SKĀBBARĪBAS PIEKABE EUROPROFI COMBILINE

97+125.02.1013

Silage wagon with loading rotor

Find out more online

W NE

EUROPROFI COMBILINE

The new multi talented EUROPROFI COMBILINE

!

EW

N

In order to meet the different operating conditions of loader wagons and customers' individual requirements, PÖTTINGER now offers the EUROPROFI 4510, 5010 and 5510 as combined loader/transport wagons.

Multi-purpose, even more output and equipped with 1.53" / 39 mm short chop capability, these new loader wagons are ready for action.

EUROMATIC PLUS loading rotor

!

EW

N

The new EUROMATIC+ rotor mounted on self-aligning roller bearings is even more capable, rugged and designed for a long service life. The high capacity loading rotor has eight rows of tines (16" / 800 mm diameter, Durostat 500 fine-grained steel) with 0.98" / 25 mm wide scrapers to ensure perfect chopping quality for a low power requirement. Maximum loading performance without torque peaks ensures uniform chopping and high compression in the loading chamber. The individually slotted and bolted scrapers ensure a low power requirement.

Perfect ground tracking Best forage collection The PÖTTINGER floating pick-up with height-adjustable jockey wheels at both ends ensures perfect ground tracking to protect the sward. The low tine speed conserves the forage while it is being collected.

6 tine carriers with solid cam track at both ends Rugged cam track rollers with twin-race sealed, deep-groove ball bearings Newly-developed wind guard

2

W NE New pick-up support roller !

EW

N This newly-developed additional support roller is located behind the middle of the pick-up. Thanks to the unique parallelogram guidance linkage, it ensures significantly improved contour tracking for clean forage. Being located in the centre prevents it from sinking into tractor wheel marks.

Up to 20% higher capacity

!

EW

N

The loading rotor is driven by the rugged splined input shaft via a sidemounted bevel gearbox. The gearbox is designed for up to 162 kW / 220 hp. The PTO shaft is protected to 1800 Nm for 11% more drive power.

Lowered scraper floor

N !

EW

The scraper floor has been lowered at the front by 5.9" / 150 mm so that tyres up to 710/45 R 22,5 can be fitted. Powerful floor chains ensure rapid unloading. The forage is conveyed upwards to the rear, leading to uniform and smooth discharge. A 2-speed motor is available as an option.

3

Razor sharp EUROPROFI COMBILINE

The new POWERCUT chopping system !

EW

N The chopping system has been completely re-developed with 35 knives for a theoretical chop length of 1.53" / 39 mm. The knife bank is conveniently swung out hydraulically to the side from the tractor seat using the operator terminal.

TWINBLADE reversible knife

!

EW

N

The newly-developed and patented geometry of the reversible TWINBLADE knife guarantees double the service life. A continuous perfect cut is ensured while replacement knives are always on-board.

EASY MOVE – Pivoting knife bank The newly-developed and patented EASY MOVE pivoting knife bank provides an unmatched level of easy knife changes: the knives are locked and released using a centralised lever system.

!

EW

N

Better protection for the knives The patented Non-Stop individual knife protection system features a spring for each knife with integrated trigger mechanism. This guarantees reliable protection against foreign objects with an automatic reset function.

4

HWE NUE NE IT Rugged and lightweight extension !

EW

N The robust chassis is built using a bolted frame construction with close pillar spacing and lightweight panel profiles. The bodywork is completely closed and no crop snags on the tapered mudguards.

One front flap – two functions

!

EW

N

The newly-developed front wall can be equipped with a 2-function front flap to enable a rapid change between loading and transport mode, controlled from the tractor seat.

The automatic loading system is equipped with two sensors. Compression is adjusted using pressure springs to provide an ideal match to the power of the tractor.

Discharge beaters – rapid and precise distribution N !

EW

The two beaters facilitate uniform unloading thanks to a new, more powerful and aggressive design of beater (twist design). The automatic discharge system ensures uniform distribution.

5

Smooth ride Drawbar and chassis

The drawbar, chassis and tyres are designed for high loads and high transport speeds.

Robust, narrow drawbar with 4409 lbs / 2 t supported load Hydraulic drawbar with 2 double-acting cylinders and parking stand.

Suspended tandem axles Parabolic springs with wide support spacing of 43.30" / 1100 mm Compensation arms and linkage for equal load on both axles Robust longitudinal links absorb braking forces and axle guidance Air brakes - Optional Hydraulic Brakes

EUROPROFI COMBILINE

4510 L / 4510 D

5010 L / 5010 D

5510 L / 5510 D

–

–

–

–

–

–

High drawbar, supported load 2 t Low drawbar, supported load 2 t Rotating eye or ball hitch Drawbar shock absorber Tandem axle parabolic springs 13 t axle load Tandem axle parabolic springs 16 t axle load Tandem axle parabolic springs BPW 18 t axle load

–

Steered trailing axle Tyres 560/45 R 22.5 Tyres 620/40 R 22.5 Tyres 710/35 R 22.5 Tyres 710/45 R 22.5

–

Permissible total weight 15 t Permissible total weight 18 t Permissible total weight 20 t = Standard,

6

= Optional

– All data not binding, equipment may vary from country to country.

W NE

EUROPROFI COMBILINE

4510 L / 4510 D

5010 L / 5010 D

5510 L / 5510 D

1588 / 45

1765 / 50

1941 / 55

918/882 / 26/25

1023/988 / 29/28

1129/1094 / 32/31

72.83 / 1850

72.83 /1850

72.83 / 1850

35

35

35

1.53 / 39

1.53 / 39

1.53 / 39

Loading area length inch / mm

223/213 / 5680/5420

250/240 / 6360/6100

277/267 / 7040/6790

Loading area width inch / mm

82 / 2100

82 / 2100

82 / 2100

Length inch / mm

348/351 / 8440/8920

359/377 / 9120/9600

385/404 / 9800/10280

Width inch / mm

98 / 2510

98 / 2510

98 / 2670

Height inch / mm

143 / 3650

143 / 3650

143 / 3650

4510 L / 4510 D

5010 L / 5010 D

5510 L / 5510 D

/

/

/

Load capacity cu ft / m3 DIN volume cu ft / m3 Pick-up width inch / mm Number of knives Knife spacing inch / mm

Terminals POWER CONTROL Terminal POWER CONTROL Wireless ISOBUS Terminal CCI = Standard,

= Optional

Equipment options for all wagons PTO shaft 1 3/8" 21-spline PTO shaft 8x32x38 Additional pick-up support roller Hydraulic pick-up weight alleviation Tailgate switch for scraper floor Load sensing 2-speed motor for scraper floor

All data not binding, equipment may vary from country to country.

Hydraulic folding automatic loading flap Access door Hydraulic brakes Loading chamber and work lights Demarcation and limit lights Video system with monitor and camera Flashing beacon for loader wagon

7

W NE Perfect control DIRECT CONTROL for wagons without beaters All functions can be selected directly. The brightness of the graphic display and illuminated keys is adjustable.

POWER CONTROL – all the convenience of electronic controls for wagons with beaters The ISOBUS-compatible POWER CONTROL terminal features an allgraphic colour display and comprehensive function keys. All functions are performed directly to offer the highest level of convenience for your work.

Alois PÖTTINGER Maschinenfabrik GmbH Industriegelände 1, 4710 Grieskirchen, Austria Phone +43 7248 600-0, Fax +43 7248 600-2513 info@poettinger.at, www.poettinger.at

Europrofi Combiline en 1013

PÖTTINGER ISOBUS Terminal CCI The PÖTTINGER CCI ISOBUS Terminal offers a completely new level of control. In addition to offering a comprehensive range of functions, this operator terminal enables you to conveniently control ISOBUS machines from different manufacturers.