01 IN02

CV03 RA01 FA01 IN03 LB01 ST01 SP02 IN02 CV02

HORIZONTAL PARTITION 01 covering layer radiative layer facilities integration layer clomping insulation layer load-bearing layer strength layer support layer acoustic insulation layer covering layer

CV01 CAV IN01 SR01 AS01 IN02 SP01 IN01 CAV IN02 SP01 SS01 CV02

VERTICAL CLOSURE 01 covering layer ventilated cavity insulation layer strengthening layer atmospheric effects seal layer insulation layer support layer insulation layer cavity insulating layer support layer steam seal layer covering layer

SR01 INO1 CV01

A B

CAV

C D

NOTES Steel beam IPE 270 Steel plate welded on the main beam, 140 mm long, th. 3 mm Steel tubular profile, 160 x 60 mm, filled with insulated material Steel L profile welded on the tubular profile, 250 x 80 mm, th. 3 mm

IN02 IN01 CAV IN02 SS01

IN03 A B SP02 CV02

CV02

C CV01

FA01 LB01

CV03 RA01 FA01 IN03 LB01 ST01 SP02 IN02 CV02 CV01 CAV IN01 SR01 AS01 IN02 SP01 IN01 CAV IN02 SP01 SS01 CV02 A B

HORIZONTAL PARTITION 01 covering layer radiative layer facilities integration layer clomping insulation layer load-bearing layer strength layer support layer acoustic insulation layer covering layer VERTICAL CLOSURE 01 covering layer ventilated cavity insulation layer strengthening layer atmospheric effects seal layer insulation layer support layer insulation layer cavity insulating layer support layer steam seal layer covering layer NOTES Steel beam IPE 270 Steel plate welded on the main beam, 140 mm long, th. 3 mm Wooden skirting board

C

27

E N G I N E E R I N G S U S T A I N A B I L I T Y A R C H I T E C T U R E 28

SLIDING SHUTTER The sliding shutter is made by MEG (abet laminati) which is a self supporting high pressure laminate(HPL) suitable for exteriors. Thikness of the frame= 50 mm measurement of the lamina inside =20x50x140mm The panel will be used in order to improve the daylight and energetical comfort inside the bedroom. In particular, in winter, the panel can be closed and put on the side of the balcony, in order to maximise the solar gains.

EAST ROOM’S SIMULATION ON VELUX WITH SLIDING SHUTTER

Comparing our values we can state that our building is in CLASS A3 The final performance is furtherly improved if we consider the renewable energy production. EUI = 24,7 kWh/m2/year Annual energy cost = 5976 €.

29

R O M A

H O U S E Luxurious Residential Building Design

Professional Project Arastoo group construction Company / March 2016 Supervised by Arch. Ali Hassanzadeh /Tehran-Iran

Softwares •

Autocad 2D and 3D, Revit, Photoshop, 3Ds Max

Main Roles • • • • • • • • •

Plan and Facade design regarding clients desire and budget Preparation of documents and plans for building permits Preparation of 2D plans (AutoCAD) and 3D modelling (AutoCAD 3D + Revit) Cost estimation and Material list preparation Collaborating with site manager for updating plans and facade based on changes in construction site Preparation of construction plans and site preparation plans during the construction phase and consistently applying changes happening during construction period Technological Detailing Weekly report of project progress to Lead Architect Checking for conflicts between structural drawings and architectural plans and facade and giving suggestions on how to solve them.

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

R O M A

H O U S E SOUTH FACADE

32

A R C H I T E C T U R E S U S T A I N A B I L I T Y

The client’s intention was to build and design an eye-catching luxury building. Neoclassical style seemed like an ideal answer for design of a luxurious residential apartment.

E N G I N E E R I N G

This project was a high-end residential apartment locating in north region of Tehran, c capital of Iran. An eight floor building containing a total of 24 residential flats containing all welfare facilities such as gym, pool, an extensive lobby and a hall for private occasions of residents.

R O M A

H O U S E

34

UCATIONAL PRODUCT

COLUMN DETAIL

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

R O M A

H O U S E

FACADE DETAIL

PRODUCED BY AN AUTODESK

PRODUCED BY AN AUTODESK ED

36

A R C H I T E C T U R E PRODUCED BY AN AUTODESK EDUCATIONAL PRODUCT

S U S T A I N A B I L I T Y

E N G I N E E R I N G

D U B L I N C A M P 23.8 ha of master plan and builing of center for creative design Dublin university future campus

Master of Science Thesis Project Politecnico di Milano / A.Y. 2020 Supervised by Arch.Roberto Francieri, Angela Clucci / Belfield/ Dublin 4, Ireland

Softwares •

Autocad, Sketchup, Sefaira, Lumion, Grasshopper, Transys, Ladybug, Photoshop, Illustrator

Main Roles • • • • • • • •

Collaboration with team members from conceptual design to final stages of the project Urban analysis, Masterplan and Landscape design (Autocad + Sketchup + Photoshop ) Preparation of 2D plans (Autocad ) and 3D modelling ( Autocad 3D + Sketchup + Rhino/Grasshopper ) Post production using Photoshop Energy analysis (Sefaira + Ladybug) Technological Detailing Structural and facade design Research for urban concept and synthesis map

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

D U B L I N C A M P University College Dublin - Future Campus was an International design competition managed by Malcolm Reading Consultants.

University College Dublin (UCD) is Ireland’s Offering a strongly diverse mix of academic disciplines, UCD attract 30,000 students for over 120 countries annually. The project is in two parts: 1) An Entrance Precinct Masterplan, 2) Centre for Creative Design building.

The Entrance Precinct Masterplan covers an area of 23.8 ha, within which the University sees a potential to accommodate up to 335,000 sq m of new development. The first building to be delivered within the Entrance Precinct Masterplan is the 8,000 sq m Centre for Creative Design.

Design of external spaces varies according to the location and relation to the building.

These spaces vary from open to close, private and social, simple and complex.

Different types of activities such as open air amphitheater, spots for individuals to study and be relaxed, gathering spots for students of each faculty that has visual connection with other faculties and all the campus.

40

4 1

2

5 3

6

8 7

3 11 10

MASTERPLAN

1. ENTRANCE PLAZA 2.OPEN AIR WORKSHOPS 3.MAIN LAKE

The urban concept was shaped around two main ideas, one was the existing social hubs (lakes) and the other is old and historical buildings and landscapes in the campus.

4.SHUTTLE BUS STOP 5.GATHERING PLAZA 6.IRISH GARDEN WALKWAY 7.OPEN AIR THEATER 8.COVERED WALKWAY 9.OPEN EXHIBITION

A historical Irish garden which dates back to 18 century called secret garden and many more historical buildings. In this masterplan people will experience the past, feature and the present.

10.PARKING LOT

9

11.SHUTTLE BUS 12

12.OPEN AIR LIBRARY 13 15

13.OPEN AIR LIBRARY 14.OPEN GYM 15.URBAN FARMING

Considering main social cores(two waterbodies) and connecting these two with the entrance to make them visible and generate people flow.

41

D U B L I N C A M P MASTERPLAN Pushing the buildings together to make a neighborhood for students and draw them together not to push them away from each other, to feel the closeness, build up a social trust and to have a denser and happier space was the reason to connect all of the green spaces of each faculty together and make their social life alive and active.This way we can turn a place into space and make a location feel like home and make communities out of faculties that can built up families and feeling of trust and belonging among students.

42

OPEN AIR STUDY

RELAXING SLOPES

OPEN LIBRARY

OPEN AIR ThEATER

43

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

The majority of the world’s GHG emissions come from cities. Initiated by the C40 Cities Climate Leadership Group and made possible thanks to the support of Climate KIC, Reinventing Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented site by C40 competition had the aims to achieved as follow with design of 2500 m2 student residence for Bocconi university and 1500 m2 for staff residentials.

• Building energy efficiency and supply of clean energySustainable materials management and circular economy • Resilience and adaption • Green growth and smart Cities • Biodiversity, urban re-vegetation and agriculture venting Cities is a global competition that seeks to transform underutilized sites through sustainable and communityfocused projects to drive decarbonised and resilient urban regeneration. Represented

44

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

A R C H I T E C T U R E

S U S T A I N A B I L I T Y

E N G I N E E R I N G

S U S T A I N A B I L I T Y

E N G I N E E R I N G

Parameterization of Bridge connection The site access routes change after the intervention of the masterplan. These are the main routes of access to our project area and pave way to the main building that connects city to the site and make a memorable vision for cars and pedestrians passing along the university.

A R C H I T E C T U R E

45

D U B L I N C A M P

RESULTANT EQUIVALENT DISPLACEMENTS

STRUCTURAL DESIGN

SECONDARY COLUMN LOAD CALCULATIONS

SHEAR FORCE DIAGRAMS MOMENT DIAGRAMS PRIMARY COLUMN LOAD CALCULATIONS

Masterplan Blocks

46

Masterplan Blocks

Main Building

Typical floor Primary Beams Load Calculations. To begin the design of the structure, the variable and permanent loads are first calculated. They are defined as follows; Permanent loads (G) are constant during the service life of the building. The calculation consists of;

•Permanent loads (G1): self-weight of the structural elements •Permanent loads (G2): self-weight of the non-structural elements •Variable loads (Q) change over the duration of the building’s service life.

•Live loads: self-weight of the equipment or people present within the building

•Snow loads: self-weight of snow based on the specified region and applied to the external roofing element.

•Wind loads: pressure and suction values are calculated for both the longitudinal and transversal sides of the building

E N G I N E E R I N G

Retrofitted Bridge

S U S T A I N A B I L I T Y

BENDING MOMENT DIAGRAMS

A R C H I T E C T U R E

LOAD CALCULATIONS

D U B L I N

C A M P

Roof Covering with integrated PV modules

2 3

Slab on grade

U [W/m2K]

0.138

Rw [dB]**

42,56

Mass [kg/m ]

168,5

f [h]

-7.35

Fire reaction

90

2

2 3 4

4

5

5

6

6

7 7

8

8

1 2 3 4 5 6 7 8

48

Photovoltaic modules - Dim. 1,0 x 1,5 m Substructure: tubular steel sections system for PV panels - Dim. 50x20mm Waterproof and insulating layer: rockwool sandwich panel with aluminum coating - λ: 0,04 W/mk ρ: 50 kg/ m3 - Thic. 8 cm Insulating layer: EPS panels - λ: 0,030 W/mK ρ: 15 kg/m3 - Thic. 2x10 cm Load bearing layer: galvanized corrugated steel sheet with reiforced concrete topping - Heigh. 50mm Concrete thic. 3 cm Secondary structure: IPE 200 steel section Primary structure: IPE 400 steel section Substructure: suspended false ceiling system Finishing and reverberation control layer: double gypsum board with rockwool insulation - Thic. 2x1.25 cm and 5 cm

1

Finishing layer: concrete pavement for veichles - ρ: 300 kg/m3 - Thic. 3 cm

2 Levellig layer: medium density concrete screed - ρ: 600 kg/m3 - Thic. 5 cm 3 Separation layer: polyethylene vapor barrier - Sd: 40 m - Thic. 0,22 mm 4 Insulating layer: EPS panels - λ: 0,030 W/mK ρ: 15 kg/m3 - Thic. 2x10 cm 5 Load bearing layer: reiforced concrete topping with electrically welded mesh - Thic.10 cm 6 Ventilation layer: crawl space made by plastic modular formworks - Heigh. 30 cm 7 Levelling layer: lean mortar - ρ: 100 kg/m3 - Thic. 5 cm 8 Drainage layer: gravel - Thic. 5 cm

taking into account the Annual Sun Exposure, rooms exposed to southeast may be affected by glare, as the ASE value may suggets.

On the north and east facades as we have diffused light and in order to filter light, we used vertical fins.

Taking into consideration all the strategies we were able to reduce the consumption of the building from 117 kWh/m2/yera to 27 kWh/m2/year.

S U S T A I N A B I L I T Y

On the south facade to reduce the radiation alowing inside the building and to avoid the heat gains on the facade system, full facade casing with offset has been conavoid consideredsidered

A R C H I T E C T U R E

NORTH FACADE ASSEMBLIES

E N G I N E E R I N G

R E S I P R O C I T Y

Sanaz 50

Email:

sanaz.amirjani@gmail.com

Mobile:

+31 68427 4276

Linkedin:

Click here